thesis page margin

• Graduate School
• Current Students
• Dissertation & Thesis Preparation

Formatting Requirements

Page layout, margins and numbering.

Your scholarly approach may call for a different presentational method. These are the requirements and recommendations for text-based theses.

For a text-based thesis, or the text portions of a thesis, the page size must be 8.5" x 11", and the text must be in a single, page-wide column. Do not use two or more columns in your thesis.

The text of the thesis is written in paragraph form.

• the first line of each paragraph should be indented, OR
• there should be a larger space between paragraphs than there is between lines.

Each chapter should generally start at the top of a new page.

Left: 1.25 inches (32 mm) is recommended if you intend to bind copies of your thesis; 1 inch minimum.

Right, top, and bottom: 1 inch recommended; 0.75 inches (19 mm) minimum

Page Numbering

Preliminary pages:.

• must be numbered in lower case Roman numerals (ii, iii, iv, etc.)
• the title page is "i" but this number must not appear on the page
• numbering begins at "ii" on the committee page
• the first page of the abstract is page iii

Body of thesis:

• must be numbered in Arabic numerals (1, 2, 3, etc.)
• the first page of the text is "1"
• subsequent pages are numbered continuously throughout, including pages with tables and figures, bibliographies, appendices, and index

Whole thesis:

• every page except the title page must have a number on it
• there must be no blank pages in the thesis.

Page numberS:

• must be placed at least .5 inches (12 mm) from the edge of the page
• may be either in the lower centre or on the top or lower right of the page, when the page is viewed in portrait view. Lower right is preferred.

Landscape Pages

Landscape pages must be orientated in your PDF so that they are readable without rotation. You do not need to change the location or orientation of the page number, but may if you wish.

Facing Pages

Facing pages are not acceptable; you must use one-sided layout and pagination. If the caption for a figure, table, etc., cannot appear on the same page as its accompanying illustration, place the illustration on a separate page after the caption.

• Why Grad School at UBC?
• Graduate Degree Programs
• Application & Admission
• Info Sessions
• Research Supervisors
• Research Projects
• Indigenous Students
• International Students
• Tuition, Fees & Cost of Living
• Newly Admitted
• Student Status & Classification
• Student Responsibilities
• Supervision & Advising
• Managing your Program
• Health, Wellbeing and Safety
• Professional Development
• Final Doctoral Exam
• Final Dissertation & Thesis Submission
• Life in Vancouver
• Vancouver Campus
• Graduate Student Spaces
• Graduate Life Centre
• Life as a Grad Student
• Graduate Student Ambassadors
• Meet our Students
• Award Opportunities
• Award Guidelines
• Minimum Funding Policy for PhD Students
• Killam Awards & Fellowships
• Policies & Procedures
• Information for Supervisors
• Dean's Message
• Leadership Team
• Strategic Plan & Priorities
• Vision & Mission
• Equity, Diversity & Inclusion
• Initiatives, Plans & Reports
• Graduate Education Analysis & Research
• Media Enquiries
• Newsletters
• Giving to Graduate Studies

Strategic Priorities

• Strategic Plan 2019-2024
• Improving Student Funding
• Promoting Excellence in Graduate Programs
• Enhancing Graduate Supervision
• Advancing Indigenous Inclusion
• Supporting Student Development and Success
• Reimagining Graduate Education
• Enriching the Student Experience

Initiatives

• Public Scholars Initiative
• 3 Minute Thesis (3MT)
• PhD Career Outcomes
• Great Supervisor Week

Thesis and Dissertation Guide

• « Thesis & Dissertation Resources
• The Graduate School Home

• Introduction
• Copyright Page
• Dedication, Acknowledgements, Preface (optional)
• Table of Contents
• List of Tables, Figures, and Illustrations
• List of Abbreviations
• List of Symbols

Non-Traditional Formats

Font type and size, spacing and indentation, tables, figures, and illustrations, formatting previously published work.

• Internet Distribution
• Open Access
• Registering Copyright
• Using Copyrighted Materials
• Use of Your Own Previously Published Materials
• Submission Steps
• Submission Checklist
• Sample Pages

II. Formatting Guidelines

All copies of a thesis or dissertation must have the following uniform margins throughout the entire document:

• Left: 1″ (or 1 1/4" to ensure sufficient room for binding the work if desired)
• Right: 1″
• Bottom: 1″ (with allowances for page numbers; see section on Pagination )
• Top: 1″

Exceptions : The first page of each chapter (including the introduction, if any) begins 2″ from the top of the page. Also, the headings on the title page, abstract, first page of the dedication/ acknowledgements/preface (if any), and first page of the table of contents begin 2″ from the top of the page.

Non-traditional theses or dissertations such as whole works comprised of digital, artistic, video, or performance materials (i.e., no written text, chapters, or articles) are acceptable if approved by your committee and graduate program. A PDF document with a title page, copyright page, and abstract at minimum are required to be submitted along with any relevant supplemental files.

Fonts must be 10, 11, or 12 points in size. Superscripts and subscripts (e.g., formulas, or footnote or endnote numbers) should be no more than 2 points smaller than the font size used for the body of the text.

Space and indent your thesis or dissertation following these guidelines:

• The text must appear in a single column on each page and be double-spaced throughout the document. Do not arrange chapter text in multiple columns.
• New paragraphs must be indicated by a consistent tab indentation throughout the entire document.
• The document text must be left-justified, not centered or right-justified.
• For blocked quotations, indent the entire text of the quotation consistently from the left margin.
• Ensure headings are not left hanging alone on the bottom of a prior page. The text following should be moved up or the heading should be moved down. This is something to check near the end of formatting, as other adjustments to text and spacing may change where headings appear on the page.

Exceptions : Blocked quotations, notes, captions, legends, and long headings must be single-spaced throughout the document and double-spaced between items.

Paginate your thesis or dissertation following these guidelines:

• Use lower case Roman numerals (ii, iii, iv, etc.) on all pages preceding the first page of chapter one. The title page counts as page i, but the number does not appear. Therefore, the first page showing a number will be the copyright page with ii at the bottom.
• Arabic numerals (beginning with 1, 2, 3, 4, etc.) start at chapter one or the introduction, if applicable. Arabic numbers must be included on all pages of the text, illustrations, notes, and any other materials that follow. Thus, the first page of chapter one will show an Arabic numeral 1, and numbering of all subsequent pages will follow in order.
• Do not use page numbers accompanied by letters, hyphens, periods, or parentheses (e.g., 1., 1-2, -1-, (1), or 1a).
• Center all page numbers at the bottom of the page, 1/2″ from the bottom edge.
• Pages must not contain running headers or footers, aside from page numbers.
• If your document contains landscape pages (pages in which the top of the page is the long side of a sheet of paper), make sure that your page numbers still appear in the same position and direction as they do on pages with standard portrait orientation for consistency. This likely means the page number will be centered on the short side of the paper and the number will be sideways relative to the landscape page text. See these additional instructions for assistance with pagination on landscape pages in Microsoft Word .

Format footnotes for your thesis or dissertation following these guidelines:

• Footnotes must be placed at the bottom of the page separated from the text by a solid line one to two inches long.
• Begin at the left page margin, directly below the solid line.
• Single-space footnotes that are more than one line long.
• Include one double-spaced line between each note.
• Most software packages automatically space footnotes at the bottom of the page depending on their length. It is acceptable if the note breaks within a sentence and carries the remainder into the footnote area of the next page. Do not indicate the continuation of a footnote.
• Number all footnotes with Arabic numerals. You may number notes consecutively within each chapter starting over with number 1 for the first note in each chapter, or you may number notes consecutively throughout the entire document.
• Footnote numbers must precede the note and be placed slightly above the line (superscripted). Leave no space between the number and the note.
• While footnotes should be located at the bottom of the page, do not place footnotes in a running page footer, as they must remain within the page margins.

Endnotes are an acceptable alternative to footnotes. Format endnotes for your thesis or dissertation following these guidelines:

• Always begin endnotes on a separate page either immediately following the end of each chapter, or at the end of your entire document. If you place all endnotes at the end of the entire document, they must appear after the appendices and before the references.
• Include the heading “ENDNOTES” in all capital letters, and center it 1″ below the top of the first page of your endnotes section(s).
• Single-space endnotes that are more than one line long.
• Number all endnotes with Arabic numerals. You may number notes consecutively within each chapter starting over with number 1 for the first note in each chapter, or you may number notes consecutively throughout the entire document.
• Endnote numbers must precede the note and be placed slightly above the line (superscripted). Leave no space between the number and the note.

Tables, figures, and illustrations vary widely by discipline. Therefore, formatting of these components is largely at the discretion of the author.

For example, headings and captions may appear above or below each of these components.

These components may each be placed within the main text of the document or grouped together in a separate section.

Space permitting, headings and captions for the associated table, figure, or illustration must be on the same page.

The use of color is permitted as long as it is consistently applied as part of the finished component (e.g., a color-coded pie chart) and not extraneous or unprofessional (e.g., highlighting intended solely to draw a reader's attention to a key phrase). The use of color should be reserved primarily for tables, figures, illustrations, and active website or document links throughout your thesis or dissertation.

The format you choose for these components must be consistent throughout the thesis or dissertation.

Ensure each component complies with margin and pagination requirements.

Refer to the List of Tables, Figures, and Illustrations section for additional information.

If your thesis or dissertation has appendices, they must be prepared following these guidelines:

• Appendices must appear at the end of the document (before references) and not the chapter to which they pertain.
• When there is more than one appendix, assign each appendix a number or a letter heading (e.g., “APPENDIX 1” or “APPENDIX A”) and a descriptive title. You may number consecutively throughout the entire work (e.g., 1, 2 or A, B), or you may assign a two-part Arabic numeral with the first number designating the chapter in which it appears, separated by a period, followed by a second number or letter to indicate its consecutive placement (e.g., “APPENDIX 3.2” is the second appendix referred to in Chapter Three).
• Include the chosen headings in all capital letters, and center them 1″ below the top of the page.
• All appendix headings and titles must be included in the table of contents.
• Page numbering must continue throughout your appendix or appendices. Ensure each appendix complies with margin and pagination requirements.

You are required to list all the references you consulted. For specific details on formatting your references, consult and follow a style manual or professional journal that is used for formatting publications and citations in your discipline.

Your reference pages must be prepared following these guidelines:

• If you place references after each chapter, the references for the last chapter must be placed immediately following the chapter and before the appendices.
• If you place all references at the end of the thesis or dissertation, they must appear after the appendices as the final component in the document.
• Select an appropriate heading for this section based on the style manual you are using (e.g., “REFERENCES”, “BIBLIOGRAPHY”, or “WORKS CITED”).
• Include the chosen heading in all capital letters, and center it 1″ below the top of the page.
• References must be single-spaced within each entry.
• Include one double-spaced line between each reference.
• Page numbering must continue throughout your references section. Ensure references comply with margin and pagination requirements.

In some cases, students gain approval from their academic program to include in their thesis or dissertation previously published (or submitted, in press, or under review) journal articles or similar materials that they have authored. For more information about including previously published works in your thesis or dissertation, see the section on Use of Your Own Previously Published Materials and the section on Copyrighting.

If your academic program has approved inclusion of such materials, please note that these materials must match the formatting guidelines set forth in this Guide regardless of how the material was formatted for publication.

Some specific formatting guidelines to consider include:

• Fonts, margins, chapter headings, citations, and references must all match the formatting and placement used within the rest of the thesis or dissertation.
• If appropriate, published articles can be included as separate individual chapters within the thesis or dissertation.
• A separate abstract to each chapter should not be included.
• The citation for previously published work must be included as the first footnote (or endnote) on the first page of the chapter.
• Do not include typesetting notations often used when submitting manuscripts to a publisher (i.e., insert table x here).
• The date on the title page should be the year in which your committee approves the thesis or dissertation, regardless of the date of completion or publication of individual chapters.
• If you would like to include additional details about the previously published work, this information can be included in the preface for the thesis or dissertation.

Previous: Order and Components

Next: Distribution

Ohio State nav bar

• The Ohio State University
• BuckeyeLink
• Find People
• Search Ohio State

Formatting Guidelines For Theses, Dissertations, and DMA Documents

Guidelines for Formatting Theses, Dissertations, and DMA Documents is intended to help graduate students present the results of their research in the form of a scholarly document.

Before beginning to write a master’s thesis, PhD dissertation, or DMA document, students should read the relevant sections of the  Graduate School Handbook, section 7.8  for dissertations and/ or  section 6.4  for master’s theses.

Candidates for advanced degrees should also confer with their advisors and members of their graduate studies committees to learn about any special departmental requirements for preparing graduate degree documents.

Members of the graduation services staff at the Graduate School are available to provide information and to review document drafts at any stage of the planning or writing process. While graduation services is responsible for certifying that theses and/or dissertations have been prepared in accordance with Graduate School guidelines, the student bears the ultimate responsibility for meeting these requirements and resolving any related technical and/or software issues . Graduation services will not accept documents if required items are missing or extend deadlines because of miscommunication between the student and the advisor.

Accessibility Features

As of Spring, 2023, all theses and dissertations will need to incorporate the following accessibility features to align with the university’s accessibility policy.  When you submit your final document to OhioLINK you will be verifying that accessibility features have been applied.

• PDF file includes full text
• PDF accessibility permission flag is checked
• Text language of the PDF is specified
• PDF includes a title

Features and Other Notes

Some features are required, and some are optional. Each component is identified with a major heading unless otherwise noted. The major heading must be centered with a one-inch top margin. 

Sample Pages and Templates

Templates are available for use in formatting dissertations, theses, and DMA documents. Please read all instructions before beginning. 

• Graduate Dissertations and Theses Templates - OSU Login Required

FRONTISPIECE (OPTIONAL)

If used, no heading is included on this page.

TITLE PAGE (REQUIRED)

The title page should include:

• the use of title case is recommended
• dissertation, DMA. document, or thesis
• Presented in Partial Fulfillment of the Requirements for the Degree [insert the applicable degree such as Doctor of Philosophy, Doctor of Musical Arts, Master of Science, etc.] in the Graduate School of The Ohio State University
• Name of the candidate 
• Initials of previous earned degrees
• insert correct name from program directory
• Year of graduation
•  Dissertation, document, or thesis [select applicable title] committee and committee member names

COPYRIGHT PAGE (REQUIRED)

Notice of copyright is centered in the following format on the page immediately after the title page. This page is not identified with a page number.

Copyright by John James Doe 2017

ABSTRACT (REQUIRED)

The heading Abstract is centered without punctuation at least one inch from the top of the page. The actual abstract begins four spaces below the heading. See sample pages.

DEDICATION (OPTIONAL)

If used, the dedication must be brief and centered on the page.

ACKNOWLEDGMENTS

(OPTIONAL, BUT STRONGLY RECOMMENDED)

Either spelling of the word, acknowledgments or acknowledgments, is acceptable. The acknowledgment is a record of the author’s indebtedness and includes notice of permission to use previously copyrighted materials that appear extensively in the text. The heading Acknowledgments is centered without punctuation at least one inch from the top of the page.

VITA (REQUIRED)

Begin the page with the heading Vita, centered, without punctuation, and at least one inch from the top of the page. There are three sections to the vita: biographical information (required), publications (if applicable), and fields of study (required).

There is no subheading used for the biographical information section. In this section, include education and work related to the degree being received.

Use leader dots between the information and dates. The publication section follows. The subheading Publications should be centered and in title case. List only those items published in a book or journal. If there are none, omit the Publication subheading. The final section of the vita is Fields of Study, which is required. Center the subheading and use title case. Two lines below the Fields of Study subheading, place the following statement: Major Field: [insert only the name of your Graduate Program as it reads on the title page] flush left. Any specialization you would like to include is optional and is placed flush left on the lines below Major Field.

TABLE OF CONTENTS (REQUIRED)

The heading Table of Contents (title case preferred) appears without punctuation centered at least one inch from the top of the page. The listing of contents begins at the left margin four spaces below the heading. The titles of all parts, sections, chapter numbers, and chapters are listed and must

be worded exactly as they appear in the body of the document. The table of contents must include any appendices and their titles, if applicable. Use leader dots between the listed items and their page numbers.

LISTS OF ILLUSTRATIONS (REQUIRED IF APPLICABLE)

Lists of illustrations are required if the document contains illustrations. The headings List of Tables , List of Figures , or other appropriate illustration designations (title case preferred) appear centered without punctuation at least one inch from the top of the page. The listing begins at the left margin four spaces below the heading. Illustrations should be identified by the same numbers and captions in their respective lists as they have been assigned in the document itself. Use leader dots between the listed items and their page numbers. See sample pages .

BIBLIOGRAPHY/REFERENCES (REQUIRED)

Include a complete bibliography or reference section at the end of the document, before the appendix, even if you have included references at the end of each chapter. You may decide how this section should be titled. The terms References or Bibliography are the most commonly chosen titles. The heading must be centered and at least one inch from the top of the page.

Include this heading in the table of contents.

APPENDICES (REQUIRED IF APPLICABLE)

An appendix, or appendices, must be placed after the bibliography. The heading Appendix (title case preferred) centered at least one inch from the top of the page. Appendices are identified with letters and titles. For example: Appendix A: Data. Include all appendix headers and titles in the table of contents.

Other Notes

Candidates are free to select a style suitable to their discipline as long as it complies with the format and content guidelines given in this publication. Where a style manual conflicts with Graduate School guidelines, the Graduate School guidelines take precedence. Once chosen, the style must remain consistent throughout the document.

Top, bottom, left, and right page margins should all be set at one inch. (Keep in mind that the left margin is the binding edge, so if you want to have a bound copy produced for your personal use, it is recommended that the left margin be 1.5 inches.)

It is recommended that any pages with a major header, such as document title, chapter/major section titles, preliminary page divisions, abstract, appendices, and references at the end of the document be set with a 2-inch top margin for aesthetic purposes and to help the reader identify that a new major section is beginning.

The selected font should be 10 to 12 point and be readable. The font should be consistent throughout the document. Captions, endnotes, footnotes, and long quotations may be slightly smaller than text font, as long as the font is readable.

Double spacing is preferred, but 1.5 spacing (1.5 × the type size) is acceptable for long documents. Single spacing is recommended for bibliography entries, long quotations, long endnotes or footnotes, and long captions. Double spacing between each bibliography entry is recommended.

Each major division of the document, including appendices, must have a title. Titles must be centered and have at least a one inch top margin. The use of title case is recommended. If chapters are being used, they should be numbered and titled. For example: Chapter 1: Introduction. Appendices are identified with letters and titles. For example: Appendix A: Data.

PAGE NUMBERS

Every page must have a page number except the title page and the copyright page. If a frontispiece is included before the title page, it is neither counted nor numbered. The page numbers are centered at the bottom center of the page above the one inch margin. Note: You may need to set the footer margin to 1-inch and the body bottom margin to 1.3 or 1.5- inches to place the page number accurately.

Preliminary pages (abstract, dedication, acknowledgments, vita, table of contents, and the lists of illustrations, figures, etc.) are numbered with small Roman numerals (i, ii, iii, iv, etc.). Page numbering begins with the first page of the abstract, and this can be either page i or ii (The title page is technically page i, but the number is not shown on the page).

Arabic numerals are used for the remainder of the document, including the text and the reference material. These pages are numbered consecutively beginning with 1 and continue through the end of the document.

Notation practices differ widely among publications in the sciences, the humanities, and the social sciences. Candidates should confer with their advisors regarding accepted practice in their individual disciplines. That advice should be coupled with careful reference to appropriate general style manuals.

• Arabic numerals should be used to indicate a note in the text. 
• Notes may be numbered in one of two ways: either consecutively throughout the entire manuscript or consecutively within each chapter.
• Notes can be placed at the bottom of the page (footnotes) or at the end of a chapter or document (endnotes). Once chosen, the notation style must be consistent throughout the document.
• Notes about information within tables should be placed directly below the table to which they apply, not at the bottom of the page along with notes to the text.

ILLUSTRATIONS

Tables, figures, charts, graphs, photos, etc..

Some documents include several types of illustrations. In such cases, it is necessary that each type of illustration (table, figure, chart, etc.) be identified with a different numbering series (Table 1, Table 2, and so on, or Chart 1, Chart 2, and so on). For each series, include a list with captions and page numbers in the preliminary pages (for example, List of Tables, List of Charts, etc.). These lists must be identified with major headings that are centered and placed at the two-inch margin.

Each illustration must be identified with a caption that includes the type of illustration, the number, and a descriptive title (for example, Map 1: Ohio). Numbering may be sequential throughout the document (including the appendix, if applicable) or based on the decimal system (corresponding to the chapter number, such as Map 2.3: Columbus). When using decimal numbering in an appendix, the illustration is given a letter that corresponds with the appendix letter (for example, Figure A.1: Voter Data). Captions can be placed either above or below the illustration, but be consistent with the format throughout the document. If a landscape orientation of the illustration is used, make sure to also orient the illustration number and caption accordingly. The top of the illustration should be placed on the left (binding) edge of the page.

If an illustration is too large to ft on one page it is recommended that you identify the respective pages as being part of one illustration. Using a “continued” notation is one method. For example, the phrase continued is placed under the illustration on the bottom right hand side of the first page. On the following pages, include the illustration type, number, and the word continued at the top left margin; for example, Map 2: Continued. Whatever method you choose just make sure to be consistent. The caption for the illustration should be on the first page, but this does not need repeated on subsequent pages.

If an illustration is placed on a page with text, between the text and the top and/or bottom of the illustration, there must be three single spaced lines or two double spaced lines of blank space. The same spacing rule applies if there are multiple illustrations on the same page. The top/bottom of the illustration includes the caption.

All final Ph.D. dissertations, DMA. documents, and master’s theses are submitted to the Graduate School through OhioLINK at https://etdadmin. ohiolink.edu. The document must be saved in PDF embedded font format (PDF/A) before beginning the upload at OhioLINK. During the submission process, OhioLINK will require an abstract separate from your document. This abstract has a 500-word limit. You will get a confirmation from OhioLINK that the submission is complete. The submission then goes to the Graduate School for review. After it is reviewed by staff of the Graduate School, you will receive an email that it has been accepted or that changes need to be made. If changes are required, you will need to re-submit the revised document via an amended OhioLINK submission. You will receive an “accepted” email from the Graduate School once the document has been approved.

THESIS OR DISSERTATION IN A FOREIGN LANGUAGE

The Graduate School has no policy specifically permitting graduate degree documents to be written in a foreign language. The practice is allowed as long as it is approved by the student’s advisor and Graduate Studies Committee. Documents in a foreign language must comply with the following requirements:

• The title page must be in English, but the title itself may be in the same language as the document.
• If the title is in a language using other than Roman characters, it must be transliterated into Roman character equivalents.
• The abstract must be in English.
• The academic unit must notify the Graduate School of dissertations in a foreign language so that an appropriate graduate faculty representative can be found to participate in the final oral examination

Dissertation and Theses

The dissertation is the hallmark of the research expertise demonstrated by a doctoral student. It is a scholarly contribution to knowledge in the student’s area of specialization. 

A thesis is a hallmark of some master’s programs. It is a piece of original research, generally less comprehensive than a dissertation and is meant to show the student’s knowledge of an area of specialization.

Still Have Questions?

Dissertations & Theses 614-292-6031 [email protected]

Doctoral Exams, Master's Examination, Graduation Requirements 614-292-6031 [email protected]

Thesis & Dissertation: Guidelines for Masters and PhD Programs

General guidelines for formatting dissertation or thesis.

In formatting your dissertation or thesis, you must follow the guidelines for page composition presented on the following requirements. General guidelines are shown first; specific guidelines relative to each section of your dissertation or thesis follow.

Pagination for Body of Dissertation or Thesis

• Use continuous Arabic numbers (beginning with 1) inthe same size font as the text for the body of the dissertation or thesis.
• Page numbers are placed at the bottom of the page,centered between the margins. There should always be at least a 24-point space between the page number and the text.
• Chapters within the text begin on new pages.
• There are no format requirements for chapter headings. You should use a format that is standard in your field and be consistent for all chapters.
•  There should be no page breaks between sections or before tables or figures, unless they occur naturally. (Exception: If the bibliography is placed at the end of each chapter, a page break needs to be placed at the end of the text and the bibliography started on the next page. The page number stays at the bottom of the page.)
• In a dissertation or thesis with two volumes, the second must continue the numbering of the first part. Each volume must contain a title page (labelled beneath the title with the words “Volume I” or “Volume II”), and the title page of the second volume is counted as a text page but the numeral is not printed on the page.

Pagination for Preliminary Pages

• Preliminary pages are numbered consecutively, usinglowercase Roman numerals in the same size font as the text, centered between the margins, at least 0.5 inch from the bottom of the page.
• Page numbering starts with the biographical sketch,which is numbered as “iii.” (The title page and copyright page are counted but not numbered; the abstract is neither counted nor numbered.) Every preliminary page thereafter is numbered, including multiple pages within a section.

Exact margins are absolutely essential so that the dissertation or thesis can be microfilmed in its entirety for interlibrary loan. After photocopying, margins must be at least:

• Left margin: 1.5 inches or slightly larger.
• Top, bottom, right margins: 1 inch or slightly larger.

(Hint: It is recommended that you set margins at 1.6 inches for the left margin and 1.1 inches for all other margins, since photocopying may enlarge the text by as much as 2 percent.) These margins apply to all pages, including those with tables and figures.

Justification

• Left-aligned, ragged right margins are preferred.
• If you are using a computer or word processor, usejustified margins only if the computer does this well, i.e., does not separate punctuation from characters or leave large gaps in the text.

The dissertation or thesis must contain correct vertical spacing (or 24-point spacing), which is defined as three lines of type and three line spaces per vertical inch throughout the text. Microsoft Word users: go to Format/Paragraph/Indents and Spacing/Line spacing and choose “Exactly.” Set the points at 24. (To check that the font is three lines per inch, place a ruler vertically on the page and measure from the top of the first line to the top of the fourth line.) Exceptions:

• Quotations and footnotes may be single-spaced within each entry.
• Lengthy tables may be single-spaced.
• In an M.F.A. thesis, irregular spacing is permitted to accommodate poetry, some of which is written single-spaced, some triple-spaced, and some with variable spacing.

The Body of the Dissertation or Thesis

• Appendix (or Appendices) (optional)

Bibliography (or References or Works Cited)

• If using a PC, the following fonts and font sizes are acceptable:
• Times New Roman 12
• Helvetica 12
• Times 14 (Times 12 is not acceptable)
• Other fonts may be acceptable (but Courier is not).Check the font with the Thesis Advisor.
• Footnotes may be single-spaced in a 10-point size but must be in the same font as the rest of the text.

Equations, Formulas, and Sub- and Superscripts

• All equations and formulas should be typeset.
• When a computer, word processor, or typewriter cannot make the symbol, insertions by hand are acceptable.
• Equations also may be inserted from a non-matching typewriter or laser-printer font.
• All subscripts and superscripts must be large enough to be read on microfilm. (To ensure readability on microfilm, test a page with sub- or superscripts by photocopying the page using a 25 percent text reduction. If the sub- or superscripts are still readable, then they are large enough.)

Corrections

Strikeovers, correction fluid, and correction tape are not acceptable in the filed copies.

Widows and Headings Separated from Text

•  A dissertation or thesis will not be accepted if it contains “widows” (short lines ending a paragraph at the top of a page) at the end of a chapter.
•  A dissertation or thesis will not be accepted if it contains a heading or subhead at the bottom of a page that is separate from its respective text on the following page.
• In addition to the general formatting guidelines shown above, the following specific guidelines must be followed for each individual section of your dissertation or thesis.

Required Sections, Guidelines, and Suggestions

Required yes.

Typeset the title in all capital letters, centered within the left and right margins, correctly spaced, about 1.5 inches from the top of the page. • Carefully select words for the title of the dissertation or thesis to represent the subject content as accurately as possible. Words in the title are important access points to researchers who may use keyword searches to identify works in various subject areas. • Use word substitutes for formulas, symbols, superscripts, Greek letters, etc. Below the title, at the vertical and horizontal center of the margins, correctly spaced, position the following five lines (all centered): Line 1: A Dissertation [or Thesis] Line 2: Presented to the Faculty of the Weill Cornell Graduate School Line 3: of Medical Sciences Line 4: in Partial Fulfillment of the Requirements for the Degree of Line 5: Doctor of Philosophy [or other appropriate degree] • Center the following three lines within the margins, 1.5 inches from the bottom of the page: Line 1: by Line 2: [name under which you are registered in the University Registrar’s Office] Line 3: [month and year of degree conferral, not the date the dissertation or thesis is submitted; no comma between month and year]

Copyright page

A notice of copyright should appear as the sole item on the page (there is no page heading), centered vertically and horizontally within the margins: © 201_ [student’s registered name] • The copyright symbol is a lower case “c,” which must be circled. (On Macintosh computers, the symbol is typed by pressing the “option” and “g” keys simultaneously. If the font does not have the © symbol, type the “c” and circle it by hand. On PCs, go to the insert menu, choose “symbol,” and highlight the © symbol.)

Required ? Yes

Doctoral candidates.

The heading of the abstract in a dissertation is centered between the left and right margins about 1.1 inches down from the top of the page; it includes the following lines: TITLE OF DISSERTATION Student’s Name, Ph.D. Cornell University 201_ [year of conferral]

• Following the heading lines, skip one 24-point-spaced line and begin the text of the abstract on the same page.
• The abstract should state the problem, describe the methods and procedures used, and give the main results or conclusions of the research.
• The abstract must not exceed 350 words in length (generally about one-and-one-half correctly spaced pages; the abstract may not be more than two pages).

Master’s candidates

• The page heading of the abstract in a thesis is simply the word “ABSTRACT” in all capital letters, centered within the margins at the top of the page. (The thesis abstract does not display the thesis title, author’s name, degree, university, or date of degree conferral.)
•  The abstract must not exceed 600 words in length (approximately two-and-one-half to three pages of correctly spaced typing).

Biographical Sketch

The biographical sketch must be written in third-person voice and contain your educational background. It may contain additional biographical facts.

• As a page heading, use “BIOGRAPHICAL SKETCH” in all capital letters, centered on the page.
•  Number this page as iii. (This is the first numbered preliminary page.)

Dedication 

Required optional.

No title is used on the page.

• The text is centered on the page and can be shown in italic or regular type.
• Text on this page does not need to be in English

Acknowledgments

• The acknowledgments may be written in first-person voice. If your research has been funded by outside grants, you should check with the principal investigator of the grant regarding proper acknowledgment of the funding source. Most outside funding sources require some statement of acknowledgment of the support; some also require a disclaimer from responsibility for the results.
• As a page heading, use “ACKNOWLEDGMENTS” in all capital letters, centered on the page.

Table of Contents

As a page heading, use “TABLE OF CONTENTS” in all capital letters, centered on the page.

• List the sections/chapters of the body of the dissertation or thesis; also list preliminary sections starting with the biographical sketch. (The title page, copyright page, and abstract are not listed.)
• If the dissertation or thesis consists of two volumes, list “Volume II” as a section in the table of contents.
• Page numbers must be listed in a column to the right of each section or chapter title; only the first page of each chapter or section is stated (not a range of page numbers, such as 7–22).
• The table of contents may be single-spaced.

List of Figures and List of Illustrations

Required if included.

As a page heading, use “LIST OF FIGURES” or "LIST OF ILLUSTRACTIONS" in all capital letters, centered on the page.

• The list must contain enough of the titles or descriptions so that readers can locate particular items using the list. (It may not be necessary to include entire figure/illustration captions.)
• The list must contain the page number on which each figure or illustration is found, as in a table of contents.
• The list of figures/ illustrations may be single-spaced.
• Figures/ illustrations must be placed as close as possible to their first mention in the text. They may be placed on a page with no text above or below, or they may be placed directly into the text. If a figure is placed directly into the text, text may appear above or below the figure/illustration/table; no text may wrap around the figure/illustration/table.
• If a figure/illustration appears on a page without other text, it must be centered vertically within the margins on the page.
• Figures/ Illustrations may not be placed at the end of the chapter or at the end of the dissertation or thesis.
• Figure/illustration must be either continuous throughout the dissertation or thesis, or by chapter (e.g., 1.1, 1.2; 2.1, 2.2, etc.). The word “Figure,”  "Illustration" must be spelled out (not abbreviated), and the first letter must be capitalized.
• A caption for a figure/illustration must be placed at the bottom of the figure.
•  If the figure/illustration not including the caption, takes up the entire page, the figure/illustration caption must be placed alone on the preceding page and centered vertically and horizontally within the margins. (When the caption is on a separate page, the List of Figures, List of Illustrations  will list the page number containing the caption.)
• If the figure/illustration not including the caption, takes up more than two pages it must be preceded by a page consisting of the caption only. The first page of the figure/illustration must include the figure/illustration (no caption), and the second and subsequent pages of the figure/illustration/table must also include, at the top of the figure/illustration/table, words that indicate its continuance—for example, “Figure 5 (Continued)”—and on these pages the caption is omitted.
• If figures/illustrations are too large, they may be slightly reduced so as to render a satisfactory product or they must either be split into several pages or be redone. If a figure/illustration is reduced, all lettering must be clear, readable, and large enough to be legible. All lettering, including subscripts, must still be readable when reduced 25 percent beyond the final version. All page margin requirements must be maintained. Page numbers and headings must not be reduced. Figure/illustration captions must be in the same font and font size as the text, not reduced.
• The caption of a figure may be single-spaced, but then captions for all figures/illustrations/tables must be single-spaced.
• Horizontal figures/ illustrations must be positioned correctly—i.e., the top of the figure/illustration will be at the left margin of the vertical page of the dissertation or thesis (remember: pages are bound on the left margin). Figure/illustration headings/captions are placed with the same orientation as the figure/illustration when they are on the same page as the figure/illustration. When they are on a separate page, headings/captions are always placed in vertical orientation, regardless of the orientation of the figure/ illustration.
• Page numbers are always placed as if the figure/illustration was vertical on the page.

List of Tables

• As a page heading, use ““LIST OF TABLES” in all capital letters, centered on the page.
• There must be separate pages for “LIST OF TABLES” even if there is only one example of each.
• The list must contain enough of the titles or descriptions so that readers can locate particular items using the list. (It may not be necessary to include entire table captions.)
• The list must contain the page number on which each  table is found, as in a table of contents.
• The list of tables may be single-spaced.
• Tables must be placed as close as possible to their first mention in the text. They may be placed on a page with no text above or below, or they may be placed directly into the text. If a table is placed directly into the text, text may appear above or below the figure/illustration/table; no text may wrap around the figure/illustration/table.
• If a table appears on a page without other text, it must be centered vertically within the margins on the page.
• Tables may not be placed at the end of the chapter or at the end of the dissertation or thesis.
• Table numbering must be either continuous throughout the dissertation or thesis, or by chapter (e.g., 1.1, 1.2; 2.1, 2.2, etc.). The word “Table” must be spelled out (not abbreviated), and the first letter must be capitalized.
•  A caption for a table must be placed above the table.
• If the table, not including the caption, takes up the entire page, the table caption must be placed alone on the preceding page and centered vertically and horizontally within the margins. (When the caption is on a separate page, the List of Tables will list the page number containing the caption.)
• If the table, not including the caption, takes up more than two pages it must be preceded by a page consisting of the caption only. The first page of the table must include the table (no caption), and the second and subsequent pages of the table must also include, at the top of the table, words that indicate its continuance—for example, “Figure 5 (Continued)”—and on these pages the caption is omitted.
• If tables are too large, they may be slightly reduced so as to render a satisfactory product or they must either be split into several pages or be redone. If a table is reduced, all lettering must be clear, readable, and large enough to be legible. All lettering, including subscripts, must still be readable when reduced 25 percent beyond the final version. All page margin requirements must be maintained. Page numbers and headings must not be reduced.
• Table captions must be in the same font and font size as the text, not reduced.
• The caption of a figure/illustration/table may be single-spaced, but then captions for all figures/illustrations/tables must be single-spaced.
•  Horizontal tables must be positioned correctly—i.e., the top of the table will be at the left margin of the vertical page of the dissertation or thesis (remember: pages are bound on the left margin). Table headings/captions are placed with the same orientation as the table when they are on the same page as the table. When they are on a separate page, headings/captions are always placed in vertical orientation, regardless of the orientation of the table.

List of Abbreviations

•  As a page heading, use “LIST OF ABBREVIATIONS” in all capital letters, centered on the page.

List of Symbols

•  As a page heading, use “LIST OF SYMBOLS” in all capital letters, centered on the page.
• As a page heading, use “PREFACE” in all capital letters, centered on the page.

Body of the Dissertation or Thesis: Text, Appendix, Bibliography

•  Chapter headings may be included that conform to the standard of your academic field.
• Textual notes that provide supplementary information, opinions, explanations, or suggestions that are not part of the text must appear at the bottom of the page as footnotes. Lengthy footnotes may be continued on the next page. Placement of footnotes at the bottom of the page ensures that they will appear as close as possible in the microfilm to the referenced passage.
•  Footnotes may be single-spaced in a 10-point size but must be in the same font as the text.
• Footnotes should be numbered with superscripted Arabic numerals. Numbering can be continuous throughout the dissertation or thesis or may start again for each chapter or page, but the method used must be consistent throughout the document. (Once footnotes have been numbered, any footnotes that are inserted later will require the renumbering of all footnotes to accommodate the newly inserted one. Amending the existing footnote numbers by adding letters to distinguish repeated Arabic numerals—for example, 12a, 12b—is not allowed.)

Published Material.

• If the material in any chapter has already been published or accepted for publication, written permission from the publisher authorizing the student to use it in the dissertation must be submitted.
• On the first page of all published chapters, type an asterisk (*) next to the title(s). The asterisk should appear again at the bottom of the page, followed by a complete reference to the publication.

Appendix (or Appendices)

•  As a page heading, use “APPENDIX” in all capital letters, centered on the page.
•  Place in an appendix any material that is peripheral but relevant to the main text of the dissertation or thesis, such as survey instruments, additional data, computer printouts, details of a procedure or analysis, a relevant paper that you wrote, etc.
•  The appendix may include text that does not meet the general font and spacing requirements of the other sections of the dissertation or thesis.
• As a page heading, use “BIBLIOGRAPHY” (or “REFERENCES” or “WORKS CITED”) in all capital letters, centered on the page.
•  Bibliographies may be single-spaced within each entry but must be 24-point-spaced between entries.
• The Graduate School recommends that you follow the standard citation format used by a major journal in your academic field and that the style be consistent throughout the dissertation or thesis. (Also see “References for Style and Format.”)

For more information please read the Graduate Degree Requirements: Instructions for Doctoral Dissertation and Thesis Preparation:

Fair Use, Copyright, Patent, and Publishing Options

1. Is information that you plan to include from others considered “fair use” and are you acknowledging these sources correctly?

You are responsible for acknowledging any facts, ideas, or materials of others that you include in your work. You must follow the guidelines for acknowledging the work of others in the “Code of Academic Integrity and Acknowledging the Work of Others” (published in the Policy Notebook for the Cornell Community).

If you use any copyrighted material in the dissertation or thesis, it is your responsibility to give full credit to the author and publisher of work quoted. The acknowledgment should be placed in a footnote at the bottom of the first page of the paper or chapter. Additionally, you must determine whether use of the material can be classified as a “fair use” by performing an analysis of your use of each copyrighted item. Please access the Copyright sources at Weill Cornell Library here. These resources are helpful tools for performing this analysis. (See also, Copyright Law and the Doctoral Dissertation: Guidelines to Your Legal Rights and Responsibilities , published by ProQuest, or The Chicago Manual of Style, published by the University of Chicago Press.)

If your use of material is not considered a “fair use,” you must obtain written permission from the copyright owner. Two copies of each permission letter must be submitted with the dissertation or thesis. ProQuest has specific requirements for the content of the permission letter. For these guidelines, consult the ProQuest Doctoral Dissertation Agreement form (published by ProQuest).

If you have already published or had accepted for publication part of your own dissertation or thesis material in a journal, depending on the terms of your publication agreement, it may be necessary to write to that journal and obtain written authorization to use the material in your dissertation.

2. Embargo of online copies

The value of your dissertation extends well beyond your graduation requirements. It’s important that you make an informed decision about providing online access, via ProQuest and eCommons, to your work. This decision can expand the visibility and impact of your work, but it can also shape the options available to you for publishing subsequent works based on your dissertation.

ProQuest’s ProQuest Dissertations and Theses (PQDT) database indexes almost all dissertations published in the U.S. and provides subscription access online to the full text of more recent dissertations. ProQuest also sells print copies of dissertations, paying royalties to authors, when they exceed a minimum threshold. Authors retain copyright in the works they submit to ProQuest.

eCommons is a service of the Cornell University Library that provides long-term, online access to Cornell-related content of enduring value. Electronic theses and dissertations deposited in eCommons, unless subject to embargo, are freely accessible to anyone with an internet connection. When submitting to eCommons, you retain copyright in your work. Ph.D. dissertations and master’s theses submitted to ProQuest are automatically submitted to eCommons, subject to the same embargo you select for ProQuest.

Electronic copies of dissertations in PQDT or eCommons may be made accessible immediately upon submission or after an embargo period of six months, one year, or two years. You may wish to consider an embargo period which helps address publishers’ interests in being the first to publish scholarly books or articles, while also ensuring that scholarship is accessible to the general public within a reasonable period of time. Your decision should be made in consultation with your special committee.

3. Creative Commons license

Creative Commons licenses provide authors with a straightforward and standardized means of prospectively granting certain permissions to potential users of the author’s material. Authors may request proper attribution, permit copying and the creation of derivative works, request that others share derivative works under the same terms and allow or disallow commercial uses. Authors may even choose to place their works directly into the public domain. You will have the option of selecting a Creative Commons license when you upload your dissertation or thesis to ProQuest, and your choice will automatically be applied to the copy of your work in eCommons.

4. Has a patent application been filed (or will one be) on the basis of your thesis or dissertation research?

Cornell University Policy 1.5 governs inventions and related property rights and MSK’s Policy on Intellectual Property . Inventions made by faculty, staff, and students must be disclosed to the Center for Technology Licensing at Cornell University (CTL). Theses and dissertations describing patentable research should be withheld from publication, in order to avoid premature public disclosure. Use the delayed release (embargo) option if a patent application is or will be in process, noting the reason for the delay as “patent pending.” If you have any questions, please contact Cornell’s Center for Technology Licensing at 607-254-4698 or [email protected] .

5. Register for copyright?

Copyright law involves many complex issues that are relevant to you as a graduate student, both in protecting your own work and in referencing the work of others. Discussion of copyright in this publication is not meant to substitute for the legal advice of qualified attorneys. A more detailed discussion of copyright law can be found in the publication from ProQuest entitled Copyright Law and the Doctoral Dissertation: Guidelines to Your Legal Rights and Responsibilities by Kenneth D. Crews.

Copyright protection automatically exists from the time the work is created in fixed form and the copyright immediately becomes the property of the author. Registration with the United States Copyright Office is not required to secure copyright; rather it is a legal formality to place on public record the basic facts of a particular copyright. Although not a condition of copyright protection itself, registering the copyright is ordinarily necessary before any infringement suits can be filed in court.

To register a copyright for your dissertation or thesis, register online or download printable forms . You may also request forms by mail from the Information Section, U.S. Copyright Office, Library of Congress, Washington, D.C. 20559, or contact them by telephone at 202-707-3000.

Doctoral candidates: You may authorize ProQuest to file, on your behalf, an application for copyright registration. This option will be presented to you as part of the submission process.

6. Supplementary materials

If supplementary materials (audio, video, datasets, etc., up to 2GB per file) are part of your thesis or dissertation, you may submit them as supplementary files during the online submission process. For help selecting long-lived file formats, note ProQuest’s guidance in their document, “Preparing Your Manuscript for Submission (Including Supplemental Files).” File formats for which ProQuest does not guarantee migration may still have a high likelihood of preservation in Cornell’s digital repository; please see the eCommons help page for further guidance.

Do not embed media files in the PDF version of your thesis or dissertation, as this can significantly increase the size of the file and make it difficult to download and access. Include a description of each supplementary file in the abstract of your thesis or dissertation. You may include an additional supplementary file containing more detailed information about the supplementary materials as a “readme” file or other form of documentation; this is particularly advisable for data sets or code. The Research Data Management Service Group ( [email protected] ) offers assistance in preparing and documenting data sets for online distribution.

7. Make your work discoverable on search engines?

ProQuest offers authors the option of making their graduate work discoverable through major search engines including Yahoo, Google, Google Scholar, and Google Books. If you chose the Search Engine option on their dissertation “paper” publishing agreement or within ProQuest’s PROQUEST ETD Administrator (electronic submission service), you can expect to have your work appear in the major search engines.

If you change your mind and do not want your work to be made available through search engines, you can contact customer service at [email protected] or 800-521-0600 ext. 77020. In addition, if you did not initially adopt this option but now want your works made available through this service, contact the customer service group to change your selection. Please note that search engines index content in eCommons, regardless of the choice you make for ProQuest.

Weill Cornell Medicine Graduate School of Medical Sciences 1300 York Ave. Box 65 New York, NY 10065 Phone: (212) 746-6565 Fax: (212) 746-8906

Graduate School

• Make a Gift

Organizing and Formatting Your Thesis and Dissertation

Learn about overall organization of your thesis or dissertation. Then, find details for formatting your preliminaries, text, and supplementaries.

Overall Organization

A typical thesis consists of three main parts – preliminaries, text, and supplementaries. Each part is to be organized as explained below and in the order indicated below:

1. Preliminaries:

• Title page (required)
• Copyright page (required)
• Abstract (required) only one abstract allowed
• Acknowledgments (optional) located in the Preliminary Section only
• Preface (optional)
• Autobiography (optional)
• Dedication (optional)
• Table of Contents (required)
• List of Tables (optional)
• List of Figures (optional)
• List of Plates (optional)
• List of Symbols (optional)
• List of Keywords (optional)
• Other Preliminaries (optional) such as Definition of Terms

3. Supplementaries:

• References or bibliography (optional)
• Appendices (optional)
• Glossary (optional)
• List of Abbreviations (optional)

Preliminaries

These are the general requirements for all preliminary pages.

• Preliminary pages are numbered with lower case Roman numerals.
• Page numbers are ½” from the bottom of the page and centered.
• The copyright page is included in the manuscript immediately after the title page and is not assigned a page number nor counted.
• The abstract page is numbered with the Roman numeral “ii”.
• The remaining preliminary pages are arranged as listed under “Organizing and Formatting the Thesis/Dissertation” and numbered consecutively.
• Headings for all preliminary pages must be centered in all capital letters 1” from the top of the page.
• Do not bold the headings of the preliminary pages.

A sample Thesis title page pdf is available here ,  and a sample of a Dissertation title page pdf is available here.

Refer to the sample page as you read through the format requirements for the title page.

• Do not use bold.
• Center all text except the advisor and committee information.

The heading “ Thesis ” or “ Dissertation ” is in all capital letters, centered one inch from the top of the page.

• Your title must be in all capital letters, double spaced and centered.
• Your title on the title page must match the title on your GS30 – Thesis/Dissertation Submission Form

Submitted by block

Divide this section exactly as shown on the sample page. One blank line must separate each line of text.

• Submitted by
• School of Advanced Materials Discovery 
• School of Biomedical Engineering
• Graduate Degree Program in Cell and Molecular Biology
• Graduate Degree Program in Ecology

If your department name begins with “School of”, list as:

• School of Education
• School of Music, Theatre and Dance
• School of Social Work

If you have questions about the correct name of your department or degree, consult your department. Areas of Study or specializations within a program are not listed on the Title Page.

Degree and Graduating Term block

• In partial fulfillment of the requirements
• For the Degree of
• Colorado State University
• Fort Collins, Colorado (do not abbreviate Colorado)

Committee block

• Master’s students will use the heading Master’s Committee:
• Doctoral students will use the heading Doctoral Committee:
• The Master’s Committee and Doctoral Committee headings begin at the left margin.
• One blank line separates the committee heading and the advisor section.
• One blank line separates the advisor and committee section.
• Advisor and committee member names are indented approximately half an inch from the left margin.
• Titles before or after the names of your advisor and your members are not permitted (Examples – Dr., Professor, Ph.D.).

Copyright Page

• A sample copyright page pdf is available here.
• A copyright page is required.
• A copyright page is included in the manuscript immediately after the title page.
• This page is not assigned a number nor counted.
• Center text vertically and horizontally.
• A sample abstract page pdf is available here – refer to the sample page as you read through the format requirements for the abstract.
• Only one abstract is permitted.
• The heading “ Abstract ” is in all capital letters, centered one inch from the top of the page.
• Three blank lines (single-spaced) must be between the “ Abstract ” heading and your title.
• Your title must be in all capital letters and centered.
• The title must match the title on your Title Page and the GS30 – Thesis/Dissertation Submission Form
• Three blank lines (single-spaced) must be between the title and your text.
• The text of your abstract must be double-spaced.
• The first page of the abstract is numbered with a small Roman numeral ii.

Table of Contents

• A sample Table of Contents page pdf is available.
• The heading “ Table of Contents ” is in all capital letters centered one inch from the top of the page.
• Three blank lines (single-spaced) follow the heading.
• List all parts of the document (except the title page) and the page numbers on which each part begins.
• The titles of all parts are worded exactly as they appear in the document.
• Titles and headings and the page numbers on which they begin are separated by a row of dot leaders.
• Major headings are aligned flush with the left margin.
• Page numbers are aligned flush with the right margin.

The text of a thesis features an introduction and several chapters, sections and subsections. Text may also include parenthetical references, footnotes, or references to the bibliography or endnotes.

Any references to journal publications, authors, contributions, etc. on your chapter pages or major heading pages should be listed as a footnote .

• The entire document is 8.5” x 11” (letter) size.
• Pages may be in landscape position for figures and tables that do not fit in “portrait” position.
• Choose one type style (font) and font size and use it throughout the text of your thesis. Examples: Times New Roman and Arial.
• Font sizes should be between 10 point and 12 point.
• Font color must be black. 
• Hyperlinked text must be in blue. If you hyperlink more than one line of text, such as the entire table of contents, leave the text black. 
• Margins are one inch on all sides (top, bottom, left, and right).
• Always continue the text to the bottom margin except at the end of a chapter.

• Please see preliminary page requirements .
• Body and references are numbered with Arabic numerals beginning with the first page of text (numbered 1).
• Page numbers must be centered ½” from the bottom of the page.

Major Headings

• A sample page pdf for major headings and subheadings is available here.
• Use consistent style for major headings.
• Three blank lines (single-spaced) need to be between the major heading and your text.
• Each chapter is started on a new page.
• The References or Bibliography heading is a major heading and the formatting needs to match chapter headings.

Subheadings

• A sample page pdf for major headings and subheadings is available here .
• Style for subheadings is optional but the style should be consistent throughout.
• Subheadings within a chapter (or section) do not begin on a new page unless the preceding page is filled. Continue the text to the bottom of the page unless at the end of a chapter.
• Subheadings at the bottom of a page require two lines of text following the heading and at least two lines of text on the next page.

Running Head

Do not insert a running head.

When dividing paragraphs, at least two lines of text should appear at the bottom of the page and at least two lines of text on the next page.

Hyphenation

The last word on a page may not be divided. No more than three lines in succession may end with hyphens. Divide words as indicated in a standard dictionary.

• The text of the thesis is double-spaced.
• Bibliography or list of reference entries and data within large tables may be single-spaced. Footnotes should be single spaced.
• Footnotes and bibliography or list of reference entries are separated by double-spacing.
• Quoted material of more than three lines is indented and single-spaced. Quoted material that is three lines or fewer may be single-spaced for emphasis.

Poems should be double-spaced with triple-spacing between stanzas. Stanzas may be centered if lines are short.

• Consult a style manual approved by your department for samples of footnotes.
• Footnotes are numbered consecutively throughout the entire thesis.
• Footnotes appear at the bottom of the page on which the reference is made.
• Footnotes are single-spaced.
• Consult a style manual approved by your department for samples of endnotes.
• Endnotes are numbered consecutively throughout the entire thesis.
• Endnotes may be placed at the end of each chapter or following the last page of text.
• The form for an endnote is the same as a footnote. Type the heading “endnote”.

Tables and Figures

• Tables and figures should follow immediately after first mentioned in the text or on the next page.
• If they are placed on the next page, continue the text to the bottom of the preceding page.
• Do not wrap text around tables or figures. Text can go above and/or below.
• If more clarity is provided by placing tables and figures at the end of chapters or at the end of the text, this format is also acceptable.
• Tables and Figures are placed before references.
• Any diagram, drawing, graph, chart, map, photograph, or other type of illustration is presented in the thesis as a figure.
• All tables and figures must conform to margin requirements.
• Images can be resized to fit within margins
• Table captions go above tables.
• Figure captions go below figures.
• Captions must be single spaced.

Landscape Tables and Figures

• Large tables or figures can be placed on the page landscape or broadside orientation.
• Landscape tables and figures should face the right margin (unbound side).
• The top margin must be the same as on a regular page.
• Page numbers for landscape or broadside tables or figures are placed on the 11” side.

Supplementaries

These are the general requirements for all supplementary pages.

• Supplementary pages are arranged as listed under “Organizing and Formatting the Thesis/Dissertation” and numbered consecutively.
• Headings for all supplementary pages are major headings and the formatting style needs to match chapter headings.

References or Bibliography

• The References or Bibliography heading is always a major heading and the formatting style needs to match chapter headings.
• References or Bibliography are ordered after each chapter, or at the end of the text.
• References or Bibliography must start on a new page from the chapter text.
• References are aligned flush with the left margin.
• The style for references should follow the format appropriate for the field of study.
• The style used must be consistent throughout the thesis.
• Appendices are optional and used for supplementary material.
• The Appendices heading is a major heading and the formatting style needs to match chapter headings.
• As an option the appendix may be introduced with a cover page bearing only the title centered vertically and horizontally on the page. The content of the appendix then begins on the second page with the standard one inch top margin.
• Quality and format should be consistent with requirements for other parts of the thesis including margins.
• Page numbers used in the appendix must continue from the main text.

A Foreign Language Thesis

Occasionally, theses are written in languages other than English. In such cases, an English translation of the title and abstract must be included in the document.

• Submit one title page in the non-English language (no page number printed).
• Submit one title page in English (no page number printed).
• Submit one abstract in the non-English language (page number is ii).
• Submit one abstract in English (page number is numbered consecutively from previous page – example: if the last page of the abstract in the foreign language is page ii the first page of the abstract in English is numbered page iii).

Multipart Thesis

In some departments, a student may do research on two or more generally related areas which would be difficult to combine into a single well-organized thesis. The solution is the multi-part thesis.

• Each part is considered a separate unit, with its own chapters, bibliography or list of references, and appendix (optional); or it may have a combined bibliography or list of references and appendix.
• A single abstract is required.
• The pages of a multi-part thesis are numbered consecutively throughout the entire thesis, not through each part (therefore, the first page of Part II is not page 1).
• The chapter numbering begins with Chapter 1 for each part, or the chapters may be numbered consecutively.
• Pagination is consecutive throughout all parts, including numbered separation sheets between parts.
• Each part may be preceded by a separation sheet listing the appropriate number and title.

• Langson Library
• Science Library
• Grunigen Medical Library
• Law Library
• Connect From Off-Campus
• Accessibility
• Gateway Study Center

Email this link

Thesis / dissertation formatting manual (2024).

• Filing Fees and Student Status
• Submission Process Overview
• Electronic Thesis Submission
• Paper Thesis Submission
• Formatting Overview
• Fonts/Typeface
• Pagination, Margins, Spacing
• Paper Thesis Formatting
• Preliminary Pages Overview
• Copyright Page
• Dedication Page
• Table of Contents
• List of Figures (etc.)
• Acknowledgements
• Text and References Overview
• Figures and Illustrations
• Using Your Own Previously Published Materials
• Using Copyrighted Materials by Another Author
• Open Access and Embargoes
• Copyright and Creative Commons
• Ordering Print (Bound) Copies
• Tutorials and Assistance
• FAQ This link opens in a new window

Every page in your manuscript (except the Title and Copyright pages) must be numbered.

All page numbers should be centered at the bottom of each manuscript page.

See specific Pagination guidelines for the Preliminary Pages and the Text and Reference (Body) Pages .

Page Size and Margins

The final version of your thesis/dissertation must be on an  8.5" x 11" (letter size)  page.

All manuscript text, excluding manuscript page numbers, must fit within these specified margin requirements:

Minimum 1-inch margins  from the top, left, right, and bottom edges of each page

Tables, figures, graphs, photographs, and appendices are also included in these margin requirements. Materials may be reduced or enlarged, if necessary, to fit within the required margins. Pages may be rotated to landscape orientation to accommodate tables or illustrations .

Your manuscript must be  double-spaced,  with the exception of footnotes/endnotes, bibliographic entries, long quotations, data in lists and tables, lists in appendices and figure/table captions, all of which should be single-spaced.

• << Previous: Fonts/Typeface
• Next: Paper Thesis Formatting >>
• Last Updated: Feb 20, 2024 2:09 PM
• URL: https://guides.lib.uci.edu/gradmanual

Off-campus? Please use the Software VPN and choose the group UCIFull to access licensed content. For more information, please Click here

Software VPN is not available for guests, so they may not have access to some content when connecting from off-campus.

Formatting your Thesis and Dissertation:Tools,Tips and Troubleshooting

• I am a new Graduate Student at Florida Tech!
• Thesis and Dissertation Templates
• Learn About Zotero
• Formatting Landscape Pages
• Line Spacing
• Page Numbers
• Page Break and Section Breaks
• Table of Contents or Figures
• Figures Turning Black
• Margin issues with Tables
• Page numbers not appearing
• PDF to PDF/A
• Section Breaks
• Landscape Page Numbers
• Troubleshoot LaTeX formatting issues
• Copyright and Creative Commons Licenses Primer
• Do I need to embargo my thesis or dissertation?
• I'm ready to submit my electronic copy - now what do I do?
• What is the process for obtaining print copies of my thesis or dissertation?

Adjust Margins

On the  Page Layout  ribbon,  Page Setup  group, choose  Margins :

At  Margins , hold the cursor down on the arrow. When the Margins dialog box opens, move the cursor to the bottom to  Custom Margins  and click on it:

On the  Page Setup  dialog box, the margins should be 1.2 inches on the top, right and bottom and 1.7 inches on the left. Whole document ( Depending on department regulation ).

• << Previous: Troubleshoot Word formatting issues
• Next: Formatting Landscape Pages >>
• Last Updated: Apr 29, 2024 1:32 PM
• URL: https://libguides.lib.fit.edu/formattingyourthesisanddissertationtoolstipstroubleshooting

• Library Catalogue

Formatting your thesis: Overall layout and specifications

On this page

Formatting requirements, parts of a thesis, file format, file size, and page size, line spacing, citation style, cumulative theses, extended essays, personal information, blank pages.

The Library's Theses Office assists with formatting theses, projects and extended essays for submission to the Library. You are encouraged to use the Library's thesis template to help format your thesis. The requirements stated on this page are default settings for the thesis template

Optional pages in the thesis template may be removed if not used.

The final copy of the thesis must be converted to .pdf (PDF/A format) for submission to the Library (maximum 600 mb). See the guide  Saving your thesis in PDF/A format for instructions.

Theses must be formatted for US Letter (8.5X11) pages. Landscape 8.5X11 and 11X17 pages are permitted. Legal, A4, or other paper sizes are not permitted.

Arial is the preferred font for SFU thesis submissions. See the Thesis Template Instructions for directions to change the default template font.

Please contact the Theses Office at [email protected] if you would like to use any fonts in your thesis other than the ones recommended.

​The default template line spacing is 1.5 for text, with single-spaced block quotations.

Margins should be set to:

• 1.25" left/right
• 1" top/bottom

All pages must be numbered sequentially as outlined below, with the exception of the title page. Page numbers should appear at the bottom centre of each page, at a minimum of 0.5” from the edge of the page.

Preliminary pages of the thesis must be numbered with Roman numerals. On the first page of the main body, page numbers must restart with 1. The thesis template is preset with this numbering style.

SFU Library does not require a specific citation style. Consult your supervisor, your department’s graduate handbook, or a liaison librarian for help with determining which style is appropriate for your research.

The default formatting in the library’s thesis template may differ from some requirements of your citation style, but it is acceptable for SFU library submission.

Cumulative, or paper-based, theses must use the same general format as other submissions. Consult your supervisor or your department's graduate handbook for more information. If including published papers in a thesis, please consult the Copyright and your thesis FAQ .

Extended essays should be combined into a single document and single submission. For an example of an extended essays title page, see the Title page formatting information .

For theses written in a language other than English, the Library requires a second complete English title page and abstract. Supporting documentation must be in English.

Individual personal information must be removed from the thesis before publication, including signatures, email addresses, and phone numbers. For example, if you are including a survey instrument or consent form, your own contact information must be removed.

Blank pages in the thesis must be removed before publication.

Format Requirements for Your Dissertation or Thesis

Main navigation.

The final dissertation or thesis manuscript must have a ready-for-publication appearance and standard features.

The Office of the University Registrar does not endorse or verify the accuracy of any dissertation or thesis formatting templates that may be available to you.

It is your student responsibility to make sure that the formatting meets these requirements. Introductory material, text, and appendices must all be clearly and consistently prepared and must meet all of the specifications outlined below.

Once you upload and submit your dissertation or thesis in Axess, and it has been approved by the university, the submission is considered final and no further changes are permitted.

The digital file of the dissertation or thesis, which is sent to Stanford Libraries for cataloging, must meet certain technical requirements to ensure that it can be easily accessed by readers now and into the future. 

Follow the specifications outlined below.

Style and Format

Word and text divisions, style guides, content and layout, special instructions for d.m.a. students, order and content, page orientation, embedded links, supplementary material and publishing, supplementary material, scholarly reference, published papers and multiple authorship, use of copyrighted material, copyrighting your dissertation, file security and file name, stanford university thesis & dissertation publication license.

Pages should be standard U.S. letter size (8.5 x 11 inches).

In order to ensure the future ability to render the document, standard fonts must be used. 

For the main text body, type size should be 10, 11, or 12 point. Smaller font sizes may be used in tables, captions, etc. 

The font color must be black. 

Font Families

Acceptable font styles include:

• Times New Roman (preferred)
• Courier, Courier Bold, Courier Oblique, Courier Bold-Oblique;
• Helvetica, Helvetica Bold, Helvetica Oblique, Helvetica Bold-Oblique;
• Times, Times Bold, Times Italic, Times Bold-Italic;
• Computer Modern (or Computer Modern Roman).

Note: Do not use script or ornamental fonts. Do not use proprietary fonts.

If you use mathematical or other scientific notation in your dissertation or thesis using a font other than Symbol, you must embed the font into the PDF that is submitted to the university. 

Inner margins (left edge if single-sided; right edge for even-numbered pages, and left edge for odd-numbered pages if double-sided) must be 1.5 inches. All other margins must be one inch.

Pagination, headers, and/or footers may be placed within the margin, but no closer than one-half inch from the edge of the page.

For double-sided copies, 1.5 inches must be maintained as the inner margin. Margin requirements should apply to the entire document, including the title page.

The main body text of the manuscript should be one-and-a-half or double-spaced lines, except where conventional usage calls for single spacing, such as footnotes, indented quotations, tables, appendices, etc.

Words should be divided correctly at the end of a line and may not be divided from one page to the next. Use a standard dictionary to determine word division. 

Avoid short lines that end a paragraph at the top of a page, and any heading or subheading at the bottom of a page that is not followed by text.

The dissertation and thesis must be in English. 

Language Exceptions for Dissertations Only

Approval for writing the dissertation in another language is normally granted only in cases where the other language or literature in that language is also the subject of the discipline. 

Exceptions are granted by the school dean upon submission of a written request from the chair of your major department. Approval is routinely granted for dissertations in the Division of Literature, Cultures, and Languages within department specifications.

Prior to submitting in Axess, you must send a copy of the approval letter (or email message chain) from the department dean to [email protected]    

Dissertations written in another language must include an extended summary in English (usually 15 to 20 pages in length). In this case, you should upload your English summary as a supplemental file, during Step 4 of the online submission process.

Select a standard style approved by your department or dissertation advisor and use it consistently. 

Some reliable style guides are:

• K.A. Turabian’s A Manual for Writers of Term Papers, 
• Theses and Dissertations (University of Chicago Press), and 
• the MLA Handbook for Writers of Research Papers, Theses, and Dissertations (Modern Language Association).

If you are a student in the Doctor of Musical Arts program, you may submit musical scores formatted at 11 x 17 inches in size. 

If you are submitting a performance as your dissertation, submit the audio file in WAV format as a supplemental file. 

Note: The maximum file size accepted for submission is 100 MB. If a performance recording exceeds the maximum file size, break the file into multiple files and submit the parts individually as supplemental files.

Your dissertation or thesis must contain the following sections. All sections must be included in a single digital file for upload.

• Title Page — The format must be followed exactly. View these title page examples for Ph.D. Dissertation and this title page sample for an Engineer Thesis . Use uppercase letters. The title of the dissertation or thesis should be a meaningful description of the content of the manuscript. Use word substitutes for formulas, symbols, superscripts, subscripts, Greek letters, etc. The month and year must be the actual month and year in which you submit your dissertation or thesis electronically to the university. (Note: A student who submits in Autumn quarter is conferred his/her degree in the following calendar year.)
• Copyright Page — The dissertation or thesis PDF uploaded in Axess should not contain a copyright page. The copyright page will be created automatically by the online submission system and inserted into the file stored by Stanford Libraries.
• Signature Page — The dissertation or thesis PDF uploaded in Axess should also not contain a signature page. The submission process has moved away from ink-signatures, so a digital facsimile of the signature page will be created automatically by the online submission system and inserted into the dissertation or thesis in its final format stored by Stanford Libraries.
• Abstract — An abstract may be included in the preliminary section of the dissertation or thesis. The abstract in the body of the dissertation or thesis follows the style used for the rest of the manuscript and should be placed following the signature page. There is no maximum permissible length for the abstract in the dissertation or thesis.    Dissertation authors must enter an abstract using the online submission form for uploading the digital dissertation or thesis file to the library. This abstract, which will be indexed for online searching, must be formatted in plain text (no HTML or special formatting). It should be a pithy and succinct version of the abstract included in the dissertation or thesis itself.
• Preface, an Acknowledgment, or a Dedication
• Table of Contents – Include page references.
• List of Tables –  Include titles and page references. This list is optional.
• List of Illustrations – Include titles and page references. This list is optional
• Introduction  
• Main body – Include suitable, consistent headings for the larger divisions and more important sub-divisions.
• Appendices.
• Bibliography or List of References.

Except for the title page, which counts as 'i' but is not physically numbered, each page of the manuscript, including all blank pages, pages between chapters, pages with text, photographs, tables, figures, maps, or computer code must be assigned a number. 

Consistent placement of pagination, at least one-half inch from the paper’s edge, should be used throughout the manuscript.

Follow these pagination instructions exactly:

• For the preliminary pages, use small Roman numerals (e.g., iv, v, vi).
• The title page is not physically numbered, but counts as page i.
• Keep in mind that a copyright page ii and augmented signature page iii (based off your student record) will automatically be inserted to your manuscript during submission.  This means you must ensure to remove pages ii and iii from your dissertation or thesis.
• Failing to remove pages ii and iii is most common formatting mistake: you must remove your copyright page ii and signature page iii from the pdf file before you submit your dissertation or thesis, and begin pagination on your abstract with page number "iv". If the document is formatted for double-sided printing with each section starting on the right page, then pagination will begin on a blank page (page"iv") and the Abstract should be numbered as page "v", and so forth.
• For the remainder of the manuscript, starting with the Introduction or Chapter 1 of the Main Body, use continuous pagination (1, 2, 3, etc) for text, illustrations, images, appendices, and the bibliography. Remember to start with Arabic numbered page 1, as this is not a continuation of the Roman numeral numbering from the preliminary pages.
• The placement of page numbers should be consistent throughout the document.

For text, illustrations, charts, graphs, etc., printed in landscape form, the orientation should be facing away from the bound edge of the paper.

Images (color, grayscale, and monochrome) included in the dissertation or thesis should be clearly discernible both on screen and when printed. The dimensions should not exceed the size of the standard letter-size page (8.5” x 11”).

Image resolution should be 150 dots per inch (dpi), though resolutions as low as 72 dpi (and no lower) are acceptable. 

The format of images embedded in the PDF should be JPEG or EPS (the format JPEG2000 is also acceptable when it is supported in future versions of the PDF format). GIF and PNG are not preferred image file formats.

Large images, including maps and charts or other graphics that require high resolution, should not be included in the main dissertation or thesis file. Instead, they can be submitted separately as supplemental files and formatted in other formats as appropriate. 

Multimedia, such as audio, video, animation, etc., must not be embedded in the body of the dissertation or thesis. These media types add size and complexity to the digital file, introducing obstacles to users of the dissertation or thesis who wish to download and read (and “play back”) the content, and making it more difficult to preserve over time.

If you wish to include multimedia with your submission, upload the media separately as a stand-alone file in an appropriate media format. See Supplementary Material section below.

It is acceptable to include “live” (i.e., clickable) web URLs that link to online resources within the dissertation or thesis file. Spell out each URL in its entirety (e.g., http://www.stanford.edu ) rather than embedding the link in text (e.g., Stanford homepage ). By spelling out the URL, you improve a reader’s ability to understand and access the link reference.

Supplementary material may be submitted electronically with the dissertation or thesis. This material includes any supporting content that is useful for understanding the dissertation or thesis, but is not essential to the argument. It also covers core content in a form that can not be adequately represented or embedded in the PDF format, such as an audio recording of a musical performance.

Supplementary materials are submitted separately than the dissertation or thesis file, and are referred to as supplemental files.

A maximum of twenty supplemental files can be submitted. There are no restrictions on the file formats. The maximum file size is 1 GB.

You are encouraged to be judicious about the volume and quality of the supplemental files, and to employ file formats that are widely used by researchers generally, if not also by scholars of the discipline.

The following table outlines recommended file formats for different content types. By following these recommendations, the author is helping to ensure ongoing access to the material.

After uploading each supplemental file, it is important to enter a short description or label (maximum 120 characters for file name and the description). This label will be displayed to readers in a list of the contents for the entire submission.

If copyrighted material is part of the supplementary material, permission to reuse and distribute the content must be obtained from the owner of the copyright. Stanford Libraries requires copies of permission letters (in PDF format) to be uploaded electronically when submitting the files, and assumes no liability for copyright violations. View this sample permission letter .

System restrictions allow for a maximum of 10 individually uploaded permission files. If you have more than 10 permission files we recommend combining all permission letters into a single PDF file for upload.

In choosing an annotation or reference system, you should be guided by the practice of your discipline and the recommendations of your departments. In addition to the general style guides listed in the Style section above, there are specific style guides for some fields. When a reference system has been selected, it should be used consistently throughout the dissertation or thesis. The placement of footnotes is at your discretion with reading committee approval.

An important aspect of modern scholarship is the proper attribution of authorship for joint or group research. If the manuscript includes joint or group research, you must clearly identify your contribution to the enterprise in an introduction.

The inclusion of published papers in a dissertation or thesis is the prerogative of the major department. Where published papers or ready-for-publication papers are included, the following criteria must be met:

• There must be an introduction that integrates the general theme of the research and the relationship between the chapters. The introduction may also include a review of the literature relevant to the dissertation or thesis topic that does not appear in the chapters.
• Multiple authorship of a published paper should be addressed by clearly designating, in an introduction, the role that the dissertation or thesis author had in the research and production of the published paper. The student must have a major contribution to the research and writing of papers included in the dissertation or thesis.
• There must be adequate referencing of where individual papers have been published.
• Written permission must be obtained for all copyrighted materials. Letters of permission must be uploaded electronically in PDF form when submitting the dissertation or thesis. 
• The published material must be reformatted to meet the university's format requirements (e.g., appropriate margins and pagination) of the dissertation. The Office of the University Registrar will approve a dissertation or thesis if there are no deviations from the normal specifications that would prevent proper dissemination and utilization of the dissertation or thesis. If the published material does not correspond to these standards, it will be necessary for you to reformat that portion of the dissertation or thesis.
• Multiple authorship has implications with respect to copyright and public release of the material. Be sure to discuss copyright clearance and embargo options with your co-authors and your advisor well in advance of preparing your thesis for submission.

If copyrighted material belonging to others is used in your dissertation or thesis or is part of your supplementary materials, you must give full credit to the author and publisher of the work in all cases, and obtain permission from the copyright owner for reuse of the material unless you have determined that your use of the work is clearly fair use under US copyright law (17 USC §107). 

The statute sets out four factors that must be considered when assessing Fair Use:

• the purpose and character of the use, including whether such use is of a commercial nature or is for nonprofit educational purpose;
• the nature of the copyrighted work;
• the amount and substantiality of the portion used in relation to the copyrighted work as a whole; and
• the effect of the use upon the potential market for or value of the copyrighted work.

The Association of American University Presses requires permission for any quotations that are reproduced as complete units (poems, letters, short stories, essays, journal articles, complete chapters or sections of books, maps, charts, graphs, tables, drawings, or other illustrative materials). You can find this guideline and other detailed information on Fair Use at http://fairuse.stanford.edu . 

If you are in doubt, it is safest to obtain permission. Permission to use copyrighted material must be obtained from the owner of the copyright. Stanford Libraries requires copies of permission letters (in PDF format) to be uploaded electronically when submitting the dissertation or thesis, and assumes no liability for copyright violations. For reference, view this sample permission letter .

Copyright protection is automatically in effect from the time the work is in fixed form. A proper copyright statement consisting of the copyright symbol, the author’s name, year of degree conferral, and the phrase “All Rights Reserved” will be added automatically to the dissertation or thesis in its final form.

Registration of copyright is not required, but it establishes a public record of your copyright claim and enables copyright owners to litigate against infringement. You need not register your copyright with the U.S. Copyright Office at the outset, although registration must be made before the copyright may be enforced by litigation in case of infringement. 

Early registration does have certain advantages: it establishes a public record of your copyright claim, and if registration has been made prior to the infringement of your work, or within three months after its publication, qualifies you to be awarded statutory damages and attorney fees in addition to the actual damages and profits available to you as the copyright owner (should you ever have to sue because of infringement).

For more information about copyright, see the Stanford Libraries' resource on Copyright Considerations .

For further information on Registration of Copyright, see https://www.copyright.gov/registration/ .

Do not require a password to make changes to your submitted PDF file, or apply other encryption or security measures. Password-protected files will be rejected.

The file name and description will be printed on a page added to your dissertation or thesis, so choose a file name accordingly.

Important note: File names may only consist of alphanumeric characters, hyphen, underscore, at sign, space, ampersand, and comma – before the ending period and file extension.  Specifically,

• A file name cannot start with a space, period (nor contain a period), underscore, or hyphen.
• Files names must be 120 characters or less.

Here is an example of a filename that is allowed, including all of the possible characters:

• A Study of Social Media with a Focus on @Twitter Accounts, Leland Student_30AUG2023.pdf

In submitting a thesis or dissertation to Stanford, the author grants The Trustees of Leland Stanford Junior University (Stanford) the non-exclusive, worldwide, perpetual, irrevocable right to reproduce, distribute, display and transmit author's thesis or dissertation, including any supplemental materials (the Work), in whole or in part in such print and electronic formats as may be in existence now or developed in the future, to sub-license others to do the same, and to preserve and protect the Work, subject to any third-party release or display restrictions specified by Author on submission of the Work to Stanford.

Author further represents and warrants that Author is the copyright holder of the Work, and has obtained all necessary rights to permit Stanford to reproduce and distribute third-party materials contained in any part of the Work, including use of third-party images, text, or music, as well as all necessary licenses relating to any non-public, third-party software necessary to access, display, and run or print the Work. Author is solely responsible and will indemnify Stanford for any third party claims related to the Work as submitted for publication.

Author warrants that the Work does not contain information protected by the Health Insurance Portability and Accountability Act (HIPAA), the Family Educational Rights and Privacy Act (FERPA), confidentiality agreements, or contain Stanford Prohibited, Restricted or Confidential data described on the University IT website , or other data of a private nature.

Stanford is under no obligation to use, display or host the work in any way and may elect not to use the work for any reason including copyright or other legal concerns, financial resources, or programmatic need.

Formatting Theses & Dissertations using Word 2010: Setting Margins

• Footnotes and Endnotes
• Images, Charts, Other Objects
• Cross-References
• Applying a Style
• Modifying a Style
• Setting up a Heading 1 Example

Setting Margins

• Creating and Using Templates
• Combining Chapters
• Finalizing Without Styles
• Adding Page Numbers
• Landscape Pages
• Automatic Table of Contents and Lists
• Commenting and Reviewing
• Quick Links

General guidelines require a 1” margin on  all sides except the left, which requires a 1.5” margin.

• On the Page Layout Ribbon, in the Page Setup Group , click on the arrow below the Margins options and select Custom Margins….
• In the Page Setup dialog box, select the Margins tab, and type 1.5” into the space for the left margin and 1’ for the rest of them.
• Before closing the dialog box, make sure the Apply to: setting is set to Whole Document .

Even though general guidelines say you need a 2 or 2.5 inch margin on the top of certain pages, do not use the margins to achieve this – see below for more details.

If for whatever reason you need to change the margin for only one section, be sure the Apply to: is set to This section only . 

Two-inch Margin Using Styles

Using a Heading 1 and redefining the style create the two-inch margin required by general guidelines on the chapter titles and major headings like Dedication and Acknowledgments is often the best method.

By adding the extra space above the Heading 1, you combine the one inch margin from the document with the one inch of space on the heading to create your two inches.

Please see the Setting Up Heading 1 Example on the previous page for the step-by-step instructions.

• << Previous: Setting up a Heading 1 Example
• Next: Numbering >>
• Last Updated: Dec 16, 2021 3:21 PM
• URL: https://research.auctr.edu/dissertation

Format, bind and submit your thesis: general guidance

You no longer need to submit a physical copy of your thesis. Please refer directly to the “Submit Your Thesis” section below.

This information is for research students submitting a thesis for assessment. It tells you how to:

• format your thesis
• submit your thesis
• bind your thesis 
• submit the final copy of your thesis

There are different requirements for students of fine arts, design, architecture or town planning.

Find out more about these requirements

Format your thesis

UCL theses should be submitted in a specific format, this applies to both the viva and final copies of your thesis. 

View the thesis checklist

Presentation

In the electronic version of your thesis, hyperlinks (including DOIs) should be functional and resolve to the correct webpage.

We would recommend using Arial or Helvetica fonts, at a size of no less than 12.

Find out more about the accessibility guidelines

If printed, please present your thesis in a permanent and legible format.

Illustrations should be permanently mounted on A4 size paper and bound in with the thesis; you may not use sellotape or similar materials.

A4 size paper (210 x 297 mm) should be used. Plain white paper must be used, of good quality and of sufficient opacity for normal reading. Both sides of the paper may be used.

Both sides of the paper may be used.

Margins at the binding edge must not be less than 40 mm (1.5 inches) and other margins not less than 20 mm (.75 inches). Double or one-and-a-half spacing should be used in typescripts, except for indented quotations or footnotes where single spacing may be used.

All pages must be numbered in one continuous sequence, i.e. from the title page of the first volume to the last page of type, in Arabic numerals from 1 onwards. This sequence must include everything bound in the volume, including maps, diagrams, blank pages, etc. Any material which cannot be bound in with the text must be placed in a pocket inside or attached to the back cover or in a rigid container similar in format to the bound thesis (see Illustrative material ).

The title page must bear the following:

• the officially-approved title of the thesis
• the candidates full name as registered
• the institution name 'UCL'
• the degree for which the thesis is submitted

The title page should be followed by a signed declaration that the work presented in the thesis is the candidate’s own e.g.

‘I, [full name] confirm that the work presented in this thesis is my own. Where information has been derived from other sources, I confirm that this has been indicated in the thesis.'

Please see the section below entitled ‘Inclusion of published works in doctoral theses’ for more information about how to indicate when you have re-used material that you have previously published.

The signed declaration should be followed by an abstract consisting of no more than 300 words.

Impact Statement

The abstract should be followed by an impact statement consisting of no more than 500 words. For further information on the content of the Impact Statement, please see the Impact Statement Guidance Notes for Research Students and Supervisors on the Doctoral School's website. 

Find out more about the Impact Statement

Inclusion of published works in doctoral theses

If you have included any work in your thesis that you have published (e.g. in a journal) previously, then you will need to insert a completed copy of the UCL Research Paper Declaration Form into your thesis after the Impact Statement. The form, and information about how to complete it is available on the Doctoral School’s website.

Find out more about the UCL Research Paper Declaration Form

Table of contents

In each copy of the thesis the abstract should be followed by a full table of contents (including any material not bound in) and a list of tables, photographs and any other materials. It is good practice to use bookmarking within the PDF of the thesis in electronic form to allow readers to jump to the relevant section, figure, table etc. from the table of contents.

Illustrative material

Illustrative material may be submitted on a CD-ROM. If you wish to submit material in any other form, your supervisor must contact Research Degrees well in advance of submission of the thesis.

Any material which cannot be bound in with the text must be placed either in a pocket inside or attached to the back cover or in a rigid container similar in format to the bound thesis. If it is separate from the bound volume it must be clearly labelled with the same information as on the title page. Each copy of the thesis submitted must be accompanied by a full set of this material.

Submit your thesis

Viva copies.

You must submit an electronic version of your thesis to via the UCL OneDrive . You no longer need to submit a printed copy unless your examiners ask for this. 

Find out more on how to submit via the UCL OneDrive

We will check your status and if your examiners have been appointed we will forward the thesis directly to them. They will then be able to download the copy of your thesis to prepare for your exam. 

If an external examiner requests a hard copy of the thesis you will need to arrange for this to be printed and submitted to the Student Enquiries Centre during their walk-in operational hours. We will collect your thesis and post it on to the examiners. 

If your examiners have not been appointed, your thesis will be held securely until your examiners have been formally appointed by UCL.

Covid-19 Impact Form

We have developed a form for you to submit with your thesis if you wish to declare an impact on your research.   The form is optional and your choice to complete it or not will have no bearing on the outcome of your examination. It is intended to set the context of examination and is not a plea for leniency. Your examiners will continue to apply the standard criteria as set out in UCL’s Academic Manual and the joint examiners’ form. Please see the publication from the QAA on Advice on Doctoral Standards for Research Students and Supervisors for further support.

You must submit this form as a separate Word document or PDF when you submit your thesis via the UCL Dropbox as detailed in our guidance above.   We will only accept the form if you submit it at the same time that you submit your thesis.  This will apply if you are making an initial submission or a resubmission.

Download the Covid-19 Impact Form

Find out more about the Student Enquiries Centre

Your examination entry form must be received and logged by Research Degrees before you submit your thesis.

Find out more about examination entry

Re-submission

If you need to re-submit you must:

• submit a new examination entry form to the Research Degrees office at least 4 weeks prior to the expected submission of the thesis
• you must submit an electronic version of your thesis to via the UCL OneDrive . You no longer need to submit a printed copy unless your examiners ask for this.  Find out more on how to submit via the UCL OneDrive

We will check your status and confirm that your examiners are willing to review your revised thesis. We will then forward the thesis directly to them. They will be able to download the copy of your thesis for assessment. 

If an external examiner requests a hard copy of the thesis you will need to arrange for this to be printed and submitted to the Student Enquiries Centre during their walk-in operational hours. We will collect your thesis and post it on to the examiners.

Submitting as a Non-Registered Student

If you do not submit your thesis by the end of your period of Completing Research Status, your registration as a student will end at that point. Your supervisor will then need to apply for permission for you to submit your thesis in writing to the Research Degrees section, at least 3 weeks before your expected submission date. You will be charged a submission extension fee at the point you submit your thesis.

Bind your thesis

If your examiners have request a printed copy of your thesis, please read the following guidance:

Theses have to be robust enough to withstand the examination process and be easily identified. They will need to have your name on the spine to distinguish them.

All theses (whether soft or hard-bound) must:

• be covered in medium blue cloth (e.g. water resistant material) 
• be lettered in gold up the spine with degree, year, name and initials in the same form as UCL records, with letters 16 or 18 point (.25 inch) - thesis submitted for examination in November and December should have the following year lettered on the spine
• have no lettering on front cover of thesis
• have the spine text inverted if the front cover is facing up

An example of how your thesis should be presented.

Hard-bound theses must have the pages sown in (not punched) and soft-bound theses should have the pages glued in. Theses submitted in any other form of binding, including ring binding, will not be accepted.

You are responsible for making sure that your thesis is correctly bound by the company you select.

Final copies

UCL no longer requires a printed copy of your final thesis and we will award your degree once you have met the academic conditions and the Library have confirmed receipt of your e-thesis, the Deposit Agreement form, and you have cleared any outstanding fees.

You will need to deposit an electronic copy of your final thesis (and a completed E-Thesis Deposit Agreement form) via UCL's Research Publications Service (RPS). Please ensure that you remove, or blank out, all personal identifiers such as signatures, addresses and telephone numbers from the e-thesis. Any photographs that you have taken should not show identifiable individuals without their permission and any you have taken of children should mask their faces.

If you do wish to deposit a hard copy you can do so by sending it directly to the Cataloguing & Metadata department of Library Services by post, or in person at the Main Library help desk.  You will find more information about the process on the existing webpage for e-thesis submission. 

Find out more about depositing an electronic and printed copy of your thesis

Related content

• Research degrees: examination entry
• Format, bind and submit your thesis: fine art, design, architecture and town planning
• Viva examinations: guidance

Important Information:

The UCL Student Centre has now moved.  Details of their new location can be found here.  

/images/cornell/logo35pt_cornell_white.svg" alt="thesis page margin"> Cornell University --> Graduate School

Required sections, guidelines, and suggestions.

Beyond those noted on the Formatting Requirements page , the Graduate School has no additional formatting requirements. The following suggestions are based on best practices and historic requirements for dissertations and theses but are not requirements for submission of the thesis or dissertation. The Graduate School recommends that each dissertation or thesis conform to the standards of leading academic journals in your field.

For both master’s and doctoral students, the same basic rules apply; however, differences exist in some limited areas, particularly in producing the abstract and filing the dissertation or thesis.

• Information in this guide that pertains specifically to doctoral candidates and dissertations is clearly marked with the term “ dissertation ” or “ doctoral candidates .”
• Information pertaining specifically to master’s candidates and theses is clearly marked with the term “ thesis ” or “ master’s candidates .”
• All other information pertains to both.

Examples of formatting suggestions for both the dissertation and thesis are available as downloadable templates .

Required? Yes.

Suggested numbering: Page included in overall document, but number not typed on page.

The following format for your title page is suggested, but not required.

• The title should be written using all capital letters, centered within the left and right margins, and spaced about 1.5 inches from the top of the page. (For an example, please see the template .)
• Carefully select words for the title of the dissertation or thesis to represent the subject content as accurately as possible. Words in the title are important access points to researchers who may use keyword searches to identify works in various subject areas.
• Use word substitutes for formulas, symbols, superscripts, Greek letters, etc.
• Below the title, at the vertical and horizontal center of the margins, place the following five lines (all centered):

Line 1: A Dissertation [or Thesis]

Line 2: Presented to the Faculty of the Graduate School

Line 3: of Cornell University

Line 4: in Partial Fulfillment of the Requirements for the Degree of

Line 5: Doctor of Philosophy [or other appropriate degree]

• Center the following three lines within the margins:

Line 2: Primary or Preferred Name [as registered with the University Registrar’s Office and displayed in Student Center]

Line 3: month and year of degree conferral [May, August, December; no comma between month and year]

Copyright Page

Suggested numbering: Page included in overall document, but number not typed on page

The following format for your copyright page is suggested, but not required.

• A notice of copyright should appear as the sole item on the page centered vertically and horizontally within the margins: © 20__ [Primary or Preferred Name [as registered with the University Registrar’s Office]. Please note that there is not usually a page heading on the copyright page.
• The copyright symbol is a lowercase “c,” which must be circled. (On Macs, the symbol is typed by pressing the “option” and “g” keys simultaneously. If the font does not have the © symbol, type the “c” and circle it by hand. On PCs, in the insert menu, choose “symbol,” and select the © symbol.)
• The date, which follows the copyright symbol, is the year of conferral of your degree.
• Your name follows the date.

Required?  Yes.

Suggested numbering: Page(s) not counted, not numbered

Abstract formats for the doctoral dissertation and master’s thesis differ greatly. The Graduate School recommends that you conform to the standards of leading academic journals in your field.

Doctoral candidates:

• TITLE OF DISSERTATION
• Student’s Primary or Preferred Name, Ph.D. [as registered with the University Registrar’s Office]
• Cornell University 20__ [year of conferral]
• Following the heading lines, begin the text of the abstract on the same page.
• The abstract states the problem, describes the methods and procedures used, and gives the main results or conclusions of the research.
• The abstract usually does not exceed 350 words in length (about one-and-one-half correctly spaced pages—but not more than two pages).

Master’s candidate:

• In a thesis, the page heading is simply the word “ABSTRACT” in all capital letters and centered within the margins at the top of the page. (The thesis abstract does not display the thesis title, author’s name, degree, university, or date of degree conferral.)
• The abstract should state the problem, describe the methods and procedures used, and give the main results or conclusions.
• The abstract usually does not exceed 600 words in length, which is approximately two-and-one-half to three pages of correctly spaced typing.
• In M.F.A. theses, an abstract is not required.

Biographical Sketch

Suggested numbering: iii (may be more than one page)

• Type number(s) on page(s).

The following content and format are suggested:

• The biographical sketch is written in third-person voice and contains your educational background. Sometimes additional biographical facts are included.
• As a page heading, use “BIOGRAPHICAL SKETCH” in all capital letters, centered on the page.
• Number this page as iii.

Required? Optional.

Suggested numbering: iv (may be more than one page)

The dedication page is not required and can contain whatever text that you would like to include. Text on this page does not need to be in English.

Acknowledgements

Suggested numbering: v (may be more than one page)

The following content and format are suggested, not required.

• The acknowledgements may be written in first-person voice. If your research has been funded by outside grants, you should check with the principal investigator of the grant regarding proper acknowledgement of the funding source. Most outside funding sources require some statement of acknowledgement of the support; some also require a disclaimer from responsibility for the results.
• As a page heading, use “ACKNOWLEDGEMENTS” in all capital letters, centered on the page.

Table of Contents

Suggested numbering: vi (may be more than one page)

The following are suggestions.

• As a page heading, use “TABLE OF CONTENTS” in all capital letters and centered on the page.
• List the sections/chapters of the body of the dissertation or thesis. Also, list preliminary sections starting with the biographical sketch. (Title page, copyright page, and abstract are not listed.)
• For theses and dissertations, the conventional format for page numbers is in a column to the right of each section/chapter title. The first page of each chapter/section is stated with a single number. Table of contents usually do not include a range of page numbers, such as 7-22.
• The table of contents is often single-spaced.

Two-Volume Theses or Dissertations

If the dissertation or thesis consists of two volumes, it is recommended, but not required, that you list “Volume II” as a section in the table of contents.

List of Figures, Illustrations, and Tables

Suggested numbering: vii (may be more than one page)

• If included, type number(s) on page(s).

As described in the formatting requirements above, figures and tables should be consecutively numbered. The Graduate School recommends that you conform to the styles set by the leading academic journals in your field. The items below are formatting suggestions based on best practices or historic precedents.

Table of contents format:

• As a page heading, use “LIST OF FIGURES,” “LIST OF ILLUSTRATIONS,” or “LIST OF TABLES” in all capital letters, centered on the page.
• There should be separate pages for “LIST OF FIGURES,” “LIST OF ILLUSTRATIONS,” or “LIST OF TABLES” even if there is only one example of each.
• The list should contain enough of the titles or descriptions so readers can locate items using the list. (It may not be necessary to include entire figure/illustration/table captions.)
• The list should contain the page number on which each figure, illustration, or table is found, as in a table of contents.
• The list of figures/illustrations/tables may be single-spaced.

Page format:

• Figures/illustrations/tables should be placed as close as possible to their first mention in the text. They may be placed on a page with no text above or below, or placed directly into the text. If a figure/illustration/table is placed directly into the text, text may appear above or below the figure/illustration/table; no text may wrap around the figure/illustration/table.
• If a figure/illustration/table appears on a page without other text, it should be centered vertically within the page margins. Figures/illustrations/tables should not be placed at the end of the chapter or at the end of the dissertation or thesis.
• Figure/illustration/table numbering should be either continuous throughout the dissertation or thesis, or by chapter (e.g. 1.1, 1.2; 2.1, 2.2, etc.). The word “Figure,” “Illustration,” or “Table” must be spelled out (not abbreviated), and the first letter must be capitalized.
• A caption for a figure/illustration should be placed at the bottom of the figure/illustration. However, a caption for a table must be placed above the table.
• If the figure/illustration/table, not including the caption, takes up the entire page, the figure/illustration/table caption should be placed alone on the preceding page and centered vertically and horizontally within the margins. (When the caption is on a separate page, the List of Figures or List of Illustrations or List of Tables can list the page number containing the caption.)
• If the figure/illustration/table, not including the caption, takes up more than two pages, it should be preceded by a page consisting of the caption only. The first page of the figure/illustration/table must include the figure/illustration/table (no caption), and the second and subsequent pages must also include, at the top of the figure/illustration/table, words that indicate its continuance—for example, “Figure 5 (Continued)”—and on these pages the caption is omitted.
• If figures/illustrations/tables are too large, they may be reduced slightly so as to render a satisfactory product or they must either be split into several pages or be redone. If a figure/illustration/table is reduced, all lettering must be clear, readable, and large enough to be legible. All lettering, including subscripts, must still be readable when reduced 25% beyond the final version. All page margin requirements must be maintained. Page numbers and headings must not be reduced.
• While there are no specific rules for the typographic format of figure/illustration/table captions, a consistent format should be used throughout the dissertation or thesis.
• The caption of a figure/illustration/table should be single-spaced, but then captions for all figures/illustrations/tables must be single-spaced.
• Horizontal figures/illustrations/tables should be positioned correctly—i.e., the top of the figure/illustration/table will be at the left margin of the vertical page of the dissertation or thesis (remember: pages are bound on the left margin). Figure/illustration/table headings/captions are placed with the same orientation as the figure/illustration/table when they are on the same page as the figure/illustration/table. When they are on a separate page, headings and captions are always placed in vertical orientation, regardless of the orientation of the figure/illustration/table. Page numbers are always placed as if the figure/illustration/table was vertical on the page.

Photographs should be treated as illustrations. To be considered archival, photographs must be black-and-white. (If actual color photographs are necessary, they should be accompanied by black-and-white photographs of the same subject.) Color photos obtained digitally do not need to be accompanied by a black-and-white photograph. Make a high-resolution digital version of each photograph and insert it into your electronic document, following the guideline suggestions for positioning and margins.

Optional Elements

List of abbreviations.

As a page heading, use “LIST OF ABBREVIATIONS” in all capital letters, centered on the page.

List of Symbols

As a page heading, use “LIST OF SYMBOLS” in all capital letters, centered on the page.

Suggested numbering: xi (may be more than one page)

As a page heading, use “PREFACE” in all capital letters, centered on the page.

Body of the Dissertation or Thesis: Text

Suggested numbering: Begin page number at 1

• Text (required)
• Appendix/Appendices (optional)
• Bibliography, References, or Works Cited (required)

Please note that smaller font size may be appropriate for footnotes or other material outside of the main text. The following suggestions are based on best practice or historic precedent, but are not required.

• Chapter headings may be included that conform to the standard of your academic field.
• Textual notes that provide supplementary information, opinions, explanations, or suggestions that are not part of the text must appear at the bottom of the page as footnotes. Lengthy footnotes may be continued on the next page. Placement of footnotes at the bottom of the page ensures they will appear as close as possible to the referenced passage.

Appendix (or Appendices)

An appendix (-ces) is not required for your thesis or dissertation. If you choose to include one, the following suggestions are based on best practice or historic precedent.

• As a page heading, use “APPENDIX” in all capital letters, centered on the page.
• Place in an appendix any material that is peripheral, but relevant, to the main text of the dissertation or thesis. Examples could include survey instruments, additional data, computer printouts, details of a procedure or analysis, a relevant paper that you wrote, etc.
• The appendix may include text that does not meet the general font and spacing requirements of the other sections of the dissertation or thesis.

Bibliography (or References or Works Cited)

A bibliography, references, or works cited is required for your thesis or dissertation. Please conform to the standards of leading academic journals in your field.

• As a page heading, use “BIBLIOGRAPHY” (or “REFERENCES” or “WORKS CITED”) in all capital letters, centered on the page. The bibliography should always begin on a new page.
• Bibliographies may be single-spaced within each entry but should include 24 points of space between entries.

Suggested numbering: Continue page numbering from body

If you choose to include a glossary, best practices and historic precedent suggest using a page heading, use “GLOSSARY” in all capital letters, centered on the page.

Suggested numbering: Continue page numbering from glossary

If you choose to include one, best practices and historic precedent suggest using a page heading, use “INDEX” in all capital letters, centered on the page.

Font Samples

Sample macintosh fonts.

• Palatino 12
• Garamond 14
• New Century School Book
• Helvetica 12 or Helvetica 14
• Times New Roman 12
• Times 14 (Times 12 is not acceptable)
• Symbol 12 is acceptable for symbols

Sample TeX and LaTeX Fonts

• CMR 12 font
• Any font that meets the above specifications

Sample PC Fonts

• Helvetica 12

• Privacy Policy

Home » Thesis Format – Templates and Samples

Thesis Format – Templates and Samples

Table of contents.

Thesis Format

Thesis format refers to the structure and layout of a research thesis or dissertation. It typically includes several chapters, each of which focuses on a particular aspect of the research topic .

The exact format of a thesis can vary depending on the academic discipline and the institution, but some common elements include:

Introduction

Literature review, methodology.

The title page is the first page of a thesis that provides essential information about the document, such as the title, author’s name, degree program, university, and the date of submission. It is considered as an important component of a thesis as it gives the reader an initial impression of the document’s content and quality.

The typical contents of a title page in a thesis include:

• The title of the thesis: It should be concise, informative, and accurately represent the main topic of the research.
• Author’s name: This should be written in full and should be the same as it appears on official university records.
• Degree program and department: This should specify the type of degree (e.g., Bachelor’s, Master’s, or Doctoral) and the field of study (e.g., Computer Science, Psychology, etc.).
• University: The name of the university where the thesis is being submitted.
• Date of submission : The month and year of submission of the thesis.
• Other details that can be included on the title page include the name of the advisor, the name of the committee members, and any acknowledgments.

In terms of formatting, the title page should be centered horizontally and vertically on the page, with a consistent font size and style. The page margin for the title page should be at least 1 inch (2.54 cm) on all sides. Additionally, it is common practice to include the university logo or crest on the title page, and this should be placed appropriately.

Title of the Thesis in Title Case by Author’s Full Name in Title Case

A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science in Department Name at the University Name

Month Year of Submission

An abstract is a brief summary of a thesis or research paper that provides an overview of the main points, methodology, and findings of the study. It is typically placed at the beginning of the document, after the title page and before the introduction.

The purpose of an abstract is to provide readers with a quick and concise overview of the research paper or thesis. It should be written in a clear and concise language, and should not contain any jargon or technical terms that are not easily understood by the general public.

Here’s an example of an abstract for a thesis:

Title: The Impact of Social Media on Mental Health among Adolescents

This study examines the impact of social media on mental health among adolescents. The research utilized a survey methodology and collected data from a sample of 500 adolescents aged between 13 and 18 years. The findings reveal that social media has a significant impact on mental health among adolescents, with frequent use of social media associated with higher levels of anxiety, depression, and low self-esteem. The study concludes that there is a need for increased awareness and education on the risks associated with excessive use of social media, and recommends strategies for promoting healthy social media habits among adolescents.

In this example, the abstract provides a concise summary of the thesis by highlighting the main points, methodology, and findings of the study. It also provides a clear indication of the significance of the study and its implications for future research and practice.

A table of contents is an essential part of a thesis as it provides the reader with an overview of the entire document’s structure and organization.

Here’s an example of how a table of contents might look in a thesis:

TABLE OF CONTENTS

I. INTRODUCTION ……………………………………………………..1

A. Background of the Study………………………………………..1

B. Statement of the Problem……………………………………….2

C. Objectives of the Study………………………………………..3

D. Research Questions…………………………………………….4

E. Significance of the Study………………………………………5

F. Scope and Limitations………………………………………….6

G. Definition of Terms……………………………………………7

II. LITERATURE REVIEW. ………………………………………………8

A. Overview of the Literature……………………………………..8

B. Key Themes and Concepts………………………………………..9

C. Gaps in the Literature………………………………………..10

D. Theoretical Framework………………………………………….11

III. METHODOLOGY ……………………………………………………12

A. Research Design………………………………………………12

B. Participants and Sampling……………………………………..13

C. Data Collection Procedures…………………………………….14

D. Data Analysis Procedures………………………………………15

IV. RESULTS …………………………………………………………16

A. Descriptive Statistics…………………………………………16

B. Inferential Statistics…………………………………………17

V. DISCUSSION ………………………………………………………18

A. Interpretation of Results………………………………………18

B. Discussion of Finding s …………………………………………19

C. Implications of the Study………………………………………20

VI. CONCLUSION ………………………………………………………21

A. Summary of the Study…………………………………………..21

B. Limitations of the Study……………………………………….22

C. Recommendations for Future Research……………………………..23

REFERENCES …………………………………………………………….24

APPENDICES …………………………………………………………….26

As you can see, the table of contents is organized by chapters and sections. Each chapter and section is listed with its corresponding page number, making it easy for the reader to navigate the thesis.

The introduction is a critical part of a thesis as it provides an overview of the research problem, sets the context for the study, and outlines the research objectives and questions. The introduction is typically the first chapter of a thesis and serves as a roadmap for the reader.

Here’s an example of how an introduction in a thesis might look:

Introduction:

The prevalence of obesity has increased rapidly in recent decades, with more than one-third of adults in the United States being classified as obese. Obesity is associated with numerous adverse health outcomes, including cardiovascular disease, diabetes, and certain cancers. Despite significant efforts to address this issue, the rates of obesity continue to rise. The purpose of this study is to investigate the relationship between lifestyle behaviors and obesity in young adults.

The study will be conducted using a mixed-methods approach, with both qualitative and quantitative data collection methods. The research objectives are to:

• Examine the relationship between lifestyle behaviors and obesity in young adults.
• Identify the key lifestyle factors that contribute to obesity in young adults.
• Evaluate the effectiveness of current interventions aimed at preventing and reducing obesity in young adults.

The research questions that will guide this study are:

• What is the relationship between lifestyle behaviors and obesity in young adults?
• Which lifestyle factors are most strongly associated with obesity in young adults?
• How effective are current interventions aimed at preventing and reducing obesity in young adults?

By addressing these research questions, this study aims to contribute to the understanding of the factors that contribute to obesity in young adults and to inform the development of effective interventions to prevent and reduce obesity in this population.

A literature review is a critical analysis and evaluation of existing literature on a specific topic or research question. It is an essential part of any thesis, as it provides a comprehensive overview of the existing research on the topic and helps to establish the theoretical framework for the study. The literature review allows the researcher to identify gaps in the current research, highlight areas that need further exploration, and demonstrate the importance of their research question.

April 9, 2023:

A search on Google Scholar for “Effectiveness of Online Learning during the COVID-19 Pandemic” yielded 1,540 results. Upon reviewing the first few pages of results, it is evident that there is a significant amount of literature on the topic. A majority of the studies focus on the experiences and perspectives of students and educators during the transition to online learning due to the pandemic.

One recent study published in the Journal of Educational Technology & Society (Liu et al., 2023) found that students who were already familiar with online learning tools and platforms had an easier time adapting to online learning than those who were not. However, the study also found that students who were not familiar with online learning tools were able to adapt with proper support from their teachers and institutions.

Another study published in Computers & Education (Tang et al., 2023) compared the academic performance of students in online and traditional classroom settings during the pandemic. The study found that while there were no significant differences in the grades of students in the two settings, students in online classes reported higher levels of stress and lower levels of satisfaction with their learning experience.

Methodology in a thesis refers to the overall approach and systematic process that a researcher follows to collect and analyze data in order to answer their research question(s) or achieve their research objectives. It includes the research design, data collection methods, sampling techniques, data analysis procedures, and any other relevant procedures that the researcher uses to conduct their research.

For example, let’s consider a thesis on the impact of social media on mental health among teenagers. The methodology for this thesis might involve the following steps:

Research Design:

The researcher may choose to conduct a quantitative study using a survey questionnaire to collect data on social media usage and mental health among teenagers. Alternatively, they may conduct a qualitative study using focus group discussions or interviews to gain a deeper understanding of the experiences and perspectives of teenagers regarding social media and mental health.

Sampling Techniques:

The researcher may use random sampling to select a representative sample of teenagers from a specific geographic location or demographic group, or they may use purposive sampling to select participants who meet specific criteria such as age, gender, or mental health status.

Data Collection Methods:

The researcher may use an online survey tool to collect data on social media usage and mental health, or they may conduct face-to-face interviews or focus group discussions to gather qualitative data. They may also use existing data sources such as medical records or social media posts.

Data Analysis Procedures:

The researcher may use statistical analysis techniques such as regression analysis to examine the relationship between social media usage and mental health, or they may use thematic analysis to identify key themes and patterns in the qualitative data.

Ethical Considerations: The researcher must ensure that their research is conducted in an ethical manner, which may involve obtaining informed consent from participants, protecting their confidentiality, and ensuring that their rights and welfare are respected.

In a thesis, the “Results” section typically presents the findings of the research conducted by the author. This section typically includes both quantitative and qualitative data, such as statistical analyses, tables, figures, and other relevant data.

Here are some examples of how the “Results” section of a thesis might look:

Example 1: A quantitative study on the effects of exercise on cardiovascular health

In this study, the author conducts a randomized controlled trial to investigate the effects of exercise on cardiovascular health in a group of sedentary adults. The “Results” section might include tables showing the changes in blood pressure, cholesterol levels, and other relevant indicators in the exercise and control groups over the course of the study. The section might also include statistical analyses, such as t-tests or ANOVA, to demonstrate the significance of the results.

Example 2: A qualitative study on the experiences of immigrant families in a new country

In this study, the author conducts in-depth interviews with immigrant families to explore their experiences of adapting to a new country. The “Results” section might include quotes from the interviews that illustrate the participants’ experiences, as well as a thematic analysis that identifies common themes and patterns in the data. The section might also include a discussion of the implications of the findings for policy and practice.

A thesis discussion section is an opportunity for the author to present their interpretation and analysis of the research results. In this section, the author can provide their opinion on the findings, compare them with other literature, and suggest future research directions.

For example, let’s say the thesis topic is about the impact of social media on mental health. The author has conducted a survey among 500 individuals and has found that there is a significant correlation between excessive social media use and poor mental health.

In the discussion section, the author can start by summarizing the main findings and stating their interpretation of the results. For instance, the author may argue that excessive social media use is likely to cause mental health problems due to the pressure of constantly comparing oneself to others, fear of missing out, and cyberbullying.

Next, the author can compare their results with other studies and point out similarities and differences. They can also identify any limitations in their research design and suggest future directions for research.

For example, the author may point out that their study only measured social media use and mental health at one point in time, and it is unclear whether one caused the other or whether there are other confounding factors. Therefore, they may suggest longitudinal studies that follow individuals over time to better understand the causal relationship.

Writing a conclusion for a thesis is an essential part of the overall writing process. The conclusion should summarize the main points of the thesis and provide a sense of closure to the reader. It is also an opportunity to reflect on the research process and offer suggestions for further study.

Here is an example of a conclusion for a thesis:

After an extensive analysis of the data collected, it is evident that the implementation of a new curriculum has had a significant impact on student achievement. The findings suggest that the new curriculum has improved student performance in all subject areas, and this improvement is particularly notable in math and science. The results of this study provide empirical evidence to support the notion that curriculum reform can positively impact student learning outcomes.

In addition to the positive results, this study has also identified areas for future research. One limitation of the current study is that it only examines the short-term effects of the new curriculum. Future studies should explore the long-term effects of the new curriculum on student performance, as well as investigate the impact of the curriculum on students with different learning styles and abilities.

Overall, the findings of this study have important implications for educators and policymakers who are interested in improving student outcomes. The results of this study suggest that the implementation of a new curriculum can have a positive impact on student achievement, and it is recommended that schools and districts consider curriculum reform as a means of improving student learning outcomes.

References in a thesis typically follow a specific format depending on the citation style required by your academic institution or publisher.

Below are some examples of different citation styles and how to reference different types of sources in your thesis:

In-text citation format: (Author, Year)

Reference list format for a book: Author, A. A. (Year of publication). Title of work: Capital letter also for subtitle. Publisher.

Example: In-text citation: (Smith, 2010) Reference list entry: Smith, J. D. (2010). The art of writing a thesis. Cambridge University Press.

Reference list format for a journal article: Author, A. A., Author, B. B., & Author, C. C. (Year of publication). Title of article. Title of Journal, volume number(issue number), page range.

Example: In-text citation: (Brown, 2015) Reference list entry: Brown, E., Smith, J., & Johnson, L. (2015). The impact of social media on academic performance. Journal of Educational Psychology, 108(3), 393-407.

In-text citation format: (Author page number)

Works Cited list format for a book: Author. Title of Book. Publisher, Year of publication.

Example: In-text citation: (Smith 75) Works Cited entry: Smith, John D. The Art of Writing a Thesis. Cambridge University Press, 2010.

Works Cited list format for a journal article: Author(s). “Title of Article.” Title of Journal, volume number, issue number, date, pages.

Example: In-text citation: (Brown 394) Works Cited entry: Brown, Elizabeth, et al. “The Impact of Social Media on Academic Performance.” Journal of Educational Psychology, vol. 108, no. 3, 2015, pp. 393-407.

Chicago Style

In-text citation format: (Author year, page number)

Bibliography list format for a book: Author. Title of Book. Place of publication: Publisher, Year of publication.

Example: In-text citation: (Smith 2010, 75) Bibliography entry: Smith, John D. The Art of Writing a Thesis. Cambridge: Cambridge University Press, 2010.

Bibliography list format for a journal article: Author. “Title of Article.” Title of Journal volume number, no. issue number (date): page numbers.

Example: In-text citation: (Brown 2015, 394) Bibliography entry: Brown, Elizabeth, John Smith, and Laura Johnson. “The Impact of Social Media on Academic Performance.” Journal of Educational Psychology 108, no. 3 (2015): 393-407.

Reference list format for a book: [1] A. A. Author, Title of Book. City of Publisher, Abbrev. of State: Publisher, year.

Example: In-text citation: [1] Reference list entry: A. J. Smith, The Art of Writing a Thesis. New York, NY: Academic Press, 2010.

Reference list format for a journal article: [1] A. A. Author, “Title of Article,” Title of Journal, vol. x, no. x, pp. xxx-xxx, Month year.

Example: In-text citation: [1] Reference list entry: E. Brown, J. D. Smith, and L. Johnson, “The Impact of Social Media on Academic Performance,” Journal of Educational Psychology, vol. 108, no. 3, pp. 393-407, Mar. 2015.

An appendix in a thesis is a section that contains additional information that is not included in the main body of the document but is still relevant to the topic being discussed. It can include figures, tables, graphs, data sets, sample questionnaires, or any other supplementary material that supports your thesis.

Here is an example of how you can format appendices in your thesis:

• Title page: The appendix should have a separate title page that lists the title, author’s name, the date, and the document type (i.e., thesis or dissertation). The title page should be numbered as the first page of the appendix section.
• Table of contents: If you have more than one appendix, you should include a separate table of contents that lists each appendix and its page number. The table of contents should come after the title page.
• Appendix sections: Each appendix should have its own section with a clear and concise title that describes the contents of the appendix. Each section should be numbered with Arabic numerals (e.g., Appendix 1, Appendix 2, etc.). The sections should be listed in the table of contents.
• Formatting: The formatting of the appendices should be consistent with the rest of the thesis. This includes font size, font style, line spacing, and margins.
• Example: Here is an example of what an appendix might look like in a thesis on the topic of climate change:

Appendix 1: Data Sources

This appendix includes a list of the primary data sources used in this thesis, including their URLs and a brief description of the data they provide.

Appendix 2: Survey Questionnaire

This appendix includes the survey questionnaire used to collect data from participants in the study.

Appendix 3: Additional Figures

This appendix includes additional figures that were not included in the main body of the thesis due to space limitations. These figures provide additional support for the findings presented in the thesis.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Delimitations in Research – Types, Examples and...

Research Design – Types, Methods and Examples

Dissertation Methodology – Structure, Example...

What is a Hypothesis – Types, Examples and...

Dissertation – Format, Example and Template

Dissertation vs Thesis – Key Differences

• Skip to main content
• Skip to secondary menu
• Skip to primary sidebar
• Skip to footer

Erin Wright Writing

Writing-Related Software Tutorials

How to Adjust Page Margins in Microsoft Word (Three Methods)

By Erin Wright

This tutorial shows three different ways to adjust page margins in Microsoft Word:

• Adjust page margins with the ruler
• Use preset margins
• Create custom margins

This tutorial is also available as a YouTube video showing all the steps in real time.

Watch more than 250 other document software tutorials on my YouTube channel .

The images below are from Word in Microsoft 365. The steps are the same in Word 2019, Word 2016, Word 2013, and Word 2010. However, your interface may look slightly different in those older versions of the software.

Adjust Page Margins with the Ruler

The ruler method is only recommended for short documents. If your document is long or has multiple sections, see the preset and custom margin methods below.

Important note: Skip to step 3 if your ruler is already visible.

• Select the View tab in the ribbon.

• Select Ruler in the Show group.

• Press Ctrl + A on your keyboard to select the entire document.

Pro Tip: Select All from the Ribbon

As an alternative to Ctrl + A, you can select the entire document from the ribbon:

1. Select the Home tab in the ribbon.

2. Select the Select button in the Editing group.

3. Select the Select All option from the drop-down menu.

• Hover your cursor over the inner border of the gray area on the left or right end of the horizontal ruler until your cursor becomes a double arrow. (You should see a tooltip that says, “Left margin” or “Right margin.”)

• Slide the double-arrow cursor to the left or right to adjust the margin.
• To adjust the top or bottom margins, hover your cursor over the inner border of the gray area of the vertical ruler until your cursor becomes a double arrow. Then, slide the double-arrow cursor up or down to adjust the margin.

Should You Adjust Margins with the Ruler Marker?

The square ruler marker in the horizontal ruler can be used to move the left edge of the text.

However, this technique indents your text; it doesn’t adjust the margin.

Although the visual effect is the same, creating unnecessary indents can cause problems with other formatting within longer documents.

The preset method and custom method shown below offer more precise control over margins.

Use Preset Margins

Important note: Preset margins only affect your current section. If you want to apply a preset to an entire document with multiple sections, press Ctrl + A to select the entire document before performing these steps.

• Select the Layout tab in the ribbon.

• Select the Margins button in the Page Setup group.

• Select one of the preset margins from the drop-down menu:
• Mirrored (This is for binding documents like a book.)
• Office 2003 Default

After you make your selection, the Margins drop-down menu will close, and your margins will adjust immediately.

Pro Tip: The preset menu is also available in the Print tab in the backstage view.

Create Custom Margins

• Select the Layout tab in the ribbon (see figure 7).
• Select the dialog box launcher in the Page Setup group.

• Enter your new margins in inches (whole numbers or decimals) in the Top, Left, Bottom, and Right text boxes in the Page Setup dialog box.

• Select a location in the Apply to menu:
• This section
• This point forward
• Whole document

The This section option won’t appear if your document doesn’t have section breaks .

• Select the OK button to close the Page Setup dialog box.

As always, save your file to save your changes.

Related Resources

How to Set Gutter Margins in Microsoft Word (PC & Mac)

How to Adjust Line Spacing in Microsoft Word

How to Create, Change, and Delete Tabs in Microsoft Word

Three Ways to Indent Paragraphs in Microsoft Word

How to Adjust Letter Spacing in Microsoft Word (PC & Mac)

How to Adjust the Space between Words in Microsoft Word

Updated September 03, 2023

• Microsoft Word Tutorials
• Adobe Acrobat Tutorials
• PowerPoint Tutorials
• Writing Tips
• Editing Tips
• Writing-Related Resources

University of South Florida

Office of Graduate Studies

Main navigation, page margins.

Page margins should be set to 1" on each side throughout the entire manuscript. All sections of the manuscript have the same margin requirements.

Ensure that content (tables, figures, any text) does not overflow into the margins.

Margins can be set in Microsoft Word using the page layout tab on the main menu (PC) or on the formatting palette (Mac). 

Do not use the indent arrows or tabs located on the ruler to set the page margin. Likewise, do not change the margins to indent text. If indentation is required within the body of the manuscript (i.e., indent of quotes, paragraphs, etc.), the indent function (arrows along the top ruler) should be used. 

Show/View Ruler

Be sure to enable ‘Rulers’ to see the margins and manage text indenting/wrapping. Use the rulers to confirm that the margins are correct.

In Word, click on the ‘View’ tab and then check the Ruler in the ‘Show’ section.

Both in Word and in Pages (Mac), the margins should show as gray shaded areas along the ruler.

Bonus Tip: Select "Ctrl + U" while in the Adobe PDF viewer to view the page Grid.

• Formatting Your Dissertation
• Introduction

Harvard Griffin GSAS strives to provide students with timely, accurate, and clear information. If you need help understanding a specific policy, please contact the office that administers that policy.

• Application for Degree
• Credit for Completed Graduate Work
• Ad Hoc Degree Programs
• Acknowledging the Work of Others
• Advanced Planning
• Dissertation Advisory Committee
• Dissertation Submission Checklist
• Publishing Options
• Submitting Your Dissertation
• English Language Proficiency
• PhD Program Requirements
• Secondary Fields
• Year of Graduate Study (G-Year)
• Master's Degrees
• Grade and Examination Requirements
• Conduct and Safety
• Financial Aid
• Non-Resident Students
• Registration

On this page:

Language of the Dissertation

Page and text requirements, body of text, tables, figures, and captions, dissertation acceptance certificate, copyright statement.

• Table of Contents

Front and Back Matter

Supplemental material, dissertations comprising previously published works, top ten formatting errors, further questions.

• Related Contacts and Forms

When preparing the dissertation for submission, students must follow strict formatting requirements. Any deviation from these requirements may lead to rejection of the dissertation and delay in the conferral of the degree.

The language of the dissertation is ordinarily English, although some departments whose subject matter involves foreign languages may accept a dissertation written in a language other than English.

Most dissertations are 100 to 300 pages in length. All dissertations should be divided into appropriate sections, and long dissertations may need chapters, main divisions, and subdivisions.

• 8½ x 11 inches, unless a musical score is included
• At least 1 inch for all margins
• Body of text: double spacing
• Block quotations, footnotes, and bibliographies: single spacing within each entry but double spacing between each entry
• Table of contents, list of tables, list of figures or illustrations, and lengthy tables: single spacing may be used

Fonts and Point Size

Use 10-12 point size. Fonts must be embedded in the PDF file to ensure all characters display correctly. 

Recommended Fonts

If you are unsure whether your chosen font will display correctly, use one of the following fonts: 

If fonts are not embedded, non-English characters may not appear as intended. Fonts embedded improperly will be published to DASH as-is. It is the student’s responsibility to make sure that fonts are embedded properly prior to submission. 

Instructions for Embedding Fonts

To embed your fonts in recent versions of Word, follow these instructions from Microsoft:

• Click the File tab and then click Options .
• In the left column, select the Save tab.
• Clear the Do not embed common system fonts check box.

For reference, below are some instructions from ProQuest UMI for embedding fonts in older file formats:

To embed your fonts in Microsoft Word 2010:

• In the File pull-down menu click on Options .
• Choose Save on the left sidebar.
• Check the box next to Embed fonts in the file.
• Click the OK button.
• Save the document.

Note that when saving as a PDF, make sure to go to “more options” and save as “PDF/A compliant”

To embed your fonts in Microsoft Word 2007:

• Click the circular Office button in the upper left corner of Microsoft Word.
• A new window will display. In the bottom right corner select Word Options . 
• Choose Save from the left sidebar.

Using Microsoft Word on a Mac:

Microsoft Word 2008 on a Mac OS X computer will automatically embed your fonts while converting your document to a PDF file.

If you are converting to PDF using Acrobat Professional (instructions courtesy of the Graduate Thesis Office at Iowa State University):  

• Open your document in Microsoft Word. 
• Click on the Adobe PDF tab at the top. Select "Change Conversion Settings." 
• Click on Advanced Settings. 
• Click on the Fonts folder on the left side of the new window. In the lower box on the right, delete any fonts that appear in the "Never Embed" box. Then click "OK." 
• If prompted to save these new settings, save them as "Embed all fonts." 
• Now the Change Conversion Settings window should show "embed all fonts" in the Conversion Settings drop-down list and it should be selected. Click "OK" again. 
• Click on the Adobe PDF link at the top again. This time select Convert to Adobe PDF. Depending on the size of your document and the speed of your computer, this process can take 1-15 minutes. 
• After your document is converted, select the "File" tab at the top of the page. Then select "Document Properties." 
• Click on the "Fonts" tab. Carefully check all of your fonts. They should all show "(Embedded Subset)" after the font name. 
•  If you see "(Embedded Subset)" after all fonts, you have succeeded.

The font used in the body of the text must also be used in headers, page numbers, and footnotes. Exceptions are made only for tables and figures created with different software and inserted into the document.

Tables and figures must be placed as close as possible to their first mention in the text. They may be placed on a page with no text above or below, or they may be placed directly into the text. If a table or a figure is alone on a page (with no narrative), it should be centered within the margins on the page. Tables may take up more than one page as long as they obey all rules about margins. Tables and figures referred to in the text may not be placed at the end of the chapter or at the end of the dissertation.

• Given the standards of the discipline, dissertations in the Department of History of Art and Architecture and the Department of Architecture, Landscape Architecture, and Urban Planning often place illustrations at the end of the dissertation.

Figure and table numbering must be continuous throughout the dissertation or by chapter (e.g., 1.1, 1.2, 2.1, 2.2, etc.). Two figures or tables cannot be designated with the same number. If you have repeating images that you need to cite more than once, label them with their number and A, B, etc. 

Headings should be placed at the top of tables. While no specific rules for the format of table headings and figure captions are required, a consistent format must be used throughout the dissertation (contact your department for style manuals appropriate to the field).

Captions should appear at the bottom of any figures. If the figure takes up the entire page, the caption should be placed alone on the preceding page, centered vertically and horizontally within the margins.

Each page receives a separate page number. When a figure or table title is on a preceding page, the second and subsequent pages of the figure or table should say, for example, “Figure 5 (Continued).” In such an instance, the list of figures or tables will list the page number containing the title. The word “figure” should be written in full (not abbreviated), and the “F” should be capitalized (e.g., Figure 5). In instances where the caption continues on a second page, the “(Continued)” notation should appear on the second and any subsequent page. The figure/table and the caption are viewed as one entity and the numbering should show correlation between all pages. Each page must include a header.

Landscape orientation figures and tables must be positioned correctly and bound at the top so that the top of the figure or table will be at the left margin. Figure and table headings/captions are placed with the same orientation as the figure or table when on the same page. When on a separate page, headings/captions are always placed in portrait orientation, regardless of the orientation of the figure or table. Page numbers are always placed as if the figure were vertical on the page.

If a graphic artist does the figures, Harvard Griffin GSAS will accept lettering done by the artist only within the figure. Figures done with software are acceptable if the figures are clear and legible. Legends and titles done by the same process as the figures will be accepted if they too are clear, legible, and run at least 10 or 12 characters per inch. Otherwise, legends and captions should be printed with the same font used in the text.

Original illustrations, photographs, and fine arts prints may be scanned and included, centered between the margins on a page with no text above or below.

Use of Third-Party Content

In addition to the student's own writing, dissertations often contain third-party content or in-copyright content owned by parties other than you, the student who authored the dissertation. The Office for Scholarly Communication recommends consulting the information below about fair use, which allows individuals to use in-copyright content, on a limited basis and for specific purposes, without seeking permission from copyright holders.

Because your dissertation will be made available for online distribution through DASH , Harvard's open-access repository, it is important that any third-party content in it may be made available in this way.

Fair Use and Copyright 

What is fair use?

Fair use is a provision in copyright law that allows the use of a certain amount of copyrighted material without seeking permission. Fair use is format- and media-agnostic. This means fair use may apply to images (including photographs, illustrations, and paintings), quoting at length from literature, videos, and music regardless of the format. 

How do I determine whether my use of an image or other third-party content in my dissertation is fair use?  

There are four factors you will need to consider when making a fair use claim.

1) For what purpose is your work going to be used?

• Nonprofit, educational, scholarly, or research use favors fair use. Commercial, non-educational uses, often do not favor fair use.
• A transformative use (repurposing or recontextualizing the in-copyright material) favors fair use. Examining, analyzing, and explicating the material in a meaningful way, so as to enhance a reader's understanding, strengthens your fair use argument. In other words, can you make the point in the thesis without using, for instance, an in-copyright image? Is that image necessary to your dissertation? If not, perhaps, for copyright reasons, you should not include the image.  

2) What is the nature of the work to be used?

• Published, fact-based content favors fair use and includes scholarly analysis in published academic venues. 
• Creative works, including artistic images, are afforded more protection under copyright, and depending on your use in light of the other factors, may be less likely to favor fair use; however, this does not preclude considerations of fair use for creative content altogether.

3) How much of the work is going to be used?  

• Small, or less significant, amounts favor fair use. A good rule of thumb is to use only as much of the in-copyright content as necessary to serve your purpose. Can you use a thumbnail rather than a full-resolution image? Can you use a black-and-white photo instead of color? Can you quote select passages instead of including several pages of the content? These simple changes bolster your fair use of the material.

4) What potential effect on the market for that work may your use have?

• If there is a market for licensing this exact use or type of educational material, then this weighs against fair use. If however, there would likely be no effect on the potential commercial market, or if it is not possible to obtain permission to use the work, then this favors fair use. 

For further assistance with fair use, consult the Office for Scholarly Communication's guide, Fair Use: Made for the Harvard Community and the Office of the General Counsel's Copyright and Fair Use: A Guide for the Harvard Community .

What are my options if I don’t have a strong fair use claim? 

Consider the following options if you find you cannot reasonably make a fair use claim for the content you wish to incorporate:

• Seek permission from the copyright holder. 
• Use openly licensed content as an alternative to the original third-party content you intended to use. Openly-licensed content grants permission up-front for reuse of in-copyright content, provided your use meets the terms of the open license.
• Use content in the public domain, as this content is not in-copyright and is therefore free of all copyright restrictions. Whereas third-party content is owned by parties other than you, no one owns content in the public domain; everyone, therefore, has the right to use it.

For use of images in your dissertation, please consult this guide to Finding Public Domain & Creative Commons Media , which is a great resource for finding images without copyright restrictions. 

Who can help me with questions about copyright and fair use?

Contact your Copyright First Responder . Please note, Copyright First Responders assist with questions concerning copyright and fair use, but do not assist with the process of obtaining permission from copyright holders.

Pages should be assigned a number except for the Dissertation Acceptance Certificate . Preliminary pages (abstract, table of contents, list of tables, graphs, illustrations, and preface) should use small Roman numerals (i, ii, iii, iv, v, etc.). All pages must contain text or images.  

Count the title page as page i and the copyright page as page ii, but do not print page numbers on either page .

For the body of text, use Arabic numbers (1, 2, 3, 4, 5, etc.) starting with page 1 on the first page of text. Page numbers must be centered throughout the manuscript at the top or bottom. Every numbered page must be consecutively ordered, including tables, graphs, illustrations, and bibliography/index (if included); letter suffixes (such as 10a, 10b, etc.) are not allowed. It is customary not to have a page number on the page containing a chapter heading.

• Check pagination carefully. Account for all pages.

A copy of the Dissertation Acceptance Certificate (DAC) should appear as the first page. This page should not be counted or numbered. The DAC will appear in the online version of the published dissertation. The author name and date on the DAC and title page should be the same. 

The dissertation begins with the title page; the title should be as concise as possible and should provide an accurate description of the dissertation. The author name and date on the DAC and title page should be the same. 

• Do not print a page number on the title page. It is understood to be page  i  for counting purposes only.

A copyright notice should appear on a separate page immediately following the title page and include the copyright symbol ©, the year of first publication of the work, and the name of the author:

© [ year ] [ Author’s Name ] All rights reserved.

Alternatively, students may choose to license their work openly under a  Creative Commons  license. The author remains the copyright holder while at the same time granting up-front permission to others to read, share, and (depending on the license) adapt the work, so long as proper attribution is given. (By default, under copyright law, the author reserves all rights; under a Creative Commons license, the author reserves some rights.)

• Do  not  print a page number on the copyright page. It is understood to be page  ii  for counting purposes only.

An abstract, numbered as page  iii , should immediately follow the copyright page and should state the problem, describe the methods and procedures used, and give the main results or conclusions of the research. The abstract will appear in the online and bound versions of the dissertation and will be published by ProQuest. There is no maximum word count for the abstract. 

• double-spaced
• left-justified
• indented on the first line of each paragraph
• The author’s name, right justified
• The words “Dissertation Advisor:” followed by the advisor’s name, left-justified (a maximum of two advisors is allowed)
• Title of the dissertation, centered, several lines below author and advisor

Dissertations divided into sections must contain a table of contents that lists, at minimum, the major headings in the following order:

• Front Matter
• Body of Text
• Back Matter

Front matter includes (if applicable):

• acknowledgements of help or encouragement from individuals or institutions
• a dedication
• a list of illustrations or tables
• a glossary of terms
• one or more epigraphs.

Back matter includes (if applicable):

• bibliography
• supplemental materials, including figures and tables
• an index (in rare instances).

Supplemental figures and tables must be placed at the end of the dissertation in an appendix, not within or at the end of a chapter. If additional digital information (including audio, video, image, or datasets) will accompany the main body of the dissertation, it should be uploaded as a supplemental file through ProQuest ETD . Supplemental material will be available in DASH and ProQuest and preserved digitally in the Harvard University Archives.

As a matter of copyright, dissertations comprising the student's previously published works must be authorized for distribution from DASH. The guidelines in this section pertain to any previously published material that requires permission from publishers or other rightsholders before it may be distributed from DASH. Please note:

• Authors whose publishing agreements grant the publisher exclusive rights to display, distribute, and create derivative works will need to seek the publisher's permission for nonexclusive use of the underlying works before the dissertation may be distributed from DASH.
• Authors whose publishing agreements indicate the authors have retained the relevant nonexclusive rights to the original materials for display, distribution, and the creation of derivative works may distribute the dissertation as a whole from DASH without need for further permissions.

It is recommended that authors consult their publishing agreements directly to determine whether and to what extent they may have transferred exclusive rights under copyright. The Office for Scholarly Communication (OSC) is available to help the author determine whether she has retained the necessary rights or requires permission. Please note, however, the Office of Scholarly Communication is not able to assist with the permissions process itself.

• Missing Dissertation Acceptance Certificate.  The first page of the PDF dissertation file should be a scanned copy of the Dissertation Acceptance Certificate (DAC). This page should not be counted or numbered as a part of the dissertation pagination.
• Conflicts Between the DAC and the Title Page.  The DAC and the dissertation title page must match exactly, meaning that the author name and the title on the title page must match that on the DAC. If you use your full middle name or just an initial on one document, it must be the same on the other document.  
• Abstract Formatting Errors. The advisor name should be left-justified, and the author's name should be right-justified. Up to two advisor names are allowed. The Abstract should be double spaced and include the page title “Abstract,” as well as the page number “iii.” There is no maximum word count for the abstract. 
•  The front matter should be numbered using Roman numerals (iii, iv, v, …). The title page and the copyright page should be counted but not numbered. The first printed page number should appear on the Abstract page (iii). 
• The body of the dissertation should be numbered using Arabic numbers (1, 2, 3, …). The first page of the body of the text should begin with page 1. Pagination may not continue from the front matter. 
• All page numbers should be centered either at the top or the bottom of the page.
• Figures and tables Figures and tables must be placed within the text, as close to their first mention as possible. Figures and tables that span more than one page must be labeled on each page. Any second and subsequent page of the figure/table must include the “(Continued)” notation. This applies to figure captions as well as images. Each page of a figure/table must be accounted for and appropriately labeled. All figures/tables must have a unique number. They may not repeat within the dissertation.
• Any figures/tables placed in a horizontal orientation must be placed with the top of the figure/ table on the left-hand side. The top of the figure/table should be aligned with the spine of the dissertation when it is bound. 
• Page numbers must be placed in the same location on all pages of the dissertation, centered, at the bottom or top of the page. Page numbers may not appear under the table/ figure.
• Supplemental Figures and Tables. Supplemental figures and tables must be placed at the back of the dissertation in an appendix. They should not be placed at the back of the chapter. 
• Permission Letters Copyright. permission letters must be uploaded as a supplemental file, titled ‘do_not_publish_permission_letters,” within the dissertation submission tool.
•  DAC Attachment. The signed Dissertation Acceptance Certificate must additionally be uploaded as a document in the "Administrative Documents" section when submitting in Proquest ETD . Dissertation submission is not complete until all documents have been received and accepted.
• Overall Formatting. The entire document should be checked after all revisions, and before submitting online, to spot any inconsistencies or PDF conversion glitches.
• You can view dissertations successfully published from your department in DASH . This is a great place to check for specific formatting and area-specific conventions.
• Contact the  Office of Student Affairs  with further questions.

CONTACT INFO

Katie riggs, explore events.

Free All-in-One Office Suite with PDF Editor

Edit Word, Excel, and PPT for FREE.

Read, edit, and convert PDFs with the powerful PDF toolkit.

Microsoft-like interface, easy to use.

Windows • MacOS • Linux • iOS • Android

Select areas that need to improve

• Didn't match my interface
• Too technical or incomprehensible
• Incorrect operation instructions
• Incomplete instructions on this function

Fields marked * are required please

Please leave your suggestions below

• Quick Tutorials
• Practical Skills

How to Change Margins in Word? [For Students]

As an editor, understanding page formatting is key, especially when preparing documents for print or online publication. When I first started editing, I encountered challenges with formatting, particularly when trying to adjust margins for printed articles. If you're working on a paper, thesis, or essay, and need to print it for submission, but the formatting in the preview version doesn't align with your requirements. In this guide, I'll show you how to change margins in Word so they fit your formatting, ensuring your document looks just right for printing.

APA & MLA & Chicago Styles of Margins

Formatting a research paper consistently is crucial for academic success.  Among the essential elements of formatting is setting the margins correctly. Here's a closer look at how APA, MLA, and Chicago styles handle margins:

APA (American Psychological Association) style:

One-inch margins are the standard on all sides of the paper (top, bottom, left, and right). This creates a clean and balanced layout that facilitates readability and allows for instructor comments in the margins.

MLA (Modern Language Association) style:

Similar to APA, MLA also recommends one-inch margins on all sides of the paper. This consistency ensures a professional presentation and promotes a reader-friendly experience.

Chicago (Chicago Manual of Style) style:

Chicago offers a bit more flexibility compared to APA and MLA. It allows for one-inch margins or larger margins. While one inch is perfectly acceptable, some instructors or publishers might prefer slightly larger margins, such as 1.25 inches. This extra space can enhance readability, especially for longer or complex documents.

While Microsoft Office Word is often the go-to choice for students, WPS Office offers a convenient alternative, especially when it comes to printing and formatting documents. In this demonstration, I'll use WPS Office to show you how to achieve the same results you would with Word. WPS Office is a free software compatible with all Word document versions, and it even allows you to convert your papers to PDF format without sacrificing formatting. Whether you're using a mobile device, Windows, or Mac, WPS Office ensures seamless compatibility and efficient document management.

Change Margins on the View Tab?

The first method we'll explore involves using the ruler, which can be enabled from the view tab. This method is recommended only when you're dealing with short documents, such as class assignments or short survey reports. If you're wondering how to see the margins in Word , this method will help you. With the ruler enabled, margins are visible and adjusted accordingly.

Step 1 : Open your academic document in WPS Writer, which you need to quickly adjust margins for.

Step 2 : If the ruler is not enabled in the WPS Writer interface, visit the "View" tab and then check the "Ruler" checkbox to enable it.

Step 3 : Now, press "Ctrl + A" to select the entire document, or if you need to set margins for different pages, use your cursor to select the preferred pages.

Step 4 : Once the text has been selected, move your cursor to the horizontal ruler, and slide the ruler left or right to adjust the margins.

Step 5 : Once the margins have been set, format the document if any formatting errors occur due to the changing margins of pages.

Change Margins on the Layout Tab

Margins can also be custom set using the layout tab in WPS Writer. This method usually comes in handy for me when I'm writing reports or thesis for a course where I need to follow an academic style. So, if you're stuck with a thesis and looking for how to set or adjust margins in Word on the internet, don't worry, I've got you covered! Just follow these steps:

Step 1 : Launch WPS Writer and open the academic document for which you need custom margins.

Step 2 : Head over to the Page Layout tab in the toolbar, and then click on "Margins" to view the pre-set margins.

Step 3 : In the Margins drop-down menu, select from Normal, Narrow, Moderate, or Wide margins for your academic work.

Step 4 : If you wish to set custom margins, WPS Writer gives students quick access to set their custom margins in the Page Layout ribbon.

Change Margins when Printing

Short on time to submit a hard copy of your work to the instructor? WPS Writer provides a solution for such situations as well, allowing students to adjust margins or even set them according to their academic style right before printing the document.

Step 1 : So, let's open the document in WPS Writer that we want to print after adjusting the margins.

Step 2 : Once the document is open, click on the "Menu" button at the top left corner.

Step 3 : Now, hover over the "Print" option in the menu and then select "Print Preview" from the flyout menu.

Step 4 : In the print preview, go to the "Page Margins" field and click to expand margin options.

Step 5 : In the dropdown, students can select from one of the pre-set margins in WPS Writer.

Step 6 : If you want to set custom margins, click on "Custom Margins.." to open the Page Setup dialog.

Step 7 : In the Page Setup dialog, students can define the page margins they want for their entire document to be printed. Once all the margins have been entered, press "OK".

Step 8 : Now that you have adjusted or set up the page margins of your document, press "Enter" on your keyboard to print the document.

With WPS Writer, adjusting or setting margins for your academic documents becomes hassle-free. With three different methods to choose from, I would recommend choosing the ruler method only when the margin conditions are not set by your instructor, as accuracy of margins is an issue. Using the ruler, students can adjust margins to alter the page length and width and also determine how many pages they want to fit their work. However, for reports or theses where margins need to be set according to academic styles, this method can lead to negative marking.

With custom margins, students can align their work with the preferred academic style, with the only drawback being that it might take up some time. So, if you plan to use this method, make sure to do it timely to avoid any last-minute stress.

I would only suggest the printing method when you're running late because it could lead to formatting errors ruining the look of the entire document, so be careful with this one.

Bonus Tips: Convert Word to PDF without Losing Format

Formatting a document according to specific styles like MLA, APA, or Chicago can be tricky, especially if you're not familiar with their unique requirements. It becomes even more daunting when, after putting in the effort to get everything just right, you need to convert the document to PDF. A single misstep can lead to hours of reformatting. To avoid this headache, consider using WPS Office and its WPS PDF tool for conversion. With WPS Office , you can maintain your carefully crafted formatting, ensuring your document looks just as you intended after conversion. This not only preserves your work but also makes sharing much easier. Plus, WPS Office's intuitive interface helps you stay organized and focused on your content rather than worrying about technical glitches.

Here is how students can save their work as a PDF in WPS Writer, avoiding any formatting errors that may arise during conversion.

Step 1 : Open the Word document in WPS Writer that you want to convert into a PDF.

Step 2 : Click on the Menu button located at the top left corner of WPS Writer's interface.

Step 3 : In the menu, select "Export to PDF" to open the export to PDF dialog box.

Step 4 : Now, in the Export Type field, select "Common PDF" and then click on "Export to PDF".

Your PDF file is now saved. To view it, simply open it with WPS PDF, your true all-in-one office suite that fulfills all your needs.

Use Word, Excel, and PPT for FREE, No Ads.

Edit PDF files with the powerful PDF toolkit.

Microsoft-like interface. Easy to learn. 100% Compatibility.

Boost your productivity with WPS's abundant free Word, Excel, PPT, and CV templates.

FAQs about Changing Margins in Word

1. can i print without margin.

Printing without margins can be useful when you need to maximize the printable area of a page. Adobe Reader provides an option for borderless printing, allowing you to print without margins. Follow the steps below to print without margins using Adobe Reader:

Step 1 : Open Adobe Reader and navigate to the "File" tab.

Step 2 : Select "Print" from the dropdown menu.

Step 3 : Choose your printer from the options provided.

Step 4 : Click on "Properties" to access the printer settings.

Step 5 : Look for the option labeled "Borderless Printing" and select it.

Step 6 : Click "OK" to save your settings.

Step 7 : Proceed with printing your document without margins.

2. Can I change the margins of just one page in Word?

Yes, for changing the margin of just one page, you have to add a section break to the page first and then change margin for the page.

Step 1 : Open the Word document.

Step 2 : Go to the page you want to change the margins for.

Step 3 : Place the cursor on the specific page.

Step 4 : Select Insert > Sections & Pages > Break > Section Break > Next Page.

Step 5 : Navigate to Page Setup > Margins.

Step 6 : Click Custom Margins.

Step 7 : Adjust the margins for the top, bottom, left, and right sides of the page using the up and down arrows or by typing specific values.

Step 8 : Click OK to apply the custom margins to the selected page.

3. How to change margins in Word without moving the header?

Step 1 : Open your document in Microsoft Word.

Step 2 : Double-click on the header area of the document to activate the header section.

Step 3 : The Header & Footer Tools tab will appear automatically. If not, ensure that you're on the "Design" tab, and the Header & Footer Tools tab should be displayed.

Step 4 : In the "Position" group on the Header & Footer Tools tab, locate the "Header from Top" option.

Step 5 : Click on the "Header from Top" dropdown menu and select the desired measurement unit (e.g., inches or centimeters).

Step 6 : Enter the new value for the distance between the top of the page and the header content. For example, entering "0.25" would set the header 0.25 inches from the top of the page.

Step 7 : Press Enter or click outside the header area to apply the changes.

Step 8 : To verify the changes, you can scroll down through the document to ensure that the header position has been adjusted accordingly.

Step 9 : If you need to make further adjustments, repeat the process by double-clicking on the header area and modifying the "Header from Top" value as needed.

Step 10 : Once you're satisfied with the header position, you can continue editing or close the header by double-clicking outside the header area or clicking on the "Close Header and Footer" button on the Header & Footer Tools tab.

Effortless Margin Adjustments for Students

Margins are crucial for maintaining a clean and professional appearance in your documents. If you're following a specific format, such as APA, MLA, or Chicago, knowing how to change margins in Word is not just optional; mandatory. WPS Office makes it incredibly simple to set and adjust margins, ensuring your work meets the required standards. Plus, WPS Office makes sharing and converting files a breeze, so you can focus on your content without worrying about technical issues. If you're a student, give WPS Office a try and see if it suits your needs. WPS Office is free to download, so you have nothing to lose!

• 1. How to change margins in Excel
• 2. How to Convert Word to PDF [For Students]
• 3. How to Insert Signatures in Word [For Students]
• 4. How to Check Word Count for Your Essays in Word [For Students]
• 5. How to Insert Degree Symbol in Word [For Students]
• 6. How to set the margins in WPS Writer

15 years of office industry experience, tech lover and copywriter. Follow me for product reviews, comparisons, and recommendations for new apps and software.