research chapter 4 interpretation

How To Write The Results/Findings Chapter

For quantitative studies (dissertations & theses).

By: Derek Jansen (MBA) | Expert Reviewed By: Kerryn Warren (PhD) | July 2021

So, you’ve completed your quantitative data analysis and it’s time to report on your findings. But where do you start? In this post, we’ll walk you through the results chapter (also called the findings or analysis chapter), step by step, so that you can craft this section of your dissertation or thesis with confidence. If you’re looking for information regarding the results chapter for qualitative studies, you can find that here .

Overview: Quantitative Results Chapter

• What exactly the results chapter is
• What you need to include in your chapter
• How to structure the chapter
• Tips and tricks for writing a top-notch chapter
• Free results chapter template

What exactly is the results chapter?

The results chapter (also referred to as the findings or analysis chapter) is one of the most important chapters of your dissertation or thesis because it shows the reader what you’ve found in terms of the quantitative data you’ve collected. It presents the data using a clear text narrative, supported by tables, graphs and charts. In doing so, it also highlights any potential issues (such as outliers or unusual findings) you’ve come across.

But how’s that different from the discussion chapter?

Well, in the results chapter, you only present your statistical findings. Only the numbers, so to speak – no more, no less. Contrasted to this, in the discussion chapter , you interpret your findings and link them to prior research (i.e. your literature review), as well as your research objectives and research questions . In other words, the results chapter presents and describes the data, while the discussion chapter interprets the data.

Let’s look at an example.

In your results chapter, you may have a plot that shows how respondents to a survey  responded: the numbers of respondents per category, for instance. You may also state whether this supports a hypothesis by using a p-value from a statistical test. But it is only in the discussion chapter where you will say why this is relevant or how it compares with the literature or the broader picture. So, in your results chapter, make sure that you don’t present anything other than the hard facts – this is not the place for subjectivity.

It’s worth mentioning that some universities prefer you to combine the results and discussion chapters. Even so, it is good practice to separate the results and discussion elements within the chapter, as this ensures your findings are fully described. Typically, though, the results and discussion chapters are split up in quantitative studies. If you’re unsure, chat with your research supervisor or chair to find out what their preference is.

What should you include in the results chapter?

Following your analysis, it’s likely you’ll have far more data than are necessary to include in your chapter. In all likelihood, you’ll have a mountain of SPSS or R output data, and it’s your job to decide what’s most relevant. You’ll need to cut through the noise and focus on the data that matters.

This doesn’t mean that those analyses were a waste of time – on the contrary, those analyses ensure that you have a good understanding of your dataset and how to interpret it. However, that doesn’t mean your reader or examiner needs to see the 165 histograms you created! Relevance is key.

How do I decide what’s relevant?

At this point, it can be difficult to strike a balance between what is and isn’t important. But the most important thing is to ensure your results reflect and align with the purpose of your study .  So, you need to revisit your research aims, objectives and research questions and use these as a litmus test for relevance. Make sure that you refer back to these constantly when writing up your chapter so that you stay on track.

As a general guide, your results chapter will typically include the following:

• Some demographic data about your sample
• Reliability tests (if you used measurement scales)
• Descriptive statistics
• Inferential statistics (if your research objectives and questions require these)
• Hypothesis tests (again, if your research objectives and questions require these)

We’ll discuss each of these points in more detail in the next section.

Importantly, your results chapter needs to lay the foundation for your discussion chapter . This means that, in your results chapter, you need to include all the data that you will use as the basis for your interpretation in the discussion chapter.

For example, if you plan to highlight the strong relationship between Variable X and Variable Y in your discussion chapter, you need to present the respective analysis in your results chapter – perhaps a correlation or regression analysis.

Need a helping hand?

How do I write the results chapter?

There are multiple steps involved in writing up the results chapter for your quantitative research. The exact number of steps applicable to you will vary from study to study and will depend on the nature of the research aims, objectives and research questions . However, we’ll outline the generic steps below.

Step 1 – Revisit your research questions

The first step in writing your results chapter is to revisit your research objectives and research questions . These will be (or at least, should be!) the driving force behind your results and discussion chapters, so you need to review them and then ask yourself which statistical analyses and tests (from your mountain of data) would specifically help you address these . For each research objective and research question, list the specific piece (or pieces) of analysis that address it.

At this stage, it’s also useful to think about the key points that you want to raise in your discussion chapter and note these down so that you have a clear reminder of which data points and analyses you want to highlight in the results chapter. Again, list your points and then list the specific piece of analysis that addresses each point. 

Next, you should draw up a rough outline of how you plan to structure your chapter . Which analyses and statistical tests will you present and in what order? We’ll discuss the “standard structure” in more detail later, but it’s worth mentioning now that it’s always useful to draw up a rough outline before you start writing (this advice applies to any chapter).

Step 2 – Craft an overview introduction

As with all chapters in your dissertation or thesis, you should start your quantitative results chapter by providing a brief overview of what you’ll do in the chapter and why . For example, you’d explain that you will start by presenting demographic data to understand the representativeness of the sample, before moving onto X, Y and Z.

This section shouldn’t be lengthy – a paragraph or two maximum. Also, it’s a good idea to weave the research questions into this section so that there’s a golden thread that runs through the document.

Step 3 – Present the sample demographic data

The first set of data that you’ll present is an overview of the sample demographics – in other words, the demographics of your respondents.

For example:

• What age range are they?
• How is gender distributed?
• How is ethnicity distributed?
• What areas do the participants live in?

The purpose of this is to assess how representative the sample is of the broader population. This is important for the sake of the generalisability of the results. If your sample is not representative of the population, you will not be able to generalise your findings. This is not necessarily the end of the world, but it is a limitation you’ll need to acknowledge.

Of course, to make this representativeness assessment, you’ll need to have a clear view of the demographics of the population. So, make sure that you design your survey to capture the correct demographic information that you will compare your sample to.

But what if I’m not interested in generalisability?

Well, even if your purpose is not necessarily to extrapolate your findings to the broader population, understanding your sample will allow you to interpret your findings appropriately, considering who responded. In other words, it will help you contextualise your findings . For example, if 80% of your sample was aged over 65, this may be a significant contextual factor to consider when interpreting the data. Therefore, it’s important to understand and present the demographic data.

 Step 4 – Review composite measures and the data “shape”.

Before you undertake any statistical analysis, you’ll need to do some checks to ensure that your data are suitable for the analysis methods and techniques you plan to use. If you try to analyse data that doesn’t meet the assumptions of a specific statistical technique, your results will be largely meaningless. Therefore, you may need to show that the methods and techniques you’ll use are “allowed”.

Most commonly, there are two areas you need to pay attention to:

#1: Composite measures

The first is when you have multiple scale-based measures that combine to capture one construct – this is called a composite measure .  For example, you may have four Likert scale-based measures that (should) all measure the same thing, but in different ways. In other words, in a survey, these four scales should all receive similar ratings. This is called “ internal consistency ”.

Internal consistency is not guaranteed though (especially if you developed the measures yourself), so you need to assess the reliability of each composite measure using a test. Typically, Cronbach’s Alpha is a common test used to assess internal consistency – i.e., to show that the items you’re combining are more or less saying the same thing. A high alpha score means that your measure is internally consistent. A low alpha score means you may need to consider scrapping one or more of the measures.

#2: Data shape

The second matter that you should address early on in your results chapter is data shape. In other words, you need to assess whether the data in your set are symmetrical (i.e. normally distributed) or not, as this will directly impact what type of analyses you can use. For many common inferential tests such as T-tests or ANOVAs (we’ll discuss these a bit later), your data needs to be normally distributed. If it’s not, you’ll need to adjust your strategy and use alternative tests.

To assess the shape of the data, you’ll usually assess a variety of descriptive statistics (such as the mean, median and skewness), which is what we’ll look at next.

Step 5 – Present the descriptive statistics

Now that you’ve laid the foundation by discussing the representativeness of your sample, as well as the reliability of your measures and the shape of your data, you can get started with the actual statistical analysis. The first step is to present the descriptive statistics for your variables.

For scaled data, this usually includes statistics such as:

• The mean – this is simply the mathematical average of a range of numbers.
• The median – this is the midpoint in a range of numbers when the numbers are arranged in order.
• The mode – this is the most commonly repeated number in the data set.
• Standard deviation – this metric indicates how dispersed a range of numbers is. In other words, how close all the numbers are to the mean (the average).
• Skewness – this indicates how symmetrical a range of numbers is. In other words, do they tend to cluster into a smooth bell curve shape in the middle of the graph (this is called a normal or parametric distribution), or do they lean to the left or right (this is called a non-normal or non-parametric distribution).
• Kurtosis – this metric indicates whether the data are heavily or lightly-tailed, relative to the normal distribution. In other words, how peaked or flat the distribution is.

A large table that indicates all the above for multiple variables can be a very effective way to present your data economically. You can also use colour coding to help make the data more easily digestible.

For categorical data, where you show the percentage of people who chose or fit into a category, for instance, you can either just plain describe the percentages or numbers of people who responded to something or use graphs and charts (such as bar graphs and pie charts) to present your data in this section of the chapter.

When using figures, make sure that you label them simply and clearly , so that your reader can easily understand them. There’s nothing more frustrating than a graph that’s missing axis labels! Keep in mind that although you’ll be presenting charts and graphs, your text content needs to present a clear narrative that can stand on its own. In other words, don’t rely purely on your figures and tables to convey your key points: highlight the crucial trends and values in the text. Figures and tables should complement the writing, not carry it .

Depending on your research aims, objectives and research questions, you may stop your analysis at this point (i.e. descriptive statistics). However, if your study requires inferential statistics, then it’s time to deep dive into those .

Step 6 – Present the inferential statistics

Inferential statistics are used to make generalisations about a population , whereas descriptive statistics focus purely on the sample . Inferential statistical techniques, broadly speaking, can be broken down into two groups .

First, there are those that compare measurements between groups , such as t-tests (which measure differences between two groups) and ANOVAs (which measure differences between multiple groups). Second, there are techniques that assess the relationships between variables , such as correlation analysis and regression analysis. Within each of these, some tests can be used for normally distributed (parametric) data and some tests are designed specifically for use on non-parametric data.

There are a seemingly endless number of tests that you can use to crunch your data, so it’s easy to run down a rabbit hole and end up with piles of test data. Ultimately, the most important thing is to make sure that you adopt the tests and techniques that allow you to achieve your research objectives and answer your research questions .

In this section of the results chapter, you should try to make use of figures and visual components as effectively as possible. For example, if you present a correlation table, use colour coding to highlight the significance of the correlation values, or scatterplots to visually demonstrate what the trend is. The easier you make it for your reader to digest your findings, the more effectively you’ll be able to make your arguments in the next chapter.

Step 7 – Test your hypotheses

If your study requires it, the next stage is hypothesis testing. A hypothesis is a statement , often indicating a difference between groups or relationship between variables, that can be supported or rejected by a statistical test. However, not all studies will involve hypotheses (again, it depends on the research objectives), so don’t feel like you “must” present and test hypotheses just because you’re undertaking quantitative research.

The basic process for hypothesis testing is as follows:

• Specify your null hypothesis (for example, “The chemical psilocybin has no effect on time perception).
• Specify your alternative hypothesis (e.g., “The chemical psilocybin has an effect on time perception)
• Set your significance level (this is usually 0.05)
• Calculate your statistics and find your p-value (e.g., p=0.01)
• Draw your conclusions (e.g., “The chemical psilocybin does have an effect on time perception”)

Finally, if the aim of your study is to develop and test a conceptual framework , this is the time to present it, following the testing of your hypotheses. While you don’t need to develop or discuss these findings further in the results chapter, indicating whether the tests (and their p-values) support or reject the hypotheses is crucial.

Step 8 – Provide a chapter summary

To wrap up your results chapter and transition to the discussion chapter, you should provide a brief summary of the key findings . “Brief” is the keyword here – much like the chapter introduction, this shouldn’t be lengthy – a paragraph or two maximum. Highlight the findings most relevant to your research objectives and research questions, and wrap it up.

Some final thoughts, tips and tricks

Now that you’ve got the essentials down, here are a few tips and tricks to make your quantitative results chapter shine:

• When writing your results chapter, report your findings in the past tense . You’re talking about what you’ve found in your data, not what you are currently looking for or trying to find.
• Structure your results chapter systematically and sequentially . If you had two experiments where findings from the one generated inputs into the other, report on them in order.
• Make your own tables and graphs rather than copying and pasting them from statistical analysis programmes like SPSS. Check out the DataIsBeautiful reddit for some inspiration.
• Once you’re done writing, review your work to make sure that you have provided enough information to answer your research questions , but also that you didn’t include superfluous information.

If you’ve got any questions about writing up the quantitative results chapter, please leave a comment below. If you’d like 1-on-1 assistance with your quantitative analysis and discussion, check out our hands-on coaching service , or book a free consultation with a friendly coach.

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

Thank you. I will try my best to write my results.

Awesome content 👏🏾

this was great explaination

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

blog @ precision

Presenting your qualitative analysis findings: tables to include in chapter 4.

The earliest stages of developing a doctoral dissertation—most specifically the topic development  and literature review  stages—require that you immerse yourself in a ton of existing research related to your potential topic. If you have begun writing your dissertation proposal, you have undoubtedly reviewed countless results and findings sections of studies in order to help gain an understanding of what is currently known about your topic. 

In this process, we’re guessing that you observed a distinct pattern: Results sections are full of tables. Indeed, the results chapter for your own dissertation will need to be similarly packed with tables. So, if you’re preparing to write up the results of your statistical analysis or qualitative analysis, it will probably help to review your APA editing  manual to brush up on your table formatting skills. But, aside from formatting, how should you develop the tables in your results chapter?

In quantitative studies, tables are a handy way of presenting the variety of statistical analysis results in a form that readers can easily process. You’ve probably noticed that quantitative studies present descriptive results like mean, mode, range, standard deviation, etc., as well the inferential results that indicate whether significant relationships or differences were found through the statistical analysis . These are pretty standard tables that you probably learned about in your pre-dissertation statistics courses.

But, what if you are conducting qualitative analysis? What tables are appropriate for this type of study? This is a question we hear often from our dissertation assistance  clients, and with good reason. University guidelines for results chapters often contain vague instructions that guide you to include “appropriate tables” without specifying what exactly those are. To help clarify on this point, we asked our qualitative analysis experts to share their recommendations for tables to include in your Chapter 4.

Demographics Tables

As with studies using quantitative methods , presenting an overview of your sample demographics is useful in studies that use qualitative research methods. The standard demographics table in a quantitative study provides aggregate information for what are often large samples. In other words, such tables present totals and percentages for demographic categories within the sample that are relevant to the study (e.g., age, gender, job title). 

If conducting qualitative research  for your dissertation, however, you will use a smaller sample and obtain richer data from each participant than in quantitative studies. To enhance thick description—a dimension of trustworthiness—it will help to present sample demographics in a table that includes information on each participant. Remember that ethical standards of research require that all participant information be deidentified, so use participant identification numbers or pseudonyms for each participant, and do not present any personal information that would allow others to identify the participant (Blignault & Ritchie, 2009). Table 1 provides participant demographics for a hypothetical qualitative research study exploring the perspectives of persons who were formerly homeless regarding their experiences of transitioning into stable housing and obtaining employment.

Participant Demographics

Tables to Illustrate Initial Codes

Most of our dissertation consulting clients who are conducting qualitative research choose a form of thematic analysis . Qualitative analysis to identify themes in the data typically involves a progression from (a) identifying surface-level codes to (b) developing themes by combining codes based on shared similarities. As this process is inherently subjective, it is important that readers be able to evaluate the correspondence between the data and your findings (Anfara et al., 2002). This supports confirmability, another dimension of trustworthiness .

A great way to illustrate the trustworthiness of your qualitative analysis is to create a table that displays quotes from the data that exemplify each of your initial codes. Providing a sample quote for each of your codes can help the reader to assess whether your coding was faithful to the meanings in the data, and it can also help to create clarity about each code’s meaning and bring the voices of your participants into your work (Blignault & Ritchie, 2009).

Table 2 is an example of how you might present information regarding initial codes. Depending on your preference or your dissertation committee’s preference, you might also present percentages of the sample that expressed each code. Another common piece of information to include is which actual participants expressed each code. Note that if your qualitative analysis yields a high volume of codes, it may be appropriate to present the table as an appendix.

Initial Codes

Tables to Present the Groups of Codes That Form Each Theme

As noted previously, most of our dissertation assistance clients use a thematic analysis approach, which involves multiple phases of qualitative analysis  that eventually result in themes that answer the dissertation’s research questions. After initial coding is completed, the analysis process involves (a) examining what different codes have in common and then (b) grouping similar codes together in ways that are meaningful given your research questions. In other words, the common threads that you identify across multiple codes become the theme that holds them all together—and that theme answers one of your research questions.

As with initial coding, grouping codes together into themes involves your own subjective interpretations, even when aided by qualitative analysis software such as NVivo  or MAXQDA. In fact, our dissertation assistance clients are often surprised to learn that qualitative analysis software does not complete the analysis in the same ways that statistical analysis software such as SPSS does. While statistical analysis software completes the computations for you, qualitative analysis software does not have such analysis capabilities. Software such as NVivo provides a set of organizational tools that make the qualitative analysis far more convenient, but the analysis itself is still a very human process (Burnard et al., 2008).

Because of the subjective nature of qualitative analysis, it is important to show the underlying logic behind your thematic analysis in tables—such tables help readers to assess the trustworthiness of your analysis. Table 3 provides an example of how to present the codes that were grouped together to create themes, and you can modify the specifics of the table based on your preferences or your dissertation committee’s requirements. For example, this type of table might be presented to illustrate the codes associated with themes that answer each research question. 

Grouping of Initial Codes to Form Themes

Tables to Illustrate the Themes That Answer Each Research Question

Creating alignment throughout your dissertation is an important objective, and to maintain alignment in your results chapter, the themes you present must clearly answer your research questions. Conducting qualitative analysis is an in-depth process of immersion in the data, and many of our dissertation consulting  clients have shared that it’s easy to lose your direction during the process. So, it is important to stay focused on your research questions during the qualitative analysis and also to show the reader exactly which themes—and subthemes, as applicable—answered each of the research questions.

Below, Table 4 provides an example of how to display the thematic findings of your study in table form. Depending on your dissertation committee’s preference or your own, you might present all research questions and all themes and subthemes in a single table. Or, you might provide separate tables to introduce the themes for each research question as you progress through your presentation of the findings in the chapter.

Emergent Themes and Research Questions

Bonus Tip! Figures to Spice Up Your Results

Although dissertation committees most often wish to see tables such as the above in qualitative results chapters, some also like to see figures that illustrate the data. Qualitative software packages such as NVivo offer many options for visualizing your data, such as mind maps, concept maps, charts, and cluster diagrams. A common choice for this type of figure among our dissertation assistance clients is a tree diagram, which shows the connections between specified words and the words or phrases that participants shared most often in the same context. Another common choice of figure is the word cloud, as depicted in Figure 1. The word cloud simply reflects frequencies of words in the data, which may provide an indication of the importance of related concepts for the participants.

As you move forward with your qualitative analysis and development of your results chapter, we hope that this brief overview of useful tables and figures helps you to decide on an ideal presentation to showcase the trustworthiness your findings. Completing a rigorous qualitative analysis for your dissertation requires many hours of careful interpretation of your data, and your end product should be a rich and detailed results presentation that you can be proud of. Reach out if we can help  in any way, as our dissertation coaches would be thrilled to assist as you move through this exciting stage of your dissertation journey!

Anfara Jr., V. A., Brown, K. M., & Mangione, T. L. (2002). Qualitative analysis on stage: Making the research process more public.  Educational Researcher ,  31 (7), 28-38. https://doi.org/10.3102/0013189X031007028

Blignault, I., & Ritchie, J. (2009). Revealing the wood and the trees: Reporting qualitative research.  Health Promotion Journal of Australia ,  20 (2), 140-145. https://doi.org/10.1071/HE09140

Burnard, P., Gill, P., Stewart, K., Treasure, E., & Chadwick, B. (2008). Analysing and presenting qualitative data.  British Dental Journal ,  204 (8), 429-432. https://doi.org/10.1038/sj.bdj.2008.292

Academia.edu no longer supports Internet Explorer.

To browse Academia.edu and the wider internet faster and more securely, please take a few seconds to  upgrade your browser .

Enter the email address you signed up with and we'll email you a reset link.

• We're Hiring!
• Help Center

Chapter 4 Presentation, Analysis, and Interpretation of Data

Related Papers

The analysis and interpretation of data about wearing high heels for female students of Ligao community college.

James Joel Delos Reyes

The analysis and interpretation of data about wearing high heels for female students of Ligao community college. To complete this study properly, it is necessary to analyze the data collected in order to answer the research questions. Data is interpreted in a descriptive form. This chapter comprises the analysis, presentation and interpretation of the findings resulting from this study. The analysis and interpretation of data is carried out in two phases. The first part, which is based on the results of the questionnaire, deals with a qualitative analysis of data. The second, which is based on quantitative analysis. The unit of analysis is the major entity that the researcher going to analyze in the study. It is not 'what' or 'who' that is being studied. Researchers were collecting the data or information from the following female student for the completion of the study 100 questionnaires were distributed, only 80 was retrieve, some students did not completely answer the given data, few of them with a lot of missing data, while the remaining students answer well on the given questionnaire. The researchers use table in order to easily identify the data and interpret it according to the response of the following female students. In order to get the percentage of the following data we use the formula P=the value or the frequency/ by total respondent, (100) multiply (100). Table 1.

Eğitimde Kuram ve Uygulama

Tamer Kutluca

1.Uluslararası İnsan Çalışmaları Kongresi (ICHUS2018)

ARİF DURĞUN , Burhanettin Uysal

Giriş ve Amaç: Bu çalışma ile hastanelerde çalışan sağlık meslek mensuplarının mesleki ve örgütsel bağlılık düzeyleri arasındaki ilişkiyi incelemek ve daha önce hemşireler üzerinde yapılan araştırmalardan yola çıkarak sağlık meslek mensupları üzerinde uygulayarak literatüre veri kazandırılmak amaçlanmaktadır. Gereç ve Yöntem: Araştırma, Bolu ili İzzet Baysal Üniversitesi İzzet Baysal Eğitim ve Araştırma Hastanesinde sağlık meslek mensupları üzerinde 2018 yılı Ekim-Kasım ayında yapılmıştır. Araştırmanın evrenini tüm sağlık meslek mensupları oluşturmaktadır. Araştırma etik kurul onayı alındıktan sonra hastanede görev yapan 684 sağlık meslek mensubundan tesadüfî örnekleme bağlı kalarak %95 güven aralığında %5 hata payı ile 247 çalışan üzerinde planlandı ancak araştırmanın sınırlılıklarından dolayı 201 çalışan üzerinde uygulandı. Anketlerden elde edilen veriler SPSS (Statistical Package for the Social Sciences) programı ile analiz edildi. Ayrıca sosyo-demografik özelliklere göre sağlık meslek mensupları arasında önemli farklılıklar gösterip göstermediğini analiz etmek için t testi, tek yönlü varyans analizi, ölçeklerin boyutları arasında korelasyon ve regresyon analizleri yapıldı. Her iki ölçeğe de Lisrel programı ile doğrulayıcı faktör analizi uygulandı. Bulgular ve Sonuç: Araştırmadan elde edilen bulgulara göre örgütsel bağlılık ve mesleki bağlılık güvenirlik analizi Cronbach’s alpha değerleri yüksek ve çok yüksek bulundu. Demografik faktörlerle ölçeklerin toplam puanları ile yapılan t-testi ve tek yönlü anova sonuçlarına göre cinsiyet, medeni durum değişkenleri açısından mesleki bağlılık ve örgütsel bağlılık anlamlı farklılaşmamaktadır. Eğitim değişkenine göre mesleki bağlılığın mesleki üyeliği sürdürme alt boyutunda anlamlı farklılaştığı, farklılığın doktora-lisans ve doktora-lise arasından kaynaklandığı bulundu. Unvan değişkenine göre çaba gösterme alt boyutunda anlamlı farklılaştı. Çalışma saatleri değişkeninde ise her iki ölçekte de anlamlı farklılık bulundu. Boyutlar arasında pozitif yönlü anlamlı ilişkiler bulundu (p<0,01;0,05). Regresyon analizine göre mesleki bağlılık, örgütsel bağlılığı etkilemektedir (p<0,01; R²:0,108;B=0,328).

bilal yaman

Bu araştırmanın amacı, gençlik merkezi faaliyetlerine katılan bireylerin bazı değişkenlere göre serbest zaman tatmin düzeylerinin incelenmesidir. Evreni Türkiye İç Anadolu bölgesindeki Gençlik merkezine üye gençler oluşturmaktadır. Araştırma grubunu ise bu bölgede bulunan 11 ildeki Gençlik merkezlerine üye olan yaşları 13-27 arasında değişen 906 birey oluşturmaktadır. Araştırma verileri toplanmasında, serbest zaman tatmin düzeylerini belirlemek amacıyla Beard ve Ragheb&#39; in (1980) geliştirdikleri, Karlı ve arkadaşlarının (2008) yılında geçerlilik güvenilirlik çalışmasını yaparak Türkçe literatüre kazandırdıkları 39 sorudan ve altı alt boyuttan oluşan iç tutarlılık (Chronbach Alfa) katsayısı 92 olarak bulunmuş Serbest Zaman Tatmin Ölçeği (Leisure Satisfaction Scale/LSS) kullanılmıştır. Verilerin analizinde değişkenlerin gruplara göre dağılımları incelenmiş, dağılımların normalliği ve varyansların homojenliği değerlendirilerek dağılımların parametrik özellik sergilemediği sonucuna ...

Chris Isokpenhi

abdurrahman kırtepe

Mehari Tesfai

International Journal of Anatolia Sport Sciences

serap çolak

DergiPark (Istanbul University)

mehmet Atlar

michaelroy yabes

RELATED PAPERS

Ikhsan Dwitama

vipin raichand

The American Journal of Pathology

Kai Matuschewski

International Journal of Molecular Sciences

Oriental Pharmacy and Experimental Medicine

AFROZA TAHAMINA

IJARESM Publication

pamulaparthy varun

Procedia Environmental Sciences

Zhan-Ming Chen

Han'gug jaweon sig'mul haghoeji

Joanna House

Res Militaris

richa rastogi

Pakistan Journal of Medicine and Dentistry

Reeta Kumari

Aquatic Microbial Ecology

Turk. J. Biol

Dr. Mehmet Alma

Journal of the Egyptian Mathematical Society

Heba Mohammed

BMC Proceedings

Asep Edi Suryadi

International Journal of Environmental Analytical Chemistry

George Zachariadis

Current Trends in Natural Sciences

Daniela Giosanu

Stefano Versari

The Journal of Urology

Niels-erik Jacobsen

Anesthesia &amp; Analgesia

Mohan Tanniru

•   We're Hiring!
•   Help Center
• Find new research papers in:
• Health Sciences
• Earth Sciences
• Cognitive Science
• Mathematics
• Computer Science
• Academia ©2024

• Chapter 4: Home
• Qualtrics Survey Tool
• Statistics Help This link opens in a new window
• Statistics and APA Format This link opens in a new window

Analysis and Coding Example: Qualitative Data

• Trustworthiness of Qualitative Data
• Hypothesis Testing This link opens in a new window

Jump to DSE Guide

The following is an example of how to engage in a three step analytic process of coding, categorizing, and identifying themes within the data presented. Note that different researchers would come up with different results based on their specific research questions, literature review findings, and theoretical perspective.

There are many ways cited in the literature to analyze qualitative data. The specific analytic plan in this exercise involved a constant comparative (Glaser & Strauss, 1967) approach that included a three-step process of open coding, categorizing, and synthesizing themes. The constant comparative process involved thinking about how these comments were interrelated. Intertwined within this three step process, this example engages in content analysis techniques as described by Patton (1987) through which coherent and salient themes and patterns are identified throughout the data. This is reflected in the congruencies and incongruencies reflected in the memos and relational matrix.

Step 1: Open Coding

Codes for the qualitative data are created through a line by line analysis of the comments. Codes would be based on the research questions, literature review, and theoretical perspective articulated. Numbering the lines is helpful so that the researcher can make notes regarding which comments they might like to quote in their report.

It is also useful to include memos to remind yourself of what you were thinking and allow you to reflect on the initial interpretations as you engage in the next two analytic steps. In addition, memos will be a reminder of issues that need to be addressed if there is an opportunity for follow up data collection. This technique allows the researcher time to reflect on how his/her biases might affect the analysis. Using different colored text for memos makes it easy to differentiate thoughts from the data.

Many novice researchers forgo this step.  Rather, they move right into arranging the entire statements into the various categories that have been pre-identified. There are two problems with the process. First, since the categories have been listed open coding, it is unclear from where the categories have been derived. Rather, when a researcher uses the open coding process, he/she look at each line of text individually and without consideration for the others. This process of breaking the pieces down and then putting them back together through analysis ensures that the researcher consider all for the data equally and limits the bias that might introduced. In addition, if a researcher is coding interviews or other significant amounts of qualitative data it will likely become overwhelming as the researcher tries to organize and remember from which context each piece of data came.

Step 2: Categorizing

To categorize the codes developed in Step 1 , list the codes and group them by similarity.  Then, identify an appropriate label for each group. The following table reflects the result of this activity.

Step 3: Identification of Themes

In this step, review the categories as well as the memos to determine the themes that emerge.   In the discussion below, three themes emerged from the synthesis of the categories. Relevant quotes from the data are included that exemplify the essence of the themes.These can be used in the discussion of findings. The relational matrix demonstrates the pattern of thinking of the researcher as they engaged in this step in the analysis. This is similar to an axial coding strategy.

Note that this set of data is limited and leaves some questions in mind. In a well-developed study, this would just be a part of the data collected and there would be other data sets and/or opportunities to clarify/verify some of the interpretations made below.  In addition, since there is no literature review or theoretical statement, there are no reference points from which to draw interferences in the data. Some assumptions were made for the purposes of this demonstration in these areas.

T h eme 1:  Professional Standing

Individual participants have articulated issues related to their own professional position. They are concerned about what and when they will teach, their performance, and the respect/prestige that they have within the school. For example, they are concerned about both their physical environment and the steps that they have to take to ensure that they have the up to date tools that they need. They are also concerned that their efforts are being acknowledged, sometimes in relation to their peers and their beliefs that they are more effective.

Selected quotes:

• Some teachers are carrying the weight for other teachers. (demonstrates that they think that some of their peers are not qualified.)
• We need objective observations and feedback from the principal (demonstrates that they are looking for acknowledgement for their efforts.  Or this could be interpreted as a belief that their peers who are less qualified should be acknowledged).
• There is a lack of support for individual teachers

Theme 2:  Group Dynamics and Collegiality

Rationale: There are groups or clicks that have formed. This seems to be the basis for some of the conflict.  This conflict is closely related to the status and professional standing themes. This theme however, has more to do with the group issues while the first theme is an individual perspective. Some teachers and/or subjects are seen as more prestigious than others.  Some of this is related to longevity. This creates jealously and inhibits collegiality. This affects peer-interaction, instruction, and communication.

• Grade level teams work against each other rather than together.
• Each team of teachers has stereotypes about the other teams.
• There is a division between the old and new teachers

Theme 3:  Leadership Issues

Rationale: There seems to be a lack of leadership and shared understanding of the general direction in which the school will go. This is also reflected in a lack of two way communications.  There doesn’t seem to be information being offered by the leadership of the school, nor does there seem to be an opportunity for individuals to share their thoughts, let alone decision making. There seems to be a lack of intervention in the conflict from leadership.

• Decisions are made on inaccurate information.
• We need consistent decisions about school rules

Glaser, B.G., & Strauss, A.  (1967).   The discovery of grounded theory:  Strategies for qualitative research . Chicago, IL: Aldine.

Patton, M. Q.  (1987).   How to use qualitative methods in evaluation .  Newbury Park, CA:  Sage Publications.

• << Previous: Statistics and APA Format
• Next: Trustworthiness of Qualitative Data >>
• Last Updated: Apr 19, 2024 3:09 PM
• URL: https://resources.nu.edu/c.php?g=1007180

© Copyright 2024 National University. All Rights Reserved.

Privacy Policy | Consumer Information