municipal solid waste management nptel assignment answers 2022

Advertisement

Municipal solid waste management in Russia: potentials of climate change mitigation

• Original Paper
• Open access
• Published: 29 July 2021
• Volume 19 , pages 27–42, ( 2022 )

Cite this article

You have full access to this open access article

• C. Wünsch   ORCID: orcid.org/0000-0002-3839-6982 1 , 2 &
• A. Tsybina 3  

4579 Accesses

2 Citations

23 Altmetric

Explore all metrics

The goal of this study was to assess the impact of the introduction of various waste management methods on the amount of greenhouse gas emissions from these activities. The assessment was carried out on the example of the Russian waste management sector. For this purpose, three scenarios had been elaborated for the development of the Russian waste management sector: Basic scenario, Reactive scenario and Innovative scenario. For each of the scenarios, the amount of greenhouse gas emissions generated during waste management was calculated. The calculation was based on the 2006 Intergovernmental Panel on Climate Change Guidelines for National Greenhouse Gas Inventories. The results of the greenhouse gas net emissions calculation are as follows: 64 Mt CO 2 -eq./a for the basic scenario, 12.8 Mt CO 2 -eq./a for the reactive scenario, and 3.7 Mt CO 2 -eq./a for the innovative scenario. An assessment was made of the impact of the introduction of various waste treatment technologies on the amounts of greenhouse gas emissions generated in the waste management sector. An important factor influencing the reduction in greenhouse gas emissions from landfills is the recovery and thermal utilization of 60% of the generated landfill gas. The introduction of a separate collection system that allows to separately collect 20% of the total amount of generated municipal solid waste along with twofold increase in the share of incinerated waste leads to a more than threefold reduction in total greenhouse gas emissions from the waste management sector.

Similar content being viewed by others

Greenhouse gas emissions and cost assessments of municipal solid waste treatment and final disposal in maputo city.

Leticia Sarmento dos Muchangos, Akihiro Tokai & Atsuko Hanashima

Toward sustainable waste management: estimating emissions from alternative practices in Gulf Cooperation Council countries

A. Alsulaili, F. Alshamali & A. Aldabbous

The analysis of electricity production and greenhouse-gas emission reduction from municipal solid waste sector in Oman

W. A. Qazi & M. F. M. Abushammala

Avoid common mistakes on your manuscript.

Introduction

Population growth, urbanization and changing life style have resulted in increased amounts of generated solid waste, which poses serious challenges for many cities and authorities around the world (Abu Qdais et al. 2019 ; Chen 2018 ; Dedinec et al. 2015 ). In 2011, world cities generated about 1.3 Gt of solid waste; this amount is expected to increase to 2.2 Gt by 2025 (Hoornweg and Bhada-Tata 2012 ). Unless properly managed on a national level, solid waste causes several environmental and public health problems, which is adversely reflected on the economic development of a country (Abu Qdais 2007 ; Kaza et al. 2018 ).

One of the important environmental impact of the waste management sector are the generated greenhouse gas (GHG) emissions. These emissions come mostly from the release of methane from organic waste decomposition in landfills (Wuensch and Kocina 2019 ). The waste management sector is responsible for 1.6 Gt carbon dioxide equivalents (CO 2 -eq.) of the global GHG direct anthropogenic emissions per year (Fischedick et al. 2014 ), which accounts for approx. 4% of the global GHG emissions (Papageorgiou et al. 2009 ; Vergara and Tchobanoglous 2012 ). The disposal of municipal solid waste (MSW) contributes to 0.67 Gt CO 2 -eq./a worldwide (Fischedick et al. 2014 ), which is approx. 1.4% of the global GHG emissions. Per capita emissions in developed countries are estimated to be about 500 kg CO 2 -eq./a (Wuensch and Kocina 2019 ), while in the developing and emerging countries, it is around 100 kg CO 2 -eq./a per person. This low contribution of waste management sector comparing to other sectors of the economy, such as energy and transportation, might be the reason for the small amount of research that aims to study GHG emissions from the waste management sector (Chung et al. 2018 ).

However, it is important to consider that the mitigation of GHG emissions from waste management sector is relatively simple and cost-effective as compared to other sectors of the economy. Several studies proved that separate waste collection and composting of biowaste as well as landfilling with landfill gas recovery is currently found to be one of the most effective and economically sound GHG emissions mitigation options (Chen 2018 ; EI-Fadel and Sbayti 2000 ; Yedla and Sindhu 2016 ; Yılmaz and Abdulvahitoğlu 2019 ). Metz et al. 2001 estimated that 75% of the savings of methane recovered from landfills can be achieved at net negative direct cost, and 25% at cost of about 20 US$/Mg CO 2 -eq./a. In any country of the world, the potential of the waste management sector is not yet fully utilized; the implementation of relatively simple and inexpensive waste treatment technologies might contribute to national GHG mitigation goals and convert the sector from a net emitter into a net reducer of GHG emissions (Crawford et al. 2009 ; Voigt et al. 2015 ; Wuensch and Simon 2017 ).

While there are many well-established solutions and technologies for the reduction in GHG emitted from the waste sector, there is no universal set of options that suits all the countries. When thinking to adapt certain solutions of GHG mitigation, it is important to take into account local circumstances such as waste quantities and composition, available infrastructure, economic resources and climate (Crawford et al. 2009 ).

It is expedient to assess how the introduction of modern waste management methods affects the amount of GHG emissions from the waste management process by the example of those countries in which the waste management sector is undergoing reform. These countries include the Russian Federation, where the values of targets for the waste management industry until 2030 are legally established (Government of the Russian Federation 2018 ). In addition, on February 8, 2021, Russia issued a Presidential Decree “On Measures to Implement State Scientific and Technical Policy in the Field of Ecology and Climate,” which prescribes the creation of a Federal Program for the Creation and Implementation of Science-Intensive Technologies to Reduce Greenhouse Gas Emissions (Decree of the President of the Russian Federation 2021 ).

The goal of this study was to quantify the impact of the introduction of various modern waste treatment methods on the volume of GHG emissions from the waste management sector using the example of Russia. To achieve this goal, the following objectives were set and solved:

Elaborate scenarios for the development of the waste management industry, based on the established Industry Development Strategy for the period up to 2030 (Government of the Russian Federation 2018 )

Determine the weighted average morphological composition of MSW;

Select emission factors for various waste treatment methods;

Calculate GHG emissions under each scenario and analyze the calculation results.

The study was conducted from November 2019 to May 2020; the text was updated in March 2021 in connection with the changed situation, as climate change issues began to play an important role on the agenda in Russia. The study and its calculations are theoretical in nature and did not involve experimental research. It was carried out by the authors at their place of work—in Germany (Technische Universität Dresden, Merseburg University of Applied Sciences) and in Russia (Perm National Research Polytechnic University).

Greenhouse gas emissions related to municipal solid waste management sector in Russia

According to the State Report on the Status of Environmental Protection of the Russian Federation of 2018 (Ministry of Natural Resources and Ecology of the Russian Federation 2019 ), the volume of generated MSW has increased by 17% from 235.4 to 275.4 m 3 (49.9 to 58.4 Mt) during the time period 2010 to 2018. With approx. 147 million inhabitants, the annual per capita generation rate is about 400 kg. Until now, MSW management in Russia has been disposal driven. More than 90% of MSW generated is transported to landfills and open dump sites; 30% of the landfills do not meet sanitary requirements (Korobova et al. 2014 ; Tulokhonova and Ulanova 2013 ). According to the State Register of the Waste Disposal Facilities in Russia, there were 1,038 MSW landfills and 2,275 unregistered dump sites at the end of 2018 (Rosprirodnadzor 2019 ). Such waste management practices are neither safe nor sustainable (Fedotkina et al. 2019 ), as they pose high public health and environmental risks and lead to the loss of valuable recyclable materials such as paper, glass, metals and plastics which account for an annual amount of about 15 Mt (Korobova et al. 2014 ).

According to the United Nations Framework Convention on Climate Change (UNFCCC) requirements, the signatory parties of the convention need to prepare and submit national communication reports that document GHG emissions and sinks in each country by conducting an inventory based on Intergovernmental Panel on Climate Change (IPCC) guidelines (UNFCCC 2006 ). Being the fourth biggest global emitter of GHG emissions, Russia submitted its latest National Inventory Report (NIR) to UNFCCC in April 2019. The report documents national GHG emissions by source and removals by sink (Russian Federation 2019 ). The total emissions had been decreased from 3.2 Gt in 1990 to about 2.2 Gt of CO 2 -eq. in 2017, which implies 30% reduction over a period of 27 years. At the same time, the emissions from the disposal of solid waste increased from 33 Mt in 1990 by more than 100% to 69 Mt CO 2 -eq. in 2017. In terms of methane emissions, Russian solid waste disposal sector is the second largest emitter in the country and accounts for 18.1% of the total emitted methane mostly in the form of landfill gas, while the energy sector is responsible for 61.2% of methane emissions (Russian Federation 2019 ).

Landfill gas recovery from MSW landfills is not widely practiced in the Russian Federation. According to the statistics of the Russian Ministry of Natural Resources and Ecology, the share of landfill gas energy in the total renewable energy produced in Russia was 8.61%, 5.43%, 2.77% and 2.59% in 2011, 2012, 2013 and 2014, respectively (Arkharov et al. 2016 ). Different studies show that the potential of recovering energy from landfill gas in the Russian Federation is high (Arkharov et al. 2016 ; Sliusar and Armisheva 2013 ; Starostina et al. 2018 ; Volynkina et al. 2009 ).

Waste-to-energy technology is still in its infancy in Russia; the country is lagging in this area (Tugov 2013 ). Despite that, there is a great interest among the public as well as the private sector in the possibilities of the recovery of energy from MSW. In April 2014, the State Program “Energy Efficiency and Energy Development” was approved, which includes a subprogram on the development of renewable energy sources in the Russian Federation (Government of the Russian Federation 2014 ). In this program, MSW was considered as a source of renewable energy. Until the year 2017, there were only four waste incineration plants in Moscow region processing 655,000 Mg MSW per year, with only one incinerator recovering energy in form of heat and electricity (Dashieva 2017 ). In the nearest future, the construction of four additional incinerators in Moscow region and one in the city of Kazan is planned. The annual total combined capacity of the four new plants in Moscow will be about 2.8 Mt (Bioenergy International 2019 ). In the Kazan incinerator, 0.55 Mt of MSW will be treated annually, which eventually will allow ceasing of landfilling of solid waste in the Republic of Tatarstan (Bioenergy International 2019 ; Regnum 2017 ). The construction of these five new incineration plants is part of the Comprehensive Municipal Solid Waste Strategy adopted by the Russian government in 2013 (Plastinina et al. 2019 ). The focus of this strategy is the reduction in the amount of landfilled waste by creating an integrated management system and industrial recycling of waste.

Separate collection of MSW and the recycling of different waste fractions at the moment plays only a negligible role in the Russian Federation.

Materials and methods

Scenarios of the development of municipal solid waste management system.

To assess the current situation and the potential for reducing GHG emissions from the MSW management industry, three scenarios of the development of the Russian waste management system had been elaborated. The developed scenarios are based on the official statistics data on the amount of waste generated and treated, and also on the adopted legislative acts that determine the development directions of the Russian waste management system and set targets in these areas (Council for Strategic Development and National Projects 2018 ). That is why the developed scenarios include such measures to improve the waste management system as elimination of unauthorized dump sites, introduction of landfill gas collection and utilization systems at the landfills, incineration of waste with energy recovery, separate collection of waste, and recycling of utilizable waste fractions, and do not include other waste-to-energy technologies and waste treatment strategies contributing to climate change mitigation. Separate collection and treatment of biowaste is not applied in the national waste management strategy of the Russian Federation (Government of the Russian Federation 2018 ) and therefore was beyond the scope of the elaborated scenarios. For the purpose of the current study, three scenarios had been developed.

Scenario 1: BASIC (business as usual)

This scenario is based on the current waste management practices, under which 90% of the generated mixed MSW is disposed of on landfills and dump sites. According to the 6th National Communication Report of the Russian Federation to UNFCCC, the total MSW generated that found its way to managed landfills Footnote 1 was 49.209 Mt in 2009, while the amount of MSW disposed in unmanaged disposal sites (dumps) was 5.067 Mt. In 2017, the amount of MSW generated was 58.4 Mt with 10% being diverted from landfills: 3% incinerated and 7% recycled (Ministry of Natural Resources and Ecology of the Russian Federation 2019 ). According to Russian Federation 2019 , landfill gas recovery is not taking place at Russian landfills. This scenario implies the closure of unorganized dump sites, with all the waste to be disposed of on managed dump sites or landfills only.

Scenario 2: REACTIVE (moderate development)

The reactive scenario implies a moderate development of the waste management sector, based on the construction of several large incinerators, a small increase in the share of waste to be recycled and the disposal of remaining waste at sanitary landfills, Footnote 2 with the closure of all the existing unorganized dump sites. In this scenario, all Russian regions were divided into two clusters: the first cluster included the city of Moscow and the Republic of Tatarstan, where new waste incinerators are being built, and the second cluster which includes — all the other cities and regions.

Moscow and the Republic of Tatarstan

In Moscow and Tatarstan together, 8.586 Mt of mixed MSW is generated annually (Cabinet of Ministers of the Republic of Tatarstan 2018 ; Department of Housing and Communal Services of the city of Moscow 2019 ). In an attempt to introduce the waste-to-energy technology in Russia, an international consortium that consists of Swiss, Japanese and Russian firms is currently involved in constructing five state-of-the-art incineration plants in these two areas. Four incinerators are to be built in the Moscow region and one in Kazan, the capital of the Republic of Tatarstan. The annual combined capacity of the four plants in Moscow will be about 2.8 Mt of MSW, and the one of Kazan 0.55 Mt (Bioenergy International 2019 ; Regnum 2017 ). In this scenario, it is assumed that compared to the basic scenario, the share of waste undergone recycling is increased to 10%, i.e., 0.859 Mt annually. Furthermore, these 10% would be transferred to recycling plants to recover secondary raw materials. The remaining 4.377 Mt of mixed MSW would be disposed of in sanitary landfills.

Other cities and regions

In the other cities and regions of Russia, in accordance with the Development Strategy of Waste Recycling Industry until 2030 (Government of the Russian Federation 2018 ), over two hundred new eco-techno parks (i.e., waste recycling complexes) will be built. These facilities will receive mixed MSW that will be sorted there for recycling purposes. Under this scenario, it is also assumed that compared to the basic scenario, the share of waste undergone recycling is increased to 10%, thus transferring 4.982 Mt annually of the mixed MSW to recycling plants. The remaining 44.932 Mt of MSW are disposed of in sanitary landfills.

Scenario 3: INNOVATIVE (active development)

This scenario is based on the legally established priority areas for the development of the industry (Council for Strategic Development and National Projects 2018 ; Government of the Russian Federation 2018 ). The scenario implies deep changes in the industry with the introduction of technologies for incineration, separate collection and recycling of waste. In this scenario, the regions of Russia are divided into three clusters, in accordance with the possibilities of improving the infrastructure for waste management and the need for secondary resources and energy received during the processing of waste. When determining the share of waste to which this or that treatment method is applied, federal targets (Council for Strategic Development and National Projects 2018 ; Government of the Russian Federation 2018 ) and estimates made by the World Bank (Korobova et al. 2014 ) were used.

The first cluster includes two huge, densely populated urban agglomerations in which large incineration plants are under construction: Moscow and Tatarstan. With the construction of new waste incinerators, 3.35 Mt of mixed MSW will be incinerated annually. It is assumed that some 10% of mixed MSW (0.859 Mt) generated in these two regions is to be transferred to eco-techno parks for secondary raw material recovery. Some 20% of the MSW (1.712 Mt) is to be recovered from separately collected waste, and the rest of 2.66 Mt (31%) to be disposed of in sanitary landfills.

Cities with more than 0.5 million inhabitants

This cluster includes large urban agglomerations with developed industry and high demand for materials and energy resources. In this cluster, approx. 28 Mt of MSW is generated annually (Korobova et al. 2014 ). Under this scenario, it is assumed that waste incineration plants are also built in some larger cities, besides Moscow and Kazan. However, the exact quantity and capacity of these plants is yet unknown; it was assumed that in comparison with the basic scenario, in this scenario, the share of incinerated waste increased to 10%, the share of recycled waste to 15%, and a separate waste collection system is partially implemented. Hereby, 10% of the generated mixed MSW (2.79 Mt) is undergoing incineration, 15% (4.185 Mt) is transferred to sorting facilities for secondary raw material recovery, some 20% of the MSW (5.58 Mt) is recovered from separately collected waste and the rest 55% (15.345 Mt) is disposed of in sanitary landfills.

Smaller cities with less than 0.5 million inhabitants and rural areas

This cluster includes smaller cities and towns with some industrial enterprises, as well as rural areas. The amount of waste generated annually in this group of settlements is 21.914 Mt. It is assumed that no waste is incinerated, 15% of the mixed MSW (3.287 Mt) is transferred to sorting facilities for secondary raw material recovery, 10% (2.191 Mt) is recovered from separately collected waste, and the rest 75% (16.435 Mt) is disposed of in sanitary landfills.

Waste flow diagrams corresponding to the three scenarios with their input and output flows are shown in Fig.  1 .

MSW management scenarios with model inputs and outputs

In all the three scenarios, mixed MSW is transferred to sorting facilities where the recovery of valuable materials by mostly hand sorting takes place. Detailed accounts of process efficiency for material recovery facilities, in terms of recovery rates and quality of recovered materials, are scarce in the published literature (Cimpan et al. 2015 ). In the study of Cimpan et al., 2015 , at least three data sets were evaluated with the result that 13–45% of paper, 3–49% of glass, 35–84% of metals and 1–73% of plastics were recovered from the plant input of these materials. Two other studies report similar recovery rates between 60 and 95% for paper, glass, plastic and aluminum for hand and automatic sorting test trials (CalRecovery, Inc and PEER Consultants 1993 ; Hryb 2015 ). Based on this data and the results of the authors’ own experimental studies on manual waste sorting in Russia, the recovery rates for the most valuable waste fractions, including paper/cardboard, glass, metals and plastics had been calculated (Table 1 ). In the Scenario 3, separate collection of paper/cardboard, glass and plastic is introduced. Recovery rates related to the input of the corresponding waste type into each waste management cluster (see Table 1 ) for Moscow and Tatarstan as well as for the cities with more than 0.5 million inhabitants are considered to be higher than for the settlements with less than 0.5 million inhabitants.

For the comparison of GHG emissions of the three elaborated scenarios, a specific assessment model was elaborated.

Model structure

The calculation of the amounts of released and avoided GHG emissions for the different considered waste treatment technologies are based on the 2006 IPCC Guidelines for National Greenhouse Gas Inventories. The IPCC methodology is scientifically widely recognized and used internationally, which makes the results easy comprehensible and easier to compare with other studies.

For the elaboration of the model that would allow calculating the GHG balance emissions, the upstream-operating-downstream (UOD) framework (Gentil et al. 2009 ) was used, where direct emissions from waste management procedures and indirect emissions from upstream and downstream activities are differentiated. On the upstream side, the indirect GHG emissions, like those related to fuel and material extraction, processing and transport as well as plant construction and commissioning, are excluded from the consideration. Indirect emissions from infrastructure construction on the downstream side are outside the system boundaries and not accounted for as they are relatively low (Boldrin et al. 2009 ; Mohareb et al. 2011 ). Direct GHG emissions from the waste transport are also excluded from the system boundaries since they are negligible comparing to the direct emissions from the waste processing/treatment (Weitz et al. 2002 ; Wuensch and Simon 2017 ). Since indirect GHG emissions avoided due to energy and material substitution, as well as carbon sequestration in the downstream processes is significant, they are included into the model. The conceptual framework of the model and its boundaries are shown in Fig.  2 .

Conceptual framework of the model showing upstream and downstream processes along with the system boundaries [derived from Abu Qdais et al. ( 2019 )]

The inputs to the model are waste (its quantity, composition, carbon content fixed in biomass and no-biomass), as well as energy and fuel that are used in the waste treatment processes (see Table 2 and Figs.  1 , 2 and 3 ). The outputs include generated and delivered electricity, recovered secondary materials and sequestrated carbon.

Compensatory system for the substitution of primary materials and energy [derived from Abu Qdais et al. ( 2019 )]

The analysis of MSW composition is not regularly done in Russia, and only a limited number of studies on this subject are published. Since waste composition is the basis for the determination of direct GHG emissions from waste management activities, accurate data is desirable. The Russian Federation is a huge country with both densely populated urban areas and sparsely populated rural areas. Due to the different settlement structures, the waste compositions also differ a lot. It is not expedient to assume an average composition for the entire country. Therefore, hereinafter three clusters had been considered to define waste compositions. The first cluster includes Moscow and the Republic of Tatarstan, since in these regions, a larger amount of mixed MSW is/will be incinerated in the nearest future. The second cluster includes the cities with the population of more than 0.5 million people, and the third cluster includes the settlements with the population of less than 0.5 million people. The waste compositions for these three clusters given in Table 2 are weighted averages of the results of a number of experimental studies of waste composition which were found in sources of the literature published after 2010 and further analyzed. Weighted average here means that the respective data on waste composition that was found for a city or region was included in the weighted average with the proportion that the amount of MSW generated in the city or region takes up as part of the total mass of MSW generated in the respective cluster.

To determine the avoidance of GHG emissions in the downstream processes by means of energy and material substitution as well as carbon sequestration, a compensatory system must be used. In Fig.  3 , the compensatory system for the substitution of energy and primary materials is shown.

Emission factors

Waste incineration.

It is necessary to know the emission factors when calculating GHG emissions from thermal treatment of waste, and also when compiling national emissions inventories (Larsen and Astrup 2011 ). Information on GHG emission factors of various solid waste treatment technologies for each country is of great importance for the assessment of GHGs emitted as a result of adopting a certain technology. However, such factors are not available for the Russian Federation, which implies using the data available in the literature for the countries with the conditions similar to the Russian ones, examining local circumstances of solid waste management system (Friedrich and Trois 2013 ; Larsen and Astrup 2011 ; Noya et al. 2018 ).

There are different factors affecting GHG emission levels from waste incineration. One of the most important factors in determining CO 2 emissions is the amount of fossil carbon in the waste stream meant for incineration. Non-CO 2 emissions are more dependent on the incineration technology and conditions, and for modern waste incinerators, the amounts of non-CO 2 emissions are negligible (Johnke 2001 ; Sabin Guendehou et al. 2006 ).

The amount of fossil carbon was calculated based on waste composition, carbon content and share of fossil carbon given in Table 2 ; the resulting fossil carbon content in wet waste was 0.117 kg C/kg. For the indirectly avoided GHG emissions, the recovery of electricity with a net efficiency of 24% for all the scenarios and for the Scenario 3 also from metals contained in the incinerator slag to substitute primary metals was considered. The recovery of heat in form of process steam or district heat was not considered in the scenarios (Dashieva 2017 ). Further parameters for the calculation of GHG emissions from waste incineration are given in Table 3 .

For the calculation of the impact of the methane released from landfills to climate change over a 100 years’ time horizon, the first-order decay kinetics model was used. Almost 80% of the Russian MSW landfills occupy an area larger than 10 ha (Volynkina and Zaytseva 2010 ). Here, it is assumed that all the MSW is highly compacted and disposed of in deep landfills under anaerobic conditions without the recovery of landfill gas (Govor 2017 ). Since no landfill gas is recovered, in Scenario 1, only the sequestrated non-biodegradable biogenic carbon in the landfill results in avoided GHG emissions. There is an intention in Russia to introduce the collection of landfill gas as the primary measure to reduce GHG emissions from the waste management sector (Government of the Russian Federation 2018 ; Ministry of Natural Resources and Ecology of the Russian Federation 2013 ) within the next years. In the literature, methane recovery rates between 9% (Scharff et al. 2003 ) and 90% (Spokas et al. 2006 ) are reported. For example, most US landfills are well-controlled and managed; in particular, in California, gas collection efficiencies are as high as 82.5% (Kong et al. 2012 ). Based on these values, for both Scenario 2 and Scenario 3, landfill gas recovery is introduced with a recovery rate of 60%. Under these two scenarios, in addition to carbon sequestration, the recovered landfill gas is used to produce electricity, which results in avoided indirect GHG emissions. Other parameters used for the calculation are mainly taken from the latest Russian National Inventory Report where IPCC default parameters were used (Pipatti et al. 2006 ; Russian Federation 2019 ). The parameters used for the calculation of GHG emissions from landfills for all the three scenarios are shown in Table 4 .

• Material recovery

In all the scenarios, some part of mixed MSW is treated in eco-techno parks, where valuable secondary raw materials like metals, paper, glass and plastics are recovered, and the sorting residues are forwarded to landfills. In addition, separate collection of some amounts of paper, glass, and plastics in the Scenario 3 is presumed. The corresponding recovery rates are already given in Table 1 . Each recovered secondary material substitutes a certain amount of primary material. Since the production of primary materials is usually connected with higher energy and raw material consumption than that of the secondary materials, more GHGs are released during the production of the former ones. Therefore, every unit of recovered secondary material obtained leads to a reduction in released GHGs.

GHG emission or substitution factors are developed for specific geographical areas and technologies, and their appropriateness to other circumstances may be questionable (Turner et al. 2015 ). The application of one specific emission factor for a recovered material in the whole Russian Federation would already be debatable due to the size of the country. Perhaps that is why emission factors for Russia cannot be found in the literature. For this study, the average values of GHG emission/substitution factors determined for other industrial countries from the study of (Turner et al. 2015 ) were used. The amounts of avoided GHG, i.e., the values of the emission factors in CO 2 equivalents for the recovered valuable waste fractions, including steel, aluminum, paper/cardboard, glass and plastic, are given in Table 5 .

In Table 5 , the used equivalent factor (Global Warming Potential over a time horizon of 100 years) of released methane versus carbon dioxide, the emission factor of the use of fuel oil in the waste incineration process and the substitution factor of delivered electrical power are shown. The emission factor of the generated electricity in the Russian Federation is relatively low, since approx. half (52%) of the electricity is produced by natural gas and approx. 13% by hydro- and nuclear power, while only 13% is produced by coal (British Petrolium 2019 ; U.S. Energy Information Administration 2017 ). The electricity mix factor is therefore only 0.358 Mg CO 2 -eq./MWh generated electricity (Gimadi et al. 2019 ).

Results and discussion

The population of the Russian Federation is expected to decrease in the next decades (United Nations 2019 ), but due to the economic growth, the amount of waste generated per capita is expected to increase in the same ratio; that is why the calculation of the GHG emissions for all the three scenarios was based on an assumed fixed annually amount of 58.4 Mt of MSW. Average waste compositions were calculated for this study on the basis of eleven waste analyses conducted in different Russian cities between 2010 and 2017 and grouped into three clusters (Moscow and Tatarstan, cities with more than 0.5 million inhabitants and cities/settlements with less than 0.5 million inhabitants). From the available literature data for the countries with conditions similar to Russian ones, emission factors were adopted to be further used in calculations of GHG emissions from waste disposal on managed and sanitary landfills, waste incineration and waste recycling with the recovery of secondary raw materials.

In Fig.  4 , the amounts of CO 2 -equivalent emissions per year that contribute to global warming for each of the three scenarios considered in the study are shown. Since the emissions related to the collection and transportation of waste, as well as energy consumption in the upstream side, are almost similar for all the treatment processes (Komakech et al. 2015 ), and as they are relatively small compared to the operational and downstream emissions (Boldrin et al. 2009 ; Friedrich and Trois 2011 ), they were not considered in the model. Avoided and sequestrated emissions were subtracted from the direct emissions to calculate GHG net emission values.

Global warming contribution of the three considered scenarios

The basic scenario (mostly managed landfilling without landfill gas recovery) gives the highest GHG net emissions among all the analyzed scenarios of approx. 64 Mt CO 2 -eq./a, followed by the reactive scenario (mostly sanitary landfilling with landfill gas recovery) with approx. 12.8 Mt CO 2 -eq./a of GHG net emissions. The innovative scenario (sanitary landfilling with landfill gas recovery and increased shares of MSW incineration, separate collection and material recovery) had shown an almost neutral GHG balance with approx. 3.7 Mt CO 2 -eq./a of GHG net emissions.

To assess the impact of the introduction of various waste treatment methods on the amount of GHG emissions from the waste management sector, the specific GHG emissions for each scenario as a whole was calculated, as well as “within” scenarios for each considered waste management process/method (Table 6 ).

The amount of specific total GHG emissions under Scenario 2 is five times less than under Scenario 1. Such a large difference is due to the modernization of existing managed dumpsites (Scenario 1), instead of which MSW is disposed of at sanitary landfills equipped with landfill gas and leachate collection systems, with intermediate insulating layers and top capping (Scenario 2). Such a transition from managed dumpsites to sanitary landfills leads not only to a decrease in the amount of specific released GHG emissions by approx. 1 Mg CO 2 -eq./Mg MSW, but also to a decrease in total emissions due to avoided emissions in the amount of 0.053 Mg CO 2 -eq./Mg MSW generated by energy recovery.

The amount of specific total GHG emissions under Scenario 3 is 3.4 times less than under Scenario 2. This reduction is mainly due to an almost twofold increase in the volume of waste incinerated, along with the introduction of a separate waste collection system (Scenario 3). At the same time, in Scenario 3, the share of plastic in the mixed waste stream sent to incineration is less than in Scenarios 1 and 2 (see Fig.  1 ). Climate-related GHG from waste incineration are generated mainly due to the plastic contained in the waste. Therefore, in Scenario 3, less GHG emissions are released during waste incineration. Reduction in GHG emissions from waste incineration is also facilitated by the recovery of metals from the bottom ash, which occurs only in Scenario 3.

In Scenario 3, the total amount of recycled material is larger than in Scenario 2, since not only part of the mixed waste is recycled, but also separately collected. According to the Scenario 3, metals are not included in the waste fractions collected separately. Metals have a comparably high GHG substitution factor (see Table 5 ); this explains the slight decrease in avoided GHG emissions due to material recovery in Scenario 3 compared to Scenario 2 because of a decreased share of metals in the total waste stream sent for recycling.

Many studies confirm GHG emissions reduction by the application of these waste treatment concepts. It is shown that the recovery of landfill gas from managed landfills has a high potential to reduce GHG emissions from landfills (EI-Fadel and Sbayti 2000 ; Friedrich and Trois 2016 ; Lee et al. 2017 ; Starostina et al. 2014 ). The transfer from the disposal of mixed MSW on landfills to the incineration on waste incineration or waste-to-energy plants leads to further reduction in GHG emissions (Bilitewski and Wuensch 2012 ; Chen 2018 ; Voigt et al. 2015 ). The recovery of secondary materials from MSW allows avoiding additional amounts of GHG emissions (Björklund and Finnveden 2005 ; Franchetti and Kilaru 2012 ; Turner et al. 2015 ; Wuensch and Simon 2017 ).

It should be noted that the calculated results of the direct GHG emissions from landfilling and waste incineration are subject to uncertainties. Waste composition (Table 2 ) and the parameters set/assumed for the landfills (Table 4 ) and waste incineration (Table 3 ) affect the level of the results. Indirect downstream emissions from recovered secondary materials and substituted energy cannot be provided with accuracy, as indicated by missing data for the substitution factors of recovered secondary materials in Russia and the variability of the scenarios for substituted electricity. To get an impression about the possible fluctuation range of the determined results, a sensitivity analysis was carried out. Therefore, all values shown in Tables 1 , 3 , 4 and 5 were ones decreased by 10% and once increased by 10%. The impact of the sensitivity analysis on the GHG net emissions is shown as error bars in Fig.  4 . The results of the sensitivity analysis show a range for the GHG net emissions of the basic scenario between 35.129 and 91.446 Mt CO 2 -eq./a, for the reactive scenario between 5.133 and 16.324 Mt CO 2 -eq./a and for the innovative scenario from − 1.516 to 4.871 Mt CO 2 -eq./a.

All the exact values of the final results shown in Fig.  4 as well as the graphical representation of the results of the sensitivity analysis can be checked in the provided supplementary materials.

The most recent data about global GHG emissions from solid waste disposal shows that direct emissions contribute with 0.67 Gt CO 2 -eq./a (Fischedick et al. 2014 ) to about 1.4% of the total anthropogenic GHG emissions of 49 Gt CO 2 -eq./a (Edenhofer et al. 2015 ). For the Russian Federation, the contribution of the direct emissions from the MSW management accounts for approx. 3.7% of the total GHG emissions of the country of around 2.2 Gt CO 2 -eq./a (Russian Federation 2019 ). In this study, the potential of different waste management methods in relation to climate change impact was assessed using the example of the Russian waste management industry. For this purpose, three scenarios had been developed and analyzed:

Basic scenario (business as usual), based on the existing waste management practices. The scenario implies that 90% of the generated mixed MSW is disposed of on managed dumpsites, 7% is undergone material recovery and 3% incinerated. All the unorganized dumpsites are closed; on managed dumpsites, there is no landfill gas recovery.

Reactive scenario (moderate development). This scenario implies construction of a number of large waste incineration plants and an increase in the share of waste to be recycled so that 84.3% of generated MSW is disposed of in sanitary landfills, 10% is sent to recycling plants for material recovery, and 5.7% is incinerated.

Innovative scenario (active development). This scenario assumes partial implementation of a separate waste collection system and broader introduction of waste processing technologies. As a result, 20% of the total generated MSW is collected separately and then recycled, 14.3% undergoes material recovery, 55.2% is disposed of in sanitary landfills, and 10.5% is incinerated.

For determining weighed average morphological composition of MSW, three clusters of human settlements had been considered, and the respective data on waste compositions had been analyzed. The first cluster includes Moscow and the Republic of Tatarstan, the second cluster includes the major cities (those with the population of more than 0.5 million people), and the third cluster includes the minor cities and rural areas.

For determining emission factors, both own calculation results and reference data from the National Inventory Report and other sources were used. Thus, the amount of fossil carbon, being one of the most important factors determining CO 2 emissions from waste incineration, was calculated based on the waste composition, carbon content and the share of fossil carbon in the waste. For the calculation of the amount of CH 4 released from MSW landfills, the first-order decay kinetics model was used. Avoided GHG emissions are the result of sequestrated non-biodegradable biogenic carbon in landfills (all the scenarios) and recovered landfill gas used to produce electricity (Scenarios 2 and 3). With the use of emission factors for material recovery included those for the recovered valuable waste fractions steel, aluminum, paper and cardboard, glass and plastic, GHG emissions were calculated under each scenario. As it was expected, the basic scenario gives the highest amount of total GHG net emissions of approx. 64 Mt CO 2 -eq./a (1.096 Mg CO 2 -eq./Mg MSW). Under the reactive scenario, the amount of total GHG net emissions is approx. 12.8 Mt CO 2 -eq./a (0.219 Mg CO 2 -eq./Mg MSW), and under the innovative scenario, it is about 3.7 Mt CO 2 -eq./a (0.064 Mg CO 2 -eq./Mg MSW).

The calculation of specific GHG emissions made it possible to assess the extent to which the introduction of various waste treatment methods makes it possible to reduce GHG emissions resulting from the respective waste treatment processes. Analysis of the results of these calculations showed that the transition from managed dumpsites to sanitary landfills can reduce total GHG emissions from the Russian waste management sector by up to 5 times. The introduction of a separate collection system (in which 20% of waste is collected separately) with a simultaneous twofold increase in the share of waste incinerated has led to a more than threefold reduction in total GHG emissions from the sector of Russian waste management. Another factor influencing the reduction in GHG emissions from waste incineration is the recovery of metals from the bottom ash.

Direct GHG emissions can be further reduced with a shift from landfilling to treatment of mixed MSW in material recovery facilities and waste incinerators or even to separate collection and treatment of MSW. In addition, indirect downstream emissions can be avoided by a significant amount via energy and material recovery. With a separate collection and treatment of biowaste and the recovery of district heat from waste incineration process, further GHG mitigation can be obtained. With these additional measures, the MSW industry of the Russian Federation could become a net avoider from a net emitter.

For this study, a number of parameters and emission factors from the literature where used, which does not precisely reflect the situation in Russia. Conducting further research for determining country specific, for a huge country like Russia, possibly even region-specific data and emission factors resulting in the development of a corresponding database would be useful to minimize these uncertainties.

Data availability

Not applicable.

Acknowledgements

The authors wish to thank all who assisted in conducting this work.

Open Access funding enabled and organized by Projekt DEAL.

Author information

Authors and affiliations.

Institute of Waste Management and Circular Economy, Department of Hydrosciences, Technische Universität Dresden, Pratzschwitzer Str. 15, 01796, Pirna, Germany

Department of Engineering and Natural Sciences, Merseburg University of Applied Sciences, 06217, Merseburg, Germany

Environmental Protection Department, Perm National Research Polytechnic University, Prof. Pozdeev Street 14, Perm, Russia, 614013

You can also search for this author in PubMed   Google Scholar

Contributions

CW involved in conceptualization, data curation, methodology, validation, visualization, writing — original draft, and writing — review and editing. AT involved in conceptualization, data curation, investigation, and writing — original draft.

Corresponding author

Correspondence to C. Wünsch .

Ethics declarations

Conflict of interest.

The authors declare that they have no conflict of interest.

Additional information

Editorial responsibility: Maryam Shabani

Supplementary Information

Below is the link to the electronic supplementary material.

Supplementary file 1 (PDF 225 KB)

Supplementary file 2 (xlsx 37 kb), supplementary file 3 (xlsx 21 kb), rights and permissions.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/ .

Reprints and permissions

About this article

Wünsch, C., Tsybina, A. Municipal solid waste management in Russia: potentials of climate change mitigation. Int. J. Environ. Sci. Technol. 19 , 27–42 (2022). https://doi.org/10.1007/s13762-021-03542-5

Download citation

Received : 17 September 2020

Revised : 13 March 2021

Accepted : 09 July 2021

Published : 29 July 2021

Issue Date : January 2022

DOI : https://doi.org/10.1007/s13762-021-03542-5

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Climate change
• Greenhouse gases
• Russian Federation
• Incineration
• Separate collection of waste
• Waste composition
• Find a journal
• Publish with us
• Track your research

• Review Assignment
• Announcements
• About the Course
• Explore Courses

NPTEL: Exam Registration is open now for July 2023 courses!

Dear Candidate,

Here is a golden opportunity for those who had previously enrolled in this course during the July 2022 semester, but could not participate in the exams or were absent/did not pass the exam for this course. This course is being reoffered in July 2023 and we are giving you another chance to write the exam in October 2023 and obtain a certificate based on NPTEL norms. Do not let go of this unique opportunity to earn a certificate from the IITs/IISc.

IMPORTANT instructions for learners - Please read this carefully  

1. The exam date for this course: Oct 29, 2023

2. CLICK HERE to register for the exam.

Please fill the exam form using the same Enrolled email id & make fee payment via the form, as before.

3. Choose from the Cities where exam will be conducted: Exam Cities

4. You DO NOT have to re-enroll in the courses. 

5. You DO NOT have to resubmit Assignments OR participate in the non-proctored programming exams(if applicable) in the previous semester

6. If you do enroll in the July 2023 course, we will take the best average assignment scores/non-proctored programming exam(if applicable) score across the two semesters.

Please check once if you have >= 40/100  in average assignment score and also participated and satisfied the criteria in the non-proctored programming exams(if applicable) that were conducted in July 2022 to become eligible for the e-certificate, wherever applicable.

If not, please submit assignments again in the July 2023 course and also participate in the non-proctored programming exams(if applicable) to become eligible for the e-certificate.

We will not be having new assignments or unproctored exams(if applicable) in the previous semester's ( July 2022 ) course. 

RECOMMENDATION: If you want to take new assignments and an unproctored exam(if applicable) or brush up on your lessons for the exam, please enroll in the July 2023 course.

Click here to enroll in the current course, links are provided corresponding to the course name.

7. Exam fees: 

If you register for the exam and pay before Aug 14, 2023, 5:00 PM, Exam fees will be Rs. 1000/- per exam .

8. 50% fee waiver for the following categories: 

Students belonging to the SC/ST category: please select Yes for the SC/ST option and upload the correct Community certificate.

Students belonging to the PwD category with more than 40% disability: please select Yes for the option and upload the relevant Disability certificate. 

9. Last date for exam registration: Aug 18, 2023, 5:00 PM (Friday). 

10. Between Aug 14, 2023, 5:00 PM & Aug 18, 2023, 5:00 PM late fee will be applicable.

11. Mode of payment: Online payment - debit card/credit card/net banking/UPI. 

12. HALL TICKET: 

The hall ticket will be available for download tentatively by 2 weeks prior to the exam date. We will confirm the same through an announcement once it is published. 

13. FOR CANDIDATES WHO WOULD LIKE TO WRITE MORE THAN 1 COURSE EXAM:- you can add or delete courses and pay separately – till the date when the exam form closes. Same day of exam – you can write exams for 2 courses in the 2 sessions. Same exam center will be allocated for both the sessions. 

14. Data changes: 

Last date for data changes: Aug 18, 2023, 5:00 PM :  

We will charge an additional fee of Rs. 200 to make any changes related to name, DOB, photo, signature, SC/ST and PWD certificates after the last date of data changes.

The following 6 fields can be changed (until the form closes) ONLY when there are NO courses in the course cart. And you will be able to edit those fields only if you: - 

REMOVE unpaid courses from the cart And/or - CANCEL paid courses 

1. Do you come under the SC/ST category? * 

2. SC/ST Proof 

3. Are you a person with disabilities? * 

4. Are you a person with disabilities above 40%? 

5. Disabilities Proof 

6. What is your role? 

Note: Once you remove or cancel a course, you will be able to edit these fields immediately. 

But, for cancelled courses, refund of fees will be initiated only after 2 weeks. 

15. LAST DATE FOR CANCELLING EXAMS and getting a refund: Aug 18, 2023, 5:00 PM  

16. Click here to view Timeline and Guideline : Guideline

Domain Certification

Domain Certification helps learners to gain expertise in a specific Area/Domain. This can be helpful for learners who wish to work in a particular area as part of their job or research or for those appearing for some competitive exam or becoming job ready or specialising in an area of study.  

Every domain will comprise Core courses and Elective courses. Once a learner completes the requisite courses per the mentioned criteria, you will receive a Domain Certificate showcasing your scores and the domain of expertise. Kindly refer to the following link for the list of courses available under each domain: https://nptel.ac.in/domains

Outside India Candidates

Candidates who are residing outside India may also fill the exam form and pay the fees. Mode of exam and other details will be communicated to you separately.

Thanks & Regards, 

Thank you for learning with NPTEL!!

Dear Learner, Thank you for taking the course with NPTEL!! Hope you enjoyed the journey with us. The results for this course have been published and we are closing this course now.  You will still have access to the contents and assignments of this course, if you click on the course name from the " Mycourses " tab on swayam.gov.in. For any further queries please write to [email protected] . - Team NPTEL

Municipal Solid Waste Management : Result Published!!

Dear Candidate, The exam scores and E Certificates have been released for October 2022 Exam(s). Step 1 - Are the results of my courses released? Please check the Results published courses list in the below links.:- October 2022 Exam - Click here Step 2 - How to check Results? Please login to internalapp.nptel.ac.in/ . and check your exam results. Use the same login credentials as used to register to the exam. What's next? Please read the pass criteria carefully and check against what you have gotten. If you still have any issues, please report the same here. internalapp.nptel.ac.in/ . We will reply within a week. Last date to report queries: 3 days within publishing of scores. Note : Hard copies of certificates will not be dispatched. The duration shown in the certificate will be based on the timeline of offering of the course in 2022, irrespective of which Assignment score that will be considered. Thanks and Best wishes. NPTEL Team

Municipal Solid Waste Management : Final Feedback Form!!

Dear student, We are glad that you have attended the NPTEL online certification course. We hope you found the NPTEL Online course useful and have started using NPTEL extensively. In this regard, we would like to have feedback from you regarding our course and whether there are any improvements, you would like to suggest.   We are enclosing an online feedback form and would request you to spare some of your valuable time to input your observations. Your esteemed input will help us in serving you better. The link to give your feedback is: https://docs.google.com/forms/d/1HVek90Gh4pIL2NlqyTvkcobCKxOHbebYGDxcToCqjSo/viewform We thank you for your valuable time and feedback. Thanks & Regards, -NPTEL Team

October 2022 NPTEL Exams - Hall Tickets Released!

***THIS IS APPLICABLE ONLY FOR EXAM REGISTERED CANDIDATES*** Dear Candidate, Your Hall Ticket / admit card for the NPTEL Exam(s) in October, 2022 has been released. Please login to https://internalapp.nptel.ac.in/ using your exam registered email id and download your hall ticket. Note:  Requests for changes in exam city, exam center, exam date, session, or course will NOT be entertained. Please write to [email protected] for any further queries. All the best for your exams! Warm Regards NPTEL Team

Exam Format - Oct 30, 2022

Dear Candidate, ****This is applicable only for the exam registered candidates**** Type of exam will be available in the list: Click Here You will have to appear at the allotted exam center and produce your Hall ticket and Government Photo Identification Card (Example: Driving License, Passport, PAN card, Voter ID, Aadhaar-ID with your Name, date of birth, photograph and signature) for verification and take the exam in person.  You can find the final allotted exam center details in the hall ticket. The hall ticket is yet to be released.  We will notify the same through email and SMS. Type of exam: Computer based exam (Please check in the above list corresponding to your course name) The questions will be on the computer and the answers will have to be entered on the computer; type of questions may include multiple choice questions, fill in the blanks, essay-type answers, etc. Type of exam: Paper and pen Exam  (Please check in the above list corresponding to your course name) The questions will be on the computer. You will have to write your answers on sheets of paper and submit the answer sheets. Papers will be sent to the faculty for evaluation. On-Screen Calculator Demo Link: Kindly use the below link to get an idea of how the On-screen calculator will work during the exam. https://tcsion.com/ OnlineAssessment/ ScientificCalculator/ Calculator.html NOTE: Physical calculators are not allowed inside the exam hall. -NPTEL Team

Municipal Solid Waste Management: Week 12 content is live now!

Dear Learners, The lecture videos for  Week 12  have been uploaded for the course  “ Municipal Solid Waste Management ” The lectures can be accessed using the following link: Lecture 41 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment 12  for  Week 12  is also released and can be accessed from the following link: Assignment 12 The assignment has to be submitted on or before  Wednesday, 19th October 2022, 23:59 IST. We have also added the feedback form for this week, you may visit the below link and provide your feedback: Feedback 12 Please use the discussion forums if you have any questions on this module. Note:  Please check the due date of the assignments in the announcement and assignment page if you see any mismatch write to us immediately. Thanks and Regards -NPTEL Course Team

Municipal Solid Waste Management: Week 11 content is live now!

Dear Learners, The lecture videos for  Week 11  have been uploaded for the course  “ Municipal Solid Waste Management ” The lectures can be accessed using the following link: Lecture 37 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment 11  for  Week 11  is also released and can be accessed from the following link: Assignment 11 The assignment has to be submitted on or before  Wednesday, 12th October 2022, 23:59 IST. We have also added the feedback form for this week, you may visit the below link and provide your feedback: Feedback 11 Please use the discussion forums if you have any questions on this module. Note:  Please check the due date of the assignments in the announcement and assignment page if you see any mismatch write to us immediately. Thanks and Regards -NPTEL Course Team

Municipal Solid Waste Management: Live interaction with Course Instructor!

Dear Students, You can interact LIVE with the Course Instructor  Prof. Ajay Kalamdhad,   IIT Guwahati of the course -  " Municipal Solid Waste Management "  Date :  13/10/2022   Time :  4:15 PM - 5:15 PM Youtube Link to participate :     Click here Or Microsoft Teams Link to participate :     Click here Please follow the link below to post your questions that you may want  Prof. Ajay Kalamdhad   to answer during the live interaction session.: Click here  to post your question. You can also ask your doubts during the session through the chat window. We would also like to hear from you after the session. Request you to share your thoughts in the forum. Happy Learning! -NPTEL Team

Municipal Solid Waste Management: Week 10 content is live now!

Dear Learners, The lecture videos for  Week 10  have been uploaded for the course  “ Municipal Solid Waste Management ” The lectures can be accessed using the following link: Lecture 35 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment 10  for  Week 10  is also released and can be accessed from the following link: Assignment 10 The assignment has to be submitted on or before  Wednesday, 05th October 2022, 23:59 IST. We have also added the feedback form for this week, you may visit the below link and provide your feedback: Feedback 10 Please use the discussion forums if you have any questions on this module. Note:  Please check the due date of the assignments in the announcement and assignment page if you see any mismatch write to us immediately. Thanks and Regards -NPTEL Course Team

Municipal Solid Waste Management: Week 09 content is live now!

Dear Learners, The lecture videos for  Week 09  have been uploaded for the course  “ Municipal Solid Waste Management ” The lectures can be accessed using the following link: Lecture 33 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment 9  for  Week 9  is also released and can be accessed from the following link: Assignment 09 The assignment has to be submitted on or before  Wednesday, 28th September 2022, 23:59 IST. We have also added the feedback form for this week, you may visit the below link and provide your feedback: Feedback 09 Please use the discussion forums if you have any questions on this module. Note:  Please check the due date of the assignments in the announcement and assignment page if you see any mismatch write to us immediately. Thanks and Regards -NPTEL Course Team

Municipal Solid Waste Management: Week 08 content is live now!

Dear Learners, The lecture videos for  Week 08  have been uploaded for the course  “ Municipal Solid Waste Management ” The lectures can be accessed using the following link: Lecture 30 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment 8  for  Week 8  is also released and can be accessed from the following link: Assignment 08 The assignment has to be submitted on or before  Wednesday, 21st September 2022, 23:59 IST. We have also added the feedback form for this week, you may visit the below link and provide your feedback: Feedback 08 Please use the discussion forums if you have any questions on this module. Note:  Please check the due date of the assignments in the announcement and assignment page if you see any mismatch write to us immediately. Thanks and Regards -NPTEL Course Team

Dear Students, You can interact LIVE with the Course Instructor  Prof. Ajay Kalamdhad,   IIT Guwahati of the course -  " Municipal Solid Waste Management "  Date :  13/09/2022   Time :  4:15 PM - 5:15 PM Link to participate :     Click here Please follow the link below to post your questions that you may want  Prof. Ajay Kalamdhad   to answer during the live interaction session.: Click here  to post your question. You can also ask your doubts during the session through the chat window. We would also like to hear from you after the session. Request you to share your thoughts in the forum. Happy Learning! -NPTEL Team

Municipal Solid Waste Management: Week 07 content is live now!

Dear Learners, The lecture videos for  Week 07  have been uploaded for the course  “ Municipal Solid Waste Management ” The lectures can be accessed using the following link: Lecture 27 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment 7  for  Week 7  is also released and can be accessed from the following link: Assignment 07 The assignment has to be submitted on or before  Wednesday, 14th September 2022, 23:59 IST. We have also added the feedback form for this week, you may visit the below link and provide your feedback: Feedback 07 Please use the discussion forums if you have any questions on this module. Note:  Please check the due date of the assignments in the announcement and assignment page if you see any mismatch write to us immediately. Thanks and Regards -NPTEL Course Team

Dear Students, You can interact LIVE with the Course Instructor  Prof. Ajay Kalamdhad,   IIT Guwahati of the course -  " Municipal Solid Waste Management "  Date :  29/08/2022   Time :  3 PM - 4 PM Link to participate :     Click here Please follow the link below to post your questions that you may want  Prof. Ajay Kalamdhad   to answer during the live interaction session.: Click here  to post your question. You can also ask your doubts during the session through the chat window. We would also like to hear from you after the session. Request you to share your thoughts in the forum. Happy Learning! -NPTEL Team

Municipal Solid Waste Management: Week 06 content is live now!

Dear Learners, The lecture videos for  Week 06  have been uploaded for the course  “ Municipal Solid Waste Management ” The lectures can be accessed using the following link: Lecture 24 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment 6  for  Week 6  is also released and can be accessed from the following link: Assignment 06 The assignment has to be submitted on or before  Wednesday, 7th September 2022, 23:59 IST. We have also added the feedback form for this week, you may visit the below link and provide your feedback: Feedback 06 Please use the discussion forums if you have any questions on this module. Note:  Please check the due date of the assignments in the announcement and assignment page if you see any mismatch write to us immediately. Thanks and Regards -NPTEL Course Team

Municipal Solid Waste Management: Week 05 content is live now!

Dear Learners, The lecture videos for  Week 05  have been uploaded for the course  “ Municipal Solid Waste Management ” The lectures can be accessed using the following link: Lecture 19 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment 5  for  Week 5  is also released and can be accessed from the following link: Assignment 05 The assignment has to be submitted on or before  Wednesday, 31st August 2022, 23:59 IST. We have also added the feedback form for this week, you may visit the below link and provide your feedback: Feedback 05 Please use the discussion forums if you have any questions on this module. Note:  Please check the due date of the assignments in the announcement and assignment page if you see any mismatch write to us immediately. Thanks and Regards -NPTEL Course Team

Municipal Solid Waste Management: Week 04 content is live now!

Dear Learners, The lecture videos for  Week 04  have been uploaded for the course  “ Municipal Solid Waste Management ” The lectures can be accessed using the following link: Lecture 15   The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment 4  for  Week 4  is also released and can be accessed from the following link: Assignment 04 The assignment has to be submitted on or before  Wednesday, 24th August 2022, 23:59 IST. We have also added the feedback form for this week, you may visit the below link and provide your feedback: Feedback 04 Please use the discussion forums if you have any questions on this module. Note:  Please check the due date of the assignments in the announcement and assignment page if you see any mismatch write to us immediately. Thanks and Regards -NPTEL Course Team

Reminder: Municipal Solid Waste Management : regarding assignment submission

Dear learners, This is a gentle reminder regarding the submission of  Assignments 1 & 2 . The due date of assignments 1 & 2 are   August 10, 2022, 23:59 IST . If you have not submitted the assignments, please submit those before the due date. Please note that the due date will not be extended for the assignments. Happy Learning. -NPTEL Team

Municipal Solid Waste Management: Week 03 content is live now!

Dear Learners, The lecture videos for  Week 03  have been uploaded for the course  “ Municipal Solid Waste Management ” The lectures can be accessed using the following link: Lecture 11 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment 3  for  Week 3  is also released and can be accessed from the following link: Assignment 03 The assignment has to be submitted on or before  Wednesday, 17th August 2022, 23:59 IST. We have also added the feedback form for this week, you may visit the below link and provide your feedback: Feedback 03 Please use the discussion forums if you have any questions on this module. Note:  Please check the due date of the assignments in the announcement and assignment page if you see any mismatch write to us immediately. Thanks and Regards -NPTEL Course Team

Municipal Solid Waste Management: Week 02 content is live now!

Dear Learners, The lecture videos for  Week 02  have been uploaded for the course  “ Municipal Solid Waste Management ” The lectures can be accessed using the following link: Lecture 07 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment 2  for  Week 2  is also released and can be accessed from the following link: Assignment 02 The assignment has to be submitted on or before  Wednesday, 10th August 2022, 23:59 IST. We have also added the feedback form for this week, you may visit the below link and provide your feedback: Feedback 02 Please use the discussion forums if you have any questions on this module. Note:  Please check the due date of the assignments in the announcement and assignment page if you see any mismatch write to us immediately. Thanks and Regards -NPTEL Course Team

Municipal Solid Waste Management: Week 01 content is live now!

Dear Learners, The lecture videos for  Week 01  have been uploaded for the course  “ Municipal Solid Waste Management ” The lectures can be accessed using the following link: Lecture 01 The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already). Assignment-< Number >  for  Week-<Number>  is also released and can be accessed from the following link: Assignment 01 The assignment has to be submitted on or before  Wednesday, 10th August 2022, 23:59 IST. We have also added the feedback form for this week, you may visit the below link and provide your feedback: Feedback 01 Please use the discussion forums if you have any questions on this module. Note:  Please check the due date of the assignments in the announcement and assignment page if you see any mismatch write to us immediately. Thanks and Regards -NPTEL Course Team

Municipal Solid Waste Management: Assignment 0 is live now!

Dear Learners, We welcome you all to this course: Assignment 0(Mock Assignment) has been released. Kindly note that marks obtained in this assignment will not be considered for the final assessment. You can find the assignment in the link below: Assignments URL:  https://onlinecourses.nptel.ac.in/noc22_ce82/unit?unit=16&assessment=104 Please use the discussion forum if you have any queries. Happy Learning!! Regards Team NPTEL

NPTEL: Exam Registration is open now for July 2022 courses!

Dear Learner, 

Here is the much-awaited announcement on registering for the July 2022 NPTEL course certification exam. 

1. The registration for the certification exam is open only to those learners who have enrolled in the course. 

2. If you want to register for the exam for this course, login here using the same email id which you had used to enroll to the course in Swayam portal. Please note that Assignments submitted through the exam registered email id ALONE will be taken into consideration towards final consolidated score & certification. 

3 . Date of exam: Oct 30, 2022

CLICK HERE to register for the exam. 

Choose from the Cities where exam will be conducted: Exam Cities

4. Exam fees: 

If you register for the exam and pay before Sep 12, 2022, 10:00 AM, Exam fees will be Rs. 1000/- per exam . 

If you register for exam before Sep 12, 2022, 10:00 AM and have not paid or if you register between Sep 12, 2022, 10:00 AM & Sep 16, 2022, 10:00 AM, Exam fees will be Rs. 1500/- per exam 

5. 50% fee waiver for the following categories: 

6. Last date for exam registration: Sep 16, 2022, 10:00 AM (Friday). 

7. Mode of payment: Online payment - debit card/credit card/net banking/UPI. 

8. HALL TICKET: 

The hall ticket will be available for download tentatively by 2 weeks prior to the exam date . We will confirm the same through an announcement once it is published. 

9. FOR CANDIDATES WHO WOULD LIKE TO WRITE MORE THAN 1 COURSE EXAM:- you can add or delete courses and pay separately – till the date when the exam form closes. Same day of exam – you can write exams for 2 courses in the 2 sessions. Same exam center will be allocated for both the sessions. 

10. Data changes: 

Last date for data changes: Sep 16, 2022, 10:00 AM :  

All the fields in the Exam form except for the following ones can be changed until the form closes. 

The following 6 fields can be changed ONLY when there are NO courses in the course cart. And you will be able to edit the following fields only if you: - 

6. What is your role ? 

11. LAST DATE FOR CANCELLING EXAMS and getting a refund: Sep 16, 2022, 10:00 AM  

12. Click here to view Timeline and Guideline : Guideline

Every domain will comprise Core courses and Elective courses. Once a learner completes the requisite courses per the mentioned criteria, you will receive a Domain Certificate showcasing your scores and the domain of expertise. Kindly refer to the following link for the list of courses available under each domain:  https://nptel.ac.in/domains

Municipal Solid Waste Management: Welcome to NPTEL Online Course - July 2022!!

• Every week, about 2.5 to 4 hours of videos containing content by the Course instructor will be released along with an assignment based on this. Please watch the lectures, follow the course regularly and submit all assessments and assignments before the due date. Your regular participation is vital for learning and doing well in the course. This will be done week on week through the duration of the course.
• Please do the assignments yourself and even if you take help, kindly try to learn from it. These assignments will help you prepare for the final exams. Plagiarism and violating the Honor Code will be taken very seriously if detected during the submission of assignments.
• The announcement group - will only have messages from course instructors and teaching assistants - regarding the lessons, assignments, exam registration, hall tickets, etc.
• The discussion forum (Ask a question tab on the portal) - is for everyone to ask questions and interact. Anyone who knows the answers can reply to anyone's post and the course instructor/TA will also respond to your queries.
• Please make maximum use of this feature as this will help you learn much better.
• If you have any questions regarding the exam, registration, hall tickets, results, queries related to the technical content in the lectures, any doubts in the assignments, etc can be posted in the forum section
• The course is free to enroll and learn from. But if you want a certificate, you have to register and write the proctored exam conducted by us in person at any of the designated exam centres.
• The exam is optional for a fee of Rs 1000/- (Rupees one thousand only).
• Date and Time of Exams: October 30, 2022 Morning session 9am to 12 noon; Afternoon Session 2 pm to 5 pm.
• Registration URL: Announcements will be made when the registration form is open for registrations.
• The online registration form has to be filled and the certification exam fee needs to be paid. More details will be made available when the exam registration form is published. If there are any changes, it will be mentioned then.
• Please check the form for more details on the cities where the exams will be held, the conditions you agree to when you fill the form etc.
• Once again, thanks for your interest in our online courses and certification. Happy learning.

A project of

In association with

Course Name: Municipal Solid Waste Management

• About Course
• Certificate Type
• Toppers list
• Registration

Course abstract

The problems affiliated with solid waste management (SWM) in today's sprawling civilized and urbanized society are intricate because of the quantity and varied nature of wastes, the funding restriction for public disposal, interference of technology (energy and raw materials), and complex infrastructure development network in urban cities. As a result, if SWM is to achieve in consummate approach, the fundamentals aspects need to be identified. Thus, there is dire need to group the activities from the generation to the disposal point. The six different functional elements (generation, handing and separations, storage and processing at source, collection, the transformation of wastes, transfer and transport, and final disposal) for the engineering comparison and treatment need to be understood in detail. The understanding of the functional element is important because it helps in evaluating the impacts of projected changes and technological developments. Solid waste management is an essential part of every society, but it is also one of the most neglected one. An in-depth understanding of the subject is required to tackle the current solid waste management crisis effectively. This course attempts to familiarize various steps involved in solid waste management.

Course Instructor

Prof. Ajay Kalamdhad

Teaching assistant(s),  course duration : jul-oct 2021,   view course,  syllabus,  enrollment : 20-may-2021 to 02-aug-2021,  exam registration : 17-jun-2021 to 17-sep-2021,  exam date : 24-oct-2021,   course statistics will be published shortly, certificate eligible, certified category count, successfully completed, participation.

Category : Successfully Completed

Category : Elite

Category : Silver

Category : Gold

Final score calculation logic.

• Assignment Score = Average of best 8 out of 12 assignments.
• Final Score(Score on Certificate)= 75% of Exam Score + 25% of Assignment Score Note:We have taken best assignment score from both July 2020 and July 2021 courses

DIVYAM YADAVA 82%

KAMLA NEHRU INSTITUTE OF TECHNOLOGY

SUMAN BIJLANI 79%

KAVYA SANTHOSH 79%

SREE BUDDHA COLLEGE OF ENGINEERING

RM SHARMA 78%

Govt Service

SHRADHA OJHA 77%

TARIQUE AHMAD 77%

ZAKIR HUSSAIN COLLEGE OF ENGINEERING AND TECHNOLOGY

SREELAKSHMI JS 77%

THANGAL KUNJU MUSALIAR COLLEGE OF ENGINEERING

AMIT VIKRAM PANDEY 76%

PRABHANSHU RAJ 76%

NATIONAL INSTITUTE OF TECHNOLOGY PATNA

GOUTAM SIKDAR 76%

NARULA INSTITUTE OF TECHNOLOGY

SHIVENDRA YADAV 75%

ATHULYA C 75%

N.S.S COLLEGE OF ENGINEERING

JITENDRA PRATAP SINGH 75%

Faculty of Engineering and Technology,University of Lucknow

SHAHNAWAJ HUSSAIN 75%

AKUL SIROHI 73%

ASHUTOSH KUMAR SINGH 73%

AMAN YADAV 73%

SHAILASHREE M K 73%

THE NATIONAL INSTITUTE OF ENGINEERING

JAIN P ANTONY 73%

MAR ATHANASIUS COLLEGE OF ENGINEERING

THIRUMALESH KUNTUMALLA 72%

SRI VENKATESWARA UNIVERSITY COLLEGE OF ENGINEERING

HARI LAL RAM 72%

SHASHANK KUMAR NAYAK 72%

ADITYA KUMAR 72%

PULIGUNDLA GUNASEKHAR 72%

AISWARYA K AJITH 72%

AKHILENDRA PRATAP SINGH 72%

MADHUKRISHNA M S 71%

VIDYA ACADEMY OF SCIENCE & TECHNOLOGY

NISSY MARY SANTHOSH 71%

AMAL JYOTHI COLLEGE OF ENGINEERING

G L VENKAT LAXMI 71%

GOWTHAMI R 71%

ANJALI R S 71%

GOVERNMENT ENGINEERING COLLEGE, THRISSUR

ATHUL MV 71%

MARIAN ENGINEERING COLLEGE

SANJAY CHOUDHARY 71%

SHRI GOVINDRAM SEKSARIA INSTITUTE OF TECHNOLOGY AND SCIENCES

ARAVIND V A 71%

ANANDHU P 71%

YADHU JAYAN 71%

MUTHOOT INSTITUTE OF TECHNOLOGY & SCIENCE

MOHAMMAD SHADAN AHMAD 71%

PARVATHY B R 71%

SHAILESH SINGH 70%

RAGHAVENDRA N D 70%

ANKUR PRABHAKAR 70%

GEETHANJALI ARUNKUMAR 70%

AMAN SHARMA 70%

GOVERNMENT COLLEGE OF ENGINEERING AND TECHNOLOGY

HARKIRAT SINGH 70%

MEENAKSHI SHARMA 70%

Enrollment Statistics

Total enrollment: 3989, registration statistics, total registration : 1373, assignment statistics, score distribution graph - legend, assignment score: distribution of average scores garnered by students per assignment., exam score : distribution of the final exam score of students., final score : distribution of the combined score of assignments and final exam, based on the score logic..