essay on non renewable sources of energy

• Natural Sources Of Energy
• Non Renewable Energy

Non-renewable Energy

Non-renewable energy, also known as nonrenewable energy, is a limited resource that will eventually deplete over time. It is crucial to understand and responsibly utilise non-renewable energy sources. Non-renewable energy encompasses fossil fuels like coal, crude oil and natural gas. This article will delve into various aspects of non-renewable energy resources, including types, examples, advantages and disadvantages. We will also explore the characteristics and implications of non-renewable energy, shedding light on its finite nature and the need for responsible utilisation.

What is Non-renewable Energy?

Non-renewable energy is energy sources that exist in finite quantities and cannot be naturally replenished or regenerated. These energy resources are formed through natural processes, such as the decomposition of organic matter or the nuclear reactions occurring in the Earth’s core. Non-renewable energy plays a significant role in meeting our current energy demands but poses challenges due to its finite nature and environmental impact.

Non-renewable energy has been the backbone of modern industrialization and has fueled economic growth for centuries. However, the finite nature of these resources calls for the exploration and development of sustainable alternatives, such as renewable energy sources like solar and wind.

Non-renewable Energy Resources

Non-renewable resources primarily consist of fuels derived from fossil deposits. Let’s explore some of the most commonly utilised non-renewable energy sources:

Coal has long been a significant contributor to non-renewable energy production. Coal is formed from ancient plants’ remains and extracted from underground mines or surface mining methods. It is widely used in electricity generation and industrial processes, making it a prominent non-renewable energy resource.

Petroleum Products

Petroleum products are another essential component of non-renewable energy sources derived from crude oil. Crude oil is extracted from underground reservoirs and refined into various products, including gasoline, diesel, jet fuel, and heating oil.

Compressed Natural Gas (CNG)

CNG is sourced from natural gas reserves and compressed for use in vehicles, particularly in transportation fleets and as a fuel for natural gas power plants. CNG is gaining popularity due to its lower emissions and cost-effectiveness.

These non-renewable energy sources provide a significant portion of our energy needs. However, it is important to recognize their finite nature and explore alternative energy options to ensure a sustainable future. 

Types of Non-renewable Energy

Non-renewable energy primarily consists of fossil fuels and nuclear fuels. Let’s explore each of these types in detail:

Fossil Fuels

Fossil fuels are formed from the remains of ancient plants and animals that underwent a process of decomposition over millions of years. They are categorized into three main types:

Natural Gas

Natural gas is a gaseous fossil fuel composed mainly of methane. It is often found in association with oil deposits. Natural gas is a versatile energy source used for heating, cooking, electricity generation, and as a fuel for vehicles.

Coal is a solid fossil fuel that forms when plant material, such as trees, plants, and ferns, undergoes decomposition under high pressure and heat over millions of years. It is primarily used for electricity generation in power plants and is known for its significant carbon content.

Oil is a liquid fossil fuel that results from the decomposition of smaller organisms like zooplankton and algae, which were subjected to immense pressure over time. Oil is a crucial energy resource used in transportation, manufacturing, and producing various petrochemical products.

Nuclear Fuels

Nuclear fuels are utilised in nuclear power plants, where energy is generated through nuclear fission. The most commonly used nuclear fuel is uranium, found in the Earth’s crust in relatively low concentrations. Uranium undergoes fission reactions, releasing large amounts of energy.

Understanding the significance of both fossil fuels and nuclear fuels as non-renewable energy sources is important. While they have played a crucial role in meeting our energy demands, their extraction, use, and environmental impact must be carefully managed.

Advantages of Non-renewable energy

• Non-renewable sources of energy, such as diesel and oil, are known for their affordability, making them accessible to a wide range of applications.
• Non-renewable energy sources offer ease of accessibility and compatibility with existing infrastructure.
• These energy sources are relatively easy to store, providing convenience in meeting energy demands.

Disadvantages of Non-renewable energy

• Non-renewable energy is finite in nature, once depleted, it cannot be replenished. 
• The by-products generated from non-renewable energy production contribute to environmental damage and an increase in greenhouse gas emissions.
• The transportation, mining, and extraction activities associated with non-renewable energy sources can result in accidents such as oil spills, nuclear meltdowns, pipeline leaks, and explosions, causing severe harm to the environment.

Environmental Impact of Non-renewable Energy

Greenhouse gas emissions.

Burning non-renewable energy sources, particularly fossil fuels, releases significant amounts of carbon dioxide and other greenhouse gases into the atmosphere.

Air Pollution

Non-renewable energy production and consumption result in the emission of air pollutants leading to poor air quality and adverse health effects.

Water Pollution 

The extraction and utilisation of non-renewable energy resources through coal mining leads to water pollution. Spills, leaks, and improper waste disposal can contaminate water sources.

Land Degradation

Extracting non-renewable resources involves land disturbance, deforestation, and soil erosion.

Conservation of Non-renewable Energy

Here are several reasons why there is a need to conserve non-renewable energy:

Finite Resource

Non-renewable energy sources are limited in supply and will eventually run out. By conserving these resources, we can prolong their availability for future generations.

Environmental Impact

Non-renewable energy production and consumption have significant ecological consequences. By conserving non-renewable energy, we can reduce these negative impacts.

Climate Change Mitigation

Non-renewable energy sources are significant contributors to greenhouse gas emissions.. Conserving non-renewable energy is crucial in mitigating climate change.

In summary, conserving non-renewable energy is essential to ensure long-term resource availability, minimise environmental impacts and mitigate climate change.

Watch the video to find out why it is so important to conserve fossil fuels and use them wisely.

Frequently Asked Questions

What is non-renewable energy.

Non-renewable energy is energy sources that exist in finite quantities and cannot be naturally replenished or regenerated.

What are the main non-renewable energy resources?

The primary non-renewable energy resources are coal, petroleum products and compressed natural gas (CNG).

What are the advantages of non-renewable energy?

Non-renewable energy sources are reliable, affordable and are easy to store.

What are the disadvantages of non-renewable energy?

Non-renewable energy sources contribute to air and water pollution, greenhouse gas emissions, and climate change.

Are there alternatives to non-renewable energy?

Yes, there are alternative sources of energy that are renewable and sustainable. These include solar power, wind energy, hydropower, geothermal energy, and biomass.

Stay tuned to BYJU’S and Fall in Love with Learning !

Put your understanding of this concept to test by answering a few MCQs. Click ‘Start Quiz’ to begin!

Select the correct answer and click on the “Finish” button Check your score and answers at the end of the quiz

Visit BYJU’S for all Physics related queries and study materials

Your result is as below

Request OTP on Voice Call

Leave a Comment Cancel reply

Your Mobile number and Email id will not be published. Required fields are marked *

Post My Comment

I Love Byjus forever and ever Thank you Byjus for giving answers for my questions

• Share Share

Register with BYJU'S & Download Free PDFs

Register with byju's & watch live videos.

• school Campus Bookshelves
• menu_book Bookshelves
• perm_media Learning Objects
• login Login
• how_to_reg Request Instructor Account
• hub Instructor Commons
• Download Page (PDF)
• Download Full Book (PDF)
• Periodic Table
• Physics Constants
• Scientific Calculator
• Reference & Cite
• Tools expand_more
• Readability

selected template will load here

This action is not available.

1.13: Non-renewable energy sources

• Last updated
• Save as PDF
• Page ID 33033

INTRODUCTION

Sufficient, reliable sources of energy are a necessity for industrialized nations. Energy is used for heating, cooking, transportation and manufacturing. Energy can be generally classified as non-renewable and renewable. Over 85% of the energy used in the world is from non-renewable supplies. Most developed nations are dependent on non-renewable energy sources such as fossil fuels (coal and oil) and nuclear power. These sources are called non-renewable because they cannot be renewed or regenerated quickly enough to keep pace with their use. Some sources of energy are renewable or potentially renewable. Examples of renewable energy sources are: solar, geothermal, hydroelectric, biomass, and wind. Renewable energy sources are more commonly by used in developing nations.

Industrialized societies depend on non-renewable energy sources. Fossil fuels are the most commonly used types of non-renewable energy. They were formed when incompletely decomposed plant and animal matter was buried in the earth's crust and converted into carbon-rich material that is useable as fuel. This process occurred over millions of years. The three main types of fossil fuels are coal, oil, and natural gas. Two other less-used sources of fossil fuels are oil shales and tar sands.

Coal is the most abundant fossil fuel in the world with an estimated reserve of one trillion metric tons. Most of the world's coal reserves exist in Eastern Europe and Asia, but the United States also has considerable reserves. Coal formed slowly over millions of years from the buried remains of ancient swamp plants. During the formation of coal, carbonaceous matter was first compressed into a spongy material called "peat," which is about 90% water. As the peat became more deeply buried, the increased pressure and temperature turned it into coal.

Different types of coal resulted from differences in the pressure and temperature that prevailed during formation. The softest coal (about 50% carbon), which also has the lowest energy output, is called lignite . Lignite has the highest water content (about 50%) and relatively low amounts of smog-causing sulfur. With increasing temperature and pressure, lignite is transformed into bituminous coal (about 85% carbon and 3% water). Anthracite (almost 100% carbon) is the hardest coal and also produces the greatest energy when burned. Less than 1% of the coal found in the United States is anthracite. Most of the coal found in the United States is bituminous . Unfortunately, bituminous coal has the highest sulfur content of all the coal types. When the coal is burned, the pollutant sulfur dioxide is released into the atmosphere.

Coal mining creates several environmental problems. Coal is most cheaply mined from near-surface deposits using strip mining techniques. Strip-mining causes considerable environmental damage in the forms of erosion and habitat destruction. Sub-surface mining of coal is less damaging to the surface environment, but is much more hazardous for the miners due to tunnel collapses and gas explosions. Currently, the world is consuming coal at a rate of about 5 billion metric tons per year. The main use of coal is for power generation, because it is a relatively inexpensive way to produce power.

Coal is used to produce over 50% of the electricity in the United States. In addition to electricity production, coal is sometimes used for heating and cooking in less developed countries and in rural areas of developed countries. If consumption continues at the same rate, the current reserves will last for more than 200 years. The burning of coal results in significant atmospheric pollution. The sulfur contained in coal forms sulfur dioxide when burned. Harmful nitrogen oxides, heavy metals, and carbon dioxide are also released into the air during coal burning. The harmful emissions can be reduced by installing scrubbers and electrostatic precipitators in the smokestacks of power plants. The toxic ash remaining after coal burning is also an environmental concern and is usually disposed into landfills.

Crude oil or liquid petroleum, is a fossil fuel that is refined into many different energy products (e.g., gasoline, diesel fuel, jet fuel, heating oil). Oil forms underground in rock such as shale , which is rich in organic materials. After the oil forms, it migrates upward into porous reservoir rock such as sandstone or limestone, where it can become trapped by an overlying impermeable cap rock. Wells are drilled into these oil reservoirs to remove the gas and oil. Over 70 percent of oil fields are found near tectonic plate boundaries, because the conditions there are conducive to oil formation.

Oil recovery can involve more than one stage. The primary stage involves pumping oil from reservoirs under the normal reservoir pressure. About 25 percent of the oil in a reservoir can be removed during this stage. The secondary recovery stage involves injecting hot water into the reservoir around the well. This water forces the remaining oil toward the area of the well from which it can be recovered. Sometimes a tertiary method of recovery is used in order to remove as much oil as possible. This involves pumping steam, carbon dioxide gas or nitrogen gas into the reservoir to force the remaining oil toward the well. Tertiary recovery is very expensive and can cost up to half of the value of oil removed. Carbon dioxide used in this method remains sequestered in the deep reservoir, thus mitigating its potential greenhouse effect on the atmosphere. The refining process required to convert crude oil into useable hydrocarbon compounds involves boiling the crude and separating the gases in a process known as fractional distillation. Besides its use as a source of energy, oil also provides base material for plastics, provides asphalt for roads and is a source of industrial chemicals.

Over 50 percent of the world's oil is found in the Middle East; sizeable additional reserves occur in North America. Most known oil reserves are already being exploited, and oil is being used at a rate that exceeds the rate of discovery of new sources. If the consumption rate continues to increase and no significant new sources are found, oil supplies may be exhausted in another 30 years or so.

Despite its limited supply, oil is a relatively inexpensive fuel source. It is a preferred fuel source over coal. An equivalent amount of oil produces more kilowatts of energy than coal. It also burns cleaner, producing about 50 percent less sulfur dioxide.

Oil, however, does cause environmental problems. The burning of oil releases atmospheric pollutants such as sulfur dioxide, nitrogen oxides, carbon dioxide and carbon monoxide. These gases are smog-precursors that pollute the air and greenhouse gases that contribute to global warming. Another environmental issue associated with the use of oil is the impact of oil drilling. Substantial oil reserves lie under the ocean. Oil spill accidents involving drilling platforms kill marine organisms and birds. Some reserves such as those in northern Alaska occur in wilderness areas. The building of roads, structures and pipelines to support oil recovery operations can severely impact the wildlife in those natural areas.

NATURAL GAS

Natural gas production is often a by-product of oil recovery, as the two commonly share underground reservoirs. Natural gas is a mixture of gases, the most common being methane (CH4). It also contains some ethane (C2H5), propane (C3H8), and butane (C4H10). Natural gas is usually not contaminated with sulfur and is therefore the cleanest burning fossil fuel. After recovery, propane and butane are removed from the natural gas and made into liquefied petroleum gas ( LPG ). LPG is shipped in special pressurized tanks as a fuel source for areas not directly served by natural gas pipelines (e.g., rural communities). The remaining natural gas is further refined to remove impurities and water vapor, and then transported in pressurized pipelines. The United States has over 300,000 miles of natural gas pipelines. Natural gas is highly flammable and is odorless. The characteristic smell associated with natural gas is actually that of minute quantities of a smelly sulfur compound ( ethyl mercaptan ) which is added during refining to warn consumers of gas leaks.

The use of natural gas is growing rapidly. Besides being a clean burning fuel source, natural gas is easy and inexpensive to transport once pipelines are in place. In developed countries, natural gas is used primarily for heating, cooking, and powering vehicles. It is also used in a process for making ammonia fertilizer. The current estimate of natural gas reserves is about 100 million metric tons. At current usage levels, this supply will last an estimated 100 years. Most of the world's natural gas reserves are found in Eastern Europe and the Middle East.

OIL SHALE AND TAR SANDS

Oil shale and tar sands are the least utilized fossil fuel sources. Oil shale is sedimentary rock with very fine pores that contain kerogen , a carbon-based, waxy substance. If shale is heated to 490º C, the kerogen vaporizes and can then be condensed as shale oil, a thick viscous liquid. This shale oil is generally further refined into usable oil products. Production of shale oil requires large amounts of energy for mining and processing the shale. Indeed about a half barrel of oil is required to extract every barrel of shale oil. Oil shale is plentiful, with estimated reserves totaling 3 trillion barrels of recoverable shale oil. These reserves alone could satisfy the world's oil needs for about 100 years. Environmental problems associated with oil shale recovery include: large amounts of water needed for processing, disposal of toxic waste water, and disruption of large areas of surface lands.

Tar sand is a type of sedimentary rock that is impregnated with a very thick crude oil. This thick crude does not flow easily and thus normal oil recovery methods cannot be used to mine it. If tar sands are near the surface, they can be mined directly. In order to extract the oil from deep-seated tar sands, however, steam must be injected into the reservoir to make the oil flow better and push it toward the recovery well. The energy cost for producing a barrel of tar sand is similar to that for oil shale. The largest tar-sand deposit in the world is in Canada and contains enough material (about 500 billion barrels) to supply the world with oil for about 15 years. However, because of environmental concerns and high production costs these tar sand fields are not being fully utilized.

NUCLEAR POWER

In most electric power plants, water is heated and converted into steam, which drives a turbine-generator to produce electricity. Fossil-fueled power plants produce heat by burning coal, oil, or natural gas. In a nuclear power plant , the fission of uranium atoms in the reactor provides the heat to produce steam for generating electricity.

Several commercial reactor designs are currently in use in the United States. The most widely used design consists of a heavy steel pressure vessel surrounding a reactor core. The reactor core contains the uranium fuel, which is formed into cylindrical ceramic pellets and sealed in long metal tubes called fuel rods . Thousands of fuel rods form the reactor core. Heat is produced in a nuclear reactor when neutrons strike uranium atoms, causing them to split in a continuous chain reaction. Control rods , which are made of a material such as boron that absorbs neutrons, are placed among the fuel assemblies.

When the neutron-absorbing control rods are pulled out of the core, more neutrons become available for fission and the chain reaction speeds up, producing more heat. When they are inserted into the core, fewer neutrons are available for fission, and the chain reaction slows or stops, reducing the heat generated. Heat is removed from the reactor core area by water flowing through it in a closed pressurized loop. The heat is transferred to a second water loop through a heat exchanger. The water also serves to slow down, or "moderate" the neutrons which is necessary for sustaining the fission reactions. The second loop is kept at a lower pressure, allowing the water to boil and create steam, which is used to power the turbine-generator and produce electricity.

Originally, nuclear energy was expected to be a clean and cheap source of energy. Nuclear fission does not produce atmospheric pollution or greenhouse gases and it proponents expected that nuclear energy would be cheaper and last longer than fossil fuels. Unfortunately, because of construction cost overruns, poor management, and numerous regulations, nuclear power ended up being much more expensive than predicted. The nuclear accidents at Three Mile Island in Pennsylvania and the Chernobyl Nuclear Plant in the Ukraine raised concerns about the safety of nuclear power. Furthermore, the problem of safely disposing spent nuclear fuel remains unresolved. The United States has not built a new nuclear facility in over twenty years, but with continued energy crises across the country that situation may change.

ENCYCLOPEDIC ENTRY

Nonrenewable resources.

Nonrenewable energy resources include coal, natural gas, oil, and nuclear energy. Once these resources are used up, they cannot be replaced, which is a major problem for humanity as we are currently dependent on them to supply most of our energy needs.

Chemistry, Conservation, Earth Science

Coal-fire Plant

An aerial view of a coal-fired power plant in Mount Storm, West Virginia, taken in June 2012.

Photograph by Getty Images.

Renewable and nonrenewable resources are energy sources that human society uses to function on a daily basis. The difference between these two types of resources is that renewable resources can naturally replenish themselves while nonrenewable resources cannot. This means that nonrenewable resources are limited in supply and cannot be used sustainably.

There are four major types of nonrenewable resources: oil, natural gas, coal , and nuclear energy . Oil, natural gas, and coal are collectively called fossil fuels . Fossil fuels were formed within the Earth from dead plants and animals over millions of years—hence the name “fossil” fuels . They are found in underground layers of rock and sediment. Pressure and heat worked together to transform the plant and animal remains into crude oil (also known as petroleum), coal , and natural gas.

The plants and animals that became fossil fuels lived in a time called Carboniferous Period , around 300 to 360 million years ago. The energy in the plant and animal remains originally came from the sun; through the process of photosynthesis, solar energy is st ored in plant tissues, which animals then consume, adding the energy to their own bodies. When fossil fuels are burned, this trapped energy is released.

Crude oil is a liquid fuel   fossil fuel that is used mostly to produce gasoline and diesel fuel for vehicles, and for the manufacturing of plastics. It is found in rocks below Earth’s surface and is pumped out through wells.

Natural gas is widely used for cooking and for heating homes. It consists mostly of methane and is found near oil deposits below Earth’s surface. Natural gas can be pumped out through the same wells used for extracting crude oil.

Coal is a solid fossil fuel that is used for heating homes and generating power plants . It is found in fossilized swamps that have been buried beneath layers of sediment. Since coal is solid, it cannot be extracted in the same manner as crude oil or natural gas; it must be dug up from the ground.

Nuclear energy comes from radioactive elements, mainly uranium , which is extracted from mined ore and then refined into fuel .

Unfortunately, human society is—for the time being—dependent on nonrenewable resources as its primary source of energy. Approximately 80 percent of the total amount of energy used globally each year comes from fossil fuels. We depend on fossil fuels because they are energy-rich and relatively cheap to process. But a major problem with fossil fuels, aside from their being in limited supply, is that burning them releases carbon dioxide into the atmosphere. Rising levels of heat-trapping carbon dioxide in the atmosphere is the main cause of global warming.

Alternative energy sources, such as wind and solar energy, are a possible solution to the depletion of nonrenewable sources. Both of these clean energy sources are available in unlimited supply.

Media Credits

The audio, illustrations, photos, and videos are credited beneath the media asset, except for promotional images, which generally link to another page that contains the media credit. The Rights Holder for media is the person or group credited.

Production Managers

Program specialists, last updated.

October 19, 2023

User Permissions

For information on user permissions, please read our Terms of Service. If you have questions about how to cite anything on our website in your project or classroom presentation, please contact your teacher. They will best know the preferred format. When you reach out to them, you will need the page title, URL, and the date you accessed the resource.

If a media asset is downloadable, a download button appears in the corner of the media viewer. If no button appears, you cannot download or save the media.

Text on this page is printable and can be used according to our Terms of Service .

Interactives

Any interactives on this page can only be played while you are visiting our website. You cannot download interactives.

Related Resources

If you're seeing this message, it means we're having trouble loading external resources on our website.

If you're behind a web filter, please make sure that the domains *.kastatic.org and *.kasandbox.org are unblocked.

To log in and use all the features of Khan Academy, please enable JavaScript in your browser.

AP®︎/College Environmental science

Course: ap®︎/college environmental science   >   unit 5.

• Renewable and nonrenewable energy resources

Renewable and nonrenewable energy sources

• Global energy use
• Intro to energy resources and consumption
• Nonrenewable energy sources are those that are consumed faster than they can be replaced. Nonrenewable energy sources include nuclear energy as well as fossil fuels such as coal, crude oil, and natural gas. These energy sources have a finite supply, and often emit harmful pollutants into the environment.
• Renewable energy sources are those that are naturally replenished on a relatively short timescale. Renewable energy sources include solar, wind, hydroelectric, and geothermal energy. They also include biomass and hydrogen fuels. These energy sources are sustainable and generate fewer greenhouse gas emissions than fossil fuels.

Want to join the conversation?

• Upvote Button navigates to signup page
• Downvote Button navigates to signup page
• Flag Button navigates to signup page