what goes in a case study

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base

Methodology

• What Is a Case Study? | Definition, Examples & Methods

What Is a Case Study? | Definition, Examples & Methods

Published on May 8, 2019 by Shona McCombes . Revised on November 20, 2023.

A case study is a detailed study of a specific subject, such as a person, group, place, event, organization, or phenomenon. Case studies are commonly used in social, educational, clinical, and business research.

A case study research design usually involves qualitative methods , but quantitative methods are sometimes also used. Case studies are good for describing , comparing, evaluating and understanding different aspects of a research problem .

Table of contents

When to do a case study, step 1: select a case, step 2: build a theoretical framework, step 3: collect your data, step 4: describe and analyze the case, other interesting articles.

A case study is an appropriate research design when you want to gain concrete, contextual, in-depth knowledge about a specific real-world subject. It allows you to explore the key characteristics, meanings, and implications of the case.

Case studies are often a good choice in a thesis or dissertation . They keep your project focused and manageable when you don’t have the time or resources to do large-scale research.

You might use just one complex case study where you explore a single subject in depth, or conduct multiple case studies to compare and illuminate different aspects of your research problem.

Prevent plagiarism. Run a free check.

Once you have developed your problem statement and research questions , you should be ready to choose the specific case that you want to focus on. A good case study should have the potential to:

• Provide new or unexpected insights into the subject
• Challenge or complicate existing assumptions and theories
• Propose practical courses of action to resolve a problem
• Open up new directions for future research

TipIf your research is more practical in nature and aims to simultaneously investigate an issue as you solve it, consider conducting action research instead.

Unlike quantitative or experimental research , a strong case study does not require a random or representative sample. In fact, case studies often deliberately focus on unusual, neglected, or outlying cases which may shed new light on the research problem.

Example of an outlying case studyIn the 1960s the town of Roseto, Pennsylvania was discovered to have extremely low rates of heart disease compared to the US average. It became an important case study for understanding previously neglected causes of heart disease.

However, you can also choose a more common or representative case to exemplify a particular category, experience or phenomenon.

Example of a representative case studyIn the 1920s, two sociologists used Muncie, Indiana as a case study of a typical American city that supposedly exemplified the changing culture of the US at the time.

While case studies focus more on concrete details than general theories, they should usually have some connection with theory in the field. This way the case study is not just an isolated description, but is integrated into existing knowledge about the topic. It might aim to:

• Exemplify a theory by showing how it explains the case under investigation
• Expand on a theory by uncovering new concepts and ideas that need to be incorporated
• Challenge a theory by exploring an outlier case that doesn’t fit with established assumptions

To ensure that your analysis of the case has a solid academic grounding, you should conduct a literature review of sources related to the topic and develop a theoretical framework . This means identifying key concepts and theories to guide your analysis and interpretation.

There are many different research methods you can use to collect data on your subject. Case studies tend to focus on qualitative data using methods such as interviews , observations , and analysis of primary and secondary sources (e.g., newspaper articles, photographs, official records). Sometimes a case study will also collect quantitative data.

Example of a mixed methods case studyFor a case study of a wind farm development in a rural area, you could collect quantitative data on employment rates and business revenue, collect qualitative data on local people’s perceptions and experiences, and analyze local and national media coverage of the development.

The aim is to gain as thorough an understanding as possible of the case and its context.

Receive feedback on language, structure, and formatting

Professional editors proofread and edit your paper by focusing on:

• Academic style
• Vague sentences
• Style consistency

See an example

In writing up the case study, you need to bring together all the relevant aspects to give as complete a picture as possible of the subject.

How you report your findings depends on the type of research you are doing. Some case studies are structured like a standard scientific paper or thesis , with separate sections or chapters for the methods , results and discussion .

Others are written in a more narrative style, aiming to explore the case from various angles and analyze its meanings and implications (for example, by using textual analysis or discourse analysis ).

In all cases, though, make sure to give contextual details about the case, connect it back to the literature and theory, and discuss how it fits into wider patterns or debates.

If you want to know more about statistics , methodology , or research bias , make sure to check out some of our other articles with explanations and examples.

• Normal distribution
• Degrees of freedom
• Null hypothesis
• Discourse analysis
• Control groups
• Mixed methods research
• Non-probability sampling
• Quantitative research
• Ecological validity

Research bias

• Rosenthal effect
• Implicit bias
• Cognitive bias
• Selection bias
• Negativity bias
• Status quo bias

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

McCombes, S. (2023, November 20). What Is a Case Study? | Definition, Examples & Methods. Scribbr. Retrieved April 9, 2024, from https://www.scribbr.com/methodology/case-study/

Is this article helpful?

Shona McCombes

Other students also liked, primary vs. secondary sources | difference & examples, what is a theoretical framework | guide to organizing, what is action research | definition & examples, what is your plagiarism score.

How to write a case study — examples, templates, and tools

It’s a marketer’s job to communicate the effectiveness of a product or service to potential and current customers to convince them to buy and keep business moving. One of the best methods for doing this is to share success stories that are relatable to prospects and customers based on their pain points, experiences, and overall needs.

That’s where case studies come in. Case studies are an essential part of a content marketing plan. These in-depth stories of customer experiences are some of the most effective at demonstrating the value of a product or service. Yet many marketers don’t use them, whether because of their regimented formats or the process of customer involvement and approval.

A case study is a powerful tool for showcasing your hard work and the success your customer achieved. But writing a great case study can be difficult if you’ve never done it before or if it’s been a while. This guide will show you how to write an effective case study and provide real-world examples and templates that will keep readers engaged and support your business.

In this article, you’ll learn:

What is a case study?

How to write a case study, case study templates, case study examples, case study tools.

A case study is the detailed story of a customer’s experience with a product or service that demonstrates their success and often includes measurable outcomes. Case studies are used in a range of fields and for various reasons, from business to academic research. They’re especially impactful in marketing as brands work to convince and convert consumers with relatable, real-world stories of actual customer experiences.

The best case studies tell the story of a customer’s success, including the steps they took, the results they achieved, and the support they received from a brand along the way. To write a great case study, you need to:

• Celebrate the customer and make them — not a product or service — the star of the story.
• Craft the story with specific audiences or target segments in mind so that the story of one customer will be viewed as relatable and actionable for another customer.
• Write copy that is easy to read and engaging so that readers will gain the insights and messages intended.
• Follow a standardized format that includes all of the essentials a potential customer would find interesting and useful.
• Support all of the claims for success made in the story with data in the forms of hard numbers and customer statements.

Case studies are a type of review but more in depth, aiming to show — rather than just tell — the positive experiences that customers have with a brand. Notably, 89% of consumers read reviews before deciding to buy, and 79% view case study content as part of their purchasing process. When it comes to B2B sales, 52% of buyers rank case studies as an important part of their evaluation process.

Telling a brand story through the experience of a tried-and-true customer matters. The story is relatable to potential new customers as they imagine themselves in the shoes of the company or individual featured in the case study. Showcasing previous customers can help new ones see themselves engaging with your brand in the ways that are most meaningful to them.

Besides sharing the perspective of another customer, case studies stand out from other content marketing forms because they are based on evidence. Whether pulling from client testimonials or data-driven results, case studies tend to have more impact on new business because the story contains information that is both objective (data) and subjective (customer experience) — and the brand doesn’t sound too self-promotional.

Case studies are unique in that there’s a fairly standardized format for telling a customer’s story. But that doesn’t mean there isn’t room for creativity. It’s all about making sure that teams are clear on the goals for the case study — along with strategies for supporting content and channels — and understanding how the story fits within the framework of the company’s overall marketing goals.

Here are the basic steps to writing a good case study.

1. Identify your goal

Start by defining exactly who your case study will be designed to help. Case studies are about specific instances where a company works with a customer to achieve a goal. Identify which customers are likely to have these goals, as well as other needs the story should cover to appeal to them.

The answer is often found in one of the buyer personas that have been constructed as part of your larger marketing strategy. This can include anything from new leads generated by the marketing team to long-term customers that are being pressed for cross-sell opportunities. In all of these cases, demonstrating value through a relatable customer success story can be part of the solution to conversion.

2. Choose your client or subject

Who you highlight matters. Case studies tie brands together that might otherwise not cross paths. A writer will want to ensure that the highlighted customer aligns with their own company’s brand identity and offerings. Look for a customer with positive name recognition who has had great success with a product or service and is willing to be an advocate.

The client should also match up with the identified target audience. Whichever company or individual is selected should be a reflection of other potential customers who can see themselves in similar circumstances, having the same problems and possible solutions.

Some of the most compelling case studies feature customers who:

• Switch from one product or service to another while naming competitors that missed the mark.
• Experience measurable results that are relatable to others in a specific industry.
• Represent well-known brands and recognizable names that are likely to compel action.
• Advocate for a product or service as a champion and are well-versed in its advantages.

Whoever or whatever customer is selected, marketers must ensure they have the permission of the company involved before getting started. Some brands have strict review and approval procedures for any official marketing or promotional materials that include their name. Acquiring those approvals in advance will prevent any miscommunication or wasted effort if there is an issue with their legal or compliance teams.

3. Conduct research and compile data

Substantiating the claims made in a case study — either by the marketing team or customers themselves — adds validity to the story. To do this, include data and feedback from the client that defines what success looks like. This can be anything from demonstrating return on investment (ROI) to a specific metric the customer was striving to improve. Case studies should prove how an outcome was achieved and show tangible results that indicate to the customer that your solution is the right one.

This step could also include customer interviews. Make sure that the people being interviewed are key stakeholders in the purchase decision or deployment and use of the product or service that is being highlighted. Content writers should work off a set list of questions prepared in advance. It can be helpful to share these with the interviewees beforehand so they have time to consider and craft their responses. One of the best interview tactics to keep in mind is to ask questions where yes and no are not natural answers. This way, your subject will provide more open-ended responses that produce more meaningful content.

4. Choose the right format

There are a number of different ways to format a case study. Depending on what you hope to achieve, one style will be better than another. However, there are some common elements to include, such as:

• An engaging headline
• A subject and customer introduction
• The unique challenge or challenges the customer faced
• The solution the customer used to solve the problem
• The results achieved
• Data and statistics to back up claims of success
• A strong call to action (CTA) to engage with the vendor

It’s also important to note that while case studies are traditionally written as stories, they don’t have to be in a written format. Some companies choose to get more creative with their case studies and produce multimedia content, depending on their audience and objectives. Case study formats can include traditional print stories, interactive web or social content, data-heavy infographics, professionally shot videos, podcasts, and more.

5. Write your case study

We’ll go into more detail later about how exactly to write a case study, including templates and examples. Generally speaking, though, there are a few things to keep in mind when writing your case study.

• Be clear and concise. Readers want to get to the point of the story quickly and easily, and they’ll be looking to see themselves reflected in the story right from the start.
• Provide a big picture. Always make sure to explain who the client is, their goals, and how they achieved success in a short introduction to engage the reader.
• Construct a clear narrative. Stick to the story from the perspective of the customer and what they needed to solve instead of just listing product features or benefits.
• Leverage graphics. Incorporating infographics, charts, and sidebars can be a more engaging and eye-catching way to share key statistics and data in readable ways.
• Offer the right amount of detail. Most case studies are one or two pages with clear sections that a reader can skim to find the information most important to them.
• Include data to support claims. Show real results — both facts and figures and customer quotes — to demonstrate credibility and prove the solution works.

6. Promote your story

Marketers have a number of options for distribution of a freshly minted case study. Many brands choose to publish case studies on their website and post them on social media. This can help support SEO and organic content strategies while also boosting company credibility and trust as visitors see that other businesses have used the product or service.

Marketers are always looking for quality content they can use for lead generation. Consider offering a case study as gated content behind a form on a landing page or as an offer in an email message. One great way to do this is to summarize the content and tease the full story available for download after the user takes an action.

Sales teams can also leverage case studies, so be sure they are aware that the assets exist once they’re published. Especially when it comes to larger B2B sales, companies often ask for examples of similar customer challenges that have been solved.

Now that you’ve learned a bit about case studies and what they should include, you may be wondering how to start creating great customer story content. Here are a couple of templates you can use to structure your case study.

Template 1 — Challenge-solution-result format

• Start with an engaging title. This should be fewer than 70 characters long for SEO best practices. One of the best ways to approach the title is to include the customer’s name and a hint at the challenge they overcame in the end.
• Create an introduction. Lead with an explanation as to who the customer is, the need they had, and the opportunity they found with a specific product or solution. Writers can also suggest the success the customer experienced with the solution they chose.
• Present the challenge. This should be several paragraphs long and explain the problem the customer faced and the issues they were trying to solve. Details should tie into the company’s products and services naturally. This section needs to be the most relatable to the reader so they can picture themselves in a similar situation.
• Share the solution. Explain which product or service offered was the ideal fit for the customer and why. Feel free to delve into their experience setting up, purchasing, and onboarding the solution.
• Explain the results. Demonstrate the impact of the solution they chose by backing up their positive experience with data. Fill in with customer quotes and tangible, measurable results that show the effect of their choice.
• Ask for action. Include a CTA at the end of the case study that invites readers to reach out for more information, try a demo, or learn more — to nurture them further in the marketing pipeline. What you ask of the reader should tie directly into the goals that were established for the case study in the first place.

Template 2 — Data-driven format

• Start with an engaging title. Be sure to include a statistic or data point in the first 70 characters. Again, it’s best to include the customer’s name as part of the title.
• Create an overview. Share the customer’s background and a short version of the challenge they faced. Present the reason a particular product or service was chosen, and feel free to include quotes from the customer about their selection process.
• Present data point 1. Isolate the first metric that the customer used to define success and explain how the product or solution helped to achieve this goal. Provide data points and quotes to substantiate the claim that success was achieved.
• Present data point 2. Isolate the second metric that the customer used to define success and explain what the product or solution did to achieve this goal. Provide data points and quotes to substantiate the claim that success was achieved.
• Present data point 3. Isolate the final metric that the customer used to define success and explain what the product or solution did to achieve this goal. Provide data points and quotes to substantiate the claim that success was achieved.
• Summarize the results. Reiterate the fact that the customer was able to achieve success thanks to a specific product or service. Include quotes and statements that reflect customer satisfaction and suggest they plan to continue using the solution.
• Ask for action. Include a CTA at the end of the case study that asks readers to reach out for more information, try a demo, or learn more — to further nurture them in the marketing pipeline. Again, remember that this is where marketers can look to convert their content into action with the customer.

While templates are helpful, seeing a case study in action can also be a great way to learn. Here are some examples of how Adobe customers have experienced success.

Juniper Networks

One example is the Adobe and Juniper Networks case study , which puts the reader in the customer’s shoes. The beginning of the story quickly orients the reader so that they know exactly who the article is about and what they were trying to achieve. Solutions are outlined in a way that shows Adobe Experience Manager is the best choice and a natural fit for the customer. Along the way, quotes from the client are incorporated to help add validity to the statements. The results in the case study are conveyed with clear evidence of scale and volume using tangible data.

The story of Lenovo’s journey with Adobe is one that spans years of planning, implementation, and rollout. The Lenovo case study does a great job of consolidating all of this into a relatable journey that other enterprise organizations can see themselves taking, despite the project size. This case study also features descriptive headers and compelling visual elements that engage the reader and strengthen the content.

Tata Consulting

When it comes to using data to show customer results, this case study does an excellent job of conveying details and numbers in an easy-to-digest manner. Bullet points at the start break up the content while also helping the reader understand exactly what the case study will be about. Tata Consulting used Adobe to deliver elevated, engaging content experiences for a large telecommunications client of its own — an objective that’s relatable for a lot of companies.

Case studies are a vital tool for any marketing team as they enable you to demonstrate the value of your company’s products and services to others. They help marketers do their job and add credibility to a brand trying to promote its solutions by using the experiences and stories of real customers.

When you’re ready to get started with a case study:

• Think about a few goals you’d like to accomplish with your content.
• Make a list of successful clients that would be strong candidates for a case study.
• Reach out to the client to get their approval and conduct an interview.
• Gather the data to present an engaging and effective customer story.

Adobe can help

There are several Adobe products that can help you craft compelling case studies. Adobe Experience Platform helps you collect data and deliver great customer experiences across every channel. Once you’ve created your case studies, Experience Platform will help you deliver the right information to the right customer at the right time for maximum impact.

To learn more, watch the Adobe Experience Platform story .

Keep in mind that the best case studies are backed by data. That’s where Adobe Real-Time Customer Data Platform and Adobe Analytics come into play. With Real-Time CDP, you can gather the data you need to build a great case study and target specific customers to deliver the content to the right audience at the perfect moment.

Watch the Real-Time CDP overview video to learn more.

Finally, Adobe Analytics turns real-time data into real-time insights. It helps your business collect and synthesize data from multiple platforms to make more informed decisions and create the best case study possible.

Request a demo to learn more about Adobe Analytics.

https://business.adobe.com/blog/perspectives/b2b-ecommerce-10-case-studies-inspire-you

https://business.adobe.com/blog/basics/business-case

https://business.adobe.com/blog/basics/what-is-real-time-analytics

How to Write a Case Study: Bookmarkable Guide & Template

Published: November 30, 2023

Earning the trust of prospective customers can be a struggle. Before you can even begin to expect to earn their business, you need to demonstrate your ability to deliver on what your product or service promises.

Sure, you could say that you're great at X or that you're way ahead of the competition when it comes to Y. But at the end of the day, what you really need to win new business is cold, hard proof.

One of the best ways to prove your worth is through a compelling case study. In fact, HubSpot’s 2020 State of Marketing report found that case studies are so compelling that they are the fifth most commonly used type of content used by marketers.

Below, I'll walk you through what a case study is, how to prepare for writing one, what you need to include in it, and how it can be an effective tactic. To jump to different areas of this post, click on the links below to automatically scroll.

Case Study Definition

Case study templates, how to write a case study.

• How to Format a Case Study

Business Case Study Examples

A case study is a specific challenge a business has faced, and the solution they've chosen to solve it. Case studies can vary greatly in length and focus on several details related to the initial challenge and applied solution, and can be presented in various forms like a video, white paper, blog post, etc.

In professional settings, it's common for a case study to tell the story of a successful business partnership between a vendor and a client. Perhaps the success you're highlighting is in the number of leads your client generated, customers closed, or revenue gained. Any one of these key performance indicators (KPIs) are examples of your company's services in action.

When done correctly, these examples of your work can chronicle the positive impact your business has on existing or previous customers and help you attract new clients.

Free Case Study Templates

Showcase your company's success using these three free case study templates.

• Data-Driven Case Study Template
• Product-Specific Case Study Template
• General Case Study Template

You're all set!

Click this link to access this resource at any time.

Why write a case study? 

I know, you’re thinking “ Okay, but why do I need to write one of these? ” The truth is that while case studies are a huge undertaking, they are powerful marketing tools that allow you to demonstrate the value of your product to potential customers using real-world examples. Here are a few reasons why you should write case studies. 

1. Explain Complex Topics or Concepts

Case studies give you the space to break down complex concepts, ideas, and strategies and show how they can be applied in a practical way. You can use real-world examples, like an existing client, and use their story to create a compelling narrative that shows how your product solved their issue and how those strategies can be repeated to help other customers get similar successful results.  

2. Show Expertise

Case studies are a great way to demonstrate your knowledge and expertise on a given topic or industry. This is where you get the opportunity to show off your problem-solving skills and how you’ve generated successful outcomes for clients you’ve worked with. 

3. Build Trust and Credibility

In addition to showing off the attributes above, case studies are an excellent way to build credibility. They’re often filled with data and thoroughly researched, which shows readers you’ve done your homework. They can have confidence in the solutions you’ve presented because they’ve read through as you’ve explained the problem and outlined step-by-step what it took to solve it. All of these elements working together enable you to build trust with potential customers.

4. Create Social Proof

Using existing clients that have seen success working with your brand builds social proof . People are more likely to choose your brand if they know that others have found success working with you. Case studies do just that — putting your success on display for potential customers to see. 

All of these attributes work together to help you gain more clients. Plus you can even use quotes from customers featured in these studies and repurpose them in other marketing content. Now that you know more about the benefits of producing a case study, let’s check out how long these documents should be. 

How long should a case study be?

The length of a case study will vary depending on the complexity of the project or topic discussed. However, as a general guideline, case studies typically range from 500 to 1,500 words. 

Whatever length you choose, it should provide a clear understanding of the challenge, the solution you implemented, and the results achieved. This may be easier said than done, but it's important to strike a balance between providing enough detail to make the case study informative and concise enough to keep the reader's interest.

The primary goal here is to effectively communicate the key points and takeaways of the case study. It’s worth noting that this shouldn’t be a wall of text. Use headings, subheadings, bullet points, charts, and other graphics to break up the content and make it more scannable for readers. We’ve also seen brands incorporate video elements into case studies listed on their site for a more engaging experience. 

Ultimately, the length of your case study should be determined by the amount of information necessary to convey the story and its impact without becoming too long. Next, let’s look at some templates to take the guesswork out of creating one. 

To help you arm your prospects with information they can trust, we've put together a step-by-step guide on how to create effective case studies for your business with free case study templates for creating your own.

Tell us a little about yourself below to gain access today:

And to give you more options, we’ll highlight some useful templates that serve different needs. But remember, there are endless possibilities when it comes to demonstrating the work your business has done.

1. General Case Study Template

Do you have a specific product or service that you’re trying to sell, but not enough reviews or success stories? This Product Specific case study template will help.

This template relies less on metrics, and more on highlighting the customer’s experience and satisfaction. As you follow the template instructions, you’ll be prompted to speak more about the benefits of the specific product, rather than your team’s process for working with the customer.

4. Bold Social Media Business Case Study Template

You can find templates that represent different niches, industries, or strategies that your business has found success in — like a bold social media business case study template.

In this template, you can tell the story of how your social media marketing strategy has helped you or your client through collaboration or sale of your service. Customize it to reflect the different marketing channels used in your business and show off how well your business has been able to boost traffic, engagement, follows, and more.

5. Lead Generation Business Case Study Template

It’s important to note that not every case study has to be the product of a sale or customer story, sometimes they can be informative lessons that your own business has experienced. A great example of this is the Lead Generation Business case study template.

If you’re looking to share operational successes regarding how your team has improved processes or content, you should include the stories of different team members involved, how the solution was found, and how it has made a difference in the work your business does.

Now that we’ve discussed different templates and ideas for how to use them, let’s break down how to create your own case study with one.

• Get started with case study templates.
• Determine the case study's objective.
• Establish a case study medium.
• Find the right case study candidate.
• Contact your candidate for permission to write about them.
• Ensure you have all the resources you need to proceed once you get a response.
• Download a case study email template.
• Define the process you want to follow with the client.
• Ensure you're asking the right questions.
• Layout your case study format.
• Publish and promote your case study.

1. Get started with case study templates.

Telling your customer's story is a delicate process — you need to highlight their success while naturally incorporating your business into their story.

If you're just getting started with case studies, we recommend you download HubSpot's Case Study Templates we mentioned before to kickstart the process.

2. Determine the case study's objective.

All business case studies are designed to demonstrate the value of your services, but they can focus on several different client objectives.

Your first step when writing a case study is to determine the objective or goal of the subject you're featuring. In other words, what will the client have succeeded in doing by the end of the piece?

The client objective you focus on will depend on what you want to prove to your future customers as a result of publishing this case study.

Your case study can focus on one of the following client objectives:

• Complying with government regulation
• Lowering business costs
• Becoming profitable
• Generating more leads
• Closing on more customers
• Generating more revenue
• Expanding into a new market
• Becoming more sustainable or energy-efficient

3. Establish a case study medium.

Next, you'll determine the medium in which you'll create the case study. In other words, how will you tell this story?

Case studies don't have to be simple, written one-pagers. Using different media in your case study can allow you to promote your final piece on different channels. For example, while a written case study might just live on your website and get featured in a Facebook post, you can post an infographic case study on Pinterest and a video case study on your YouTube channel.

Here are some different case study mediums to consider:

Written Case Study

Consider writing this case study in the form of an ebook and converting it to a downloadable PDF. Then, gate the PDF behind a landing page and form for readers to fill out before downloading the piece, allowing this case study to generate leads for your business.

Video Case Study

Plan on meeting with the client and shooting an interview. Seeing the subject, in person, talk about the service you provided them can go a long way in the eyes of your potential customers.

Infographic Case Study

Use the long, vertical format of an infographic to tell your success story from top to bottom. As you progress down the infographic, emphasize major KPIs using bigger text and charts that show the successes your client has had since working with you.

Podcast Case Study

Podcasts are a platform for you to have a candid conversation with your client. This type of case study can sound more real and human to your audience — they'll know the partnership between you and your client was a genuine success.

4. Find the right case study candidate.

Writing about your previous projects requires more than picking a client and telling a story. You need permission, quotes, and a plan. To start, here are a few things to look for in potential candidates.

Product Knowledge

It helps to select a customer who's well-versed in the logistics of your product or service. That way, he or she can better speak to the value of what you offer in a way that makes sense for future customers.

Remarkable Results

Clients that have seen the best results are going to make the strongest case studies. If their own businesses have seen an exemplary ROI from your product or service, they're more likely to convey the enthusiasm that you want prospects to feel, too.

One part of this step is to choose clients who have experienced unexpected success from your product or service. When you've provided non-traditional customers — in industries that you don't usually work with, for example — with positive results, it can help to remove doubts from prospects.

Recognizable Names

While small companies can have powerful stories, bigger or more notable brands tend to lend credibility to your own. In fact, 89% of consumers say they'll buy from a brand they already recognize over a competitor, especially if they already follow them on social media.

Customers that came to you after working with a competitor help highlight your competitive advantage and might even sway decisions in your favor.

5. Contact your candidate for permission to write about them.

To get the case study candidate involved, you have to set the stage for clear and open communication. That means outlining expectations and a timeline right away — not having those is one of the biggest culprits in delayed case study creation.

Most importantly at this point, however, is getting your subject's approval. When first reaching out to your case study candidate, provide them with the case study's objective and format — both of which you will have come up with in the first two steps above.

To get this initial permission from your subject, put yourself in their shoes — what would they want out of this case study? Although you're writing this for your own company's benefit, your subject is far more interested in the benefit it has for them.

Benefits to Offer Your Case Study Candidate

Here are four potential benefits you can promise your case study candidate to gain their approval.

Brand Exposure

Explain to your subject to whom this case study will be exposed, and how this exposure can help increase their brand awareness both in and beyond their own industry. In the B2B sector, brand awareness can be hard to collect outside one's own market, making case studies particularly useful to a client looking to expand their name's reach.

Employee Exposure

Allow your subject to provide quotes with credits back to specific employees. When this is an option for them, their brand isn't the only thing expanding its reach — their employees can get their name out there, too. This presents your subject with networking and career development opportunities they might not have otherwise.

Product Discount

This is a more tangible incentive you can offer your case study candidate, especially if they're a current customer of yours. If they agree to be your subject, offer them a product discount — or a free trial of another product — as a thank-you for their help creating your case study.

Backlinks and Website Traffic

Here's a benefit that is sure to resonate with your subject's marketing team: If you publish your case study on your website, and your study links back to your subject's website — known as a "backlink" — this small gesture can give them website traffic from visitors who click through to your subject's website.

Additionally, a backlink from you increases your subject's page authority in the eyes of Google. This helps them rank more highly in search engine results and collect traffic from readers who are already looking for information about their industry.

6. Ensure you have all the resources you need to proceed once you get a response.

So you know what you’re going to offer your candidate, it’s time that you prepare the resources needed for if and when they agree to participate, like a case study release form and success story letter.

Let's break those two down.

Case Study Release Form

This document can vary, depending on factors like the size of your business, the nature of your work, and what you intend to do with the case studies once they are completed. That said, you should typically aim to include the following in the Case Study Release Form:

• A clear explanation of why you are creating this case study and how it will be used.
• A statement defining the information and potentially trademarked information you expect to include about the company — things like names, logos, job titles, and pictures.
• An explanation of what you expect from the participant, beyond the completion of the case study. For example, is this customer willing to act as a reference or share feedback, and do you have permission to pass contact information along for these purposes?
• A note about compensation.

Success Story Letter

As noted in the sample email, this document serves as an outline for the entire case study process. Other than a brief explanation of how the customer will benefit from case study participation, you'll want to be sure to define the following steps in the Success Story Letter.

7. Download a case study email template.

While you gathered your resources, your candidate has gotten time to read over the proposal. When your candidate approves of your case study, it's time to send them a release form.

A case study release form tells you what you'll need from your chosen subject, like permission to use any brand names and share the project information publicly. Kick-off this process with an email that runs through exactly what they can expect from you, as well as what you need from them. To give you an idea of what that might look like, check out this sample email:

8. Define the process you want to follow with the client.

Before you can begin the case study, you have to have a clear outline of the case study process with your client. An example of an effective outline would include the following information.

The Acceptance

First, you'll need to receive internal approval from the company's marketing team. Once approved, the Release Form should be signed and returned to you. It's also a good time to determine a timeline that meets the needs and capabilities of both teams.

The Questionnaire

To ensure that you have a productive interview — which is one of the best ways to collect information for the case study — you'll want to ask the participant to complete a questionnaire before this conversation. That will provide your team with the necessary foundation to organize the interview, and get the most out of it.

The Interview

Once the questionnaire is completed, someone on your team should reach out to the participant to schedule a 30- to 60-minute interview, which should include a series of custom questions related to the customer's experience with your product or service.

The Draft Review

After the case study is composed, you'll want to send a draft to the customer, allowing an opportunity to give you feedback and edits.

The Final Approval

Once any necessary edits are completed, send a revised copy of the case study to the customer for final approval.

Once the case study goes live — on your website or elsewhere — it's best to contact the customer with a link to the page where the case study lives. Don't be afraid to ask your participants to share these links with their own networks, as it not only demonstrates your ability to deliver positive results and impressive growth, as well.

9. Ensure you're asking the right questions.

Before you execute the questionnaire and actual interview, make sure you're setting yourself up for success. A strong case study results from being prepared to ask the right questions. What do those look like? Here are a few examples to get you started:

• What are your goals?
• What challenges were you experiencing before purchasing our product or service?
• What made our product or service stand out against our competitors?
• What did your decision-making process look like?
• How have you benefited from using our product or service? (Where applicable, always ask for data.)

Keep in mind that the questionnaire is designed to help you gain insights into what sort of strong, success-focused questions to ask during the actual interview. And once you get to that stage, we recommend that you follow the "Golden Rule of Interviewing." Sounds fancy, right? It's actually quite simple — ask open-ended questions.

If you're looking to craft a compelling story, "yes" or "no" answers won't provide the details you need. Focus on questions that invite elaboration, such as, "Can you describe ...?" or, "Tell me about ..."

In terms of the interview structure, we recommend categorizing the questions and flowing them into six specific sections that will mirror a successful case study format. Combined, they'll allow you to gather enough information to put together a rich, comprehensive study.

Open with the customer's business.

The goal of this section is to generate a better understanding of the company's current challenges and goals, and how they fit into the landscape of their industry. Sample questions might include:

• How long have you been in business?
• How many employees do you have?
• What are some of the objectives of your department at this time?

Cite a problem or pain point.

To tell a compelling story, you need context. That helps match the customer's need with your solution. Sample questions might include:

• What challenges and objectives led you to look for a solution?
• What might have happened if you did not identify a solution?
• Did you explore other solutions before this that did not work out? If so, what happened?

Discuss the decision process.

Exploring how the customer decided to work with you helps to guide potential customers through their own decision-making processes. Sample questions might include:

• How did you hear about our product or service?
• Who was involved in the selection process?
• What was most important to you when evaluating your options?

Explain how a solution was implemented.

The focus here should be placed on the customer's experience during the onboarding process. Sample questions might include:

• How long did it take to get up and running?
• Did that meet your expectations?
• Who was involved in the process?

Explain how the solution works.

The goal of this section is to better understand how the customer is using your product or service. Sample questions might include:

• Is there a particular aspect of the product or service that you rely on most?
• Who is using the product or service?

End with the results.

In this section, you want to uncover impressive measurable outcomes — the more numbers, the better. Sample questions might include:

• How is the product or service helping you save time and increase productivity?
• In what ways does that enhance your competitive advantage?
• How much have you increased metrics X, Y, and Z?

10. Lay out your case study format.

When it comes time to take all of the information you've collected and actually turn it into something, it's easy to feel overwhelmed. Where should you start? What should you include? What's the best way to structure it?

To help you get a handle on this step, it's important to first understand that there is no one-size-fits-all when it comes to the ways you can present a case study. They can be very visual, which you'll see in some of the examples we've included below, and can sometimes be communicated mostly through video or photos, with a bit of accompanying text.

Here are the sections we suggest, which we'll cover in more detail down below:

• Title: Keep it short. Develop a succinct but interesting project name you can give the work you did with your subject.
• Subtitle: Use this copy to briefly elaborate on the accomplishment. What was done? The case study itself will explain how you got there.
• Executive Summary : A 2-4 sentence summary of the entire story. You'll want to follow it with 2-3 bullet points that display metrics showcasing success.
• About the Subject: An introduction to the person or company you served, which can be pulled from a LinkedIn Business profile or client website.
• Challenges and Objectives: A 2-3 paragraph description of the customer's challenges, before using your product or service. This section should also include the goals or objectives the customer set out to achieve.
• How Product/Service Helped: A 2-3 paragraph section that describes how your product or service provided a solution to their problem.
• Results: A 2-3 paragraph testimonial that proves how your product or service specifically benefited the person or company and helped achieve its goals. Include numbers to quantify your contributions.
• Supporting Visuals or Quotes: Pick one or two powerful quotes that you would feature at the bottom of the sections above, as well as a visual that supports the story you are telling.
• Future Plans: Everyone likes an epilogue. Comment on what's ahead for your case study subject, whether or not those plans involve you.
• Call to Action (CTA): Not every case study needs a CTA, but putting a passive one at the end of your case study can encourage your readers to take an action on your website after learning about the work you've done.

When laying out your case study, focus on conveying the information you've gathered in the most clear and concise way possible. Make it easy to scan and comprehend, and be sure to provide an attractive call-to-action at the bottom — that should provide readers an opportunity to learn more about your product or service.

11. Publish and promote your case study.

Once you've completed your case study, it's time to publish and promote it. Some case study formats have pretty obvious promotional outlets — a video case study can go on YouTube, just as an infographic case study can go on Pinterest.

But there are still other ways to publish and promote your case study. Here are a couple of ideas:

Lead Gen in a Blog Post

As stated earlier in this article, written case studies make terrific lead-generators if you convert them into a downloadable format, like a PDF. To generate leads from your case study, consider writing a blog post that tells an abbreviated story of your client's success and asking readers to fill out a form with their name and email address if they'd like to read the rest in your PDF.

Then, promote this blog post on social media, through a Facebook post or a tweet.

Published as a Page on Your Website

As a growing business, you might need to display your case study out in the open to gain the trust of your target audience.

Rather than gating it behind a landing page, publish your case study to its own page on your website, and direct people here from your homepage with a "Case Studies" or "Testimonials" button along your homepage's top navigation bar.

Format for a Case Study

The traditional case study format includes the following parts: a title and subtitle, a client profile, a summary of the customer’s challenges and objectives, an account of how your solution helped, and a description of the results. You might also want to include supporting visuals and quotes, future plans, and calls-to-action.

Image Source

The title is one of the most important parts of your case study. It should draw readers in while succinctly describing the potential benefits of working with your company. To that end, your title should:

• State the name of your custome r. Right away, the reader must learn which company used your products and services. This is especially important if your customer has a recognizable brand. If you work with individuals and not companies, you may omit the name and go with professional titles: “A Marketer…”, “A CFO…”, and so forth.
• State which product your customer used . Even if you only offer one product or service, or if your company name is the same as your product name, you should still include the name of your solution. That way, readers who are not familiar with your business can become aware of what you sell.
• Allude to the results achieved . You don’t necessarily need to provide hard numbers, but the title needs to represent the benefits, quickly. That way, if a reader doesn’t stay to read, they can walk away with the most essential information: Your product works.

The example above, “Crunch Fitness Increases Leads and Signups With HubSpot,” achieves all three — without being wordy. Keeping your title short and sweet is also essential.

2. Subtitle

Your subtitle is another essential part of your case study — don’t skip it, even if you think you’ve done the work with the title. In this section, include a brief summary of the challenges your customer was facing before they began to use your products and services. Then, drive the point home by reiterating the benefits your customer experienced by working with you.

The above example reads:

“Crunch Fitness was franchising rapidly when COVID-19 forced fitness clubs around the world to close their doors. But the company stayed agile by using HubSpot to increase leads and free trial signups.”

We like that the case study team expressed the urgency of the problem — opening more locations in the midst of a pandemic — and placed the focus on the customer’s ability to stay agile.

3. Executive Summary

The executive summary should provide a snapshot of your customer, their challenges, and the benefits they enjoyed from working with you. Think it’s too much? Think again — the purpose of the case study is to emphasize, again and again, how well your product works.

The good news is that depending on your design, the executive summary can be mixed with the subtitle or with the “About the Company” section. Many times, this section doesn’t need an explicit “Executive Summary” subheading. You do need, however, to provide a convenient snapshot for readers to scan.

In the above example, ADP included information about its customer in a scannable bullet-point format, then provided two sections: “Business Challenge” and “How ADP Helped.” We love how simple and easy the format is to follow for those who are unfamiliar with ADP or its typical customer.

4. About the Company

Readers need to know and understand who your customer is. This is important for several reasons: It helps your reader potentially relate to your customer, it defines your ideal client profile (which is essential to deter poor-fit prospects who might have reached out without knowing they were a poor fit), and it gives your customer an indirect boon by subtly promoting their products and services.

Feel free to keep this section as simple as possible. You can simply copy and paste information from the company’s LinkedIn, use a quote directly from your customer, or take a more creative storytelling approach.

In the above example, HubSpot included one paragraph of description for Crunch Fitness and a few bullet points. Below, ADP tells the story of its customer using an engaging, personable technique that effectively draws readers in.

5. Challenges and Objectives

The challenges and objectives section of your case study is the place to lay out, in detail, the difficulties your customer faced prior to working with you — and what they hoped to achieve when they enlisted your help.

In this section, you can be as brief or as descriptive as you’d like, but remember: Stress the urgency of the situation. Don’t understate how much your customer needed your solution (but don’t exaggerate and lie, either). Provide contextual information as necessary. For instance, the pandemic and societal factors may have contributed to the urgency of the need.

Take the above example from design consultancy IDEO:

“Educational opportunities for adults have become difficult to access in the United States, just when they’re needed most. To counter this trend, IDEO helped the city of South Bend and the Drucker Institute launch Bendable, a community-powered platform that connects people with opportunities to learn with and from each other.”

We love how IDEO mentions the difficulties the United States faces at large, the efforts its customer is taking to address these issues, and the steps IDEO took to help.

6. How Product/Service Helped

This is where you get your product or service to shine. Cover the specific benefits that your customer enjoyed and the features they gleaned the most use out of. You can also go into detail about how you worked with and for your customer. Maybe you met several times before choosing the right solution, or you consulted with external agencies to create the best package for them.

Whatever the case may be, try to illustrate how easy and pain-free it is to work with the representatives at your company. After all, potential customers aren’t looking to just purchase a product. They’re looking for a dependable provider that will strive to exceed their expectations.

In the above example, IDEO describes how it partnered with research institutes and spoke with learners to create Bendable, a free educational platform. We love how it shows its proactivity and thoroughness. It makes potential customers feel that IDEO might do something similar for them.

The results are essential, and the best part is that you don’t need to write the entirety of the case study before sharing them. Like HubSpot, IDEO, and ADP, you can include the results right below the subtitle or executive summary. Use data and numbers to substantiate the success of your efforts, but if you don’t have numbers, you can provide quotes from your customers.

We can’t overstate the importance of the results. In fact, if you wanted to create a short case study, you could include your title, challenge, solution (how your product helped), and result.

8. Supporting Visuals or Quotes

Let your customer speak for themselves by including quotes from the representatives who directly interfaced with your company.

Visuals can also help, even if they’re stock images. On one side, they can help you convey your customer’s industry, and on the other, they can indirectly convey your successes. For instance, a picture of a happy professional — even if they’re not your customer — will communicate that your product can lead to a happy client.

In this example from IDEO, we see a man standing in a boat. IDEO’s customer is neither the man pictured nor the manufacturer of the boat, but rather Conservation International, an environmental organization. This imagery provides a visually pleasing pattern interrupt to the page, while still conveying what the case study is about.

9. Future Plans

This is optional, but including future plans can help you close on a more positive, personable note than if you were to simply include a quote or the results. In this space, you can show that your product will remain in your customer’s tech stack for years to come, or that your services will continue to be instrumental to your customer’s success.

Alternatively, if you work only on time-bound projects, you can allude to the positive impact your customer will continue to see, even after years of the end of the contract.

10. Call to Action (CTA)

Not every case study needs a CTA, but we’d still encourage it. Putting one at the end of your case study will encourage your readers to take an action on your website after learning about the work you've done.

It will also make it easier for them to reach out, if they’re ready to start immediately. You don’t want to lose business just because they have to scroll all the way back up to reach out to your team.

To help you visualize this case study outline, check out the case study template below, which can also be downloaded here .

You drove the results, made the connection, set the expectations, used the questionnaire to conduct a successful interview, and boiled down your findings into a compelling story. And after all of that, you're left with a little piece of sales enabling gold — a case study.

To show you what a well-executed final product looks like, have a look at some of these marketing case study examples.

1. "Shopify Uses HubSpot CRM to Transform High Volume Sales Organization," by HubSpot

What's interesting about this case study is the way it leads with the customer. This reflects a major HubSpot value, which is to always solve for the customer first. The copy leads with a brief description of why Shopify uses HubSpot and is accompanied by a short video and some basic statistics on the company.

Notice that this case study uses mixed media. Yes, there is a short video, but it's elaborated upon in the additional text on the page. So, while case studies can use one or the other, don't be afraid to combine written copy with visuals to emphasize the project's success.

2. "New England Journal of Medicine," by Corey McPherson Nash

When branding and design studio Corey McPherson Nash showcases its work, it makes sense for it to be visual — after all, that's what they do. So in building the case study for the studio's work on the New England Journal of Medicine's integrated advertising campaign — a project that included the goal of promoting the client's digital presence — Corey McPherson Nash showed its audience what it did, rather than purely telling it.

Notice that the case study does include some light written copy — which includes the major points we've suggested — but lets the visuals do the talking, allowing users to really absorb the studio's services.

3. "Designing the Future of Urban Farming," by IDEO

Here's a design company that knows how to lead with simplicity in its case studies. As soon as the visitor arrives at the page, he or she is greeted with a big, bold photo, and two very simple columns of text — "The Challenge" and "The Outcome."

Immediately, IDEO has communicated two of the case study's major pillars. And while that's great — the company created a solution for vertical farming startup INFARM's challenge — it doesn't stop there. As the user scrolls down, those pillars are elaborated upon with comprehensive (but not overwhelming) copy that outlines what that process looked like, replete with quotes and additional visuals.

4. "Secure Wi-Fi Wins Big for Tournament," by WatchGuard

Then, there are the cases when visuals can tell almost the entire story — when executed correctly. Network security provider WatchGuard can do that through this video, which tells the story of how its services enhanced the attendee and vendor experience at the Windmill Ultimate Frisbee tournament.

5. Rock and Roll Hall of Fame Boosts Social Media Engagement and Brand Awareness with HubSpot

In the case study above , HubSpot uses photos, videos, screenshots, and helpful stats to tell the story of how the Rock and Roll Hall of Fame used the bot, CRM, and social media tools to gain brand awareness.

6. Small Desk Plant Business Ups Sales by 30% With Trello

This case study from Trello is straightforward and easy to understand. It begins by explaining the background of the company that decided to use it, what its goals were, and how it planned to use Trello to help them.

It then goes on to discuss how the software was implemented and what tasks and teams benefited from it. Towards the end, it explains the sales results that came from implementing the software and includes quotes from decision-makers at the company that implemented it.

7. Facebook's Mercedes Benz Success Story

Facebook's Success Stories page hosts a number of well-designed and easy-to-understand case studies that visually and editorially get to the bottom line quickly.

Each study begins with key stats that draw the reader in. Then it's organized by highlighting a problem or goal in the introduction, the process the company took to reach its goals, and the results. Then, in the end, Facebook notes the tools used in the case study.

Showcasing Your Work

You work hard at what you do. Now, it's time to show it to the world — and, perhaps more important, to potential customers. Before you show off the projects that make you the proudest, we hope you follow these important steps that will help you effectively communicate that work and leave all parties feeling good about it.

Editor's Note: This blog post was originally published in February 2017 but was updated for comprehensiveness and freshness in July 2021.

Don't forget to share this post!

Related articles.

How to Market an Ebook: 21 Ways to Promote Your Content Offers

7 Pieces of Content Your Audience Really Wants to See [New Data]

How to Write a Listicle [+ Examples and Ideas]

28 Case Study Examples Every Marketer Should See

What Is a White Paper? [FAQs]

What is an Advertorial? 8 Examples to Help You Write One

How to Create Marketing Offers That Don't Fall Flat

20 Creative Ways To Repurpose Content

16 Important Ways to Use Case Studies in Your Marketing

11 Ways to Make Your Blog Post Interactive

Showcase your company's success using these free case study templates.

Marketing software that helps you drive revenue, save time and resources, and measure and optimize your investments — all on one easy-to-use platform

What to Include in a Case Study: Layout, Content & Visuals

Learn what info to include in a business case study and how to structure it for maximum conversion, and see real-life examples and templates.

Dominika Krukowska

9 minute read

Short answer

What to include in a case study?

A successful case study should include the following elements:

• Introduction (what was the problem and how it was solved in 1-2 sentences)
• Client overview
• The problem or challenge
• How they solved their problem (with your solution)
• Customer quotes and testimonials

For a case study to work all critical components must be in place.

Case studies can be gold mines for conversions, but extracting that gold isn't as straightforward as it seems.

What goes into a case study that tells a compelling story and draws your prospects down the conversion funnel?

There are some critical elements that you must include in your case study if you hope to generate conversions.

Yes, you read that right— making a partial case study could very well mean leaving money on the table.

In this post, I’ll share with you the secrets to creating a case study that’ll turn it from ‘blah’ to ‘bingo’.

You’ll learn what you must include in your case study to convert readers into buyers.

Let’s go!

What to include in your case study structure?

Crafting your case study is like writing a gripping novel, filled with characters, conflicts, and resolutions. Each component of your case study serves a unique purpose in narrating the story of how your product or service helps your clients conquer their challenges.

Here are the main chapters of your case study structure:

1. Introduction

Think of the introduction as your story's opening scene. It's your first impression, your initial hook, the gateway to the world you're about to unfold. Here, you aim to spark curiosity and give your reader a taste of the journey ahead.

How to create an introduction slide:

Include a video —this will get 32% more people to interact with your case study .

Create an opening line that instantly hooks your reader —think surprising statistics, bold statements, or intriguing questions.

Introduce the central theme of your case study —what's the big challenge or opportunity at play?

Connect with the reader's pain points to foster engagement right from the start.

Here’s an example of an introduction slide that hooks attention:

2. Company overview

Here, you introduce your main hero—your client. You want to provide a clear and relatable backdrop that helps your audience understand who your client is, what they do, and what stakes are at play for them.

How to create a company overview slide:

Offer key details about the client's business —what's their industry? What's their market position?

Highlight the client's aspirations and values —this helps to humanize the company and build emotional connection.

Make sure to relate the company's context back to your reader. How does this company's situation reflect the challenges or opportunities your reader might face?

Here’s an example of a company overview slide:

3. The problem or challenge

This is the conflict that propels your story. It's the mountain your client needs to climb, the dragon they must slay. Without a significant problem or challenge, there's no tension, and without tension, there's no story and no engagement.

How to create a problem slide:

Clearly articulate the problem or challenge. Make it tangible and relatable.

Explore the implications of this problem. What's at stake for the client if it goes unresolved?

Aim to evoke emotion here. The more your reader feels the weight of the problem, the more invested they'll be in the solution.

Here’s an example of a problem slide:

4. Your solution

Enter the trusted guide and confidant—your product or service. This is the pivotal moment where your client's fortunes begin to turn. Show how your offering comes into play, lighting the way toward resolution.

How to create a solution slide:

Detail how your solution addresses the client's problem. Show how the features of your product or service connect to the challenges at hand.

Walk your reader through the implementation process. Offer insights into the collaborative efforts and innovative approaches that made the difference.

Don’t shy away from any obstacles or setbacks that occurred during the solution phase. Showing how you overcame these can actually make your story more credible and relatable.

Here’s an example of a solution slide:

This is the climax of your story, where all the tension that's been built up finally gets released. You need to demonstrate the transformation that occurred as a result of your solution.

How to create a results slide:

Show, don't tell. Use numbers, stats, and graphs to make your results concrete and impactful.

Discuss not just quantitative, but also qualitative results. How did your solution affect the client's morale, their customer satisfaction, their market reputation? Give detailed examples set in short anecdotes as experienced by a person (not an organization).

A side-by-side comparison of the 'before' and 'after' can be a powerful visual aid to highlight your impact.

Here’s an example of a results slide:

6. Customer quotes/testimonials

Nothing reinforces a story better than having the hero vouch for its authenticity. Direct quotes from your client add depth, credibility, and emotional resonance to your case study.

How to create a testimonials slide:

Select quotes that reinforce the narrative of your case study.

The more genuine and heartfelt, the better. Authenticity speaks volumes.

Consider sprinkling testimonials throughout the case study rather than bunching them together to keep the reader engaged.

Here’s an example of a testimonials slide:

7. Next steps

Your story doesn’t end when the problem is solved. This is where you guide your reader toward the future, inspiring them to take action based on the journey they've just been through.

How to create a next steps slide:

Provide clear and compelling calls-to-action. What do you want the reader to do next? Download a whitepaper? Request a demo? Sign up and try your solution? Make it a small concession, not a big ask. The next reasonable action they can take to establish the relationship a tiny bit further.

Make it simple for readers to take the next step. Include links, contact information, or even embed your calendar into the case study.

Here’s an example of a next steps slide:

What storytelling elements to include in a case study?

Compelling storytelling is an art, and when applied to business case studies, it can turn a rather dry piece of data into a riveting tale of success.

It's a chance to illustrate your value proposition in the real world, giving prospective clients a peek at what they could experience when they choose to work with you.

Here are some storytelling elements to include in your case study:

1. A clear storyline

Start with the basics: Who is your customer? What was their challenge? How did your product or service solve their problem? And, what was the outcome?

This forms the narrative arc of your case study, providing a backbone for your story. Ensure it’s a seamless narrative, taking the reader along a journey of transformation.

Here’s our recommended presentation storyline:

2. Concrete outcomes

Data provides the meat of your case study. Numbers, percentages, and concrete results serve as proof that your solution works.

It's one thing to claim that your product or service is effective, but showcasing the results achieved by a real customer through hard data adds credence to your assertions.

3. Visuals that support and expand on the text

Just as a picture is worth a thousand words, well-placed visuals in your case study can make the message clearer and more compelling.

Graphs, charts, and infographics can help break down complex data, making it easier for the audience to digest. Furthermore, they break up long blocks of text, making your case study more engaging.

4. Interactive elements

In a world where scrolling has become second nature, your case study needs to be more than a static document.

Incorporating interactive elements like tabs to click through benefits, live data calculators, or sliders with case studies and customer testimonials invites your audience to engage with your content actively.

Our research showed that decks with interactive elements got scrolled to the bottom 41% more often and had a 21% longer average reading time than non-interactive ones.

Making interactive case studies sounds complicated but it’s actually very easy if you do it with our AI case study creator . You can send it to prospects directly from Storydoc or embed it as part of your website.

By making your reader an active participant in the story, you boost their engagement and increase the chances of them reading your content through to the end.

Benefits of including interactive elements in your case study presentation

More decks read in full

Longer average reading time

5. Testimonials and quotes directly from customers

Customer testimonials and direct quotes inject a sense of authenticity and credibility into your case study.

They bring a human touch to your narrative and foster trust in potential clients.

It's no longer just your voice touting the effectiveness of your solution; it's the voice of a satisfied customer who has personally experienced the benefits of your product or service.

6. Clear call to action

Finally, after painting a vivid picture of your product or service in action, you need to tell your audience what to do next.

A clear CTA—whether it’s to learn more, book a demo, or sign up—makes the next step evident for your audience.

Our data reveals that decks with a clear next step had a conversion rate 27% higher than those that ended with a generic "thank you."

Make the next step simple, straightforward, and compelling, so your reader knows precisely what to do to start their own success story with you.

What not to include in your case study?

While we've covered the essentials to include in your case study, it's equally important to identify elements that could distract from your message, decrease trust, or even confuse your audience.

Here's what you should avoid including in your case study:

1. Unverified claims / data

Every claim you make and every piece of data you share in your case study must be true and easy to check.

Trust is crucial in a case study, and even one bit of wrong information can damage trust and hurt your image.

So, make sure all your facts, figures, and results are correct, and always get the right permissions to share them.

2. Confidential or sensitive information

When writing a case study, it's crucial to remember that privacy matters. Even though it's exciting to share all the details, you need to protect your client's private information.

Always get clear permission before using any client data and remember to hide any information that could identify specific individuals.

This careful approach shows your respect for privacy and builds trust with your audience, making your case study not just engaging, but also responsible and professional.

3. Technical jargon

A case study should be easy for everyone to understand, so avoid using industry-specific language. Even if you know the jargon, your audience might not.

Keeping your language simple and clear will help more people understand your case study. Too much technical language can confuse readers and distract from the story you're trying to tell.

4. Salesy language

While a case study is designed to show prospective clients how valuable your offer is, it's important not to sound too pushy.

A case study should tell a story, not sound like a sales pitch. Keep your language helpful and interesting. The success story should be enough to sell itself.

Create your best case study yet from ready-made templates

Now that you're equipped with all the essentials of crafting a compelling case study, it's time to bring your narrative to life.

Don’t work hard if you can work easy and get better results.

Interactive case study templates are your shortcut to creating engaging and informative case studies. They provide a clear path for your narrative, intuitive ways to present your data, and an engaging space for sharing customer testimonials.

Grab a template, and let your story do the talking!

Hi, I'm Dominika, Content Specialist at Storydoc. As a creative professional with experience in fashion, I'm here to show you how to amplify your brand message through the power of storytelling and eye-catching visuals.

Found this post useful?

Subscribe to our monthly newsletter.

Get notified as more awesome content goes live.

(No spam, no ads, opt-out whenever)

You've just joined an elite group of people that make the top performing 1% of sales and marketing collateral.

Create your best case study to date

Try Storydoc interactive case study creator for 14 days free (keep any presentation you make forever!)

All You Wanted to Know About How to Write a Case Study

What do you study in your college? If you are a psychology, sociology, or anthropology student, we bet you might be familiar with what a case study is. This research method is used to study a certain person, group, or situation. In this guide from our dissertation writing service , you will learn how to write a case study professionally, from researching to citing sources properly. Also, we will explore different types of case studies and show you examples — so that you won’t have any other questions left.

What Is a Case Study?

A case study is a subcategory of research design which investigates problems and offers solutions. Case studies can range from academic research studies to corporate promotional tools trying to sell an idea—their scope is quite vast.

What Is the Difference Between a Research Paper and a Case Study?

While research papers turn the reader’s attention to a certain problem, case studies go even further. Case study guidelines require students to pay attention to details, examining issues closely and in-depth using different research methods. For example, case studies may be used to examine court cases if you study Law, or a patient's health history if you study Medicine. Case studies are also used in Marketing, which are thorough, empirically supported analysis of a good or service's performance. Well-designed case studies can be valuable for prospective customers as they can identify and solve the potential customers pain point.

Case studies involve a lot of storytelling – they usually examine particular cases for a person or a group of people. This method of research is very helpful, as it is very practical and can give a lot of hands-on information. Most commonly, the length of the case study is about 500-900 words, which is much less than the length of an average research paper.

The structure of a case study is very similar to storytelling. It has a protagonist or main character, which in your case is actually a problem you are trying to solve. You can use the system of 3 Acts to make it a compelling story. It should have an introduction, rising action, a climax where transformation occurs, falling action, and a solution.

Here is a rough formula for you to use in your case study:

Problem (Act I): > Solution (Act II) > Result (Act III) > Conclusion.

Types of Case Studies

The purpose of a case study is to provide detailed reports on an event, an institution, a place, future customers, or pretty much anything. There are a few common types of case study, but the type depends on the topic. The following are the most common domains where case studies are needed:

• Historical case studies are great to learn from. Historical events have a multitude of source info offering different perspectives. There are always modern parallels where these perspectives can be applied, compared, and thoroughly analyzed.
• Problem-oriented case studies are usually used for solving problems. These are often assigned as theoretical situations where you need to immerse yourself in the situation to examine it. Imagine you’re working for a startup and you’ve just noticed a significant flaw in your product’s design. Before taking it to the senior manager, you want to do a comprehensive study on the issue and provide solutions. On a greater scale, problem-oriented case studies are a vital part of relevant socio-economic discussions.
• Cumulative case studies collect information and offer comparisons. In business, case studies are often used to tell people about the value of a product.
• Critical case studies explore the causes and effects of a certain case.
• Illustrative case studies describe certain events, investigating outcomes and lessons learned.

Need a compelling case study? EssayPro has got you covered. Our experts are ready to provide you with detailed, insightful case studies that capture the essence of real-world scenarios. Elevate your academic work with our professional assistance.

Case Study Format

The case study format is typically made up of eight parts:

• Executive Summary. Explain what you will examine in the case study. Write an overview of the field you’re researching. Make a thesis statement and sum up the results of your observation in a maximum of 2 sentences.
• Background. Provide background information and the most relevant facts. Isolate the issues.
• Case Evaluation. Isolate the sections of the study you want to focus on. In it, explain why something is working or is not working.
• Proposed Solutions. Offer realistic ways to solve what isn’t working or how to improve its current condition. Explain why these solutions work by offering testable evidence.
• Conclusion. Summarize the main points from the case evaluations and proposed solutions. 6. Recommendations. Talk about the strategy that you should choose. Explain why this choice is the most appropriate.
• Implementation. Explain how to put the specific strategies into action.
• References. Provide all the citations.

How to Write a Case Study

Let's discover how to write a case study.

Setting Up the Research

When writing a case study, remember that research should always come first. Reading many different sources and analyzing other points of view will help you come up with more creative solutions. You can also conduct an actual interview to thoroughly investigate the customer story that you'll need for your case study. Including all of the necessary research, writing a case study may take some time. The research process involves doing the following:

• Define your objective. Explain the reason why you’re presenting your subject. Figure out where you will feature your case study; whether it is written, on video, shown as an infographic, streamed as a podcast, etc.
• Determine who will be the right candidate for your case study. Get permission, quotes, and other features that will make your case study effective. Get in touch with your candidate to see if they approve of being part of your work. Study that candidate’s situation and note down what caused it.
• Identify which various consequences could result from the situation. Follow these guidelines on how to start a case study: surf the net to find some general information you might find useful.
• Make a list of credible sources and examine them. Seek out important facts and highlight problems. Always write down your ideas and make sure to brainstorm.
• Focus on several key issues – why they exist, and how they impact your research subject. Think of several unique solutions. Draw from class discussions, readings, and personal experience. When writing a case study, focus on the best solution and explore it in depth. After having all your research in place, writing a case study will be easy. You may first want to check the rubric and criteria of your assignment for the correct case study structure.

Read Also: ' WHAT IS A CREDIBLE SOURCES ?'

Although your instructor might be looking at slightly different criteria, every case study rubric essentially has the same standards. Your professor will want you to exhibit 8 different outcomes:

• Correctly identify the concepts, theories, and practices in the discipline.
• Identify the relevant theories and principles associated with the particular study.
• Evaluate legal and ethical principles and apply them to your decision-making.
• Recognize the global importance and contribution of your case.
• Construct a coherent summary and explanation of the study.
• Demonstrate analytical and critical-thinking skills.
• Explain the interrelationships between the environment and nature.
• Integrate theory and practice of the discipline within the analysis.

Need Case Study DONE FAST?

Pick a topic, tell us your requirements and get your paper on time.

Case Study Outline

Let's look at the structure of an outline based on the issue of the alcoholic addiction of 30 people.

Introduction

• Statement of the issue: Alcoholism is a disease rather than a weakness of character.
• Presentation of the problem: Alcoholism is affecting more than 14 million people in the USA, which makes it the third most common mental illness there.
• Explanation of the terms: In the past, alcoholism was commonly referred to as alcohol dependence or alcohol addiction. Alcoholism is now the more severe stage of this addiction in the disorder spectrum.
• Hypotheses: Drinking in excess can lead to the use of other drugs.
• Importance of your story: How the information you present can help people with their addictions.
• Background of the story: Include an explanation of why you chose this topic.
• Presentation of analysis and data: Describe the criteria for choosing 30 candidates, the structure of the interview, and the outcomes.
• Strong argument 1: ex. X% of candidates dealing with anxiety and depression...
• Strong argument 2: ex. X amount of people started drinking by their mid-teens.
• Strong argument 3: ex. X% of respondents’ parents had issues with alcohol.
• Concluding statement: I have researched if alcoholism is a disease and found out that…
• Recommendations: Ways and actions for preventing alcohol use.

Writing a Case Study Draft

After you’ve done your case study research and written the outline, it’s time to focus on the draft. In a draft, you have to develop and write your case study by using: the data which you collected throughout the research, interviews, and the analysis processes that were undertaken. Follow these rules for the draft:

• Your draft should contain at least 4 sections: an introduction; a body where you should include background information, an explanation of why you decided to do this case study, and a presentation of your main findings; a conclusion where you present data; and references.
• In the introduction, you should set the pace very clearly. You can even raise a question or quote someone you interviewed in the research phase. It must provide adequate background information on the topic. The background may include analyses of previous studies on your topic. Include the aim of your case here as well. Think of it as a thesis statement. The aim must describe the purpose of your work—presenting the issues that you want to tackle. Include background information, such as photos or videos you used when doing the research.
• Describe your unique research process, whether it was through interviews, observations, academic journals, etc. The next point includes providing the results of your research. Tell the audience what you found out. Why is this important, and what could be learned from it? Discuss the real implications of the problem and its significance in the world.
• Include quotes and data (such as findings, percentages, and awards). This will add a personal touch and better credibility to the case you present. Explain what results you find during your interviews in regards to the problem and how it developed. Also, write about solutions which have already been proposed by other people who have already written about this case.
• At the end of your case study, you should offer possible solutions, but don’t worry about solving them yourself.

Use Data to Illustrate Key Points in Your Case Study

Even though your case study is a story, it should be based on evidence. Use as much data as possible to illustrate your point. Without the right data, your case study may appear weak and the readers may not be able to relate to your issue as much as they should. Let's see the examples from essay writing service :

‍ With data: Alcoholism is affecting more than 14 million people in the USA, which makes it the third most common mental illness there. Without data: A lot of people suffer from alcoholism in the United States.

Try to include as many credible sources as possible. You may have terms or sources that could be hard for other cultures to understand. If this is the case, you should include them in the appendix or Notes for the Instructor or Professor.

Finalizing the Draft: Checklist

After you finish drafting your case study, polish it up by answering these ‘ask yourself’ questions and think about how to end your case study:

• Check that you follow the correct case study format, also in regards to text formatting.
• Check that your work is consistent with its referencing and citation style.
• Micro-editing — check for grammar and spelling issues.
• Macro-editing — does ‘the big picture’ come across to the reader? Is there enough raw data, such as real-life examples or personal experiences? Have you made your data collection process completely transparent? Does your analysis provide a clear conclusion, allowing for further research and practice?

Problems to avoid:

• Overgeneralization – Do not go into further research that deviates from the main problem.
• Failure to Document Limitations – Just as you have to clearly state the limitations of a general research study, you must describe the specific limitations inherent in the subject of analysis.
• Failure to Extrapolate All Possible Implications – Just as you don't want to over-generalize from your case study findings, you also have to be thorough in the consideration of all possible outcomes or recommendations derived from your findings.

How to Create a Title Page and Cite a Case Study

Let's see how to create an awesome title page.

Your title page depends on the prescribed citation format. The title page should include:

• A title that attracts some attention and describes your study
• The title should have the words “case study” in it
• The title should range between 5-9 words in length
• Your name and contact information
• Your finished paper should be only 500 to 1,500 words in length.With this type of assignment, write effectively and avoid fluff

Here is a template for the APA and MLA format title page:

There are some cases when you need to cite someone else's study in your own one – therefore, you need to master how to cite a case study. A case study is like a research paper when it comes to citations. You can cite it like you cite a book, depending on what style you need.

Citation Example in MLA ‍ Hill, Linda, Tarun Khanna, and Emily A. Stecker. HCL Technologies. Boston: Harvard Business Publishing, 2008. Print.

Citation Example in APA ‍ Hill, L., Khanna, T., & Stecker, E. A. (2008). HCL Technologies. Boston: Harvard Business Publishing.

Citation Example in Chicago Hill, Linda, Tarun Khanna, and Emily A. Stecker. HCL Technologies.

Case Study Examples

To give you an idea of a professional case study example, we gathered and linked some below.

Eastman Kodak Case Study

Case Study Example: Audi Trains Mexican Autoworkers in Germany

To conclude, a case study is one of the best methods of getting an overview of what happened to a person, a group, or a situation in practice. It allows you to have an in-depth glance at the real-life problems that businesses, healthcare industry, criminal justice, etc. may face. This insight helps us look at such situations in a different light. This is because we see scenarios that we otherwise would not, without necessarily being there. If you need custom essays , try our research paper writing services .

Get Help Form Qualified Writers

Crafting a case study is not easy. You might want to write one of high quality, but you don’t have the time or expertise. If you’re having trouble with your case study, help with essay request - we'll help. EssayPro writers have read and written countless case studies and are experts in endless disciplines. Request essay writing, editing, or proofreading assistance from our custom case study writing service , and all of your worries will be gone.

Don't Know Where to Start?

Crafting a case study is not easy. You might want to write one of high quality, but you don’t have the time or expertise. Request ' write my case study ' assistance from our service.

What Is A Case Study?

How to cite a case study in apa, how to write a case study, related articles.

• Affiliate Program

• UNITED STATES
• 台灣 (TAIWAN)
• TÜRKIYE (TURKEY)
• Academic Editing Services
• - Research Paper
• - Journal Manuscript
• - Dissertation
• - College & University Assignments
• Admissions Editing Services
• - Application Essay
• - Personal Statement
• - Recommendation Letter
• - Cover Letter
• - CV/Resume
• Business Editing Services
• - Business Documents
• - Report & Brochure
• - Website & Blog
• Writer Editing Services
• - Script & Screenplay
• Our Editors
• Client Reviews
• Editing & Proofreading Prices
• Wordvice Points
• Partner Discount
• Plagiarism Checker
• APA Citation Generator
• MLA Citation Generator
• Chicago Citation Generator
• Vancouver Citation Generator
• - APA Style
• - MLA Style
• - Chicago Style
• - Vancouver Style
• Writing & Editing Guide
• Academic Resources
• Admissions Resources

How to Write a Case Study | Examples & Methods

What is a case study?

A case study is a research approach that provides an in-depth examination of a particular phenomenon, event, organization, or individual. It involves analyzing and interpreting data to provide a comprehensive understanding of the subject under investigation. 

Case studies can be used in various disciplines, including business, social sciences, medicine ( clinical case report ), engineering, and education. The aim of a case study is to provide an in-depth exploration of a specific subject, often with the goal of generating new insights into the phenomena being studied.

When to write a case study

Case studies are often written to present the findings of an empirical investigation or to illustrate a particular point or theory. They are useful when researchers want to gain an in-depth understanding of a specific phenomenon or when they are interested in exploring new areas of inquiry. 

Case studies are also useful when the subject of the research is rare or when the research question is complex and requires an in-depth examination. A case study can be a good fit for a thesis or dissertation as well.

Case study examples

Below are some examples of case studies with their research questions:

These examples demonstrate the diversity of research questions and case studies that can be explored. From studying small businesses in Ghana to the ethical issues in supply chains, case studies can be used to explore a wide range of phenomena.

Outlying cases vs. representative cases

An outlying case stud y refers to a case that is unusual or deviates significantly from the norm. An example of an outlying case study could be a small, family-run bed and breakfast that was able to survive and even thrive during the COVID-19 pandemic, while other larger hotels struggled to stay afloat.

On the other hand, a representative case study refers to a case that is typical of the phenomenon being studied. An example of a representative case study could be a hotel chain that operates in multiple locations that faced significant challenges during the COVID-19 pandemic, such as reduced demand for hotel rooms, increased safety and health protocols, and supply chain disruptions. The hotel chain case could be representative of the broader hospitality industry during the pandemic, and thus provides an insight into the typical challenges that businesses in the industry faced.

Steps for Writing a Case Study

As with any academic paper, writing a case study requires careful preparation and research before a single word of the document is ever written. Follow these basic steps to ensure that you don’t miss any crucial details when composing your case study.

Step 1: Select a case to analyze

After you have developed your statement of the problem and research question , the first step in writing a case study is to select a case that is representative of the phenomenon being investigated or that provides an outlier. For example, if a researcher wants to explore the impact of COVID-19 on the hospitality industry, they could select a representative case, such as a hotel chain that operates in multiple locations, or an outlying case, such as a small bed and breakfast that was able to pivot their business model to survive during the pandemic. Selecting the appropriate case is critical in ensuring the research question is adequately explored.

Step 2: Create a theoretical framework

Theoretical frameworks are used to guide the analysis and interpretation of data in a case study. The framework should provide a clear explanation of the key concepts, variables, and relationships that are relevant to the research question. The theoretical framework can be drawn from existing literature, or the researcher can develop their own framework based on the data collected. The theoretical framework should be developed early in the research process to guide the data collection and analysis.

To give your case analysis a strong theoretical grounding, be sure to include a literature review of references and sources relating to your topic and develop a clear theoretical framework. Your case study does not simply stand on its own but interacts with other studies related to your topic. Your case study can do one of the following: 

• Demonstrate a theory by showing how it explains the case being investigated
• Broaden a theory by identifying additional concepts and ideas that can be incorporated to strengthen it
• Confront a theory via an outlier case that does not conform to established conclusions or assumptions

Step 3: Collect data for your case study

Data collection can involve a variety of research methods , including interviews, surveys, observations, and document analyses, and it can include both primary and secondary sources . It is essential to ensure that the data collected is relevant to the research question and that it is collected in a systematic and ethical manner. Data collection methods should be chosen based on the research question and the availability of data. It is essential to plan data collection carefully to ensure that the data collected is of high quality

Step 4: Describe the case and analyze the details

The final step is to describe the case in detail and analyze the data collected. This involves identifying patterns and themes that emerge from the data and drawing conclusions that are relevant to the research question. It is essential to ensure that the analysis is supported by the data and that any limitations or alternative explanations are acknowledged.

The manner in which you report your findings depends on the type of research you are doing. Some case studies are structured like a standard academic paper, with separate sections or chapters for the methods section , results section , and discussion section , while others are structured more like a standalone literature review.

Regardless of the topic you choose to pursue, writing a case study requires a systematic and rigorous approach to data collection and analysis. By following the steps outlined above and using examples from existing literature, researchers can create a comprehensive and insightful case study that contributes to the understanding of a particular phenomenon.

Preparing Your Case Study for Publication

After completing the draft of your case study, be sure to revise and edit your work for any mistakes, including grammatical errors , punctuation errors , spelling mistakes, and awkward sentence structure . Ensure that your case study is well-structured and that your arguments are well-supported with language that follows the conventions of academic writing .  To ensure your work is polished for style and free of errors, get English editing services from Wordvice, including our paper editing services and manuscript editing services . Let our academic subject experts enhance the style and flow of your academic work so you can submit your case study with confidence.

Organizing Your Social Sciences Research Assignments

• Annotated Bibliography
• Analyzing a Scholarly Journal Article
• Group Presentations
• Dealing with Nervousness
• Using Visual Aids
• Grading Someone Else's Paper
• Types of Structured Group Activities
• Group Project Survival Skills
• Leading a Class Discussion
• Multiple Book Review Essay
• Reviewing Collected Works
• Writing a Case Analysis Paper
• Writing a Case Study
• About Informed Consent
• Writing Field Notes
• Writing a Policy Memo
• Writing a Reflective Paper
• Writing a Research Proposal
• Generative AI and Writing
• Acknowledgments

A case study research paper examines a person, place, event, condition, phenomenon, or other type of subject of analysis in order to extrapolate  key themes and results that help predict future trends, illuminate previously hidden issues that can be applied to practice, and/or provide a means for understanding an important research problem with greater clarity. A case study research paper usually examines a single subject of analysis, but case study papers can also be designed as a comparative investigation that shows relationships between two or more subjects. The methods used to study a case can rest within a quantitative, qualitative, or mixed-method investigative paradigm.

Case Studies. Writing@CSU. Colorado State University; Mills, Albert J. , Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010 ; “What is a Case Study?” In Swanborn, Peter G. Case Study Research: What, Why and How? London: SAGE, 2010.

How to Approach Writing a Case Study Research Paper

General information about how to choose a topic to investigate can be found under the " Choosing a Research Problem " tab in the Organizing Your Social Sciences Research Paper writing guide. Review this page because it may help you identify a subject of analysis that can be investigated using a case study design.

However, identifying a case to investigate involves more than choosing the research problem . A case study encompasses a problem contextualized around the application of in-depth analysis, interpretation, and discussion, often resulting in specific recommendations for action or for improving existing conditions. As Seawright and Gerring note, practical considerations such as time and access to information can influence case selection, but these issues should not be the sole factors used in describing the methodological justification for identifying a particular case to study. Given this, selecting a case includes considering the following:

• The case represents an unusual or atypical example of a research problem that requires more in-depth analysis? Cases often represent a topic that rests on the fringes of prior investigations because the case may provide new ways of understanding the research problem. For example, if the research problem is to identify strategies to improve policies that support girl's access to secondary education in predominantly Muslim nations, you could consider using Azerbaijan as a case study rather than selecting a more obvious nation in the Middle East. Doing so may reveal important new insights into recommending how governments in other predominantly Muslim nations can formulate policies that support improved access to education for girls.
• The case provides important insight or illuminate a previously hidden problem? In-depth analysis of a case can be based on the hypothesis that the case study will reveal trends or issues that have not been exposed in prior research or will reveal new and important implications for practice. For example, anecdotal evidence may suggest drug use among homeless veterans is related to their patterns of travel throughout the day. Assuming prior studies have not looked at individual travel choices as a way to study access to illicit drug use, a case study that observes a homeless veteran could reveal how issues of personal mobility choices facilitate regular access to illicit drugs. Note that it is important to conduct a thorough literature review to ensure that your assumption about the need to reveal new insights or previously hidden problems is valid and evidence-based.
• The case challenges and offers a counter-point to prevailing assumptions? Over time, research on any given topic can fall into a trap of developing assumptions based on outdated studies that are still applied to new or changing conditions or the idea that something should simply be accepted as "common sense," even though the issue has not been thoroughly tested in current practice. A case study analysis may offer an opportunity to gather evidence that challenges prevailing assumptions about a research problem and provide a new set of recommendations applied to practice that have not been tested previously. For example, perhaps there has been a long practice among scholars to apply a particular theory in explaining the relationship between two subjects of analysis. Your case could challenge this assumption by applying an innovative theoretical framework [perhaps borrowed from another discipline] to explore whether this approach offers new ways of understanding the research problem. Taking a contrarian stance is one of the most important ways that new knowledge and understanding develops from existing literature.
• The case provides an opportunity to pursue action leading to the resolution of a problem? Another way to think about choosing a case to study is to consider how the results from investigating a particular case may result in findings that reveal ways in which to resolve an existing or emerging problem. For example, studying the case of an unforeseen incident, such as a fatal accident at a railroad crossing, can reveal hidden issues that could be applied to preventative measures that contribute to reducing the chance of accidents in the future. In this example, a case study investigating the accident could lead to a better understanding of where to strategically locate additional signals at other railroad crossings so as to better warn drivers of an approaching train, particularly when visibility is hindered by heavy rain, fog, or at night.
• The case offers a new direction in future research? A case study can be used as a tool for an exploratory investigation that highlights the need for further research about the problem. A case can be used when there are few studies that help predict an outcome or that establish a clear understanding about how best to proceed in addressing a problem. For example, after conducting a thorough literature review [very important!], you discover that little research exists showing the ways in which women contribute to promoting water conservation in rural communities of east central Africa. A case study of how women contribute to saving water in a rural village of Uganda can lay the foundation for understanding the need for more thorough research that documents how women in their roles as cooks and family caregivers think about water as a valuable resource within their community. This example of a case study could also point to the need for scholars to build new theoretical frameworks around the topic [e.g., applying feminist theories of work and family to the issue of water conservation].

Eisenhardt, Kathleen M. “Building Theories from Case Study Research.” Academy of Management Review 14 (October 1989): 532-550; Emmel, Nick. Sampling and Choosing Cases in Qualitative Research: A Realist Approach . Thousand Oaks, CA: SAGE Publications, 2013; Gerring, John. “What Is a Case Study and What Is It Good for?” American Political Science Review 98 (May 2004): 341-354; Mills, Albert J. , Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010; Seawright, Jason and John Gerring. "Case Selection Techniques in Case Study Research." Political Research Quarterly 61 (June 2008): 294-308.

Structure and Writing Style

The purpose of a paper in the social sciences designed around a case study is to thoroughly investigate a subject of analysis in order to reveal a new understanding about the research problem and, in so doing, contributing new knowledge to what is already known from previous studies. In applied social sciences disciplines [e.g., education, social work, public administration, etc.], case studies may also be used to reveal best practices, highlight key programs, or investigate interesting aspects of professional work.

In general, the structure of a case study research paper is not all that different from a standard college-level research paper. However, there are subtle differences you should be aware of. Here are the key elements to organizing and writing a case study research paper.

I.  Introduction

As with any research paper, your introduction should serve as a roadmap for your readers to ascertain the scope and purpose of your study . The introduction to a case study research paper, however, should not only describe the research problem and its significance, but you should also succinctly describe why the case is being used and how it relates to addressing the problem. The two elements should be linked. With this in mind, a good introduction answers these four questions:

• What is being studied? Describe the research problem and describe the subject of analysis [the case] you have chosen to address the problem. Explain how they are linked and what elements of the case will help to expand knowledge and understanding about the problem.
• Why is this topic important to investigate? Describe the significance of the research problem and state why a case study design and the subject of analysis that the paper is designed around is appropriate in addressing the problem.
• What did we know about this topic before I did this study? Provide background that helps lead the reader into the more in-depth literature review to follow. If applicable, summarize prior case study research applied to the research problem and why it fails to adequately address the problem. Describe why your case will be useful. If no prior case studies have been used to address the research problem, explain why you have selected this subject of analysis.
• How will this study advance new knowledge or new ways of understanding? Explain why your case study will be suitable in helping to expand knowledge and understanding about the research problem.

Each of these questions should be addressed in no more than a few paragraphs. Exceptions to this can be when you are addressing a complex research problem or subject of analysis that requires more in-depth background information.

II.  Literature Review

The literature review for a case study research paper is generally structured the same as it is for any college-level research paper. The difference, however, is that the literature review is focused on providing background information and  enabling historical interpretation of the subject of analysis in relation to the research problem the case is intended to address . This includes synthesizing studies that help to:

• Place relevant works in the context of their contribution to understanding the case study being investigated . This would involve summarizing studies that have used a similar subject of analysis to investigate the research problem. If there is literature using the same or a very similar case to study, you need to explain why duplicating past research is important [e.g., conditions have changed; prior studies were conducted long ago, etc.].
• Describe the relationship each work has to the others under consideration that informs the reader why this case is applicable . Your literature review should include a description of any works that support using the case to investigate the research problem and the underlying research questions.
• Identify new ways to interpret prior research using the case study . If applicable, review any research that has examined the research problem using a different research design. Explain how your use of a case study design may reveal new knowledge or a new perspective or that can redirect research in an important new direction.
• Resolve conflicts amongst seemingly contradictory previous studies . This refers to synthesizing any literature that points to unresolved issues of concern about the research problem and describing how the subject of analysis that forms the case study can help resolve these existing contradictions.
• Point the way in fulfilling a need for additional research . Your review should examine any literature that lays a foundation for understanding why your case study design and the subject of analysis around which you have designed your study may reveal a new way of approaching the research problem or offer a perspective that points to the need for additional research.
• Expose any gaps that exist in the literature that the case study could help to fill . Summarize any literature that not only shows how your subject of analysis contributes to understanding the research problem, but how your case contributes to a new way of understanding the problem that prior research has failed to do.
• Locate your own research within the context of existing literature [very important!] . Collectively, your literature review should always place your case study within the larger domain of prior research about the problem. The overarching purpose of reviewing pertinent literature in a case study paper is to demonstrate that you have thoroughly identified and synthesized prior studies in relation to explaining the relevance of the case in addressing the research problem.

III.  Method

In this section, you explain why you selected a particular case [i.e., subject of analysis] and the strategy you used to identify and ultimately decide that your case was appropriate in addressing the research problem. The way you describe the methods used varies depending on the type of subject of analysis that constitutes your case study.

If your subject of analysis is an incident or event . In the social and behavioral sciences, the event or incident that represents the case to be studied is usually bounded by time and place, with a clear beginning and end and with an identifiable location or position relative to its surroundings. The subject of analysis can be a rare or critical event or it can focus on a typical or regular event. The purpose of studying a rare event is to illuminate new ways of thinking about the broader research problem or to test a hypothesis. Critical incident case studies must describe the method by which you identified the event and explain the process by which you determined the validity of this case to inform broader perspectives about the research problem or to reveal new findings. However, the event does not have to be a rare or uniquely significant to support new thinking about the research problem or to challenge an existing hypothesis. For example, Walo, Bull, and Breen conducted a case study to identify and evaluate the direct and indirect economic benefits and costs of a local sports event in the City of Lismore, New South Wales, Australia. The purpose of their study was to provide new insights from measuring the impact of a typical local sports event that prior studies could not measure well because they focused on large "mega-events." Whether the event is rare or not, the methods section should include an explanation of the following characteristics of the event: a) when did it take place; b) what were the underlying circumstances leading to the event; and, c) what were the consequences of the event in relation to the research problem.

If your subject of analysis is a person. Explain why you selected this particular individual to be studied and describe what experiences they have had that provide an opportunity to advance new understandings about the research problem. Mention any background about this person which might help the reader understand the significance of their experiences that make them worthy of study. This includes describing the relationships this person has had with other people, institutions, and/or events that support using them as the subject for a case study research paper. It is particularly important to differentiate the person as the subject of analysis from others and to succinctly explain how the person relates to examining the research problem [e.g., why is one politician in a particular local election used to show an increase in voter turnout from any other candidate running in the election]. Note that these issues apply to a specific group of people used as a case study unit of analysis [e.g., a classroom of students].

If your subject of analysis is a place. In general, a case study that investigates a place suggests a subject of analysis that is unique or special in some way and that this uniqueness can be used to build new understanding or knowledge about the research problem. A case study of a place must not only describe its various attributes relevant to the research problem [e.g., physical, social, historical, cultural, economic, political], but you must state the method by which you determined that this place will illuminate new understandings about the research problem. It is also important to articulate why a particular place as the case for study is being used if similar places also exist [i.e., if you are studying patterns of homeless encampments of veterans in open spaces, explain why you are studying Echo Park in Los Angeles rather than Griffith Park?]. If applicable, describe what type of human activity involving this place makes it a good choice to study [e.g., prior research suggests Echo Park has more homeless veterans].

If your subject of analysis is a phenomenon. A phenomenon refers to a fact, occurrence, or circumstance that can be studied or observed but with the cause or explanation to be in question. In this sense, a phenomenon that forms your subject of analysis can encompass anything that can be observed or presumed to exist but is not fully understood. In the social and behavioral sciences, the case usually focuses on human interaction within a complex physical, social, economic, cultural, or political system. For example, the phenomenon could be the observation that many vehicles used by ISIS fighters are small trucks with English language advertisements on them. The research problem could be that ISIS fighters are difficult to combat because they are highly mobile. The research questions could be how and by what means are these vehicles used by ISIS being supplied to the militants and how might supply lines to these vehicles be cut off? How might knowing the suppliers of these trucks reveal larger networks of collaborators and financial support? A case study of a phenomenon most often encompasses an in-depth analysis of a cause and effect that is grounded in an interactive relationship between people and their environment in some way.

NOTE:   The choice of the case or set of cases to study cannot appear random. Evidence that supports the method by which you identified and chose your subject of analysis should clearly support investigation of the research problem and linked to key findings from your literature review. Be sure to cite any studies that helped you determine that the case you chose was appropriate for examining the problem.

IV.  Discussion

The main elements of your discussion section are generally the same as any research paper, but centered around interpreting and drawing conclusions about the key findings from your analysis of the case study. Note that a general social sciences research paper may contain a separate section to report findings. However, in a paper designed around a case study, it is common to combine a description of the results with the discussion about their implications. The objectives of your discussion section should include the following:

Reiterate the Research Problem/State the Major Findings Briefly reiterate the research problem you are investigating and explain why the subject of analysis around which you designed the case study were used. You should then describe the findings revealed from your study of the case using direct, declarative, and succinct proclamation of the study results. Highlight any findings that were unexpected or especially profound.

Explain the Meaning of the Findings and Why They are Important Systematically explain the meaning of your case study findings and why you believe they are important. Begin this part of the section by repeating what you consider to be your most important or surprising finding first, then systematically review each finding. Be sure to thoroughly extrapolate what your analysis of the case can tell the reader about situations or conditions beyond the actual case that was studied while, at the same time, being careful not to misconstrue or conflate a finding that undermines the external validity of your conclusions.

Relate the Findings to Similar Studies No study in the social sciences is so novel or possesses such a restricted focus that it has absolutely no relation to previously published research. The discussion section should relate your case study results to those found in other studies, particularly if questions raised from prior studies served as the motivation for choosing your subject of analysis. This is important because comparing and contrasting the findings of other studies helps support the overall importance of your results and it highlights how and in what ways your case study design and the subject of analysis differs from prior research about the topic.

Consider Alternative Explanations of the Findings Remember that the purpose of social science research is to discover and not to prove. When writing the discussion section, you should carefully consider all possible explanations revealed by the case study results, rather than just those that fit your hypothesis or prior assumptions and biases. Be alert to what the in-depth analysis of the case may reveal about the research problem, including offering a contrarian perspective to what scholars have stated in prior research if that is how the findings can be interpreted from your case.

Acknowledge the Study's Limitations You can state the study's limitations in the conclusion section of your paper but describing the limitations of your subject of analysis in the discussion section provides an opportunity to identify the limitations and explain why they are not significant. This part of the discussion section should also note any unanswered questions or issues your case study could not address. More detailed information about how to document any limitations to your research can be found here .

Suggest Areas for Further Research Although your case study may offer important insights about the research problem, there are likely additional questions related to the problem that remain unanswered or findings that unexpectedly revealed themselves as a result of your in-depth analysis of the case. Be sure that the recommendations for further research are linked to the research problem and that you explain why your recommendations are valid in other contexts and based on the original assumptions of your study.

V.  Conclusion

As with any research paper, you should summarize your conclusion in clear, simple language; emphasize how the findings from your case study differs from or supports prior research and why. Do not simply reiterate the discussion section. Provide a synthesis of key findings presented in the paper to show how these converge to address the research problem. If you haven't already done so in the discussion section, be sure to document the limitations of your case study and any need for further research.

The function of your paper's conclusion is to: 1) reiterate the main argument supported by the findings from your case study; 2) state clearly the context, background, and necessity of pursuing the research problem using a case study design in relation to an issue, controversy, or a gap found from reviewing the literature; and, 3) provide a place to persuasively and succinctly restate the significance of your research problem, given that the reader has now been presented with in-depth information about the topic.

Consider the following points to help ensure your conclusion is appropriate:

• If the argument or purpose of your paper is complex, you may need to summarize these points for your reader.
• If prior to your conclusion, you have not yet explained the significance of your findings or if you are proceeding inductively, use the conclusion of your paper to describe your main points and explain their significance.
• Move from a detailed to a general level of consideration of the case study's findings that returns the topic to the context provided by the introduction or within a new context that emerges from your case study findings.

Note that, depending on the discipline you are writing in or the preferences of your professor, the concluding paragraph may contain your final reflections on the evidence presented as it applies to practice or on the essay's central research problem. However, the nature of being introspective about the subject of analysis you have investigated will depend on whether you are explicitly asked to express your observations in this way.

Problems to Avoid

Overgeneralization One of the goals of a case study is to lay a foundation for understanding broader trends and issues applied to similar circumstances. However, be careful when drawing conclusions from your case study. They must be evidence-based and grounded in the results of the study; otherwise, it is merely speculation. Looking at a prior example, it would be incorrect to state that a factor in improving girls access to education in Azerbaijan and the policy implications this may have for improving access in other Muslim nations is due to girls access to social media if there is no documentary evidence from your case study to indicate this. There may be anecdotal evidence that retention rates were better for girls who were engaged with social media, but this observation would only point to the need for further research and would not be a definitive finding if this was not a part of your original research agenda.

Failure to Document Limitations No case is going to reveal all that needs to be understood about a research problem. Therefore, just as you have to clearly state the limitations of a general research study , you must describe the specific limitations inherent in the subject of analysis. For example, the case of studying how women conceptualize the need for water conservation in a village in Uganda could have limited application in other cultural contexts or in areas where fresh water from rivers or lakes is plentiful and, therefore, conservation is understood more in terms of managing access rather than preserving access to a scarce resource.

Failure to Extrapolate All Possible Implications Just as you don't want to over-generalize from your case study findings, you also have to be thorough in the consideration of all possible outcomes or recommendations derived from your findings. If you do not, your reader may question the validity of your analysis, particularly if you failed to document an obvious outcome from your case study research. For example, in the case of studying the accident at the railroad crossing to evaluate where and what types of warning signals should be located, you failed to take into consideration speed limit signage as well as warning signals. When designing your case study, be sure you have thoroughly addressed all aspects of the problem and do not leave gaps in your analysis that leave the reader questioning the results.

Case Studies. Writing@CSU. Colorado State University; Gerring, John. Case Study Research: Principles and Practices . New York: Cambridge University Press, 2007; Merriam, Sharan B. Qualitative Research and Case Study Applications in Education . Rev. ed. San Francisco, CA: Jossey-Bass, 1998; Miller, Lisa L. “The Use of Case Studies in Law and Social Science Research.” Annual Review of Law and Social Science 14 (2018): TBD; Mills, Albert J., Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010; Putney, LeAnn Grogan. "Case Study." In Encyclopedia of Research Design , Neil J. Salkind, editor. (Thousand Oaks, CA: SAGE Publications, 2010), pp. 116-120; Simons, Helen. Case Study Research in Practice . London: SAGE Publications, 2009;  Kratochwill,  Thomas R. and Joel R. Levin, editors. Single-Case Research Design and Analysis: New Development for Psychology and Education .  Hilldsale, NJ: Lawrence Erlbaum Associates, 1992; Swanborn, Peter G. Case Study Research: What, Why and How? London : SAGE, 2010; Yin, Robert K. Case Study Research: Design and Methods . 6th edition. Los Angeles, CA, SAGE Publications, 2014; Walo, Maree, Adrian Bull, and Helen Breen. “Achieving Economic Benefits at Local Events: A Case Study of a Local Sports Event.” Festival Management and Event Tourism 4 (1996): 95-106.

Writing Tip

At Least Five Misconceptions about Case Study Research

Social science case studies are often perceived as limited in their ability to create new knowledge because they are not randomly selected and findings cannot be generalized to larger populations. Flyvbjerg examines five misunderstandings about case study research and systematically "corrects" each one. To quote, these are:

Misunderstanding 1 :  General, theoretical [context-independent] knowledge is more valuable than concrete, practical [context-dependent] knowledge. Misunderstanding 2 :  One cannot generalize on the basis of an individual case; therefore, the case study cannot contribute to scientific development. Misunderstanding 3 :  The case study is most useful for generating hypotheses; that is, in the first stage of a total research process, whereas other methods are more suitable for hypotheses testing and theory building. Misunderstanding 4 :  The case study contains a bias toward verification, that is, a tendency to confirm the researcher’s preconceived notions. Misunderstanding 5 :  It is often difficult to summarize and develop general propositions and theories on the basis of specific case studies [p. 221].

While writing your paper, think introspectively about how you addressed these misconceptions because to do so can help you strengthen the validity and reliability of your research by clarifying issues of case selection, the testing and challenging of existing assumptions, the interpretation of key findings, and the summation of case outcomes. Think of a case study research paper as a complete, in-depth narrative about the specific properties and key characteristics of your subject of analysis applied to the research problem.

Flyvbjerg, Bent. “Five Misunderstandings About Case-Study Research.” Qualitative Inquiry 12 (April 2006): 219-245.

• << Previous: Writing a Case Analysis Paper
• Next: Writing a Field Report >>
• Last Updated: Mar 6, 2024 1:00 PM
• URL: https://libguides.usc.edu/writingguide/assignments

• Bipolar Disorder
• Therapy Center
• When To See a Therapist
• Types of Therapy
• Best Online Therapy
• Best Couples Therapy
• Best Family Therapy
• Managing Stress
• Sleep and Dreaming
• Understanding Emotions
• Self-Improvement
• Healthy Relationships
• Student Resources
• Personality Types
• Guided Meditations
• Verywell Mind Insights
• 2023 Verywell Mind 25
• Mental Health in the Classroom
• Editorial Process
• Meet Our Review Board
• Crisis Support

What Is a Case Study?

Weighing the pros and cons of this method of research

Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

Cara Lustik is a fact-checker and copywriter.

Verywell / Colleen Tighe

• Pros and Cons

What Types of Case Studies Are Out There?

Where do you find data for a case study, how do i write a psychology case study.

A case study is an in-depth study of one person, group, or event. In a case study, nearly every aspect of the subject's life and history is analyzed to seek patterns and causes of behavior. Case studies can be used in many different fields, including psychology, medicine, education, anthropology, political science, and social work.

The point of a case study is to learn as much as possible about an individual or group so that the information can be generalized to many others. Unfortunately, case studies tend to be highly subjective, and it is sometimes difficult to generalize results to a larger population.

While case studies focus on a single individual or group, they follow a format similar to other types of psychology writing. If you are writing a case study, we got you—here are some rules of APA format to reference.  

At a Glance

A case study, or an in-depth study of a person, group, or event, can be a useful research tool when used wisely. In many cases, case studies are best used in situations where it would be difficult or impossible for you to conduct an experiment. They are helpful for looking at unique situations and allow researchers to gather a lot of˜ information about a specific individual or group of people. However, it's important to be cautious of any bias we draw from them as they are highly subjective.

What Are the Benefits and Limitations of Case Studies?

A case study can have its strengths and weaknesses. Researchers must consider these pros and cons before deciding if this type of study is appropriate for their needs.

One of the greatest advantages of a case study is that it allows researchers to investigate things that are often difficult or impossible to replicate in a lab. Some other benefits of a case study:

• Allows researchers to capture information on the 'how,' 'what,' and 'why,' of something that's implemented
• Gives researchers the chance to collect information on why one strategy might be chosen over another
• Permits researchers to develop hypotheses that can be explored in experimental research

On the other hand, a case study can have some drawbacks:

• It cannot necessarily be generalized to the larger population
• Cannot demonstrate cause and effect
• It may not be scientifically rigorous
• It can lead to bias

Researchers may choose to perform a case study if they want to explore a unique or recently discovered phenomenon. Through their insights, researchers develop additional ideas and study questions that might be explored in future studies.

It's important to remember that the insights from case studies cannot be used to determine cause-and-effect relationships between variables. However, case studies may be used to develop hypotheses that can then be addressed in experimental research.

Case Study Examples

There have been a number of notable case studies in the history of psychology. Much of  Freud's work and theories were developed through individual case studies. Some great examples of case studies in psychology include:

• Anna O : Anna O. was a pseudonym of a woman named Bertha Pappenheim, a patient of a physician named Josef Breuer. While she was never a patient of Freud's, Freud and Breuer discussed her case extensively. The woman was experiencing symptoms of a condition that was then known as hysteria and found that talking about her problems helped relieve her symptoms. Her case played an important part in the development of talk therapy as an approach to mental health treatment.
• Phineas Gage : Phineas Gage was a railroad employee who experienced a terrible accident in which an explosion sent a metal rod through his skull, damaging important portions of his brain. Gage recovered from his accident but was left with serious changes in both personality and behavior.
• Genie : Genie was a young girl subjected to horrific abuse and isolation. The case study of Genie allowed researchers to study whether language learning was possible, even after missing critical periods for language development. Her case also served as an example of how scientific research may interfere with treatment and lead to further abuse of vulnerable individuals.

Such cases demonstrate how case research can be used to study things that researchers could not replicate in experimental settings. In Genie's case, her horrific abuse denied her the opportunity to learn a language at critical points in her development.

This is clearly not something researchers could ethically replicate, but conducting a case study on Genie allowed researchers to study phenomena that are otherwise impossible to reproduce.

There are a few different types of case studies that psychologists and other researchers might use:

• Collective case studies : These involve studying a group of individuals. Researchers might study a group of people in a certain setting or look at an entire community. For example, psychologists might explore how access to resources in a community has affected the collective mental well-being of those who live there.
• Descriptive case studies : These involve starting with a descriptive theory. The subjects are then observed, and the information gathered is compared to the pre-existing theory.
• Explanatory case studies : These   are often used to do causal investigations. In other words, researchers are interested in looking at factors that may have caused certain things to occur.
• Exploratory case studies : These are sometimes used as a prelude to further, more in-depth research. This allows researchers to gather more information before developing their research questions and hypotheses .
• Instrumental case studies : These occur when the individual or group allows researchers to understand more than what is initially obvious to observers.
• Intrinsic case studies : This type of case study is when the researcher has a personal interest in the case. Jean Piaget's observations of his own children are good examples of how an intrinsic case study can contribute to the development of a psychological theory.

The three main case study types often used are intrinsic, instrumental, and collective. Intrinsic case studies are useful for learning about unique cases. Instrumental case studies help look at an individual to learn more about a broader issue. A collective case study can be useful for looking at several cases simultaneously.

The type of case study that psychology researchers use depends on the unique characteristics of the situation and the case itself.

There are a number of different sources and methods that researchers can use to gather information about an individual or group. Six major sources that have been identified by researchers are:

• Archival records : Census records, survey records, and name lists are examples of archival records.
• Direct observation : This strategy involves observing the subject, often in a natural setting . While an individual observer is sometimes used, it is more common to utilize a group of observers.
• Documents : Letters, newspaper articles, administrative records, etc., are the types of documents often used as sources.
• Interviews : Interviews are one of the most important methods for gathering information in case studies. An interview can involve structured survey questions or more open-ended questions.
• Participant observation : When the researcher serves as a participant in events and observes the actions and outcomes, it is called participant observation.
• Physical artifacts : Tools, objects, instruments, and other artifacts are often observed during a direct observation of the subject.

If you have been directed to write a case study for a psychology course, be sure to check with your instructor for any specific guidelines you need to follow. If you are writing your case study for a professional publication, check with the publisher for their specific guidelines for submitting a case study.

Here is a general outline of what should be included in a case study.

Section 1: A Case History

This section will have the following structure and content:

Background information : The first section of your paper will present your client's background. Include factors such as age, gender, work, health status, family mental health history, family and social relationships, drug and alcohol history, life difficulties, goals, and coping skills and weaknesses.

Description of the presenting problem : In the next section of your case study, you will describe the problem or symptoms that the client presented with.

Describe any physical, emotional, or sensory symptoms reported by the client. Thoughts, feelings, and perceptions related to the symptoms should also be noted. Any screening or diagnostic assessments that are used should also be described in detail and all scores reported.

Your diagnosis : Provide your diagnosis and give the appropriate Diagnostic and Statistical Manual code. Explain how you reached your diagnosis, how the client's symptoms fit the diagnostic criteria for the disorder(s), or any possible difficulties in reaching a diagnosis.

Section 2: Treatment Plan

This portion of the paper will address the chosen treatment for the condition. This might also include the theoretical basis for the chosen treatment or any other evidence that might exist to support why this approach was chosen.

• Cognitive behavioral approach : Explain how a cognitive behavioral therapist would approach treatment. Offer background information on cognitive behavioral therapy and describe the treatment sessions, client response, and outcome of this type of treatment. Make note of any difficulties or successes encountered by your client during treatment.
• Humanistic approach : Describe a humanistic approach that could be used to treat your client, such as client-centered therapy . Provide information on the type of treatment you chose, the client's reaction to the treatment, and the end result of this approach. Explain why the treatment was successful or unsuccessful.
• Psychoanalytic approach : Describe how a psychoanalytic therapist would view the client's problem. Provide some background on the psychoanalytic approach and cite relevant references. Explain how psychoanalytic therapy would be used to treat the client, how the client would respond to therapy, and the effectiveness of this treatment approach.
• Pharmacological approach : If treatment primarily involves the use of medications, explain which medications were used and why. Provide background on the effectiveness of these medications and how monotherapy may compare with an approach that combines medications with therapy or other treatments.

This section of a case study should also include information about the treatment goals, process, and outcomes.

When you are writing a case study, you should also include a section where you discuss the case study itself, including the strengths and limitiations of the study. You should note how the findings of your case study might support previous research. 

In your discussion section, you should also describe some of the implications of your case study. What ideas or findings might require further exploration? How might researchers go about exploring some of these questions in additional studies?

Need More Tips?

Here are a few additional pointers to keep in mind when formatting your case study:

• Never refer to the subject of your case study as "the client." Instead, use their name or a pseudonym.
• Read examples of case studies to gain an idea about the style and format.
• Remember to use APA format when citing references .

Crowe S, Cresswell K, Robertson A, Huby G, Avery A, Sheikh A. The case study approach .  BMC Med Res Methodol . 2011;11:100.

Crowe S, Cresswell K, Robertson A, Huby G, Avery A, Sheikh A. The case study approach . BMC Med Res Methodol . 2011 Jun 27;11:100. doi:10.1186/1471-2288-11-100

Gagnon, Yves-Chantal.  The Case Study as Research Method: A Practical Handbook . Canada, Chicago Review Press Incorporated DBA Independent Pub Group, 2010.

Yin, Robert K. Case Study Research and Applications: Design and Methods . United States, SAGE Publications, 2017.

By Kendra Cherry, MSEd Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

How to Write a Case Study: Step-by-Step Guide with Examples

• October 7, 2022

Content Manager at SocialBee

Why is learning how to write a case study so important?

Well, because it provides your customers with social proof and supporting evidence of how effective your products and services are. Moreover, it eliminates the doubt that usually makes clients give up on their next purchase.

That is why today we are going to talk about the step-by-step process of writing a case study . We prepared five business case study examples guaranteed to inspire you throughout the process.

Let’s get started!

What Is a Case Study?

A case study is a piece of content that focuses on a case from your business history. It describes the problems your client faced and the solutions you used to help them succeed.

The goal of a writing case study is to promote your business , so your aim should be to put together a compelling story with evidence that backs up all your claims.

Case studies use real-life examples to show your clients the quality and effectiveness of your products and services. It’s a marketing tool that provides credibility and it helps your potential clients gain confidence in your brand.

Case studies can be structured in different formats:

• A written document
• An infographic
• A blog post
• A landing page

Case Study Benefits

A great case study makes your potential customers want to benefit from the products and services that helped your client overcome their challenges. 

Here are the benefits of writing a case study:

• It is an affordable marketing practice
• It decreases the perceived risk of your potential clients
• It provides transparency
• It builds trust and credibility among prospective customers
• It makes your potential clients relate to the problem
• It provides your potential clients with a solution for their problems

How to Write a Case Study

Now that you know what a case study is, let’s get into the real reason why you are here — learning how to write an in-depth study.

Here is the step-by-step process of writing a case study:

• Identify the topic of your case study
• Start collaborating with a client
• Prepare questions for the interview
• Conduct the case study interview
• Structure your case study 
• Make it visual

Step 1: Identify the Topic of Your Case Study

A case study starts with a strategy. Choosing what you want to write about should be closely related to your business needs. More specifically, what service or product do you want to promote through your case study?

Because case studies focus on client challenges, business solutions, and results, you have to carefully pick the case that your potential clients will relate to the most. 

To communicate the benefits of your business, you should focus on a customer story that appeals to a specific segment of your audience . Consequently, you will target clients that relate to your customer example while providing a solution for their needs and pain points — your products and services.

Start by focusing all your research methods on identifying your customers’ main pain points. Then find examples of how your products or services have helped them overcome their challenges and achieve their goals .

Furthermore, to make sure you choose the best case study topic for your buyer persona , you should have a meeting with your sales/customer service team. Because they are in close contact with your customers, they will be able to tell you:

• The main challenges your clients face 
• The services/products that bring them the best results 

These are the main two pieces of information you want your case study to focus on.

Step 2: Start Collaborating with a Client

With a clear topic in mind, you have to find the best fit for your case study. 

However, that is not all. First, you must obtain the client’s permission. After all, your business story is theirs too.

So, craft an email to provide your client with an overview of the case study. This will help them make a decision. 

Your message should include:

• The case study format (video, written, etc.) and where it will be published (blog, landing page , etc.)
• The topic of the document
• The timeline of the process
• The information that will be included
• The benefits they get as a result of this collaboration (brand exposure, backlinks)

Additionally, you can offer to schedule a call or a meeting to answer all their questions and curiosities and provide a means for clear and open communication.

Once you receive a positive response from your client, you can continue with the next step of the process: the actual interview.

PRO TIP: A great way to ensure a smooth and safe collaboration between you and your client is to sign a legal release form before writing the case study. This will allow you to use their information and protect you from issues that may occur in the future. Moreover, if the client is not comfortable with revealing their identity, you can always offer them anonymity.

Step 3: Prepare Questions for the Interview

Now that you have the subject for your case study, it’s time to write and organize your interview in several sets of questions.

Don’t forget that the whole structure of your case study is based on the information you get from your customer interview.

So pay attention to the way you phrase the questions. After all, your goal is to gather all the data you need to avoid creating a back-and-forth process that will consume your client’s time and energy.

To help you create the best questionnaire, we created a set of case study questions and organized them into different categories. 

Here are the five main sections your case study interview should contain:

• The client’s background information
• The problem
• The start of the collaboration
• The solution
• The results

A. The Client’s Background Information

This part of the case study interview must give a comprehensive look into your customer’s business and allow your readers to get to know them better.

Here are some question ideas:

B. The Problem

Now it’s time to get into the reason your client came to you for assistance, the initial challenge that triggered your collaboration.

In this part of the interview process, you want to find out what made them ask for help and what was their situation before working with you.

You can ask your client the following case study questions:

C. The Start of the Collaboration

This part of the case study interview will focus on the process that made your collaboration possible. More specifically, how did your client research possible collaboration opportunities, and why they chose your business? 

This information will not only be informative for your future customers but will also give you a behind-the-scenes look into their decision-making process.

D. The Solution

It’s time to get into one of the most significant parts of the case study interview — the solution. Here you should discuss how your services have helped their business recover from the problems mentioned before.

Make sure you ask the right questions so you can really paint the picture of a satisfied customer.

Have a look at these question examples:

E. The Results

The best proof you can give to your customers is through your results. And this is the perfect opportunity to let your actions speak for themselves.

Unlike the other marketing strategies you use to promote your business, the content is provided by your customer, not by your team. As a result, you end up with a project that is on another level of reliability.

Here is how you can ask your client about their results:

Step 4: Conduct the Case Study Interview

Now that you have a great set of case study questions, it’s time to put them to good use.

Decide on the type of interview you want to conduct: face-to-face, video call , or phone call. Then, consult with your client and set up a date and a time when you are both available. 

It should be noted that during the interview it’s best to use a recording device for accuracy. Maybe you don’t have time to write down all the information, and you forget important details. Or maybe you want to be focused more on the conversational aspect of the interview, and you don’t want to write anything down while it’s happening.

Step 5: Structure Your Case Study 

The hard part is over. Now it’s time to organize all the information you gathered in an appealing format. Let’s have a look at what your case study should contain.

Here are the components of a case study:

• Engaging title
• Executive summary
• Client description 
• Introduction to the problem
• The problem-solving process
• Progress and results

A. Engaging Title

Putting that much work into a project, it would be a shame not to do your best to attract more readers. So, take into consideration that you only have a few seconds to catch your audience’s attention. 

You can also use a headline analyzer to evaluate the performance of your title.

The best case study titles contain:

• Relevant keywords
• Customer pain points
• Clear result

Case study example :

B. Executive Summary

Your executive summary should include a thesis statement that sums up the main points of your case study. Therefore, it must be clear and concise. Moreover, to make your audience curious, you can add a statistic or a relevant piece of data that they might be interested in.

Here is what you should include in your executive summary:

• The business you are writing about (only if the clients wants to make themselves known)
• Relevant statistics

C. Client Description 

Here is where you start to include the information you gained from your interview. Provide your readers with a clear picture of your client and create a context for your case study.

Take your client’s answers from the “Client Background” section of the interview and present them in a more appealing format.

D. Introduction to the Problem

In this section, use your client’s interview answers to write about the problem they were experiencing before working with you.

Remember to be specific because you want your audience to fully understand the situation and relate to it. At the end of the day, the goal of the case study is to show your potential customers why they should buy your services/products.

E. The Problem-Solving Process

Next, explain how your service/product helped your client overcome their problems. Moreover, let your readers know how and why your service/product worked in their case.

In this part of the case study, you should summarize: 

• The strategy used to solve the problem of your customer 
• The process of implementing the solution 

F. Progress and Results

Tell your readers about what you and your client have achieved during your collaboration. Here you can include:

• Graphics about your progress
• Business objectives they have achieved
• Relevant metrics 

Step 6: Make It Visual

To elevate the information you have written for your audience, you must make sure it’s appealing and easy to read. And a great way to achieve that is to use visuals that add value to your case study.

Here are some design elements that will make emphasize your text:

• Graphic symbols that guide the eye (arrows, bullet points, checkmarks, etc.)
• Charts, graphics, tables 
• Relevant screenshots from business reports
• The colors and fonts of your brand
• Your client’s logo

Platforms like Canva can really come in handy while designing your case study. It’s easy to use and it has multiple free slide templates and graphics that save you time and money.

PRO TIP: Share Your Case Study Across All Marketing Channels

A case study is a perfect example of evergreen content that can be reshared endlessly on your social media channels .

Aside from helping you maintain a consistent posting schedule with ease, case study-related posts will increase your credibility and push leads toward the bottom of your marketing funnel . Other examples of social proof evergreen content are reviews, testimonials, and positive social media mentions.

To keep track of all your evergreen posts and have them scheduled on a continuous loop, use a social media tool like SocialBee.

Create evergreen content categories where all your posts get reposted regularly on your social media channels. 

Start your 14-day trial today and start using SocialBee for free!

Aside from promoting your case study on social media, you can also feature it in your newsletter that you can create using email newsletter software , include it as a pop-up on your website, and even create a separate landing page dedicated to your customer study.

Share Your Case Study on Social Media with SocialBee!

Get to writing your own case study.

What do you think? Is writing a case study easier than you thought? We sure hope so.

Learning how to write a case study is a simple process once you understand the logical steps that go into it. So make sure you go over the guide a couple of times before you start documenting your customer success stories.

And remember that the goal of your case study is to attract more leads . Therefore you need to include tangible results and valuable details that will compel your audience to invest in your products and services.

Article written by

Content writer at SocialBee

Related articles

Social Media Government Marketing: Where and What to Post?

Are you leveraging the power of social media government marketing effectively?  In today’s digital age, federal agencies face unique challenges

How to Approach Social Media Reputation Management in 2024

In 2024, the stakes for social media reputation management have never been higher. With every tweet, post, and comment having

Level up your social media game with exclusive resources delivered straight to your inbox

Proudly supporting

Out of post ideas? Get our social media calendar

Access 500+ content ideas, post examples, and Canva templates.

Use SocialBee’s Free AI Post Generator to create content for your social media profiles.

• Customizable tone of voice
• Several content variations to choose from
• 1000+ pre-made AI prompts

We use essential cookies to make Venngage work. By clicking “Accept All Cookies”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Manage Cookies

Cookies and similar technologies collect certain information about how you’re using our website. Some of them are essential, and without them you wouldn’t be able to use Venngage. But others are optional, and you get to choose whether we use them or not.

Strictly Necessary Cookies

These cookies are always on, as they’re essential for making Venngage work, and making it safe. Without these cookies, services you’ve asked for can’t be provided.

Show cookie providers

• Google Login

Functionality Cookies

These cookies help us provide enhanced functionality and personalisation, and remember your settings. They may be set by us or by third party providers.

Performance Cookies

These cookies help us analyze how many people are using Venngage, where they come from and how they're using it. If you opt out of these cookies, we can’t get feedback to make Venngage better for you and all our users.

• Google Analytics

Targeting Cookies

These cookies are set by our advertising partners to track your activity and show you relevant Venngage ads on other sites as you browse the internet.

• Google Tag Manager
• Infographics
• Daily Infographics
• Graphic Design
• Graphs and Charts
• Data Visualization
• Human Resources
• Training and Development
• Beginner Guides

Blog Beginner Guides

What is a Case Study? [+6 Types of Case Studies]

By Ronita Mohan , Sep 20, 2021

Case studies have become powerful business tools. But what is a case study? What are the benefits of creating one? Are there limitations to the format?

If you’ve asked yourself these questions, our helpful guide will clear things up. Learn how to use a case study for business. Find out how cases analysis works in psychology and research.

We’ve also got examples of case studies to inspire you.

Haven’t made a case study before? You can easily  create a case study  with Venngage’s customizable templates.

CREATE A CASE STUDY

Click to jump ahead:

What is a case study, what is the case study method, benefits of case studies, limitations of case studies, types of case studies, faqs about case studies.

Case studies are research methodologies. They examine subjects, projects, or organizations to tell a story.

USE THIS TEMPLATE

Numerous sectors use case analyses. The social sciences, social work, and psychology create studies regularly.

Healthcare industries write reports on patients and diagnoses. Marketing case study examples , like the one below, highlight the benefits of a business product.

CREATE THIS REPORT TEMPLATE

Now that you know what a case study is, we explain how case reports are used in three different industries.

What is a business case study?

A business or marketing case study aims at showcasing a successful partnership. This can be between a brand and a client. Or the case study can examine a brand’s project.

There is a perception that case studies are used to advertise a brand. But effective reports, like the one below, can show clients how a brand can support them.

Hubspot created a case study on a customer that successfully scaled its business. The report outlines the various Hubspot tools used to achieve these results.

Hubspot also added a video with testimonials from the client company’s employees.

So, what is the purpose of a case study for businesses? There is a lot of competition in the corporate world. Companies are run by people. They can be on the fence about which brand to work with.

Business reports  stand out aesthetically, as well. They use  brand colors  and brand fonts . Usually, a combination of the client’s and the brand’s.

With the Venngage  My Brand Kit  feature, businesses can automatically apply their brand to designs.

A business case study, like the one below, acts as social proof. This helps customers decide between your brand and your competitors.

Don’t know how to design a report? You can learn  how to write a case study  with Venngage’s guide. We also share design tips and examples that will help you convert.

Related: 55+ Annual Report Design Templates, Inspirational Examples & Tips [Updated]

What is a case study in psychology?

In the field of psychology, case studies focus on a particular subject. Psychology case histories also examine human behaviors.

Case reports search for commonalities between humans. They are also used to prescribe further research. Or these studies can elaborate on a solution for a behavioral ailment.

The American Psychology Association  has a number of case studies on real-life clients. Note how the reports are more text-heavy than a business case study.

Famous psychologists such as Sigmund Freud and Anna O popularised the use of case studies in the field. They did so by regularly interviewing subjects. Their detailed observations build the field of psychology.

It is important to note that psychological studies must be conducted by professionals. Psychologists, psychiatrists and therapists should be the researchers in these cases.

Related: What Netflix’s Top 50 Shows Can Teach Us About Font Psychology [Infographic]

What is a case study in research?

Research is a necessary part of every case study. But specific research fields are required to create studies. These fields include user research, healthcare, education, or social work.

For example, this UX Design  report examined the public perception of a client. The brand researched and implemented new visuals to improve it. The study breaks down this research through lessons learned.

Clinical reports are a necessity in the medical field. These documents are used to share knowledge with other professionals. They also help examine new or unusual diseases or symptoms.

The pandemic has led to a significant increase in research. For example,  Spectrum Health  studied the value of health systems in the pandemic. They created the study by examining community outreach.

The pandemic has significantly impacted the field of education. This has led to numerous examinations on remote studying. There have also been studies on how students react to decreased peer communication.

Social work case reports often have a community focus. They can also examine public health responses. In certain regions, social workers study disaster responses.

You now know what case studies in various fields are. In the next step of our guide, we explain the case study method.

Return to Table of Contents

A case analysis is a deep dive into a subject. To facilitate this case studies are built on interviews and observations. The below example would have been created after numerous interviews.

Case studies are largely qualitative. They analyze and describe phenomena. While some data is included, a case analysis is not quantitative.

There are a few steps in the case method. You have to start by identifying the subject of your study. Then determine what kind of research is required.

In natural sciences, case studies can take years to complete. Business reports, like this one, don’t take that long. A few weeks of interviews should be enough.

The case method will vary depending on the industry. Reports will also look different once produced.

As you will have seen, business reports are more colorful. The design is also more accessible . Healthcare and psychology reports are more text-heavy.

Designing case reports takes time and energy. So, is it worth taking the time to write them? Here are the benefits of creating case studies.

• Collects large amounts of information
• Helps formulate hypotheses
• Builds the case for further research
• Discovers new insights into a subject
• Builds brand trust and loyalty
• Engages customers through stories

For example, the business study below creates a story around a brand partnership. It makes for engaging reading. The study also shows evidence backing up the information.

We’ve shared the benefits of why studies are needed. We will also look at the limitations of creating them.

Related: How to Present a Case Study like a Pro (With Examples)

There are a few disadvantages to conducting a case analysis. The limitations will vary according to the industry.

• Responses from interviews are subjective
• Subjects may tailor responses to the researcher
• Studies can’t always be replicated
• In certain industries, analyses can take time and be expensive
• Risk of generalizing the results among a larger population

These are some of the common weaknesses of creating case reports. If you’re on the fence, look at the competition in your industry.

Other brands or professionals are building reports, like this example. In that case, you may want to do the same.

There are six common types of case reports. Depending on your industry, you might use one of these types.

Descriptive case studies

Explanatory case studies, exploratory case reports, intrinsic case studies, instrumental case studies, collective case reports.

USE THIS TEMPLATE

We go into more detail about each type of study in the guide below.

Related:  15+ Professional Case Study Examples [Design Tips + Templates]

When you have an existing hypothesis, you can design a descriptive study. This type of report starts with a description. The aim is to find connections between the subject being studied and a theory.

Once these connections are found, the study can conclude. The results of this type of study will usually suggest how to develop a theory further.

A study like the one below has concrete results. A descriptive report would use the quantitative data as a suggestion for researching the subject deeply.

When an incident occurs in a field, an explanation is required. An explanatory report investigates the cause of the event. It will include explanations for that cause.

The study will also share details about the impact of the event. In most cases, this report will use evidence to predict future occurrences. The results of explanatory reports are definitive.

Note that there is no room for interpretation here. The results are absolute.

The study below is a good example. It explains how one brand used the services of another. It concludes by showing definitive proof that the collaboration was successful.

Another example of this study would be in the automotive industry. If a vehicle fails a test, an explanatory study will examine why. The results could show that the failure was because of a particular part.

Related: How to Write a Case Study [+ Design Tips]

An explanatory report is a self-contained document. An exploratory one is only the beginning of an investigation.

Exploratory cases act as the starting point of studies. This is usually conducted as a precursor to large-scale investigations. The research is used to suggest why further investigations are needed.

An exploratory study can also be used to suggest methods for further examination.

For example, the below analysis could have found inconclusive results. In that situation, it would be the basis for an in-depth study.

Intrinsic studies are more common in the field of psychology. These reports can also be conducted in healthcare or social work.

These types of studies focus on a unique subject, such as a patient. They can sometimes study groups close to the researcher.

The aim of such studies is to understand the subject better. This requires learning their history. The researcher will also examine how they interact with their environment.

For instance, if the case study below was about a unique brand, it could be an intrinsic study.

Once the study is complete, the researcher will have developed a better understanding of a phenomenon. This phenomenon will likely not have been studied or theorized about before.

Examples of intrinsic case analysis can be found across psychology. For example, Jean Piaget’s theories on cognitive development. He established the theory from intrinsic studies into his own children.

Related: What Disney Villains Can Tell Us About Color Psychology [Infographic]

This is another type of study seen in medical and psychology fields. Instrumental reports are created to examine more than just the primary subject.

When research is conducted for an instrumental study, it is to provide the basis for a larger phenomenon. The subject matter is usually the best example of the phenomenon. This is why it is being studied.

Assume it’s examining lead generation strategies. It may want to show that visual marketing is the definitive lead generation tool. The brand can conduct an instrumental case study to examine this phenomenon.

Collective studies are based on instrumental case reports. These types of studies examine multiple reports.

There are a number of reasons why collective reports are created:

• To provide evidence for starting a new study
• To find pattens between multiple instrumental reports
• To find differences in similar types of cases
• Gain a deeper understanding of a complex phenomenon
• Understand a phenomenon from diverse contexts

A researcher could use multiple reports, like the one below, to build a collective case report.

Related: 10+ Case Study Infographic Templates That Convert

What makes a case study a case study?

A case study has a very particular research methodology. They are an in-depth study of a person or a group of individuals. They can also study a community or an organization. Case reports examine real-world phenomena within a set context.

How long should a case study be?

The length of studies depends on the industry. It also depends on the story you’re telling. Most case studies should be at least 500-1500 words long. But you can increase the length if you have more details to share.

What should you ask in a case study?

The one thing you shouldn’t ask is ‘yes’ or ‘no’ questions. Case studies are qualitative. These questions won’t give you the information you need.

Ask your client about the problems they faced. Ask them about solutions they found. Or what they think is the ideal solution. Leave room to ask them follow-up questions. This will help build out the study.

How to present a case study?

When you’re ready to present a case study, begin by providing a summary of the problem or challenge you were addressing. Follow this with an outline of the solution you implemented, and support this with the results you achieved, backed by relevant data. Incorporate visual aids like slides, graphs, and images to make your case study presentation more engaging and impactful.

Now you know what a case study means, you can begin creating one. These reports are a great tool for analyzing brands. They are also useful in a variety of other fields.

Use a visual communication platform like Venngage to design case studies. With Venngage’s templates, you can design easily. Create branded, engaging reports, all without design experience.

• Privacy Policy

Buy Me a Coffee

Home » Case Study – Methods, Examples and Guide

Case Study – Methods, Examples and Guide

Table of Contents

A case study is a research method that involves an in-depth examination and analysis of a particular phenomenon or case, such as an individual, organization, community, event, or situation.

It is a qualitative research approach that aims to provide a detailed and comprehensive understanding of the case being studied. Case studies typically involve multiple sources of data, including interviews, observations, documents, and artifacts, which are analyzed using various techniques, such as content analysis, thematic analysis, and grounded theory. The findings of a case study are often used to develop theories, inform policy or practice, or generate new research questions.

Types of Case Study

Types and Methods of Case Study are as follows:

Single-Case Study

A single-case study is an in-depth analysis of a single case. This type of case study is useful when the researcher wants to understand a specific phenomenon in detail.

For Example , A researcher might conduct a single-case study on a particular individual to understand their experiences with a particular health condition or a specific organization to explore their management practices. The researcher collects data from multiple sources, such as interviews, observations, and documents, and uses various techniques to analyze the data, such as content analysis or thematic analysis. The findings of a single-case study are often used to generate new research questions, develop theories, or inform policy or practice.

Multiple-Case Study

A multiple-case study involves the analysis of several cases that are similar in nature. This type of case study is useful when the researcher wants to identify similarities and differences between the cases.

For Example, a researcher might conduct a multiple-case study on several companies to explore the factors that contribute to their success or failure. The researcher collects data from each case, compares and contrasts the findings, and uses various techniques to analyze the data, such as comparative analysis or pattern-matching. The findings of a multiple-case study can be used to develop theories, inform policy or practice, or generate new research questions.

Exploratory Case Study

An exploratory case study is used to explore a new or understudied phenomenon. This type of case study is useful when the researcher wants to generate hypotheses or theories about the phenomenon.

For Example, a researcher might conduct an exploratory case study on a new technology to understand its potential impact on society. The researcher collects data from multiple sources, such as interviews, observations, and documents, and uses various techniques to analyze the data, such as grounded theory or content analysis. The findings of an exploratory case study can be used to generate new research questions, develop theories, or inform policy or practice.

Descriptive Case Study

A descriptive case study is used to describe a particular phenomenon in detail. This type of case study is useful when the researcher wants to provide a comprehensive account of the phenomenon.

For Example, a researcher might conduct a descriptive case study on a particular community to understand its social and economic characteristics. The researcher collects data from multiple sources, such as interviews, observations, and documents, and uses various techniques to analyze the data, such as content analysis or thematic analysis. The findings of a descriptive case study can be used to inform policy or practice or generate new research questions.

Instrumental Case Study

An instrumental case study is used to understand a particular phenomenon that is instrumental in achieving a particular goal. This type of case study is useful when the researcher wants to understand the role of the phenomenon in achieving the goal.

For Example, a researcher might conduct an instrumental case study on a particular policy to understand its impact on achieving a particular goal, such as reducing poverty. The researcher collects data from multiple sources, such as interviews, observations, and documents, and uses various techniques to analyze the data, such as content analysis or thematic analysis. The findings of an instrumental case study can be used to inform policy or practice or generate new research questions.

Case Study Data Collection Methods

Here are some common data collection methods for case studies:

Interviews involve asking questions to individuals who have knowledge or experience relevant to the case study. Interviews can be structured (where the same questions are asked to all participants) or unstructured (where the interviewer follows up on the responses with further questions). Interviews can be conducted in person, over the phone, or through video conferencing.

Observations

Observations involve watching and recording the behavior and activities of individuals or groups relevant to the case study. Observations can be participant (where the researcher actively participates in the activities) or non-participant (where the researcher observes from a distance). Observations can be recorded using notes, audio or video recordings, or photographs.

Documents can be used as a source of information for case studies. Documents can include reports, memos, emails, letters, and other written materials related to the case study. Documents can be collected from the case study participants or from public sources.

Surveys involve asking a set of questions to a sample of individuals relevant to the case study. Surveys can be administered in person, over the phone, through mail or email, or online. Surveys can be used to gather information on attitudes, opinions, or behaviors related to the case study.

Artifacts are physical objects relevant to the case study. Artifacts can include tools, equipment, products, or other objects that provide insights into the case study phenomenon.

How to conduct Case Study Research

Conducting a case study research involves several steps that need to be followed to ensure the quality and rigor of the study. Here are the steps to conduct case study research:

• Define the research questions: The first step in conducting a case study research is to define the research questions. The research questions should be specific, measurable, and relevant to the case study phenomenon under investigation.
• Select the case: The next step is to select the case or cases to be studied. The case should be relevant to the research questions and should provide rich and diverse data that can be used to answer the research questions.
• Collect data: Data can be collected using various methods, such as interviews, observations, documents, surveys, and artifacts. The data collection method should be selected based on the research questions and the nature of the case study phenomenon.
• Analyze the data: The data collected from the case study should be analyzed using various techniques, such as content analysis, thematic analysis, or grounded theory. The analysis should be guided by the research questions and should aim to provide insights and conclusions relevant to the research questions.
• Draw conclusions: The conclusions drawn from the case study should be based on the data analysis and should be relevant to the research questions. The conclusions should be supported by evidence and should be clearly stated.
• Validate the findings: The findings of the case study should be validated by reviewing the data and the analysis with participants or other experts in the field. This helps to ensure the validity and reliability of the findings.
• Write the report: The final step is to write the report of the case study research. The report should provide a clear description of the case study phenomenon, the research questions, the data collection methods, the data analysis, the findings, and the conclusions. The report should be written in a clear and concise manner and should follow the guidelines for academic writing.

Examples of Case Study

Here are some examples of case study research:

• The Hawthorne Studies : Conducted between 1924 and 1932, the Hawthorne Studies were a series of case studies conducted by Elton Mayo and his colleagues to examine the impact of work environment on employee productivity. The studies were conducted at the Hawthorne Works plant of the Western Electric Company in Chicago and included interviews, observations, and experiments.
• The Stanford Prison Experiment: Conducted in 1971, the Stanford Prison Experiment was a case study conducted by Philip Zimbardo to examine the psychological effects of power and authority. The study involved simulating a prison environment and assigning participants to the role of guards or prisoners. The study was controversial due to the ethical issues it raised.
• The Challenger Disaster: The Challenger Disaster was a case study conducted to examine the causes of the Space Shuttle Challenger explosion in 1986. The study included interviews, observations, and analysis of data to identify the technical, organizational, and cultural factors that contributed to the disaster.
• The Enron Scandal: The Enron Scandal was a case study conducted to examine the causes of the Enron Corporation’s bankruptcy in 2001. The study included interviews, analysis of financial data, and review of documents to identify the accounting practices, corporate culture, and ethical issues that led to the company’s downfall.
• The Fukushima Nuclear Disaster : The Fukushima Nuclear Disaster was a case study conducted to examine the causes of the nuclear accident that occurred at the Fukushima Daiichi Nuclear Power Plant in Japan in 2011. The study included interviews, analysis of data, and review of documents to identify the technical, organizational, and cultural factors that contributed to the disaster.

Application of Case Study

Case studies have a wide range of applications across various fields and industries. Here are some examples:

Business and Management

Case studies are widely used in business and management to examine real-life situations and develop problem-solving skills. Case studies can help students and professionals to develop a deep understanding of business concepts, theories, and best practices.

Case studies are used in healthcare to examine patient care, treatment options, and outcomes. Case studies can help healthcare professionals to develop critical thinking skills, diagnose complex medical conditions, and develop effective treatment plans.

Case studies are used in education to examine teaching and learning practices. Case studies can help educators to develop effective teaching strategies, evaluate student progress, and identify areas for improvement.

Social Sciences

Case studies are widely used in social sciences to examine human behavior, social phenomena, and cultural practices. Case studies can help researchers to develop theories, test hypotheses, and gain insights into complex social issues.

Law and Ethics

Case studies are used in law and ethics to examine legal and ethical dilemmas. Case studies can help lawyers, policymakers, and ethical professionals to develop critical thinking skills, analyze complex cases, and make informed decisions.

Purpose of Case Study

The purpose of a case study is to provide a detailed analysis of a specific phenomenon, issue, or problem in its real-life context. A case study is a qualitative research method that involves the in-depth exploration and analysis of a particular case, which can be an individual, group, organization, event, or community.

The primary purpose of a case study is to generate a comprehensive and nuanced understanding of the case, including its history, context, and dynamics. Case studies can help researchers to identify and examine the underlying factors, processes, and mechanisms that contribute to the case and its outcomes. This can help to develop a more accurate and detailed understanding of the case, which can inform future research, practice, or policy.

Case studies can also serve other purposes, including:

• Illustrating a theory or concept: Case studies can be used to illustrate and explain theoretical concepts and frameworks, providing concrete examples of how they can be applied in real-life situations.
• Developing hypotheses: Case studies can help to generate hypotheses about the causal relationships between different factors and outcomes, which can be tested through further research.
• Providing insight into complex issues: Case studies can provide insights into complex and multifaceted issues, which may be difficult to understand through other research methods.
• Informing practice or policy: Case studies can be used to inform practice or policy by identifying best practices, lessons learned, or areas for improvement.

Advantages of Case Study Research

There are several advantages of case study research, including:

• In-depth exploration: Case study research allows for a detailed exploration and analysis of a specific phenomenon, issue, or problem in its real-life context. This can provide a comprehensive understanding of the case and its dynamics, which may not be possible through other research methods.
• Rich data: Case study research can generate rich and detailed data, including qualitative data such as interviews, observations, and documents. This can provide a nuanced understanding of the case and its complexity.
• Holistic perspective: Case study research allows for a holistic perspective of the case, taking into account the various factors, processes, and mechanisms that contribute to the case and its outcomes. This can help to develop a more accurate and comprehensive understanding of the case.
• Theory development: Case study research can help to develop and refine theories and concepts by providing empirical evidence and concrete examples of how they can be applied in real-life situations.
• Practical application: Case study research can inform practice or policy by identifying best practices, lessons learned, or areas for improvement.
• Contextualization: Case study research takes into account the specific context in which the case is situated, which can help to understand how the case is influenced by the social, cultural, and historical factors of its environment.

Limitations of Case Study Research

There are several limitations of case study research, including:

• Limited generalizability : Case studies are typically focused on a single case or a small number of cases, which limits the generalizability of the findings. The unique characteristics of the case may not be applicable to other contexts or populations, which may limit the external validity of the research.
• Biased sampling: Case studies may rely on purposive or convenience sampling, which can introduce bias into the sample selection process. This may limit the representativeness of the sample and the generalizability of the findings.
• Subjectivity: Case studies rely on the interpretation of the researcher, which can introduce subjectivity into the analysis. The researcher’s own biases, assumptions, and perspectives may influence the findings, which may limit the objectivity of the research.
• Limited control: Case studies are typically conducted in naturalistic settings, which limits the control that the researcher has over the environment and the variables being studied. This may limit the ability to establish causal relationships between variables.
• Time-consuming: Case studies can be time-consuming to conduct, as they typically involve a detailed exploration and analysis of a specific case. This may limit the feasibility of conducting multiple case studies or conducting case studies in a timely manner.
• Resource-intensive: Case studies may require significant resources, including time, funding, and expertise. This may limit the ability of researchers to conduct case studies in resource-constrained settings.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Questionnaire – Definition, Types, and Examples

Observational Research – Methods and Guide

Quantitative Research – Methods, Types and...

Qualitative Research Methods

Explanatory Research – Types, Methods, Guide

Survey Research – Types, Methods, Examples

How to Write a Case Study: A Breakdown of Requirements

It can take months to develop a case study. First, a topic must be chosen. Then the researcher must state his hypothesis, and make certain it lines up with the chosen topic. Then all the research must be completed. The case study can require both quantitative and qualitative research, as well as interviews with subjects. Once that is all done, it is time to write the case study.

Not all case studies are written the same. Depending on the size and topic of the study, it could be hundreds of pages long. Regardless of the size, the case study should have four main sections. These sections are:

1. Introduction

2. Background

3. Presentation of Findings

4. Conclusion

The Introduction

The introduction should set the stage for the case study, and state the thesis for the report. The intro must clearly articulate what the study's intention is, as well as how you plan on explaining and answering the thesis.

Again, remember that a case study is not a formal scientific research report that will only be read by scientists. The case study must be able to be read and understood by the layperson, and should read almost as a story, with a clear narrative.

As the reader reads the introduction, they should fully understand what the study is about, and why it is important. They should have a strong foundation for the background they will learn about in the next section.

The introduction should not be long. You must be able to introduce your topic in one or two paragraphs. Ideally, the introduction is one paragraph of about 3-5 sentences.

The Background

The background should detail what information brought the researcher to pose his hypothesis. It should clearly explain the subject or subjects, as well as their background information. And lastly, the background must give the reader a full understanding of the issue at hand, and what process will be taken with the study. Photos and videos are always helpful when applicable.

When writing the background, the researcher must explain the research methods used, and why. The type of research used will be dependent on the type of case study. The reader should have a clear idea why a particular type of research is good for the field and type of case study.

For example, a case study that is trying to determine what causes PTSD in veterans will heavily use interviews as a research method. Directly interviewing subjects garners invaluable research for the researcher. If possible, reference studies that prove this.

Again, as with the introduction, you do not want to write an extremely long background. It is important you provide the right amount of information, as you do not want to bore your readers with too much information, and you don't want them under-informed.

How much background information should a case study provide? What would happen if the case study had too much background info?

What would happen if the case study had too little background info?

The Presentation of Findings

While a case study might use scientific facts and information, a case study should not read as a scientific research journal or report. It should be easy to read and understand, and should follow the narrative determined in the first step.

The presentation of findings should clearly explain how the topic was researched, and summarize what the results are. Data should be summarized as simply as possible so that it is understandable by people without a scientific background. The researcher should describe what was learned from the interviews, and how the results answered the questions asked in the introduction.

When writing up the report, it is important to set the scene. The writer must clearly lay out all relevant facts and detail the most important points. While this section may be lengthy, you do not want to overwhelm the reader with too much information.

The Conclusion

The final section of the study is the conclusion. The purpose of the study isn't necessarily to solve the problem, only to offer possible solutions. The final summary should be an end to the story.

Remember, the case study is about asking and answering questions. The conclusion should answer the question posed by the researcher, but also leave the reader with questions of his own. The researcher wants the reader to think about the questions posed in the study, and be free to come to their own conclusions as well.

When reading the conclusion, the reader should be able to have the following takeaways:

Was there a solution provided? If so, why was it chosen?

Was the solution supported with solid evidence?

Did the personal experiences and interviews support the solution?

The conclusion should also make any recommendations that are necessary. What needs to be done, and you exactly should do it? In the case of the vets with PTSD, once a cause is determined, who is responsible for making sure the needs of the veterans are met?

English Writing Standards For Case Studies

When writing the case study, it is important to follow standard academic and scientific rules when it comes to spelling and grammar.

Spelling and Grammar

It should go without saying that a thorough spell check should be done. Remember, many case studies will require words or terms that are not in standard online dictionaries, so it is imperative the correct spelling is used. If possible, the first draft of the case study should be reviewed and edited by someone other than yourself.

Case studies are normally written in the past tense, as the report is detailing an event or topic that has since passed. The report should be written using a very logical and clear tone. All case studies are scientific in nature and should be written as such.

The First Draft

You do not sit down and write the case study in one day. It is a long and detailed process, and it must be done carefully and with precision. When you sit down to first start writing, you will want to write in plain English, and detail the what, when and how.

When writing the first draft, note any relevant assumptions. Don't immediately jump to any conclusions; just take notes of any initial thoughts. You are not looking for solutions yet. In the first draft use direct quotes when needed, and be sure to identify and qualify all information used.

If there are any issues you do not understand, the first draft is where it should be identified. Make a note so you return to review later. Using a spreadsheet program like Excel or Google Sheets is very valuable during this stage of the writing process, and can help keep you and your information and data organized.

The Second Draft

To prepare the second draft, you will want to assemble everything you have written thus far. You want to reduce the amount of writing so that the writing is tightly written and cogent. Remember, you want your case study to be interesting to read.

When possible, you should consider adding images, tables, maps, or diagrams to the text to make it more interesting for the reader. If you use any of these, make sure you have permission to use them. You cannot take an image from the Internet and use it without permission.

Once you have completed the second draft, you are not finished! It is imperative you have someone review your work. This could be a coworker, friend, or trusted colleague. You want someone who will give you an honest review of your work, and is willing to give you feedback, whether positive or negative.

Remember, you cannot proofread enough! You do not want to risk all of your hard work and research, and end up with a final case study that has spelling or grammatical errors. One typo could greatly hurt your project and damage your reputation in your field.

All case studies should follow LIT – Logical – Inclusive – Thorough.

The case study obviously must be logical. There can be no guessing or estimating. This means that the report must state what was observed, but cannot include any opinion or assumptions that might come from such an observation.

For example, if a veteran subject arrives at an interview holding an empty liquor bottle and is slurring his words, that observation must be made. However, the researcher cannot make the inference that the subject was intoxicated. The report can only include the facts.

With the Genie case, researchers witnessed Genie hitting herself and practicing self-harm. It could be assumed that she did this when she was angry. However, this wasn't always the case. She would also hit herself when she was afraid, bored or apprehensive. It is essential that researchers not guess or infer.

In order for a report to be inclusive, it must contain ALL data and findings. The researcher cannot pick and choose which data or findings to use in the report.

Using the example above, if a veteran subject arrives for an interview holding an empty liquor bottle and is slurring his words; any and all additional information that can be garnered should be recorded. For instance, what the subject was wearing, what was his demeanor, was he able to speak and communicate, etc.

When observing a man who might be drunk, it can be easy to make assumptions. However, the researcher cannot allow personal biases or beliefs to sway the findings. Any and all relevant facts must be included, regardless of size or perceived importance. Remember, small details might not seem relevant at the time of the interview. But once it is time to catalog the findings, small details might become important.

The last tip is to be thorough. It is important to delve into every observation. The researcher shouldn't just write down what they see and move on. It is essential to detail as much as possible.

For example, when interviewing veteran subjects, there interview responses are not the only information that should be garnered from the interview. The interviewer should use all senses when detailing their subject.

How does the subject appear? Is he clean? How is he dressed?

How does his voice sound? Is he speaking clearly and making cohesive thoughts? Does his voice sound raspy? Does he speak with a whisper, or does he speak too loudly?

Does the subject smell? Is he wearing cologne, or can you smell that he hasn't bathed or washed his clothes? What do his clothes look like? Is he well dressed, or does he wear casual clothes?

What is the background of the subject? What are his current living arrangements? Does he have supportive family and friends? Is he a loner who doesn't have a solid support system? Is the subject working? If so, is he happy with the job? If he is not employed, why is that? What makes the subject unemployable?

Case Studies in Marketing

We have already determined that case studies are very valuable in the business world. This is particularly true in the marketing field, which includes advertising and public relations. While case studies are almost all the same, marketing case studies are usually more dependent on interviews and observations.

Well-Known Marketing Case Studies

DeBeers is a diamond company headquartered in Luxembourg, and based in South Africa. It is well known for its logo, "A diamond is forever", which has been voted the best advertising slogan of the 20 th century.

Many studies have been done about DeBeers, but none are as well known as their marketing case study, and how they positioned themselves to be the most successful and well-known diamond company in the world.

DeBeers developed the idea for a diamond engagement ring. They also invented the "eternity band", which is a ring that has diamonds going all around it, signifying that long is forever.

They also invented the three-stone ring, signifying the past, present and future. De Beers was the first company to attribute their products, diamonds to the idea of love and romance. They originated the idea that an engagement ring should cost two-months salary.

The two-month salary standard is particularly unique, in that it is totally subjective. A ring should mean the same whether the man makes $25,000 a year or $250,000. And yet, the standard sticks due to DeBeers incredible marketing skills.

The De Beers case study is one of the most famous studies when it comes to both advertising and marketing, and is used worldwide as the ultimate example of a successful ongoing marketing campaign.

Planning the Market Research

The most important parts of the marketing case study are:

1. The case study's questions

2. The study's propositions

3. How information and data will be analyzed

4. The logic behind what is being proposed

5. How the findings will be interpreted

The study's questions should be either "how" or "why" questions, and their definitions are the researchers first job. These questions will help determine the study's goals.

Not every case study has a proposition. If you are doing an exploratory study, you will not have propositions. Instead, you will have a stated purpose, which will determine whether your study is successful, or not.

How the information will be analyzed will depend on what the topic is. This would vary depending on whether it was a person, group, or organization. Event and place studies are done differently.

When setting up your research, you will want to follow case study protocol. The protocol should have the following sections:

1. An overview of the case study, including the objectives, topic and issues.

2. Procedures for gathering information and conducting interviews.

3. Questions that will be asked during interviews and data collection.

4. A guide for the final case study report.

When deciding upon which research methods to use, these are the most important:

1. Documents and archival records

2 . Interviews

3. Direct observations (and indirect when possible)

4. Indirect observations, or observations of subjects

5. Physical artifacts and tools

Documents could include almost anything, including letters, memos, newspaper articles, Internet articles, other case studies, or any other document germane to the study.

Developing the Case Study

Developing a marketing case study follows the same steps and procedures as most case studies. It begins with asking a question, "what is missing?"

1. What is the background of the case study? Who requested the study to be done and why? What industry is the study in, and where will the study take place? What marketing needs are you trying to address?

2. What is the problem that needs a solution? What is the situation, and what are the risks? What are you trying to prove?

3. What questions are required to analyze the problem? What questions might the reader of the study have?

4. What tools are required to analyze the problem? Is data analysis necessary? Can the study use just interviews and observations, or will it require additional information?

5. What is your current knowledge about the problem or situation? How much background information do you need to procure? How will you obtain this background info?

6. What other information do you need to know to successfully complete the study?

7. How do you plan to present the report? Will it be a simple written report, or will you add PowerPoint presentations or images or videos? When is the report due? Are you giving yourself enough time to complete the project?

Formulating the Marketing Case Study

1. What is the marketing problem? Most case studies begin with a problem that management or the marketing department is facing. You must fully understand the problem and what caused it. That is when you can start searching for a solution.

However, marketing case studies can be difficult to research. You must turn a marketing problem into a research problem. For example, if the problem is that sales are not growing, you must translate that to a research problem.

What could potential research problems be?

Research problems could be poor performance or poor expectations. You want a research problem because then you can find an answer. Management problems focus on actions, such as whether to advertise more, or change advertising strategies. Research problems focus on finding out how to solve the management problem.

Method of Inquiry

As with the research for most case studies, the scientific method is standard. It allows you to use existing knowledge as a starting point. The scientific method has the following steps:

1. Ask a question – formulate a problem

2. Do background research

3. Formulate a problem

4. Develop/construct a hypothesis

5. Make predictions based on the hypothesis

6. Do experiments to test the hypothesis

7 . Conduct the test/experiment

8 . Analyze and communicate the results

The above terminology is very similar to the research process. The main difference is that the scientific method is objective and the research process is subjective. Quantitative research is based on impartial analysis, and qualitative research is based on personal judgment.

Research Method

After selecting the method of inquiry, it is time to decide on a research method. There are two main research methodologies, experimental research and non-experimental research.

Experimental research allows you to control the variables and to manipulate any of the variables that influence the study.

Non-experimental research allows you to observe, but not intervene. You just observe and then report your findings.

Research Design

The design is the plan for how you will conduct the study, and how you will collect the data. The design is the scientific method you will use to obtain the information you are seeking.

Data Collection

There are many different ways to collect data, with the two most important being interviews and observation.

Interviews are when you ask people questions and get a response. These interviews can be done face-to-face, by telephone, the mail, email, or even the Internet. This category of research techniques is survey research. Interviews can be done in both experimental and non-experimental research.

Observation is watching a person or company's behavior. For example, by observing a persons buying behavior, you could predict how that person will make purchases in the future.

When using interviews or observation, it is required that you record your results. How you record the data will depend on which method you use. As with all case studies, using a research notebook is key, and will be the heart of the study.

Sample Design

When developing your case study, you won't usually examine an entire population; those are done by larger research projects. Your study will use a sample, which is a small representation of the population. When designing your sample, be prepared to answer the following questions:

1. From which type of population should the sample be chosen?

2. What is the process for the selection of the sample?

3. What will be the size of the sample?

There are two ways to select a sample from the general population; probability and non-probability sampling. Probability sampling uses random sampling of everyone in the population. Non-probability sampling uses the judgment of the researcher.

The last step of designing your sample is to determine the sample size. This can depend on cost and accuracy. Larger samples are better and more accurate, but they can also be costly.

Analysis of the Data

In order to use the data, it first must be analyzed. How you analyze the data should be decided upon as early in the process as possible, and will vary depending on the type of info you are collecting, and the form of measurement being used. As stated repeatedly, make sure you keep track of everything in the research notebook.

The Marketing Case Study Report

The final stage of the process is the marketing case study. The final study will include all of the information, as well as detail the process. It will also describe the results, conclusions, and any recommendations. It must have all the information needed so that the reader can understand the case study.

As with all case studies, it must be easy to read. You don't want to use info that is too technical; otherwise you could potentially overwhelm your reader. So make sure it is written in plain English, with scientific and technical terms kept to a minimum.

Using Your Case Study

Once you have your finished case study, you have many opportunities to get that case study in front of potential customers. Here is a list of the ways you can use your case study to help your company's marketing efforts.

1. Have a page on your website that is dedicated to case studies. The page should have a catchy name and list all of the company's case studies, beginning with the most recent. Next to each case study list its goals and results.

2. Put the case study on your home page. This will put your study front and center, and will be immediately visible when customers visit your web page. Make sure the link isn't hidden in an area rarely visited by guests. You can highlight the case study for a few weeks or months, or until you feel your study has received enough looks.

3. Write a blog post about your case study. Obviously you must have a blog for this to be successful. This is a great way to give your case study exposure, and it allows you to write the post directly addressing your audience's needs.

4 . Make a video from your case study. Videos are more popular than ever, and turning a lengthy case study into a brief video is a great way to get your case study in front of people who might not normally read a case study.

5. Use your case study on a landing page. You can pull quotes from the case study and use those on product pages. Again, this format works best when you use market segmentation.

6. Post about your case studies on social media. You can share links on Twitter, Facebook and LinkedIn. Write a little interesting tidbit, enough to capture your client's interest, and then place the link.

7 . Use your case study in your email marketing. This is most effective if your email list is segmented, and you can direct your case study to those most likely to be receptive to it.

8. Use your case studies in your newsletters. This can be especially effective if you use segmentation with your newsletters, so you can gear the case study to those most likely to read and value it.

• Course Catalog
• Group Discounts
• Gift Certificates
• For Libraries
• CEU Verification
• Medical Terminology
• Accounting Course
• Writing Basics
• QuickBooks Training
• Proofreading Class
• Sensitivity Training
• Excel Certificate
• Teach Online
• Terms of Service
• Privacy Policy

• Share full article

Advertisement

Supported by

How Fake News Goes Viral: A Case Study

By Sapna Maheshwari

Eric Tucker, a 35-year-old co-founder of a marketing company in Austin, Tex., had just about 40 Twitter followers. But his recent tweet about paid protesters being bused to demonstrations against President-elect Donald J. Trump fueled a nationwide conspiracy theory — one that Mr. Trump joined in promoting. 

Mr. Tucker's post was shared at least 16,000 times on Twitter and more than 350,000 times on Facebook. The problem is that Mr. Tucker got it wrong. There were no such buses packed with paid protesters.

But that didn't matter.

While some fake news is produced purposefully by  teenagers in the Balkans  or  entrepreneurs in the United States  seeking to make money from advertising, false information can also arise from misinformed social media posts by regular people that are seized on and spread through a hyperpartisan blogosphere.

Here, The New York Times deconstructs how Mr. Tucker’s now-deleted declaration on Twitter the night after the election turned into a fake-news phenomenon. It is an example of how, in an ever-connected world where speed often takes precedence over truth, an observation by a private citizen can quickly become a talking point, even as it is being proved false.

Nov. 9, shortly after 8 p.m. Eastern

Mr. Tucker, who had taken photos of a large group of buses he saw near downtown Austin earlier in the day because he thought it was unusual, saw reports of protests against Mr. Trump in the city and decided the two were connected. He posted three of the images with the declaration: “Anti-Trump protestors in Austin today are not as organic as they seem. Here are the busses they came in. #fakeprotests #trump2016 #austin”

Mr. Tucker said he had performed a Google search to see if any conferences were being held in the area but did not find anything. (The buses were, in fact, hired by a company called Tableau Software, which was holding a conference that drew more than 13,000 people.)

“I did think in the back of my mind there could be other explanations, but it just didn’t seem plausible,” he said in an interview, noting that he had posted as a “private citizen who had a tiny Twitter following.”

He added, “I’m also a very busy businessman and I don’t have time to fact-check everything that I put out there, especially when I don’t think it’s going out there for wide consumption.”

Nov. 10, 12:49 a.m. Eastern

Several hours later, the first important step occurred. Mr. Tucker’s tweet was posted to the main Reddit community for Mr. Trump under the heading: “BREAKING: They found the buses! Dozens lined up just blocks away from the Austin protests.” It quickly generated more than 300 comments, some of which blamed the protests on George Soros, the liberal billionaire philanthropist, who is a frequent target of the group.

Nov. 10, around 9 a.m. Eastern

The next morning, the frenzy began. A user on Free Republic, a conservative discussion forum, linked to the Reddit thread about Mr. Tucker’s post, increasing the attention and spreading it further into the online world. Later, Facebook pages like Robertson Family Values, which is named for but not affiliated with the stars of “Duck Dynasty,” and Donald Trump Commander in Chief 2020, linked to the Free Republic discussion. Those posts were shared more than 5,000 times each, and more than 300,000 Facebook users have linked to the Free Republic thread.

Nov. 10, late morning through the afternoon

Sean Hughes, the director of corporate affairs for the bus company Coach USA North America, said he learned about the rumor involving its vehicles after receiving a couple of curious emails and hearing from a friend in New Jersey who had seen the claim on Facebook and wanted to know if it was true.

A reporter at the Fox television station in Austin contacted Mr. Hughes later that day, and he responded with a statement noting that “at no point were Coach USA buses involved in the Austin protests.” But that did little to stem the online furor.

“That reporter said, ‘You’re probably going to get a lot more phone calls because it’s all over the place,’” Mr. Hughes said in an interview on Thursday.

“You’re the second journalist to actually call me to see what was going on, no bloggers or anything, and we’re easily accessible on our website,” Mr. Hughes said.

He added, “I just kind of wish people looked into facts before they go ahead and do something like that, because it could be easily debunked based on a quick phone call or two, or a couple emails.”

During this time, Mr. Tucker was replying to queries on Twitter about whether he had proof to support his claim. He confirmed in a post that he “did not see loading or unloading” but that the buses were “quite near protests at right timing.” That admitted lack of evidence, however, had little effect. By about noon, Mr. Tucker’s initial post had been retweeted and liked more than 5,000 times. There was more to come.

Nov. 10, evening

Around 6 p.m., the conservative blog Gateway Pundit posted a story using Mr. Tucker’s images under the headline “Figures. Anti-Trump Protesters Were Bussed in to Austin #FakeProtests.” The post, which included a mention of “Soros money,” has been shared on Facebook more than 44,000 times, according to statistics on the website .

The story line became a prominent one throughout the conservative blogosphere, with other sites incorporating Mr. Tucker’s tweet into posts about paid protesters, referring to him as an eyewitness in Austin.

Then, shortly after 9 p.m., Mr. Trump sent this tweet:

Mr. Tucker considered deleting his tweet about the buses, but Mr. Trump’s message emboldened him. “I figured if he were to say something like that, I might be barking up the same tree,” Mr. Tucker said.

When asked if Mr. Trump might have been relying, at least tangentially, on the erroneous message he had sent about the buses, Mr. Tucker said, “I don’t want to say why Trump tweeted when he tweeted. I just don’t know and I truthfully don’t think any of us will ever know.”

Doreen Jarman, a spokeswoman for Tableau, said the company issued a statement to the local television station KVUE and The Austin American-Statesman on Nov. 11, saying that the buses were connected to the company’s conference.

The American-Statesman posted an article online shortly after noon, said Asher Price, the article’s author. Around 2 p.m., Mr. Tucker tweeted a link to his blog, where he acknowledged that he could have been “flat wrong,” and mentioned that he had voted for Gary Johnson. The rumor-checking website Snopes also debunked the claim that the buses were connected to any protests. None of this seemed to have much impact.

Mr. Tucker’s initial tweet continued to generate thousands of shares on Facebook through Free Republic and pages like Right Wing News and Joe the Plumber.

After midnight, Mr. Tucker deleted his original tweet, then posted an image of it stamped with the word “false” for posterity. It did not receive much attention.

After a week, that message had 29 retweets and 27 likes. The Snopes article has been shared about 5,800 times according to its website, a fraction of the number for the fake version of the news. Faced with the impact of his initial tweet, Mr. Tucker, who now has about 960 Twitter followers, allowed himself a moment of reflection.

“Anytime you see me in the future going out there where I think there’s going to be a big audience, I can assure you I’m going to try my best to be balanced with the facts and be very clear about what is opinion and what is not,” Mr. Tucker said.

If he could go back, he said, “I might have still tweeted it but very differently. I think it goes without saying I would have tried to make a more objective statement.”

Sapna Maheshwari covers advertising. She has won reporting awards from the Society of American Business Editors and Writers and the Newswomen’s Club of New York and was on Time’s list of “140 Best Twitter Feeds of 2014.” More about Sapna Maheshwari

• Case Studies

RECENTLY UPDATED

Using Go at Google

Go was created at Google in 2007, and since then, engineering teams across Google have adopted Go to build products and services at massive scale. Learn more arrow_forward

PayPal Taps Go to Modernize and Scale

Go’s value in producing clean, efficient code that readily scales as software deployment scales made the language a strong fit to support PayPal’s goals. Learn more arrow_forward

American Express Uses Go for Payments & Rewards

Go provides American Express with the speed and scalability it needs for both its payment and rewards networks. Learn more arrow_forward

Allegro – Writing a very fast cache service with millions of entries in Go

“Finally, we sped up our application from more than 2.5 seconds to less than 250 milliseconds for the longest request.”

View Case Study

Go provides American Express with the speed and scalability it needs for both its payment and rewards networks.

How Armut Labs use Go

Learn about how Armut Labs reduced resource consumption and API response time after moving from C# and .net core to Go.

Bitly - Why We Write Everything in Go

In 2014, we wrote a little open source project called NSQ (nsq.io) and put a promising new language called Go through its paces. We liked what we saw so much that we started writing everything new in Go, and soon thereafter we began porting all legacy services to Go as well.

Capital One - A Serverless and Go Journey

At the time, no single team member knew Go, but within a month, everyone was writing in Go and we were building out the endpoints. It was the flexibility, how easy it was to use, and the really cool concept behind Go (how Go handles native concurrency, garbage collection, and of course safety+speed.) that helped engage us during the build. Also, who can beat that cute mascot!

Graceful upgrades in Go

Cloudflare speeds up and protects millions of websites, APIs, SaaS services, and other properties connected to the Internet. “Go is at the heart of CloudFlare’s services including handling compression for high-latency HTTP connections, our entire DNS infrastructure, SSL, load testing and more.”

Cockroach Labs - Why We Chose to Build Our Database with Go

Go's performance benefits, garbage collection, and low barrier to entry made it a great fit for CockroachDB.

How Curve is getting ahead with Golang

Curve shares how Go's efficiency, standard library, and thriving community help them move banking to the cloud.

Dropbox - Open sourcing our Go libraries

About a year ago, we decided to migrate our performance-critical backends from Python to Go to leverage better concurrency support and faster execution speed. ... At this point, we have successfully moved major parts of our infrastructure to Go.

How Facebook built an entity framework in Go

Learn about a Facebook engineering team's decision to write a new entity framework (ORM) in Go.

Go was created at Google in 2007, and since then, engineering teams across Google have adopted Go to build products and services at massive scale.

Bigslice - A cluster computing system in Go

At GRAIL, we use the Go programming language for most of our bioinformatics, data processing, and machine learning tasks. Go’s simplicity makes it easy for newcomers to learn; its transparent runtime semantics makes it easy to reason about performance; and its ability to control data layout and allocation makes it possible to write highly performant data processing code.

MercadoLibre Grows with Go

Go provides clean, efficient code that readily scales as MercadoLibre’s online commerce grows, and increases developer productivity by allowing their engineers to serve their ever-increasing audience while writing less code.

How Microsoft Embraces Go

Learn about how Microsoft has helped support Go and how it uses Go to power pieces of its cloud infrastructure.

Monzo – Building a Bank with Golang, Microservices and Containers

“Go is a perfect language for creating microservice architectures, and the concurrency features, and the language in general, has allowed the easy creation of small and simple networked services at Monzo that are focused around the ‘single responsibility principle’.”

Netflix - Application data caching using SSDs

The decision to use Go was deliberate, because we needed something that had lower latency than Java (where garbage collection pauses are an issue) and is more productive for developers than C, while also handling tens of thousands of client connections. Go fits this space well.

Go’s value in producing clean, efficient code that readily scales as software deployment scales made the language a strong fit to support PayPal’s goals.

Riot Games - Leveraging Golang for Game Development and Operations

Learn how Riot uses Go to develop, deploy, and operate backend microservices at scale–globally. They share their experience across use cases, with specific examples, and speak to the value of the gopher community.

Salesforce - From Python/C to Go

One of the big advantages is that Go's cross-platform features make porting code easy.

Find out more about Golang at SIXT

“We have been doing Golang at SIXT since 2015. Back then there was not that many people here in our area which were doing Golang in production mode, mostly side projects. So it was really a bold move from our side but it proved to be quite successful. Fast forward to 2019 we have over 15 teams doing Golang. Many of the applications they have built are basically foundation for most of our mobility product offer including Rent, Ride and Share.”

Stream – Why We Switched from Python to Go

Go’s combination of a great ecosystem, easy onboarding for new developers, fast performance, solid support for concurrency and a productive programming environment make it a great choice. It allowed a small development team at Stream to power feeds and chat for over 500 million end users.

Trivago – Why We Chose Go

“Go’s simplicity and its sophisticated tooling let us scale not only our service but more importantly, the process of software engineering itself. Reducing the friction of onboarding and training someone has a significant impact on the company’s productivity, even more so in a constantly moving environment like trivago.”

Twitch - Go’s march to low latency GC

We use Go at Twitch for many of our busiest systems. Its simplicity, safety, performance, and readability make it a good tool for the problems we encounter with serving live video and chat to our millions of users.

Twitter - 5 billion sessions a day in realtime

We now see about five billion sessions per day, and growing. Hundreds of millions of devices send millions of events every second to the Answers endpoint. During the time that it took you to read to here, the Answers back-end will have received and processed about 10,000,000 analytics events.

Uber - GPU-power analytics engine in Go

AresDB [,written in Go,] is widely used at Uber to power our real-time data analytics dashboards, enabling us to make data-driven decisions at scale about myriad aspects of our business.

How Wildlife Studios builds backend systems in Go

Wildlife is a Brazilian native global company focused on mobile gaming. We aim to develop games that will make billions of people happy. We have almost 40 million daily active users, and we rely on Go as the main language for our core platform, given its features to scale our backend services.

Laggards go beyond catching up to become niche champions: a longitudinal case study in China

• Published: 11 April 2024

Cite this article

• Xinmin Peng 1 ,
• Abby Jingzi Zhou   ORCID: orcid.org/0000-0002-1052-5842 2 ,
• Xiaomeng Liu 2 &
• Dianguang Liu 1  

Using a longitudinal case study on Cixing, which is a leading Chinese player in the flat knitting machine industry, this paper explores the process in which laggard firms catch up and exceed catching up to become niche champions in China. We propose a theoretical framework that illustrates the significance of contexts and response strategies for niche champions at different stages, focusing on the market and technology perspectives. In particular, the context is formed by the market ladder and technology modularization, requiring laggard firms to adopt appropriate market development and technology learning strategies in order to respond to the environment and achieve growth. During the catch-up stage, these companies should employ a market leveraging strategy and a technology deconstruction strategy to match the incumbents in the context of a pyramidal market ladder with low technology modularization. In the beyond-catch-up stage, as incumbents, they should adopt a market repositioning strategy and a technology reconstruction strategy to evolve into niche champions in the context of an upgraded market ladder with high technology modularization. Our research contributes to the literature on catch-up and niche champions by elucidating the process, contexts, and strategies of laggards in catching up and becoming niche champions in the global market. Practical insights are also offered to firms and policy makers in emerging economies.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price includes VAT (Russian Federation)

Instant access to the full article PDF.

Rent this article via DeepDyve

Institutional subscriptions

Data availability

The data used in this study are available upon request. Please contact the first author for access, subject to appropriate ethical and legal considerations.

The whole-garment technology represents a revolutionary approach of producing knitted wear as it can generate a complete garment in one piece without cutting or sewing. This technology involves a complex technical system that includes various scientific principles, engineering applications, and product development, requiring long-term accumulation.

https://www.ci-xing.com/news/300.html .

Abramovitz, M. (1986). Catching up, forging ahead, and falling behind. The Journal of Economic History, 46 (2), 385–406.

Google Scholar  

Audretsch, D. B., & Lehmann, E. E. (2018). Internationalization strategies of hidden champions: Lessons from Germany. Multinational Business Review, 26 (1), 2–24.

Awate, S., Larsen, M. M., & Mudambi, R. (2012). EMNE catch-up strategies in the wind turbine industry: Is there a trade-off between output and innovation capabilities? EMNE Catch-Up strategies in the wind turbine industry. Global Strategy Journal, 2 (3), 205–223.

Awate, S., Larsen, M. M., & Mudambi, R. (2015). Accessing vs sourcing knowledge: A comparative study of R&D internationalization between emerging and advanced economy firms. Journal of International Business Studies, 46 (1), 63–86.

Baldwin, C. Y., & Clark, K. B. (2000). Design rules, volume 1: The Power of Modularity . MIT Press.

Binz, C., Gosens, J., Hansen, T., & Hansen, U. E. (2017). Toward Technology-sensitive catching-up policies: Insights from renewable energy in China. World Development, 96 , 418–437.

Brandt, L., & Thun, E. (2016). Constructing a ladder for growth: Policy, markets, and industrial upgrading in China. World Development, 80 (1), 78–95.

Bryman, A. (2016). Social research methods. Oxford university press.

Buckley, P. J., & Hashai, N. (2014). The role of technological catch up and domestic market growth in the genesis of emerging country based multinationals. Research Policy, 43 (2), 423–437.

Campagnolo, D., & Camuffo, A. (2010). The concept of modularity in management studies: A literature review. International Journal of Management Reviews, 12 (3), 259–283.

Cha, H., Wu, J., & Kotabe, M. (2021). The vulnerability problem of Business ecosystems under Global Decoupling. Management and Organization Review, 17 (3), 617–623.

China Textile Machinery Association (2023). Computerized flat knitting machine ushered in new opportunities for development (电脑针织横机迎来发展新机遇) Retrieved October 7, 2023, from https://www.ctma.net/contents/391/801.html

Chinese National Textile and Apparel Industrial Economics Research Institute (2018). China textile and garment industry operation report in the year 2017 (2017年中国纺织服装行业运行报告). Retrieved October 7, 2023, from http://lwzb.stats.gov.cn/pub/lwzb/gzdt/201804/t20180428_4871.html

Choi, S., Lee, J., & Park, H. W. (2020). A comparative study of sustainable transition from catch-up to post catch-up of South Korea and China. Sustainability, 12 (11), 4751.

Chung, M. Y., & Lee, K. (2015). How absorptive capacity is formed in a latecomer economy: different roles of foreign patent and know-how licensing in Korea. World Development, 66 , 678–694.

Cixing. (2023). Annual report . Retrieved October 9, 2023, from https://www.ci-xing.com/tzzgx.html

Cuervo-Cazurra, A. (2012). Extending theory by analyzing developing country multinational companies: Solving the Goldilocks debate. Global Strategy Journal, 2 (3), 153–167.

Cuervo-Cazurra, A., & Genc, M. (2008). Transforming disadvantages into advantages: Developing-country MNEs in the least developed countries. Journal of International Business Studies, 39 (6), 957–979.

Deng, Z., Ma, X., & Zhu, Z. (2022). Transactional dependence and technological upgrading in global value chains. Journal of Management Studies, 59 (2), 390–416.

Edmondson, A. C., & McManus, S. E. (2007). Methodological fit in management field research. Academy of Management Review, 32 (4), 1246–1264.

Eisenhardt, K. M. (1989). Building theories from case study research. The Academy of Management Review, 14 (4), 532–550.

Fixson, S. K., & Park, J. K. (2007). The power of integrality: linkages between product architecture, innovation, and industry structure. Research Policy, 37 (8), 1296–1316.

Frigant, V., & Talbot, D. (2005). Technological determinism and modularity: lessons from a comparison between aircraft and auto industries in Europe. Industry & Innovation, 12 (3), 337–355.

Gao, X. (2014). A latecomer’s strategy to promote a technology standard: the case of Datang and TD-SCDMA. Research Policy, 43 (3), 597–607.

Gao, R., & Sammartino, A. (2022). How does inward foreign direct investment shape emerging market firm invention patenting tendency? Evidence from China. Asia Pacific Journal of Management . https://doi.org/10.1007/s10490-022-09854-5 . online.

Article   Google Scholar  

Gereffi, G., Humphrey, J., & Sturgeon, T. (2005). The governance of global value chains. Review of International Political Economy, 12 , 78–104.

Giachetti, C., & Marchi, G. (2017). Successive changes in leadership in the worldwide mobile phone industry: The role of windows of opportunity and firms’ competitive action. Research Policy, 46 (2), 352–364.

Gioia, D. A., Corley, K. G., & Hamilton, A. L. (2013). Seeking qualitative rigor in inductive research: Notes on the Gioia methodology. Organizational Research Methods, 16 (1), 15–31.

Glaser, B. G. (1965). The constant comparative method of qualitative analysis. Social Problems, 12 (4), 436–445.

Guennif, S., & Ramani, S. V. (2012). Explaining divergence in catching-up in pharma between India and Brazil using the NSI framework. Research Policy, 41 (2), 430–441.

Hakala, H. (2011). Strategic orientations in management literature: three approaches to understanding the interaction between market, technology, entrepreneurial and learning orientations: orientations in management literature. International Journal of Management Reviews, 13 (2), 199–217.

Hwang, H. R., & Choung, J. Y. (2014). The co-evolution of technology and institutions in the catch-up process: The case of the semiconductor industry in Korea and Taiwan. The Journal of Development Studies, 50 (9), 1240–1260.

Kang, H., & Song, J. (2016). Innovation and recurring shifts in industrial leadership: Three phases of change and persistence in the camera industry. Research Policy, 46 (2), 376–387.

Kiamehr, M., Hobday, M., & Hamedi, M. (2015). Latecomer firm strategies in complex product systems (CoPS): The case of Iran’s thermal electricity generation systems. Research Policy, 44 (6), 1240–1251.

Kotabe, M., Parente, R., & Murray, J. Y. (2007). Antecedents and outcomes of modular production in the Brazilian automobile industry: A grounded theory approach. Journal of International Business Studies, 38 (1), 84–106.

Langley, A. N. N., Smallman, C., Tsoukas, H., & Van de Ven, A. H. (2013). Process studies of change in organization and management: Unveiling temporality, activity, and flow. Academy of Management Journal, 56 (1), 1–13.

Lee, K., & Ki, J. H. (2017). Rise of latecomers and catch-up cycles in the world steel industry. Research Policy, 46 (2), 365–375.

Lee, K., & Lim, C. (2001). Technological regimes, catching-up and leapfrogging: Findings from the Korean industries. Research Policy, 30 (3), 459–483.

Lee, K., & Malerba, F. (2017). Catch-up cycles and changes in industrial leadership: Windows of opportunity and responses of firms and countries in the evolution of sectoral systems. Research Policy, 46 (2), 338–351.

Li, D., & Valentini, G. (2023). When are acquisitions a viable catch-up strategy? Some empirical evidence from China. Long Range Planning, 56 (1), 102265.

Li, D., Capone, G., & Malerba, F. (2019). The long march to catch-up: A history-friendly model of China’s mobile communications industry. Research Policy, 48 (3), 649–664.

Li, P. P., Prashantham, S., Zhou, A. J., & Zhou, S. S. (2022). Compositional springboarding and EMNE evolution. Journal of International Business Studies, 53 (4), 754–766.

Lopez-Vega, H., & Lakemond, N. (2021). Tapping into emerging markets: EMNEs’ strategies for innovation capability building. Global Strategy Journal, 12 (2), 394–417.

Luo, Y., & Tung, R. L. (2018). A general theory of springboard MNEs. Journal of International Business Studies, 49 (2), 129–152.

Magnusson, M., & Pasche, M. (2013). A contingency-based approach to the use of product platforms and modules in new product development. Journal of Product Innovation Management, 31 (3), 434–450.

Mahmood, I. P., & Singh, J. (2003). Technological dynamism in Asia. Research Policy, 32 (6), 1031–1054.

Mazzoleni, R., & Nelson, R. R. (2007). Public research institutions and economic catch-up. Research Policy, 36 (10), 1512–1528.

Miao, Y., Song, J., Lee, K., & Jin, C. (2018). Technological catch-up by east Asian firms: Trends, issues, and future research agenda. Asia Pacific Journal of Management, 35 (3), 639–669.

MIIT of China (Ministry of Industry and Information Technology of the People’s Republic of China) (2023). Notice of the General Office of the Ministry of Industry and Information Technology on Carrying out the Selection, Identification, Review and Evaluation of Niche Champion Enterprises in the Manufacturing Industry in 2023 ( 工业和信息化部办公厅关于开展2023年制造业单项冠军企业遴选认定和复核评价工作的通知 ). Retrieved October 7, 2023, from https://wap.miit.gov.cn/jgsj/zfs/qypy/art/2023/art_735d091e943449a4a34453b4426c939a.html

Park, K. H., & Lee, K. (2006). Linking the technological regime to the technological catch-up: Analyzing Korea and Taiwan using the US patent data. Industrial and Corporate Change, 15 (4), 715–753.

Parmigiani, A., Irwin, J., & Lahneman, B. (2022). Building greener motorhomes: How dual-purpose technical and relational capabilities affect component and full product innovation. Strategic Management Journal, 43 (6), 1110–1140.

Prencipe, A., Davies, A., & Hobday, M. (Eds.). (2003). The business of systems integration . Oxford University Press.

Prud’homme, D. (2016). Dynamics of China’s provincial-level specialization in strategic emerging industries. Research Policy, 45 (8), 1586–1603.

Qin, L., and Sun, S. L. (2022). Knowledge collaboration in global value chains: A comparison of supplier selection between a forerunner and a latecomer. Asia Pacific Journal of Management . https://doi.org/10.1007/s10490-022-09823-y . (online only)

Sanchez, R., & Mahoney, J. T. (2015). Modularity, flexibility, and knowledge management in product and organization design. Strategic Management Journal, 17 (S2), 63–76.

Scalera, V. G., Mukherjee, D., & Piscitello, L. (2020). Ownership strategies in knowledge-intensive cross-border acquisitions: Comparing Chinese and Indian MNEs. Asia Pacific Journal of Management, 37 (1), 155–185.

Schenkenhofer, J. (2022). Hidden champions: A review of the literature & future research avenues. Management Review Quarterly, 72 (2), 417–482.

Shepherd, D. A., Mcmullen, J. S., & Ocasio, W. (2017). Is that an opportunity? An attention model of top managers’ opportunity beliefs for strategic action. Strategic Management Journal, 38 (3), 5083–5094.

Simon, H. (1992). Lessons from Germany Midsize Giants. Harvard Business Review, 70 (2), 115–123.

Simon, H. (2009). Hidden champions of the twenty-first century: Success strategies of unknown world market leaders . Springer.

Song, M., Droge, C., Hanvanich, S., & Calantone, R. (2005). Marketing and technology resource complementarity: An analysis of their interaction effect in two environmental contexts. Strategic Management Journal, 26 (3), 259–276.

Sosa, M. E., Eppinger, S. D., & Rowles, C. M. (2004). The misalignment of product architecture and organizational structure in complex product development. Management Science, 50 (12), 1674–1689.

Swanborn, P. (2010). Case study research: What, why and how ? Sage Publications.

Venkateswaran, R. T. (2023). Is there an illusion of symmetry in cultural distance from Asia–pacific emnes? The role of business groups in navigating cultural distance through ambidextrous learning. Asia Pacific Journal of Management, 40 (3), 1169–1215.

Wei, J., Wang, D., & Liu, Y. (2018). Towards an asymmetry-based view of Chinese firms’ technological catch-up. Frontiers of Business Research in China, 12 (4), 12–20.

Witt, M. A., Lewin, A. Y., Li, P. P., & Gaur, A. (2023). Decoupling in international business: Evidence, drivers, impact, and implications for IB research. Journal of World Business, 58 (1), 101399.

Yang, M., & Ai, Q. (2023). Completion of high-tech MandAs by chinese firms: Knowledge distance, industry attractiveness and government involvement. Asia Pacific Journal of Management . (online) https://doi.org/10.1007/s10490-023-09923-3

Yin, R. K. (2009). Case study research: Design and methods (4th ed.). Sage.

Yu, X., Dosi, G., Grazzi, M., & Lei, J. (2017). Inside the virtuous circle between productivity, profitability, investment and corporate growth: An anatomy of Chinese industrialization. Research Policy, 46 (5), 1020–1038.

Download references

This study was financially supported by the National Natural Science Foundation of China (NSFC 72202111; 72172068; 71772097) and the Ministry of Education in China (22YJC630084).

Author information

Authors and affiliations.

Ningbo University, 818 Fenghua Road, Ningbo, Zhejiang, China

Xinmin Peng & Dianguang Liu

University of Nottingham Ningbo China, 199 Taikang East Road, Ningbo, Zhejiang, China

Abby Jingzi Zhou & Xiaomeng Liu

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to Dianguang Liu .

Ethics declarations

Competing interests, additional information, publisher’s note.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Peng, X., Zhou, A.J., Liu, X. et al. Laggards go beyond catching up to become niche champions: a longitudinal case study in China. Asia Pac J Manag (2024). https://doi.org/10.1007/s10490-024-09961-5

Download citation

Accepted : 12 March 2024

Published : 11 April 2024

DOI : https://doi.org/10.1007/s10490-024-09961-5

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Niche champions
• Response strategies
• Find a journal
• Publish with us
• Track your research

Help | Advanced Search

Computer Science > Computation and Language

Title: relation extraction using large language models: a case study on acupuncture point locations.

Abstract: In acupuncture therapy, the accurate location of acupoints is essential for its effectiveness. The advanced language understanding capabilities of large language models (LLMs) like Generative Pre-trained Transformers (GPT) present a significant opportunity for extracting relations related to acupoint locations from textual knowledge sources. This study aims to compare the performance of GPT with traditional deep learning models (Long Short-Term Memory (LSTM) and Bidirectional Encoder Representations from Transformers for Biomedical Text Mining (BioBERT)) in extracting acupoint-related location relations and assess the impact of pretraining and fine-tuning on GPT's performance. We utilized the World Health Organization Standard Acupuncture Point Locations in the Western Pacific Region (WHO Standard) as our corpus, which consists of descriptions of 361 acupoints. Five types of relations ('direction_of,' 'distance_of,' 'part_of,' 'near_acupoint,' and 'located_near') (n= 3,174) between acupoints were annotated. Five models were compared: BioBERT, LSTM, pre-trained GPT-3.5, and fine-tuned GPT-3.5, as well as pre-trained GPT-4. Performance metrics included micro-average exact match precision, recall, and F1 scores. Our results demonstrate that fine-tuned GPT-3.5 consistently outperformed other models in F1 scores across all relation types. Overall, it achieved the highest micro-average F1 score of 0.92. This study underscores the effectiveness of LLMs like GPT in extracting relations related to acupoint locations, with implications for accurately modeling acupuncture knowledge and promoting standard implementation in acupuncture training and practice. The findings also contribute to advancing informatics applications in traditional and complementary medicine, showcasing the potential of LLMs in natural language processing.

Submission history

Access paper:.

• Other Formats

References & Citations

• Google Scholar
• Semantic Scholar

BibTeX formatted citation

Bibliographic and Citation Tools

Code, data and media associated with this article, recommenders and search tools.

• Institution

arXivLabs: experimental projects with community collaborators

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs .

Ozempic, Wegovy Won't Boost Thyroid Cancer Risk: Study

Ozempic, Wegovy Won't Boost Thyroid Cancer Risk: Study

By Ernie Mundell HealthDay Reporter

WEDNESDAY, April 10, 2024 (HealthDay News) -- Wegovy, Ozempic and other drugs known as GLP-1 analogues have become wildly popular for controlling diabetes and helping folks lose weight.

There were concerns that longer term use of the drugs might raise users' odds for thyroid cancer, but a Swedish study of more than 435,000 people finds no evidence to support that notion.

“Many people take these medicines, so it is important to study potential risks associated with them,” said study lead author Björn Pasternak . He's principal researcher at the department of medicine at the Karolinska Institute in Stockholm.

“Our study covers a broad group of patients and provides strong support that GLP-1 analogues are not associated with an increased risk of thyroid cancer," he said in an institute news release .

U.S. Cities With the Most Homelessness

The findings were published April 9 in the BMJ .

In the analysis, Pasternak's team used data from a major Scandinavian database involving 145,000 people who were taking GLP-1 analogues such as liraglutide (Victoza) or semaglutide ( Ozempic ), and 290,000 people who were taking one of another class of diabetes drugs called DPP4 inhibitors.

The study found no higher odds for thyroid cancer among folks taking GLP-1 analogues compared to those on DPP4 inhibitors.

That finding was repeated when GLP-1 analogue users were compared to patients taking a third class of diabetes meds, called SGLT2 inhibitors.

Study co-author Peter Ueda , an assistant professor of medicine at the Karolinska Institute, stressed that the final verdict on GLP-1 analogues' effect on the thyroid is still to come.

“We cannot rule out that the risk of certain subtypes of thyroid cancer is increased in smaller patient groups that we could not study here, for example in people with a high congenital risk of medullary thyroid cancer who are advised against using these drugs,” Ueda said.

More information

Find out more about thyroid cancer at the American Cancer Society .

SOURCE: Karolinska Institute, news release, April 9, 2024

Copyright © 2024 HealthDay . All rights reserved.

Join the Conversation

America 2024

Health News Bulletin

Stay informed on the latest news on health and COVID-19 from the editors at U.S. News & World Report.

Sign in to manage your newsletters »

Sign up to receive the latest updates from U.S News & World Report and our trusted partners and sponsors. By clicking submit, you are agreeing to our Terms and Conditions & Privacy Policy .

You May Also Like

The 10 worst presidents.

U.S. News Staff Feb. 23, 2024

Cartoons on President Donald Trump

Feb. 1, 2017, at 1:24 p.m.

Photos: Obama Behind the Scenes

April 8, 2022

Photos: Who Supports Joe Biden?

March 11, 2020

A Reprieve for Inflation?

Tim Smart April 11, 2024

Embattled Johnson Bruised Again

Aneeta Mathur-Ashton April 10, 2024

What to Know About Biden's State Dinner

Laura Mannweiler April 10, 2024

Fed: Inflation Path ‘Somewhat Uneven’

Tim Smart April 10, 2024

No Letup From Inflation in March

Arizona Court Upholds 1864 Abortion Ban

Lauren Camera April 9, 2024