research project which is

Frequently asked questions

What is a research project.

A research project is an academic, scientific, or professional undertaking to answer a research question . Research projects can take many forms, such as qualitative or quantitative , descriptive , longitudinal , experimental , or correlational . What kind of research approach you choose will depend on your topic.

Frequently asked questions: Writing a research paper

The best way to remember the difference between a research plan and a research proposal is that they have fundamentally different audiences. A research plan helps you, the researcher, organize your thoughts. On the other hand, a dissertation proposal or research proposal aims to convince others (e.g., a supervisor, a funding body, or a dissertation committee) that your research topic is relevant and worthy of being conducted.

Formulating a main research question can be a difficult task. Overall, your question should contribute to solving the problem that you have defined in your problem statement .

However, it should also fulfill criteria in three main areas:

• Researchability
• Feasibility and specificity
• Relevance and originality

Research questions anchor your whole project, so it’s important to spend some time refining them.

In general, they should be:

• Focused and researchable
• Answerable using credible sources
• Complex and arguable
• Feasible and specific
• Relevant and original

All research questions should be:

• Focused on a single problem or issue
• Researchable using primary and/or secondary sources
• Feasible to answer within the timeframe and practical constraints
• Specific enough to answer thoroughly
• Complex enough to develop the answer over the space of a paper or thesis
• Relevant to your field of study and/or society more broadly

A research aim is a broad statement indicating the general purpose of your research project. It should appear in your introduction at the end of your problem statement , before your research objectives.

Research objectives are more specific than your research aim. They indicate the specific ways you’ll address the overarching aim.

Once you’ve decided on your research objectives , you need to explain them in your paper, at the end of your problem statement .

Keep your research objectives clear and concise, and use appropriate verbs to accurately convey the work that you will carry out for each one.

I will compare …

Your research objectives indicate how you’ll try to address your research problem and should be specific:

Research objectives describe what you intend your research project to accomplish.

They summarize the approach and purpose of the project and help to focus your research.

Your objectives should appear in the introduction of your research paper , at the end of your problem statement .

The main guidelines for formatting a paper in Chicago style are to:

• Use a standard font like 12 pt Times New Roman
• Use 1 inch margins or larger
• Apply double line spacing
• Indent every new paragraph ½ inch
• Include a title page
• Place page numbers in the top right or bottom center
• Cite your sources with author-date citations or Chicago footnotes
• Include a bibliography or reference list

To automatically generate accurate Chicago references, you can use Scribbr’s free Chicago reference generator .

The main guidelines for formatting a paper in MLA style are as follows:

• Use an easily readable font like 12 pt Times New Roman
• Set 1 inch page margins
• Include a four-line MLA heading on the first page
• Center the paper’s title
• Use title case capitalization for headings
• Cite your sources with MLA in-text citations
• List all sources cited on a Works Cited page at the end

To format a paper in APA Style , follow these guidelines:

• Use a standard font like 12 pt Times New Roman or 11 pt Arial
• If submitting for publication, insert a running head on every page
• Apply APA heading styles
• Cite your sources with APA in-text citations
• List all sources cited on a reference page at the end

No, it’s not appropriate to present new arguments or evidence in the conclusion . While you might be tempted to save a striking argument for last, research papers follow a more formal structure than this.

All your findings and arguments should be presented in the body of the text (more specifically in the results and discussion sections if you are following a scientific structure). The conclusion is meant to summarize and reflect on the evidence and arguments you have already presented, not introduce new ones.

The conclusion of a research paper has several key elements you should make sure to include:

• A restatement of the research problem
• A summary of your key arguments and/or findings
• A short discussion of the implications of your research

Don’t feel that you have to write the introduction first. The introduction is often one of the last parts of the research paper you’ll write, along with the conclusion.

This is because it can be easier to introduce your paper once you’ve already written the body ; you may not have the clearest idea of your arguments until you’ve written them, and things can change during the writing process .

The way you present your research problem in your introduction varies depending on the nature of your research paper . A research paper that presents a sustained argument will usually encapsulate this argument in a thesis statement .

A research paper designed to present the results of empirical research tends to present a research question that it seeks to answer. It may also include a hypothesis —a prediction that will be confirmed or disproved by your research.

The introduction of a research paper includes several key elements:

• A hook to catch the reader’s interest
• Relevant background on the topic
• Details of your research problem

and your problem statement

• A thesis statement or research question
• Sometimes an overview of the paper

Ask our team

Want to contact us directly? No problem.  We  are always here for you.

• Email [email protected]
• Start live chat
• Call +1 (510) 822-8066
• WhatsApp +31 20 261 6040

Our team helps students graduate by offering:

• A world-class citation generator
• Plagiarism Checker software powered by Turnitin
• Innovative Citation Checker software
• Professional proofreading services
• Over 300 helpful articles about academic writing, citing sources, plagiarism, and more

Scribbr specializes in editing study-related documents . We proofread:

• PhD dissertations
• Research proposals
• Personal statements
• Admission essays
• Motivation letters
• Reflection papers
• Journal articles
• Capstone projects

Scribbr’s Plagiarism Checker is powered by elements of Turnitin’s Similarity Checker , namely the plagiarism detection software and the Internet Archive and Premium Scholarly Publications content databases .

The add-on AI detector is powered by Scribbr’s proprietary software.

The Scribbr Citation Generator is developed using the open-source Citation Style Language (CSL) project and Frank Bennett’s citeproc-js . It’s the same technology used by dozens of other popular citation tools, including Mendeley and Zotero.

You can find all the citation styles and locales used in the Scribbr Citation Generator in our publicly accessible repository on Github .

Illustration by James Round

How to plan a research project

Whether for a paper or a thesis, define your question, review the work of others – and leave yourself open to discovery.

by Brooke Harrington   + BIO

is professor of sociology at Dartmouth College in New Hampshire. Her research has won international awards both for scholarly quality and impact on public life. She has published dozens of articles and three books, most recently the bestseller Capital without Borders (2016), now translated into five languages.

Edited by Sam Haselby

Need to know

‘When curiosity turns to serious matters, it’s called research.’ – From Aphorisms (1880-1905) by Marie von Ebner-Eschenbach

Planning research projects is a time-honoured intellectual exercise: one that requires both creativity and sharp analytical skills. The purpose of this Guide is to make the process systematic and easy to understand. While there is a great deal of freedom and discovery involved – from the topics you choose, to the data and methods you apply – there are also some norms and constraints that obtain, no matter what your academic level or field of study. For those in high school through to doctoral students, and from art history to archaeology, research planning involves broadly similar steps, including: formulating a question, developing an argument or predictions based on previous research, then selecting the information needed to answer your question.

Some of this might sound self-evident but, as you’ll find, research requires a different way of approaching and using information than most of us are accustomed to in everyday life. That is why I include orienting yourself to knowledge-creation as an initial step in the process. This is a crucial and underappreciated phase in education, akin to making the transition from salaried employment to entrepreneurship: suddenly, you’re on your own, and that requires a new way of thinking about your work.

What follows is a distillation of what I’ve learned about this process over 27 years as a professional social scientist. It reflects the skills that my own professors imparted in the sociology doctoral programme at Harvard, as well as what I learned later on as a research supervisor for Ivy League PhD and MA students, and then as the author of award-winning scholarly books and articles. It can be adapted to the demands of both short projects (such as course term papers) and long ones, such as a thesis.

At its simplest, research planning involves the four distinct steps outlined below: orienting yourself to knowledge-creation; defining your research question; reviewing previous research on your question; and then choosing relevant data to formulate your own answers. Because the focus of this Guide is on planning a research project, as opposed to conducting a research project, this section won’t delve into the details of data-collection or analysis; those steps happen after you plan the project. In addition, the topic is vast: year-long doctoral courses are devoted to data and analysis. Instead, the fourth part of this section will outline some basic strategies you could use in planning a data-selection and analysis process appropriate to your research question.

Step 1: Orient yourself

Planning and conducting research requires you to make a transition, from thinking like a consumer of information to thinking like a producer of information. That sounds simple, but it’s actually a complex task. As a practical matter, this means putting aside the mindset of a student, which treats knowledge as something created by other people. As students, we are often passive receivers of knowledge: asked to do a specified set of readings, then graded on how well we reproduce what we’ve read.

Researchers, however, must take on an active role as knowledge producers . Doing research requires more of you than reading and absorbing what other people have written: you have to engage in a dialogue with it. That includes arguing with previous knowledge and perhaps trying to show that ideas we have accepted as given are actually wrong or incomplete. For example, rather than simply taking in the claims of an author you read, you’ll need to draw out the implications of those claims: if what the author is saying is true, what else does that suggest must be true? What predictions could you make based on the author’s claims?

In other words, rather than treating a reading as a source of truth – even if it comes from a revered source, such as Plato or Marie Curie – this orientation step asks you to treat the claims you read as provisional and subject to interrogation. That is one of the great pieces of wisdom that science and philosophy can teach us: that the biggest advances in human understanding have been made not by being correct about trivial things, but by being wrong in an interesting way . For example, Albert Einstein was wrong about quantum mechanics, but his arguments about it with his fellow physicist Niels Bohr have led to some of the biggest breakthroughs in science, even a century later.

Step 2: Define your research question

Students often give this step cursory attention, but experienced researchers know that formulating a good question is sometimes the most difficult part of the research planning process. That is because the precise language of the question frames the rest of the project. It’s therefore important to pose the question carefully, in a way that’s both possible to answer and likely to yield interesting results. Of course, you must choose a question that interests you, but that’s only the beginning of what’s likely to be an iterative process: most researchers come back to this step repeatedly, modifying their questions in light of previous research, resource limitations and other considerations.

Researchers face limits in terms of time and money. They, like everyone else, have to pose research questions that they can plausibly answer given the constraints they face. For example, it would be inadvisable to frame a project around the question ‘What are the roots of the Arab-Israeli conflict?’ if you have only a week to develop an answer and no background on that topic. That’s not to limit your imagination: you can come up with any question you’d like. But it typically does require some creativity to frame a question that you can answer well – that is, by investigating thoroughly and providing new insights – within the limits you face.

In addition to being interesting to you, and feasible within your resource constraints, the third and most important characteristic of a ‘good’ research topic is whether it allows you to create new knowledge. It might turn out that your question has already been asked and answered to your satisfaction: if so, you’ll find out in the next step of this process. On the other hand, you might come up with a research question that hasn’t been addressed previously. Before you get too excited about breaking uncharted ground, consider this: a lot of potentially researchable questions haven’t been studied for good reason ; they might have answers that are trivial or of very limited interest. This could include questions such as ‘Why does the area of a circle equal π r²?’ or ‘Did winter conditions affect Napoleon’s plans to invade Russia?’ Of course, you might be able to make the argument that a seemingly trivial question is actually vitally important, but you must be prepared to back that up with convincing evidence. The exercise in the ‘Learn More’ section below will help you think through some of these issues.

Finally, scholarly research questions must in some way lead to new and distinctive insights. For example, lots of people have studied gender roles in sports teams; what can you ask that hasn’t been asked before? Reinventing the wheel is the number-one no-no in this endeavour. That’s why the next step is so important: reviewing previous research on your topic. Depending on what you find in that step, you might need to revise your research question; iterating between your question and the existing literature is a normal process. But don’t worry: it doesn’t go on forever. In fact, the iterations taper off – and your research question stabilises – as you develop a firm grasp of the current state of knowledge on your topic.

Step 3: Review previous research

In academic research, from articles to books, it’s common to find a section called a ‘literature review’. The purpose of that section is to describe the state of the art in knowledge on the research question that a project has posed. It demonstrates that researchers have thoroughly and systematically reviewed the relevant findings of previous studies on their topic, and that they have something novel to contribute.

Your own research project should include something like this, even if it’s a high-school term paper. In the research planning process, you’ll want to list at least half a dozen bullet points stating the major findings on your topic by other people. In relation to those findings, you should be able to specify where your project could provide new and necessary insights. There are two basic rhetorical positions one can take in framing the novelty-plus-importance argument required of academic research:

• Position 1 requires you to build on or extend a set of existing ideas; that means saying something like: ‘Person A has argued that X is true about gender; this implies Y, which has not yet been tested. My project will test Y, and if I find evidence to support it, that will change the way we understand gender.’
• Position 2 is to argue that there is a gap in existing knowledge, either because previous research has reached conflicting conclusions or has failed to consider something important. For example, one could say that research on middle schoolers and gender has been limited by being conducted primarily in coeducational environments, and that findings might differ dramatically if research were conducted in more schools where the student body was all-male or all-female.

Your overall goal in this step of the process is to show that your research will be part of a larger conversation: that is, how your project flows from what’s already known, and how it advances, extends or challenges that existing body of knowledge. That will be the contribution of your project, and it constitutes the motivation for your research.

Two things are worth mentioning about your search for sources of relevant previous research. First, you needn’t look only at studies on your precise topic. For example, if you want to study gender-identity formation in schools, you shouldn’t restrict yourself to studies of schools; the empirical setting (schools) is secondary to the larger social process that interests you (how people form gender identity). That process occurs in many different settings, so cast a wide net. Second, be sure to use legitimate sources – meaning publications that have been through some sort of vetting process, whether that involves peer review (as with academic journal articles you might find via Google Scholar) or editorial review (as you’d find in well-known mass media publications, such as The Economist or The Washington Post ). What you’ll want to avoid is using unvetted sources such as personal blogs or Wikipedia. Why? Because anybody can write anything in those forums, and there is no way to know – unless you’re already an expert – if the claims you find there are accurate. Often, they’re not.

Step 4: Choose your data and methods

Whatever your research question is, eventually you’ll need to consider which data source and analytical strategy are most likely to provide the answers you’re seeking. One starting point is to consider whether your question would be best addressed by qualitative data (such as interviews, observations or historical records), quantitative data (such as surveys or census records) or some combination of both. Your ideas about data sources will, in turn, suggest options for analytical methods.

You might need to collect your own data, or you might find everything you need readily available in an existing dataset someone else has created. A great place to start is with a research librarian: university libraries always have them and, at public universities, those librarians can work with the public, including people who aren’t affiliated with the university. If you don’t happen to have a public university and its library close at hand, an ordinary public library can still be a good place to start: the librarians are often well versed in accessing data sources that might be relevant to your study, such as the census, or historical archives, or the Survey of Consumer Finances.

Because your task at this point is to plan research, rather than conduct it, the purpose of this step is not to commit you irrevocably to a course of action. Instead, your goal here is to think through a feasible approach to answering your research question. You’ll need to find out, for example, whether the data you want exist; if not, do you have a realistic chance of gathering the data yourself, or would it be better to modify your research question? In terms of analysis, would your strategy require you to apply statistical methods? If so, do you have those skills? If not, do you have time to learn them, or money to hire a research assistant to run the analysis for you?

Please be aware that qualitative methods in particular are not the casual undertaking they might appear to be. Many people make the mistake of thinking that only quantitative data and methods are scientific and systematic, while qualitative methods are just a fancy way of saying: ‘I talked to some people, read some old newspapers, and drew my own conclusions.’ Nothing could be further from the truth. In the final section of this guide, you’ll find some links to resources that will provide more insight on standards and procedures governing qualitative research, but suffice it to say: there are rules about what constitutes legitimate evidence and valid analytical procedure for qualitative data, just as there are for quantitative data.

Circle back and consider revising your initial plans

As you work through these four steps in planning your project, it’s perfectly normal to circle back and revise. Research planning is rarely a linear process. It’s also common for new and unexpected avenues to suggest themselves. As the sociologist Thorstein Veblen wrote in 1908 : ‘The outcome of any serious research can only be to make two questions grow where only one grew before.’ That’s as true of research planning as it is of a completed project. Try to enjoy the horizons that open up for you in this process, rather than becoming overwhelmed; the four steps, along with the two exercises that follow, will help you focus your plan and make it manageable.

Key points – How to plan a research project

• Planning a research project is essential no matter your academic level or field of study. There is no one ‘best’ way to design research, but there are certain guidelines that can be helpfully applied across disciplines.
• Orient yourself to knowledge-creation. Make the shift from being a consumer of information to being a producer of information.
• Define your research question. Your question frames the rest of your project, sets the scope, and determines the kinds of answers you can find.
• Review previous research on your question. Survey the existing body of relevant knowledge to ensure that your research will be part of a larger conversation.
• Choose your data and methods. For instance, will you be collecting qualitative data, via interviews, or numerical data, via surveys?
• Circle back and consider revising your initial plans. Expect your research question in particular to undergo multiple rounds of refinement as you learn more about your topic.

Good research questions tend to beget more questions. This can be frustrating for those who want to get down to business right away. Try to make room for the unexpected: this is usually how knowledge advances. Many of the most significant discoveries in human history have been made by people who were looking for something else entirely. There are ways to structure your research planning process without over-constraining yourself; the two exercises below are a start, and you can find further methods in the Links and Books section.

The following exercise provides a structured process for advancing your research project planning. After completing it, you’ll be able to do the following:

• describe clearly and concisely the question you’ve chosen to study
• summarise the state of the art in knowledge about the question, and where your project could contribute new insight
• identify the best strategy for gathering and analysing relevant data

In other words, the following provides a systematic means to establish the building blocks of your research project.

Exercise 1: Definition of research question and sources

This exercise prompts you to select and clarify your general interest area, develop a research question, and investigate sources of information. The annotated bibliography will also help you refine your research question so that you can begin the second assignment, a description of the phenomenon you wish to study.

Jot down a few bullet points in response to these two questions, with the understanding that you’ll probably go back and modify your answers as you begin reading other studies relevant to your topic:

• What will be the general topic of your paper?
• What will be the specific topic of your paper?

b) Research question(s)

Use the following guidelines to frame a research question – or questions – that will drive your analysis. As with Part 1 above, you’ll probably find it necessary to change or refine your research question(s) as you complete future assignments.

• Your question should be phrased so that it can’t be answered with a simple ‘yes’ or ‘no’.
• Your question should have more than one plausible answer.
• Your question should draw relationships between two or more concepts; framing the question in terms of How? or What? often works better than asking Why ?

c) Annotated bibliography

Most or all of your background information should come from two sources: scholarly books and journals, or reputable mass media sources. You might be able to access journal articles electronically through your library, using search engines such as JSTOR and Google Scholar. This can save you a great deal of time compared with going to the library in person to search periodicals. General news sources, such as those accessible through LexisNexis, are acceptable, but should be cited sparingly, since they don’t carry the same level of credibility as scholarly sources. As discussed above, unvetted sources such as blogs and Wikipedia should be avoided, because the quality of the information they provide is unreliable and often misleading.

To create an annotated bibliography, provide the following information for at least 10 sources relevant to your specific topic, using the format suggested below.

Name of author(s):

Publication date:

Title of book, chapter, or article:

If a chapter or article, title of journal or book where they appear:

Brief description of this work, including main findings and methods ( c 75 words):

Summary of how this work contributes to your project ( c 75 words):

Brief description of the implications of this work ( c 25 words):

Identify any gap or controversy in knowledge this work points up, and how your project could address those problems ( c 50 words):

Exercise 2: Towards an analysis

Develop a short statement ( c 250 words) about the kind of data that would be useful to address your research question, and how you’d analyse it. Some questions to consider in writing this statement include:

• What are the central concepts or variables in your project? Offer a brief definition of each.
• Do any data sources exist on those concepts or variables, or would you need to collect data?
• Of the analytical strategies you could apply to that data, which would be the most appropriate to answer your question? Which would be the most feasible for you? Consider at least two methods, noting their advantages or disadvantages for your project.

Links & books

One of the best texts ever written about planning and executing research comes from a source that might be unexpected: a 60-year-old work on urban planning by a self-trained scholar. The classic book The Death and Life of Great American Cities (1961) by Jane Jacobs (available complete and free of charge via this link ) is worth reading in its entirety just for the pleasure of it. But the final 20 pages – a concluding chapter titled ‘The Kind of Problem a City Is’ – are really about the process of thinking through and investigating a problem. Highly recommended as a window into the craft of research.

Jacobs’s text references an essay on advancing human knowledge by the mathematician Warren Weaver. At the time, Weaver was director of the Rockefeller Foundation, in charge of funding basic research in the natural and medical sciences. Although the essay is titled ‘A Quarter Century in the Natural Sciences’ (1960) and appears at first blush to be merely a summation of one man’s career, it turns out to be something much bigger and more interesting: a meditation on the history of human beings seeking answers to big questions about the world. Weaver goes back to the 17th century to trace the origins of systematic research thinking, with enthusiasm and vivid anecdotes that make the process come alive. The essay is worth reading in its entirety, and is available free of charge via this link .

For those seeking a more in-depth, professional-level discussion of the logic of research design, the political scientist Harvey Starr provides insight in a compact format in the article ‘Cumulation from Proper Specification: Theory, Logic, Research Design, and “Nice” Laws’ (2005). Starr reviews the ‘research triad’, consisting of the interlinked considerations of formulating a question, selecting relevant theories and applying appropriate methods. The full text of the article, published in the scholarly journal Conflict Management and Peace Science , is available, free of charge, via this link .

Finally, the book Getting What You Came For (1992) by Robert Peters is not only an outstanding guide for anyone contemplating graduate school – from the application process onward – but it also includes several excellent chapters on planning and executing research, applicable across a wide variety of subject areas. It was an invaluable resource for me 25 years ago, and it remains in print with good reason; I recommend it to all my students, particularly Chapter 16 (‘The Thesis Topic: Finding It’), Chapter 17 (‘The Thesis Proposal’) and Chapter 18 (‘The Thesis: Writing It’).

How to use ‘possibility thinking’

Have you hit an impasse in your personal or professional life? Answer these questions to open your mind to what’s possible

by Constance de Saint Laurent & Vlad Glăveanu

The nature of reality

How to think about time

This philosopher’s introduction to the nature of time could radically alter how you see your past and imagine your future

by Graeme A Forbes

Cognitive and behavioural therapies

How to stop living on auto-pilot

Are you going through the motions? Use these therapy techniques to set meaningful goals and build a ‘life worth living’

by Kiki Fehling

Research Design 101

Everything You Need To Get Started (With Examples)

By: Derek Jansen (MBA) | Reviewers: Eunice Rautenbach (DTech) & Kerryn Warren (PhD) | April 2023

Navigating the world of research can be daunting, especially if you’re a first-time researcher. One concept you’re bound to run into fairly early in your research journey is that of “ research design ”. Here, we’ll guide you through the basics using practical examples , so that you can approach your research with confidence.

Overview: Research Design 101

What is research design.

• Research design types for quantitative studies
• Video explainer : quantitative research design
• Research design types for qualitative studies
• Video explainer : qualitative research design
• How to choose a research design
• Key takeaways

Research design refers to the overall plan, structure or strategy that guides a research project , from its conception to the final data analysis. A good research design serves as the blueprint for how you, as the researcher, will collect and analyse data while ensuring consistency, reliability and validity throughout your study.

Understanding different types of research designs is essential as helps ensure that your approach is suitable  given your research aims, objectives and questions , as well as the resources you have available to you. Without a clear big-picture view of how you’ll design your research, you run the risk of potentially making misaligned choices in terms of your methodology – especially your sampling , data collection and data analysis decisions.

The problem with defining research design…

One of the reasons students struggle with a clear definition of research design is because the term is used very loosely across the internet, and even within academia.

Some sources claim that the three research design types are qualitative, quantitative and mixed methods , which isn’t quite accurate (these just refer to the type of data that you’ll collect and analyse). Other sources state that research design refers to the sum of all your design choices, suggesting it’s more like a research methodology . Others run off on other less common tangents. No wonder there’s confusion!

In this article, we’ll clear up the confusion. We’ll explain the most common research design types for both qualitative and quantitative research projects, whether that is for a full dissertation or thesis, or a smaller research paper or article.

Research Design: Quantitative Studies

Quantitative research involves collecting and analysing data in a numerical form. Broadly speaking, there are four types of quantitative research designs: descriptive , correlational , experimental , and quasi-experimental . 

Descriptive Research Design

As the name suggests, descriptive research design focuses on describing existing conditions, behaviours, or characteristics by systematically gathering information without manipulating any variables. In other words, there is no intervention on the researcher’s part – only data collection.

For example, if you’re studying smartphone addiction among adolescents in your community, you could deploy a survey to a sample of teens asking them to rate their agreement with certain statements that relate to smartphone addiction. The collected data would then provide insight regarding how widespread the issue may be – in other words, it would describe the situation.

The key defining attribute of this type of research design is that it purely describes the situation . In other words, descriptive research design does not explore potential relationships between different variables or the causes that may underlie those relationships. Therefore, descriptive research is useful for generating insight into a research problem by describing its characteristics . By doing so, it can provide valuable insights and is often used as a precursor to other research design types.

Correlational Research Design

Correlational design is a popular choice for researchers aiming to identify and measure the relationship between two or more variables without manipulating them . In other words, this type of research design is useful when you want to know whether a change in one thing tends to be accompanied by a change in another thing.

For example, if you wanted to explore the relationship between exercise frequency and overall health, you could use a correlational design to help you achieve this. In this case, you might gather data on participants’ exercise habits, as well as records of their health indicators like blood pressure, heart rate, or body mass index. Thereafter, you’d use a statistical test to assess whether there’s a relationship between the two variables (exercise frequency and health).

As you can see, correlational research design is useful when you want to explore potential relationships between variables that cannot be manipulated or controlled for ethical, practical, or logistical reasons. It is particularly helpful in terms of developing predictions , and given that it doesn’t involve the manipulation of variables, it can be implemented at a large scale more easily than experimental designs (which will look at next).

That said, it’s important to keep in mind that correlational research design has limitations – most notably that it cannot be used to establish causality . In other words, correlation does not equal causation . To establish causality, you’ll need to move into the realm of experimental design, coming up next…

Need a helping hand?

Experimental Research Design

Experimental research design is used to determine if there is a causal relationship between two or more variables . With this type of research design, you, as the researcher, manipulate one variable (the independent variable) while controlling others (dependent variables). Doing so allows you to observe the effect of the former on the latter and draw conclusions about potential causality.

For example, if you wanted to measure if/how different types of fertiliser affect plant growth, you could set up several groups of plants, with each group receiving a different type of fertiliser, as well as one with no fertiliser at all. You could then measure how much each plant group grew (on average) over time and compare the results from the different groups to see which fertiliser was most effective.

Overall, experimental research design provides researchers with a powerful way to identify and measure causal relationships (and the direction of causality) between variables. However, developing a rigorous experimental design can be challenging as it’s not always easy to control all the variables in a study. This often results in smaller sample sizes , which can reduce the statistical power and generalisability of the results.

Moreover, experimental research design requires random assignment . This means that the researcher needs to assign participants to different groups or conditions in a way that each participant has an equal chance of being assigned to any group (note that this is not the same as random sampling ). Doing so helps reduce the potential for bias and confounding variables . This need for random assignment can lead to ethics-related issues . For example, withholding a potentially beneficial medical treatment from a control group may be considered unethical in certain situations.

Quasi-Experimental Research Design

Quasi-experimental research design is used when the research aims involve identifying causal relations , but one cannot (or doesn’t want to) randomly assign participants to different groups (for practical or ethical reasons). Instead, with a quasi-experimental research design, the researcher relies on existing groups or pre-existing conditions to form groups for comparison.

For example, if you were studying the effects of a new teaching method on student achievement in a particular school district, you may be unable to randomly assign students to either group and instead have to choose classes or schools that already use different teaching methods. This way, you still achieve separate groups, without having to assign participants to specific groups yourself.

Naturally, quasi-experimental research designs have limitations when compared to experimental designs. Given that participant assignment is not random, it’s more difficult to confidently establish causality between variables, and, as a researcher, you have less control over other variables that may impact findings.

All that said, quasi-experimental designs can still be valuable in research contexts where random assignment is not possible and can often be undertaken on a much larger scale than experimental research, thus increasing the statistical power of the results. What’s important is that you, as the researcher, understand the limitations of the design and conduct your quasi-experiment as rigorously as possible, paying careful attention to any potential confounding variables .

Research Design: Qualitative Studies

There are many different research design types when it comes to qualitative studies, but here we’ll narrow our focus to explore the “Big 4”. Specifically, we’ll look at phenomenological design, grounded theory design, ethnographic design, and case study design.

Phenomenological Research Design

Phenomenological design involves exploring the meaning of lived experiences and how they are perceived by individuals. This type of research design seeks to understand people’s perspectives , emotions, and behaviours in specific situations. Here, the aim for researchers is to uncover the essence of human experience without making any assumptions or imposing preconceived ideas on their subjects.

For example, you could adopt a phenomenological design to study why cancer survivors have such varied perceptions of their lives after overcoming their disease. This could be achieved by interviewing survivors and then analysing the data using a qualitative analysis method such as thematic analysis to identify commonalities and differences.

Phenomenological research design typically involves in-depth interviews or open-ended questionnaires to collect rich, detailed data about participants’ subjective experiences. This richness is one of the key strengths of phenomenological research design but, naturally, it also has limitations. These include potential biases in data collection and interpretation and the lack of generalisability of findings to broader populations.

Grounded Theory Research Design

Grounded theory (also referred to as “GT”) aims to develop theories by continuously and iteratively analysing and comparing data collected from a relatively large number of participants in a study. It takes an inductive (bottom-up) approach, with a focus on letting the data “speak for itself”, without being influenced by preexisting theories or the researcher’s preconceptions.

As an example, let’s assume your research aims involved understanding how people cope with chronic pain from a specific medical condition, with a view to developing a theory around this. In this case, grounded theory design would allow you to explore this concept thoroughly without preconceptions about what coping mechanisms might exist. You may find that some patients prefer cognitive-behavioural therapy (CBT) while others prefer to rely on herbal remedies. Based on multiple, iterative rounds of analysis, you could then develop a theory in this regard, derived directly from the data (as opposed to other preexisting theories and models).

Grounded theory typically involves collecting data through interviews or observations and then analysing it to identify patterns and themes that emerge from the data. These emerging ideas are then validated by collecting more data until a saturation point is reached (i.e., no new information can be squeezed from the data). From that base, a theory can then be developed .

As you can see, grounded theory is ideally suited to studies where the research aims involve theory generation , especially in under-researched areas. Keep in mind though that this type of research design can be quite time-intensive , given the need for multiple rounds of data collection and analysis.

Ethnographic Research Design

Ethnographic design involves observing and studying a culture-sharing group of people in their natural setting to gain insight into their behaviours, beliefs, and values. The focus here is on observing participants in their natural environment (as opposed to a controlled environment). This typically involves the researcher spending an extended period of time with the participants in their environment, carefully observing and taking field notes .

All of this is not to say that ethnographic research design relies purely on observation. On the contrary, this design typically also involves in-depth interviews to explore participants’ views, beliefs, etc. However, unobtrusive observation is a core component of the ethnographic approach.

As an example, an ethnographer may study how different communities celebrate traditional festivals or how individuals from different generations interact with technology differently. This may involve a lengthy period of observation, combined with in-depth interviews to further explore specific areas of interest that emerge as a result of the observations that the researcher has made.

As you can probably imagine, ethnographic research design has the ability to provide rich, contextually embedded insights into the socio-cultural dynamics of human behaviour within a natural, uncontrived setting. Naturally, however, it does come with its own set of challenges, including researcher bias (since the researcher can become quite immersed in the group), participant confidentiality and, predictably, ethical complexities . All of these need to be carefully managed if you choose to adopt this type of research design.

Case Study Design

With case study research design, you, as the researcher, investigate a single individual (or a single group of individuals) to gain an in-depth understanding of their experiences, behaviours or outcomes. Unlike other research designs that are aimed at larger sample sizes, case studies offer a deep dive into the specific circumstances surrounding a person, group of people, event or phenomenon, generally within a bounded setting or context .

As an example, a case study design could be used to explore the factors influencing the success of a specific small business. This would involve diving deeply into the organisation to explore and understand what makes it tick – from marketing to HR to finance. In terms of data collection, this could include interviews with staff and management, review of policy documents and financial statements, surveying customers, etc.

While the above example is focused squarely on one organisation, it’s worth noting that case study research designs can have different variation s, including single-case, multiple-case and longitudinal designs. As you can see in the example, a single-case design involves intensely examining a single entity to understand its unique characteristics and complexities. Conversely, in a multiple-case design , multiple cases are compared and contrasted to identify patterns and commonalities. Lastly, in a longitudinal case design , a single case or multiple cases are studied over an extended period of time to understand how factors develop over time.

As you can see, a case study research design is particularly useful where a deep and contextualised understanding of a specific phenomenon or issue is desired. However, this strength is also its weakness. In other words, you can’t generalise the findings from a case study to the broader population. So, keep this in mind if you’re considering going the case study route.

How To Choose A Research Design

Having worked through all of these potential research designs, you’d be forgiven for feeling a little overwhelmed and wondering, “ But how do I decide which research design to use? ”. While we could write an entire post covering that alone, here are a few factors to consider that will help you choose a suitable research design for your study.

Data type: The first determining factor is naturally the type of data you plan to be collecting – i.e., qualitative or quantitative. This may sound obvious, but we have to be clear about this – don’t try to use a quantitative research design on qualitative data (or vice versa)!

Research aim(s) and question(s): As with all methodological decisions, your research aim and research questions will heavily influence your research design. For example, if your research aims involve developing a theory from qualitative data, grounded theory would be a strong option. Similarly, if your research aims involve identifying and measuring relationships between variables, one of the experimental designs would likely be a better option.

Time: It’s essential that you consider any time constraints you have, as this will impact the type of research design you can choose. For example, if you’ve only got a month to complete your project, a lengthy design such as ethnography wouldn’t be a good fit.

Resources: Take into account the resources realistically available to you, as these need to factor into your research design choice. For example, if you require highly specialised lab equipment to execute an experimental design, you need to be sure that you’ll have access to that before you make a decision.

Keep in mind that when it comes to research, it’s important to manage your risks and play as conservatively as possible. If your entire project relies on you achieving a huge sample, having access to niche equipment or holding interviews with very difficult-to-reach participants, you’re creating risks that could kill your project. So, be sure to think through your choices carefully and make sure that you have backup plans for any existential risks. Remember that a relatively simple methodology executed well generally will typically earn better marks than a highly-complex methodology executed poorly.

Recap: Key Takeaways

We’ve covered a lot of ground here. Let’s recap by looking at the key takeaways:

• Research design refers to the overall plan, structure or strategy that guides a research project, from its conception to the final analysis of data.
• Research designs for quantitative studies include descriptive , correlational , experimental and quasi-experimenta l designs.
• Research designs for qualitative studies include phenomenological , grounded theory , ethnographic and case study designs.
• When choosing a research design, you need to consider a variety of factors, including the type of data you’ll be working with, your research aims and questions, your time and the resources available to you.

If you need a helping hand with your research design (or any other aspect of your research), check out our private coaching services .

Psst… there’s more (for free)

This post is part of our dissertation mini-course, which covers everything you need to get started with your dissertation, thesis or research project. 

You Might Also Like:

Is there any blog article explaining more on Case study research design? Is there a Case study write-up template? Thank you.

Thanks this was quite valuable to clarify such an important concept.

Thanks for this simplified explanations. it is quite very helpful.

This was really helpful. thanks

Thank you for your explanation. I think case study research design and the use of secondary data in researches needs to be talked about more in your videos and articles because there a lot of case studies research design tailored projects out there.

Please is there any template for a case study research design whose data type is a secondary data on your repository?

This post is very clear, comprehensive and has been very helpful to me. It has cleared the confusion I had in regard to research design and methodology.

This post is helpful, easy to understand, and deconstructs what a research design is. Thanks

how to cite this page

Thank you very much for the post. It is wonderful and has cleared many worries in my mind regarding research designs. I really appreciate .

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• EDIT Edit this Article
• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• Browse Articles
• Learn Something New
• Quizzes Hot
• This Or That Game New
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Education and Communications

How to Get Started With a Research Project

Last Updated: October 3, 2023 Fact Checked

This article was co-authored by Chris Hadley, PhD . Chris Hadley, PhD is part of the wikiHow team and works on content strategy and data and analytics. Chris Hadley earned his PhD in Cognitive Psychology from UCLA in 2006. Chris' academic research has been published in numerous scientific journals. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. This article has been viewed 311,455 times.

You'll be required to undertake and complete research projects throughout your academic career and even, in many cases, as a member of the workforce. Don't worry if you feel stuck or intimidated by the idea of a research project, with care and dedication, you can get the project done well before the deadline!

Development and Foundation

• Don't hesitate while writing down ideas. You'll end up with some mental noise on the paper – silly or nonsensical phrases that your brain just pushes out. That's fine. Think of it as sweeping the cobwebs out of your attic. After a minute or two, better ideas will begin to form (and you might have a nice little laugh at your own expense in the meantime).

• Some instructors will even provide samples of previously successful topics if you ask for them. Just be careful that you don't end up stuck with an idea you want to do, but are afraid to do because you know someone else did it before.

• For example, if your research topic is “urban poverty,” you could look at that topic across ethnic or sexual lines, but you could also look into corporate wages, minimum wage laws, the cost of medical benefits, the loss of unskilled jobs in the urban core, and on and on. You could also try comparing and contrasting urban poverty with suburban or rural poverty, and examine things that might be different about both areas, such as diet and exercise levels, or air pollution.

• Think in terms of questions you want answered. A good research project should collect information for the purpose of answering (or at least attempting to answer) a question. As you review and interconnect topics, you'll think of questions that don't seem to have clear answers yet. These questions are your research topics.

• Don't limit yourself to libraries and online databases. Think in terms of outside resources as well: primary sources, government agencies, even educational TV programs. If you want to know about differences in animal population between public land and an Indian reservation, call the reservation and see if you can speak to their department of fish and wildlife.
• If you're planning to go ahead with original research, that's great – but those techniques aren't covered in this article. Instead, speak with qualified advisors and work with them to set up a thorough, controlled, repeatable process for gathering information.

• If your plan comes down to “researching the topic,” and there aren't any more specific things you can say about it, write down the types of sources you plan to use instead: books (library or private?), magazines (which ones?), interviews, and so on. Your preliminary research should have given you a solid idea of where to begin.

Expanding Your Idea with Research

• It's generally considered more convincing to source one item from three different authors who all agree on it than it is to rely too heavily on one book. Go for quantity at least as much as quality. Be sure to check citations, endnotes, and bibliographies to get more potential sources (and see whether or not all your authors are just quoting the same, older author).
• Writing down your sources and any other relevant details (such as context) around your pieces of information right now will save you lots of trouble in the future.

• Use many different queries to get the database results you want. If one phrasing or a particular set of words doesn't yield useful results, try rephrasing it or using synonymous terms. Online academic databases tend to be dumber than the sum of their parts, so you'll have to use tangentially related terms and inventive language to get all the results you want.

• If it's sensible, consider heading out into the field and speaking to ordinary people for their opinions. This isn't always appropriate (or welcomed) in a research project, but in some cases, it can provide you with some excellent perspective for your research.
• Review cultural artifacts as well. In many areas of study, there's useful information on attitudes, hopes, and/or concerns of people in a particular time and place contained within the art, music, and writing they produced. One has only to look at the woodblock prints of the later German Expressionists, for example, to understand that they lived in a world they felt was often dark, grotesque, and hopeless. Song lyrics and poetry can likewise express strong popular attitudes.

Expert Q&A

• Start early. The foundation of a great research project is the research, which takes time and patience to gather even if you aren't performing any original research of your own. Set aside time for it whenever you can, at least until your initial gathering phase is complete. Past that point, the project should practically come together on its own. Thanks Helpful 1 Not Helpful 0
• When in doubt, write more, rather than less. It's easier to pare down and reorganize an overabundance of information than it is to puff up a flimsy core of facts and anecdotes. Thanks Helpful 1 Not Helpful 0

• Respect the wishes of others. Unless you're a research journalist, it's vital that you yield to the wishes and requests of others before engaging in original research, even if it's technically ethical. Many older American Indians, for instance, harbor a great deal of cultural resentment towards social scientists who visit reservations for research, even those invited by tribal governments for important reasons such as language revitalization. Always tread softly whenever you're out of your element, and only work with those who want to work with you. Thanks Helpful 8 Not Helpful 2
• Be mindful of ethical concerns. Especially if you plan to use original research, there are very stringent ethical guidelines that must be followed for any credible academic body to accept it. Speak to an advisor (such as a professor) about what you plan to do and what steps you should take to verify that it will be ethical. Thanks Helpful 6 Not Helpful 2

You Might Also Like

• ↑ http://www.butte.edu/departments/cas/tipsheets/research/research_paper.html
• ↑ https://www.nhcc.edu/academics/library/doing-library-research/basic-steps-research-process
• ↑ https://library.sacredheart.edu/c.php?g=29803&p=185905
• ↑ https://owl.purdue.edu/owl/general_writing/common_writing_assignments/research_papers/choosing_a_topic.html
• ↑ https://www.unr.edu/writing-speaking-center/student-resources/writing-speaking-resources/using-an-interview-in-a-research-paper
• ↑ https://www.science.org/content/article/how-review-paper

About This Article

The easiest way to get started with a research project is to use your notes and other materials to come up with topics that interest you. Research your favorite topic to see if it can be developed, and then refine it into a research question. Begin thoroughly researching, and collect notes and sources. To learn more about finding reliable and helpful sources while you're researching, continue reading! Did this summary help you? Yes No

• Send fan mail to authors

Reader Success Stories

Jun 30, 2016

Did this article help you?

Maooz Asghar

Aug 14, 2016

Jun 27, 2016

Calvin Kiyondi

Apr 24, 2017

Nov 2, 2016

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

wikiHow Tech Help Pro:

Develop the tech skills you need for work and life

• school Campus Bookshelves
• menu_book Bookshelves
• perm_media Learning Objects
• login Login
• how_to_reg Request Instructor Account
• hub Instructor Commons
• Download Page (PDF)
• Download Full Book (PDF)
• Periodic Table
• Physics Constants
• Scientific Calculator
• Reference & Cite
• Tools expand_more
• Readability

selected template will load here

This action is not available.

2.1.4: Components of a Research Project

• Last updated
• Save as PDF
• Page ID 85831

LEARNING OBJECTIVES

• Describe useful strategies to employ when searching for literature.
• Describe why sociologists review prior literature and how they organize their literature reviews.
• Identify the main sections contained in scholarly journal articles.
• Identify and describe the major components researchers need to plan for when designing a research project.

In this section, we’ll examine the most typical components that make up a research project, bringing in a few additional components to those we have already discussed. Keep in mind that our purpose at this stage is simply to provide a general overview of research design. The specifics of each of the following components will vary from project to project. Further, the stage of a project at which each of these components comes into play may vary. In later chapters, we will consider more specifically how these components work differently depending on the research method being employed.

Searching for Literature

Familiarizing yourself with research that has already been conducted on your topic is one of the first stages of conducting a research project and is crucial for coming up with a good research design. But where to start? How to start? In  Chapter 1.3 "Beginning a Research Project" , you learned about some of the most common databases that house information about published sociological research. As you search for literature, you may have to be fairly broad in your search for articles.

I’m guessing you may feel you’ve heard enough about electronic gadget addiction in this chapter, so let’s consider a different example here. On my campus, much to the chagrin of a group of student smokers, smoking was recently banned. These students were so upset by the idea that they would no longer be allowed to smoke on university grounds that they staged several smoke-outs during which they gathered in populated areas around campus and enjoyed a puff or two together.

A student in my research methods class wanted to understand what motivated this group of students to engage in activism centered around what she perceived to be, in this age of smoke-free facilities, a relatively deviant act. Were the protesters otherwise politically active? How much effort and coordination had it taken to organize the smoke-outs? The student researcher began her research by attempting to familiarize herself with the literature on her topic. Yet her search in Sociological Abstracts for “college student activist smoke-outs,” yielded no results. Concluding there was no prior research on her topic, she informed me that she would need an alternative assignment to the  annotated bibliography  I required since there was no literature for her to review. How do you suppose I responded to this news? What went wrong with this student’s search for literature?

In her first attempt, the student had been too narrow in her search for articles. But did that mean she was off the hook for completing the annotated bibliography assignment? Absolutely not. Instead, she went back to Sociological Abstracts and searched again using different combinations of search terms. Rather than searching for “college student activist smoke-outs” she tried, among other sets of terms, “college student activism.” This time her search yielded a great many articles. Of course, they were not focused on prosmoking activist efforts, but they were focused on her population of interest, college students, and on her broad topic of interest, activism. I suggested that reading articles on college student activism might give her some idea about what other researchers have found in terms of what motivates college students to become involved in activist efforts. I also suggested she could play around with her search terms and look for research on activism centered on other sorts of activities that are perceived by some as deviant, such as marijuana use or veganism. In other words, she needed to be broader in her search for articles.

While this student found success by broadening her search for articles, her reading of those articles needed to be narrower than her search. Once she identified a set of articles to review by searching broadly, it was time to remind herself of her specific research focus: college student activist smoke-outs. Keeping in mind her particular research interest while reviewing the literature gave her the chance to think about how the theories and findings covered in prior studies might or might not apply to her particular point of focus. For example, theories on what motivates activists to get involved might tell her something about the likely reasons the students  she  planned to study got involved. At the same time, those theories might not cover all the particulars of student participation in smoke-outs. Thinking about the different theories then gave the student the opportunity to focus her research plans and even to develop a few hypotheses about what she thought she was likely to find.

Reviewing the Literature

Developing an annotated bibliography is often one of the early steps that researchers take as they begin to familiarize themselves with prior research on their topic. A second step involves a literature review in which a researcher positions his or her work within the context of prior scholarly work in the area. A literature review addresses the following matters: What sorts of questions have other scholars asked about this topic? What do we already know about this topic? What questions remain? As the researcher answers these questions, he or she synthesizes what is contained in the literature, possibly organizing prior findings around themes that are relevant to his or her particular research focus.

I once advised an undergraduate student who conducted a research project on speciesism, the belief that some species are superior to or have more value and rights than others. Her research question was “Why and how do humans construct divisions between themselves and animals?” This student organized her review of literature around the two parts of her research question: the why and the how. In the “why” section of her literature review, she described prior research that addressed questions of why humans are sometimes speciesist. She organized subsections around the three most common answers that were presented in the scholarly literature. She used the same structure in the “how” section of her literature review, arranging subsections around the answers posed in previous literature about  how  humans construct divisions between themselves and animals. This organizational scheme helped readers understand what we already know about the topic and what theories we rely on to help make sense of the topic. In addition, by also highlighting what we still don’t know, it helped the student set the stage for her own empirical research on the topic.

The preceding discussion about how to organize a review of scholarly literature assumes that we all know how to read scholarly literature. Yes, yes, I understand that you must know how to read. But reading scholarly articles can be a bit more challenging than reading a textbook. Here are a few pointers about how to do it successfully. First, it is important to understand the various sections that are typically contained in scholarly journals’ reports of empirical research. One of the most important and easiest to spot sections of a journal article is its  abstract , the short paragraph at the beginning of an article that summarizes the author’s research question, methods used to answer the question, and key findings. The abstract may also give you some idea about the theoretical proclivities of the author. As a result, reading the abstract gives you both a framework for understanding the rest of the article and the punch line. It tells you what the author(s) found and whether the article is relevant to your area of inquiry.

After the abstract, most journal articles will contain the following sections (although exact section names are likely to vary): introduction, literature review, methodology, findings, and discussion. Of course, there will also be a list of references cited,Lists of references cited are a useful source for finding additional literature in an area. and there may be a few tables, figures, or appendices at the end of the article as well. While you should get into the habit of familiarizing yourself with articles you wish to cite  in their entirety , there are strategic ways to read journal articles that can make them a little easier to digest. Once you have read the abstract and determined that this is an article you’d like to read in full, read through the discussion section at the end of the article next. Because your own review of literature is likely to emphasize findings from previous literature, you should make sure that you have a clear idea about what those findings are. Reading an article’s discussion section helps you understand what the author views as the study’s major findings and how the author perceives those findings to relate to other research.

As you read through the rest of the article, think about the elements of research design that we have covered in this chapter. What approach does the researcher take? Is the research exploratory, descriptive, or explanatory? Is it inductive or deductive? Idiographic or nomothetic? Qualitative or quantitative? What claims does the author make about causality? What are the author’s units of analysis and observation? Use what you have learned in this chapter about the promise and potential pitfalls associated with each of these research elements to help you responsibly read and understand the articles you review. Future chapters of this text will address other elements of journal articles, including choices about measurement, sampling, and research method. As you learn about these additional items, you will increasingly gain more knowledge that you can apply as you read and critique the scholarly literature in your area of inquiry.

Additional Important Components

Thinking about the overarching goals of your research project and finding and reviewing the existing literature on your topic are two of the initial steps you’ll take when designing a research project. Forming a clear research question, as discussed in  Chapter 1.3 "Beginning a Research Project" , is another crucial step. There are a number of other important research design components you’ll need to consider, and we will discuss those here.

At the same time that you work to identify a clear research question, you will probably also think about the overarching goals of your research project. Will it be exploratory, descriptive, or explanatory? Will your approach be idiographic or nomothetic, inductive or deductive? How you design your project might also be determined in part by whether you aim for your research to have some direct application or if your goal is to contribute more generally to sociological knowledge about your topic. Next, think about what your units of analysis and units of observation will be. These will help you identify the key concepts you will study. Once you have identified those concepts, you’ll need to decide how to define them, and how you’ll  know  that you’re observing them when it comes time to collect your data. Defining your concepts, and knowing them when you see them, has to do with conceptualization and operationalization. Of course, you also need to know what approach you will take to collect your data. Thus identifying your research method is another important part of research design. You also need to think about who your research participants will be and what larger group(s) they may represent. Last, but certainly not least, you should consider any potential ethical concerns that could arise during the course of your research project. These concerns might come up during your data collection, but they might also arise when you get to the point of analyzing or sharing your research results.

Decisions about the various research components do not necessarily occur in sequential order. In fact, you may have to think about potential ethical concerns even before zeroing in on a specific research question. Similarly, the goal of being able to make generalizations about your population of interest could shape the decisions you make about your method of data collection. Putting it all together, the following list shows some of the major components you’ll need to consider as you design your research project:

• Research question
• Literature review
• Research strategy (idiographic or nomothetic, inductive or deductive)
• Research goals (basic or applied)
• Units of analysis and units of observation
• Key concepts (conceptualization and operationalization)
• Method of data collection
• Research participants (sample and population)
• Ethical concerns

KEY TAKEAWAYS

• When identifying and reading relevant literature, be broad in your search  for  articles, but be narrower in your reading  of  articles.
• Writing an annotated bibliography can be a helpful first step to familiarize yourself with prior research in your area of interest.
• Literature reviews summarize and synthesize prior research.
• Literature reviews are typically organized around substantive ideas that are relevant to one’s research question rather than around individual studies or article authors.
• When designing a research project, be sure to think about, plan for, and identify a research question, a review of literature, a research strategy, research goals, units of analysis and units of observation, key concepts, method(s) of data collection, population and sample, and potential ethical concerns.
• Find and read a complete journal article that addresses a topic that is of interest to you (perhaps using Sociological Abstracts, which is introduced in  Chapter 3.1 "Beginning a Research Project" ). In four to eight sentences, summarize the author’s research question, theoretical framing, methods used, and major findings. Reread the article, and see how close you were in reporting these key elements. What did you understand and remember best? What did you leave out? What reading strategies may have helped you better recall relevant details from the article?
• Using the example of students’ electronic gadget addictions, design a hypothetical research project by identifying a plan for each of the nine components of research design that are presented in this section.

• Visit the University of Nebraska–Lincoln
• Apply to the University of Nebraska–Lincoln
• Give to the University of Nebraska–Lincoln

Search Form

Overview of research process.

The Research Process

Anything you write involves organization and a logical flow of ideas, so understanding the logic of the research process before beginning to write is essential. Simply put, you need to put your writing in the larger context—see the forest before you even attempt to see the trees.

In this brief introductory module, we’ll review the major steps in the research process, conceptualized here as a series of steps within a circle, with each step dependent on the previous one. The circle best depicts the recursive nature of the process; that is, once the process has been completed, the researcher may begin again by refining or expanding on the initial approach, or even pioneering a completely new approach to solving the problem.

Identify a Research Problem

You identify a research problem by first selecting a general topic that’s interesting to you and to the interests and specialties of your research advisor. Once identified, you’ll need to narrow it. For example, if teenage pregnancy is your general topic area, your specific topic could be a comparison of how teenage pregnancy affects young fathers and mothers differently.

Review the Literature

Find out what’s being asked or what’s already been done in the area by doing some exploratory reading. Discuss the topic with your advisor to gain additional insights, explore novel approaches, and begin to develop your research question, purpose statement, and hypothesis(es), if applicable.

Determine Research Question

A good research question is a question worth asking; one that poses a problem worth solving. A good question should:

• Be clear . It must be understandable to you and to others.
• Be researchable . It should be capable of developing into a manageable research design, so data may be collected in relation to it. Extremely abstract terms are unlikely to be suitable.
• Connect with established theory and research . There should be a literature on which you can draw to illuminate how your research question(s) should be approached.
• Be neither too broad nor too narrow. See Appendix A for a brief explanation of the narrowing process and how your research question, purpose statement, and hypothesis(es) are interconnected.

Appendix A Research Questions, Purpose Statement, Hypothesis(es)

Develop Research Methods

Once you’ve finalized your research question, purpose statement, and hypothesis(es), you’ll need to write your research proposal—a detailed management plan for your research project. The proposal is as essential to successful research as an architect’s plans are to the construction of a building.

See Appendix B to view the basic components of a research proposal.

Appendix B Components of a Research Proposal

Collect & Analyze Data

In Practical Research–Planning and Design (2005, 8th Edition), Leedy and Ormrod provide excellent advice for what the researcher does at this stage in the research process. The researcher now

• collects data that potentially relate to the problem,
• arranges the data into a logical organizational structure,
• analyzes and interprets the data to determine their meaning, 
• determines if the data resolve the research problem or not, and
• determines if the data support the hypothesis or not.

Document the Work

Because research reports differ by discipline, the most effective way for you to understand formatting and citations is to examine reports from others in your department or field. The library’s electronic databases provide a wealth of examples illustrating how others in your field document their research.

Communicate Your Research

Talk with your advisor about potential local, regional, or national venues to present your findings. And don’t sell yourself short: Consider publishing your research in related books or journals.

Refine/Expand, Pioneer

Earlier, we emphasized the fact that the research process, rather than being linear, is recursive—the reason we conceptualized the process as a series of steps within a circle. At this stage, you may need to revisit your research problem in the context of your findings. You might also investigate the implications of your work and identify new problems or refine your previous approach.

The process then begins anew . . . and you’ll once again move through the series of steps in the circle.

Continue to Module Two

Appendix C - Key Research Terms

• Request new password
• Create a new account

The Essential Guide to Doing Your Research Project

Student resources.

Examples of Student Research Projects

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• J Cardiovasc Echogr
• v.28(3); Jul-Sep 2018

How to Write a Research Protocol: Tips and Tricks

Matteo cameli.

Department of Cardiovascular Diseases, University of Siena, Siena, Italy

Giuseppina Novo

1 Biomedical Department of Internal Medicine and Medical Specialties, Cardiology Unit, University of Palermo, Palermo, Italy

Maurizio Tusa

2 Division of Cardiology, IRCCS Policlinico San Donato, Italy

Giulia Elena Mandoli

Giovanni corrado.

3 Department of Cardiology, Valduce Hospital, Como, Italy

Frank Benedetto

4 Division of Cardiology, Bianchi-Melacrino-Morelli Hospital, Reggio Calabria, Italy

Francesco Antonini-Canterin

5 High Specialization Rehabilitation Hospital, ORAS, Motta di Livenza, Treviso, Italy

Rodolfo Citro

6 Heart Department, University Hospital “San Giovanni di Dio e Ruggi D’Aragona”, Salerno, Italy

The first drafting of the protocol for a new research project should start from a solid idea with one or more of these goals:

• Overcoming the limits of the current knowledge in a determinate field with the aim of bridging a “knowledge gap”
• Bringing something new in a scarcely explored field
• Validating or nullifying previous results obtained in limited records by studies on a wider population.

A research proposal born with the intent to convince the others that your project is worthy and you are able to manage it with a complete and specific work plan. With a strong idea in mind, it is time to write a document where all the aspects of the future research project must be explained in a precise, understandable manner. This will successively help the researcher to present it and process and elaborate the obtained results.[ 1 ] The protocol manuscript should also underline both the pros and the potentialities of the idea to put it under a new light.[ 2 ]

Our paper will give the authors suggestions and advices regarding how to organize a research protocol, step by step [ Table 1 ].

Main sections and subsections in a complete research protocol

A research protocol must start from the definition of the coordinator of the whole study: all the details of the main investigator must be reported in the first paragraph. This will allow each participant to know who ask for in case of doubts or criticalities during the research. If the study will be multicentric, in the first section must be written also the number of the involved centers, each one possibly matched with the corresponding reference investigator.

Second section: Specific features of the research study

After completing the administrative details, the next step is to provide and extend title of the study: This is made for identifying the field of research and the aim of the study itself in a sort of brief summary of the research; the title must be followed by a unique acronym, like an ID of the protocol. If the protocol has been already exposed and approved by the Ethical Committee, it is appropriate to include also protocol number.

A list of 3–7 keywords must be listed to simplify the collocation of the protocol in its field of research, including, for example, disease, research tools, and analyzed parameters (e.g. three-dimensional echocardiography, right ventricle, end-stage heart failure, and prognosis).

The protocol must continue stating the research background that is the rational cause on the base on which the study is pursued. This section is written to answer some of these questions: what is the project about? What is already available in this field in the current knowledge? Why we need to overcome that data? and How will the community will from the present study?

As for an original research manuscript, the introduction to the project must include a brief review of the literature (with corresponding references). It is also fundamental to support the premises of the study, to underline the importance of the project in that particular time period and above all, of the materials and methods that will be employed. The rationale should accurately put in evidence the current lack in that field of scientific knowledge, following a precise, logical thread with concrete solutions regarding how to overcome the gaps and to conclude with the hypothesis of the project. A distinct paragraph can be dedicated to references, paying attention to select only the previous papers that can help the reader to focus the attention on the topic and to not excessively extend the list. In the references paragraph, the main studies regarding the object of the research but also state-of-art reviews updating the most recent discoveries in the field should be inserted.

The section should successively expose the study design: monocentric or multicentric, retrospective or prospective, controlled or uncontrolled, open-label or blinded, randomized or nonrandomized, and observational or experimental. It should also be explained why that particular design has been chosen.

At this point, the author must include the primary objective of the research, that is, the main goal of the study. This is a crucial part of the proposal and more than 4–5 aims should be avoided to do not reduce the accuracy of the project. Using verbs as “to demonstrate,” “to assess,” “to verify,” “to improve,” “to reduce,” and “to compare” help to give relevance to this section. Add also a description of the general characteristics of the population that will be enrolled in the study (if different subgroups are planned, the criteria on the base of which they will be divided should be specified); primary and secondary end-points, including all the variables that represent the measure of the objective (e.g., all-cause death, cardiovascular death, hospitalization, and side effects of a drug) follow in this section.

All the single parameters and variables that will be assessed during the study must be accurately and precisely listed along with the tools, the methods, the process schedule timing, and the technical details by which they will be acquired; Here, the author should explain how the Investigators who work in the other involved centers have to sent their results and acquired data to the Core Laboratory (e.g. by filled databases or by sending images).

A special attention must then be paid to clarify the planning of each examination the study patients will undergo: basal evaluation, potential follow-up schedule, treatment strategy plan, comparison between new and already-in-use drugs, dose and dosage of the treatment in case of a pharmacological study. This part can be enhanced by flowcharts or algorithms that allow a more immediate comprehension and interpretation of the study strategy.

This section may result more complete if one more subsection, illustrating the expected results, is included. Considering the idea at the base on the project, the endpoints and the pre-arranged objectives, the author can explain how its research project will

• Contribute to optimize the scientific knowledge in that specific field
• Give real successive implications in clinical practice
• Pave the way for future scientific research in the same or similar area of interest, etc.

The study population must be specified in detail, starting from inclusion criteria (including age and gender if it is planned to be restricted) and exclusion criteria: the more precise are the lists, the more accurate the enrollment of the subjects will be to avoid selection biases. This will also help to raise the success rate of the project and to reduce the risks of statistical error during the successive analysis of the data. The sample size should be planned and justified on the base of a statistic calculation considering the incidence and prevalence of the disease, frequency of use of a drug, etc., and possibly also indicating if the study considers a minimal or maximal number of subjects for each enrollment center (in case of multicentric studies).

This section of the protocol should end with some indications regarding timing and duration of the study: Starting and end of enrollment date, starting and end of inclusion date, potential frequency of control examinations, and timing of the analysis of the acquired data. If already settled, it can be useful to indicate also the type of statistical analysis that the investigators will apply to the data.

It is always necessary to prepare an informed consent to be proposed to the patient where premises, methods, and aims of the research together with advantages (e.g., some visits or diagnostic examinations for free) and possible risks derived from the participation to the study.

In this short section, various pieces of information regarding safety of the study must be added (a classification is fundamental in case of studies that expect the use of invasive procedures or drugs use). Usually, for nonobservational studies, an insurance coverage must be considered.

If the investigators have requested or plan to request funding or financial support, all the obtained resources must be listed to avoid conflicts of interest.

C ONCLUSION

Writing a complete and detailed document is a paramount step before starting a research projects. The protocol, as described in this paper, should be simply and correctly written but must clarify all the aspects of the protocol. The document could be divided into three different sessions to give all the parts the appropriate attention.

R EFERENCES

25,000+ students realised their study abroad dream with us. Take the first step today

Here’s your new year gift, one app for all your, study abroad needs, start your journey, track your progress, grow with the community and so much more.

Verification Code

An OTP has been sent to your registered mobile no. Please verify

Thanks for your comment !

Our team will review it before it's shown to our readers.

How to Do a Research Project?

• Updated on  
• Mar 21, 2023

To begin your thesis, the first step is to find a suitable topic per your interests and selecting a good topic is only the beginning of it all. Carrying out a research project, scholars aim to provide answers to the research questions through an in-depth study of the topic. Many universities require their students to submit a research project as part of their course, especially at the master’s level of study and doctoral degrees . So if you are wondering how to do a research project, this blog is for you! Read on to know the different steps to follow to write an excellent research project.

This Blog Includes:

Select a topic of your interest, find a supervisor, invest time in secondary research, locate and analyse primary sources, start drafting your paper, put proper citations, proofread the research project, tips & tricks for doing a research project.

The first step towards doing a research project is choosing a relevant topic. Many students find it difficult to select a topic for their research project since they want to research a popular but less researched topic, something which is difficult to find. Browse through the recent studies and works in your chosen field and then find the best one that you are inclined towards. It is essential to have an innate interest and passion for the topic you have chosen since it will help you work out through all the challenges and hurdles during your research.

An expert supervisor plays an essential role in mentoring the student throughout the journey of the research project. Supervisors are generally professors and scholars in a university who guide students throughout their research addressing their queries regarding the topic along with familiarising them with different research methodologies and processes. So choosing a research knowledgeable supervisor in your field of study is very important in the development of your research project.

You need to have a good grasp of the contemporary work and studies done related to your topic to find out the gaps that you can address in your research project. For this, you need to invest your time in reading the published papers related to your topic diligently. Reading a huge volume of secondary sources will add to your knowledge about the topic and also present you with different primary sources which you can look for.

Primary sources are the backbone of your research. You can look for primary sources in different archives or libraries depending on your discipline, and you can also find out about primary sources and their location from papers already published on your chosen and related topics. Make sure to find and analyse the primary sources in detail and note down your findings.

Use your notes while drafting your paper. Remember that you need to make any changes through multiple drafts before you come up with a paper worthy of commendation. Make sure to send your drafts to your supervisor for feedback and corrections and doubts, and work on the suggestions they provide on your paper.

Citations are an important part of your research project. Not putting proper citations can mark your project as plagiarized. Since universities take plagiarism quite seriously, it is better to know the proper way of citation as specified by the research project format provided by your university. You can also get in touch with your research mentor or supervisor and ask for their advice on citing the sources in your project. 

You should not skip proofreading your paper after completing it. Spelling or grammar mistakes are inevitable while working on a lengthy research project and therefore it is necessary to check it multiple times for such errors. Re-reading your draft can not only help you in making it better by fixing the errors, but also you may identify any gaps or issues in the paper that you can rectify. 

Now that you are familiar with the process of doing a research project, here are some more tips and tricks that you might find useful:

• Create a schedule mapping down every step of your research and adhere to the same.
• Research your topic online and offline to know about the different sources you can explore.
• List down all the sources, both primary and secondary that you consulted for your project as this will help you in adding the citations. 
• Always keep notes to write new ideas and findings of your research as you can easily use them later to add to your project.
• Stay in touch with your supervisor throughout the course of your research project as they can help you efficiently tackle all the challenges and problems and make your thesis as comprehensive as possible.

Ans. These types of questions you can ask in a research project What exactly do you want to study? What is your research question or questions? Why is it worth studying? What is the purpose or significance of your study? Does the proposed study have practical significance?

Ans. There should be no uncertainty in the research topic. Clarity also requires that the research topic be goal-oriented and that it establish the entire research methodology. Half of the formula for good research is a clearly defined and well-phrased research topic.

Ans. Research is the process of looking for solutions to a certain issue. It can be carried out to comprehend a phenomenon, observe behaviour, or test a theory, among other things. Systematic research is carried out, adding to the corpus of knowledge and bolstering numerous theories.

Thus, carrying out a research project is not everyone’s cup of tea as it will need meticulous studying and preparation to finally accomplish it as you have hypothesized. Planning to pursue a research degree? Our Study Abroad experts are here to help you find the best course and university along with sorting out the admission process to ensure that you send a winning application. Sign up for a free session with us today!

Team Leverage Edu

Leave a Reply Cancel reply

Save my name, email, and website in this browser for the next time I comment.

Contact no. *

Leaving already?

8 Universities with higher ROI than IITs and IIMs

Grab this one-time opportunity to download this ebook

Connect With Us

25,000+ students realised their study abroad dream with us. take the first step today..

Resend OTP in

Need help with?

Study abroad.

UK, Canada, US & More

IELTS, GRE, GMAT & More

Scholarship, Loans & Forex

Country Preference

New Zealand

Which English test are you planning to take?

Which academic test are you planning to take.

Not Sure yet

When are you planning to take the exam?

Already booked my exam slot

Within 2 Months

Want to learn about the test

Which Degree do you wish to pursue?

When do you want to start studying abroad.

September 2024

January 2025

What is your budget to study abroad?

How would you describe this article ?

Please rate this article

We would like to hear more.

• Privacy Policy

Buy Me a Coffee

Home » Research Process – Steps, Examples and Tips

Research Process – Steps, Examples and Tips

Table of Contents

Research Process

Definition:

Research Process is a systematic and structured approach that involves the collection, analysis, and interpretation of data or information to answer a specific research question or solve a particular problem.

Research Process Steps

Research Process Steps are as follows:

Identify the Research Question or Problem

This is the first step in the research process. It involves identifying a problem or question that needs to be addressed. The research question should be specific, relevant, and focused on a particular area of interest.

Conduct a Literature Review

Once the research question has been identified, the next step is to conduct a literature review. This involves reviewing existing research and literature on the topic to identify any gaps in knowledge or areas where further research is needed. A literature review helps to provide a theoretical framework for the research and also ensures that the research is not duplicating previous work.

Formulate a Hypothesis or Research Objectives

Based on the research question and literature review, the researcher can formulate a hypothesis or research objectives. A hypothesis is a statement that can be tested to determine its validity, while research objectives are specific goals that the researcher aims to achieve through the research.

Design a Research Plan and Methodology

This step involves designing a research plan and methodology that will enable the researcher to collect and analyze data to test the hypothesis or achieve the research objectives. The research plan should include details on the sample size, data collection methods, and data analysis techniques that will be used.

Collect and Analyze Data

This step involves collecting and analyzing data according to the research plan and methodology. Data can be collected through various methods, including surveys, interviews, observations, or experiments. The data analysis process involves cleaning and organizing the data, applying statistical and analytical techniques to the data, and interpreting the results.

Interpret the Findings and Draw Conclusions

After analyzing the data, the researcher must interpret the findings and draw conclusions. This involves assessing the validity and reliability of the results and determining whether the hypothesis was supported or not. The researcher must also consider any limitations of the research and discuss the implications of the findings.

Communicate the Results

Finally, the researcher must communicate the results of the research through a research report, presentation, or publication. The research report should provide a detailed account of the research process, including the research question, literature review, research methodology, data analysis, findings, and conclusions. The report should also include recommendations for further research in the area.

Review and Revise

The research process is an iterative one, and it is important to review and revise the research plan and methodology as necessary. Researchers should assess the quality of their data and methods, reflect on their findings, and consider areas for improvement.

Ethical Considerations

Throughout the research process, ethical considerations must be taken into account. This includes ensuring that the research design protects the welfare of research participants, obtaining informed consent, maintaining confidentiality and privacy, and avoiding any potential harm to participants or their communities.

Dissemination and Application

The final step in the research process is to disseminate the findings and apply the research to real-world settings. Researchers can share their findings through academic publications, presentations at conferences, or media coverage. The research can be used to inform policy decisions, develop interventions, or improve practice in the relevant field.

Research Process Example

Following is a Research Process Example:

Research Question : What are the effects of a plant-based diet on athletic performance in high school athletes?

Step 1: Background Research Conduct a literature review to gain a better understanding of the existing research on the topic. Read academic articles and research studies related to plant-based diets, athletic performance, and high school athletes.

Step 2: Develop a Hypothesis Based on the literature review, develop a hypothesis that a plant-based diet positively affects athletic performance in high school athletes.

Step 3: Design the Study Design a study to test the hypothesis. Decide on the study population, sample size, and research methods. For this study, you could use a survey to collect data on dietary habits and athletic performance from a sample of high school athletes who follow a plant-based diet and a sample of high school athletes who do not follow a plant-based diet.

Step 4: Collect Data Distribute the survey to the selected sample and collect data on dietary habits and athletic performance.

Step 5: Analyze Data Use statistical analysis to compare the data from the two samples and determine if there is a significant difference in athletic performance between those who follow a plant-based diet and those who do not.

Step 6 : Interpret Results Interpret the results of the analysis in the context of the research question and hypothesis. Discuss any limitations or potential biases in the study design.

Step 7: Draw Conclusions Based on the results, draw conclusions about whether a plant-based diet has a significant effect on athletic performance in high school athletes. If the hypothesis is supported by the data, discuss potential implications and future research directions.

Step 8: Communicate Findings Communicate the findings of the study in a clear and concise manner. Use appropriate language, visuals, and formats to ensure that the findings are understood and valued.

Applications of Research Process

The research process has numerous applications across a wide range of fields and industries. Some examples of applications of the research process include:

• Scientific research: The research process is widely used in scientific research to investigate phenomena in the natural world and develop new theories or technologies. This includes fields such as biology, chemistry, physics, and environmental science.
• Social sciences : The research process is commonly used in social sciences to study human behavior, social structures, and institutions. This includes fields such as sociology, psychology, anthropology, and economics.
• Education: The research process is used in education to study learning processes, curriculum design, and teaching methodologies. This includes research on student achievement, teacher effectiveness, and educational policy.
• Healthcare: The research process is used in healthcare to investigate medical conditions, develop new treatments, and evaluate healthcare interventions. This includes fields such as medicine, nursing, and public health.
• Business and industry : The research process is used in business and industry to study consumer behavior, market trends, and develop new products or services. This includes market research, product development, and customer satisfaction research.
• Government and policy : The research process is used in government and policy to evaluate the effectiveness of policies and programs, and to inform policy decisions. This includes research on social welfare, crime prevention, and environmental policy.

Purpose of Research Process

The purpose of the research process is to systematically and scientifically investigate a problem or question in order to generate new knowledge or solve a problem. The research process enables researchers to:

• Identify gaps in existing knowledge: By conducting a thorough literature review, researchers can identify gaps in existing knowledge and develop research questions that address these gaps.
• Collect and analyze data : The research process provides a structured approach to collecting and analyzing data. Researchers can use a variety of research methods, including surveys, experiments, and interviews, to collect data that is valid and reliable.
• Test hypotheses : The research process allows researchers to test hypotheses and make evidence-based conclusions. Through the systematic analysis of data, researchers can draw conclusions about the relationships between variables and develop new theories or models.
• Solve problems: The research process can be used to solve practical problems and improve real-world outcomes. For example, researchers can develop interventions to address health or social problems, evaluate the effectiveness of policies or programs, and improve organizational processes.
• Generate new knowledge : The research process is a key way to generate new knowledge and advance understanding in a given field. By conducting rigorous and well-designed research, researchers can make significant contributions to their field and help to shape future research.

Tips for Research Process

Here are some tips for the research process:

• Start with a clear research question : A well-defined research question is the foundation of a successful research project. It should be specific, relevant, and achievable within the given time frame and resources.
• Conduct a thorough literature review: A comprehensive literature review will help you to identify gaps in existing knowledge, build on previous research, and avoid duplication. It will also provide a theoretical framework for your research.
• Choose appropriate research methods: Select research methods that are appropriate for your research question, objectives, and sample size. Ensure that your methods are valid, reliable, and ethical.
• Be organized and systematic: Keep detailed notes throughout the research process, including your research plan, methodology, data collection, and analysis. This will help you to stay organized and ensure that you don’t miss any important details.
• Analyze data rigorously: Use appropriate statistical and analytical techniques to analyze your data. Ensure that your analysis is valid, reliable, and transparent.
• I nterpret results carefully : Interpret your results in the context of your research question and objectives. Consider any limitations or potential biases in your research design, and be cautious in drawing conclusions.
• Communicate effectively: Communicate your research findings clearly and effectively to your target audience. Use appropriate language, visuals, and formats to ensure that your findings are understood and valued.
• Collaborate and seek feedback : Collaborate with other researchers, experts, or stakeholders in your field. Seek feedback on your research design, methods, and findings to ensure that they are relevant, meaningful, and impactful.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Data Collection – Methods Types and Examples

Delimitations in Research – Types, Examples and...

Research Design – Types, Methods and Examples

Institutional Review Board – Application Sample...

Evaluating Research – Process, Examples and...

Research Questions – Types, Examples and Writing...

Education During Coronavirus

A Smithsonian magazine special report

Science | June 15, 2020

Seventy-Five Scientific Research Projects You Can Contribute to Online

From astrophysicists to entomologists, many researchers need the help of citizen scientists to sift through immense data collections

Rachael Lallensack

Former Assistant Editor, Science and Innovation

If you find yourself tired of streaming services, reading the news or video-chatting with friends, maybe you should consider becoming a citizen scientist. Though it’s true that many field research projects are paused , hundreds of scientists need your help sifting through wildlife camera footage and images of galaxies far, far away, or reading through diaries and field notes from the past.

Plenty of these tools are free and easy enough for children to use. You can look around for projects yourself on Smithsonian Institution’s citizen science volunteer page , National Geographic ’s list of projects and CitizenScience.gov ’s catalog of options. Zooniverse is a platform for online-exclusive projects , and Scistarter allows you to restrict your search with parameters, including projects you can do “on a walk,” “at night” or “on a lunch break.”

To save you some time, Smithsonian magazine has compiled a collection of dozens of projects you can take part in from home.

American Wildlife

If being home has given you more time to look at wildlife in your own backyard, whether you live in the city or the country, consider expanding your view, by helping scientists identify creatures photographed by camera traps. Improved battery life, motion sensors, high-resolution and small lenses have made camera traps indispensable tools for conservation.These cameras capture thousands of images that provide researchers with more data about ecosystems than ever before.

Smithsonian Conservation Biology Institute’s eMammal platform , for example, asks users to identify animals for conservation projects around the country. Currently, eMammal is being used by the Woodland Park Zoo ’s Seattle Urban Carnivore Project, which studies how coyotes, foxes, raccoons, bobcats and other animals coexist with people, and the Washington Wolverine Project, an effort to monitor wolverines in the face of climate change. Identify urban wildlife for the Chicago Wildlife Watch , or contribute to wilderness projects documenting North American biodiversity with The Wilds' Wildlife Watch in Ohio , Cedar Creek: Eyes on the Wild in Minnesota , Michigan ZoomIN , Western Montana Wildlife and Snapshot Wisconsin .

"Spend your time at home virtually exploring the Minnesota backwoods,” writes the lead researcher of the Cedar Creek: Eyes on the Wild project. “Help us understand deer dynamics, possum populations, bear behavior, and keep your eyes peeled for elusive wolves!"

If being cooped up at home has you daydreaming about traveling, Snapshot Safari has six active animal identification projects. Try eyeing lions, leopards, cheetahs, wild dogs, elephants, giraffes, baobab trees and over 400 bird species from camera trap photos taken in South African nature reserves, including De Hoop Nature Reserve and Madikwe Game Reserve .

With South Sudan DiversityCam , researchers are using camera traps to study biodiversity in the dense tropical forests of southwestern South Sudan. Part of the Serenegeti Lion Project, Snapshot Serengeti needs the help of citizen scientists to classify millions of camera trap images of species traveling with the wildebeest migration.

Classify all kinds of monkeys with Chimp&See . Count, identify and track giraffes in northern Kenya . Watering holes host all kinds of wildlife, but that makes the locales hotspots for parasite transmission; Parasite Safari needs volunteers to help figure out which animals come in contact with each other and during what time of year.

Mount Taranaki in New Zealand is a volcanic peak rich in native vegetation, but native wildlife, like the North Island brown kiwi, whio/blue duck and seabirds, are now rare—driven out by introduced predators like wild goats, weasels, stoats, possums and rats. Estimate predator species compared to native wildlife with Taranaki Mounga by spotting species on camera trap images.

The Zoological Society of London’s (ZSL) Instant Wild app has a dozen projects showcasing live images and videos of wildlife around the world. Look for bears, wolves and lynx in Croatia ; wildcats in Costa Rica’s Osa Peninsula ; otters in Hampshire, England ; and both black and white rhinos in the Lewa-Borana landscape in Kenya.

Under the Sea

Researchers use a variety of technologies to learn about marine life and inform conservation efforts. Take, for example, Beluga Bits , a research project focused on determining the sex, age and pod size of beluga whales visiting the Churchill River in northern Manitoba, Canada. With a bit of training, volunteers can learn how to differentiate between a calf, a subadult (grey) or an adult (white)—and even identify individuals using scars or unique pigmentation—in underwater videos and images. Beluga Bits uses a “ beluga boat ,” which travels around the Churchill River estuary with a camera underneath it, to capture the footage and collect GPS data about the whales’ locations.

Many of these online projects are visual, but Manatee Chat needs citizen scientists who can train their ear to decipher manatee vocalizations. Researchers are hoping to learn what calls the marine mammals make and when—with enough practice you might even be able to recognize the distinct calls of individual animals.

Several groups are using drone footage to monitor seal populations. Seals spend most of their time in the water, but come ashore to breed. One group, Seal Watch , is analyzing time-lapse photography and drone images of seals in the British territory of South Georgia in the South Atlantic. A team in Antarctica captured images of Weddell seals every ten minutes while the seals were on land in spring to have their pups. The Weddell Seal Count project aims to find out what threats—like fishing and climate change—the seals face by monitoring changes in their population size. Likewise, the Año Nuevo Island - Animal Count asks volunteers to count elephant seals, sea lions, cormorants and more species on a remote research island off the coast of California.

With Floating Forests , you’ll sift through 40 years of satellite images of the ocean surface identifying kelp forests, which are foundational for marine ecosystems, providing shelter for shrimp, fish and sea urchins. A project based in southwest England, Seagrass Explorer , is investigating the decline of seagrass beds. Researchers are using baited cameras to spot commercial fish in these habitats as well as looking out for algae to study the health of these threatened ecosystems. Search for large sponges, starfish and cold-water corals on the deep seafloor in Sweden’s first marine park with the Koster seafloor observatory project.

The Smithsonian Environmental Research Center needs your help spotting invasive species with Invader ID . Train your eye to spot groups of organisms, known as fouling communities, that live under docks and ship hulls, in an effort to clean up marine ecosystems.

If art history is more your speed, two Dutch art museums need volunteers to start “ fishing in the past ” by analyzing a collection of paintings dating from 1500 to 1700. Each painting features at least one fish, and an interdisciplinary research team of biologists and art historians wants you to identify the species of fish to make a clearer picture of the “role of ichthyology in the past.”

Interesting Insects

Notes from Nature is a digitization effort to make the vast resources in museums’ archives of plants and insects more accessible. Similarly, page through the University of California Berkeley’s butterfly collection on CalBug to help researchers classify these beautiful critters. The University of Michigan Museum of Zoology has already digitized about 300,000 records, but their collection exceeds 4 million bugs. You can hop in now and transcribe their grasshopper archives from the last century . Parasitic arthropods, like mosquitos and ticks, are known disease vectors; to better locate these critters, the Terrestrial Parasite Tracker project is working with 22 collections and institutions to digitize over 1.2 million specimens—and they’re 95 percent done . If you can tolerate mosquito buzzing for a prolonged period of time, the HumBug project needs volunteers to train its algorithm and develop real-time mosquito detection using acoustic monitoring devices. It’s for the greater good!

For the Birders

Birdwatching is one of the most common forms of citizen science . Seeing birds in the wilderness is certainly awe-inspiring, but you can birdwatch from your backyard or while walking down the sidewalk in big cities, too. With Cornell University’s eBird app , you can contribute to bird science at any time, anywhere. (Just be sure to remain a safe distance from wildlife—and other humans, while we social distance ). If you have safe access to outdoor space—a backyard, perhaps—Cornell also has a NestWatch program for people to report observations of bird nests. Smithsonian’s Migratory Bird Center has a similar Neighborhood Nest Watch program as well.

Birdwatching is easy enough to do from any window, if you’re sheltering at home, but in case you lack a clear view, consider these online-only projects. Nest Quest currently has a robin database that needs volunteer transcribers to digitize their nest record cards.

You can also pitch in on a variety of efforts to categorize wildlife camera images of burrowing owls , pelicans , penguins (new data coming soon!), and sea birds . Watch nest cam footage of the northern bald ibis or greylag geese on NestCams to help researchers learn about breeding behavior.

Or record the coloration of gorgeous feathers across bird species for researchers at London’s Natural History Museum with Project Plumage .

Pretty Plants

If you’re out on a walk wondering what kind of plants are around you, consider downloading Leafsnap , an electronic field guide app developed by Columbia University, the University of Maryland and the Smithsonian Institution. The app has several functions. First, it can be used to identify plants with its visual recognition software. Secondly, scientists can learn about the “ the ebb and flow of flora ” from geotagged images taken by app users.

What is older than the dinosaurs, survived three mass extinctions and still has a living relative today? Ginko trees! Researchers at Smithsonian’s National Museum of Natural History are studying ginko trees and fossils to understand millions of years of plant evolution and climate change with the Fossil Atmospheres project . Using Zooniverse, volunteers will be trained to identify and count stomata, which are holes on a leaf’s surface where carbon dioxide passes through. By counting these holes, or quantifying the stomatal index, scientists can learn how the plants adapted to changing levels of carbon dioxide. These results will inform a field experiment conducted on living trees in which a scientist is adjusting the level of carbon dioxide for different groups.

Help digitize and categorize millions of botanical specimens from natural history museums, research institutions and herbaria across the country with the Notes from Nature Project . Did you know North America is home to a variety of beautiful orchid species? Lend botanists a handby typing handwritten labels on pressed specimens or recording their geographic and historic origins for the New York Botanical Garden’s archives. Likewise, the Southeastern U.S. Biodiversity project needs assistance labeling pressed poppies, sedums, valerians, violets and more. Groups in California , Arkansas , Florida , Texas and Oklahoma all invite citizen scientists to partake in similar tasks.

Historic Women in Astronomy

Become a transcriber for Project PHaEDRA and help researchers at the Harvard-Smithsonian Center for Astrophysics preserve the work of Harvard’s women “computers” who revolutionized astronomy in the 20th century. These women contributed more than 130 years of work documenting the night sky, cataloging stars, interpreting stellar spectra, counting galaxies, and measuring distances in space, according to the project description .

More than 2,500 notebooks need transcription on Project PhaEDRA - Star Notes . You could start with Annie Jump Cannon , for example. In 1901, Cannon designed a stellar classification system that astronomers still use today. Cecilia Payne discovered that stars are made primarily of hydrogen and helium and can be categorized by temperature. Two notebooks from Henrietta Swan Leavitt are currently in need of transcription. Leavitt, who was deaf, discovered the link between period and luminosity in Cepheid variables, or pulsating stars, which “led directly to the discovery that the Universe is expanding,” according to her bio on Star Notes .

Volunteers are also needed to transcribe some of these women computers’ notebooks that contain references to photographic glass plates . These plates were used to study space from the 1880s to the 1990s. For example, in 1890, Williamina Flemming discovered the Horsehead Nebula on one of these plates . With Star Notes, you can help bridge the gap between “modern scientific literature and 100 years of astronomical observations,” according to the project description . Star Notes also features the work of Cannon, Leavitt and Dorrit Hoffleit , who authored the fifth edition of the Bright Star Catalog, which features 9,110 of the brightest stars in the sky.

Microscopic Musings

Electron microscopes have super-high resolution and magnification powers—and now, many can process images automatically, allowing teams to collect an immense amount of data. Francis Crick Institute’s Etch A Cell - Powerhouse Hunt project trains volunteers to spot and trace each cell’s mitochondria, a process called manual segmentation. Manual segmentation is a major bottleneck to completing biological research because using computer systems to complete the work is still fraught with errors and, without enough volunteers, doing this work takes a really long time.

For the Monkey Health Explorer project, researchers studying the social behavior of rhesus monkeys on the tiny island Cayo Santiago off the southeastern coast of Puerto Rico need volunteers to analyze the monkeys’ blood samples. Doing so will help the team understand which monkeys are sick and which are healthy, and how the animals’ health influences behavioral changes.

Using the Zooniverse’s app on a phone or tablet, you can become a “ Science Scribbler ” and assist researchers studying how Huntington disease may change a cell’s organelles. The team at the United Kingdom's national synchrotron , which is essentially a giant microscope that harnesses the power of electrons, has taken highly detailed X-ray images of the cells of Huntington’s patients and needs help identifying organelles, in an effort to see how the disease changes their structure.

Oxford University’s Comprehensive Resistance Prediction for Tuberculosis: an International Consortium—or CRyPTIC Project , for short, is seeking the aid of citizen scientists to study over 20,000 TB infection samples from around the world. CRyPTIC’s citizen science platform is called Bash the Bug . On the platform, volunteers will be trained to evaluate the effectiveness of antibiotics on a given sample. Each evaluation will be checked by a scientist for accuracy and then used to train a computer program, which may one day make this process much faster and less labor intensive.

Out of This World

If you’re interested in contributing to astronomy research from the comfort and safety of your sidewalk or backyard, check out Globe at Night . The project monitors light pollution by asking users to try spotting constellations in the night sky at designated times of the year . (For example, Northern Hemisphere dwellers should look for the Bootes and Hercules constellations from June 13 through June 22 and record the visibility in Globe at Night’s app or desktop report page .)

For the amateur astrophysicists out there, the opportunities to contribute to science are vast. NASA's Wide-field Infrared Survey Explorer (WISE) mission is asking for volunteers to search for new objects at the edges of our solar system with the Backyard Worlds: Planet 9 project .

Galaxy Zoo on Zooniverse and its mobile app has operated online citizen science projects for the past decade. According to the project description, there are roughly one hundred billion galaxies in the observable universe. Surprisingly, identifying different types of galaxies by their shape is rather easy. “If you're quick, you may even be the first person to see the galaxies you're asked to classify,” the team writes.

With Radio Galaxy Zoo: LOFAR , volunteers can help identify supermassive blackholes and star-forming galaxies. Galaxy Zoo: Clump Scout asks users to look for young, “clumpy” looking galaxies, which help astronomers understand galaxy evolution.

If current events on Earth have you looking to Mars, perhaps you’d be interested in checking out Planet Four and Planet Four: Terrains —both of which task users with searching and categorizing landscape formations on Mars’ southern hemisphere. You’ll scroll through images of the Martian surface looking for terrain types informally called “spiders,” “baby spiders,” “channel networks” and “swiss cheese.”

Gravitational waves are telltale ripples in spacetime, but they are notoriously difficult to measure. With Gravity Spy , citizen scientists sift through data from Laser Interferometer Gravitational­-Wave Observatory, or LIGO , detectors. When lasers beamed down 2.5-mile-long “arms” at these facilities in Livingston, Louisiana and Hanford, Washington are interrupted, a gravitational wave is detected. But the detectors are sensitive to “glitches” that, in models, look similar to the astrophysical signals scientists are looking for. Gravity Spy teaches citizen scientists how to identify fakes so researchers can get a better view of the real deal. This work will, in turn, train computer algorithms to do the same.

Similarly, the project Supernova Hunters needs volunteers to clear out the “bogus detections of supernovae,” allowing researchers to track the progression of actual supernovae. In Hubble Space Telescope images, you can search for asteroid tails with Hubble Asteroid Hunter . And with Planet Hunters TESS , which teaches users to identify planetary formations, you just “might be the first person to discover a planet around a nearby star in the Milky Way,” according to the project description.

Help astronomers refine prediction models for solar storms, which kick up dust that impacts spacecraft orbiting the sun, with Solar Stormwatch II. Thanks to the first iteration of the project, astronomers were able to publish seven papers with their findings.

With Mapping Historic Skies , identify constellations on gorgeous celestial maps of the sky covering a span of 600 years from the Adler Planetarium collection in Chicago. Similarly, help fill in the gaps of historic astronomy with Astronomy Rewind , a project that aims to “make a holistic map of images of the sky.”

Get the latest Science stories in your inbox.

Rachael Lallensack | READ MORE

Rachael Lallensack is the former assistant web editor for science and innovation at Smithsonian .

Choose Your Test

Sat / act prep online guides and tips, 113 great research paper topics.

General Education

One of the hardest parts of writing a research paper can be just finding a good topic to write about. Fortunately we've done the hard work for you and have compiled a list of 113 interesting research paper topics. They've been organized into ten categories and cover a wide range of subjects so you can easily find the best topic for you.

In addition to the list of good research topics, we've included advice on what makes a good research paper topic and how you can use your topic to start writing a great paper.

What Makes a Good Research Paper Topic?

Not all research paper topics are created equal, and you want to make sure you choose a great topic before you start writing. Below are the three most important factors to consider to make sure you choose the best research paper topics.

#1: It's Something You're Interested In

A paper is always easier to write if you're interested in the topic, and you'll be more motivated to do in-depth research and write a paper that really covers the entire subject. Even if a certain research paper topic is getting a lot of buzz right now or other people seem interested in writing about it, don't feel tempted to make it your topic unless you genuinely have some sort of interest in it as well.

#2: There's Enough Information to Write a Paper

Even if you come up with the absolute best research paper topic and you're so excited to write about it, you won't be able to produce a good paper if there isn't enough research about the topic. This can happen for very specific or specialized topics, as well as topics that are too new to have enough research done on them at the moment. Easy research paper topics will always be topics with enough information to write a full-length paper.

Trying to write a research paper on a topic that doesn't have much research on it is incredibly hard, so before you decide on a topic, do a bit of preliminary searching and make sure you'll have all the information you need to write your paper.

#3: It Fits Your Teacher's Guidelines

Don't get so carried away looking at lists of research paper topics that you forget any requirements or restrictions your teacher may have put on research topic ideas. If you're writing a research paper on a health-related topic, deciding to write about the impact of rap on the music scene probably won't be allowed, but there may be some sort of leeway. For example, if you're really interested in current events but your teacher wants you to write a research paper on a history topic, you may be able to choose a topic that fits both categories, like exploring the relationship between the US and North Korea. No matter what, always get your research paper topic approved by your teacher first before you begin writing.

113 Good Research Paper Topics

Below are 113 good research topics to help you get you started on your paper. We've organized them into ten categories to make it easier to find the type of research paper topics you're looking for.

Arts/Culture

• Discuss the main differences in art from the Italian Renaissance and the Northern Renaissance .
• Analyze the impact a famous artist had on the world.
• How is sexism portrayed in different types of media (music, film, video games, etc.)? Has the amount/type of sexism changed over the years?
• How has the music of slaves brought over from Africa shaped modern American music?
• How has rap music evolved in the past decade?
• How has the portrayal of minorities in the media changed?

Current Events

• What have been the impacts of China's one child policy?
• How have the goals of feminists changed over the decades?
• How has the Trump presidency changed international relations?
• Analyze the history of the relationship between the United States and North Korea.
• What factors contributed to the current decline in the rate of unemployment?
• What have been the impacts of states which have increased their minimum wage?
• How do US immigration laws compare to immigration laws of other countries?
• How have the US's immigration laws changed in the past few years/decades?
• How has the Black Lives Matter movement affected discussions and view about racism in the US?
• What impact has the Affordable Care Act had on healthcare in the US?
• What factors contributed to the UK deciding to leave the EU (Brexit)?
• What factors contributed to China becoming an economic power?
• Discuss the history of Bitcoin or other cryptocurrencies  (some of which tokenize the S&P 500 Index on the blockchain) .
• Do students in schools that eliminate grades do better in college and their careers?
• Do students from wealthier backgrounds score higher on standardized tests?
• Do students who receive free meals at school get higher grades compared to when they weren't receiving a free meal?
• Do students who attend charter schools score higher on standardized tests than students in public schools?
• Do students learn better in same-sex classrooms?
• How does giving each student access to an iPad or laptop affect their studies?
• What are the benefits and drawbacks of the Montessori Method ?
• Do children who attend preschool do better in school later on?
• What was the impact of the No Child Left Behind act?
• How does the US education system compare to education systems in other countries?
• What impact does mandatory physical education classes have on students' health?
• Which methods are most effective at reducing bullying in schools?
• Do homeschoolers who attend college do as well as students who attended traditional schools?
• Does offering tenure increase or decrease quality of teaching?
• How does college debt affect future life choices of students?
• Should graduate students be able to form unions?

• What are different ways to lower gun-related deaths in the US?
• How and why have divorce rates changed over time?
• Is affirmative action still necessary in education and/or the workplace?
• Should physician-assisted suicide be legal?
• How has stem cell research impacted the medical field?
• How can human trafficking be reduced in the United States/world?
• Should people be able to donate organs in exchange for money?
• Which types of juvenile punishment have proven most effective at preventing future crimes?
• Has the increase in US airport security made passengers safer?
• Analyze the immigration policies of certain countries and how they are similar and different from one another.
• Several states have legalized recreational marijuana. What positive and negative impacts have they experienced as a result?
• Do tariffs increase the number of domestic jobs?
• Which prison reforms have proven most effective?
• Should governments be able to censor certain information on the internet?
• Which methods/programs have been most effective at reducing teen pregnancy?
• What are the benefits and drawbacks of the Keto diet?
• How effective are different exercise regimes for losing weight and maintaining weight loss?
• How do the healthcare plans of various countries differ from each other?
• What are the most effective ways to treat depression ?
• What are the pros and cons of genetically modified foods?
• Which methods are most effective for improving memory?
• What can be done to lower healthcare costs in the US?
• What factors contributed to the current opioid crisis?
• Analyze the history and impact of the HIV/AIDS epidemic .
• Are low-carbohydrate or low-fat diets more effective for weight loss?
• How much exercise should the average adult be getting each week?
• Which methods are most effective to get parents to vaccinate their children?
• What are the pros and cons of clean needle programs?
• How does stress affect the body?
• Discuss the history of the conflict between Israel and the Palestinians.
• What were the causes and effects of the Salem Witch Trials?
• Who was responsible for the Iran-Contra situation?
• How has New Orleans and the government's response to natural disasters changed since Hurricane Katrina?
• What events led to the fall of the Roman Empire?
• What were the impacts of British rule in India ?
• Was the atomic bombing of Hiroshima and Nagasaki necessary?
• What were the successes and failures of the women's suffrage movement in the United States?
• What were the causes of the Civil War?
• How did Abraham Lincoln's assassination impact the country and reconstruction after the Civil War?
• Which factors contributed to the colonies winning the American Revolution?
• What caused Hitler's rise to power?
• Discuss how a specific invention impacted history.
• What led to Cleopatra's fall as ruler of Egypt?
• How has Japan changed and evolved over the centuries?
• What were the causes of the Rwandan genocide ?

• Why did Martin Luther decide to split with the Catholic Church?
• Analyze the history and impact of a well-known cult (Jonestown, Manson family, etc.)
• How did the sexual abuse scandal impact how people view the Catholic Church?
• How has the Catholic church's power changed over the past decades/centuries?
• What are the causes behind the rise in atheism/ agnosticism in the United States?
• What were the influences in Siddhartha's life resulted in him becoming the Buddha?
• How has media portrayal of Islam/Muslims changed since September 11th?

Science/Environment

• How has the earth's climate changed in the past few decades?
• How has the use and elimination of DDT affected bird populations in the US?
• Analyze how the number and severity of natural disasters have increased in the past few decades.
• Analyze deforestation rates in a certain area or globally over a period of time.
• How have past oil spills changed regulations and cleanup methods?
• How has the Flint water crisis changed water regulation safety?
• What are the pros and cons of fracking?
• What impact has the Paris Climate Agreement had so far?
• What have NASA's biggest successes and failures been?
• How can we improve access to clean water around the world?
• Does ecotourism actually have a positive impact on the environment?
• Should the US rely on nuclear energy more?
• What can be done to save amphibian species currently at risk of extinction?
• What impact has climate change had on coral reefs?
• How are black holes created?
• Are teens who spend more time on social media more likely to suffer anxiety and/or depression?
• How will the loss of net neutrality affect internet users?
• Analyze the history and progress of self-driving vehicles.
• How has the use of drones changed surveillance and warfare methods?
• Has social media made people more or less connected?
• What progress has currently been made with artificial intelligence ?
• Do smartphones increase or decrease workplace productivity?
• What are the most effective ways to use technology in the classroom?
• How is Google search affecting our intelligence?
• When is the best age for a child to begin owning a smartphone?
• Has frequent texting reduced teen literacy rates?

How to Write a Great Research Paper

Even great research paper topics won't give you a great research paper if you don't hone your topic before and during the writing process. Follow these three tips to turn good research paper topics into great papers.

#1: Figure Out Your Thesis Early

Before you start writing a single word of your paper, you first need to know what your thesis will be. Your thesis is a statement that explains what you intend to prove/show in your paper. Every sentence in your research paper will relate back to your thesis, so you don't want to start writing without it!

As some examples, if you're writing a research paper on if students learn better in same-sex classrooms, your thesis might be "Research has shown that elementary-age students in same-sex classrooms score higher on standardized tests and report feeling more comfortable in the classroom."

If you're writing a paper on the causes of the Civil War, your thesis might be "While the dispute between the North and South over slavery is the most well-known cause of the Civil War, other key causes include differences in the economies of the North and South, states' rights, and territorial expansion."

#2: Back Every Statement Up With Research

Remember, this is a research paper you're writing, so you'll need to use lots of research to make your points. Every statement you give must be backed up with research, properly cited the way your teacher requested. You're allowed to include opinions of your own, but they must also be supported by the research you give.

#3: Do Your Research Before You Begin Writing

You don't want to start writing your research paper and then learn that there isn't enough research to back up the points you're making, or, even worse, that the research contradicts the points you're trying to make!

Get most of your research on your good research topics done before you begin writing. Then use the research you've collected to create a rough outline of what your paper will cover and the key points you're going to make. This will help keep your paper clear and organized, and it'll ensure you have enough research to produce a strong paper.

What's Next?

Are you also learning about dynamic equilibrium in your science class? We break this sometimes tricky concept down so it's easy to understand in our complete guide to dynamic equilibrium .

Thinking about becoming a nurse practitioner? Nurse practitioners have one of the fastest growing careers in the country, and we have all the information you need to know about what to expect from nurse practitioner school .

Want to know the fastest and easiest ways to convert between Fahrenheit and Celsius? We've got you covered! Check out our guide to the best ways to convert Celsius to Fahrenheit (or vice versa).

These recommendations are based solely on our knowledge and experience. If you purchase an item through one of our links, PrepScholar may receive a commission.

Christine graduated from Michigan State University with degrees in Environmental Biology and Geography and received her Master's from Duke University. In high school she scored in the 99th percentile on the SAT and was named a National Merit Finalist. She has taught English and biology in several countries.

Student and Parent Forum

Our new student and parent forum, at ExpertHub.PrepScholar.com , allow you to interact with your peers and the PrepScholar staff. See how other students and parents are navigating high school, college, and the college admissions process. Ask questions; get answers.

Ask a Question Below

Have any questions about this article or other topics? Ask below and we'll reply!

Improve With Our Famous Guides

• For All Students

The 5 Strategies You Must Be Using to Improve 160+ SAT Points

How to Get a Perfect 1600, by a Perfect Scorer

Series: How to Get 800 on Each SAT Section:

Score 800 on SAT Math

Score 800 on SAT Reading

Score 800 on SAT Writing

Series: How to Get to 600 on Each SAT Section:

Score 600 on SAT Math

Score 600 on SAT Reading

Score 600 on SAT Writing

Free Complete Official SAT Practice Tests

What SAT Target Score Should You Be Aiming For?

15 Strategies to Improve Your SAT Essay

The 5 Strategies You Must Be Using to Improve 4+ ACT Points

How to Get a Perfect 36 ACT, by a Perfect Scorer

Series: How to Get 36 on Each ACT Section:

36 on ACT English

36 on ACT Math

36 on ACT Reading

36 on ACT Science

Series: How to Get to 24 on Each ACT Section:

24 on ACT English

24 on ACT Math

24 on ACT Reading

24 on ACT Science

What ACT target score should you be aiming for?

ACT Vocabulary You Must Know

ACT Writing: 15 Tips to Raise Your Essay Score

How to Get Into Harvard and the Ivy League

How to Get a Perfect 4.0 GPA

How to Write an Amazing College Essay

What Exactly Are Colleges Looking For?

Is the ACT easier than the SAT? A Comprehensive Guide

Should you retake your SAT or ACT?

When should you take the SAT or ACT?

Stay Informed

Get the latest articles and test prep tips!

Looking for Graduate School Test Prep?

Check out our top-rated graduate blogs here:

GRE Online Prep Blog

GMAT Online Prep Blog

TOEFL Online Prep Blog

Holly R. "I am absolutely overjoyed and cannot thank you enough for helping me!”

• NIH Grants & Funding
• Blog Policies

NIH Extramural Nexus

Preparing for Funding Opportunities Using the Simplified Review Framework 

Last October, we announced that NIH was implementing a simplified review framework for most research project grants (RPGs). As a reminder, in the simplified review framework NIH aims to better facilitate the mission of scientific peer review – identification of the strongest, highest-impact research. The changes are intended to:

• Enable peer reviewers to better focus on answering the key questions necessary to assess the scientific and technical merit of proposed research projects: Can and should the proposed research project be conducted?
• Mitigate the effect of reputational bias by refocusing the evaluation of investigator/environment to within the context of the proposed research.
• Reduce reviewer burden by shifting policy compliance activities to NIH staff.

Today, NIH released a Guide Notice ( NOT-OD-24-085) to provide an update on our implementation plans for the simplified review framework. The Notice provides guidance to applicants on navigating new and updated funding opportunities expected to be published between now and January 2025.

Prior to January, the community will notice that many funding opportunities for applicable activity codes are being reissued to include the simplified review framework language in Section V. Application Review Information. Active funding opportunities with due dates on or after January 25, 2025, will be expired early and most will be reissued to reflect the simplified review framework. Funding opportunities with pending expiration dates prior to January 25, 2025, including impacted parent announcements, may be extended with additional due dates until they can be reissued with the simplified review framework.

Applicants should pay close attention to the Related Notices and Key Dates sections of funding opportunities to ensure they are applying to the right opportunity for their target due date. To stay informed of notices and funding opportunity reissuances, we encourage you to monitor the NIH Guide for Grants and Contracts, where any changes will be published (you can also subscribe to a weekly digest of new NIH Guide posts).

Please note that although there are no application changes associated with the simplified review framework, NIH is transitioning to updated application forms (FORMS-I) to support other initiatives. FORMS-I will be required for due dates on or after January 25, 2025 (See these Notices for FORMS-I and Changes Coming in 2025 , as well as this blog on 2025 changes ). New and reissued funding opportunities using the simplified review framework may initially be posted without an application forms package. In these cases, application forms will be added 30 – 60 days prior to the first application due date. Applicants can begin drafting their application attachments before FORMS-I becomes available using the current FORMS-H instructions and adjust if needed once FORMS-I instructions are available.

We encourage applicants to review today’s Guide Notice for more details on NIH’s implementation plans, as well as register for a public webinar on April 17 from 1 – 2pm EDT to learn more about navigating these changes and have an opportunity to get their questions answered.

We have provided various resources on our Simplified Review Framework web page to help the community understand the changes associated with the simplified review framework, including a summary statement mockup, critique template , drop-in slides , and a recording of the November online briefing. Applicants and reviewers can expect to receive plenty of guidance and support as we near January 2025.

RELATED NEWS

Before submitting your comment, please review our blog comment policies.

Your email address will not be published. Required fields are marked *

• Share full article

Advertisement

Supported by

A New Chapter for Irish Historians’ ‘Saddest Book’

A globe-spanning research project has turned the catalog of a public archive destroyed in Ireland’s civil war into a model for reconstruction.

By Ed O’Loughlin

Reporting from Dublin

In the first pitched battle of the civil war that shaped a newly independent Ireland, seven centuries of history burned.

On June 30, 1922, forces for and against an accommodation with Britain, Ireland’s former colonial ruler, had been fighting for three days around Dublin’s main court complex. The national Public Record Office was part of the complex, and that day it was caught in a colossal explosion . The blast and the resulting fire destroyed state secrets, church records, property deeds, tax receipts, legal documents, financial data, census returns and much more, dating back to the Middle Ages.

“It was a catastrophe,” said Peter Crooks, a medieval historian at Trinity College Dublin. “This happened just after the First World War, when all over Europe new states like Ireland were emerging from old empires. They were all trying to recover and celebrate their own histories and cultures, and now Ireland had just lost the heart of its own.”

But perhaps it was not lost forever. Over the past seven years, a team of historians, librarians and computer experts based at Trinity has located duplicates for a quarter of a million pages of these lost records in forgotten volumes housed at far-flung libraries and archives, including several in the United States. The team then creates digital copies of any documents that it finds for inclusion in the Virtual Record Treasury of Ireland , an online reconstruction of the archive. Still a work in progress, the project says its website has had more than two million visits in less than two years.

Funded by the Irish government as part of its commemorations of a century of independence, the Virtual Treasury relies in part on modern technologies — virtual imaging, online networks, artificial intelligence language models and the growing digital indexes of archives around the world — but also on dusty printed catalogs and old-school human contacts. Key to the enterprise has been a book, “A Guide to the Records Deposited in the Public Record Office of Ireland,” published three years before the fire by the office’s head archivist, Herbert Wood.

“For a long time, Wood’s catalog was known to Irish historians as the saddest book in the world, because it only showed what was lost in the fire,” Dr. Crooks said. “But now it has become the basis for our model to recreate the national archive. There were 4,500 series of records listed in Wood’s book, and we went out to look for as many of them as we could find.”

A major partner in this hunt was the National Archives in Britain, to which centuries of Irish government records — notably tax receipts — had been sent in duplicate. The Public Record Office of Northern Ireland, which remains part of the United Kingdom, has also been a major partner, contributing records from the centuries before Ireland was partitioned in 1921.

A considerable haul of documents has also been uncovered in the United States. The Library of Congress, for example, dug up dozens of volumes of lost debates from Ireland’s 18th-century Parliament. According to David Brown, who leads the Virtual Treasury’s trawl through domestic and overseas archives, before this trove of political history came into Congress’s possession, one previous owner had tried to sell it as fuel. Serendipity has often played a role in such U.S. discoveries, he said.

“You would have old family records stored away in some gentleman’s library, and he’d move to the colonies, and take the books with him,” Dr. Brown said. “Or else heirs would eventually sell the old library off to collectors, and eventually an American university or library might buy the collection, maybe because they wanted something important in it, and they took everything else that came with it. Archivists may not always know what they have, but they never throw anything out.”

The Huntington Library in California, and libraries of the universities of Kansas, Chicago, Notre Dame, Yale and Harvard are among around a dozen U.S. organizations to respond positively to the hopeful request from the Irish: “Do you have anything there that might be of interest to us?” And in the process of hunting down material that is already on its radar, the Virtual Treasury team is also uncovering, and incorporating, unexpected treasures.

One is a previously unnoticed 1595 letter shown to Dr. Brown late last year while he was visiting Yale’s Lewis Walpole Library to view some other material. In it, Sir Ralph Lane — a founder and survivor of the infamous lost colony of Roanoke, off North Carolina, which had vanished in the decade before this letter was written — petitions Queen Elizabeth I to order the conquest of Ulster, then a Gaelic stronghold in the north of English-ruled Ireland.

Dr. Brown, a specialist in early modern Atlantic history, said the letter — long overlooked because it was bound in a volume with much later documents — showed the close connection between England’s colonial conquests in North America and Ireland, both in the personalities involved and their motivation. The letter suggests conquering Ulster primarily so that the English could seize the inhabitants’ land, and it proposes paying for the war by looting the Ulster chiefs’ cattle. The area was ultimately conquered and colonized in 1609, six years after Lane’s death.

“For the Elizabethan adventurers, colonialism was a branch of piracy. All they wanted was land,” Dr. Brown said. “Roanoke hadn’t worked out for Lane, and Elizabeth had just granted Sir Walter Raleigh 10,000 acres of land in Munster,” in the south of Ireland. “So Lane thought, if Raleigh got 10,000 acres in Munster, why can’t I have 10,000 acres in Ulster?”

Another contribution to the project could be seen in contemporary Northern Ireland, at the Public Record Office in Belfast. The head of conservation, Sarah Graham, was restoring and preserving a collection of records and letters kept by Archbishop John Swayne, who led the church in Ireland in the 15th century. Watching her at work was Lynn Kilgallon, research fellow in medieval history for the Virtual Treasury. Once preserved, its pages will be digitized and added to Dublin’s online archive.

“If you don’t understand the words in a book, it becomes just an object,” Ms. Graham said. “You need someone to read it — medievalists like Lynn here, to bring it to life.”

You do not necessarily need to be a specialist to read the documents in the Virtual Treasury, however. New artificial intelligence models developed for the project allow archivists to turn ancient handwriting into searchable digital text, with modern translations.

The site went online in June 2022, the 100th anniversary of the records office fire, and is aiming for 100 million searchable words by 2025, a target it says it is three-quarters of the way to reaching. Eventually, it hopes to recover 50 to 90 percent of records from some priority areas, such as censuses from before and after Ireland’s Great Famine in the mid-19th century, which are of particular value to historians, and to people of Irish descent tracing their roots. More than half of the details of the first nationwide census of Ireland, a religious head count in 1766, have been retrieved and published.

“Cultural loss is sadly a very prominent theme in the world right now, and I don’t think there is an example like this, where there’s been so much international cooperation in the reconstruction of a lost archive,” Dr. Crooks said. “It shows that the collective culture of many countries can be brought together to achieve a goal. Borders are fluid.”

Selected Projects Will Address Energy Security Research and Training Needs for Each Unique Region

WASHINGTON, D.C. -- Today, the U.S. Department of Energy (DOE) announced $15 million in funding to establish six university-based electric power cybersecurity centers that will foster collaborations across the energy sector to address gaps in energy security research and provide cybersecurity education programs. Each university, selected by the DOE’s Office of Cybersecurity, Energy Security, and Emergency Response (CESER), will partner with energy sector owners and operators, vendors, and DOE National Laboratories to conduct innovative cybersecurity research and develop cybersecurity trainings that will meet the needs of the energy workforce in their regions. The university-based cybersecurity centers directly align with the Biden-Harris Administration’s commitment to bolstering secure energy infrastructure and a skilled energy workforce to tackle the existing and emerging cyber threats facing the sector. 

"This investment in university-based cybersecurity centers will enable us to simultaneously grow the U.S. cyber workforce and build the expertise we need to take on the evolving cyber threats to our nation's energy systems," said Director of CESER, Puesh M. Kumar. "The U.S. competitive advantage has always depended on cutting-edge research and a high-skilled workforce. Through these projects, we are advancing our economic and national security." 

The industry partnerships will help the university-based cybersecurity centers research cybersecurity capabilities that consider the distinctive characteristics of each region's electricity system, network of infrastructure, and workforce skills. Their research will combine multidisciplinary expertise, such as power system engineering and cybersecurity, to find solutions that will reduce the risk of power disruption resulting from a cyber-incident in an energy delivery system. The selected universities, listed below, will conduct the following research projects at their new cybersecurity centers: 

• The University of Connecticut (Mansfield, Connecticut) will develop tools to isolate and mitigate the effects of cyber attacks on distributed energy resources (DER) to quickly restore devices to operational states. The project will use data from across the Northeast region’s urban, suburban, and rural environments, making this work scalable to a variety of system operators and utilities. Project title: CyberCARED: Northeast University Cybersecurity Center for Advanced and Resilient Energy Delivery 
• The Iowa State University (Ames, Iowa) will focus on improving the security and resilience of the distribution grid that includes DER and microgrids, including real-time cyber situational awareness for distribution management systems. Several project partners bring expertise in rural energy issues, which is key for implementing next-generation grid infrastructure. Project title: CyDERMS: Center for Cybersecurity & Resiliency of DERs and Microgrids-integrated Distribution Systems    
• The University of Pittsburgh (Pittsburgh, Pennsylvania) will use digital twins to evaluate the effectiveness of protections for cyber attacks and assess the impact of cybersecurity compromises. Their diverse project partners will help focus the project on existing gaps in cybersecurity research. Project title: University of Pittsburgh Cyber Energy Center   
• The Illinois Institute of Technology (Chicago, Illinois) will address cybersecurity issues in DER and microgrids and understand how system operators can contribute to efficient cyber attack detection and response. They plan to distribute their findings through workshops, symposia, and trainings. Project title: 2MC: Midwest Center for Microgrid Cybersecurity   
• The Texas Tech University (Lubbock, Texas) will develop a single framework that addresses the various stages of cyber-physical attacks such as attack detection, prevention, impact analysis, and recovery plans. It will focus on DER integration on rural utilities within the Texas power grid. Project title: A Clean Energy and Rural Electric Industry-focused University Cyber-Physical Security Center   
• The Florida International University (Miami, Florida) will explore the moving target defense (MTD) technique as a way to prevent cyber attacks by “hiding” the system from the adversary. This could be especially useful in systems with communications channels that can easily be rerouted or switched. Project title: Center for Agile and Intelligent Power Systems (CAIPS): Cybersecurity Research, Development, and Workforce Training   

In addition to the research projects, the centers will also host a collection of cybersecurity education programs to equip energy professionals with the knowledge to safeguard the energy sector’s critical infrastructure from cybersecurity threats. 

For more information about DOE’s efforts to secure and protect America’s energy sector, visit www.energy.gov/ceser .

Site Search

• About ARPA-E
• Team Directory
• ARPA-E History
• Annual Reports
• Budget Requests
• Apply For Funding
• Authorization
• View Active Programs
• Search Our Programs
• Search Individual Projects
• Interactive Project Map
• Exploratory Topics
• The SCALEUP Program
• OPEN Programs
• Project Guidance
• ARPA-E Technology-to-Market
• Technology Commercialization
• External Engagement Model
• Investor Updates
• ARPA-E News & Media
• Press Releases
• ARPA-E Disruptors
• Publications
• ARPA-E Events
• Energy Innovation Summit
• Careers at ARPA-E
• Job Opportunities
• Life at ARPA-E
• ARPA-E FAQs
• General Questions
• Current Funding Opportunities
• Closed Funding Opportunities

Press Release

ARPA-E Announces Innovation Agreement Outlining Vision for the Future of Electrified Airports at Technology Expo Hosted in San Antonio

Today, the U.S. Department of Energy (DOE) Advanced Research Projects Agency-Energy (ARPA-E), the City of San Antonio Aviation Department and City Public Service Board (CPS Energy), and the University of Texas at San Antonio (UTSA) signed a Memorandum of Understanding (MOU) outlining collective efforts to develop and promote technologies that include, but are not limited to, sustainable aviation, battery technologies and innovative battery storage solutions, enhanced electric vehicle (EV) charging, and power demand management technologies. This agreement marks the first time an international airport will work together with ARPA-E—DOE’s innovation arm—to accelerate the development and deployment of new energy technologies to decarbonize the aviation sector. ARPA-E Director Evelyn Wang, San Antonio Mayor Ron Nirenberg, UTSA President Dr. Taylor Eighmy, and CPS Energy Vice President of Customer Value Karma Nilsson were all present for the signing hosted at Stinson Municipal Airport in San Antonio. “We are excited at this opportunity to collaborate and showcase innovative energy technologies that could transform the future of aviation,” said ARPA-E Director Evelyn N. Wang. “Today’s MOU signing is a step in the right direction to ensuring that these innovative technologies are developed, built, and integrated in America. Our hope is that this partnership will lay the groundwork to enable future electrified airports.” “We are proud to be a part of this innovative initiative that will ultimately benefit the San Antonio community,” said Rudy D. Garza, President and CEO of CPS Energy. “CPS Energy continues to look for ways to participate in electrification projects, especially for critical public infrastructure like the San Antonio International Airport. Projects like these furthers our commitment to finding new and sustainable technologies to enable our growing community and we are excited about the opportunity to work with our community partners to do so.” “This is an important agreement with the potential to shape the aviation industry of the future,” said San Antonio Mayor Ron Nirenberg.  “Researching the decarbonization of aviation and finding new sustainable energy models is important work, and I am proud San Antonio will be playing a leading role in this cutting-edge research.” “This is a unique partnership designed to promote transformative energy technologies and it propels the City of San Antonio’s Aviation Department to the center of innovation,” said Jesus Saenz, Director of Airports, City of San Antonio Aviation Department. “This is an exciting time to be part of the Aviation Team and planning for the future of aviation and our airports.” “This collaborative effort is an incredible opportunity for UTSA to partner with strategic industry leaders in evaluating electric aircraft, advanced energy storage and micro-grid systems to advance the adoption of sustainable multi-modal transportation technologies,” said UTSA President Taylor Eighmy. “Together, this collective will accelerate discoveries that will positively impact the local and regional economies while advancing technologies that change the world.”

To mark this historic milestone, the following ARPA-E-funded project teams were also present to showcase their technologies and share how their innovations could be integrated into future electrified airports:

• Ampaire , who is setting new standards for sustainable air travel and eco-friendly transportation solutions, flew its cutting-edge hybrid electric EEL aircraft and  watch video of the aircraft here ;
• Imagen Energy showcased ultrafast, compact electric vehicle chargers delivering efficient and cost-effective power solutions;
• Natron Energy featured sodium-ion batteries that can safely store energy and efficiently deliver power on demand;
• AutoGrid discussed a distributed energy resource management system that can help grid operators manage energy supply and demand fluctuations; 
• Quidnet Energy brought a wellhead to illustrate a modular geomechanical pumped storage systems that can utilize existing natural resources to store renewable energy over long durations; and
• Texas A&M University Research Team  presented 3D-printed models of a motor and shared concepts for advancing efficiency in electric transportation. 

UTSA and CPS Energy also presented research to leverage a city-scale grid digital twin to evaluate operational efficacy, ensure seamless interoperability, fortify cybersecurity protocols, and assess performance metrics of electric/hybrid aircrafts.

The MOU signed today will enable collaboration to identify research, development, demonstration, and deployment opportunities that will promote sustainable aviation technologies.

# # # 

Press and General Inquiries: 202-287-5440 [email protected]

We've detected unusual activity from your computer network

To continue, please click the box below to let us know you're not a robot.

Why did this happen?

Please make sure your browser supports JavaScript and cookies and that you are not blocking them from loading. For more information you can review our Terms of Service and Cookie Policy .

For inquiries related to this message please contact our support team and provide the reference ID below.

Contribute to NASA Research on Eclipse Day – and Every Day

NASA is celebrating the Sun during the Heliophysics Big Year , which extends through the end of 2024. You can get involved to help us learn more about our star and its influence on our planet. With exciting experiments happening during the total solar eclipse that will cross North America on April 8, to widespread investigations going on throughout the year, keep reading to find a project that's right for you.

What Is Citizen Science (Also Called Participatory Science)?

NASA defines citizen science as “a form of open collaboration in which individuals or organizations participate in the scientific process in various ways” from collecting and analyzing data to making discoveries and solving problems. ”Citizen” here refers to citizens of planet Earth, and these projects are open to everyone, regardless of country of birth or legal citizenship status.

NASA sponsors citizen science projects across all five areas of research that it pursues: Earth science, planetary science, astrophysics, biological and physical sciences, and heliophysics. And yes, there are a few projects that are focused on the April 8 solar eclipse!

What You Can Do

Depending which project you join, you might:

• Observe and record in pictures or words natural phenomena like clouds, animal noises, or a solar eclipse.
• Learn how to recognize or classify patterns in data or pictures of a comet or solar jet.
• Learn how to build and use scientific equipment like radio telescopes or ham radios.

Your contribution may be a large or small piece of the picture, but what you do as part of a NASA citizen science project is essential to answering the research question or need that the project addresses. And while you’re contributing to science, you might also develop new skills and make friends. You can read about some project participants – and what motivates them – in these profiles .

The Projects

NASA citizen science projects related to the April 8, 2024, eclipse and solar science are presented in four groups below. You can see all NASA citizen science projects on this website .

Use the tables below to find the project for you! A few notes:

• “ Minimum time required ” refers to how much time it would take you to get up to speed from the start.
• “ Where ” refers to where you need to be in order to participate.

Are you an educator looking for ways to involve your formal or informal students in eclipse-related science? Check out this companion blog post for some tips for educators.

Eclipse Projects That Need You on April 8!

Quick-start projects that require no special equipment, more demanding projects that require special equipment, heliophysics projects that you can do anytime, quick-start projects, no special equipment required, advanced participation.

Many NASA citizen science projects start out with a straightforward, structured task, but that doesn’t have to be where your contributions end. Some projects offer webinars or host regular video conference calls where enthusiastic volunteers can learn about and participate in the work that comes after data collection or classification. Hundreds of volunteers have become involved in deep ways. Over 450 volunteers have even been recognized for their contributions by being named as co-authors of scientific papers, which are the formal way in which scientists announce new discoveries and ideas.

By Sarah Kirn Citizen Science Strategist, NASA, at the Gulf of Maine Research Institute

Related Terms

• 2024 Solar Eclipse
• Citizen Science
• Skywatching
• Solar Eclipses

Explore More

Harnessing the 2024 Eclipse for Ionospheric Discovery with HamSCI

Scientists Pursue the Total Solar Eclipse with NASA Jet Planes

NASA Partnerships Bring 2024 Total Solar Eclipse to Everyone

On Monday, April 8, NASA and its partners will celebrate the wonders of the total solar eclipse as it passes over North America, with the path of totality in the United States, from Kerrville, Texas, to Houlton, Maine.