meaning of assignment of contract

Assignment of Contract

Jump to section, what is an assignment of contract.

An assignment of contract is a legal term that describes the process that occurs when the original party (assignor) transfers their rights and obligations under their contract to a third party (assignee). When an assignment of contract happens, the original party is relieved of their contractual duties, and their role is replaced by the approved incoming party.

How Does Assignment of Contract Work?

An assignment of contract is simpler than you might think.

The process starts with an existing contract party who wishes to transfer their contractual obligations to a new party.

When this occurs, the existing contract party must first confirm that an assignment of contract is permissible under the legally binding agreement . Some contracts prohibit assignments of contract altogether, and some require the other parties of the agreement to agree to the transfer. However, the general rule is that contracts are freely assignable unless there is an explicit provision that says otherwise.

In other cases, some contracts allow an assignment of contract without any formal notification to other contract parties. If this is the case, once the existing contract party decides to reassign his duties, he must create a “Letter of Assignment ” to notify any other contract signers of the change.

The Letter of Assignment must include details about who is to take over the contractual obligations of the exiting party and when the transfer will take place. If the assignment is valid, the assignor is not required to obtain the consent or signature of the other parties to the original contract for the valid assignment to take place.

Check out this article to learn more about how assigning a contract works.

Contract Assignment Examples

Contract assignments are great tools for contract parties to use when they wish to transfer their commitments to a third party. Here are some examples of contract assignments to help you better understand them:

Anna signs a contract with a local trash company that entitles her to have her trash picked up twice a week. A year later, the trash company transferred her contract to a new trash service provider. This contract assignment effectively makes Anna’s contract now with the new service provider.

Hasina enters a contract with a national phone company for cell phone service. The company goes into bankruptcy and needs to close its doors but decides to transfer all current contracts to another provider who agrees to honor the same rates and level of service. The contract assignment is completed, and Hasina now has a contract with the new phone company as a result.

Here is an article where you can find out more about contract assignments.

Benjamin W.

Assignment of Contract in Real Estate

Assignment of contract is also used in real estate to make money without going the well-known routes of buying and flipping houses. When real estate LLC investors use an assignment of contract, they can make money off properties without ever actually buying them by instead opting to transfer real estate contracts .

This process is called real estate wholesaling.

Real Estate Wholesaling

Real estate wholesaling consists of locating deals on houses that you don’t plan to buy but instead plan to enter a contract to reassign the house to another buyer and pocket the profit.

The process is simple: real estate wholesalers negotiate purchase contracts with sellers. Then, they present these contracts to buyers who pay them an assignment fee for transferring the contract.

This process works because a real estate purchase agreement does not come with the obligation to buy a property. Instead, it sets forth certain purchasing parameters that must be fulfilled by the buyer of the property. In a nutshell, whoever signs the purchase contract has the right to buy the property, but those rights can usually be transferred by means of an assignment of contract.

This means that as long as the buyer who’s involved in the assignment of contract agrees with the purchasing terms, they can legally take over the contract.

But how do real estate wholesalers find these properties?

It is easier than you might think. Here are a few examples of ways that wholesalers find cheap houses to turn a profit on:

• Direct mailers
• Place newspaper ads
• Make posts in online forums
• Social media posts

The key to finding the perfect home for an assignment of contract is to locate sellers that are looking to get rid of their properties quickly. This might be a family who is looking to relocate for a job opportunity or someone who needs to make repairs on a home but can’t afford it. Either way, the quicker the wholesaler can close the deal, the better.

Once a property is located, wholesalers immediately go to work getting the details ironed out about how the sale will work. Transparency is key when it comes to wholesaling. This means that when a wholesaler intends to use an assignment of contract to transfer the rights to another person, they are always upfront about during the preliminary phases of the sale.

In addition to this practice just being good business, it makes sure the process goes as smoothly as possible later down the line. Wholesalers are clear in their intent and make sure buyers know that the contract could be transferred to another buyer before the closing date arrives.

After their offer is accepted and warranties are determined, wholesalers move to complete a title search . Title searches ensure that sellers have the right to enter into a purchase agreement on the property. They do this by searching for any outstanding tax payments, liens , or other roadblocks that could prevent the sale from going through.

Wholesalers also often work with experienced real estate lawyers who ensure that all of the legal paperwork is forthcoming and will stand up in court. Lawyers can also assist in the contract negotiation process if needed but often don’t come in until the final stages.

If the title search comes back clear and the real estate lawyer gives the green light, the wholesaler will immediately move to locate an entity to transfer the rights to buy.

One of the most attractive advantages of real estate wholesaling is that very little money is needed to get started. The process of finding a seller, negotiating a price, and performing a title search is an extremely cheap process that almost anyone can do.

On the other hand, it is not always a positive experience. It can be hard for wholesalers to find sellers who will agree to sell their homes for less than the market value. Even when they do, there is always a chance that the transferred buyer will back out of the sale, which leaves wholesalers obligated to either purchase the property themselves or scramble to find a new person to complete an assignment of contract with.

Learn more about assignment of contract in real estate by checking out this article .

Who Handles Assignment of Contract?

The best person to handle an assignment of contract is an attorney. Since these are detailed legal documents that deal with thousands of dollars, it is never a bad idea to have a professional on your side. If you need help with an assignment of contract or signing a business contract , post a project on ContractsCounsel. There, you can connect with attorneys who know everything there is to know about assignment of contract amendment and can walk you through the whole process.

ContractsCounsel is not a law firm, and this post should not be considered and does not contain legal advice. To ensure the information and advice in this post are correct, sufficient, and appropriate for your situation, please consult a licensed attorney. Also, using or accessing ContractsCounsel's site does not create an attorney-client relationship between you and ContractsCounsel.

Meet some of our Lawyers

Rhea de Aenlle is a business-savvy attorney with extensive experience in Privacy & Data Security (CIPP/US, CIPP/E), GDPR, CCPA, HIPAA, FERPA, Intellectual Property, and Commercial Contracts. She has over 25 years of legal experience as an in-house counsel, AM Law 100 firm associate, and a solo practice attorney. Rhea works with start-up and midsize technology companies.

I began my career at "big law" firms, worked in-house for 14 years, and now have my own practice, providing big law quality at small firm rates. My practice focuses on strategic and commercial transactions, including M&A, preferred stock and common stock offerings, asset purchases and sales, joint ventures and strategic partnerships, stock option plans, master services agreements and SOWs, software development and license agreements, SaaS agreements, NDAs, employment and consulting agreements. I also manage corporate governance, advise boards and executives, and act as outside general counsel. I represent clients across the country and around the world.

Ryan Duffy is a skilled attorney with extensive experience in business law and estate planning. He received his undergraduate degree in Business from Franklin & Marshall College and went on to graduate from Villanova University Charles Widger School of Law. Ryan has worked with numerous clients on matters ranging from business formation and contract drafting to estate planning and asset protection. He is dedicated to helping businesses of all sizes achieve their goals while minimizing legal risks. He also works closely with individuals and families to help them protect their assets and plan for the future. With his extensive knowledge and practical approach, Ryan can provide valuable legal guidance and support to clients in need of business law and estate planning services.

Benjamin S.

Benjamin Snipes (JD/MBA/LLM) has 20 years of experience advising clients and drafting contracts in business and commercial matters.

Experienced Attorney with a demonstrated history of working in the law practice industry. Skilled in Preparation of Wills, Trial Practice, Estate Administration, Trusts, and Estate Planning. Strong legal professional with a Juris Doctorate focused in Law from Howard University School of Law.

Karen V. Mills is the founding member of the woman-owned boutique law firm Mills Law, LLC, based in Atlanta, Georgia, specializing in contracts, corporate transactional and business law.

Business Venture Law: Andrew Moore, Esq. focuses on solving modern business problems with common sense at affordable rates.

Find the best lawyer for your project

Quick, user friendly and one of the better ways I've come across to get ahold of lawyers willing to take new clients.

Need help with a Contract Agreement?

Post Your Project

Get Free Bids to Compare

Hire Your Lawyer

CONTRACT LAWYERS BY TOP CITIES

• Austin Contracts Lawyers
• Boston Contracts Lawyers
• Chicago Contracts Lawyers
• Dallas Contracts Lawyers
• Denver Contracts Lawyers
• Houston Contracts Lawyers
• Los Angeles Contracts Lawyers
• New York Contracts Lawyers
• Phoenix Contracts Lawyers
• San Diego Contracts Lawyers
• Tampa Contracts Lawyers

ASSIGNMENT OF CONTRACT LAWYERS BY CITY

• Austin Assignment Of Contract Lawyers
• Boston Assignment Of Contract Lawyers
• Chicago Assignment Of Contract Lawyers
• Dallas Assignment Of Contract Lawyers
• Denver Assignment Of Contract Lawyers
• Houston Assignment Of Contract Lawyers
• Los Angeles Assignment Of Contract Lawyers
• New York Assignment Of Contract Lawyers
• Phoenix Assignment Of Contract Lawyers
• San Diego Assignment Of Contract Lawyers
• Tampa Assignment Of Contract Lawyers

Contracts Counsel was incredibly helpful and easy to use. I submitted a project for a lawyer's help within a day I had received over 6 proposals from qualified lawyers. I submitted a bid that works best for my business and we went forward with the project.

I never knew how difficult it was to obtain representation or a lawyer, and ContractsCounsel was EXACTLY the type of service I was hoping for when I was in a pinch. Working with their service was efficient, effective and made me feel in control. Thank you so much and should I ever need attorney services down the road, I'll certainly be a repeat customer.

I got 5 bids within 24h of posting my project. I choose the person who provided the most detailed and relevant intro letter, highlighting their experience relevant to my project. I am very satisfied with the outcome and quality of the two agreements that were produced, they actually far exceed my expectations.

How It Works

Want to speak to someone.

Get in touch below and we will schedule a time to connect!

Find lawyers and attorneys by city

• Search Search Please fill out this field.
• Building Your Business
• Operations & Success

What Is an Assignment of Contract?

Assignment of Contract Explained

Hero Images / Getty Images

Assignment of contract allows one person to assign, or transfer, their rights, obligations, or property to another. An assignment of contract clause is often included in contracts to give either party the opportunity to transfer their part of the contract to someone else in the future. Many assignment clauses require that both parties agree to the assignment.

Learn more about assignment of contract and how it works.

What Is Assignment of Contract?

Assignment of contract means the contract and the property, rights, or obligations within it can be assigned to another party. An assignment of contract clause can typically be found in a business contract. This type of clause is common in contracts with suppliers or vendors and in intellectual property (patent, trademark , and copyright) agreements.

How Does Assignment of Contract Work?

An assignment may be made to anyone, but it is typically made to a subsidiary or a successor. A subsidiary is a business owned by another business, while a successor is the business that follows a sale, acquisition, or merger.

Let’s suppose Ken owns a lawn mowing service and he has a contract with a real estate firm to mow at each of their offices every week in the summer. The contract includes an assignment clause, so when Ken goes out of business, he assigns the contract to his sister-in-law Karrie, who also owns a lawn mowing service.

Before you try to assign something in a contract, check the contract to make sure it's allowed, and notify the other party in the contract.

Assignment usually is included in a specific clause in a contract. It typically includes transfer of both accountability and responsibility to another party, but liability usually remains with the assignor (the person doing the assigning) unless there is language to the contrary.

What Does Assignment of Contract Cover?

Generally, just about anything of value in a contract can be assigned, unless there is a specific law or public policy disallowing the assignment.

Rights and obligations of specific people can’t be assigned because special skills and abilities can’t be transferred. This is called specific performance.   For example, Billy Joel wouldn't be able to transfer or assign a contract to perform at Madison Square Garden to someone else—they wouldn't have his special abilities.

Assignments won’t stand up in court if the assignment significantly changes the terms of the contract. For example, if Karrie’s business is tree trimming, not lawn mowing, the contract can’t be assigned to her.

Assigning Intellectual Property

Intellectual property (such as copyrights, patents, and trademarks) has value, and these assets are often assigned. The U.S. Patent and Trademark Office (USPTO) says patents are personal property and that patent rights can be assigned. Trademarks, too, can be assigned. The assignment must be registered with the USPTO's Electronic Trademark Assignment System (ETAS) .  

The U.S. Copyright Office doesn't keep a database of copyright assignments, but they will record the document if you follow their procedure.

Alternatives to Assignment of Contract

There are other types of transfers that may be functional alternatives to assignment.

Licensing is an agreement whereby one party leases the rights to use a piece of property (for example, intellectual property) from another. For instance, a business that owns a patent may license another company to make products using that patent.  

Delegation permits someone else to act on your behalf. For example, Ken’s lawn service might delegate Karrie to do mowing for him without assigning the entire contract to her. Ken would still receive the payment and control the work.

Do I Need an Assignment of Contract?

Assignment of contract can be a useful clause to include in a business agreement. The most common cases of assignment of contract in a business situation are:

• Assignment of a trademark, copyright, or patent
• Assignments to a successor company in the case of the sale of the business
• Assignment in a contract with a supplier or customer
• Assignment in an employment contract or work for hire agreement

Before you sign a contract, look to see if there is an assignment clause, and get the advice of an attorney if you want to assign something in a contract.

Key Takeaways

• Assignment of contract is the ability to transfer rights, property, or obligations to another.
• Assignment of contract is a clause often found in business contracts.
• A party may assign a contract to another party if the contract permits it and no law forbids it.

Legal Information Institute. " Assignment ." Accessed Jan. 2, 2021.

Legal Information Institute. " Specific Performance ." Accessed Jan. 2, 2021.

U.S. Patent and Trademark Office. " 301 Ownership/Assignability of Patents and Applications [R-10.2019] ." Accessed Jan. 2, 2021.

Licensing International. " What is Licensing ." Accessed Jan. 2, 2021.

Primary tabs

Assignment is a legal term whereby an individual, the “assignor,” transfers rights, property, or other benefits to another known as the “ assignee .”   This concept is used in both contract and property law.  The term can refer to either the act of transfer or the rights /property/benefits being transferred.

Contract Law   

Under contract law, assignment of a contract is both: (1) an assignment of rights; and (2) a delegation of duties , in the absence of evidence otherwise.  For example, if A contracts with B to teach B guitar for $50, A can assign this contract to C.  That is, this assignment is both: (1) an assignment of A’s rights under the contract to the $50; and (2) a delegation of A’s duty to teach guitar to C.  In this example, A is both the “assignor” and the “delegee” who d elegates the duties to another (C), C is known as the “ obligor ” who must perform the obligations to the assignee , and B is the “ assignee ” who is owed duties and is liable to the “ obligor ”.

(1) Assignment of Rights/Duties Under Contract Law

There are a few notable rules regarding assignments under contract law.  First, if an individual has not yet secured the contract to perform duties to another, he/she cannot assign his/her future right to an assignee .  That is, if A has not yet contracted with B to teach B guitar, A cannot assign his/her rights to C.  Second, rights cannot be assigned when they materially change the obligor ’s duty and rights.  Third, the obligor can sue the assignee directly if the assignee does not pay him/her.  Following the previous example, this means that C ( obligor ) can sue B ( assignee ) if C teaches guitar to B, but B does not pay C $50 in return.

            (2) Delegation of Duties

If the promised performance requires a rare genius or skill, then the delegee cannot delegate it to the obligor.  It can only be delegated if the promised performance is more commonplace.  Further, an obligee can sue if the assignee does not perform.  However, the delegee is secondarily liable unless there has been an express release of the delegee.  That is, if B does want C to teach guitar but C refuses to, then B can sue C.  If C still refuses to perform, then B can compel A to fulfill the duties under secondary liability.

Lastly, a related concept is novation , which is when a new obligor substitutes and releases an old obligor.  If novation occurs, then the original obligor’s duties are wiped out. However, novation requires an original obligee’s consent .  

Property Law

Under property law, assignment typically arises in landlord-tenant situations.  For example, A might be renting from landlord B but wants to another party (C) to take over the property.   In this scenario, A might be able to choose between assigning and subleasing the property to C.  If assigning , A would be giving C the entire balance of the term, with no reversion to anyone whereas if subleasing , A would be giving C for a limited period of the remaining term.  Significantly, under assignment C would have privity of estate with the landlord while under a sublease, C would not. 

[Last updated in May of 2020 by the Wex Definitions Team ]

• business law
• landlord & tenant
• property & real estate law
• trusts, inheritances & estates
• wex definitions

Understanding an assignment and assumption agreement

Need to assign your rights and duties under a contract? Learn more about the basics of an assignment and assumption agreement.

Get your assignment of agreement

by   Belle Wong, J.D.

Belle Wong, is a freelance writer specializing in small business, personal finance, banking, and tech/SAAS. She ...

Read more...

Updated on: November 24, 2023 · 3 min read

The assignment and assumption agreement

The basics of assignment and assumption, filling in the assignment and assumption agreement.

While every business should try its best to meet its contractual obligations, changes in circumstance can happen that could necessitate transferring your rights and duties under a contract to another party who would be better able to meet those obligations.

If you find yourself in such a situation, and your contract provides for the possibility of assignment, an assignment and assumption agreement can be a good option for preserving your relationship with the party you initially contracted with, while at the same time enabling you to pass on your contractual rights and duties to a third party.

An assignment and assumption agreement is used after a contract is signed, in order to transfer one of the contracting party's rights and obligations to a third party who was not originally a party to the contract. The party making the assignment is called the assignor, while the third party accepting the assignment is known as the assignee.

In order for an assignment and assumption agreement to be valid, the following criteria need to be met:

• The initial contract must provide for the possibility of assignment by one of the initial contracting parties.
• The assignor must agree to assign their rights and duties under the contract to the assignee.
• The assignee must agree to accept, or "assume," those contractual rights and duties.
• The other party to the initial contract must consent to the transfer of rights and obligations to the assignee.

A standard assignment and assumption contract is often a good starting point if you need to enter into an assignment and assumption agreement. However, for more complex situations, such as an assignment and amendment agreement in which several of the initial contract terms will be modified, or where only some, but not all, rights and duties will be assigned, it's a good idea to retain the services of an attorney who can help you draft an agreement that will meet all your needs.

When you're ready to enter into an assignment and assumption agreement, it's a good idea to have a firm grasp of the basics of assignment:

• First, carefully read and understand the assignment and assumption provision in the initial contract. Contracts vary widely in their language on this topic, and each contract will have specific criteria that must be met in order for a valid assignment of rights to take place.
• All parties to the agreement should carefully review the document to make sure they each know what they're agreeing to, and to help ensure that all important terms and conditions have been addressed in the agreement.
• Until the agreement is signed by all the parties involved, the assignor will still be obligated for all responsibilities stated in the initial contract. If you are the assignor, you need to ensure that you continue with business as usual until the assignment and assumption agreement has been properly executed.

Unless you're dealing with a complex assignment situation, working with a template often is a good way to begin drafting an assignment and assumption agreement that will meet your needs. Generally speaking, your agreement should include the following information:

• Identification of the existing agreement, including details such as the date it was signed and the parties involved, and the parties' rights to assign under this initial agreement
• The effective date of the assignment and assumption agreement
• Identification of the party making the assignment (the assignor), and a statement of their desire to assign their rights under the initial contract
• Identification of the third party accepting the assignment (the assignee), and a statement of their acceptance of the assignment
• Identification of the other initial party to the contract, and a statement of their consent to the assignment and assumption agreement
• A section stating that the initial contract is continued; meaning, that, other than the change to the parties involved, all terms and conditions in the original contract stay the same

In addition to these sections that are specific to an assignment and assumption agreement, your contract should also include standard contract language, such as clauses about indemnification, future amendments, and governing law.

Sometimes circumstances change, and as a business owner you may find yourself needing to assign your rights and duties under a contract to another party. A properly drafted assignment and assumption agreement can help you make the transfer smoothly while, at the same time, preserving the cordiality of your initial business relationship under the original contract.

You may also like

What does 'inc.' mean in a company name?

'Inc.' in a company name means the business is incorporated, but what does that entail, exactly? Here's everything you need to know about incorporating your business.

October 9, 2023 · 10min read

How to write a will: A comprehensive guide to will writing

Writing a will is one of the most important things you can do for yourself and for your loved ones, and it can be done in just minutes. Are you ready to get started?

May 17, 2024 · 11min read

How to Start an LLC in 7 Easy Steps (2024 Guide)

2024 is one of the best years ever to start an LLC, and you can create yours in only a few steps.

May 16, 2024 · 22min read

Assignment of Rights and Obligations Under a Contract: Everything You Need to Know

An assignment of rights and obligations under a contract occurs when a party assigns their contractual rights to a third party. 3 min read updated on January 01, 2024

Updated October 29, 2020:

An assignment of rights and obligations under a contract occurs when a party assigns their contractual rights to a third party. The benefit that the issuing party would have received from the contract is now assigned to the third party. The party appointing their rights is referred to as the assignor, while the party obtaining the rights is the assignee.

What Is an Assignment of Contract?

In an assignment contract, the assignor prefers that the assignee reverses roles and assumes the contractual rights and obligations as stated in the contract. Before this can occur, all parties to the original contract must be notified.

Contracts create duties and rights. An obligor is the party who is legally or contractually obliged to provide a benefit or payment to another, while an obligation is owed to the obligee. The obligee transfers a right to obtain a benefit owed by the obligor to a third party. At this point, the obligee becomes an assignor. An assignor is the party that actually creates an assignment. 

The party that creates an assignment is both the obligee and a transferor. The assignee receives the right to acquire the obligations of the promisor/obligor. The assignor can assign any right to the obligor unless:

• Doing so will materially alter the obligation
• It's materially burdening
• It decreases the value of the original contract
• It increases their risk
• Public policy or a statute makes it illegal
• The contract prevents assignment

Assignments are important in business financing, especially in factoring . A factor is someone who purchases a right to receive a benefit from someone else.

How Assignments Work

The specific language used in the contract will determine how the assignment plays out. For example, one contract may prohibit assignment, while another contract may require that all parties involved agree to it before proceeding. Remember, an assignment of contract does not necessarily alleviate an assignor from all liability. Many contracts include an assurance clause guaranteeing performance. In other words, the initial parties to the contract guarantee the assignee will achieve the desired goal.

When Assignments Will Not Be Enforced

The following situations indicate when an assignment of a contract is not enforced:

• The contract specifically prohibits assignment
• The assignment drastically changes the expected outcome
• The assignment is against public policy or illegal
• The contract contains a no-assignment clause
• The assignment is for a future right that only would be attainable in a contract in the future
• The contract hasn't been finalized or written yet

Delegation vs. Assignment

Occasionally, one party in a contract will desire to pass on or delegate their responsibility to a third party without creating an assignment contract. Some duties are so specific in nature they cannot be delegated. Adding a clause in the contract to prevent a party from delegating their responsibilities and duties is highly recommended.

Characteristics of Assignments

An assignment involves the transfer by an assignor of some or all of its rights to receive performance under the contract to an assignee. The assignee then receives all the benefits of the assigned rights. The assignment doesn't eliminate or reduce the assignor's performance commitments to the nonassigning party.

Three Steps to Follow if You Want to Assign a Contract

There are three main steps to take if you're looking to assign a contract:

• Make sure the current contract does not contain an anti-assignment clause
• Officially execute the assignment by transferring the parties' obligations and rights
• Notify the obligor of the changes made

Once the obligor is notified, the assignor will effectively be relieved of liability.

Anti-Assignment Clauses

If you'd prefer not to allow the party you're doing business with to assign a contract, you may be able to prevent this from occurring by clearly stating anti-assignment clauses in the original contract. The three most common anti-assignment clauses are:

• Consent required for assignment
• Consent not needed for new owners or affiliates
• Consent not unreasonably withheld

Based on these three clauses, no party in the contract is allowed to delegate or assign any obligations or rights without prior written consent from the other parties. Any delegation or assignment in violation of this passage shall be deemed void. It is not possible to write an anti-assignment clause that goes against an assignment that is issued or ordered by a court.

If you need help with an assignment of rights and obligations under a contract, you can  post your job  on UpCounsel's marketplace. UpCounsel accepts only the top 5 percent of lawyers to its site. Lawyers on UpCounsel come from law schools such as Harvard Law and Yale Law and average 14 years of legal experience, including work with or on behalf of companies like Google, Menlo Ventures, and Airbnb.

Hire the top business lawyers and save up to 60% on legal fees

Content Approved by UpCounsel

• Assignment Contract Law
• Legal Assignment
• Assignment Law
• Assignment of Rights Example
• What Is the Definition of Assigns
• Partial Assignment of Contract
• Assignment Of Contracts
• Consent to Assignment
• Delegation vs Assignment
• Assignment of Contract Rights

(404) 738-5471

Ultimate Checklist for Understanding Contract Assignment Rules

• February 28, 2024
• Moton Legal Group

In contracts, understanding assignment is key. Simply put, an assignment in contract law is when one party (the assignor) transfers their rights and responsibilities under a contract to another party (the assignee). This can include anything from leasing agreements to business operations. But why is this important? It’s because it allows for flexibility in business and personal dealings, a critical component in our world.

Here’s a quick rundown: – Contract Basics: The foundational agreements between parties. – Assignment Importance: Allowing the transfer of obligations and benefits to keep up with life’s changes.

Contracts are a staple in both personal and business worlds, acting as the backbone to many transactions and agreements encountered daily. Understanding the nuances, like assignments, can empower you to navigate these waters with confidence and ease. Whether you’re a business owner in the Southeast looking to expand or an individual managing personal agreements, grasp these basics, and you’re on the right path.

Understanding Contract Assignment

Contract Assignment sounds complicated, right? But, let’s break it down into simple terms. In contracts and legal agreements, knowing about assignment can save you a lot of headaches down the road. Whether you’re a business owner, a landlord, or just someone who deals with contracts, this is for you.

Legal Definition

At its core, contract assignment is about transferring rights or obligations under a contract from one party to another. Think of it as passing a baton in a relay race. The original party (the assignor) hands off their responsibilities or benefits to someone else (the assignee). But, there’s a twist – the race keeps going with the new runner without starting over.

Contract Law

In contract law, assignment comes into play in various ways. For example, if you’re a freelancer and you’ve agreed to complete a project but suddenly find yourself overbooked, you might assign that contract to another freelancer. This way, the job gets done, and your client is happy. However, not all contracts can be freely assigned. Some require the other party’s consent, and others can’t be assigned at all, especially if they involve personal skills or confidential trust.

Property Law

When it comes to property law, assignment often surfaces in landlord-tenant relationships. Say you’re renting a shop for your business, but you decide to move. If your lease allows it, you might assign your lease to another business. This means they take over your lease, stepping into your shoes, with all the rights and obligations that come with it.

The concept might seem straightforward, but there are important legal requirements and potential pitfalls to be aware of. For instance, an assignment could be prohibited by the contract itself, or it may significantly change the original deal’s terms in a way that’s not allowed. Plus, when you’re dealing with something that requires a unique skill set, like an artist or a consultant, those services typically can’t be passed on to someone else without agreement from all parties involved.

To navigate these complexities, understanding the fundamentals of assignment in contract law and property law is crucial. It ensures that when you’re ready to pass that baton, you’re doing it in a way that’s legal, effective, and doesn’t leave you tripping up before you reach the finish line.

The goal here is to make sure everyone involved understands what’s happening and agrees to it. That way, assignments can be a useful tool to manage your contracts and property agreements, keeping things moving smoothly even when changes come up.

For more detailed exploration on this topic, consider checking the comprehensive guide on Assignment (law)). This resource dives deeper into the nuances of contract assignment, offering insights and examples that can help clarify this complex area of law.

By grasping these basics, you’re well on your way to mastering the art of contract assignment. Whether you’re dealing with leases, business deals, or any agreement in between, knowing how to effectively assign a contract can be a game-changer.

Key Differences Between Assignment and Novation

When diving into contracts, two terms that often cause confusion are assignment and novation . While both deal with transferring obligations and rights under a contract, they are fundamentally different in several key aspects. Understanding these differences is crucial for anyone involved in contract management or negotiation.

Rights Transfer

Assignment involves the transfer of benefits or rights from one party (the assignor) to another (the assignee). However, it’s important to note that only the benefits of the contract can be assigned, not the burdens. For instance, if someone has the right to receive payments under a contract, they can assign this right to someone else.

Novation , on the other hand, is more comprehensive. It involves transferring both the rights and obligations under a contract from one party to a new party. With novation, the original party is completely released from the contract, and a new contractual relationship is formed between the remaining and the new party. This is a key distinction because, in novation, all parties must agree to this new arrangement.

Obligations Transfer

Assignment doesn’t transfer the original party’s obligations under the contract. The assignor (the original party who had the rights under the contract) might still be liable if the assignee fails to fulfill the contract terms.

In contrast, novation transfers all obligations to the new party. Once a novation is complete, the new party takes over all rights and obligations, leaving the original party with no further legal liabilities or rights under the contract.

Written Agreement

While assignments can sometimes be informal or even verbal, novation almost always requires a written agreement. This is because novation affects more parties’ rights and obligations and has a more significant impact on the contractual relationship. A written agreement ensures that all parties are clear about the terms of the novation and their respective responsibilities.

In practice, the need for a written agreement in novation serves as a protection for all parties involved. It ensures that the transfer of obligations is clearly documented and legally enforceable.

For example, let’s say Alex agrees to paint Bailey’s house for $1,000. Later, Alex decides they can’t complete the job and wants Chris to take over. If Bailey agrees, they can sign a novation agreement where Chris agrees to paint the house under the same conditions. Alex is then relieved from the original contract, and Chris becomes responsible for completing the painting job.

Understanding the difference between assignment and novation is critical for anyone dealing with contracts. While both processes allow for the transfer of rights or obligations, they do so in different ways and with varying implications for all parties involved. Knowing when and how to use each can help ensure that your contractual relationships are managed effectively and legally sound.

For further in-depth information and real-life case examples on assignment in contract law, you can explore detailed resources such as Assignment (law) on Wikipedia).

Next, we’ll delve into the legal requirements for a valid assignment, touching on express prohibition, material change, future rights, and the rare skill requirement. Understanding these will further equip you to navigate the complexities of contract assignments successfully.

Legal Requirements for a Valid Assignment

When dealing with assignment in contract law , it’s crucial to understand the legal backbone that supports a valid assignment. This ensures that the assignment stands up in a court of law if disputes arise. Let’s break down the must-know legal requirements: express prohibition, material change, future rights, and rare skill requirement.

Express Prohibition

The first stop on our checklist is to look for an express prohibition against assignment in the contract. This is a clause that outright states assignments are not allowed without the other party’s consent. If such language exists and you proceed with an assignment, you could be breaching the contract. Always read the fine print or have a legal expert review the contract for you.

Material Change

Next up is the material change requirement. The law states that an assignment cannot significantly alter the duties, increase the burdens, or impair the chances of the other party receiving due performance under the contract. For instance, if the contract involves personal services tailored to the specific party, assigning it to someone else might change the expected outcome, making such an assignment invalid.

Future Rights

Another important aspect is future rights . The rule here is straightforward: you can’t assign what you don’t have. This means that a promise to assign rights you may acquire in the future is generally not enforceable at present. An effective assignment requires that the rights exist at the time of the assignment.

Rare Skill Requirement

Lastly, let’s talk about the rare skill requirement . Some contracts are so specialized that they cannot be assigned to another party without compromising the contract’s integrity. This is often the case with contracts that rely on an individual’s unique skills or trust. Think of an artist commissioned for a portrait or a lawyer hired for their specialized legal expertise. In these scenarios, assignments are not feasible as they could severely impact the contract’s intended outcome.

Understanding these legal requirements is pivotal for navigating the complexities of assignment in contract law. By ensuring compliance with these principles, you can effectively manage contract assignments, safeguarding your interests and those of the other contracting party.

For anyone looking to delve deeper into the intricacies of contract law, you can explore detailed resources such as Assignment (law) on Wikipedia).

Moving forward, we’ll explore the common types of contract assignments, from landlord-tenant agreements to business contracts and intellectual property transfers. This will give you a clearer picture of how assignments work across different legal landscapes.

Common Types of Contract Assignments

When we dive into assignment in contract law , we find it touches nearly every aspect of our business and personal lives. Let’s simplify this complex topic by looking at some of the most common types of contract assignments you might encounter.

Landlord-Tenant Agreements

Imagine you’re renting a fantastic apartment but have to move because of a new job. Instead of breaking your lease, you can assign your lease to someone else. This means the new tenant takes over your lease, including rent payments and maintenance responsibilities. However, it’s crucial that the landlord agrees to this switch. If done right, it’s a win-win for everyone involved.

Business Contracts

In the business world, contract assignments are a daily occurrence. For example, if a company agrees to provide services but then realizes it’s overbooked, it can assign the contract to another company that can fulfill the obligations. This way, the project is completed on time, and the client remains happy. It’s a common practice that ensures flexibility and efficiency in business operations.

Intellectual Property

Intellectual property (IP) assignments are fascinating and complex. If an inventor creates a new product, they can assign their patent rights to a company in exchange for a lump sum or royalties. This transfer allows the company to produce and sell the invention, while the inventor benefits financially. However, it’s critical to note that with trademarks, the goodwill associated with the mark must also be transferred to maintain its value.

Understanding these types of assignments helps clarify the vast landscape of contract law. Whether it’s a cozy apartment, a crucial business deal, or a groundbreaking invention, assignments play a pivotal role in ensuring these transitions happen smoothly.

As we navigate through the realm of contract assignments, each type has its own set of rules and best practices. The key is to ensure all parties are on the same page and that the assignment is executed properly to avoid any legal pitfalls.

Diving deeper into the subject, next, we will explore how to execute a contract assignment effectively, ensuring all legal requirements are met and the process runs as smoothly as possible.

How to Execute a Contract Assignment Effectively

Executing a contract assignment effectively is crucial to ensure that all legal requirements are met and the process runs smoothly. Here’s a straightforward guide to help you navigate this process without any hiccups.

Written Consent

First and foremost, get written consent . This might seem like a no-brainer, but it’s surprising how often this step is overlooked. If the original contract requires the consent of the other party for an assignment to be valid, make sure you have this in black and white. Not just a handshake or a verbal agreement. This ensures clarity and avoids any ambiguity or disputes down the line.

Notice of Assignment

Next up, provide a notice of assignment to all relevant parties. This is not just common courtesy; it’s often a legal requirement. It informs all parties involved about the change in the assignment of rights or obligations under the contract. Think of it as updating your address with the post office; everyone needs to know where to send the mail now.

Privity of Estate

Understanding privity of estate is key in real estate transactions and leases. It refers to the legal relationship that exists between parties under a contract. When you assign a contract, the assignee steps into your shoes, but the original terms of the contract still apply. This means the assignee needs to be aware of and comply with the original agreement’s requirements.

Secondary Liability

Lastly, let’s talk about secondary liability . Just because you’ve assigned a contract doesn’t always mean you’re off the hook. In some cases, the original party (the assignor) may still hold some liability if the assignee fails to perform under the contract. It’s essential to understand the terms of your assignment agreement and whether it includes a release from liability for the assignor.

Executing a contract assignment effectively is all about dotting the I’s and crossing the T’s . By following these steps—securing written consent, issuing a notice of assignment, understanding privity of estate, and clarifying secondary liability—you’re setting yourself up for a seamless transition.

The goal is to ensure all parties are fully informed and agreeable to the changes being made. This not only helps in maintaining good relationships but also in avoiding potential legal issues down the line.

We’ll dive into some of the frequently asked questions about contract assignment to clear any lingering doubts.

Frequently Asked Questions about Contract Assignment

When navigating contracts, questions often arise, particularly about the concepts of assignment and novation. Let’s break these down into simpler terms.

What does assignment of a contract mean?

In the realm of assignment in contract law , think of assignment as passing the baton in a relay race. It’s where one party (the assignor) transfers their rights and benefits under a contract to another party (the assignee). However, unlike a relay race, the original party might still be on the hook for obligations unless the contract says otherwise. It’s like handing off the baton but still running alongside the new runner just in case.

Is an assignment legally binding?

Absolutely, an assignment is as binding as a pinky promise in the playground – but with legal muscle behind it. Once an assignment meets the necessary legal criteria (like not significantly changing the obligor’s duties or having express consent if required), it’s set in stone. This means both the assignee and the assignor must honor this transfer of rights or face potential legal actions. It’s a serious commitment, not just a casual exchange.

What is the difference between assignment and novation?

Now, this is where it gets a bit more intricate. If assignment is passing the baton, novation is forming a new team mid-race. It involves replacing an old obligation with a new one or adding a new party to take over an old one’s duties. Crucially, novation extinguishes the old contract and requires all original and new parties to agree. It’s a clean slate – the original party walks away, and the new party steps in, no strings attached.

While both assignment and novation change the playing field of a contract, novation requires a unanimous thumbs up from everyone involved, completely freeing the original party from their obligations. On the other hand, an assignment might leave the original party watching from the sidelines, ready to jump back in if needed.

Understanding these facets of assignment in contract law is crucial, whether you’re diving into a new agreement or navigating an existing one. Knowledge is power – especially when it comes to contracts.

As we wrap up these FAQs, the legal world of contracts is vast and sometimes complex, but breaking it down into bite-sized pieces can help demystify the process and empower you in your legal undertakings.

Here’s a helpful resource for further reading on the difference between assignment and cession.

Now, let’s continue on to the conclusion to tie all these insights together.

Navigating assignment in contract law can seem like a daunting task at first glance. However, with the right information and guidance, it becomes an invaluable tool in ensuring that your rights and obligations are protected and effectively managed in any contractual relationship.

At Moton Legal Group, we understand the intricacies of contract law and are dedicated to providing you with the expertise and support you need to navigate these waters. Whether you’re dealing with a straightforward contract assignment or facing more complex legal challenges, our team is here to help. We pride ourselves on our ability to demystify legal processes and make them accessible to everyone.

The key to successfully managing any contract assignment lies in understanding your rights, the obligations involved, and the potential impacts on all parties. It’s about ensuring that the assignment is executed in a way that is legally sound and aligns with your interests.

If you’re in need of assistance with a contract review, looking to understand more about how contract assignments work, or simply seeking legal advice on your contractual rights and responsibilities, Moton Legal Group is here for you. Our team of experienced attorneys is committed to providing the clarity, insight, and support you need to navigate the complexities of contract law with confidence.

For more information on how we can assist you with your contract review and other legal needs, visit our contract review service page .

In the constantly evolving landscape of contract law, having a trusted legal partner can make all the difference. Let Moton Legal Group be your guide, ensuring that your contractual dealings are handled with the utmost care, professionalism, and expertise. Together, we can navigate the complexities of contract law and secure the best possible outcomes for your legal matters.

Thank you for joining us on this journey through the fundamentals of assignment in contract law. We hope you found this information helpful and feel more empowered to handle your contractual affairs with confidence.

For more information Call :

Reach out now.

" * " indicates required fields

Recent Blog Posts:

Understanding Rescission in Contract Law: A Detailed Guide

Understanding Privity in Contract Law: A Beginner’s Guide

Beginner’s Guide to Offer and Acceptance in Contract Law

Understanding Mutual Assent in Contract Law: A Comprehensive Guide

Understanding Capacity in Contract Law: A Comprehensive Guide

Understanding Verbal Contract Law: A Step-by-Step Guide

• assignments basic law

Assignments: The Basic Law

The assignment of a right or obligation is a common contractual event under the law and the right to assign (or prohibition against assignments) is found in the majority of agreements, leases and business structural documents created in the United States.

As with many terms commonly used, people are familiar with the term but often are not aware or fully aware of what the terms entail. The concept of assignment of rights and obligations is one of those simple concepts with wide ranging ramifications in the contractual and business context and the law imposes severe restrictions on the validity and effect of assignment in many instances. Clear contractual provisions concerning assignments and rights should be in every document and structure created and this article will outline why such drafting is essential for the creation of appropriate and effective contracts and structures.

The reader should first read the article on Limited Liability Entities in the United States and Contracts since the information in those articles will be assumed in this article.

Basic Definitions and Concepts:

An assignment is the transfer of rights held by one party called the “assignor” to another party called the “assignee.” The legal nature of the assignment and the contractual terms of the agreement between the parties determines some additional rights and liabilities that accompany the assignment. The assignment of rights under a contract usually completely transfers the rights to the assignee to receive the benefits accruing under the contract. Ordinarily, the term assignment is limited to the transfer of rights that are intangible, like contractual rights and rights connected with property. Merchants Service Co. v. Small Claims Court , 35 Cal. 2d 109, 113-114 (Cal. 1950).

An assignment will generally be permitted under the law unless there is an express prohibition against assignment in the underlying contract or lease. Where assignments are permitted, the assignor need not consult the other party to the contract but may merely assign the rights at that time. However, an assignment cannot have any adverse effect on the duties of the other party to the contract, nor can it diminish the chance of the other party receiving complete performance. The assignor normally remains liable unless there is an agreement to the contrary by the other party to the contract.

The effect of a valid assignment is to remove privity between the assignor and the obligor and create privity between the obligor and the assignee. Privity is usually defined as a direct and immediate contractual relationship. See Merchants case above.

Further, for the assignment to be effective in most jurisdictions, it must occur in the present. One does not normally assign a future right; the assignment vests immediate rights and obligations.

No specific language is required to create an assignment so long as the assignor makes clear his/her intent to assign identified contractual rights to the assignee. Since expensive litigation can erupt from ambiguous or vague language, obtaining the correct verbiage is vital. An agreement must manifest the intent to transfer rights and can either be oral or in writing and the rights assigned must be certain.

Note that an assignment of an interest is the transfer of some identifiable property, claim, or right from the assignor to the assignee. The assignment operates to transfer to the assignee all of the rights, title, or interest of the assignor in the thing assigned. A transfer of all rights, title, and interests conveys everything that the assignor owned in the thing assigned and the assignee stands in the shoes of the assignor. Knott v. McDonald’s Corp ., 985 F. Supp. 1222 (N.D. Cal. 1997)

The parties must intend to effectuate an assignment at the time of the transfer, although no particular language or procedure is necessary. As long ago as the case of National Reserve Co. v. Metropolitan Trust Co ., 17 Cal. 2d 827 (Cal. 1941), the court held that in determining what rights or interests pass under an assignment, the intention of the parties as manifested in the instrument is controlling.

The intent of the parties to an assignment is a question of fact to be derived not only from the instrument executed by the parties but also from the surrounding circumstances. When there is no writing to evidence the intention to transfer some identifiable property, claim, or right, it is necessary to scrutinize the surrounding circumstances and parties’ acts to ascertain their intentions. Strosberg v. Brauvin Realty Servs., 295 Ill. App. 3d 17 (Ill. App. Ct. 1st Dist. 1998)

The general rule applicable to assignments of choses in action is that an assignment, unless there is a contract to the contrary, carries with it all securities held by the assignor as collateral to the claim and all rights incidental thereto and vests in the assignee the equitable title to such collateral securities and incidental rights. An unqualified assignment of a contract or chose in action, however, with no indication of the intent of the parties, vests in the assignee the assigned contract or chose and all rights and remedies incidental thereto.

More examples: In Strosberg v. Brauvin Realty Servs ., 295 Ill. App. 3d 17 (Ill. App. Ct. 1st Dist. 1998), the court held that the assignee of a party to a subordination agreement is entitled to the benefits and is subject to the burdens of the agreement. In Florida E. C. R. Co. v. Eno , 99 Fla. 887 (Fla. 1930), the court held that the mere assignment of all sums due in and of itself creates no different or other liability of the owner to the assignee than that which existed from the owner to the assignor.

And note that even though an assignment vests in the assignee all rights, remedies, and contingent benefits which are incidental to the thing assigned, those which are personal to the assignor and for his sole benefit are not assigned. Rasp v. Hidden Valley Lake, Inc ., 519 N.E.2d 153, 158 (Ind. Ct. App. 1988). Thus, if the underlying agreement provides that a service can only be provided to X, X cannot assign that right to Y.

Novation Compared to Assignment:

Although the difference between a novation and an assignment may appear narrow, it is an essential one. “Novation is a act whereby one party transfers all its obligations and benefits under a contract to a third party.” In a novation, a third party successfully substitutes the original party as a party to the contract. “When a contract is novated, the other contracting party must be left in the same position he was in prior to the novation being made.”

A sublease is the transfer when a tenant retains some right of reentry onto the leased premises. However, if the tenant transfers the entire leasehold estate, retaining no right of reentry or other reversionary interest, then the transfer is an assignment. The assignor is normally also removed from liability to the landlord only if the landlord consents or allowed that right in the lease. In a sublease, the original tenant is not released from the obligations of the original lease.

Equitable Assignments:

An equitable assignment is one in which one has a future interest and is not valid at law but valid in a court of equity. In National Bank of Republic v. United Sec. Life Ins. & Trust Co. , 17 App. D.C. 112 (D.C. Cir. 1900), the court held that to constitute an equitable assignment of a chose in action, the following has to occur generally: anything said written or done, in pursuance of an agreement and for valuable consideration, or in consideration of an antecedent debt, to place a chose in action or fund out of the control of the owner, and appropriate it to or in favor of another person, amounts to an equitable assignment. Thus, an agreement, between a debtor and a creditor, that the debt shall be paid out of a specific fund going to the debtor may operate as an equitable assignment.

In Egyptian Navigation Co. v. Baker Invs. Corp. , 2008 U.S. Dist. LEXIS 30804 (S.D.N.Y. Apr. 14, 2008), the court stated that an equitable assignment occurs under English law when an assignor, with an intent to transfer his/her right to a chose in action, informs the assignee about the right so transferred.

An executory agreement or a declaration of trust are also equitable assignments if unenforceable as assignments by a court of law but enforceable by a court of equity exercising sound discretion according to the circumstances of the case. Since California combines courts of equity and courts of law, the same court would hear arguments as to whether an equitable assignment had occurred. Quite often, such relief is granted to avoid fraud or unjust enrichment.

Note that obtaining an assignment through fraudulent means invalidates the assignment. Fraud destroys the validity of everything into which it enters. It vitiates the most solemn contracts, documents, and even judgments. Walker v. Rich , 79 Cal. App. 139 (Cal. App. 1926). If an assignment is made with the fraudulent intent to delay, hinder, and defraud creditors, then it is void as fraudulent in fact. See our article on Transfers to Defraud Creditors .

But note that the motives that prompted an assignor to make the transfer will be considered as immaterial and will constitute no defense to an action by the assignee, if an assignment is considered as valid in all other respects.

Enforceability of Assignments:

Whether a right under a contract is capable of being transferred is determined by the law of the place where the contract was entered into. The validity and effect of an assignment is determined by the law of the place of assignment. The validity of an assignment of a contractual right is governed by the law of the state with the most significant relationship to the assignment and the parties.

In some jurisdictions, the traditional conflict of laws rules governing assignments has been rejected and the law of the place having the most significant contacts with the assignment applies. In Downs v. American Mut. Liability Ins. Co ., 14 N.Y.2d 266 (N.Y. 1964), a wife and her husband separated and the wife obtained a judgment of separation from the husband in New York. The judgment required the husband to pay a certain yearly sum to the wife. The husband assigned 50 percent of his future salary, wages, and earnings to the wife. The agreement authorized the employer to make such payments to the wife.

After the husband moved from New York, the wife learned that he was employed by an employer in Massachusetts. She sent the proper notice and demanded payment under the agreement. The employer refused and the wife brought an action for enforcement. The court observed that Massachusetts did not prohibit assignment of the husband’s wages. Moreover, Massachusetts law was not controlling because New York had the most significant relationship with the assignment. Therefore, the court ruled in favor of the wife.

Therefore, the validity of an assignment is determined by looking to the law of the forum with the most significant relationship to the assignment itself. To determine the applicable law of assignments, the court must look to the law of the state which is most significantly related to the principal issue before it.

Assignment of Contractual Rights:

Generally, the law allows the assignment of a contractual right unless the substitution of rights would materially change the duty of the obligor, materially increase the burden or risk imposed on the obligor by the contract, materially impair the chance of obtaining return performance, or materially reduce the value of the performance to the obligor. Restat 2d of Contracts, § 317(2)(a). This presumes that the underlying agreement is silent on the right to assign.

If the contract specifically precludes assignment, the contractual right is not assignable. Whether a contract is assignable is a matter of contractual intent and one must look to the language used by the parties to discern that intent.

In the absence of an express provision to the contrary, the rights and duties under a bilateral executory contract that does not involve personal skill, trust, or confidence may be assigned without the consent of the other party. But note that an assignment is invalid if it would materially alter the other party’s duties and responsibilities. Once an assignment is effective, the assignee stands in the shoes of the assignor and assumes all of assignor’s rights. Hence, after a valid assignment, the assignor’s right to performance is extinguished, transferred to assignee, and the assignee possesses the same rights, benefits, and remedies assignor once possessed. Robert Lamb Hart Planners & Architects v. Evergreen, Ltd. , 787 F. Supp. 753 (S.D. Ohio 1992).

On the other hand, an assignee’s right against the obligor is subject to “all of the limitations of the assignor’s right, all defenses thereto, and all set-offs and counterclaims which would have been available against the assignor had there been no assignment, provided that these defenses and set-offs are based on facts existing at the time of the assignment.” See Robert Lamb , case, above.

The power of the contract to restrict assignment is broad. Usually, contractual provisions that restrict assignment of the contract without the consent of the obligor are valid and enforceable, even when there is statutory authorization for the assignment. The restriction of the power to assign is often ineffective unless the restriction is expressly and precisely stated. Anti-assignment clauses are effective only if they contain clear, unambiguous language of prohibition. Anti-assignment clauses protect only the obligor and do not affect the transaction between the assignee and assignor.

Usually, a prohibition against the assignment of a contract does not prevent an assignment of the right to receive payments due, unless circumstances indicate the contrary. Moreover, the contracting parties cannot, by a mere non-assignment provision, prevent the effectual alienation of the right to money which becomes due under the contract.

A contract provision prohibiting or restricting an assignment may be waived, or a party may so act as to be estopped from objecting to the assignment, such as by effectively ratifying the assignment. The power to void an assignment made in violation of an anti-assignment clause may be waived either before or after the assignment. See our article on Contracts.

Noncompete Clauses and Assignments:

Of critical import to most buyers of businesses is the ability to ensure that key employees of the business being purchased cannot start a competing company. Some states strictly limit such clauses, some do allow them. California does restrict noncompete clauses, only allowing them under certain circumstances. A common question in those states that do allow them is whether such rights can be assigned to a new party, such as the buyer of the buyer.

A covenant not to compete, also called a non-competitive clause, is a formal agreement prohibiting one party from performing similar work or business within a designated area for a specified amount of time. This type of clause is generally included in contracts between employer and employee and contracts between buyer and seller of a business.

Many workers sign a covenant not to compete as part of the paperwork required for employment. It may be a separate document similar to a non-disclosure agreement, or buried within a number of other clauses in a contract. A covenant not to compete is generally legal and enforceable, although there are some exceptions and restrictions.

Whenever a company recruits skilled employees, it invests a significant amount of time and training. For example, it often takes years before a research chemist or a design engineer develops a workable knowledge of a company’s product line, including trade secrets and highly sensitive information. Once an employee gains this knowledge and experience, however, all sorts of things can happen. The employee could work for the company until retirement, accept a better offer from a competing company or start up his or her own business.

A covenant not to compete may cover a number of potential issues between employers and former employees. Many companies spend years developing a local base of customers or clients. It is important that this customer base not fall into the hands of local competitors. When an employee signs a covenant not to compete, he or she usually agrees not to use insider knowledge of the company’s customer base to disadvantage the company. The covenant not to compete often defines a broad geographical area considered off-limits to former employees, possibly tens or hundreds of miles.

Another area of concern covered by a covenant not to compete is a potential ‘brain drain’. Some high-level former employees may seek to recruit others from the same company to create new competition. Retention of employees, especially those with unique skills or proprietary knowledge, is vital for most companies, so a covenant not to compete may spell out definite restrictions on the hiring or recruiting of employees.

A covenant not to compete may also define a specific amount of time before a former employee can seek employment in a similar field. Many companies offer a substantial severance package to make sure former employees are financially solvent until the terms of the covenant not to compete have been met.

Because the use of a covenant not to compete can be controversial, a handful of states, including California, have largely banned this type of contractual language. The legal enforcement of these agreements falls on individual states, and many have sided with the employee during arbitration or litigation. A covenant not to compete must be reasonable and specific, with defined time periods and coverage areas. If the agreement gives the company too much power over former employees or is ambiguous, state courts may declare it to be overbroad and therefore unenforceable. In such case, the employee would be free to pursue any employment opportunity, including working for a direct competitor or starting up a new company of his or her own.

It has been held that an employee’s covenant not to compete is assignable where one business is transferred to another, that a merger does not constitute an assignment of a covenant not to compete, and that a covenant not to compete is enforceable by a successor to the employer where the assignment does not create an added burden of employment or other disadvantage to the employee. However, in some states such as Hawaii, it has also been held that a covenant not to compete is not assignable and under various statutes for various reasons that such covenants are not enforceable against an employee by a successor to the employer. Hawaii v. Gannett Pac. Corp. , 99 F. Supp. 2d 1241 (D. Haw. 1999)

It is vital to obtain the relevant law of the applicable state before drafting or attempting to enforce assignment rights in this particular area.

Conclusion:

In the current business world of fast changing structures, agreements, employees and projects, the ability to assign rights and obligations is essential to allow flexibility and adjustment to new situations. Conversely, the ability to hold a contracting party into the deal may be essential for the future of a party. Thus, the law of assignments and the restriction on same is a critical aspect of every agreement and every structure. This basic provision is often glanced at by the contracting parties, or scribbled into the deal at the last minute but can easily become the most vital part of the transaction.

As an example, one client of ours came into the office outraged that his co venturer on a sizable exporting agreement, who had excellent connections in Brazil, had elected to pursue another venture instead and assigned the agreement to a party unknown to our client and without the business contacts our client considered vital. When we examined the handwritten agreement our client had drafted in a restaurant in Sao Paolo, we discovered there was no restriction on assignment whatsoever…our client had not even considered that right when drafting the agreement after a full day of work.

One choses who one does business with carefully…to ensure that one’s choice remains the party on the other side of the contract, one must master the ability to negotiate proper assignment provisions.

Founded in 1939, our law firm combines the ability to represent clients in domestic or international matters with the personal interaction with clients that is traditional to a long established law firm.

Read more about our firm

© 2024, Stimmel, Stimmel & Roeser, All rights reserved  | Terms of Use | Site by Bay Design

• Coaching Team
• Investor Tools
• Student Success

Real Estate Investing Strategies

• Real Estate Business
• Real Estate Markets
• Real Estate Financing
• REITs & Stock Investing

How To Navigate The Real Estate Assignment Contract

What is assignment of contract?

Assignment of contract vs double close

How to assign a contract

Assignment of contract pros and cons

Even the most left-brained, technical real estate practitioners may find themselves overwhelmed by the legal forms that have become synonymous with the investing industry. The assignment of contract strategy, in particular, has developed a confusing reputation for those unfamiliar with the concept of wholesaling. At the very least, there’s a good chance the “assignment of contract real estate” exit strategy sounds more like a foreign language to new investors than a viable means to an end.

A real estate assignment contract isn’t as complicated as many make it out to be, nor is it something to shy away from because of a lack of understanding. Instead, new investors need to learn how to assign a real estate contract as this particular exit strategy represents one of the best ways to break into the industry.

In this article, we will break down the elements of a real estate assignment contract, or a real estate wholesale contract, and provide strategies for how it can help investors further their careers. [ Thinking about investing in real estate? Register to attend a FREE online real estate class and learn how to get started investing in real estate. ]

What Is A Real Estate Assignment Contract?

A real estate assignment contract is a wholesale strategy used by real estate investors to facilitate the sale of a property between an owner and an end buyer. As its name suggests, contract assignment strategies will witness a subject property owner sign a contract with an investor that gives them the rights to buy the home. That’s an important distinction to make, as the contract only gives the investor the right to buy the home; they don’t actually follow through on a purchase. Once under contract, however, the investor retains the sole right to buy the home. That means they may then sell their rights to buy the house to another buyer. Therefore, when a wholesaler executes a contact assignment, they aren’t selling a house but rather their rights to buy a house. The end buyer will pay the wholesale a small assignment fee and buy the house from the original buyer.

The real estate assignment contract strategy is only as strong as the contracts used in the agreement. The language used in the respective contract is of the utmost importance and should clearly define what the investors and sellers expect out of the deal.

There are a couple of caveats to keep in mind when considering using sales contracts for real estate:

Contract prohibitions: Make sure the contract you have with the property seller does not have prohibitions for future assignments. This can create serious issues down the road. Make sure the contract is drafted by a lawyer that specializes in real estate assignment contract law.

Property-specific prohibitions: HUD homes (property obtained by the Department of Housing and Urban Development), real estate owned or REOs (foreclosed-upon property), and listed properties are not open to assignment contracts. REO properties, for example, have a 90-day period before being allowed to be resold.

What Is An Assignment Fee In Real Estate?

An assignment fee in real estate is the money a wholesaler can expect to receive from an end buyer when they sell them their rights to buy the subject property. In other words, the assignment fee serves as the monetary compensation awarded to the wholesaler for connecting the original seller with the end buyer.

Again, any contract used to disclose a wholesale deal should be completely transparent, and including the assignment fee is no exception. The terms of how an investor will be paid upon assigning a contract should, nonetheless, be spelled out in the contract itself.

The standard assignment fee is $5,000. However, every deal is different. Buyers differ on their needs and criteria for spending their money (e.g., rehabbing vs. buy-and-hold buyers). As with any negotiations , proper information is vital. Take the time to find out how much the property would realistically cost before and after repairs. Then, add your preferred assignment fee on top of it.

Traditionally, investors will receive a deposit when they sign the Assignment of Real Estate Purchase and Sale Agreement . The rest of the assignment fee will be paid out upon the deal closing.

Assignment Contract Vs Double Close

The real estate assignment contract strategy is just one of the two methods investors may use to wholesale a deal. In addition to assigning contracts, investors may also choose to double close. While both strategies are essentially variations of a wholesale deal, several differences must be noted.

A double closing, otherwise known as a back-to-back closing, will have investors actually purchase the home. However, instead of holding onto it, they will immediately sell the asset without rehabbing it. Double closings aren’t as traditional as fast as contract assignment, but they can be in the right situation. Double closings can also take as long as a few weeks. In the end, double closings aren’t all that different from a traditional buy and sell; they transpire over a meeter of weeks instead of months.

Assignment real estate strategies are usually the first option investors will want to consider, as they are slightly easier and less involved. That said, real estate assignment contract methods aren’t necessarily better; they are just different. The wholesale strategy an investor chooses is entirely dependent on their situation. For example, if a buyer cannot line up funding fast enough, they may need to initiate a double closing because they don’t have the capital to pay the acquisition costs and assignment fee. Meanwhile, select institutional lenders incorporate language against lending money in an assignment of contract scenario. Therefore, any subsequent wholesale will need to be an assignment of contract.

Double closings and contract assignments are simply two means of obtaining the same end. Neither is better than the other; they are meant to be used in different scenarios.

Flipping Real Estate Contracts

Those unfamiliar with the real estate contract assignment concept may know it as something else: flipping real estate contracts; if for nothing else, the two are one-in-the-same. Flipping real estate contracts is simply another way to refer to assigning a contract.

Is An Assignment Of Contract Legal?

Yes, an assignment of contract is legal when executed correctly. Wholesalers must follow local laws regulating the language of contracts, as some jurisdictions have more regulations than others. It is also becoming increasingly common to assign contracts to a legal entity or LLC rather than an individual, to prevent objections from the bank. Note that you will need written consent from all parties listed on the contract, and there cannot be any clauses present that violate the law. If you have any questions about the specific language to include in a contract, it’s always a good idea to consult a qualified real estate attorney.

When Will Assignments Not Be Enforced?

In certain cases, an assignment of contract will not be enforced. Most notably, if the contract violates the law or any local regulations it cannot be enforced. This is why it is always encouraged to understand real estate laws and policy as soon as you enter the industry. Further, working with a qualified attorney when crafting contracts can be beneficial.

It may seem obvious, but assignment contracts will not be enforced if the language is used incorrectly. If the language in a contract contradicts itself, or if the contract is not legally binding it cannot be enforced. Essentially if there is any anti-assignment language, this can void the contract. Finally, if the assignment violates what is included under the contract, for example by devaluing the item, the contract will likely not be enforced.

How To Assign A Real Estate Contract

A wholesaling investment strategy that utilizes assignment contracts has many advantages, one of them being a low barrier-to-entry for investors. However, despite its inherent profitability, there are a lot of investors that underestimate the process. While probably the easiest exit strategy in all of real estate investing, there are a number of steps that must be taken to ensure a timely and profitable contract assignment, not the least of which include:

Find the right property

Acquire a real estate contract template

Submit the contract

Assign the contract

Collect the fee

1. Find The Right Property

You need to prune your leads, whether from newspaper ads, online marketing, or direct mail marketing. Remember, you aren’t just looking for any seller: you need a motivated seller who will sell their property at a price that works with your investing strategy.

The difference between a regular seller and a motivated seller is the latter’s sense of urgency. A motivated seller wants their property sold now. Pick a seller who wants to be rid of their property in the quickest time possible. It could be because they’re moving out of state, or they want to buy another house in a different area ASAP. Or, they don’t want to live in that house anymore for personal reasons. The key is to know their motivation for selling and determine if that intent is enough to sell immediately.

With a better idea of who to buy from, wholesalers will have an easier time exercising one of several marketing strategies:

Direct Mail

Real Estate Meetings

Local Marketing

2. Acquire A Real Estate Contract Template

Real estate assignment contract templates are readily available online. Although it’s tempting to go the DIY route, it’s generally advisable to let a lawyer see it first. This way, you will have the comfort of knowing you are doing it right, and that you have counsel in case of any legal problems along the way.

One of the things proper wholesale real estate contracts add is the phrase “and/or assigns” next to your name. This clause will give you the authority to sell the property or assign the property to another buyer.

You do need to disclose this to the seller and explain the clause if needed. Assure them that they will still get the amount you both agreed upon, but it gives you deal flexibility down the road.

3. Submit The Contract

Depending on your state’s laws, you need to submit your real estate assignment contract to a title company, or a closing attorney, for a title search. These are independent parties that look into the history of a property, seeing that there are no liens attached to the title. They then sign off on the validity of the contract.

4. Assign The Contract

Finding your buyer, similar to finding a seller, requires proper segmentation. When searching for buyers, investors should exercise several avenues, including online marketing, listing websites, or networking groups. In the real estate industry, this process is called building a buyer’s list, and it is a crucial step to finding success in assigning contracts.

Once you have found a buyer (hopefully from your ever-growing buyer’s list), ensure your contract includes language that covers earnest money to be paid upfront. This grants you protection against a possible breach of contract. This also assures you that you will profit, whether the transaction closes or not, as earnest money is non-refundable. How much it is depends on you, as long as it is properly justified.

5. Collect The Fee

Your profit from a deal of this kind comes from both your assignment fee, as well as the difference between the agreed-upon value and how much you sell it to the buyer. If you and the seller decide you will buy the property for $75,000 and sell it for $80,000 to the buyer, you profit $5,000. The deal is closed once the buyer pays the full $80,000.

Assignment of Contract Pros

For many investors, the most attractive benefit of an assignment of contract is the ability to profit without ever purchasing a property. This is often what attracts people to start wholesaling, as it allows many to learn the ropes of real estate with relatively low stakes. An assignment fee can either be determined as a percentage of the purchase price or as a set amount determined by the wholesaler. A standard fee is around $5,000 per contract.

The profit potential is not the only positive associated with an assignment of contract. Investors also benefit from not being added to the title chain, which can greatly reduce the costs and timeline associated with a deal. This benefit can even transfer to the seller and end buyer, as they get to avoid paying a real estate agent fee by opting for an assignment of contract. Compared to a double close (another popular wholesaling strategy), investors can avoid two sets of closing costs. All of these pros can positively impact an investor’s bottom line, making this a highly desirable exit strategy.

Assignment of Contract Cons

Although there are numerous perks to an assignment of contract, there are a few downsides to be aware of before searching for your first wholesale deal. Namely, working with buyers and sellers who may not be familiar with wholesaling can be challenging. Investors need to be prepared to familiarize newcomers with the process and be ready to answer any questions. Occasionally, sellers will purposely not accept an assignment of contract situation. Investors should occasionally expect this, as to not get discouraged.

Another obstacle wholesalers may face when working with an assignment of contract is in cases where the end buyer wants to back out. This can happen if the buyer is not comfortable paying the assignment fee, or if they don’t have owner’s rights until the contract is fully assigned. The best way to protect yourself from situations like this is to form a reliable buyer’s list and be upfront with all of the information. It is always recommended to develop a solid contract as well.

Know that not all properties can be wholesaled, for example HUD houses. In these cases, there are often anti-assigned clauses preventing wholesalers from getting involved. Make sure you know how to identify these properties so you don’t waste your time. Keep in mind that while there are cons to this real estate exit strategy, the right preparation can help investors avoid any big challenges.

Assignment of Contract Template

If you decide to pursue a career wholesaling real estate, then you’ll want the tools that will make your life as easy as possible. The good news is that there are plenty of real estate tools and templates at your disposal so that you don’t have to reinvent the wheel! For instance, here is an assignment of contract template that you can use when you strike your first deal.

As with any part of the real estate investing trade, no single aspect will lead to success. However, understanding how a real estate assignment of contract works is vital for this business. When you comprehend the many layers of how contracts are assigned—and how wholesaling works from beginning to end—you’ll be a more informed, educated, and successful investor.

Click the banner below to take a 90-minute online training class and get started learning how to invest in today’s real estate market!

What is an STR in Real Estate?

Wholetailing: a guide for real estate investors, what is chain of title in real estate investing, what is a real estate fund of funds (fof), reits vs real estate: which is the better investment, multi-family vs. single-family property investments: a comprehensive guide.