chapter 4 research paper quantitative

How To Write The Results/Findings Chapter

For quantitative studies (dissertations & theses).

By: Derek Jansen (MBA). Expert Reviewed By: Kerryn Warren (PhD) | July 2021

So, you’ve completed your quantitative data analysis and it’s time to report on your findings. But where do you start? In this post, we’ll walk you through the results chapter (also called the findings or analysis chapter), step by step, so that you can craft this section of your dissertation or thesis with confidence. If you’re looking for information regarding the results chapter for qualitative studies, you can find that here .

Overview: Quantitative Results Chapter

• What exactly the results/findings/analysis chapter is
• What you need to include in your results chapter
• How to structure your results chapter
• A few tips and tricks for writing top-notch chapter

What exactly is the results chapter?

The results chapter (also referred to as the findings or analysis chapter) is one of the most important chapters of your dissertation or thesis because it shows the reader what you’ve found in terms of the quantitative data you’ve collected. It presents the data using a clear text narrative, supported by tables, graphs and charts. In doing so, it also highlights any potential issues (such as outliers or unusual findings) you’ve come across.

But how’s that different from the discussion chapter?

Well, in the results chapter, you only present your statistical findings. Only the numbers, so to speak – no more, no less. Contrasted to this, in the discussion chapter , you interpret your findings and link them to prior research (i.e. your literature review), as well as your research objectives and research questions . In other words, the results chapter presents and describes the data, while the discussion chapter interprets the data.

Let’s look at an example.

In your results chapter, you may have a plot that shows how respondents to a survey  responded: the numbers of respondents per category, for instance. You may also state whether this supports a hypothesis by using a p-value from a statistical test. But it is only in the discussion chapter where you will say why this is relevant or how it compares with the literature or the broader picture. So, in your results chapter, make sure that you don’t present anything other than the hard facts – this is not the place for subjectivity.

It’s worth mentioning that some universities prefer you to combine the results and discussion chapters. Even so, it is good practice to separate the results and discussion elements within the chapter, as this ensures your findings are fully described. Typically, though, the results and discussion chapters are split up in quantitative studies. If you’re unsure, chat with your research supervisor or chair to find out what their preference is.

What should you include in the results chapter?

Following your analysis, it’s likely you’ll have far more data than are necessary to include in your chapter. In all likelihood, you’ll have a mountain of SPSS or R output data, and it’s your job to decide what’s most relevant. You’ll need to cut through the noise and focus on the data that matters.

This doesn’t mean that those analyses were a waste of time – on the contrary, those analyses ensure that you have a good understanding of your dataset and how to interpret it. However, that doesn’t mean your reader or examiner needs to see the 165 histograms you created! Relevance is key.

How do I decide what’s relevant?

At this point, it can be difficult to strike a balance between what is and isn’t important. But the most important thing is to ensure your results reflect and align with the purpose of your study .  So, you need to revisit your research aims, objectives and research questions and use these as a litmus test for relevance. Make sure that you refer back to these constantly when writing up your chapter so that you stay on track.

As a general guide, your results chapter will typically include the following:

• Some demographic data about your sample
• Reliability tests (if you used measurement scales)
• Descriptive statistics
• Inferential statistics (if your research objectives and questions require these)
• Hypothesis tests (again, if your research objectives and questions require these)

We’ll discuss each of these points in more detail in the next section.

Importantly, your results chapter needs to lay the foundation for your discussion chapter . This means that, in your results chapter, you need to include all the data that you will use as the basis for your interpretation in the discussion chapter.

For example, if you plan to highlight the strong relationship between Variable X and Variable Y in your discussion chapter, you need to present the respective analysis in your results chapter – perhaps a correlation or regression analysis.

Need a helping hand?

How do I write the results chapter?

There are multiple steps involved in writing up the results chapter for your quantitative research. The exact number of steps applicable to you will vary from study to study and will depend on the nature of the research aims, objectives and research questions . However, we’ll outline the generic steps below.

Step 1 – Revisit your research questions

The first step in writing your results chapter is to revisit your research objectives and research questions . These will be (or at least, should be!) the driving force behind your results and discussion chapters, so you need to review them and then ask yourself which statistical analyses and tests (from your mountain of data) would specifically help you address these . For each research objective and research question, list the specific piece (or pieces) of analysis that address it.

At this stage, it’s also useful to think about the key points that you want to raise in your discussion chapter and note these down so that you have a clear reminder of which data points and analyses you want to highlight in the results chapter. Again, list your points and then list the specific piece of analysis that addresses each point. 

Next, you should draw up a rough outline of how you plan to structure your chapter . Which analyses and statistical tests will you present and in what order? We’ll discuss the “standard structure” in more detail later, but it’s worth mentioning now that it’s always useful to draw up a rough outline before you start writing (this advice applies to any chapter).

Step 2 – Craft an overview introduction

As with all chapters in your dissertation or thesis, you should start your quantitative results chapter by providing a brief overview of what you’ll do in the chapter and why . For example, you’d explain that you will start by presenting demographic data to understand the representativeness of the sample, before moving onto X, Y and Z.

This section shouldn’t be lengthy – a paragraph or two maximum. Also, it’s a good idea to weave the research questions into this section so that there’s a golden thread that runs through the document.

Step 3 – Present the sample demographic data

The first set of data that you’ll present is an overview of the sample demographics – in other words, the demographics of your respondents.

For example:

• What age range are they?
• How is gender distributed?
• How is ethnicity distributed?
• What areas do the participants live in?

The purpose of this is to assess how representative the sample is of the broader population. This is important for the sake of the generalisability of the results. If your sample is not representative of the population, you will not be able to generalise your findings. This is not necessarily the end of the world, but it is a limitation you’ll need to acknowledge.

Of course, to make this representativeness assessment, you’ll need to have a clear view of the demographics of the population. So, make sure that you design your survey to capture the correct demographic information that you will compare your sample to.

But what if I’m not interested in generalisability?

Well, even if your purpose is not necessarily to extrapolate your findings to the broader population, understanding your sample will allow you to interpret your findings appropriately, considering who responded. In other words, it will help you contextualise your findings . For example, if 80% of your sample was aged over 65, this may be a significant contextual factor to consider when interpreting the data. Therefore, it’s important to understand and present the demographic data.

 Step 4 – Review composite measures and the data “shape”.

Before you undertake any statistical analysis, you’ll need to do some checks to ensure that your data are suitable for the analysis methods and techniques you plan to use. If you try to analyse data that doesn’t meet the assumptions of a specific statistical technique, your results will be largely meaningless. Therefore, you may need to show that the methods and techniques you’ll use are “allowed”.

Most commonly, there are two areas you need to pay attention to:

#1: Composite measures

The first is when you have multiple scale-based measures that combine to capture one construct – this is called a composite measure .  For example, you may have four Likert scale-based measures that (should) all measure the same thing, but in different ways. In other words, in a survey, these four scales should all receive similar ratings. This is called “ internal consistency ”.

Internal consistency is not guaranteed though (especially if you developed the measures yourself), so you need to assess the reliability of each composite measure using a test. Typically, Cronbach’s Alpha is a common test used to assess internal consistency – i.e., to show that the items you’re combining are more or less saying the same thing. A high alpha score means that your measure is internally consistent. A low alpha score means you may need to consider scrapping one or more of the measures.

#2: Data shape

The second matter that you should address early on in your results chapter is data shape. In other words, you need to assess whether the data in your set are symmetrical (i.e. normally distributed) or not, as this will directly impact what type of analyses you can use. For many common inferential tests such as T-tests or ANOVAs (we’ll discuss these a bit later), your data needs to be normally distributed. If it’s not, you’ll need to adjust your strategy and use alternative tests.

To assess the shape of the data, you’ll usually assess a variety of descriptive statistics (such as the mean, median and skewness), which is what we’ll look at next.

Step 5 – Present the descriptive statistics

Now that you’ve laid the foundation by discussing the representativeness of your sample, as well as the reliability of your measures and the shape of your data, you can get started with the actual statistical analysis. The first step is to present the descriptive statistics for your variables.

For scaled data, this usually includes statistics such as:

• The mean – this is simply the mathematical average of a range of numbers.
• The median – this is the midpoint in a range of numbers when the numbers are arranged in order.
• The mode – this is the most commonly repeated number in the data set.
• Standard deviation – this metric indicates how dispersed a range of numbers is. In other words, how close all the numbers are to the mean (the average).
• Skewness – this indicates how symmetrical a range of numbers is. In other words, do they tend to cluster into a smooth bell curve shape in the middle of the graph (this is called a normal or parametric distribution), or do they lean to the left or right (this is called a non-normal or non-parametric distribution).
• Kurtosis – this metric indicates whether the data are heavily or lightly-tailed, relative to the normal distribution. In other words, how peaked or flat the distribution is.

A large table that indicates all the above for multiple variables can be a very effective way to present your data economically. You can also use colour coding to help make the data more easily digestible.

For categorical data, where you show the percentage of people who chose or fit into a category, for instance, you can either just plain describe the percentages or numbers of people who responded to something or use graphs and charts (such as bar graphs and pie charts) to present your data in this section of the chapter.

When using figures, make sure that you label them simply and clearly , so that your reader can easily understand them. There’s nothing more frustrating than a graph that’s missing axis labels! Keep in mind that although you’ll be presenting charts and graphs, your text content needs to present a clear narrative that can stand on its own. In other words, don’t rely purely on your figures and tables to convey your key points: highlight the crucial trends and values in the text. Figures and tables should complement the writing, not carry it .

Depending on your research aims, objectives and research questions, you may stop your analysis at this point (i.e. descriptive statistics). However, if your study requires inferential statistics, then it’s time to deep dive into those .

Step 6 – Present the inferential statistics

Inferential statistics are used to make generalisations about a population , whereas descriptive statistics focus purely on the sample . Inferential statistical techniques, broadly speaking, can be broken down into two groups .

First, there are those that compare measurements between groups , such as t-tests (which measure differences between two groups) and ANOVAs (which measure differences between multiple groups). Second, there are techniques that assess the relationships between variables , such as correlation analysis and regression analysis. Within each of these, some tests can be used for normally distributed (parametric) data and some tests are designed specifically for use on non-parametric data.

There are a seemingly endless number of tests that you can use to crunch your data, so it’s easy to run down a rabbit hole and end up with piles of test data. Ultimately, the most important thing is to make sure that you adopt the tests and techniques that allow you to achieve your research objectives and answer your research questions .

In this section of the results chapter, you should try to make use of figures and visual components as effectively as possible. For example, if you present a correlation table, use colour coding to highlight the significance of the correlation values, or scatterplots to visually demonstrate what the trend is. The easier you make it for your reader to digest your findings, the more effectively you’ll be able to make your arguments in the next chapter.

Step 7 – Test your hypotheses

If your study requires it, the next stage is hypothesis testing. A hypothesis is a statement , often indicating a difference between groups or relationship between variables, that can be supported or rejected by a statistical test. However, not all studies will involve hypotheses (again, it depends on the research objectives), so don’t feel like you “must” present and test hypotheses just because you’re undertaking quantitative research.

The basic process for hypothesis testing is as follows:

• Specify your null hypothesis (for example, “The chemical psilocybin has no effect on time perception).
• Specify your alternative hypothesis (e.g., “The chemical psilocybin has an effect on time perception)
• Set your significance level (this is usually 0.05)
• Calculate your statistics and find your p-value (e.g., p=0.01)
• Draw your conclusions (e.g., “The chemical psilocybin does have an effect on time perception”)

Finally, if the aim of your study is to develop and test a conceptual framework , this is the time to present it, following the testing of your hypotheses. While you don’t need to develop or discuss these findings further in the results chapter, indicating whether the tests (and their p-values) support or reject the hypotheses is crucial.

Step 8 – Provide a chapter summary

To wrap up your results chapter and transition to the discussion chapter, you should provide a brief summary of the key findings . “Brief” is the keyword here – much like the chapter introduction, this shouldn’t be lengthy – a paragraph or two maximum. Highlight the findings most relevant to your research objectives and research questions, and wrap it up.

Some final thoughts, tips and tricks

Now that you’ve got the essentials down, here are a few tips and tricks to make your quantitative results chapter shine:

• When writing your results chapter, report your findings in the past tense . You’re talking about what you’ve found in your data, not what you are currently looking for or trying to find.
• Structure your results chapter systematically and sequentially . If you had two experiments where findings from the one generated inputs into the other, report on them in order.
• Make your own tables and graphs rather than copying and pasting them from statistical analysis programmes like SPSS. Check out the DataIsBeautiful reddit for some inspiration.
• Once you’re done writing, review your work to make sure that you have provided enough information to answer your research questions , but also that you didn’t include superfluous information.

If you’ve got any questions about writing up the quantitative results chapter, please leave a comment below. If you’d like 1-on-1 assistance with your quantitative analysis and discussion, check out our hands-on coaching service , or book a free consultation with a friendly coach.

Psst… there’s more (for free)

This post is part of our dissertation mini-course, which covers everything you need to get started with your dissertation, thesis or research project. 

You Might Also Like:

Thank you. I will try my best to write my results.

Awesome content 👏🏾

this was great explaination

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

• Chapter Four: Quantitative Methods (Part 3 - Making Sense of Your Study)

After you have designed your study, collected your data, and analyzed it, you have to figure out what it means and communicate that to potential interested audiences. This section of the chapter is about how to make sense of your study, in terms of data interpretation, data write-up, and data presentation, as seen in the above diagram.

• Chapter One: Introduction
• Chapter Two: Understanding the distinctions among research methods
• Chapter Three: Ethical research, writing, and creative work
• Chapter Four: Quantitative Methods (Part 1)
• Chapter Four: Quantitative Methods (Part 2 - Doing Your Study)
• Chapter Five: Qualitative Methods (Part 1)
• Chapter Five: Qualitative Data (Part 2)
• Chapter Six: Critical / Rhetorical Methods (Part 1)
• Chapter Six: Critical / Rhetorical Methods (Part 2)
• Chapter Seven: Presenting Your Results

Data Interpretation

Once you have run your statistics, you have to figure out what your findings mean or interpret your data. To do this, you need to tie back your findings to your research questions and/or hypotheses, think about how your findings relate to what you discovered beforehand about the already existing literature, and determine how your findings take the literature or current theory in the field further. Your interpretation of the data you collected will be found in the last section of your paper, what is commonly called the "discussion" section.

Remember Your RQs/Hs

Your research questions and hypotheses, once developed, should guide your study throughout the research process. As you are choosing your research design, choosing how to operationalize your variables, and choosing/conducting your statistical tests, you should always keep your RQs and Hs in mind.

What were you wanting to discover by your study? What were you wanting to test? Make sure you answer these questions clearly for the reader of your study in both the results and discussion section of the paper. (Specific guidelines for these sections will be covered later in this chapter, including the common practice of placing the data as you present it with each research question in the results section.)

Tie Findings to Your Literature Review

As you have seen in chapter 3 and the Appendix, and will see in chapter 7, the literature review is what you use to set up your quantitative study and to show why there is a need for your study. It should start out broad, with the context for your study, and lead into showing what still needs to be known and studied about your topic area, justifying your focus in the study. It will be brought in again in the last section of the paper you write, i.e., the discussion section.

Your paper is like an hourglass – starting out broad and narrowing down in the middle with your actual study and findings, and then moving to broad implications for the larger context of your study near the end.

Think about Relationship of Findings to Theory

One of the things you will write about in your discussion or last section of your paper is the implications of what you found. These implications are both practical and theoretical. Practical implications are how the research can provide practical applications to real-world people and issues. Theoretical implications are how the research takes the current academic literature further, specifically, in relationship to theory-building.

Did any of the research you reviewed for your literature review mention a theory your findings could expand upon? If so, you should think about how your findings related to this theory. If not, then think about the theories you have already studied in your communication classes. Would any of them provide a possible explanation of what you found? Would your findings help expand that theory to a different context, the context you studied? Does a theory need to be developed in the area of your research? If so, then what aspects of that theory could your findings help explain?

Data Write-Up

All quantitative studies, when written, have four parts. The first part is the introduction and literature review, the second part is the methods section, the third section is the results or findings, and the fourth section is the discussion section. This portion of this chapter will explain what elements you will need to include in each of these sections.

Literature Review

The beginning of your paper and first few pages sets the tone for your study. It tells the reader what the context of your study is and what other people who are also interested in your topic have studied about your topic.

There are many ways to organize a literature review, as can be seen in the following website. Literature Reviews — The Writing Center at UNC-Chapel Hill

After you have done a thorough literature search on your topic, then you have to organize your literature into topics of some kind. Your main goal is to show what has been done and what still needs to be done, to show the need for your study, so at the end of each section of your literature review, you should identify what still needs to be known about that particular area.

For quantitative research, you should do your literature review before coming up with your research questions/hypotheses. Your questions and hypotheses should flow from the literature. This is different from the other two research methods discussed in this book, which do not rely so heavily on a literature review to situation the study before conducting it.

In the methods section, you should tell your reader how you conducted your study, from start to finish, explaining why you made the choices you did along the way. A reader should be able to replicate your study from the descriptions you provide in this section of your write-up. Common headings in the methods section include a description of the participants, procedures, and analysis.

Participants

For the participants' subheading of the methods section, you should minimally report the demographics of your sample in terms of biological sex (frequencies/percentages), age (range of ages and mean), and ethnicity (frequencies/percentages). If you collected data on other demographics, such as socioeconomic status, religious affiliation, type of occupation, etc., then you can report data for that also in the participants' sub-section.

For the procedures sub-section, you report everything you did to collect your data: how you recruited your participants, including what type of sampling you used (probability or non-probability) and informed consent procedures; how you operationalized your variables (including your survey questions, which often are explained in the methods section briefly while the whole survey can be found in an appendix of your paper); the validity and reliability of your survey instrument or methods you used; and what type of study design you had (experimental, quasi-experimental, or non-experimental). For each one of these design issues, in this sub-section of the methods part, you need to explain why you made the decisions you did in order to answer your research questions or test your hypotheses.

In this section, you explain how you converted your data for analysis and how you analyzed your data. You need to explain what statistics you chose to run for each of your research questions/hypotheses and why.

In this section of your paper, you organize the results by your research questions/hypotheses. For each research question/hypothesis, you should present any descriptive statistic results first and then your inferential statistics results. You do not make any interpretation of what your results mean or why you think you got the results you did. You merely report your results.

Reporting Significant Results

For each of the inferential statistics, there is a typical template you can follow when reporting significant results: reporting the test statistic value, the degrees of freedom  3 , and the probability level. Examples follow for each of the statistics we have talked about in this text.

T-test results

"T-tests results show there was a significant difference found between men and women on their levels of self-esteem,  t  (df) = t value,  p  < .05, with men's self-esteem being higher (or lower) (men's mean & standard deviation) than women's self-esteem (women's mean & standard deviation)."

ANOVA results

"ANOVA results indicate there was a significant difference found between [levels of independent variable] on [dependent variable],  F  (df) = F value,  p  < .05."

If doing a factorial ANOVA, you would report the above sentence for all of your independent variables (main effects), as well as for the interaction (interaction effect), with language something like: "ANOVA results indicate a significant main effect for [independent variable] on [dependent variable],  F  (df) = F value,  p  < .05. .... ANOVA results indicate a significant interaction effect between [independent variables] on [dependent variable],  F  (df) = F value,  p  < .05."

See example YouTube tutorial for writing up a two-way ANOVA at the following website.

Factorial Design (Part C): Writing Up Results

Chi-square results

For goodness of fit results, your write-up would look something like: "Using a chi-square goodness of fit test, there was a significant difference found between observed and expected values of [variable], χ2 (df) = chi-square value,  p  < .05." For test of independence results, it would like like: "Using a chi-square test of independence, there was a significant interaction between [your two variables], χ2 (df) = chi-square value,  p  < .05."

Correlation results

"Using Pearson's [or Spearman's] correlation coefficient, there was a significant relationship found between [two variables],  r  (df) = r value,  p  < .05." If there are a lot of significant correlation results, these results are often presented in a table form.

For more information on these types of tables, see the following website:  Correlation Tables .

Regression results

Reporting regression results is more complicated, but generally, you want to inform the reader about how much variance is accounted by the regression model, the significance level of the model, and the significance of the predictor variable. For example:

A regression analysis, predicting GPA scores from GRE scores, was statistically significant,  F (1,8) = 10.34,  p  < .05.

Coefficientsa

The regression equation is: Ŷ = .411 * .005X. For every one unit increase in GRE score, there is a corresponding increase in GPA of .005 (Walen-Frederick, n.d., p. 4).

For more write-up help on regression and other statistics, see the following website location:

Multiple Regression  (pp. 217-220)

Reporting Non-Significant Results

You can follow a similar template when reporting non-significant results for all of the above inferential statistics. It is the same as provided in the above examples, except the word "non-significant" replaces the word "significant," and the  p  values are adjusted to indicate  p > .05.

Many times readers of articles do not read the whole article, especially if they are afraid of the statistical sections. When this happens, they often read the discussion section, which makes this a very important section in your writing. You should include the following elements in your discussion section: (a) a summary of your findings, (b) implications, (c) limitations, and (d) future research ideas.

Summary of Findings

You should summarize the answers to your research questions or what you found when testing your hypotheses in this sub-section of the discussion section. You should not report any statistical data here, but just put your results into narrative form. What did you find out that you did not know before doing your study? Answer that question in this sub- section.

Implications

You need to indicate why your study was important, both theoretically and practically. For the theoretical implications, you should relate what you found to the already existing literature, as discussed earlier when the "hourglass" format was mentioned as a way of conceptualizing your whole paper. If your study added anything to the existing theory on a particular topic, you talk about this here as well.

For practical implications, you need to identify for the reader how this study can help people in their real-world experiences related to your topic. You do not want your study to just be important to academic researchers, but also to other professionals and persons interested in your topic.

Limitations

As you get through conducting your study, you are going to realize there are things you wish you had done differently. Rather than hide these things from the reader, it is better to forthrightly state these for the reader. Explain why your study is limited and what you wish you had done in this sub-section.

Future Research

The limitations sub-section usually is tied directly to the future research sub-section, as your limitations mean that future research should be done to deal with these limitations. There may also be other things that could be studied, however, as a result of what you have found. What would other people say are the "gaps" your study left unstudied on your topic? These should be identified, with some suggestions on how they might be studied.

Other Aspects of the Paper

There are other parts of the academic paper you should include in your final write-up. We have provided useful resources for you to consider when including these aspects as part of your paper. For an example paper that uses the required APA format for a research paper write-up, see the following source:  Varying Definitions of Online Communication .

Abstract & Titles.

Research Abstracts General Format

Tables, References, & Other Materials.

APA Tables and Figures 1 Reference List: Basic Rules

Data Presentation

You will probably be called upon to present your data in other venues besides in writing. Two of the most common venues are oral presentations such as in class or at conferences, and poster presentations, such as what you might find at conferences. You might also be called upon to not write an academic write-up of your study, but rather to provide an executive summary of the results of your study to the "powers that be," who do not have time to read more than 5 pages or so of a summary. There are good resources for doing all of these online, so we have provided these here.

Oral Presentations

Oral Presentations Delivering Presentations

Poster Presentations

Executive Summary

Executive Summaries Complete the Report Good & Poor Examples of Executive Summaries with the following link: http://unilearning.uow.edu.au/report/4bi1.html

Congratulations! You have learned a great deal about how to go about using quantitative methods for your future research projects. You have learned how to design a quantitative study, conduct a quantitative study, and write about a quantitative study. You have some good resources you can take with you when you leave this class. Now, you just have to apply what you have learned to projects that will come your way in the future.

Remember, just because you may not like one method the best does not mean you should not use it. Your research questions/hypotheses should ALWAYS drive your choice of which method you use. And remember also that you can do quantitative methods!

[NOTE: References are not provided for the websites cited in the text, even though if this was an actual research article, they would need to be cited.]

Baker, E., Baker, W., & Tedesco, J. C. (2007). Organizations respond to phishing: Exploring the public relations tackle box.  Communication Research Reports, 24  (4), 327-339.

Benoit, W. L., & Hansen, G. J. (2004). Presidential debate watching, issue knowledge, character evaluation, and vote choice.  Human Communication Research, 30  (1), 121-144.

Chatham, A. (1991).  Home vs. public schooling: What about relationships in adolescence? Doctoral dissertation, University of Oklahoma.

Cousineau, T. M., Rancourt, D., and Green, T. C. (2006). Web chatter before and after the women's health initiative results: A content analysis of on-line menopause message boards.  Journal of Health Communication, 11 (2), 133-147.

Derlega, V., Winstead, B. A., Mathews, A., and Braitman, A. L. (2008). Why does someone reveal highly personal information?: Attributions for and against self-disclosure in close relationships.  Communication Research Reports, 25 , 115-130.

Fischer, J., & Corcoran, K. (2007).  Measures for clinical practice and research: A sourcebook (volumes 1 & 2) . New York: Oxford University Press.

Guay, S., Boisvert, J.-M., & Freeston, M. H. (2003). Validity of three measures of communication for predicting relationship adjustment and stability among a sample of young couples.  Psychological Assessment , 15(3), 392-398.

Holbert, R. L., Tschida, D. A., Dixon, M., Cherry, K., Steuber, K., & Airne, D. (2005). The  West Wing  and depictions of the American Presidency: Expanding the domains of framing in political communication.  Communication Quarterly, 53  (4), 505-522.

Jensen, J. D. (2008). Scientific uncertainty in news coverage of cancer research: Effects of hedging on scientists' and journalists' credibility.  Human Communication Research, 34 , 347- 369.

Keyton, J. (2011).  Communicating research: Asking questions, finding answers . New York: McGraw Hill.

Lenhart, A., Ling, R., Campbell, S., & Purcell, K. (2010, Apr. 10).  Teens and mobile phones . Report from the Pew Internet and American Life Project, retrieved from  http://www.pewinternet.org/Reports/2010/Teens-and-Mobile-Phones.aspx .

Maddy, T. (2008).  Tests: A comprehensive reference for assessments in psychology, education, and business . Austin, TX: Pro-Ed.

McCollum Jr., J. F., & Bryant, J. (2003). Pacing in children's television programming.  Mass Communication and Society, 6  (2), 115-136.

Medved, C. E., Brogan, S. M., McClanahan, A. M., Morris, J. F., & Shepherd, G. J. (2006). Family and work socializing communication: Messages, gender, and ideological implications.  Journal of Family Communication, 6 (3), 161-180.

Moyer-Gusé, E., & Nabi, R. L. (2010). Explaining the effects of narrative in an entertainment television program: Overcoming resistance to persuasion.  Human Communication Research, 36 , 26-52.

Nabi, R. L. (2009). Cosmetic surgery makeover programs and intentions to undergo cosmetic enhancements: A consideration of three models of media effects.  Human Communication Research, 35 , 1-27.

Pearson, J. C., DeWitt, L., Child, J. T., Kahl Jr., D. H., and Dandamudi, V. (2007). Facing the fear: An analysis of speech-anxiety content in public-speaking textbooks.  Communication Research Reports, 24 (2), 159-168.

Rubin. R. B., Rubin, A. M., Graham, E., Perse, E. M., & Seibold, D. (2009).  Communication research measures II: A sourcebook . New York: Routledge.

Serota, K. B., Levine, T. R., and Boster, F. J. (2010). The prevalence of lying in America: Three studies of reported deception.  Human Communication Research, 36 , 1-24.

Sheldon, P. (2008). The relationship between unwillingness-to-communicate and students' facebook use.  Journal of Media Psychology, 20 (2), 67–75.

Trochim, W. M. K. (2006). Reliability and validity.  Research methods data base , retrieved from  http://www.socialresearchmethods.net/kb/relandval.php .

Walen-Frederick, H. (n.d.).  Help sheet for reading SPSS printouts . Retrieved from  http://www.scribd.com/doc/51982223/help-sheet-for-reading-spss-printouts .

Weaver, A. J., & Wilson, B. J. (2009). The role of graphic and sanitized violence in the enjoyment of television dramas.  Human Communication Research, 35 (3), 442-463.

Weber, K., Corrigan, M., Fornash, B., & Neupauer, N. C. (2003). The effect of interest on recall: An experiment.  Communication Research Reports, 20 (2), 116-123.

Witt, P. L., & Schrodt, P. (2006). The influence of instructional technology use and teacher immediacy on student affect for teacher and course.  Communication Reports, 19 (1), 1-15.

3 Degrees of freedom (df) relate to your sample size and to the number of groups being compared. SPSS always computes the df for your statistics. For more information on degrees of freedom, see the following web-based resources:  http://www.youtube.com/watch?v=wsvfasNpU2s  and  http://www.creative-wisdom.com/pub/df/index.htm .

Back to Previous Spot

Personal Knowledge Management, Leadership Styles, and Organisational Performance pp 35–47 Cite as

Discussion of Research Findings

• Vissanu Zumitzavan 3 &
• Jonathan Michie 4  
• First Online: 01 January 2015

3141 Accesses

Part of the book series: SpringerBriefs in Business ((BRIEFSBUSINESS))

This chapter presents the findings of the statistical analysis incorporated with descriptive statistics, correlations and multiple regression analysis. The variables are gender, age, education, experience, number of employees, PKM, leadership styles and organisational performance. Finally, we report the results from analysing our data and our research findings are discussed.

• Leadership Style
• Laissez-faire Leadership
• Transactional Leadership
• Beta Coefficients
• Significant Linear Relationship

These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

This is a preview of subscription content, log in via an institution .

Buying options

• Available as PDF
• Read on any device
• Instant download
• Own it forever
• Available as EPUB and PDF
• Compact, lightweight edition
• Dispatched in 3 to 5 business days
• Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Author information

Authors and affiliations.

The College of Local Administration, Khon Kaen University, Khon Kaen, Thailand

Vissanu Zumitzavan

University of Oxford, Oxford, UK

Jonathan Michie

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to Vissanu Zumitzavan .

Rights and permissions

Reprints and permissions

Copyright information

© 2015 The Author(s)

About this chapter

Cite this chapter.

Zumitzavan, V., Michie, J. (2015). Discussion of Research Findings. In: Personal Knowledge Management, Leadership Styles, and Organisational Performance. SpringerBriefs in Business. Springer, Singapore. https://doi.org/10.1007/978-981-287-438-2_4

Download citation

DOI : https://doi.org/10.1007/978-981-287-438-2_4

Published : 27 February 2015

Publisher Name : Springer, Singapore

Print ISBN : 978-981-287-437-5

Online ISBN : 978-981-287-438-2

eBook Packages : Business and Economics Business and Management (R0)

Share this chapter

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Publish with us

Policies and ethics

• Find a journal
• Track your research

• Introduction for Types of Dissertations
• Overview of the Dissertation
• Self-Assessment Exercise
• What is a Dissertation Committee
• Different Types of Dissertations
• Introduction for Overview of the Dissertation Process
• Responsibilities: the Chair, the Team and You
• Sorting Exercise
• Stages of a Dissertation
• Managing Your Time
• Create Your Own Timeline
• Working with a Writing Partner
• Key Deadlines
• Self Assessment Exercise
• Additional Resources
• Purpose and Goals
• Read and Evaluate Chapter 1 Exemplars
• Draft an Introduction of the Study
• Outline the Background of the Problem
• Draft your Statement of the Problem
• Draft your Purpose of the Study
• Draft your Significance of the Study
• List the Possible Limitations and Delimitations
• Explicate the Definition of Terms
• Outline the Organization of the Study
• Recommended Resources and Readings
• Purpose of the Literature Review
• What is the Literature?
• Article Summary Table
• Writing a Short Literature Review
• Outline for Literature Review
• Synthesizing the Literature Review
• Purpose of the Methodology Chapter
• Topics to Include
• Preparing to Write the Methodology Chapter
• Confidentiality
• Building the Components for Chapter Three
• Preparing for Your Qualifying Exam (aka Proposal Defense)
• What is Needed for Your Proposal Defense?
• Submitting Your Best Draft
• Preparing Your Abstract for IRB
• Use of Self-Assessment
• Preparing Your PowerPoint
• During Your Proposal Defense
• After Your Proposal Defense
• Pre-observation – Issues to consider
• During Observations
• Wrapping Up
• Recommended Resources and Readings (Qualitative)
• Quantitative Data Collection
• Recommended Resources and Readings (Quantitative)
• Qualitative: Before you Start
• Qualitative: During Analysis
• Qualitative: After Analysis
• Qualitative: Recommended Resources and Readings
• Quantitative: Deciding on the Right Analysis
• Quantitative: Data Management and Cleaning
• Quantitative: Keep Track of your Analysis
• The Purpose of Chapter 4
• The Elements of Chapter 4
• Presenting Results (Quantitative)
• Presenting Findings (Qualitative)
• Chapter 4 Considerations
• The Purpose of Chapter 5
• Preparing Your Abstract for the Graduate School
• Draft the Introduction for Chapter 5
• Draft the Summary of Findings
• Draft Implications for Practice
• Draft your Recommendations for Research
• Draft your Conclusions
• What is Needed
• What Happens During the Final Defense?
• What Happens After the Final Defense?

The Purpose of Chapter 4 Topic 1:  Chapter 4