how to write a phd results chapter

How To Write The Results/Findings Chapter

For quantitative studies (dissertations & theses).

By: Derek Jansen (MBA) | Expert Reviewed By: Kerryn Warren (PhD) | July 2021

So, you’ve completed your quantitative data analysis and it’s time to report on your findings. But where do you start? In this post, we’ll walk you through the results chapter (also called the findings or analysis chapter), step by step, so that you can craft this section of your dissertation or thesis with confidence. If you’re looking for information regarding the results chapter for qualitative studies, you can find that here .

Overview: Quantitative Results Chapter

• What exactly the results chapter is
• What you need to include in your chapter
• How to structure the chapter
• Tips and tricks for writing a top-notch chapter
• Free results chapter template

What exactly is the results chapter?

The results chapter (also referred to as the findings or analysis chapter) is one of the most important chapters of your dissertation or thesis because it shows the reader what you’ve found in terms of the quantitative data you’ve collected. It presents the data using a clear text narrative, supported by tables, graphs and charts. In doing so, it also highlights any potential issues (such as outliers or unusual findings) you’ve come across.

But how’s that different from the discussion chapter?

Well, in the results chapter, you only present your statistical findings. Only the numbers, so to speak – no more, no less. Contrasted to this, in the discussion chapter , you interpret your findings and link them to prior research (i.e. your literature review), as well as your research objectives and research questions . In other words, the results chapter presents and describes the data, while the discussion chapter interprets the data.

Let’s look at an example.

In your results chapter, you may have a plot that shows how respondents to a survey  responded: the numbers of respondents per category, for instance. You may also state whether this supports a hypothesis by using a p-value from a statistical test. But it is only in the discussion chapter where you will say why this is relevant or how it compares with the literature or the broader picture. So, in your results chapter, make sure that you don’t present anything other than the hard facts – this is not the place for subjectivity.

It’s worth mentioning that some universities prefer you to combine the results and discussion chapters. Even so, it is good practice to separate the results and discussion elements within the chapter, as this ensures your findings are fully described. Typically, though, the results and discussion chapters are split up in quantitative studies. If you’re unsure, chat with your research supervisor or chair to find out what their preference is.

What should you include in the results chapter?

Following your analysis, it’s likely you’ll have far more data than are necessary to include in your chapter. In all likelihood, you’ll have a mountain of SPSS or R output data, and it’s your job to decide what’s most relevant. You’ll need to cut through the noise and focus on the data that matters.

This doesn’t mean that those analyses were a waste of time – on the contrary, those analyses ensure that you have a good understanding of your dataset and how to interpret it. However, that doesn’t mean your reader or examiner needs to see the 165 histograms you created! Relevance is key.

How do I decide what’s relevant?

At this point, it can be difficult to strike a balance between what is and isn’t important. But the most important thing is to ensure your results reflect and align with the purpose of your study .  So, you need to revisit your research aims, objectives and research questions and use these as a litmus test for relevance. Make sure that you refer back to these constantly when writing up your chapter so that you stay on track.

As a general guide, your results chapter will typically include the following:

• Some demographic data about your sample
• Reliability tests (if you used measurement scales)
• Descriptive statistics
• Inferential statistics (if your research objectives and questions require these)
• Hypothesis tests (again, if your research objectives and questions require these)

We’ll discuss each of these points in more detail in the next section.

Importantly, your results chapter needs to lay the foundation for your discussion chapter . This means that, in your results chapter, you need to include all the data that you will use as the basis for your interpretation in the discussion chapter.

For example, if you plan to highlight the strong relationship between Variable X and Variable Y in your discussion chapter, you need to present the respective analysis in your results chapter – perhaps a correlation or regression analysis.

Need a helping hand?

How do I write the results chapter?

There are multiple steps involved in writing up the results chapter for your quantitative research. The exact number of steps applicable to you will vary from study to study and will depend on the nature of the research aims, objectives and research questions . However, we’ll outline the generic steps below.

Step 1 – Revisit your research questions

The first step in writing your results chapter is to revisit your research objectives and research questions . These will be (or at least, should be!) the driving force behind your results and discussion chapters, so you need to review them and then ask yourself which statistical analyses and tests (from your mountain of data) would specifically help you address these . For each research objective and research question, list the specific piece (or pieces) of analysis that address it.

At this stage, it’s also useful to think about the key points that you want to raise in your discussion chapter and note these down so that you have a clear reminder of which data points and analyses you want to highlight in the results chapter. Again, list your points and then list the specific piece of analysis that addresses each point. 

Next, you should draw up a rough outline of how you plan to structure your chapter . Which analyses and statistical tests will you present and in what order? We’ll discuss the “standard structure” in more detail later, but it’s worth mentioning now that it’s always useful to draw up a rough outline before you start writing (this advice applies to any chapter).

Step 2 – Craft an overview introduction

As with all chapters in your dissertation or thesis, you should start your quantitative results chapter by providing a brief overview of what you’ll do in the chapter and why . For example, you’d explain that you will start by presenting demographic data to understand the representativeness of the sample, before moving onto X, Y and Z.

This section shouldn’t be lengthy – a paragraph or two maximum. Also, it’s a good idea to weave the research questions into this section so that there’s a golden thread that runs through the document.

Step 3 – Present the sample demographic data

The first set of data that you’ll present is an overview of the sample demographics – in other words, the demographics of your respondents.

For example:

• What age range are they?
• How is gender distributed?
• How is ethnicity distributed?
• What areas do the participants live in?

The purpose of this is to assess how representative the sample is of the broader population. This is important for the sake of the generalisability of the results. If your sample is not representative of the population, you will not be able to generalise your findings. This is not necessarily the end of the world, but it is a limitation you’ll need to acknowledge.

Of course, to make this representativeness assessment, you’ll need to have a clear view of the demographics of the population. So, make sure that you design your survey to capture the correct demographic information that you will compare your sample to.

But what if I’m not interested in generalisability?

Well, even if your purpose is not necessarily to extrapolate your findings to the broader population, understanding your sample will allow you to interpret your findings appropriately, considering who responded. In other words, it will help you contextualise your findings . For example, if 80% of your sample was aged over 65, this may be a significant contextual factor to consider when interpreting the data. Therefore, it’s important to understand and present the demographic data.

 Step 4 – Review composite measures and the data “shape”.

Before you undertake any statistical analysis, you’ll need to do some checks to ensure that your data are suitable for the analysis methods and techniques you plan to use. If you try to analyse data that doesn’t meet the assumptions of a specific statistical technique, your results will be largely meaningless. Therefore, you may need to show that the methods and techniques you’ll use are “allowed”.

Most commonly, there are two areas you need to pay attention to:

#1: Composite measures

The first is when you have multiple scale-based measures that combine to capture one construct – this is called a composite measure .  For example, you may have four Likert scale-based measures that (should) all measure the same thing, but in different ways. In other words, in a survey, these four scales should all receive similar ratings. This is called “ internal consistency ”.

Internal consistency is not guaranteed though (especially if you developed the measures yourself), so you need to assess the reliability of each composite measure using a test. Typically, Cronbach’s Alpha is a common test used to assess internal consistency – i.e., to show that the items you’re combining are more or less saying the same thing. A high alpha score means that your measure is internally consistent. A low alpha score means you may need to consider scrapping one or more of the measures.

#2: Data shape

The second matter that you should address early on in your results chapter is data shape. In other words, you need to assess whether the data in your set are symmetrical (i.e. normally distributed) or not, as this will directly impact what type of analyses you can use. For many common inferential tests such as T-tests or ANOVAs (we’ll discuss these a bit later), your data needs to be normally distributed. If it’s not, you’ll need to adjust your strategy and use alternative tests.

To assess the shape of the data, you’ll usually assess a variety of descriptive statistics (such as the mean, median and skewness), which is what we’ll look at next.

Step 5 – Present the descriptive statistics

Now that you’ve laid the foundation by discussing the representativeness of your sample, as well as the reliability of your measures and the shape of your data, you can get started with the actual statistical analysis. The first step is to present the descriptive statistics for your variables.

For scaled data, this usually includes statistics such as:

• The mean – this is simply the mathematical average of a range of numbers.
• The median – this is the midpoint in a range of numbers when the numbers are arranged in order.
• The mode – this is the most commonly repeated number in the data set.
• Standard deviation – this metric indicates how dispersed a range of numbers is. In other words, how close all the numbers are to the mean (the average).
• Skewness – this indicates how symmetrical a range of numbers is. In other words, do they tend to cluster into a smooth bell curve shape in the middle of the graph (this is called a normal or parametric distribution), or do they lean to the left or right (this is called a non-normal or non-parametric distribution).
• Kurtosis – this metric indicates whether the data are heavily or lightly-tailed, relative to the normal distribution. In other words, how peaked or flat the distribution is.

A large table that indicates all the above for multiple variables can be a very effective way to present your data economically. You can also use colour coding to help make the data more easily digestible.

For categorical data, where you show the percentage of people who chose or fit into a category, for instance, you can either just plain describe the percentages or numbers of people who responded to something or use graphs and charts (such as bar graphs and pie charts) to present your data in this section of the chapter.

When using figures, make sure that you label them simply and clearly , so that your reader can easily understand them. There’s nothing more frustrating than a graph that’s missing axis labels! Keep in mind that although you’ll be presenting charts and graphs, your text content needs to present a clear narrative that can stand on its own. In other words, don’t rely purely on your figures and tables to convey your key points: highlight the crucial trends and values in the text. Figures and tables should complement the writing, not carry it .

Depending on your research aims, objectives and research questions, you may stop your analysis at this point (i.e. descriptive statistics). However, if your study requires inferential statistics, then it’s time to deep dive into those .

Step 6 – Present the inferential statistics

Inferential statistics are used to make generalisations about a population , whereas descriptive statistics focus purely on the sample . Inferential statistical techniques, broadly speaking, can be broken down into two groups .

First, there are those that compare measurements between groups , such as t-tests (which measure differences between two groups) and ANOVAs (which measure differences between multiple groups). Second, there are techniques that assess the relationships between variables , such as correlation analysis and regression analysis. Within each of these, some tests can be used for normally distributed (parametric) data and some tests are designed specifically for use on non-parametric data.

There are a seemingly endless number of tests that you can use to crunch your data, so it’s easy to run down a rabbit hole and end up with piles of test data. Ultimately, the most important thing is to make sure that you adopt the tests and techniques that allow you to achieve your research objectives and answer your research questions .

In this section of the results chapter, you should try to make use of figures and visual components as effectively as possible. For example, if you present a correlation table, use colour coding to highlight the significance of the correlation values, or scatterplots to visually demonstrate what the trend is. The easier you make it for your reader to digest your findings, the more effectively you’ll be able to make your arguments in the next chapter.

Step 7 – Test your hypotheses

If your study requires it, the next stage is hypothesis testing. A hypothesis is a statement , often indicating a difference between groups or relationship between variables, that can be supported or rejected by a statistical test. However, not all studies will involve hypotheses (again, it depends on the research objectives), so don’t feel like you “must” present and test hypotheses just because you’re undertaking quantitative research.

The basic process for hypothesis testing is as follows:

• Specify your null hypothesis (for example, “The chemical psilocybin has no effect on time perception).
• Specify your alternative hypothesis (e.g., “The chemical psilocybin has an effect on time perception)
• Set your significance level (this is usually 0.05)
• Calculate your statistics and find your p-value (e.g., p=0.01)
• Draw your conclusions (e.g., “The chemical psilocybin does have an effect on time perception”)

Finally, if the aim of your study is to develop and test a conceptual framework , this is the time to present it, following the testing of your hypotheses. While you don’t need to develop or discuss these findings further in the results chapter, indicating whether the tests (and their p-values) support or reject the hypotheses is crucial.

Step 8 – Provide a chapter summary

To wrap up your results chapter and transition to the discussion chapter, you should provide a brief summary of the key findings . “Brief” is the keyword here – much like the chapter introduction, this shouldn’t be lengthy – a paragraph or two maximum. Highlight the findings most relevant to your research objectives and research questions, and wrap it up.

Some final thoughts, tips and tricks

Now that you’ve got the essentials down, here are a few tips and tricks to make your quantitative results chapter shine:

• When writing your results chapter, report your findings in the past tense . You’re talking about what you’ve found in your data, not what you are currently looking for or trying to find.
• Structure your results chapter systematically and sequentially . If you had two experiments where findings from the one generated inputs into the other, report on them in order.
• Make your own tables and graphs rather than copying and pasting them from statistical analysis programmes like SPSS. Check out the DataIsBeautiful reddit for some inspiration.
• Once you’re done writing, review your work to make sure that you have provided enough information to answer your research questions , but also that you didn’t include superfluous information.

If you’ve got any questions about writing up the quantitative results chapter, please leave a comment below. If you’d like 1-on-1 assistance with your quantitative analysis and discussion, check out our hands-on coaching service , or book a free consultation with a friendly coach.

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

Thank you. I will try my best to write my results.

Awesome content 👏🏾

this was great explaination

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

How to write a PhD in Biological Sciences: a guide for the uninitiated

Chapter 45 the results.

This is perhaps the easiest section of your chapter or manuscript to write. However, there are still many mistakes that are made. Here, I will start with the approach that you should take, and then go through some of the common mistakes.

45.1 Description of your data

Some studies have a set of descriptive results that, by convention, are placed without a section header at the start of the results. These normally convey the size of the dataset that entered into the rest of the analyses. If the size of the dataset varies by design in the methods, then you don’t need it here. But you can’t always control the sample size, so it needs to be established before moving on to the rest of the results. It may be that your methods do not always produce predictable results. In genetic studies, for example, this might include the number of samples that were collected and successfully sequenced, and thus entered into the rest of the analyses.

Whenever you provide a summary of a variable (e.g. the mean), remember to include the variance; the range, standard deviation, or standard error in brackets following the mean. If you collected a lot of variables, it may be more relevant to have them summarised in a table.

Once you have described the result, either make reference to the Table , Figure or Supplementary Information where this can be seen. If your tests are already in a table , then they should not be repeated in your text. Instead, simply make a summary statement asserting the results and add “(see Table 1)”.

It is important to include mention of how much data was missing compared to your aim in the Material and Methods section. For example, an entire replicate may have been compromised, or a collection date might have been skipped for logistical reasons.

If you are not testing an explicit hypothesis your results will concentrate on the description of your data, and your analysis of the pertinent information that it contains. This may be done through tables, figures or models. If you modelled your data, you will need to show all models tested either in a table in the results, or in the Supplementary Information . You will also likely need to describe how you selected the best model and describe it. Although it is correct to describe your model here, do not try to interpret your findings. This is done in the discussion .

45.2 Responding to your hypotheses

The easiest way to write the results is simply to have the questions or hypotheses that you posed at the end of the introduction and use them as subheadings for your results section (Figure 45.1 ). Once you have these subheadings, you simply assemble all of the results that address that hypothesis. You should already have all the tests that you used in the Material and Methods section. No additional tests should be listed in the results if they were not already described in the Material and Methods section.

FIGURE 45.1: You may well find that your results section is the shortest section of your manuscript. Only report what you need to in this section. Keep results that don’t respond to your hypotheses for the Supplementary Information.

Remember that the most important aspect to your results is the size of any effect that you find and the confidence intervals, and not whether or not it is significant ( Dushoff, Kain & Bolker, 2019 ) . This is not to say that significance should not be reported, this is important, and care should be taken to report the significance in a non-binary fashion ( Dushoff, Kain & Bolker, 2019 ; Muff et al., 2021 ) - see below .

The results section often includes a lot of statistical testing, resulting in lots of numbers inside brackets within the text. This is all expected and fine, but consider consolidating multiple iterations into a table (if appropriate).

When describing the relationship between two variables, make sure that you state the direction of the effect. This means not simply stating that they have a statistical relationship, but what that relationship is. For example, explaining that one increases with the other (a direct relationship), or one increases when the other decreases (an inverse relationship). Note that other types of variable relationships exist. When describing this relationship, you should also include the effect size (how much the relationship differs from no relationship), and the power of your test (usually the number of replicates that allows you to avoid a Type II error ).

45.2.1 Moving away from binary significance

Traditionally, we would say that only if P is less than α (alpha is usually 0.05) should you use the word ‘significant’ when describing the effect. However, the statistical community (including the biological community) is waking up to the need to replace the idea of the binary reporting of significance (“significant” or “not significant”), with wording that better reflects the reality of statistical testing ” (see Muff et al., 2021 ) . The reason for this is that it represents a misunderstanding of statistical testing, and can be very misleading to those that read the results. Instead, we must appreciate that the position of our estimate of the P statistic lies somewhere along a continuum of potential results, and should be reported as such. The suggested change in language can be simply implemented as shown in Figure 45.1 .

FIGURE 45.2: Help your reader to better interpret the meaning of your statistical testing by changing your language. The figure shows some suggested language to use when writing about your results depending on the value of P that you find. These words should replace the binary outcome “significant” or “not significant” (see Muff et al., 2021 ) .

While this approach succeeds in getting away from the significance dichotomy, there are still dissenting voices with the concept of P values representing continuous measures of evidence ( Goodman & Royall, 1988 ) . Another approach is to talk about the results of your significance tests in terms of the clarity that they provide about the relationship between the variables measured ( Dushoff, Kain & Bolker, 2019 ) : whether they show a “statistically clear relationship” (aka significant), or “statistically unclear” (aka insigificant) (see Dushoff, Kain & Bolker, 2019 for examples) . Here, I stress that if you have a lower value for P (e.g. equating to strong evidence) you haven’t provided any additional evidence, you simply have more confidence in the non-compatibility of your data with your null hypothesis (H 0 ). Your result is confined to the dataset that you are presenting. If you want additional evidence, then you need to run replicate experiments. Or, better still, find another mechanism in the biological sciences through which you can measure or test the same relationship.

There are better alternatives when it comes to statistical testing, but getting the inferential wording correct may still represent a challenge for non-statisticians.

If you have a statistical test with a P value, you do have to insert the results into the text, include the test statistic, degrees of freedom (which incorporates N - the sample size) and the value of P. My suggestion is that you also consider exactly what you can say about your result, the effect size, confidence intervals and inferred relationship between the variables, as well as any statistical significance.

45.3 When to have a table or graph?

Most journals will allow you to have as many tables or graphs as you need to give your results. There are a few important things to consider. First, that data shouldn’t be repeated. So don’t have a table of results where the same results are also in a graph (or even two graphs that show the same data). Also, don’t repeat data from a figure or table in your text. You need to decide how best to present your data. If you can’t decide then discuss it with your advisor by presenting them with the alternatives. Good results should convey your findings clearly, and consulting with others should quickly help you decide which approach is effective.

See sections on tables and figures below.

45.4 Responding to hypotheses

While I encourage you to present data that corresponds to hypotheses here in the results section, you should not formally accept or reject your hypothesis in the results. This is done in the discussion, and allows you to present caveats and other important issues.

45.5 Common mistakes

• Having extra analyses in the results that you didn’t include in your methods. If you really didn’t anticipate conducting the extra tests, then these are actually post hoc (after the event) tests (not anticipated before the study) and you should think carefully about how to treat these. Otherwise, you’ll need to rejig your methods to make sure that all tests are included.
• Meaningless precision. This can happen throughout a thesis or manuscript (e.g. in the Materials and Methods), but it is most common in the results when too many significant figures are reported. For example, the output of your analysis might tell you that flight feathers in one population are 2.6484332 mm longer than those of another (± 0.0654562 mm), but in your methods you only use callipers that have a precision of 0.01 mm. Reporting results beyond the precision whereby they can be measured becomes meaningless. Whenever you obtain the output of a statistical package, you need to make sure that you use your practical head to re-interpret these results and think about what they actually mean.
• Repeating numbers in the text that are already in tables or graphs. The text is likely to be packed with numbers already, so don’t repeat any that are already represented elsewhere.
• Repeating text in different sections. As you’ve seen elsewhere in this book , repeating text simply isn’t acceptable. It doesn’t matter if you did the same thing many times, you can always write something in a different way. Having repeated text is the fastest way to bore the pants off your reader, and therefore must be avoided at all costs.

How to plan, structure and write every chapter in your PhD

In this collection, we’ll walk you through each chapter of your thesis. You’ll learn what goes where and how it fits together. 

The PhD Discussion Chapter: What It Is & How To Write It

  Your PhD discussion chapter is your thesis's intellectual epicenter. Think of it as the scholarly equivalent of a courtroom closing argument, where you summarise the evidence and make your case. Perhaps that’s why it’s so tricky - the skills you need in your...

Everything you wanted to know about structuring your PhD but were too afraid to ask

Understanding how to structure your PhD is tough. It helps to break it down into four distinct sections. In this guide, we explain how.

How to find the thread that runs through your PhD thesis

You probably worry about finding the thread that runs through the PhD thesis. In this guide we walk you through what’s required.

How to edit a PhD thesis (without going mad)

Your thesis takes a lot of time to research, ideate, and write. Here’s how to properly edit a PhD thesis such that you impress your examiners and achieve even greater success.

The 9 most effective ways to achieve PhD success

  Writing a PhD is physically, intellectually and emotionally daunting. You may spend each day doubting yourself, not sure if you’re making the right choices and unsure whether you’ve got what it takes. During my life, I’ve helped thousands of PhD students like...

How To Structure A PhD Thesis

Struggling to understand what goes where? Let us walk you through a non-nonsense guide that’ll teach you how to structure a PhD thesis.

The difference between empirical and discussion chapters (and how to write them)

There is a very important distinction that needs to be made between the empirical and discussion sections/chapters. It is a common misconception that the empirical chapters are the place for your analysis. Often this confuses the reader.

Five tips to improve your PhD thesis

Regardless of what stage of the writing process you are at, there are five overarching tips you need to keep in mind if you want to improve your PhD thesis.

What are you doing and how are you doing it? Articulating your aims and objectives.

How long does it take the person reading your thesis to understand what you’re doing and how you’re doing it? If the answer is anything other than ’in the the opening lines of the thesis’, keep reading.

Learn how to write a PhD proposal that will stand out from the rest

When stripped down to its basic components, the PhD proposal explains the what and the why of your research. What it will be about and why it will be important.

Easily understand how to write a PhD thesis introduction

Get the introduction right and the rest of your dissertation will follow. Mess it up and you’ll be struggling to catch up. The introduction is the place to factually recount what it is you will be discussing in the thesis. Learn more in this detailed guide.

Last impressions count – writing your PhD thesis conclusion

The conclusion is the last thing your examiner will read before they write their viva report. You need to make sure it stands out.

What is a dissertation abstract and how do I write one for my PhD?

Don’t underestimate how hard it is to write a PhD thesis abstract. When I wrote mine I though it’d be straightforward. Far from it. It’s tricky. You have to condense hundred of pages and years of work into a few hundred words.

Russian (dolls) to the rescue – how to structure an argument in your PhD

At the core of the PhD are arguments. Lots of them. Some more important and some very specific. When you understand how to structure an argument, your thesis reads clearly and logically. If you don’t the reader ends up confused and your thesis suffers.

Drowning in a sea of authors – How to be critical in a PhD literature review.

Don’t get lost in a sea of authors when you write your PhD literature review. Instead be critical. In this guide we explain how.

Wrestling an elephant into a cupboard: how to write a PhD literature review in nine easy steps

When I was writing my PhD I hated the literature review. I was scared of it. I thought it would be impossible to grapple. So much so that it used to keep me up at night. Now I know how easy it can be and I’m sharing my top tips with you today.

A Template To Help You Structure Your PhD’s Theoretical Framework Chapter

In this guide, I explain how to use the theory framework template. The focus is on the practical things to consider when you’re working with the template and how you can give your theory framework the rockstar treatment.

How To Structure A PhD With Our PhD Writing Template

Our PhD Writing Template allows you to visualise your PhD on one page. Here we explain how to fill it in and how it can help you structure each chapter.

Eureka! When I learnt how to write a theoretical framework

The theoretical framework is so important, but so misunderstood. Here we explain it is in simple terms: as a toolbox.

Explore Other PhD Knowledge Base Collections

Eight collections of free resources to help you along the phd journey.

Mastering your theory and literature review chapters

How to structure and write every chapter of the PhD

How to stay motivated and productive

Techniques to improve your writing and fluency

Advice on maintaining good mental health

Resources designed for non-native English speakers

Explore our back-catalogue of motivational advice

Each week we send out a short, motivational email to over 4,000 students. Here you can sign up and access the archive.

A free one-page PhD structure template

• How it works

How to Write a Dissertation Discussion Chapter – A Quick Guide with Examples

Published by Alvin Nicolas at August 12th, 2021 , Revised On September 20, 2023

Dissertation discussion is the chapter where you explore the relevance, significance, and meanings of your findings  – allowing you to showcase your talents in describing and analyzing the results of your study.

Here, you will be expected to demonstrate how your research findings  answer the  research questions  established or test the  hypothesis .

The arguments you assert in the dissertation analysis and discussions chapter lay the foundations of your conclusion . It is critically important to discuss the results in a precise manner.

To help you understand how to write a dissertation discussion chapter, here is the list of the main elements of this section so you stay on the right track when writing:

• Summary: Start by providing a summary of your key research findings
• Interpretations: What is the significance of your findings?
• Implications: Why are your findings important to academic and scientific communities, and what purpose would they serve?
• Limitations: When and where will your results have no implications?
• Future Recommendations : Advice for other researchers and scientists who explore the topic further in future.

The dissertation discussion chapter should be carefully drafted to ensure that the results mentioned in your research align with your research question, aims, and objectives.

Considering the importance of this chapter for all students working on their dissertations, we have comprehensive guidelines on how to write a dissertation discussion chapter.

The discussion and  conclusion  chapters often overlap. Depending on your university, you may be asked to group these two sections in one chapter – Discussion and Conclusion.

In some cases, the results and discussion are put together under the Results and Discussion chapter. Here are some dissertation examples of working out the best structure for your dissertation.

Alternatively, you can look for the required  dissertation structure in your handbook  or consult your supervisor.

Steps of How to Write Dissertation Discussion Chapter

1. provide a summary of your findings.

Start your discussion by summarising the key findings of your research questions. Avoid repeating the information you have already stated in the previous chapters.

You will be expected to clearly express your interpretation of results to answer the research questions established initially in one or two paragraphs.

Here are some  examples of how to present the summary of your findings ;

• “The data suggests that”,
• “The results confirm that”,
• “The analysis indicates that”,
• “The research shows a relationship between”, etc.

2. Interpretations of Results

Your audience will expect you to provide meanings of the results, although they might seem obvious to you. The results and their interpretations should be linked to the research questions so the reader can understand the value your research has added to the literature.

There are many ways of interpreting the data, but your chosen approach to interpreting the data will depend on the  type of research involved . Some of the most common strategies employed include;

• Describing how and why you ended up with unexpected findings and explaining their importance in detail
• Relating your findings with previous studies conducted
• Explaining your position with logical arguments when/if any alternative explanations are suggested
• An in-depth discussion around whether or not the findings answered your research questions and successfully tested the hypothesis

Examples of how you can start your interpretation in the Discussion chapter are –

• “Findings of this study contradict those of Allen et al. (2014) that”,
• “Contrary to the hypothesized association,” “Confirming the hypothesis…”,
• “The findings confirm that A is….. even though Allen et al. (2014) and Michael (2012) suggested B was …..”

3. Implications of your Study

What practical and theoretical implications will your study have for other researchers and the scientific community as a whole?

It is vital to relate your results to the knowledge in the existing literature so the readers can establish how your research will contribute to the existing data.

When thinking of the possible consequences of your findings, you should ask yourself these;

• Are your findings in line with previous studies? What contribution did your research make to them?
• Why are your results entirely different from other studies on the same topic?
• Did your findings approve or contradict existing knowledge?
• What are the practical implications of your study?

Remember that as the researcher, you should aim to let your readers know why your study will contribute to the existing literature. Possible ways of starting this particular section are;

• “The findings show that A….. whereas Lee (2017) and John (2013) suggested that B”, “The results of this study completely contradict the claims made in theories”,
• “These results are not in line with the theoretical perspectives”,
• “The statistical analysis provides a new understanding of the relationship between A and B”,
• “Future studies should take into consideration the findings of this study because”

“Improve your work’s language, structure, style, and overall quality. Get help from our experienced dissertation editors to improve the quality of your paper to First Class Standard. Click here to learn more about our Dissertation, Editing, and Improvement Services .

Looking for dissertation help?

Researchprospect to the rescue, then.

We have expert writers on our team who are skilled at helping students with dissertations across various disciplines. Guaranteeing 100% satisfaction!

4. Recognise the Limitations of your Research

Almost every academic research has some limitations. Acknowledging them will only add to your credibility as a scientific researcher.

In addition to the possible human errors, it’s important to take into account other factors that might have influenced the results of your study, including but not limited to unexpected research obstacles, specific methodological choices , and the overall research design.

Avoid mentioning any limitations that may not be relevant to your research aim, but clearly state the limitations that may have affected your results.

For example, if you used a sample size that included a tiny population, you may not generalise your results.

Similarly, obstacles faced in collecting data from the participants can influence the findings of your study. Make a note of all such  research limitations , but explain to the reader why your results are still authentic.

• The small sample size limited the generalisability of the results.
• The authenticity of the findings may have been influenced by….
• The obstacles in collecting data resulted in…
• It is beyond the framework of this research…

5. Provide Recommendations for Future Research

The limitations of your research work directly result in future recommendations. However, it should be noted that your recommendations for future research work should include the areas that your own work could not report so other researchers can build on them.

Sometimes the recommendations are a part of the  conclusion chapter . Some examples;

• More research is needed to be performed….

The Purpose of Dissertation Discussion Chapter 

Remember that the discussion section of a dissertation is the heart of your research because a) it will indicate your stance on the topic of research, and b) it answers the research questions initially established in the Introduction chapter .

Every piece of information you present here will add value to the existing literature within your field of study. How you structured your findings in the preceding chapter will help you determine the best structure for your dissertation discussion section.

For example, it might be logical to structure your analysis/discussions by theme if you chose the pattern in your findings section.

But generally, discussion based on research questions is the more widely used  structure  in academia because this pattern clearly indicates how you have addressed the aim of your research.

Most UK universities require the supervisor or committee members to comment on the extent to which each research question has been answered. You will be doing them a great favour if you structure your discussion so that each research question is laid out separately.

Irrespective of whether you are  writing an essay, dissertation, or  chapter of a dissertation , all pieces of writing should start with an  introduction .

Once your readers have read through your study results, you might want to highlight the contents of the subsequent discussion as an introduction paragraph (summary of your results – as explained above).

Likewise, the discussion chapter is expected to end with a concluding paragraph – allowing you the opportunity to summarise your interpretations.

The dissertation analysis & discussion chapter is usually very long, so it will make sense to emphasise the critical points in a concluding paragraph so the reader can grasp the essential information. This will also help to make sure the reader understands your analysis.

Also Read:   Research Discussion Of Findings

Useful Tips 

Presentation of graphs, tables, and figures.

In the 1990s and early 2000s, students spent days creating graphs and charts for their  statistical analysis work . Thanks to technology, you can produce even more accurate graphs and figures today in a shorter period.

Using  Microsoft Word, STATA, SPSS, Microsoft Excel  and other statistical analysis software, we can now draw  beautiful-looking figures, tables , and graphs with just a few clicks and make them appear in our document at the desired place. But there are downsides to being too dependent on technology.

Many students make the common mistake of using colours to represent variables when really they have to print their dissertation paper final copy in black and white.

Any colours on graphs and figures will eventually be viewed in the grayscale presentation. Recognizing different shades of grey on the same chart or graph can sometimes be a little confusing.

For example, green and purple appear as pretty much the same shade of grey on a line chat, meaning your chart will become unreadable to the marker.

Another trap you may fall into is the unintentional stuffing   of the dissertation chapter with graphs and figures. Even though it is essential to show numbers and statistics, you don’t want to overwhelm your readers with too many.

It may not be necessary to have a graph/table under each sub-heading. Only you can best judge whether or not you need to have a graph/table under a particular sub-heading as the writer.

Relating to Previous Chapters  

As a student, it can be challenging to develop your own analysis and discussion of results. One of the excellent discussion chapter requirements is to showcase your ability to relate previous research to your research results.

Avoid repeating the same information over and over. Many students fall into this trap which negatively affects the mark of their overall dissertation paper .

Concise and to-the-point information will help you effectively convey your point to the readers.

Although you must demonstrate how your findings relate to previous research, it is equally important to ensure you are not simply rewriting what has already been said in the introduction  and  literature review  chapters.

The best strategy is to use examples from previous sections to postulate an argument.

Hyperlinks are recommended to take the reader from one section to another. This is especially important for submitting electronic documents as .word or .pdf files. Hyperlinking is tedious and time-consuming, so you should allow for this in your dissertation timeline to avoid rushing in the closing stages.

Also read: How to Write the Abstract for the Dissertation.

Using Subsections and Subheadings

You might want to reflect on the structure of the discussion in your organizstion of the dissertation discussion chapter, and for that, you will need to create sub-sections.

It is essential to keep subsections to the point and as short as possible. Use a layer of subheadings if possible.

For example

Subsection 4.1 of Chapter 4- Discussion can be further divided into sections 4.1.1 and 4.2.2. After three numerical layers (4.1.1, 4.2.2, and 4.2.3), any subheadings need not appear in the contents table.

The titles of all subsections will appear on your table of contents  so choose the wordings carefully. A title too long or too short might confuse the reader. A one or two-word subheading will not give the reader enough information to understand the section.

Likewise, using a research question or long sentences in the subheading is not recommended. It might help to examine how other researchers and writers create these subheadings.

Critical Thinking

Your critical thinking skills are the crux of your dissertation discussion chapter. You will do yourself a great disservice if you fail to put the critical thinking element into the equation.

After all, this exercise aims to showcase clarity in your thoughts and arguments. Markers of the dissertation give more importance to the analysis  and discussion chapter. But you could be marked negatively if this particular chapter lacks critical thinking.

Many students struggle to distinguish between fundamental descriptive analysis and critical thinking with their opinions on the research topic.

Critical thinking is a skill developed over time, and it might be daunting for you to come to terms with the idea of critical thinking and its use in your analysis. But even if you are no expert, you must try your best.

“Still unsure about  how to write a dissertation discussion chapter ? Why not take advantage of our  UK-based dissertation writing service ? Your dissertation is essential to your degree, so you cannot risk failing it.

With our custom writing service , you are guaranteed to have all your dissertation paper elements put into the right place. Our expert academics can help you with your full dissertation paper or a part of it.  Click here to learn more about our dissertation services.

Duplication of Content

Another critical error students make reaffirming the point the graph/chart was supposed to make. Writing out the same information as presented in the graph defeats the whole purpose of having them in the first place.

You will be expected to form your opinions and arguments based on the findings (as presented by the graphs), so keep an eye on this mistake. Finally, avoid simply inserting a graph without any explanation whatsoever.

It should be noted that there is no correct or incorrect number of charts/figures one can use in the dissertation findings and discussion chapter. A balance must be struck.

Avoid Over Interpretation

This is a major no-no when writing a dissertation discussion. Do not make an argument that isn’t backed by your collected data.

The results and interpretations that cannot be supported should not be mentioned. Your research will be deemed unauthentic and will also be questioned by your supervisor if you do so. Results should be interpreted without any bias.

How to Write the Findings of a Dissertation.

Do not Speculate

Speculation in the  discussion chapter of your dissertation is discouraged. Your dissertation’s discussion is based on your collected data and how it relates to your research questions. Thus, speculating here will undoubtedly undermine your research’s credibility.

Also, try not to generalise your findings. If your research is based on a specific population, do not state that the same findings might apply in every case. As indicated previously, it is essential to acknowledge the limitations of your research.

On the other hand, if you think your discussion needs to address other populations as well, start your sentence like this ‘We speculate that..’ or ‘It is speculated that..’ This will keep you from getting into any trouble.

What are the elements of the Dissertation Discussion?

The list of the main elements of the discussion chapter are:

• Implications : Why are your findings important to academic and scientific communities, and what purpose would they serve?
• Future Recommendations: Advice for other researchers and scientists who explore the topic further in future.

What are the steps of writing a Dissertation Discussion Chapter?

• Write a summary of the findings
• Provide a summary of your findings
• Interpretations of Results
• Recognise the Limitations of your research
• Provide Recommendations for Future Research.

Can we use graphs and charts in the Dissertation Discussion Chapter?

Yes, using graphs to aid your statistical results and enhance presentation is essential, but do not overwhelm it with a lot of graphs in multiple colours. 

You May Also Like

Not sure how to write the findings of a dissertation. Here are some comprehensive guidelines for you to learn to write a flawless findings chapter.

This article is a step-by-step guide to how to write statement of a problem in research. The research problem will be half-solved by defining it correctly.

A list of glossary in a dissertation contains all the terms that were used in your dissertation but the meanings of which may not be obvious to the readers.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

How to Write an Impressive Thesis Results Section

After collecting and analyzing your research data, it’s time to write the results section. This article explains how to write and organize the thesis results section, the differences in reporting qualitative and quantitative data, the differences in the thesis results section across different fields, and the best practices for tables and figures.

What is the thesis results section?

The thesis results section factually and concisely describes what was observed and measured during the study but does not interpret the findings. It presents the findings in a logical order.

What should the thesis results section include?

• Include all relevant results as text, tables, or figures
• Report the results of subject recruitment and data collection
• For qualitative research, present the data from all statistical analyses, whether or not the results are significant
• For quantitative research, present the data by coding or categorizing themes and topics
• Present all secondary findings (e.g., subgroup analyses)
• Include all results, even if they do not fit in with your assumptions or support your hypothesis

What should the thesis results section not include?

• If the study involves the thematic analysis of an interview, don’t include complete transcripts of all interviews. Instead, add these as appendices
• Don’t present raw data. These may be included in appendices
• Don’t include background information (this should be in the introduction section )
• Don’t speculate on the meaning of results that do not support your hypothesis. This will be addressed later in the discussion and conclusion sections.
• Don’t repeat results that have been presented in tables and figures. Only highlight the pertinent points or elaborate on specific aspects

How should the thesis results section be organized?

The opening paragraph of the thesis results section should briefly restate the thesis question. Then, present the results objectively as text, figures, or tables.

Quantitative research presents the results from experiments and  statistical tests , usually in the form of tables and figures (graphs, diagrams, and images), with any pertinent findings emphasized in the text. The results are structured around the thesis question. Demographic data are usually presented first in this section.

For each statistical test used, the following information must be mentioned:

• The type of analysis used (e.g., Mann–Whitney U test or multiple regression analysis)
• A concise summary of each result, including  descriptive statistics   (e.g., means, medians, and modes) and  inferential statistics   (e.g., correlation, regression, and  p  values) and whether the results are significant
• Any trends or differences identified through comparisons
• How the findings relate to your research and if they support or contradict your hypothesis

Qualitative research   presents results around key themes or topics identified from your data analysis and explains how these themes evolved. The data are usually presented as text because it is hard to present the findings as figures.

For each theme presented, describe:

• General trends or patterns observed
• Significant or representative responses
• Relevant quotations from your study subjects

Relevant characteristics about your study subjects

Differences among the results section in different fields of research

Nevertheless, results should be presented logically across all disciplines and reflect the thesis question and any hypotheses that were tested.

The presentation of results varies considerably across disciplines. For example, a thesis documenting how a particular population interprets a specific event and a thesis investigating customer service may both have collected data using interviews and analyzed it using similar methods. Still, the presentation of the results will vastly differ because they are answering different thesis questions. A science thesis may have used experiments to generate data, and these would be presented differently again, probably involving statistics. Nevertheless, results should be presented logically across all disciplines and reflect the thesis question and any  hypotheses that were tested.

Differences between reporting thesis results in the Sciences and the Humanities and Social Sciences (HSS) domains

In the Sciences domain (qualitative and experimental research), the results and discussion sections are considered separate entities, and the results from experiments and statistical tests are presented. In the HSS domain (qualitative research), the results and discussion sections may be combined.

There are two approaches to presenting results in the HSS field:

• If you want to highlight important findings, first present a synopsis of the results and then explain the key findings.
• If you have multiple results of equal significance, present one result and explain it. Then present another result and explain that, and so on. Conclude with an overall synopsis.

Best practices for using tables and figures

The use of figures and tables is highly encouraged because they provide a standalone overview of the research findings that are much easier to understand than wading through dry text mentioning one result after another. The text in the results section should not repeat the information presented in figures and tables. Instead, it should focus on the pertinent findings or elaborate on specific points.

Some popular software programs that can be used for the analysis and presentation of statistical data include  Statistical Package for the Social Sciences (SPSS ) ,  R software ,  MATLAB , Microsoft Excel,  Statistical Analysis Software (SAS) ,  GraphPad Prism , and  Minitab .

The easiest way to construct tables is to use the  Table function in Microsoft Word . Microsoft Excel can also be used; however, Word is the easier option.

General guidelines for figures and tables

• Figures and tables must be interpretable independent from the text
• Number tables and figures consecutively (in separate lists) in the order in which they are mentioned in the text
• All tables and figures must be cited in the text
• Provide clear, descriptive titles for all figures and tables
• Include a legend to concisely describe what is presented in the figure or table

Figure guidelines

• Label figures so that the reader can easily understand what is being shown
• Use a consistent font type and font size for all labels in figure panels
• All abbreviations used in the figure artwork should be defined in the figure legend

Table guidelines

• All table columns should have a heading abbreviation used in tables should be defined in the table footnotes
• All numbers and text presented in tables must correlate with the data presented in the manuscript body

Quantitative results example : Figure 3 presents the characteristics of unemployed subjects and their rate of criminal convictions. A statistically significant association was observed between unemployed people <20 years old, the male sex, and no household income.

Qualitative results example: Table 5 shows the themes identified during the face-to-face interviews about the application that we developed to anonymously report corruption in the workplace. There was positive feedback on the app layout and ease of use. Concerns that emerged from the interviews included breaches of confidentiality and the inability to report incidents because of unstable cellphone network coverage.

Table 5. Themes and selected quotes from the evaluation of our app designed to anonymously report workplace corruption.

Tips for writing the thesis results section

• Do not state that a difference was present between the two groups unless this can be supported by a significant  p-value .
• Present the findings only . Do not comment or speculate on their interpretation.
• Every result included  must have a corresponding method in the methods section. Conversely, all methods  must have associated results presented in the results section.
• Do not explain commonly used methods. Instead, cite a reference.
• Be consistent with the units of measurement used in your thesis study. If you start with kg, then use the same unit all throughout your thesis. Also, be consistent with the capitalization of units of measurement. For example, use either “ml” or “mL” for milliliters, but not both.
• Never manipulate measurement outcomes, even if the result is unexpected. Remain objective.

Results vs. discussion vs. conclusion

Results are presented in three sections of your thesis: the results, discussion, and conclusion.

• In the results section, the data are presented simply and objectively. No speculation or interpretation is given.
• In the discussion section, the meaning of the results is interpreted and put into context (e.g., compared with other findings in the literature ), and its importance is assigned.
• In the conclusion section, the results and the main conclusions are summarized.

A thesis is the most crucial document that you will write during your academic studies. For professional thesis editing and thesis proofreading services , visit Enago Thesis Editing for more information.

Editor’s pick

Get free updates.

Subscribe to our newsletter for regular insights from the research and publishing industry!

Review Checklist

Have you  completed all data collection procedures and analyzed all results ?

Have you  included all results relevant to your thesis question, even if they do not support your hypothesis?

Have you reported the results  objectively , with no interpretation or speculation?

For quantitative research, have you included both  descriptive and  inferential statistical results and stated whether they support or contradict your hypothesis?

Have you used  tables and figures to present all results?

In your thesis body, have you presented only the pertinent results and elaborated on specific aspects that were presented in the tables and figures?

Are all tables and figures  correctly labeled and cited in numerical order in the text?

Frequently Asked Questions

What file formats do you accept +.

We accept all file formats, including Microsoft Word, Microsoft Excel, PDF, Latex, etc.

How to identify whether paraphrasing is required? +

We provide a report entailing recommendations for a single Plagiarism Check service. You can also write to us at [email protected] for further assistance as paraphrasing is sold offline and has a relatively high conversion in most geographies. 

What information do i need to provide? +

Please upload your research manuscript when you place the order. If you want to include the tables, charts, and figure legends in the plagiarism check, please ensure that all content is in editable formats and in one single document. 

Is repetition percentage of 25-30% considered acceptable by the journal for my manuscript? +

Acceptable repetition rate varies by journal but aim for low percentages (usually <5%). Avoid plagiarism, cite sources, and use detection tools. High plagiarism can lead to rejection, reputation damage, and serious consequences. Consult your institution for guidance on addressing plagiarism concerns.

Do you offer help to rewrite and paraphrase the plagiarized text in my manuscript? +

We can certainly help you rewrite and paraphrase text in your manuscript to ensure it is not plagiarized under our Developmental Content rewriting service.  You can provide specific passages or sentences that you suspect may be plagiarized, and we can assist you in rephrasing them to ensure originality. 

Which international languages does iThenticate have content for in its database? +

iThenticate searches for content matches in the following 30 languages: Chinese (Simplified and Traditional), Japanese, Thai, Korean, Catalan, Croatian, Czech, Danish, Dutch, Finnish, French, German, Hungarian, Italian, Norwegian (Bokmal, Nynorsk), Polish, Portuguese, Romanian, Serbian, Slovak, Slovenian, Spanish, Swedish, Arabic, Greek, Hebrew, Farsi, Russian, and Turkish. Please note that iThenticate will match your text with text of the same language.

  [email protected]

• English English Spanish German French Turkish

How to Write a Perfect Discussion Chapter for a PhD Thesis

Discussion chapter of a PhD thesis focuses on explaining and analyzing what you have researched, presenting how it is associated with the existing literature. It is also a place for argument supporting your entire discussion. We often find that people seek thesis writing help from experienced editing and proofreading services to prepare a flawless PhD discussion chapter. However, following 9 essential tips can help you design a perfect PhD thesis with an excellent discussion chapter.

This article provides 9 effective tips for writing a flawless discussion chapter for a PhD thesis. To give you an opportunity to practice proofreading, we have left a few spelling, punctuation, or grammatical errors in the text. See if you can spot them! If you spot the errors correctly, you will be entitled to a 10% discount.

Writing a flawless PhD thesis requires much more than only subject matter expertise. It requires expertise, experience, and in-depth thinking, along with sharp intelligence. Though most students add a discussion chapter in their thesis or dissertation, many of them end up messing up the essay or missing out the central issues.

A discussion chapter in a PhD thesis is a place where you have the chance to delving into the analysis, importance, and relevance of your research. This section focuses on explaining and analyzing what you have researched, presenting how it is associated with the existing literature. It is also a place for argument supporting your entire discussion. We often find that people seek thesis writing help from experienced editing and proofreading services to prepare a flawless PhD discussion chapter. However, the following 9 essential tips can help you design a perfect PhD thesis with an excellent discussion chapter.

1. Understand the objective of your PhD thesis

Before setting out to conduct a PhD thesis, researchers design and plan a study with objective(s) in mind. Such objectives inform how the dissertation is conducted. For example, no researcher would just commence by administering questionnaires or setting up laboratory equipment without an objective. It also informs the questions and necessary procedures to undertake. To write a well-conveyed discussion section in PhD thesis, the author must review and ascertain whether the conducted study addressed these objectives. It takes the understanding of the objective to assess the achievement of the objective clearly. Based on the assessment, the author finds the direction of his discussion. The comprehension of this objective is critical to crafting a focused discussion section in scholarly writing.

2. Determine a clear structure

The first step in organizing a perfect discussion chapter for a PhD thesis is to divide them into separate sections that move from a particular result to implications. However, depending on your PhD thesis topics, you may utilize the followings:

Analyze and summarize your main findings.

Evaluate how the results reflect the literature review.

Show if the discussion impacts the original hypothesis and, if yes, how it affects your hypothesis.

3. Usage of grammar and tense

The proper usage of grammar and tense is a key to a seamless PhD thesis. The improper use of grammar and tense can have the worst impact on the entire dissertation, along with the discussion chapter . Depending on the context, the usage of past and present tense should be made. When you are referring to specific data, the present tense can be used. For instance, when the light increases, speed decreases. However, while summarizing the result or concluding something, past tense can be used. For example, between 2013 and 2016, the number of car accidents decreased visibly. However, depending on the context, you can combine two tenses. Also, bear in mind that different manuals might require different tenses.

The tense adopted by the study should be uniform. Try to write the discussion chapter of your PhD thesis in the required tense format of your guideline. For instance, The  APA Publication Manual  provides suggestions on which verb tense is appropriate for various sections of a thesis:

Past tense or present perfect tense for the literature review and "the description of the procedure if the discussion is of past events."

"Use past tense to describe the "

"Use the present tense to discuss the implications of the results and to present the conclusions. By reporting conclusions in the present tense, you allow all readers to join you in deliberating the matter at hand."

As much as possible, try to be consistent with your chosen verb tense within a section as doing so "can help ensure smooth expression."

It is always best to check with your manual to get their opinion on the best approach for your thesis.

4. Referring to hypotheses and literature review

The primary purpose of referring to the literature review is to contextualize your discussion chapter as a part of the debate. For instance, suppose you introduce a theory claiming that speed cameras have zero effect on a road’s fatalities. You need to describe how your findings relate to this assumption. The same applies while making a hypothesis. Never forget this fact while discussing your results.

5. Evaluate your results and compare them with existing studies

While writing the discussion chapter of your PhD thesis, you need to analyze your results rather than just simplifying it. Don’t forget to do complete research on if your results agree or conflict with the previous studies.  You need to evaluate if there are any differences and, if yes, what the differences are. Comparing the development with existing studies helps your research to connect any existing debate. It also offers a solid base of conclusions.

In a well-written discussion chapter of a PhD thesis, an author should compare his/her findings with those of other studies reported in the literature. This aspect is different from a literature review in the sense that the author has data at hand to compare, as against the general overview made about a thesis’s objectives prior to the investigation. In comparing, the author is able to pronounce the authenticity of the results, especially when similar procedures were used in other studies. Any differences in findings can be explained using the different peculiarities between the author’s study and others. If this consideration is carefully made and implemented, the author may likely find evidence-based explanations for his/her findings. Even for novel findings, an author may still find relevant literature that formed the rudiments of the present study to discuss the progress, contribution, and novel dimension of the study. 

6. Why should the findings of your PhD thesis matter?  

After discussing the study results, the author, as part of his goal, must propose the impact of the study’s findings on the problem that informed the idea of the thesis. The reader will be better served if the author describes a roadmap for solving the problem based on the findings. Depending on the nature of the problem, an author may propose solutions to affect policy, behavioral change, or conventional practice. Only after making this contribution will a discussion section expose readers to the specific and general impacts of a PhD thesis.

7. Understand the limitation of your research

It is one of the most important things to evaluate when writing a discussion chapter for your PhD thesis. The discussion chapter of your research paper should involve some acknowledgment of the study limitations. Suppose you have critically assessed similar studies in the literature review; you are free to compare your work against their weakness or strength.

8. Don’t be afraid to be unique

The focus on research may change and evolve with time if you are working on a long-term project. The key to adjusting the focus on the literature review is to reflect these changes. Suppose you may find that specific themes are more prominent than others; it is helpful if you review your literature review and tweak them to emphasize the themes. Never be afraid to be unique to bring the changes.

9. Don’t forget to avail a professional thesis editing and proofreading service

Last but not least, you can seek assistance from professional editing and proofreading services. Taking PhD thesis help from professional editing and proofreading services doesn’t only facilitate the writing process but also helps you execute a flawless PhD thesis with a well-formed and informative discussion chapter. When highly qualified writers take responsibility for your research paper, you don’t need to worry about structure, consistency, flow, tone, grammar, and accuracy.

Writing a PhD thesis is not an easy task. However, systematic thinking and structure can make the process easier. From the introduction to the demonstration of your argument, literature review, and analysis of the result, everything is vital to prepare an outstanding PhD thesis. However, if you want to seek assistance from a professional editing and proofreading service provider to write a seamless discussion chapter and thesis, feel free to contact us. We will be happy to help you.

Why choose Best Edit & Proof for thesis editing and proofreading services

If you need thesis/dissertation editing or proofreading, our services are always credible and highly approved by recognized scholars and researchers. Our editing and proofreading experts adhere to all the guidelines and rules from all eminent universities. All the editors and proofreaders are seasoned doctorally qualified scholars with experience in editing and proofreading manuscripts. Therefore, any students can avail of unmatched thesis editing and proofreading service from Best Edit & Proof.

 If you need us to make your thesis and dissertation shine, contact us unhesitatingly! 

Best Edit & Proof expert editors and proofreaders focus on offering manuscripts with proper tone, content, and style of  academic writing,  and also provide an upscale  editing and proofreading service  for you. If you consider our pieces of advice, you will witness a notable increase in the chance for your research manuscript to be accepted by the publishers. We work together as an academic writing style guide by bestowing subject-area editing and proofreading around several categorized styles of writing. With the group of our expert editors, you will always find us all set to help you identify the tone and style that your manuscript needs to get a nod from the publishers.

English thesis/dissertation formatting service

You can also avail of our assistance if you are looking for editors who can format your manuscript, or just check on the  particular styles  for the formatting task as per the guidelines provided to you, e.g.,  APA,  MLA, or Chicago/Turabian styles. Best Edit & Proof editors and proofreaders provide all sorts of academic writing help, including editing and proofreading services, using our user-friendly website, and a streamlined ordering process.

Get a free quote for thesis/dissertation editing and proofreading now!

Kindly visit our  order page  if you want our subject-area editors or language experts to work on your manuscript to improve its tone and style and give it a perfect academic tone and style through proper editing and proofreading. The process of submitting a paper is very easy and quick. Click here to find out how it  works.

Our pricing is based on the type of service you avail of here, be it editing or proofreading. We charge on the basis of the word count of your manuscript that you submit for editing and proofreading and the turnaround time it takes to get it done. If you want to get an instant price quote for your project, copy and paste your document or enter your word count into our  pricing calculator.

24/7 customer support | Live support

Contact us to get support with academic editing and proofreading. We have an active live chat module to offer you direct support along with qualified editors to refine and furbish your manuscript.

Stay tuned for updated information about editing and proofreading services!

Follow us on  Twitter,  LinkedIn,    Facebook,  Instagram,  and  Medium .

For more posts, click  here.  

• Editing & Proofreading
• Citation Styles
• Grammar Rules
• Academic Writing
• Proofreading
• Microsoft Tools
• Academic Publishing
• Dissertation & Thesis
• Researching
• Job & Research Application

Similar Posts

How to Determine Variability in a Dataset

How to Determine Central Tendency

How to Specify Study Variables in Research Papers?

Population vs Sample | Sampling Methods for a Dissertation

How to Ensure the Quality of Academic Writing in a Thesis and Dissertation?

How to Avoid Anthropomorphism in Your Dissertation?

How to Write a Research Methodology Section for a Dissertation and Thesis

How to Write a Theoretical Framework for a Dissertation and Thesis?

How to Write Literature Review for a Dissertation and Thesis

How to Write a Dissertation and Thesis Introduction

Recent Posts

ANOVA vs MANOVA: Which Method to Use in Dissertations?

They Also Read

After a concise overture of the concerned discipline in the introductory section of a research paper or dissertation, the literature review should begin by delineating the significance of and the most critical works in that discipline. This handout provides six easy-to-follow steps for an impeccable literature review.

Writing an academic paper is not similar to other forms of writing. It requires patience, knowledge, and the use of proper sentence construction. An academic paper should be informative, polished, and well structured. As a student or researcher, you should learn about bad habits and not repeat them in your academic writing. In this article, we discuss 6 bad habits to avoid in academic writing.

Academic writing should be free of all errors and grammatical mistakes to ensure accuracy and professionalism. However, now and then, you come across an error while correcting your work that makes it all extremely difficult — dangling modifiers. What exactly are these, and how can you fix dangling modifiers so that your piece of academic work is perfect in all sense? Don’t worry, as we have the perfect guide to help you through it. In this article, we will cover how you can masterfully eliminate them.

Essays are a principal component of academic writing. Scholars and students need to write a plethora of essays on a recurring basis as a core requirement of their research or curricula. Depending on the writing purpose, these essays can be persuasive, narrative, descriptive, or expository. This article expounds on expository essays and suggests some helpful steps to write an expository essay.

Anthropomorphism can be defined as attributing human characteristics to nonhuman entities, objects, or concepts. It may lead to ambiguity or misleading communication. Therefore, avoiding anthropomorphism in your thesis, dissertation, or article would be best.

Finding a dataset's middle or average is critical and involves measuring central tendency. The central tendency's most common measures include the mode, median, and mean. The mode is the most repeated measure in a data set.

The central tendency, mean, median, and mode depict where most data points concentrate, while variability illustrates how far they are. It is exceedingly crucial because the amount of variability demonstrates the generalization one can make from the sample to the population. Low variability is desirable because it implies that predicting information about the population using sample data is well-justified. Contrarily, high variability illustrates decreased consistency, making data predictions harder.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write a Results Section | Tips & Examples

How to Write a Results Section | Tips & Examples

Published on 27 October 2016 by Bas Swaen . Revised on 25 October 2022 by Tegan George.

A results section is where you report the main findings of the data collection and analysis you conducted for your thesis or dissertation . You should report all relevant results concisely and objectively, in a logical order. Don’t include subjective interpretations of why you found these results or what they mean – any evaluation should be saved for the discussion section .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

How to write a results section, reporting quantitative research results, reporting qualitative research results, results vs discussion vs conclusion, checklist: research results, frequently asked questions about results sections.

When conducting research, it’s important to report the results of your study prior to discussing your interpretations of it. This gives your reader a clear idea of exactly what you found and keeps the data itself separate from your subjective analysis.

Here are a few best practices:

• Your results should always be written in the past tense.
• While the length of this section depends on how much data you collected and analysed, it should be written as concisely as possible.
• Only include results that are directly relevant to answering your research questions . Avoid speculative or interpretative words like ‘appears’ or ‘implies’.
• If you have other results you’d like to include, consider adding them to an appendix or footnotes.
• Always start out with your broadest results first, and then flow into your more granular (but still relevant) ones. Think of it like a shoe shop: first discuss the shoes as a whole, then the trainers, boots, sandals, etc.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

If you conducted quantitative research , you’ll likely be working with the results of some sort of statistical analysis .

Your results section should report the results of any statistical tests you used to compare groups or assess relationships between variables . It should also state whether or not each hypothesis was supported.

The most logical way to structure quantitative results is to frame them around your research questions or hypotheses. For each question or hypothesis, share:

• A reminder of the type of analysis you used (e.g., a two-sample t test or simple linear regression ). A more detailed description of your analysis should go in your methodology section.
• A concise summary of each relevant result, both positive and negative. This can include any relevant descriptive statistics (e.g., means and standard deviations ) as well as inferential statistics (e.g., t scores, degrees of freedom , and p values ). Remember, these numbers are often placed in parentheses.
• A brief statement of how each result relates to the question, or whether the hypothesis was supported. You can briefly mention any results that didn’t fit with your expectations and assumptions, but save any speculation on their meaning or consequences for your discussion  and conclusion.

A note on tables and figures

In quantitative research, it’s often helpful to include visual elements such as graphs, charts, and tables , but only if they are directly relevant to your results. Give these elements clear, descriptive titles and labels so that your reader can easily understand what is being shown. If you want to include any other visual elements that are more tangential in nature, consider adding a figure and table list .

As a rule of thumb:

• Tables are used to communicate exact values, giving a concise overview of various results
• Graphs and charts are used to visualise trends and relationships, giving an at-a-glance illustration of key findings

Don’t forget to also mention any tables and figures you used within the text of your results section. Summarise or elaborate on specific aspects you think your reader should know about rather than merely restating the same numbers already shown.

Figure 1: Intention to donate to environmental organisations based on social distance from impact of environmental damage.

In qualitative research , your results might not all be directly related to specific hypotheses. In this case, you can structure your results section around key themes or topics that emerged from your analysis of the data.

For each theme, start with general observations about what the data showed. You can mention:

• Recurring points of agreement or disagreement
• Patterns and trends
• Particularly significant snippets from individual responses

Next, clarify and support these points with direct quotations. Be sure to report any relevant demographic information about participants. Further information (such as full transcripts , if appropriate) can be included in an appendix .

‘I think that in role-playing games, there’s more attention to character design, to world design, because the whole story is important and more attention is paid to certain game elements […] so that perhaps you do need bigger teams of creative experts than in an average shooter or something.’

Responses suggest that video game consumers consider some types of games to have more artistic potential than others.

Your results section should objectively report your findings, presenting only brief observations in relation to each question, hypothesis, or theme.

It should not  speculate about the meaning of the results or attempt to answer your main research question . Detailed interpretation of your results is more suitable for your discussion section , while synthesis of your results into an overall answer to your main research question is best left for your conclusion .

Prevent plagiarism, run a free check.

I have completed my data collection and analyzed the results.

I have included all results that are relevant to my research questions.

I have concisely and objectively reported each result, including relevant descriptive statistics and inferential statistics .

I have stated whether each hypothesis was supported or refuted.

I have used tables and figures to illustrate my results where appropriate.

All tables and figures are correctly labelled and referred to in the text.

There is no subjective interpretation or speculation on the meaning of the results.

You've finished writing up your results! Use the other checklists to further improve your thesis.

The results chapter of a thesis or dissertation presents your research results concisely and objectively.

In quantitative research , for each question or hypothesis , state:

• The type of analysis used
• Relevant results in the form of descriptive and inferential statistics
• Whether or not the alternative hypothesis was supported

In qualitative research , for each question or theme, describe:

• Recurring patterns
• Significant or representative individual responses
• Relevant quotations from the data

Don’t interpret or speculate in the results chapter.

Results are usually written in the past tense , because they are describing the outcome of completed actions.

The results chapter or section simply and objectively reports what you found, without speculating on why you found these results. The discussion interprets the meaning of the results, puts them in context, and explains why they matter.

In qualitative research , results and discussion are sometimes combined. But in quantitative research , it’s considered important to separate the objective results from your interpretation of them.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

Swaen, B. (2022, October 25). How to Write a Results Section | Tips & Examples. Scribbr. Retrieved 14 May 2024, from https://www.scribbr.co.uk/thesis-dissertation/results-section/

Is this article helpful?

Other students also liked

What is a research methodology | steps & tips, how to write a discussion section | tips & examples, how to write a thesis or dissertation conclusion.

Tips for writing a PhD dissertation: FAQs answered

From how to choose a topic to writing the abstract and managing work-life balance through the years it takes to complete a doctorate, here we collect expert advice to get you through the PhD writing process

Campus team

Additional links.

• More on this topic

You may also like

Popular resources

.css-1txxx8u{overflow:hidden;max-height:81px;text-indent:0px;} Rather than restrict the use of AI, embrace the challenge

Emotions and learning: what role do emotions play in how and why students learn, leveraging llms to assess soft skills in lifelong learning, how hard can it be testing ai detection tools, a diy guide to starting your own journal.

Embarking on a PhD is “probably the most challenging task that a young scholar attempts to do”, write Mark Stephan Felix and Ian Smith in their practical guide to dissertation and thesis writing. After years of reading and research to answer a specific question or proposition, the candidate will submit about 80,000 words that explain their methods and results and demonstrate their unique contribution to knowledge. Here are the answers to frequently asked questions about writing a doctoral thesis or dissertation.

What’s the difference between a dissertation and a thesis?

Whatever the genre of the doctorate, a PhD must offer an original contribution to knowledge. The terms “dissertation” and “thesis” both refer to the long-form piece of work produced at the end of a research project and are often used interchangeably. Which one is used might depend on the country, discipline or university. In the UK, “thesis” is generally used for the work done for a PhD, while a “dissertation” is written for a master’s degree. The US did the same until the 1960s, says Oxbridge Essays, when the convention switched, and references appeared to a “master’s thesis” and “doctoral dissertation”. To complicate matters further, undergraduate long essays are also sometimes referred to as a thesis or dissertation.

The Oxford English Dictionary defines “thesis” as “a dissertation, especially by a candidate for a degree” and “dissertation” as “a detailed discourse on a subject, especially one submitted in partial fulfilment of the requirements of a degree or diploma”.

• Ten platinum rules for PhD supervisors
• Fostering freedom in PhD students: how supervisors can shape accessible paths for doctoral research
• Lessons from students on effective research supervision

The title “doctor of philosophy”, incidentally, comes from the degree’s origins, write Dr Felix, an associate professor at Mahidol University in Thailand, and Dr Smith, retired associate professor of education at the University of Sydney , whose co-authored guide focuses on the social sciences. The PhD was first awarded in the 19th century by the philosophy departments of German universities, which at that time taught science, social science and liberal arts.

How long should a PhD thesis be?

A PhD thesis (or dissertation) is typically 60,000 to 120,000 words ( 100 to 300 pages in length ) organised into chapters, divisions and subdivisions (with roughly 10,000 words per chapter) – from introduction (with clear aims and objectives) to conclusion.

The structure of a dissertation will vary depending on discipline (humanities, social sciences and STEM all have their own conventions), location and institution. Examples and guides to structure proliferate online. The University of Salford , for example, lists: title page, declaration, acknowledgements, abstract, table of contents, lists of figures, tables and abbreviations (where needed), chapters, appendices and references.

A scientific-style thesis will likely need: introduction, literature review, materials and methods, results, discussion, bibliography and references.

As well as checking the overall criteria and expectations of your institution for your research, consult your school handbook for the required length and format (font, layout conventions and so on) for your dissertation.

A PhD takes three to four years to complete; this might extend to six to eight years for a part-time doctorate.

What are the steps for completing a PhD?

Before you get started in earnest , you’ll likely have found a potential supervisor, who will guide your PhD journey, and done a research proposal (which outlines what you plan to research and how) as part of your application, as well as a literature review of existing scholarship in the field, which may form part of your final submission.

In the UK, PhD candidates undertake original research and write the results in a thesis or dissertation, says author and vlogger Simon Clark , who posted videos to YouTube throughout his own PhD journey . Then they submit the thesis in hard copy and attend the viva voce (which is Latin for “living voice” and is also called an oral defence or doctoral defence) to convince the examiners that their work is original, understood and all their own. Afterwards, if necessary, they make changes and resubmit. If the changes are approved, the degree is awarded.

The steps are similar in Australia , although candidates are mostly assessed on their thesis only; some universities may include taught courses, and some use a viva voce. A PhD in Australia usually takes three years full time.

In the US, the PhD process begins with taught classes (similar to a taught master’s) and a comprehensive exam (called a “field exam” or “dissertation qualifying exam”) before the candidate embarks on their original research. The whole journey takes four to six years.

A PhD candidate will need three skills and attitudes to get through their doctoral studies, says Tara Brabazon , professor of cultural studies at Flinders University in Australia who has written extensively about the PhD journey :

• master the academic foundational skills (research, writing, ability to navigate different modalities)
• time-management skills and the ability to focus on reading and writing
• determined motivation to do a PhD.

How do I choose the topic for my PhD dissertation or thesis?

It’s important to find a topic that will sustain your interest for the years it will take to complete a PhD. “Finding a sustainable topic is the most important thing you [as a PhD student] would do,” says Dr Brabazon in a video for Times Higher Education . “Write down on a big piece of paper all the topics, all the ideas, all the questions that really interest you, and start to cross out all the ones that might just be a passing interest.” Also, she says, impose the “Who cares? Who gives a damn?” question to decide if the topic will be useful in a future academic career.

The availability of funding and scholarships is also often an important factor in this decision, says veteran PhD supervisor Richard Godwin, from Harper Adams University .

Define a gap in knowledge – and one that can be questioned, explored, researched and written about in the time available to you, says Gina Wisker, head of the Centre for Learning and Teaching at the University of Brighton. “Set some boundaries,” she advises. “Don’t try to ask everything related to your topic in every way.”

James Hartley, research professor in psychology at Keele University, says it can also be useful to think about topics that spark general interest. If you do pick something that taps into the zeitgeist, your findings are more likely to be noticed.

You also need to find someone else who is interested in it, too. For STEM candidates , this will probably be a case of joining a team of people working in a similar area where, ideally, scholarship funding is available. A centre for doctoral training (CDT) or doctoral training partnership (DTP) will advertise research projects. For those in the liberal arts and social sciences, it will be a matter of identifying a suitable supervisor .

Avoid topics that are too broad (hunger across a whole country, for example) or too narrow (hunger in a single street) to yield useful solutions of academic significance, write Mark Stephan Felix and Ian Smith. And ensure that you’re not repeating previous research or trying to solve a problem that has already been answered. A PhD thesis must be original.

What is a thesis proposal?

After you have read widely to refine your topic and ensure that it and your research methods are original, and discussed your project with a (potential) supervisor, you’re ready to write a thesis proposal , a document of 1,500 to 3,000 words that sets out the proposed direction of your research. In the UK, a research proposal is usually part of the application process for admission to a research degree. As with the final dissertation itself, format varies among disciplines, institutions and countries but will usually contain title page, aims, literature review, methodology, timetable and bibliography. Examples of research proposals are available online.

How to write an abstract for a dissertation or thesis

The abstract presents your thesis to the wider world – and as such may be its most important element , says the NUI Galway writing guide. It outlines the why, how, what and so what of the thesis . Unlike the introduction, which provides background but not research findings, the abstract summarises all sections of the dissertation in a concise, thorough, focused way and demonstrates how well the writer understands their material. Check word-length limits with your university – and stick to them. About 300 to 500 words is a rough guide ­– but it can be up to 1,000 words.

The abstract is also important for selection and indexing of your thesis, according to the University of Melbourne guide , so be sure to include searchable keywords.

It is the first thing to be read but the last element you should write. However, Pat Thomson , professor of education at the University of Nottingham , advises that it is not something to be tackled at the last minute.

How to write a stellar conclusion

As well as chapter conclusions, a thesis often has an overall conclusion to draw together the key points covered and to reflect on the unique contribution to knowledge. It can comment on future implications of the research and open up new ideas emanating from the work. It is shorter and more general than the discussion chapter , says online editing site Scribbr, and reiterates how the work answers the main question posed at the beginning of the thesis. The conclusion chapter also often discusses the limitations of the research (time, scope, word limit, access) in a constructive manner.

It can be useful to keep a collection of ideas as you go – in the online forum DoctoralWriting SIG , academic developer Claire Aitchison, of the University of South Australia , suggests using a “conclusions bank” for themes and inspirations, and using free-writing to keep this final section fresh. (Just when you feel you’ve run out of steam.) Avoid aggrandising or exaggerating the impact of your work. It should remind the reader what has been done, and why it matters.

How to format a bibliography (or where to find a reliable model)

Most universities use a preferred style of references , writes THE associate editor Ingrid Curl. Make sure you know what this is and follow it. “One of the most common errors in academic writing is to cite papers in the text that do not then appear in the bibliography. All references in your thesis need to be cross-checked with the bibliography before submission. Using a database during your research can save a great deal of time in the writing-up process.”

A bibliography contains not only works cited explicitly but also those that have informed or contributed to the research – and as such illustrates its scope; works are not limited to written publications but include sources such as film or visual art.

Examiners can start marking from the back of the script, writes Dr Brabazon. “Just as cooks are judged by their ingredients and implements, we judge doctoral students by the calibre of their sources,” she advises. She also says that candidates should be prepared to speak in an oral examination of the PhD about any texts included in their bibliography, especially if there is a disconnect between the thesis and the texts listed.

Can I use informal language in my PhD?

Don’t write like a stereotypical academic , say Kevin Haggerty, professor of sociology at the University of Alberta , and Aaron Doyle, associate professor in sociology at Carleton University , in their tongue-in-cheek guide to the PhD journey. “If you cannot write clearly and persuasively, everything about PhD study becomes harder.” Avoid jargon, exotic words, passive voice and long, convoluted sentences – and work on it consistently. “Writing is like playing guitar; it can improve only through consistent, concerted effort.”

Be deliberate and take care with your writing . “Write your first draft, leave it and then come back to it with a critical eye. Look objectively at the writing and read it closely for style and sense,” advises THE ’s Ms Curl. “Look out for common errors such as dangling modifiers, subject-verb disagreement and inconsistency. If you are too involved with the text to be able to take a step back and do this, then ask a friend or colleague to read it with a critical eye. Remember Hemingway’s advice: ‘Prose is architecture, not interior decoration.’ Clarity is key.”

How often should a PhD candidate meet with their supervisor?

Since the PhD supervisor provides a range of support and advice – including on research techniques, planning and submission – regular formal supervisions are essential, as is establishing a line of contact such as email if the candidate needs help or advice outside arranged times. The frequency varies according to university, discipline and individual scholars.

Once a week is ideal, says Dr Brabazon. She also advocates a two-hour initial meeting to establish the foundations of the candidate-supervisor relationship .

The University of Edinburgh guide to writing a thesis suggests that creating a timetable of supervisor meetings right at the beginning of the research process will allow candidates to ensure that their work stays on track throughout. The meetings are also the place to get regular feedback on draft chapters.

“A clear structure and a solid framework are vital for research,” writes Dr Godwin on THE Campus . Use your supervisor to establish this and provide a realistic view of what can be achieved. “It is vital to help students identify the true scientific merit, the practical significance of their work and its value to society.”

How to proofread your dissertation (what to look for)

Proofreading is the final step before printing and submission. Give yourself time to ensure that your work is the best it can be . Don’t leave proofreading to the last minute; ideally, break it up into a few close-reading sessions. Find a quiet place without distractions. A checklist can help ensure that all aspects are covered.

Proofing is often helped by a change of format – so it can be easier to read a printout rather than working off the screen – or by reading sections out of order. Fresh eyes are better at spotting typographical errors and inconsistencies, so leave time between writing and proofreading. Check with your university’s policies before asking another person to proofread your thesis for you.

As well as close details such as spelling and grammar, check that all sections are complete, all required elements are included , and nothing is repeated or redundant. Don’t forget to check headings and subheadings. Does the text flow from one section to another? Is the structure clear? Is the work a coherent whole with a clear line throughout?

Ensure consistency in, for example, UK v US spellings, capitalisation, format, numbers (digits or words, commas, units of measurement), contractions, italics and hyphenation. Spellchecks and online plagiarism checkers are also your friend.

How do you manage your time to complete a PhD dissertation?

Treat your PhD like a full-time job, that is, with an eight-hour working day. Within that, you’ll need to plan your time in a way that gives a sense of progress . Setbacks and periods where it feels as if you are treading water are all but inevitable, so keeping track of small wins is important, writes A Happy PhD blogger Luis P. Prieto.

Be specific with your goals – use the SMART acronym (specific, measurable, attainable, relevant and timely).

And it’s never too soon to start writing – even if early drafts are overwritten and discarded.

“ Write little and write often . Many of us make the mistake of taking to writing as one would take to a sprint, in other words, with relatively short bursts of intense activity. Whilst this can prove productive, generally speaking it is not sustainable…In addition to sustaining your activity, writing little bits on a frequent basis ensures that you progress with your thinking. The comfort of remaining in abstract thought is common; writing forces us to concretise our thinking,” says Christian Gilliam, AHSS researcher developer at the University of Cambridge ’s Centre for Teaching and Learning.

Make time to write. “If you are more alert early in the day, find times that suit you in the morning; if you are a ‘night person’, block out some writing sessions in the evenings,” advises NUI Galway’s Dermot Burns, a lecturer in English and creative arts. Set targets, keep daily notes of experiment details that you will need in your thesis, don’t confuse writing with editing or revising – and always back up your work.

What work-life balance tips should I follow to complete my dissertation?

During your PhD programme, you may have opportunities to take part in professional development activities, such as teaching, attending academic conferences and publishing your work. Your research may include residencies, field trips or archive visits. This will require time-management skills as well as prioritising where you devote your energy and factoring in rest and relaxation. Organise your routine to suit your needs , and plan for steady and regular progress.

How to deal with setbacks while writing a thesis or dissertation

Have a contingency plan for delays or roadblocks such as unexpected results.

Accept that writing is messy, first drafts are imperfect, and writer’s block is inevitable, says Dr Burns. His tips for breaking it include relaxation to free your mind from clutter, writing a plan and drawing a mind map of key points for clarity. He also advises feedback, reflection and revision: “Progressing from a rough version of your thoughts to a superior and workable text takes time, effort, different perspectives and some expertise.”

“Academia can be a relentlessly brutal merry-go-round of rejection, rebuttal and failure,” writes Lorraine Hope , professor of applied cognitive psychology at the University of Portsmouth, on THE Campus. Resilience is important. Ensure that you and your supervisor have a relationship that supports open, frank, judgement-free communication.

If you would like advice and insight from academics and university staff delivered direct to your inbox each week, sign up for the Campus newsletter .

Authoring a PhD Thesis: How to Plan, Draft, Write and Finish a Doctoral Dissertation (2003), by Patrick Dunleavy

Writing Your Dissertation in Fifteen Minutes a Day: A Guide to Starting, Revising, and Finishing Your Doctoral Thesis (1998), by Joan Balker

Challenges in Writing Your Dissertation: Coping with the Emotional, Interpersonal, and Spiritual Struggles (2015), by Noelle Sterne

Rather than restrict the use of AI, embrace the challenge

Let’s think about assessments and ai in a different way, how students’ genai skills affect assignment instructions, how not to land a job in academia, contextual learning: linking learning to the real world, three steps to unearth the hidden curriculum of networking.

Register for free

and unlock a host of features on the THE site

• Manuscript Preparation

Know How to Structure Your PhD Thesis

• 4 minute read
• 34.8K views

Table of Contents

In your academic career, few projects are more important than your PhD thesis. Unfortunately, many university professors and advisors assume that their students know how to structure a PhD. Books have literally been written on the subject, but there’s no need to read a book in order to know about PhD thesis paper format and structure. With that said, however, it’s important to understand that your PhD thesis format requirement may not be the same as another student’s. The bottom line is that how to structure a PhD thesis often depends on your university and department guidelines.

But, let’s take a look at a general PhD thesis format. We’ll look at the main sections, and how to connect them to each other. We’ll also examine different hints and tips for each of the sections. As you read through this toolkit, compare it to published PhD theses in your area of study to see how a real-life example looks.

Main Sections of a PhD Thesis

In almost every PhD thesis or dissertation, there are standard sections. Of course, some of these may differ, depending on your university or department requirements, as well as your topic of study, but this will give you a good idea of the basic components of a PhD thesis format.

• Abstract : The abstract is a brief summary that quickly outlines your research, touches on each of the main sections of your thesis, and clearly outlines your contribution to the field by way of your PhD thesis. Even though the abstract is very short, similar to what you’ve seen in published research articles, its impact shouldn’t be underestimated. The abstract is there to answer the most important question to the reviewer. “Why is this important?”
• Introduction : In this section, you help the reviewer understand your entire dissertation, including what your paper is about, why it’s important to the field, a brief description of your methodology, and how your research and the thesis are laid out. Think of your introduction as an expansion of your abstract.
• Literature Review : Within the literature review, you are making a case for your new research by telling the story of the work that’s already been done. You’ll cover a bit about the history of the topic at hand, and how your study fits into the present and future.
• Theory Framework : Here, you explain assumptions related to your study. Here you’re explaining to the review what theoretical concepts you might have used in your research, how it relates to existing knowledge and ideas.
• Methods : This section of a PhD thesis is typically the most detailed and descriptive, depending of course on your research design. Here you’ll discuss the specific techniques you used to get the information you were looking for, in addition to how those methods are relevant and appropriate, as well as how you specifically used each method described.
• Results : Here you present your empirical findings. This section is sometimes also called the “empiracles” chapter. This section is usually pretty straightforward and technical, and full of details. Don’t shortcut this chapter.
• Discussion : This can be a tricky chapter, because it’s where you want to show the reviewer that you know what you’re talking about. You need to speak as a PhD versus a student. The discussion chapter is similar to the empirical/results chapter, but you’re building on those results to push the new information that you learned, prior to making your conclusion.
• Conclusion : Here, you take a step back and reflect on what your original goals and intentions for the research were. You’ll outline them in context of your new findings and expertise.

Tips for your PhD Thesis Format

As you put together your PhD thesis, it’s easy to get a little overwhelmed. Here are some tips that might keep you on track.

• Don’t try to write your PhD as a first-draft. Every great masterwork has typically been edited, and edited, and…edited.
• Work with your thesis supervisor to plan the structure and format of your PhD thesis. Be prepared to rewrite each section, as you work out rough drafts. Don’t get discouraged by this process. It’s typical.
• Make your writing interesting. Academic writing has a reputation of being very dry.
• You don’t have to necessarily work on the chapters and sections outlined above in chronological order. Work on each section as things come up, and while your work on that section is relevant to what you’re doing.
• Don’t rush things. Write a first draft, and leave it for a few days, so you can come back to it with a more critical take. Look at it objectively and carefully grammatical errors, clarity, logic and flow.
• Know what style your references need to be in, and utilize tools out there to organize them in the required format.
• It’s easier to accidentally plagiarize than you think. Make sure you’re referencing appropriately, and check your document for inadvertent plagiarism throughout your writing process.

PhD Thesis Editing Plus

Want some support during your PhD writing process? Our PhD Thesis Editing Plus service includes extensive and detailed editing of your thesis to improve the flow and quality of your writing. Unlimited editing support for guaranteed results. Learn more here , and get started today!

• Publication Process

Journal Acceptance Rates: Everything You Need to Know

• Publication Recognition

How to Make a PowerPoint Presentation of Your Research Paper

You may also like.

Make Hook, Line, and Sinker: The Art of Crafting Engaging Introductions

Can Describing Study Limitations Improve the Quality of Your Paper?

A Guide to Crafting Shorter, Impactful Sentences in Academic Writing

6 Steps to Write an Excellent Discussion in Your Manuscript

How to Write Clear and Crisp Civil Engineering Papers? Here are 5 Key Tips to Consider

The Clear Path to An Impactful Paper: ②

The Essentials of Writing to Communicate Research in Medicine

Changing Lines: Sentence Patterns in Academic Writing

Input your search keywords and press Enter.

Get science-backed answers as you write with Paperpal's Research feature

How to Write a Successful Book Chapter for an Academic Publication?

If you are an academic or a researcher working towards a PhD degree or engaged in various tasks in a university or academic institution the idea of writing a book chapter would have definitely crossed your mind. Receiving an invitation to write an academic book chapter is indeed a great honor, and going onto write it is a milestone that every writer aims to achieve in their career. Writing a successful academic book chapter requires careful planning and execution by the author. In this article we will look at how to write an academic book chapter along with a few key steps that must be followed during the writing process.  

Table of Contents

• What is an academic book chapter? 

Information collection

Finalizing chapter structure, attractive chapter title, a strong introduction, detailing out the chapter, summarizing the chapter, what is an academic book chapter.

An academic book chapter is a distinct section of a book having its own title or a chapter number. A book consists of several chapters, each of which focuses on a particular topic or sub-argument that is linked to the overall theme of the book. In other words, each chapter should have a sound argument that is consistent with the central theme or argument of the book. Each chapter should therefore be an inter-connected part to the rest of the chapters and to the overall book. 

It is important to understand that an academic book chapter is very different from a thesis chapter. While a book chapter has as its audience anyone who may be interested in the particular topic, the audience for a thesis chapter is primarily the thesis examiner. For the same reason, a thesis examiner will closely read the entire chapter and thesis, but this may not be the case for a book chapter. As mentioned earlier, a book chapter deals with a specific topic with an important idea or argument related to the central theme of the book and hence it is a separate division of a book. On the other hand, a thesis chapter does not stand separately but will have multiple arguments and relies on the other chapters to make it a complete whole. The length of each academic book chapter normally varies and there is no standard rule as to the length of chapters. However, on a general note, chapter length usually varies from 3500 to 5000 words.  

Key steps to follow when writing an academic book chapter

Integrating the following steps as you plan to write an academic book chapter can help you achieve excellent results.  

It is important that sufficient research is carried out and the author has a thorough understanding of the available literature in the field. Collecting relevant information and being up to date with all aspects on the topic that you are going to write about is one of first steps in writing an academic book chapter. Presenting information in a visually attractive manner and using various tools like mind maps can help in structuring the key arguments better.  

An academic book chapter also requires a good outline. For example, you must have a title, a well worded introduction, informative paras that make up the main body, a chapter summary and a neat transition to the succeeding chapter. Try to make the outline clear and concise, organize your ideas effectively and ensure there is a logical flow.  

This is a critical element and goes a long way in getting people to read your chapter or even pick up the book. Strive to make the title or heading of your chapter interesting and impactful, potential readers should be attracted to the title by itself, going on to pick up the book just by the vigor of the title itself.  

Having a well written introduction can be invaluable in ensuring that audiences will be compelled to read further. Engaging your reader with an anecdote or a dialogue or through a fictional account or plot can be useful devices to anchor the introduction on.  

Ideally as you elaborate on your chapter with the key points as you begin, it is a good idea to provide evidence for your statements and arguments. Try to highlight these in about 4 to 5 paragraphs linking it to the chapter details. 

A concise summary is a must as you come to the end of your chapter. Remember, here you are reflecting on the main content of the chapter and helping the reader to take away some key aspects of the arguments that you have presented in the chapter.  

Paperpal is a comprehensive AI writing toolkit that helps students and researchers achieve 2x the writing in half the time. It leverages 21+ years of STM experience and insights from millions of research articles to provide in-depth academic writing, language editing, and submission readiness support to help you write better, faster.  

Get accurate academic translations, rewriting support, grammar checks, vocabulary suggestions, and generative AI assistance that delivers human precision at machine speed. Try for free or upgrade to Paperpal Prime starting at US$19 a month to access premium features, including consistency, plagiarism, and 30+ submission readiness checks to help you succeed.  

Experience the future of academic writing – Sign up to Paperpal and start writing for free!  

Related Reads:

Measuring academic success: definition & strategies for excellence.

• Publish or Perish – Understanding the Importance of Scholarly Publications in Academia
• What is a Literature Review? How to Write It (with Examples)
• Paperpal’s New AI Research Finder Empowers Authors to Research, Write, Cite, All in One Place

Academic Editing: How to Self-Edit Academic Text With Paperpal 

How paperpal is enhancing academic productivity and accelerating research in china, you may also like, how to write a high-quality conference paper, how paperpal’s research feature helps you develop and..., what are scholarly sources and where can you..., how to write a hypothesis types and examples , why traditional editorial process needs an upgrade, paperpal’s new ai research finder empowers authors to..., ai + human expertise – a paradigm shift..., how to use paperpal to generate emails &..., is it ethical to use ai-generated abstracts without....

UNT Dallas grad writing new chapter with Masters in Criminal Justice degree

The pomp and circumstance of college graduation is upon UNT Dallas this week.

Grad student, Angelica Gossett-Azbell got her Masters of Science in Criminal Justice. It's a subject that hits close to home.

"That's me visiting my mom in prison," Gossett-Azbell said scrolling through pictures on her phone. "Everyone kind of expected me to follow the trail my parents took. So it's still kind of hard to carry that."

The Oak Cliff native grew up in the Child Protective Services system. Gossett-Azbell said both her mother and father spent time in and out of prison for drug-related crimes.

"Knowing that my parents took shortcuts really bothered me that they didn't think about the consequences," Gossett-Azbell said. "So that really propelled me to further my education and want to do Criminal Justice."

Gossett-Azbell said she chose Criminal Justice because she wants to help children like she once was.

"Because they can see that someone that came where they came from can do it," Gossett-Azbell said. "I really feel that education was my parent. It taught me a lot of fundamentals, and it laid down a foundation that I needed that I never had."

At a hooding ceremony on Friday, Gossett-Azbell had a mentor, her husband and her father in the audience watching.

"He really changed his life and it felt so secure to have him there," Gossett-Azbell said of her father. "It felt overwhelming; in a good way."

Her mother could not attend. "She's incarcerated for the third time for selling drugs," Gossett-Azbell said. Her mother is expected to be released from prison soon.

Gossett-Azbell wants to continue her education to get her PhD to be a professor one day.

"It's one of the best feelings that I know," Gossett-Azbell said of her degree. "I'm secure, so the stability is there and no one can ever take that from me."

Gossett-Azbell will participate in the UNT Dallas Commencement Ceremony on Tuesday, March 14.