what should a dissertation include

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 408 other subscribers.

Email Address

Writing your dissertation - structure and sections

Posted in: dissertations

In this post, we look at the structural elements of a typical dissertation. Your department may wish you to include additional sections but the following covers all core elements you will need to work on when designing and developing your final assignment.

The table below illustrates a classic dissertation layout with approximate lengths for each section.

Hopkins, D. and Reid, T., 2018.  The Academic Skills Handbook: Your Guid e to Success in Writing, Thinking and Communicating at University . Sage.

Your title should be clear, succinct and tell the reader exactly what your dissertation is about. If it is too vague or confusing, then it is likely your dissertation will be too vague and confusing. It is important therefore to spend time on this to ensure you get it right, and be ready to adapt to fit any changes of direction in your research or focus.

In the following examples, across a variety of subjects, you can see how the students have clearly identified the focus of their dissertation, and in some cases target a problem that they will address:

An econometric analysis of the demand for road transport within the united Kingdom from  1965 to 2000

To what extent does payment card fraud affect UK bank profitability and bank stakeholders?  Does this justify fraud prevention?

A meta-analysis of implant materials for intervertebral disc replacement and regeneration.

The role of ethnic institutions in social development; the case of Mombasa, Kenya.

Why haven’t biomass crops been adopted more widely as a source of renewable energy in the United Kingdom?

Mapping the criminal mind: Profiling and its limitation.

The Relative Effectiveness of Interferon Therapy for Chronic Hepatitis C

Under what conditions did the European Union exhibit leadership in international climate change negotiations from 1992-1997, 1997-2005 and 2005-Copenhagen respectively?

The first thing your reader will read (after the title) is your abstract. However, you need to write this last. Your abstract is a summary of the whole project, and will include aims and objectives, methods, results and conclusions. You cannot write this until you have completed your write-up.

Introduction

Your introduction should include the same elements found in most academic essay or report assignments, with the possible inclusion of research questions. The aim of the introduction is to set the scene, contextualise your research, introduce your focus topic and research questions, and tell the reader what you will be covering.  It should move from the general  and work towards the specific. You should include the following:

• Attention-grabbing statement (a controversy, a topical issue, a contentious view, a recent problem etc)
• Background and context
• Introduce the topic, key theories, concepts, terms of reference, practices, (advocates and critic)
• Introduce the problem and focus of your research
• Set out your research question(s) (this could be set out in a separate section)
• Your approach to answering your research questions.

Literature review

Your literature review is the section of your report where you show what is already known about the area under investigation and demonstrate the need for your particular study. This is a significant section in your dissertation (30%) and you should allow plenty of time to carry out a thorough exploration of your focus topic and use it to help you identify a specific problem and formulate your research questions.

You should approach the literature review with the critical analysis dial turned up to full volume. This is not simply a description, list, or summary  of everything you have read. Instead, it is a synthesis of your reading, and should include analysis and evaluation of readings, evidence, studies and data, cases, real world applications and views/opinions expressed.  Your supervisor is looking for this detailed critical approach in your literature review, where you unpack sources, identify strengths and weaknesses and find gaps in the research.

In other words, your literature review is your opportunity to show the reader why your paper is important and your research is significant, as it addresses the gap or on-going issue you have uncovered.

You need to tell the reader what was done. This means describing the research methods and explaining your choice. This will include information on the following:

• Are your methods qualitative or quantitative... or both? And if so, why?
• Who (if any) are the participants?
• Are you analysing any documents, systems, organisations? If so what are they and why are you analysing them?
• What did you do first, second, etc?
• What ethical considerations are there?

It is a common style convention to write what was done rather than what you did, and write it so that someone else would be able to replicate your study.

Here you describe what you have found out. You need to identify the most significant patterns in your data, and use tables and figures to support your description. Your tables and figures are a visual representation of your findings, but remember to describe what they show in your writing. There should be no critical analysis in this part (unless you have combined results and discussion sections).

Here you show the significance of your results or findings. You critically analyse what they mean, and what the implications may be. Talk about any limitations to your study, evaluating the strengths and weaknesses of your own research, and make suggestions for further studies to build on your findings. In this section, your supervisor will expect you to dig deep into your findings and critically evaluate what they mean in relation to previous studies, theories, views and opinions.

This is a summary of your project, reminding the reader of the background to your study, your objectives, and showing how you met them. Do not include any new information that you have not discussed before.

This is the list of all the sources you have cited in your dissertation. Ensure you are consistent and follow the conventions for the particular referencing system you are using. (Note: you shouldn't include books you've read but do not appear in your dissertation).

Include any extra information that your reader may like to read. It should not be essential for your reader to read them in order to understand your dissertation. Your appendices should be labelled (e.g. Appendix A, Appendix B, etc). Examples of material for the appendices include detailed data tables (summarised in your results section), the complete version of a document you have used an extract from, etc.

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

I am finding this helpful. Thank You.

It is very useful.

Glad you found it useful Adil!

I was a useful post i would like to thank you

Glad you found it useful! 🙂

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

How to write an undergraduate university dissertation

Writing a dissertation is a daunting task, but these tips will help you prepare for all the common challenges students face before deadline day.

Grace McCabe

Writing a dissertation is one of the most challenging aspects of university. However, it is the chance for students to demonstrate what they have learned during their degree and to explore a topic in depth.

In this article, we look at 10 top tips for writing a successful dissertation and break down how to write each section of a dissertation in detail.

10 tips for writing an undergraduate dissertation

1. Select an engaging topic Choose a subject that aligns with your interests and allows you to showcase the skills and knowledge you have acquired through your degree.

2. Research your supervisor Undergraduate students will often be assigned a supervisor based on their research specialisms. Do some research on your supervisor and make sure that they align with your dissertation goals.

3. Understand the dissertation structure Familiarise yourself with the structure (introduction, review of existing research, methodology, findings, results and conclusion). This will vary based on your subject.

4. Write a schedule As soon as you have finalised your topic and looked over the deadline, create a rough plan of how much work you have to do and create mini-deadlines along the way to make sure don’t find yourself having to write your entire dissertation in the final few weeks.

5. Determine requirements Ensure that you know which format your dissertation should be presented in. Check the word count and the referencing style.

6. Organise references from the beginning Maintain an alphabetically arranged reference list or bibliography in the designated style as you do your reading. This will make it a lot easier to finalise your references at the end.

7. Create a detailed plan Once you have done your initial research and have an idea of the shape your dissertation will take, write a detailed essay plan outlining your research questions, SMART objectives and dissertation structure.

8. Keep a dissertation journal Track your progress, record your research and your reading, and document challenges. This will be helpful as you discuss your work with your supervisor and organise your notes.

9. Schedule regular check-ins with your supervisor Make sure you stay in touch with your supervisor throughout the process, scheduling regular meetings and keeping good notes so you can update them on your progress.

10. Employ effective proofreading techniques Ask friends and family to help you proofread your work or use different fonts to help make the text look different. This will help you check for missing sections, grammatical mistakes and typos.

What is a dissertation?

A dissertation is a long piece of academic writing or a research project that you have to write as part of your undergraduate university degree.

It’s usually a long essay in which you explore your chosen topic, present your ideas and show that you understand and can apply what you’ve learned during your studies. Informally, the terms “dissertation” and “thesis” are often used interchangeably.

How do I select a dissertation topic?

First, choose a topic that you find interesting. You will be working on your dissertation for several months, so finding a research topic that you are passionate about and that demonstrates your strength in your subject is best. You want your topic to show all the skills you have developed during your degree. It would be a bonus if you can link your work to your chosen career path, but it’s not necessary.

Second, begin by exploring relevant literature in your field, including academic journals, books and articles. This will help you identify gaps in existing knowledge and areas that may need further exploration. You may not be able to think of a truly original piece of research, but it’s always good to know what has already been written about your chosen topic.

Consider the practical aspects of your chosen topic, ensuring that it is possible within the time frame and available resources. Assess the availability of data, research materials and the overall practicality of conducting the research.

When picking a dissertation topic, you also want to try to choose something that adds new ideas or perspectives to what’s already known in your field. As you narrow your focus, remember that a more targeted approach usually leads to a dissertation that’s easier to manage and has a bigger impact. Be ready to change your plans based on feedback and new information you discover during your research.

How to work with your dissertation supervisor?

Your supervisor is there to provide guidance on your chosen topic, direct your research efforts, and offer assistance and suggestions when you have queries. It’s crucial to establish a comfortable and open line of communication with them throughout the process. Their knowledge can greatly benefit your work. Keep them informed about your progress, seek their advice, and don’t hesitate to ask questions.

1. Keep them updated Regularly tell your supervisor how your work is going and if you’re having any problems. You can do this through emails, meetings or progress reports.

2. Plan meetings Schedule regular meetings with your supervisor. These can be in person or online. These are your time to discuss your progress and ask for help.

3. Share your writing Give your supervisor parts of your writing or an outline. This helps them see what you’re thinking so they can advise you on how to develop it.

5. Ask specific questions When you need help, ask specific questions instead of general ones. This makes it easier for your supervisor to help you.

6. Listen to feedback Be open to what your supervisor says. If they suggest changes, try to make them. It makes your dissertation better and shows you can work together.

7. Talk about problems If something is hard or you’re worried, talk to your supervisor about it. They can give you advice or tell you where to find help.

8. Take charge Be responsible for your work. Let your supervisor know if your plans change, and don’t wait if you need help urgently.

Remember, talking openly with your supervisor helps you both understand each other better, improves your dissertation and ensures that you get the support you need.

How to write a successful research piece at university How to choose a topic for your dissertation Tips for writing a convincing thesis

How do I plan my dissertation?

It’s important to start with a detailed plan that will serve as your road map throughout the entire process of writing your dissertation. As Jumana Labib, a master’s student at the University of Manchester  studying digital media, culture and society, suggests: “Pace yourself – definitely don’t leave the entire thing for the last few days or weeks.”

Decide what your research question or questions will be for your chosen topic.

Break that down into smaller SMART (specific, measurable, achievable, relevant and time-bound) objectives.

Speak to your supervisor about any overlooked areas.

Create a breakdown of chapters using the structure listed below (for example, a methodology chapter).

Define objectives, key points and evidence for each chapter.

Define your research approach (qualitative, quantitative or mixed methods).

Outline your research methods and analysis techniques.

Develop a timeline with regular moments for review and feedback.

Allocate time for revision, editing and breaks.

Consider any ethical considerations related to your research.

Stay organised and add to your references and bibliography throughout the process.

Remain flexible to possible reviews or changes as you go along.

A well thought-out plan not only makes the writing process more manageable but also increases the likelihood of producing a high-quality piece of research.

How to structure a dissertation?

The structure can depend on your field of study, but this is a rough outline for science and social science dissertations:

Introduce your topic.

Complete a source or literature review.

Describe your research methodology (including the methods for gathering and filtering information, analysis techniques, materials, tools or resources used, limitations of your method, and any considerations of reliability).

Summarise your findings.

Discuss the results and what they mean.

Conclude your point and explain how your work contributes to your field.

On the other hand, humanities and arts dissertations often take the form of an extended essay. This involves constructing an argument or exploring a particular theory or analysis through the analysis of primary and secondary sources. Your essay will be structured through chapters arranged around themes or case studies.

All dissertations include a title page, an abstract and a reference list. Some may also need a table of contents at the beginning. Always check with your university department for its dissertation guidelines, and check with your supervisor as you begin to plan your structure to ensure that you have the right layout.

How long is an undergraduate dissertation?

The length of an undergraduate dissertation can vary depending on the specific guidelines provided by your university and your subject department. However, in many cases, undergraduate dissertations are typically about 8,000 to 12,000 words in length.

“Eat away at it; try to write for at least 30 minutes every day, even if it feels relatively unproductive to you in the moment,” Jumana advises.

How do I add references to my dissertation?

References are the section of your dissertation where you acknowledge the sources you have quoted or referred to in your writing. It’s a way of supporting your ideas, evidencing what research you have used and avoiding plagiarism (claiming someone else’s work as your own), and giving credit to the original authors.

Referencing typically includes in-text citations and a reference list or bibliography with full source details. Different referencing styles exist, such as Harvard, APA and MLA, each favoured in specific fields. Your university will tell you the preferred style.

Using tools and guides provided by universities can make the referencing process more manageable, but be sure they are approved by your university before using any.

How do I write a bibliography or list my references for my dissertation?

The requirement of a bibliography depends on the style of referencing you need to use. Styles such as OSCOLA or Chicago may not require a separate bibliography. In these styles, full source information is often incorporated into footnotes throughout the piece, doing away with the need for a separate bibliography section.

Typically, reference lists or bibliographies are organised alphabetically based on the author’s last name. They usually include essential details about each source, providing a quick overview for readers who want more information. Some styles ask that you include references that you didn’t use in your final piece as they were still a part of the overall research.

It is important to maintain this list as soon as you start your research. As you complete your research, you can add more sources to your bibliography to ensure that you have a comprehensive list throughout the dissertation process.

How to proofread an undergraduate dissertation?

Throughout your dissertation writing, attention to detail will be your greatest asset. The best way to avoid making mistakes is to continuously proofread and edit your work.

Proofreading is a great way to catch any missing sections, grammatical errors or typos. There are many tips to help you proofread:

Ask someone to read your piece and highlight any mistakes they find.

Change the font so you notice any mistakes.

Format your piece as you go, headings and sections will make it easier to spot any problems.

Separate editing and proofreading. Editing is your chance to rewrite sections, add more detail or change any points. Proofreading should be where you get into the final touches, really polish what you have and make sure it’s ready to be submitted.

Stick to your citation style and make sure every resource listed in your dissertation is cited in the reference list or bibliography.

How to write a conclusion for my dissertation?

Writing a dissertation conclusion is your chance to leave the reader impressed by your work.

Start by summarising your findings, highlighting your key points and the outcome of your research. Refer back to the original research question or hypotheses to provide context to your conclusion.

You can then delve into whether you achieved the goals you set at the beginning and reflect on whether your research addressed the topic as expected. Make sure you link your findings to existing literature or sources you have included throughout your work and how your own research could contribute to your field.

Be honest about any limitations or issues you faced during your research and consider any questions that went unanswered that you would consider in the future. Make sure that your conclusion is clear and concise, and sum up the overall impact and importance of your work.

Remember, keep the tone confident and authoritative, avoiding the introduction of new information. This should simply be a summary of everything you have already said throughout the dissertation.

You may also like

.css-185owts{overflow:hidden;max-height:54px;text-indent:0px;} How to use digital advisers to improve academic writing

How to deal with exam stress

Seeta Bhardwa

5 revision techniques to help you ace exam season (plus 7 more unusual approaches)

Register free and enjoy extra benefits

• Formatting Your Dissertation
• Introduction

Harvard Griffin GSAS strives to provide students with timely, accurate, and clear information. If you need help understanding a specific policy, please contact the office that administers that policy.

• Application for Degree
• Credit for Completed Graduate Work
• Ad Hoc Degree Programs
• Acknowledging the Work of Others
• Advanced Planning
• Dissertation Submission Checklist
• Publishing Options
• Submitting Your Dissertation
• English Language Proficiency
• PhD Program Requirements
• Secondary Fields
• Year of Graduate Study (G-Year)
• Master's Degrees
• Grade and Examination Requirements
• Conduct and Safety
• Financial Aid
• Non-Resident Students
• Registration

On this page:

Language of the Dissertation

Page and text requirements, body of text, tables, figures, and captions, dissertation acceptance certificate, copyright statement.

• Table of Contents

Front and Back Matter

Supplemental material, dissertations comprising previously published works, top ten formatting errors, further questions.

• Related Contacts and Forms

When preparing the dissertation for submission, students must follow strict formatting requirements. Any deviation from these requirements may lead to rejection of the dissertation and delay in the conferral of the degree.

The language of the dissertation is ordinarily English, although some departments whose subject matter involves foreign languages may accept a dissertation written in a language other than English.

Most dissertations are 100 to 300 pages in length. All dissertations should be divided into appropriate sections, and long dissertations may need chapters, main divisions, and subdivisions.

• 8½ x 11 inches, unless a musical score is included
• At least 1 inch for all margins
• Body of text: double spacing
• Block quotations, footnotes, and bibliographies: single spacing within each entry but double spacing between each entry
• Table of contents, list of tables, list of figures or illustrations, and lengthy tables: single spacing may be used

Fonts and Point Size

Use 10-12 point size. Fonts must be embedded in the PDF file to ensure all characters display correctly. 

Recommended Fonts

If you are unsure whether your chosen font will display correctly, use one of the following fonts: 

If fonts are not embedded, non-English characters may not appear as intended. Fonts embedded improperly will be published to DASH as-is. It is the student’s responsibility to make sure that fonts are embedded properly prior to submission. 

Instructions for Embedding Fonts

To embed your fonts in recent versions of Word, follow these instructions from Microsoft:

• Click the File tab and then click Options .
• In the left column, select the Save tab.
• Clear the Do not embed common system fonts check box.

For reference, below are some instructions from ProQuest UMI for embedding fonts in older file formats:

To embed your fonts in Microsoft Word 2010:

• In the File pull-down menu click on Options .
• Choose Save on the left sidebar.
• Check the box next to Embed fonts in the file.
• Click the OK button.
• Save the document.

Note that when saving as a PDF, make sure to go to “more options” and save as “PDF/A compliant”

To embed your fonts in Microsoft Word 2007:

• Click the circular Office button in the upper left corner of Microsoft Word.
• A new window will display. In the bottom right corner select Word Options . 
• Choose Save from the left sidebar.

Using Microsoft Word on a Mac:

Microsoft Word 2008 on a Mac OS X computer will automatically embed your fonts while converting your document to a PDF file.

If you are converting to PDF using Acrobat Professional (instructions courtesy of the Graduate Thesis Office at Iowa State University):  

• Open your document in Microsoft Word. 
• Click on the Adobe PDF tab at the top. Select "Change Conversion Settings." 
• Click on Advanced Settings. 
• Click on the Fonts folder on the left side of the new window. In the lower box on the right, delete any fonts that appear in the "Never Embed" box. Then click "OK." 
• If prompted to save these new settings, save them as "Embed all fonts." 
• Now the Change Conversion Settings window should show "embed all fonts" in the Conversion Settings drop-down list and it should be selected. Click "OK" again. 
• Click on the Adobe PDF link at the top again. This time select Convert to Adobe PDF. Depending on the size of your document and the speed of your computer, this process can take 1-15 minutes. 
• After your document is converted, select the "File" tab at the top of the page. Then select "Document Properties." 
• Click on the "Fonts" tab. Carefully check all of your fonts. They should all show "(Embedded Subset)" after the font name. 
•  If you see "(Embedded Subset)" after all fonts, you have succeeded.

The font used in the body of the text must also be used in headers, page numbers, and footnotes. Exceptions are made only for tables and figures created with different software and inserted into the document.

Tables and figures must be placed as close as possible to their first mention in the text. They may be placed on a page with no text above or below, or they may be placed directly into the text. If a table or a figure is alone on a page (with no narrative), it should be centered within the margins on the page. Tables may take up more than one page as long as they obey all rules about margins. Tables and figures referred to in the text may not be placed at the end of the chapter or at the end of the dissertation.

• Given the standards of the discipline, dissertations in the Department of History of Art and Architecture and the Department of Architecture, Landscape Architecture, and Urban Planning often place illustrations at the end of the dissertation.

Figure and table numbering must be continuous throughout the dissertation or by chapter (e.g., 1.1, 1.2, 2.1, 2.2, etc.). Two figures or tables cannot be designated with the same number. If you have repeating images that you need to cite more than once, label them with their number and A, B, etc. 

Headings should be placed at the top of tables. While no specific rules for the format of table headings and figure captions are required, a consistent format must be used throughout the dissertation (contact your department for style manuals appropriate to the field).

Captions should appear at the bottom of any figures. If the figure takes up the entire page, the caption should be placed alone on the preceding page, centered vertically and horizontally within the margins.

Each page receives a separate page number. When a figure or table title is on a preceding page, the second and subsequent pages of the figure or table should say, for example, “Figure 5 (Continued).” In such an instance, the list of figures or tables will list the page number containing the title. The word “figure” should be written in full (not abbreviated), and the “F” should be capitalized (e.g., Figure 5). In instances where the caption continues on a second page, the “(Continued)” notation should appear on the second and any subsequent page. The figure/table and the caption are viewed as one entity and the numbering should show correlation between all pages. Each page must include a header.

Landscape orientation figures and tables must be positioned correctly and bound at the top so that the top of the figure or table will be at the left margin. Figure and table headings/captions are placed with the same orientation as the figure or table when on the same page. When on a separate page, headings/captions are always placed in portrait orientation, regardless of the orientation of the figure or table. Page numbers are always placed as if the figure were vertical on the page.

If a graphic artist does the figures, Harvard Griffin GSAS will accept lettering done by the artist only within the figure. Figures done with software are acceptable if the figures are clear and legible. Legends and titles done by the same process as the figures will be accepted if they too are clear, legible, and run at least 10 or 12 characters per inch. Otherwise, legends and captions should be printed with the same font used in the text.

Original illustrations, photographs, and fine arts prints may be scanned and included, centered between the margins on a page with no text above or below.

Use of Third-Party Content

In addition to the student's own writing, dissertations often contain third-party content or in-copyright content owned by parties other than you, the student who authored the dissertation. The Office for Scholarly Communication recommends consulting the information below about fair use, which allows individuals to use in-copyright content, on a limited basis and for specific purposes, without seeking permission from copyright holders.

Because your dissertation will be made available for online distribution through DASH , Harvard's open-access repository, it is important that any third-party content in it may be made available in this way.

Fair Use and Copyright 

What is fair use?

Fair use is a provision in copyright law that allows the use of a certain amount of copyrighted material without seeking permission. Fair use is format- and media-agnostic. This means fair use may apply to images (including photographs, illustrations, and paintings), quoting at length from literature, videos, and music regardless of the format. 

How do I determine whether my use of an image or other third-party content in my dissertation is fair use?  

There are four factors you will need to consider when making a fair use claim.

1) For what purpose is your work going to be used?

• Nonprofit, educational, scholarly, or research use favors fair use. Commercial, non-educational uses, often do not favor fair use.
• A transformative use (repurposing or recontextualizing the in-copyright material) favors fair use. Examining, analyzing, and explicating the material in a meaningful way, so as to enhance a reader's understanding, strengthens your fair use argument. In other words, can you make the point in the thesis without using, for instance, an in-copyright image? Is that image necessary to your dissertation? If not, perhaps, for copyright reasons, you should not include the image.  

2) What is the nature of the work to be used?

• Published, fact-based content favors fair use and includes scholarly analysis in published academic venues. 
• Creative works, including artistic images, are afforded more protection under copyright, and depending on your use in light of the other factors, may be less likely to favor fair use; however, this does not preclude considerations of fair use for creative content altogether.

3) How much of the work is going to be used?  

• Small, or less significant, amounts favor fair use. A good rule of thumb is to use only as much of the in-copyright content as necessary to serve your purpose. Can you use a thumbnail rather than a full-resolution image? Can you use a black-and-white photo instead of color? Can you quote select passages instead of including several pages of the content? These simple changes bolster your fair use of the material.

4) What potential effect on the market for that work may your use have?

• If there is a market for licensing this exact use or type of educational material, then this weighs against fair use. If however, there would likely be no effect on the potential commercial market, or if it is not possible to obtain permission to use the work, then this favors fair use. 

For further assistance with fair use, consult the Office for Scholarly Communication's guide, Fair Use: Made for the Harvard Community and the Office of the General Counsel's Copyright and Fair Use: A Guide for the Harvard Community .

What are my options if I don’t have a strong fair use claim? 

Consider the following options if you find you cannot reasonably make a fair use claim for the content you wish to incorporate:

• Seek permission from the copyright holder. 
• Use openly licensed content as an alternative to the original third-party content you intended to use. Openly-licensed content grants permission up-front for reuse of in-copyright content, provided your use meets the terms of the open license.
• Use content in the public domain, as this content is not in-copyright and is therefore free of all copyright restrictions. Whereas third-party content is owned by parties other than you, no one owns content in the public domain; everyone, therefore, has the right to use it.

For use of images in your dissertation, please consult this guide to Finding Public Domain & Creative Commons Media , which is a great resource for finding images without copyright restrictions. 

Who can help me with questions about copyright and fair use?

Contact your Copyright First Responder . Please note, Copyright First Responders assist with questions concerning copyright and fair use, but do not assist with the process of obtaining permission from copyright holders.

Pages should be assigned a number except for the Dissertation Acceptance Certificate . Preliminary pages (abstract, table of contents, list of tables, graphs, illustrations, and preface) should use small Roman numerals (i, ii, iii, iv, v, etc.). All pages must contain text or images.  

Count the title page as page i and the copyright page as page ii, but do not print page numbers on either page .

For the body of text, use Arabic numbers (1, 2, 3, 4, 5, etc.) starting with page 1 on the first page of text. Page numbers must be centered throughout the manuscript at the top or bottom. Every numbered page must be consecutively ordered, including tables, graphs, illustrations, and bibliography/index (if included); letter suffixes (such as 10a, 10b, etc.) are not allowed. It is customary not to have a page number on the page containing a chapter heading.

• Check pagination carefully. Account for all pages.

A copy of the Dissertation Acceptance Certificate (DAC) should appear as the first page. This page should not be counted or numbered. The DAC will appear in the online version of the published dissertation. The author name and date on the DAC and title page should be the same. 

The dissertation begins with the title page; the title should be as concise as possible and should provide an accurate description of the dissertation. The author name and date on the DAC and title page should be the same. 

• Do not print a page number on the title page. It is understood to be page  i  for counting purposes only.

A copyright notice should appear on a separate page immediately following the title page and include the copyright symbol ©, the year of first publication of the work, and the name of the author:

© [ year ] [ Author’s Name ] All rights reserved.

Alternatively, students may choose to license their work openly under a  Creative Commons  license. The author remains the copyright holder while at the same time granting up-front permission to others to read, share, and (depending on the license) adapt the work, so long as proper attribution is given. (By default, under copyright law, the author reserves all rights; under a Creative Commons license, the author reserves some rights.)

• Do  not  print a page number on the copyright page. It is understood to be page  ii  for counting purposes only.

An abstract, numbered as page  iii , should immediately follow the copyright page and should state the problem, describe the methods and procedures used, and give the main results or conclusions of the research. The abstract will appear in the online and bound versions of the dissertation and will be published by ProQuest. There is no maximum word count for the abstract. 

• double-spaced
• left-justified
• indented on the first line of each paragraph
• The author’s name, right justified
• The words “Dissertation Advisor:” followed by the advisor’s name, left-justified (a maximum of two advisors is allowed)
• Title of the dissertation, centered, several lines below author and advisor

Dissertations divided into sections must contain a table of contents that lists, at minimum, the major headings in the following order:

• Front Matter
• Body of Text
• Back Matter

Front matter includes (if applicable):

• acknowledgements of help or encouragement from individuals or institutions
• a dedication
• a list of illustrations or tables
• a glossary of terms
• one or more epigraphs.

Back matter includes (if applicable):

• bibliography
• supplemental materials, including figures and tables
• an index (in rare instances).

Supplemental figures and tables must be placed at the end of the dissertation in an appendix, not within or at the end of a chapter. If additional digital information (including audio, video, image, or datasets) will accompany the main body of the dissertation, it should be uploaded as a supplemental file through ProQuest ETD . Supplemental material will be available in DASH and ProQuest and preserved digitally in the Harvard University Archives.

As a matter of copyright, dissertations comprising the student's previously published works must be authorized for distribution from DASH. The guidelines in this section pertain to any previously published material that requires permission from publishers or other rightsholders before it may be distributed from DASH. Please note:

• Authors whose publishing agreements grant the publisher exclusive rights to display, distribute, and create derivative works will need to seek the publisher's permission for nonexclusive use of the underlying works before the dissertation may be distributed from DASH.
• Authors whose publishing agreements indicate the authors have retained the relevant nonexclusive rights to the original materials for display, distribution, and the creation of derivative works may distribute the dissertation as a whole from DASH without need for further permissions.

It is recommended that authors consult their publishing agreements directly to determine whether and to what extent they may have transferred exclusive rights under copyright. The Office for Scholarly Communication (OSC) is available to help the author determine whether she has retained the necessary rights or requires permission. Please note, however, the Office of Scholarly Communication is not able to assist with the permissions process itself.

• Missing Dissertation Acceptance Certificate.  The first page of the PDF dissertation file should be a scanned copy of the Dissertation Acceptance Certificate (DAC). This page should not be counted or numbered as a part of the dissertation pagination.
• Conflicts Between the DAC and the Title Page.  The DAC and the dissertation title page must match exactly, meaning that the author name and the title on the title page must match that on the DAC. If you use your full middle name or just an initial on one document, it must be the same on the other document.  
• Abstract Formatting Errors. The advisor name should be left-justified, and the author's name should be right-justified. Up to two advisor names are allowed. The Abstract should be double spaced and include the page title “Abstract,” as well as the page number “iii.” There is no maximum word count for the abstract. 
•  The front matter should be numbered using Roman numerals (iii, iv, v, …). The title page and the copyright page should be counted but not numbered. The first printed page number should appear on the Abstract page (iii). 
• The body of the dissertation should be numbered using Arabic numbers (1, 2, 3, …). The first page of the body of the text should begin with page 1. Pagination may not continue from the front matter. 
• All page numbers should be centered either at the top or the bottom of the page.
• Figures and tables Figures and tables must be placed within the text, as close to their first mention as possible. Figures and tables that span more than one page must be labeled on each page. Any second and subsequent page of the figure/table must include the “(Continued)” notation. This applies to figure captions as well as images. Each page of a figure/table must be accounted for and appropriately labeled. All figures/tables must have a unique number. They may not repeat within the dissertation.
• Any figures/tables placed in a horizontal orientation must be placed with the top of the figure/ table on the left-hand side. The top of the figure/table should be aligned with the spine of the dissertation when it is bound. 
• Page numbers must be placed in the same location on all pages of the dissertation, centered, at the bottom or top of the page. Page numbers may not appear under the table/ figure.
• Supplemental Figures and Tables. Supplemental figures and tables must be placed at the back of the dissertation in an appendix. They should not be placed at the back of the chapter. 
• Permission Letters Copyright. permission letters must be uploaded as a supplemental file, titled ‘do_not_publish_permission_letters,” within the dissertation submission tool.
•  DAC Attachment. The signed Dissertation Acceptance Certificate must additionally be uploaded as a document in the "Administrative Documents" section when submitting in Proquest ETD . Dissertation submission is not complete until all documents have been received and accepted.
• Overall Formatting. The entire document should be checked after all revisions, and before submitting online, to spot any inconsistencies or PDF conversion glitches.
• You can view dissertations successfully published from your department in DASH . This is a great place to check for specific formatting and area-specific conventions.
• Contact the  Office of Student Affairs  with further questions.

CONTACT INFO

Katie riggs, explore events.

• Link to facebook
• Link to linkedin
• Link to twitter
• Link to youtube
• Writing Tips

What Should a Thesis Include? (A Handy Thesis Checklist)

3-minute read

• 2nd September 2020

What to put in a thesis or dissertation depends on the subject. After all, there’s a big difference between analyzing seventeenth-century literature and conducting a scientific experiment!

However, there are some common features shared by most theses. Use this thesis checklist to make sure you have all the bases covered in your work .

The Basics of a Thesis

No matter what you’re studying, your thesis should include:

• Cover page – A page with key information about your thesis (e.g., title, your name, the date of submission). Your university might have a template cover page, so make sure to check.
• Abstract – A brief summary of your main arguments. This can include predictions, methods, results and recommendations, but focus on key details. Ideally, it will be no more than 500 words.
• List of contents – A contents page. You may also want to include lists of images, tables or equations used in your work. Microsoft Word makes it simple to add lists based on heading and caption text .
• Introduction – A short section outlining the background, aims and objectives of your research. If you’re conducting an experiment, the hypotheses should go here as well.
• Main text – This will usually be spread out over several sections or chapters, covering the complete details of your research. What this involves will depend on your project, but there is a standard structure for experimental work (see below for more information).
• Conclusion and recommendations – The conclusion is where you summarize your findings and explain how they are related to your predictions. You may also need to make recommendations for further research or applications of your results.
• References – A complete list of all sources cited in your work.

If you’re missing any of these when you come to hand your work in, make sure to ask your supervisor in case you’ve overlooked something.

Experimental Work

If you’re reporting on an experiment, your thesis should also include:

Find this useful?

Subscribe to our newsletter and get writing tips from our editors straight to your inbox.

• Literature review – All theses should engage with past research, but experimental studies usually include a section dedicated to setting out studies and theories you’ve drawn upon.
• Methodology – Whether you’ve conducted a sociological survey or a medical laboratory test, you need to explain your methods. This includes both the techniques used and your reasons for picking them.
• Results, Discussion and Analysis – For any experimental study, you must report your results. You should also discuss and analyze their significance. Depending on your university, the results, discussion and analysis may be presented in separate sections, so check your style guide if you have one.
• Appendices – You don’t have to use an appendix (or appendices). But most studies will have extra information (e.g., complete test results, questionnaire transcripts) that doesn’t fit in the main body of your thesis. Adding this to appendices at the end of your document is a good idea.

Of course, every thesis is a little bit different, but as long as you include most of the above somewhere in your work, you’re on the right track!

Expert Thesis Proofreading

One last thing! Before submitting your thesis, you’ll want to have it proofread. This will ensure your writing is all easy to read and typo free, helping you win valuable extra marks for your research.

And if you’d like to find out how our expert academic proofreaders could help you, why not submit a free trial document today to find out?

Share this article:

Post A New Comment

Got content that needs a quick turnaround? Let us polish your work. Explore our editorial business services.

How to insert a text box in a google doc.

Google Docs is a powerful collaborative tool, and mastering its features can significantly enhance your...

2-minute read

How to Cite the CDC in APA

If you’re writing about health issues, you might need to reference the Centers for Disease...

5-minute read

Six Product Description Generator Tools for Your Product Copy

Introduction If you’re involved with ecommerce, you’re likely familiar with the often painstaking process of...

What Is a Content Editor?

Are you interested in learning more about the role of a content editor and the...

4-minute read

The Benefits of Using an Online Proofreading Service

Proofreading is important to ensure your writing is clear and concise for your readers. Whether...

6 Online AI Presentation Maker Tools

Creating presentations can be time-consuming and frustrating. Trying to construct a visually appealing and informative...

Make sure your writing is the best it can be with our expert English proofreading and editing.

The Dissertation Abstract: 101

How to write a clear & concise abstract (with examples).

By:   Madeline Fink (MSc) Reviewed By: Derek Jansen (MBA)   | June 2020

So, you’ve (finally) finished your thesis or dissertation or thesis. Now it’s time to write up your abstract (sometimes also called the executive summary). If you’re here, chances are you’re not quite sure what you need to cover in this section, or how to go about writing it. Fear not – we’ll explain it all in plain language , step by step , with clear examples .

Overview: The Dissertation/Thesis Abstract

• What exactly is a dissertation (or thesis) abstract
• What’s the purpose and function of the abstract
• Why is the abstract so important
• How to write a high-quality dissertation abstract
• Example/sample of a quality abstract
• Quick tips to write a high-quality dissertation abstract

What is an abstract?

Simply put, the abstract in a dissertation or thesis is a short (but well structured) summary that outlines the most important points of your research (i.e. the key takeaways). The abstract is usually 1 paragraph or about 300-500 words long (about one page), but but this can vary between universities.

A quick note regarding terminology – strictly speaking, an abstract and an executive summary are two different things when it comes to academic publications. Typically, an abstract only states what the research will be about, but doesn’t explore the findings – whereas an executive summary covers both . However, in the context of a dissertation or thesis, the abstract usually covers both, providing a summary of the full project.

In terms of content, a good dissertation abstract usually covers the following points:

• The purpose of the research (what’s it about and why’s that important)
• The methodology (how you carried out the research)
• The key research findings (what answers you found)
• The implications of these findings (what these answers mean)

We’ll explain each of these in more detail a little later in this post. Buckle up.

What’s the purpose of the abstract?

A dissertation abstract has two main functions:

The first purpose is to  inform potential readers  of the main idea of your research without them having to read your entire piece of work. Specifically, it needs to communicate what your research is about (what were you trying to find out) and what your findings were . When readers are deciding whether to read your dissertation or thesis, the abstract is the first part they’ll consider. 

The second purpose of the abstract is to  inform search engines and dissertation databases  as they index your dissertation or thesis. The keywords and phrases in your abstract (as well as your keyword list) will often be used by these search engines to categorize your work and make it accessible to users. 

Simply put, your abstract is your shopfront display window – it’s what passers-by (both human and digital) will look at before deciding to step inside. 

Why’s it so important?

The short answer – because most people don’t have time to read your full dissertation or thesis! Time is money, after all…

If you think back to when you undertook your literature review , you’ll quickly realise just how important abstracts are! Researchers reviewing the literature on any given topic face a mountain of reading, so they need to optimise their approach. A good dissertation abstract gives the reader a “TLDR” version of your work – it helps them decide whether to continue to read it in its entirety. So, your abstract, as your shopfront display window, needs to “sell” your research to time-poor readers.

You might be thinking, “but I don’t plan to publish my dissertation”. Even so, you still need to provide an impactful abstract for your markers. Your ability to concisely summarise your work is one of the things they’re assessing, so it’s vital to invest time and effort into crafting an enticing shop window.  

A good abstract also has an added purpose for grad students . As a freshly minted graduate, your dissertation or thesis is often your most significant professional accomplishment and highlights where your unique expertise lies. Potential employers who want to know about this expertise are likely to only read the abstract (as opposed to reading your entire document) – so it needs to be good!

Think about it this way – if your thesis or dissertation were a book, then the abstract would be the blurb on the back cover. For better or worse, readers will absolutely judge your book by its cover .

How to write your abstract

As we touched on earlier, your abstract should cover four important aspects of your research: the purpose , methodology , findings , and implications . Therefore, the structure of your dissertation or thesis abstract needs to reflect these four essentials, in the same order.  Let’s take a closer look at each of them, step by step:

Step 1: Describe the purpose and value of your research

Here you need to concisely explain the purpose and value of your research. In other words, you need to explain what your research set out to discover and why that’s important. When stating the purpose of research, you need to clearly discuss the following:

• What were your research aims and research questions ?
• Why were these aims and questions important?

It’s essential to make this section extremely clear, concise and convincing . As the opening section, this is where you’ll “hook” your reader (marker) in and get them interested in your project. If you don’t put in the effort here, you’ll likely lose their interest.

Step 2: Briefly outline your study’s methodology

In this part of your abstract, you need to very briefly explain how you went about answering your research questions . In other words, what research design and methodology you adopted in your research. Some important questions to address here include:

• Did you take a qualitative or quantitative approach ?
• Who/what did your sample consist of?
• How did you collect your data?
• How did you analyse your data?

Simply put, this section needs to address the “ how ” of your research. It doesn’t need to be lengthy (this is just a summary, after all), but it should clearly address the four questions above.

Need a helping hand?

Step 3: Present your key findings

Next, you need to briefly highlight the key findings . Your research likely produced a wealth of data and findings, so there may be a temptation to ramble here. However, this section is just about the key findings – in other words, the answers to the original questions that you set out to address.

Again, brevity and clarity are important here. You need to concisely present the most important findings for your reader.

Step 4: Describe the implications of your research

Have you ever found yourself reading through a large report, struggling to figure out what all the findings mean in terms of the bigger picture? Well, that’s the purpose of the implications section – to highlight the “so what?” of your research. 

In this part of your abstract, you should address the following questions:

• What is the impact of your research findings on the industry /field investigated? In other words, what’s the impact on the “real world”. 
• What is the impact of your findings on the existing body of knowledge ? For example, do they support the existing research?
• What might your findings mean for future research conducted on your topic?

If you include these four essential ingredients in your dissertation abstract, you’ll be on headed in a good direction.

Example: Dissertation/thesis abstract

Here is an example of an abstract from a master’s thesis, with the purpose , methods , findings , and implications colour coded.

The U.S. citizenship application process is a legal and symbolic journey shaped by many cultural processes. This research project aims to bring to light the experiences of immigrants and citizenship applicants living in Dallas, Texas, to promote a better understanding of Dallas’ increasingly diverse population. Additionally, the purpose of this project is to provide insights to a specific client, the office of Dallas Welcoming Communities and Immigrant Affairs, about Dallas’ lawful permanent residents who are eligible for citizenship and their reasons for pursuing citizenship status . The data for this project was collected through observation at various citizenship workshops and community events, as well as through semi-structured interviews with 14 U.S. citizenship applicants . Reasons for applying for U.S. citizenship discussed in this project include a desire for membership in U.S. society, access to better educational and economic opportunities, improved ease of travel and the desire to vote. Barriers to the citizenship process discussed in this project include the amount of time one must dedicate to the application, lack of clear knowledge about the process and the financial cost of the application. Other themes include the effects of capital on applicant’s experience with the citizenship process, symbolic meanings of citizenship, transnationalism and ideas of deserving and undeserving surrounding the issues of residency and U.S. citizenship. These findings indicate the need for educational resources and mentorship for Dallas-area residents applying for U.S. citizenship, as well as a need for local government programs that foster a sense of community among citizenship applicants and their neighbours.

Practical tips for writing your abstract

When crafting the abstract for your dissertation or thesis, the most powerful technique you can use is to try and put yourself in the shoes of a potential reader. Assume the reader is not an expert in the field, but is interested in the research area. In other words, write for the intelligent layman, not for the seasoned topic expert. 

Start by trying to answer the question “why should I read this dissertation?”

Remember the WWHS.

Make sure you include the  what , why ,  how , and  so what  of your research in your abstract:

• What you studied (who and where are included in this part)
• Why the topic was important
• How you designed your study (i.e. your research methodology)
• So what were the big findings and implications of your research

Keep it simple.

Use terminology appropriate to your field of study, but don’t overload your abstract with big words and jargon that cloud the meaning and make your writing difficult to digest. A good abstract should appeal to all levels of potential readers and should be a (relatively) easy read. Remember, you need to write for the intelligent layman.

Be specific.

When writing your abstract, clearly outline your most important findings and insights and don’t worry about “giving away” too much about your research – there’s no need to withhold information. This is the one way your abstract is not like a blurb on the back of a book – the reader should be able to clearly understand the key takeaways of your thesis or dissertation after reading the abstract. Of course, if they then want more detail, they need to step into the restaurant and try out the menu.

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

17 Comments

This was so very useful, thank you Caroline.

Much appreciated.

This information on Abstract for writing a Dissertation was very helpful to me!

This was so useful. Thank you very much.

This was really useful in writing the abstract for my dissertation. Thank you Caroline.

Very clear and helpful information. Thanks so much!

Fabulous information – succinct, simple information which made my life easier after the most stressful and rewarding 21 months of completing this Masters Degree.

Very clear, specific and to the point guidance. Thanks a lot. Keep helping people 🙂

This was very helpful

Thanks for this nice and helping document.

Waw!!, this is a master piece to say the least.

Very helpful and enjoyable

Thank you for sharing the very important and usful information. Best Bahar

Very clear and more understandable way of writing. I am so interested in it. God bless you dearly!!!!

Really, I found the explanation given of great help. The way the information is presented is easy to follow and capture.

Wow! Thank you so much for opening my eyes. This was so helpful to me.

Thanks for this! Very concise and helpful for my ADHD brain.

I am so grateful for the tips. I am very optimistic in coming up with a winning abstract for my dessertation, thanks to you.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

• How it works

How to Write the Thesis Or Dissertation Introduction – Guide

Published by Carmen Troy at August 31st, 2021 , Revised On January 24, 2024

Introducing your Dissertation Topic

What would you tell someone if they asked you to introduce yourself? You’d probably start with your name, what you do for a living…etc., etc., etc. Think of your dissertation. How would you go about it if you had to introduce it to the world for the first time?

Keep this forefront in your mind for the remainder of this guide: you are introducing your research to the world that doesn’t even know it exists. Every word, phrase and line you write in your introduction will stand for the strength of your dissertation’s character.

This is not very different from how, in real life, if someone fails to introduce themselves properly (such as leaving out what they do for a living, where they live, etc.) to a stranger, it leaves a lasting impression on the stranger.

Don’t leave your dissertation a stranger among other strangers. Let’s review the little, basic concepts we already have at the back of our minds, perhaps, to piece them together in one body: an introduction.

What Goes Inside an Introduction

The exact ingredients of a dissertation or thesis introduction chapter vary depending on  your chosen research topic, your university’s guidelines, and your academic subject – but they are generally mixed in one sequence or another to introduce an academic argument.

The critical elements of an excellent dissertation introduction include a definition of the selected research topic , a reference to previous studies on the subject, a statement of the value of the subject for academic and scientific communities, a clear aim/purpose of the study, a list of your objectives, a reference to viewpoints of other researchers and a justification for the research.

Topic Discussion versus Topic Introduction

Discussing and introducing a topic are two highly different aspects of dissertation introduction writing. You might find it easy to discuss a topic, but introducing it is much trickier.

The introduction is the first thing a reader reads; thus, it must be to the point, informative, engaging, and enjoyable. Even if one of these elements is missing, the reader will not be motivated to continue reading the paper and will move on to something different.

So, it’s critical to fully understand how to write the introduction of a dissertation before starting the actual write-up.

When writing a dissertation introduction, one has to explain the title, discuss the topic and present a background so that readers understand what your research is about and what  results you expect to achieve at the end of the research work.

As a standard practice, you might work on your dissertation introduction chapter several times. Once when you’re working on your proposal and the second time when writing your actual dissertation.

“ Want to keep up with the progress of the work done by your writer? ResearchProspect can deliver your dissertation order in three parts; outline, first half, and final dissertation delivery. Here is the link to our online order form .

Many academics argue that the Introduction chapter should be the last section of the dissertation paper you should complete, but by no means is it the last part you would think of because this is where your research starts from.

Write the draft introduction as early as possible. You should write it at the same time as the proposal submission, although you must revise and edit it many times before it takes the final shape.

Considering its importance, many students remain unsure of how to write the introduction of a dissertation. Here are some of the essential elements of how to write the introduction of a dissertation that’ll provide much-needed dissertation introduction writing help.

Below are some guidelines for you to learn to  write a flawless first-class dissertation paper.

Steps of Writing a Dissertation Introduction

1. research background – writing a dissertation introduction.

This is the very first section of your introduction. Building a background of your chosen topic will help you understand more about the topic and help readers know why the general research area is problematic, interesting, central, important, etc.

Your research background should include significant concepts related to your dissertation topic. This will give your supervisor and markers an idea that you’ve investigated the research problem thoroughly and know the various aspects of your topic.

The introduction to a dissertation shouldn’t talk only about other research work in the same area, as this will be discussed in the literature review section. Moreover, this section should not include the research design  and  data collection method(s) .

All about  research strategy  should be covered in the  methodology chapter . Research background only helps to build up your research in general.

For instance, if your research is based on job satisfaction measures of a specific country, the content of the introduction chapter will generally be about job satisfaction and its impact.

Hire an Expert Writer

Orders completed by our expert writers are

• Formally drafted in academic style
• Plagiarism free
• Never resold
• Include unlimited free revisions
• Completed to match exact client requirements

2.     Significance of the Research

As a researcher, you must demonstrate how your research will provide value to the scientific and academic communities. If your dissertation is based on a specific company or industry, you need to explain why that industry and company were chosen.

If you’re comparing, explain why you’re doing so and what this research will yield. Regardless of your chosen research topic, explain thoroughly in this section why this research is being conducted and what benefits it will serve.

The idea here is to convince your supervisor and readers that the concept should be researched to find a solution to a problem.

3.     Research Problem

Once you’ve described the main research problem  and the importance of your research, the next step would be to present your  problem statement , i.e., why this research is being conducted and its purpose.

This is one of the essential aspects of writing a dissertation’s introduction. Doing so will help your readers understand what you intend to do in this research and what they should expect from this study.

Presenting the research problem competently is crucial in persuading your readers to read other parts of the dissertation paper . This research problem is the crux of your dissertation, i.e., it gives a direction as to why this research is being carried out, and what issues the study will consider.

For example, if your dissertation is based on measuring the job satisfaction of a specific organisation, your research problem should talk about the problem the company is facing and how your research will help the company to solve that.

If your dissertation is not based on any specific organisation, you can explain the common issues that companies face when they do not consider job satisfaction as a pillar of business growth and elaborate on how your research will help them realise its importance.

Citing too many references in the introduction chapter isn’t recommended because here, you must explain why you chose to study a specific area and what your research will accomplish. Any citations only set the context, and you should leave the bulk of the literature for a later section.

4.     Research Question(s)

The central part of your introduction is the research question , which should be based on your research problem and the dissertation title. Combining these two aspects will help you formulate an exciting yet manageable research question.

Your research question is what your research aims to answer and around which your dissertation will revolve. The research question should be specific and concise.

It should be a one- or two-line question you’ve set out to answer through your dissertation. For the job satisfaction example, a sample research question could be, how does job satisfaction positively impact employee performance?

Look up dissertation introduction examples online or ask your friends to get an idea of how an ideal research question is formed. Or you can review our dissertation introduction example here  and  research question examples here .

Once you’ve formed your research question, pick out vital elements from it, based on which you will then prepare your theoretical framework  and literature review. You will come back to your research question again when  concluding your dissertation .

Sometimes, you might have to formulate a hypothesis in place of a research question. The hypothesis is a simple statement you prove with your  results ,  discussion and analysis .

A sample hypothesis could be job satisfaction is positively linked to employee job performance . The results of your dissertation could be in favour of this dissertation or against it.

Tip: Read up about what alternative, null, one-tailed and two-tailed hypotheses are so you can better formulate the hypothesis for your dissertation. Following are the definitions for each term, as retrieved from Trochim et al.’s Research Methods: The Essential Knowledge Base (2016):

• Alternative hypothesis (H 1 ): “A specific statement of prediction that usually states what you expect will happen in your study.”
• Null hypothesis (H 0 ): “The hypothesis that describes the possible outcomes other than the alternative hypothesis. Usually, the null hypothesis predicts there will be no effect of a program or treatment you are studying.”
• One-tailed hypothesis: “A hypothesis that specifies a direction; for example, when your hypothesis predicts that your program will increase the outcome.”
• Two-tailed hypothesis: “A hypothesis that does not specify a direction. For example, if you hypothesise that your program or intervention will affect an outcome, but you are unwilling to specify whether that effect will be positive or negative, you are using a two-tailed hypothesis.”

Get Help with Any Part of Your Dissertation!

UK’s best academic support services. How would you know until you try?

Interesting read: 10 ways to write a practical introduction fast .

Get Help With Any Part of Your Dissertation!

Uk’s best academic support services. how would you know until you try, 5.     research aims and objectives.

Next, the research aims and objectives. Aims and objectives are broad statements of desired results of your dissertation . They reflect the expectations of the topic and research and address the long-term project outcomes.

These statements should use the concepts accurately, must be focused, should be able to convey your research intentions and serve as steps that communicate how your  research question  will be answered.

You should formulate your aims and objectives based on your topic, research question, or hypothesis. These are simple statements and are an extension of your research question.

Through the aims and objectives, you communicate to your readers what aspects of research you’ve considered and how you intend to answer your research question.

Usually, these statements initiate with words like ‘to explore’, ‘to study’, ‘to assess’, ‘to critically assess’, ‘to understand’, ‘to evaluate’ etc.

You could ask your supervisor to provide some thesis introduction examples to help you understand better how aims and objectives are formulated. More examples are here .

Your aims and objectives should be interrelated and connect to your research question and problem. If they do not, they’ll be considered vague and too broad in scope.

Always ensure your research aims and objectives are concise, brief, and relevant.

Once you conclude  your dissertation , you will have to revert back to address whether your research aims and objectives have been met.

You will have to reflect on how your dissertation’s findings , analysis, and discussion related to your aims and objectives and how your research has helped in achieving them.

6.     Research Limitations

This section is sometimes a part of the  dissertation methodology section ; however, it is usually included in the introduction of a dissertation.

Every research has some limitations. Thus, it is normal for you to experience certain limitations when conducting your study.

You could experience  research design limitations, data limitations or even financial limitations. Regardless of which type of limitation you may experience, your dissertation would be impacted. Thus, it would be best if you mentioned them without any hesitation.

When including this section in the introduction, make sure that you clearly state the type of constraint you experienced. This will help your supervisor understand what problems you went through while working on your dissertation.

However, one aspect that you should take care of is that your results, in no way, should be influenced by these restrictions. The results should not be compromised, or your dissertation will not be deemed authentic and reliable.

After you’ve mentioned your research limitations, discuss how you overcame them to produce a perfect dissertation .

Also, mention that your limitations do not adversely impact your results and that you’ve produced research with accurate results the academic community can rely on.

Also read:   How to Write Dissertation Methodology .

7.     Outline of the Dissertation

Even though this isn’t a mandatory sub-section of the introduction chapter, good introductory chapters in dissertations outline what’s to follow in the preceding chapters.

It is also usual to set out an  outline of the rest of the dissertation . Depending on your university and academic subject, you might also be asked to include it in your research proposal .

Because your tutor might want to glance over it to see how you  plan your dissertation and what sections you’d include; based on what sections you include and how you intend to research and cover them, they’d provide feedback for you to improve.

Usually, this section discusses what sections you plan to include and what concepts and aspects each section entails. A standard dissertation consists of five sections : chapters, introduction,  literature review ,  methodology ,  results  and  discussion , and  conclusion .

Some  dissertation assignments do not use the same chapter for results and discussion. Instead, they split it into two different chapters, making six chapters. Check with your supervisor regarding which format you should follow.

When discussing the  outline of your dissertation , remember that you’d have to mention what each section involves. Discuss all the significant aspects of each section to give a brief overview of what your dissertation contains, and this is precisely what our dissertation outline service  provides.

Writing a dissertation introduction might seem complicated, but it is not if you understand what is expected of you. To understand the required elements and make sure that you focus on all of them.

Include all the aspects to ensure your supervisor and other readers can easily understand how you intend to undertake your research.

“If you find yourself stuck at any stage of your dissertation introduction, get introduction writing help from our writers! At ResearchProspect, we offer a dissertation writing service , and our qualified team of writers will also assist you in conducting in-depth research for your dissertation.

Dissertation Introduction Samples & Examples

Check out some basic samples of dissertation introduction chapters to get started.

FAQs about Dissertation Introduction

What is the purpose of an introduction chapter.

It’s used to introduce key constructs, ideas, models and/or theories etc. relating to the topic; things that you will be basing the remainder of your dissertation on.

How do you start an introduction in a dissertation?

There is more than one way of starting a dissertation’s introductory chapter. You can begin by stating a problem in your area of interest, review relevant literature, identify the gap, and introduce your topic. Or, you can go the opposite way, too. It’s all entirely up to your discretion. However, be consistent in the format you choose to write in.

How long can an introduction get?

It can range from 1000 to 2000 words for a master’s dissertation , but for a higher-level dissertation, it mostly ranges from 8,000 to 10,000 words ’ introduction chapter. In the end, though, it depends on the guidelines provided to you by your department.

Steps to Writing a Dissertation Introduction

You may also like.

Not sure how to write the findings of a dissertation. Here are some comprehensive guidelines for you to learn to write a flawless findings chapter.

Learn how to write a good declaration page for your thesis with the help of our step-by-step comprehensive guide. Read now.

A literature review is a survey of theses, articles, books and other academic sources. Here are guidelines on how to write dissertation literature review.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

Frequently asked questions

What should i include in a dissertation conclusion.

The conclusion of your thesis or dissertation should include the following:

• A restatement of your research question
• A summary of your key arguments and/or results
• A short discussion of the implications of your research

Frequently asked questions: Dissertation

The acknowledgements are generally included at the very beginning of your thesis or dissertation, directly after the title page and before the abstract .

If you only used a few abbreviations in your thesis or dissertation, you don’t necessarily need to include a list of abbreviations .

If your abbreviations are numerous, or if you think they won’t be known to your audience, it’s never a bad idea to add one. They can also improve readability, minimising confusion about abbreviations unfamiliar to your reader.

A list of figures and tables compiles all of the figures and tables that you used in your thesis or dissertation and displays them with the page number where they can be found.

A thesis or dissertation outline is one of the most critical first steps in your writing process. It helps you to lay out and organise your ideas and can provide you with a roadmap for deciding what kind of research you’d like to undertake.

Generally, an outline contains information on the different sections included in your thesis or dissertation, such as:

• Your anticipated title
• Your abstract
• Your chapters (sometimes subdivided into further topics like literature review, research methods, avenues for future research, etc.)

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

While it may be tempting to present new arguments or evidence in your thesis or disseration conclusion , especially if you have a particularly striking argument you’d like to finish your analysis with, you shouldn’t. Theses and dissertations follow a more formal structure than this.

All your findings and arguments should be presented in the body of the text (more specifically in the discussion section and results section .) The conclusion is meant to summarize and reflect on the evidence and arguments you have already presented, not introduce new ones.

For a stronger dissertation conclusion , avoid including:

• Generic concluding phrases (e.g. “In conclusion…”)
• Weak statements that undermine your argument (e.g. “There are good points on both sides of this issue.”)

Your conclusion should leave the reader with a strong, decisive impression of your work.

The conclusion of your thesis or dissertation shouldn’t take up more than 5-7% of your overall word count.

Research objectives describe what you intend your research project to accomplish.

They summarise the approach and purpose of the project and help to focus your research.

Your objectives should appear in the introduction of your research paper , at the end of your problem statement .

Don’t feel that you have to write the introduction first. The introduction is often one of the last parts of the research paper you’ll write, along with the conclusion.

This is because it can be easier to introduce your paper once you’ve already written the body ; you may not have the clearest idea of your arguments until you’ve written them, and things can change during the writing process .

In a thesis or dissertation, the discussion is an in-depth exploration of the results, going into detail about the meaning of your findings and citing relevant sources to put them in context.

The conclusion is more shorter and more general: it concisely answers your main research question and makes recommendations based on your overall findings.

A dissertation prospectus or proposal describes what or who you plan to research for your dissertation. It delves into why, when, where, and how you will do your research, as well as helps you choose a type of research to pursue. You should also determine whether you plan to pursue qualitative or quantitative methods and what your research design will look like.

It should outline all of the decisions you have taken about your project, from your dissertation topic to your hypotheses and research objectives , ready to be approved by your supervisor or committee.

Note that some departments require a defense component, where you present your prospectus to your committee orally.

A research project is an academic, scientific, or professional undertaking to answer a research question . Research projects can take many forms, such as qualitative or quantitative , descriptive , longitudinal , experimental , or correlational . What kind of research approach you choose will depend on your topic.

Ask our team

Want to contact us directly? No problem. We are always here for you.

• Chat with us
• Email [email protected]
• Call +44 (0)20 3917 4242
• WhatsApp +31 20 261 6040

Our support team is here to help you daily via chat, WhatsApp, email, or phone between 9:00 a.m. to 11:00 p.m. CET.

Our APA experts default to APA 7 for editing and formatting. For the Citation Editing Service you are able to choose between APA 6 and 7.

Yes, if your document is longer than 20,000 words, you will get a sample of approximately 2,000 words. This sample edit gives you a first impression of the editor’s editing style and a chance to ask questions and give feedback.

How does the sample edit work?

You will receive the sample edit within 24 hours after placing your order. You then have 24 hours to let us know if you’re happy with the sample or if there’s something you would like the editor to do differently.

Read more about how the sample edit works

Yes, you can upload your document in sections.

We try our best to ensure that the same editor checks all the different sections of your document. When you upload a new file, our system recognizes you as a returning customer, and we immediately contact the editor who helped you before.

However, we cannot guarantee that the same editor will be available. Your chances are higher if

• You send us your text as soon as possible and
• You can be flexible about the deadline.

Please note that the shorter your deadline is, the lower the chance that your previous editor is not available.

If your previous editor isn’t available, then we will inform you immediately and look for another qualified editor. Fear not! Every Scribbr editor follows the  Scribbr Improvement Model  and will deliver high-quality work.

Yes, our editors also work during the weekends and holidays.

Because we have many editors available, we can check your document 24 hours per day and 7 days per week, all year round.

If you choose a 72 hour deadline and upload your document on a Thursday evening, you’ll have your thesis back by Sunday evening!

Yes! Our editors are all native speakers, and they have lots of experience editing texts written by ESL students. They will make sure your grammar is perfect and point out any sentences that are difficult to understand. They’ll also notice your most common mistakes, and give you personal feedback to improve your writing in English.

Every Scribbr order comes with our award-winning Proofreading & Editing service , which combines two important stages of the revision process.

For a more comprehensive edit, you can add a Structure Check or Clarity Check to your order. With these building blocks, you can customize the kind of feedback you receive.

You might be familiar with a different set of editing terms. To help you understand what you can expect at Scribbr, we created this table:

View an example

When you place an order, you can specify your field of study and we’ll match you with an editor who has familiarity with this area.

However, our editors are language specialists, not academic experts in your field. Your editor’s job is not to comment on the content of your dissertation, but to improve your language and help you express your ideas as clearly and fluently as possible.

This means that your editor will understand your text well enough to give feedback on its clarity, logic and structure, but not on the accuracy or originality of its content.

Good academic writing should be understandable to a non-expert reader, and we believe that academic editing is a discipline in itself. The research, ideas and arguments are all yours – we’re here to make sure they shine!

After your document has been edited, you will receive an email with a link to download the document.

The editor has made changes to your document using ‘Track Changes’ in Word. This means that you only have to accept or ignore the changes that are made in the text one by one.

It is also possible to accept all changes at once. However, we strongly advise you not to do so for the following reasons:

• You can learn a lot by looking at the mistakes you made.
• The editors don’t only change the text – they also place comments when sentences or sometimes even entire paragraphs are unclear. You should read through these comments and take into account your editor’s tips and suggestions.
• With a final read-through, you can make sure you’re 100% happy with your text before you submit!

You choose the turnaround time when ordering. We can return your dissertation within 24 hours , 3 days or 1 week . These timescales include weekends and holidays. As soon as you’ve paid, the deadline is set, and we guarantee to meet it! We’ll notify you by text and email when your editor has completed the job.

Very large orders might not be possible to complete in 24 hours. On average, our editors can complete around 13,000 words in a day while maintaining our high quality standards. If your order is longer than this and urgent, contact us to discuss possibilities.

Always leave yourself enough time to check through the document and accept the changes before your submission deadline.

Scribbr is specialised in editing study related documents. We check:

• Graduation projects
• Dissertations
• Admissions essays
• College essays
• Application essays
• Personal statements
• Process reports
• Reflections
• Internship reports
• Academic papers
• Research proposals
• Prospectuses

Calculate the costs

The fastest turnaround time is 24 hours.

You can upload your document at any time and choose between three deadlines:

At Scribbr, we promise to make every customer 100% happy with the service we offer. Our philosophy: Your complaint is always justified – no denial, no doubts.

Our customer support team is here to find the solution that helps you the most, whether that’s a free new edit or a refund for the service.

Yes, in the order process you can indicate your preference for American, British, or Australian English .

If you don’t choose one, your editor will follow the style of English you currently use. If your editor has any questions about this, we will contact you.