research project aims and objectives

Aims and Objectives – A Guide for Academic Writing
Doing a PhD

One of the most important aspects of a thesis, dissertation or research paper is the correct formulation of the aims and objectives. This is because your aims and objectives will establish the scope, depth and direction that your research will ultimately take. An effective set of aims and objectives will give your research focus and your reader clarity, with your aims indicating what is to be achieved, and your objectives indicating how it will be achieved.

Introduction

There is no getting away from the importance of the aims and objectives in determining the success of your research project. Unfortunately, however, it is an aspect that many students struggle with, and ultimately end up doing poorly. Given their importance, if you suspect that there is even the smallest possibility that you belong to this group of students, we strongly recommend you read this page in full.

This page describes what research aims and objectives are, how they differ from each other, how to write them correctly, and the common mistakes students make and how to avoid them. An example of a good aim and objectives from a past thesis has also been deconstructed to help your understanding.

What Are Aims and Objectives?

Research aims.

A research aim describes the main goal or the overarching purpose of your research project.

In doing so, it acts as a focal point for your research and provides your readers with clarity as to what your study is all about. Because of this, research aims are almost always located within its own subsection under the introduction section of a research document, regardless of whether it’s a thesis , a dissertation, or a research paper .

A research aim is usually formulated as a broad statement of the main goal of the research and can range in length from a single sentence to a short paragraph. Although the exact format may vary according to preference, they should all describe why your research is needed (i.e. the context), what it sets out to accomplish (the actual aim) and, briefly, how it intends to accomplish it (overview of your objectives).

To give an example, we have extracted the following research aim from a real PhD thesis:

Example of a Research Aim

The role of diametrical cup deformation as a factor to unsatisfactory implant performance has not been widely reported. The aim of this thesis was to gain an understanding of the diametrical deformation behaviour of acetabular cups and shells following impaction into the reamed acetabulum. The influence of a range of factors on deformation was investigated to ascertain if cup and shell deformation may be high enough to potentially contribute to early failure and high wear rates in metal-on-metal implants.

Note: Extracted with permission from thesis titled “T he Impact And Deformation Of Press-Fit Metal Acetabular Components ” produced by Dr H Hothi of previously Queen Mary University of London.

Research Objectives

Where a research aim specifies what your study will answer, research objectives specify how your study will answer it.

They divide your research aim into several smaller parts, each of which represents a key section of your research project. As a result, almost all research objectives take the form of a numbered list, with each item usually receiving its own chapter in a dissertation or thesis.

Following the example of the research aim shared above, here are it’s real research objectives as an example:

Example of a Research Objective

Develop finite element models using explicit dynamics to mimic mallet blows during cup/shell insertion, initially using simplified experimentally validated foam models to represent the acetabulum.
Investigate the number, velocity and position of impacts needed to insert a cup.
Determine the relationship between the size of interference between the cup and cavity and deformation for different cup types.
Investigate the influence of non-uniform cup support and varying the orientation of the component in the cavity on deformation.
Examine the influence of errors during reaming of the acetabulum which introduce ovality to the cavity.
Determine the relationship between changes in the geometry of the component and deformation for different cup designs.
Develop three dimensional pelvis models with non-uniform bone material properties from a range of patients with varying bone quality.
Use the key parameters that influence deformation, as identified in the foam models to determine the range of deformations that may occur clinically using the anatomic models and if these deformations are clinically significant.

It’s worth noting that researchers sometimes use research questions instead of research objectives, or in other cases both. From a high-level perspective, research questions and research objectives make the same statements, but just in different formats.

Taking the first three research objectives as an example, they can be restructured into research questions as follows:

Restructuring Research Objectives as Research Questions

Can finite element models using simplified experimentally validated foam models to represent the acetabulum together with explicit dynamics be used to mimic mallet blows during cup/shell insertion?
What is the number, velocity and position of impacts needed to insert a cup?
What is the relationship between the size of interference between the cup and cavity and deformation for different cup types?

Difference Between Aims and Objectives

Hopefully the above explanations make clear the differences between aims and objectives, but to clarify:

The research aim focus on what the research project is intended to achieve; research objectives focus on how the aim will be achieved.
Research aims are relatively broad; research objectives are specific.
Research aims focus on a project’s long-term outcomes; research objectives focus on its immediate, short-term outcomes.
A research aim can be written in a single sentence or short paragraph; research objectives should be written as a numbered list.

How to Write Aims and Objectives

Before we discuss how to write a clear set of research aims and objectives, we should make it clear that there is no single way they must be written. Each researcher will approach their aims and objectives slightly differently, and often your supervisor will influence the formulation of yours on the basis of their own preferences.

Regardless, there are some basic principles that you should observe for good practice; these principles are described below.

Your aim should be made up of three parts that answer the below questions:

Why is this research required?
What is this research about?
How are you going to do it?

The easiest way to achieve this would be to address each question in its own sentence, although it does not matter whether you combine them or write multiple sentences for each, the key is to address each one.

The first question, why , provides context to your research project, the second question, what , describes the aim of your research, and the last question, how , acts as an introduction to your objectives which will immediately follow.

Scroll through the image set below to see the ‘why, what and how’ associated with our research aim example.

Note: Your research aims need not be limited to one. Some individuals per to define one broad ‘overarching aim’ of a project and then adopt two or three specific research aims for their thesis or dissertation. Remember, however, that in order for your assessors to consider your research project complete, you will need to prove you have fulfilled all of the aims you set out to achieve. Therefore, while having more than one research aim is not necessarily disadvantageous, consider whether a single overarching one will do.

Research Objectives

Each of your research objectives should be SMART :

Specific – is there any ambiguity in the action you are going to undertake, or is it focused and well-defined?
Measurable – how will you measure progress and determine when you have achieved the action?
Achievable – do you have the support, resources and facilities required to carry out the action?
Relevant – is the action essential to the achievement of your research aim?
Timebound – can you realistically complete the action in the available time alongside your other research tasks?

In addition to being SMART, your research objectives should start with a verb that helps communicate your intent. Common research verbs include:

Table of Research Verbs to Use in Aims and Objectives

Last, format your objectives into a numbered list. This is because when you write your thesis or dissertation, you will at times need to make reference to a specific research objective; structuring your research objectives in a numbered list will provide a clear way of doing this.

To bring all this together, let’s compare the first research objective in the previous example with the above guidance:

Checking Research Objective Example Against Recommended Approach

Research Objective:

1. Develop finite element models using explicit dynamics to mimic mallet blows during cup/shell insertion, initially using simplified experimentally validated foam models to represent the acetabulum.

Checking Against Recommended Approach:

Q: Is it specific? A: Yes, it is clear what the student intends to do (produce a finite element model), why they intend to do it (mimic cup/shell blows) and their parameters have been well-defined ( using simplified experimentally validated foam models to represent the acetabulum ).

Q: Is it measurable? A: Yes, it is clear that the research objective will be achieved once the finite element model is complete.

Q: Is it achievable? A: Yes, provided the student has access to a computer lab, modelling software and laboratory data.

Q: Is it relevant? A: Yes, mimicking impacts to a cup/shell is fundamental to the overall aim of understanding how they deform when impacted upon.

Q: Is it timebound? A: Yes, it is possible to create a limited-scope finite element model in a relatively short time, especially if you already have experience in modelling.

Q: Does it start with a verb? A: Yes, it starts with ‘develop’, which makes the intent of the objective immediately clear.

Q: Is it a numbered list? A: Yes, it is the first research objective in a list of eight.

Mistakes in Writing Research Aims and Objectives

1. making your research aim too broad.

Having a research aim too broad becomes very difficult to achieve. Normally, this occurs when a student develops their research aim before they have a good understanding of what they want to research. Remember that at the end of your project and during your viva defence , you will have to prove that you have achieved your research aims; if they are too broad, this will be an almost impossible task. In the early stages of your research project, your priority should be to narrow your study to a specific area. A good way to do this is to take the time to study existing literature, question their current approaches, findings and limitations, and consider whether there are any recurring gaps that could be investigated .

Note: Achieving a set of aims does not necessarily mean proving or disproving a theory or hypothesis, even if your research aim was to, but having done enough work to provide a useful and original insight into the principles that underlie your research aim.

2. Making Your Research Objectives Too Ambitious

Be realistic about what you can achieve in the time you have available. It is natural to want to set ambitious research objectives that require sophisticated data collection and analysis, but only completing this with six months before the end of your PhD registration period is not a worthwhile trade-off.

3. Formulating Repetitive Research Objectives

Each research objective should have its own purpose and distinct measurable outcome. To this effect, a common mistake is to form research objectives which have large amounts of overlap. This makes it difficult to determine when an objective is truly complete, and also presents challenges in estimating the duration of objectives when creating your project timeline. It also makes it difficult to structure your thesis into unique chapters, making it more challenging for you to write and for your audience to read.

Fortunately, this oversight can be easily avoided by using SMART objectives.

Hopefully, you now have a good idea of how to create an effective set of aims and objectives for your research project, whether it be a thesis, dissertation or research paper. While it may be tempting to dive directly into your research, spending time on getting your aims and objectives right will give your research clear direction. This won’t only reduce the likelihood of problems arising later down the line, but will also lead to a more thorough and coherent research project.

Finding a PhD has never been this easy – search for a PhD by keyword, location or academic area of interest.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

Research Aims, Objectives & Questions

The “Golden Thread” Explained Simply (+ Examples)

By: David Phair (PhD) and Alexandra Shaeffer (PhD) | June 2022

The research aims , objectives and research questions (collectively called the “golden thread”) are arguably the most important thing you need to get right when you’re crafting a research proposal , dissertation or thesis . We receive questions almost every day about this “holy trinity” of research and there’s certainly a lot of confusion out there, so we’ve crafted this post to help you navigate your way through the fog.

Overview: The Golden Thread

What is the golden thread
What are research aims ( examples )
What are research objectives ( examples )
What are research questions ( examples )
The importance of alignment in the golden thread

What is the “golden thread”?

The golden thread simply refers to the collective research aims , research objectives , and research questions for any given project (i.e., a dissertation, thesis, or research paper ). These three elements are bundled together because it’s extremely important that they align with each other, and that the entire research project aligns with them.

Importantly, the golden thread needs to weave its way through the entirety of any research project , from start to end. In other words, it needs to be very clearly defined right at the beginning of the project (the topic ideation and proposal stage) and it needs to inform almost every decision throughout the rest of the project. For example, your research design and methodology will be heavily influenced by the golden thread (we’ll explain this in more detail later), as well as your literature review.

The research aims, objectives and research questions (the golden thread) define the focus and scope ( the delimitations ) of your research project. In other words, they help ringfence your dissertation or thesis to a relatively narrow domain, so that you can “go deep” and really dig into a specific problem or opportunity. They also help keep you on track , as they act as a litmus test for relevance. In other words, if you’re ever unsure whether to include something in your document, simply ask yourself the question, “does this contribute toward my research aims, objectives or questions?”. If it doesn’t, chances are you can drop it.

Alright, enough of the fluffy, conceptual stuff. Let’s get down to business and look at what exactly the research aims, objectives and questions are and outline a few examples to bring these concepts to life.

Free Webinar: How To Find A Dissertation Research Topic

Research Aims: What are they?

Simply put, the research aim(s) is a statement that reflects the broad overarching goal (s) of the research project. Research aims are fairly high-level (low resolution) as they outline the general direction of the research and what it’s trying to achieve .

Research Aims: Examples

True to the name, research aims usually start with the wording “this research aims to…”, “this research seeks to…”, and so on. For example:

“This research aims to explore employee experiences of digital transformation in retail HR.” “This study sets out to assess the interaction between student support and self-care on well-being in engineering graduate students”

As you can see, these research aims provide a high-level description of what the study is about and what it seeks to achieve. They’re not hyper-specific or action-oriented, but they’re clear about what the study’s focus is and what is being investigated.

Need a helping hand?

Research Objectives: What are they?

The research objectives take the research aims and make them more practical and actionable . In other words, the research objectives showcase the steps that the researcher will take to achieve the research aims.

The research objectives need to be far more specific (higher resolution) and actionable than the research aims. In fact, it’s always a good idea to craft your research objectives using the “SMART” criteria. In other words, they should be specific, measurable, achievable, relevant and time-bound”.

Research Objectives: Examples

Let’s look at two examples of research objectives. We’ll stick with the topic and research aims we mentioned previously.

For the digital transformation topic:

To observe the retail HR employees throughout the digital transformation. To assess employee perceptions of digital transformation in retail HR. To identify the barriers and facilitators of digital transformation in retail HR.

And for the student wellness topic:

To determine whether student self-care predicts the well-being score of engineering graduate students. To determine whether student support predicts the well-being score of engineering students. To assess the interaction between student self-care and student support when predicting well-being in engineering graduate students.

As you can see, these research objectives clearly align with the previously mentioned research aims and effectively translate the low-resolution aims into (comparatively) higher-resolution objectives and action points . They give the research project a clear focus and present something that resembles a research-based “to-do” list.

The research objectives detail the specific steps that you, as the researcher, will take to achieve the research aims you laid out.

Research Questions: What are they?

Finally, we arrive at the all-important research questions. The research questions are, as the name suggests, the key questions that your study will seek to answer . Simply put, they are the core purpose of your dissertation, thesis, or research project. You’ll present them at the beginning of your document (either in the introduction chapter or literature review chapter) and you’ll answer them at the end of your document (typically in the discussion and conclusion chapters).

The research questions will be the driving force throughout the research process. For example, in the literature review chapter, you’ll assess the relevance of any given resource based on whether it helps you move towards answering your research questions. Similarly, your methodology and research design will be heavily influenced by the nature of your research questions. For instance, research questions that are exploratory in nature will usually make use of a qualitative approach, whereas questions that relate to measurement or relationship testing will make use of a quantitative approach.

Let’s look at some examples of research questions to make this more tangible.

Research Questions: Examples

Again, we’ll stick with the research aims and research objectives we mentioned previously.

For the digital transformation topic (which would be qualitative in nature):

How do employees perceive digital transformation in retail HR? What are the barriers and facilitators of digital transformation in retail HR?

And for the student wellness topic (which would be quantitative in nature):

Does student self-care predict the well-being scores of engineering graduate students? Does student support predict the well-being scores of engineering students? Do student self-care and student support interact when predicting well-being in engineering graduate students?

You’ll probably notice that there’s quite a formulaic approach to this. In other words, the research questions are basically the research objectives “converted” into question format. While that is true most of the time, it’s not always the case. For example, the first research objective for the digital transformation topic was more or less a step on the path toward the other objectives, and as such, it didn’t warrant its own research question.

So, don’t rush your research questions and sloppily reword your objectives as questions. Carefully think about what exactly you’re trying to achieve (i.e. your research aim) and the objectives you’ve set out, then craft a set of well-aligned research questions . Also, keep in mind that this can be a somewhat iterative process , where you go back and tweak research objectives and aims to ensure tight alignment throughout the golden thread.

The importance of strong alignment

Alignment is the keyword here and we have to stress its importance . Simply put, you need to make sure that there is a very tight alignment between all three pieces of the golden thread. If your research aims and research questions don’t align, for example, your project will be pulling in different directions and will lack focus . This is a common problem students face and can cause many headaches (and tears), so be warned.

Take the time to carefully craft your research aims, objectives and research questions before you run off down the research path. Ideally, get your research supervisor/advisor to review and comment on your golden thread before you invest significant time into your project, and certainly before you start collecting data .

Recap: The golden thread

In this post, we unpacked the golden thread of research, consisting of the research aims , research objectives and research questions . You can jump back to any section using the links below.

As always, feel free to leave a comment below – we always love to hear from you. Also, if you’re interested in 1-on-1 support, take a look at our private coaching service here.

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

38 Comments

Thank you very much for your great effort put. As an Undergraduate taking Demographic Research & Methodology, I’ve been trying so hard to understand clearly what is a Research Question, Research Aim and the Objectives in a research and the relationship between them etc. But as for now I’m thankful that you’ve solved my problem.

Well appreciated. This has helped me greatly in doing my dissertation.

An so delighted with this wonderful information thank you a lot.

so impressive i have benefited a lot looking forward to learn more on research.

I am very happy to have carefully gone through this well researched article.

Infact,I used to be phobia about anything research, because of my poor understanding of the concepts.

Now,I get to know that my research question is the same as my research objective(s) rephrased in question format.

I please I would need a follow up on the subject,as I intends to join the team of researchers. Thanks once again.

Thanks so much. This was really helpful.

I know you pepole have tried to break things into more understandable and easy format. And God bless you. Keep it up

i found this document so useful towards my study in research methods. thanks so much.

This is my 2nd read topic in your course and I should commend the simplified explanations of each part. I’m beginning to understand and absorb the use of each part of a dissertation/thesis. I’ll keep on reading your free course and might be able to avail the training course! Kudos!

Thank you! Better put that my lecture and helped to easily understand the basics which I feel often get brushed over when beginning dissertation work.

This is quite helpful. I like how the Golden thread has been explained and the needed alignment.

This is quite helpful. I really appreciate!

The article made it simple for researcher students to differentiate between three concepts.

Very innovative and educational in approach to conducting research.

I am very impressed with all these terminology, as I am a fresh student for post graduate, I am highly guided and I promised to continue making consultation when the need arise. Thanks a lot.

A very helpful piece. thanks, I really appreciate it .

Very well explained, and it might be helpful to many people like me.

Wish i had found this (and other) resource(s) at the beginning of my PhD journey… not in my writing up year… 😩 Anyways… just a quick question as i’m having some issues ordering my “golden thread”…. does it matter in what order you mention them? i.e., is it always first aims, then objectives, and finally the questions? or can you first mention the research questions and then the aims and objectives?

Thank you for a very simple explanation that builds upon the concepts in a very logical manner. Just prior to this, I read the research hypothesis article, which was equally very good. This met my primary objective.

My secondary objective was to understand the difference between research questions and research hypothesis, and in which context to use which one. However, I am still not clear on this. Can you kindly please guide?

In research, a research question is a clear and specific inquiry that the researcher wants to answer, while a research hypothesis is a tentative statement or prediction about the relationship between variables or the expected outcome of the study. Research questions are broader and guide the overall study, while hypotheses are specific and testable statements used in quantitative research. Research questions identify the problem, while hypotheses provide a focus for testing in the study.

Exactly what I need in this research journey, I look forward to more of your coaching videos.

This helped a lot. Thanks so much for the effort put into explaining it.

What data source in writing dissertation/Thesis requires?

What is data source covers when writing dessertation/thesis

This is quite useful thanks

I’m excited and thankful. I got so much value which will help me progress in my thesis.

where are the locations of the reserch statement, research objective and research question in a reserach paper? Can you write an ouline that defines their places in the researh paper?

Very helpful and important tips on Aims, Objectives and Questions.

Thank you so much for making research aim, research objectives and research question so clear. This will be helpful to me as i continue with my thesis.

Thanks much for this content. I learned a lot. And I am inspired to learn more. I am still struggling with my preparation for dissertation outline/proposal. But I consistently follow contents and tutorials and the new FB of GRAD Coach. Hope to really become confident in writing my dissertation and successfully defend it.

As a researcher and lecturer, I find splitting research goals into research aims, objectives, and questions is unnecessarily bureaucratic and confusing for students. For most biomedical research projects, including ‘real research’, 1-3 research questions will suffice (numbers may differ by discipline).

Awesome! Very important resources and presented in an informative way to easily understand the golden thread. Indeed, thank you so much.

Well explained

The blog article on research aims, objectives, and questions by Grad Coach is a clear and insightful guide that aligns with my experiences in academic research. The article effectively breaks down the often complex concepts of research aims and objectives, providing a straightforward and accessible explanation. Drawing from my own research endeavors, I appreciate the practical tips offered, such as the need for specificity and clarity when formulating research questions. The article serves as a valuable resource for students and researchers, offering a concise roadmap for crafting well-defined research goals and objectives. Whether you’re a novice or an experienced researcher, this article provides practical insights that contribute to the foundational aspects of a successful research endeavor.

A great thanks for you. it is really amazing explanation. I grasp a lot and one step up to research knowledge.

I really found these tips helpful. Thank you very much Grad Coach.

I found this article helpful. Thanks for sharing this.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Print Friendly

Formulating Research Aims and Objectives

Formulating research aim and objectives in an appropriate manner is one of the most important aspects of your thesis. This is because research aim and objectives determine the scope, depth and the overall direction of the research. Research question is the central question of the study that has to be answered on the basis of research findings.

Research aim emphasizes what needs to be achieved within the scope of the research, by the end of the research process. Achievement of research aim provides answer to the research question.

Research objectives divide research aim into several parts and address each part separately. Research aim specifies WHAT needs to be studied and research objectives comprise a number of steps that address HOW research aim will be achieved.

As a rule of dumb, there would be one research aim and several research objectives. Achievement of each research objective will lead to the achievement of the research aim.

Consider the following as an example:

Research title: Effects of organizational culture on business profitability: a case study of Virgin Atlantic

Research aim: To assess the effects of Virgin Atlantic organizational culture on business profitability

Following research objectives would facilitate the achievement of this aim:

Analyzing the nature of organizational culture at Virgin Atlantic by September 1, 2022
Identifying factors impacting Virgin Atlantic organizational culture by September 16, 2022
Analyzing impacts of Virgin Atlantic organizational culture on employee performances by September 30, 2022
Providing recommendations to Virgin Atlantic strategic level management in terms of increasing the level of effectiveness of organizational culture by October 5, 2022

Figure below illustrates additional examples in formulating research aims and objectives:

Formulation of research question, aim and objectives

Common mistakes in the formulation of research aim relate to the following:

1. Choosing the topic too broadly . This is the most common mistake. For example, a research title of “an analysis of leadership practices” can be classified as too broad because the title fails to answer the following questions:

a) Which aspects of leadership practices? Leadership has many aspects such as employee motivation, ethical behaviour, strategic planning, change management etc. An attempt to cover all of these aspects of organizational leadership within a single research will result in an unfocused and poor work.

b) An analysis of leadership practices in which country? Leadership practices tend to be different in various countries due to cross-cultural differences, legislations and a range of other region-specific factors. Therefore, a study of leadership practices needs to be country-specific.

c) Analysis of leadership practices in which company or industry? Similar to the point above, analysis of leadership practices needs to take into account industry-specific and/or company-specific differences, and there is no way to conduct a leadership research that relates to all industries and organizations in an equal manner.

Accordingly, as an example “a study into the impacts of ethical behaviour of a leader on the level of employee motivation in US healthcare sector” would be a more appropriate title than simply “An analysis of leadership practices”.

2. Setting an unrealistic aim . Formulation of a research aim that involves in-depth interviews with Apple strategic level management by an undergraduate level student can be specified as a bit over-ambitious. This is because securing an interview with Apple CEO Tim Cook or members of Apple Board of Directors might not be easy. This is an extreme example of course, but you got the idea. Instead, you may aim to interview the manager of your local Apple store and adopt a more feasible strategy to get your dissertation completed.

3. Choosing research methods incompatible with the timeframe available . Conducting interviews with 20 sample group members and collecting primary data through 2 focus groups when only three months left until submission of your dissertation can be very difficult, if not impossible. Accordingly, timeframe available need to be taken into account when formulating research aims and objectives and selecting research methods.

Moreover, research objectives need to be formulated according to SMART principle,

where the abbreviation stands for specific, measurable, achievable, realistic, and time-bound.

Examples of SMART research objectives

At the conclusion part of your research project you will need to reflect on the level of achievement of research aims and objectives. In case your research aims and objectives are not fully achieved by the end of the study, you will need to discuss the reasons. These may include initial inappropriate formulation of research aims and objectives, effects of other variables that were not considered at the beginning of the research or changes in some circumstances during the research process.

John Dudovskiy

A Guide to Writing Research Objectives and Aims

Post author: Research Zone
Post published: September 6, 2021
Post category: Academic Advice / Writing Thesis
Post comments: 1 Comment

Introduction

In determining the success of your research project, it is crucial to understand your research objectives and aim. However, it is, unfortunately, an aspect that many students struggle with, resulting in poor performance. As a result of their importance, if you suspect even the slightest possibility that you belong to this group of students, we strongly recommend that you read this article in its entirety.

In this article, we describe what research aim and objectives are, what distinguishes them from each other, and how to write them correctly.

What is Research Aim?

Research aims describe the purpose or main goal of a project. It help your reader to understand the focus of your research and gives them an idea of what you are trying to accomplish. Research aims are found in their own subsection under the introduction section of all research documents, regardless of whether they are dissertations or research papers.

In most situations, a research aim is expressed as a broad statement of the main goal of the study and doesn’t need to be more than one sentence. The exact format of the outline will vary depending on your preference, but it should all explain the purpose (context), your objective (the actual aim), and how you plan to accomplish it (highlights of your objectives).

What are Research Objectives?

Research aim defines what your study is going to answer, but research objectives outline how it’s going to answer it.

Those objectives break down each component of your research project into smaller portions, each representing a key section of it. Thus, almost all dissertations and theses are organized into numbered lists, with each item getting its own chapter.

Understanding the difference between research objectives and aim

The above explanation should make clear the difference between aim and objectives, but to clarify:

Aim focus on what a project proposes to achieve; objectives focus on how the project will achieve its goal.
The research objectives are more specific than the research aims.
Objectives focus on the short-term and immediate outcomes of a project while aim focus on its long-term outcomes.
It would be best to write an objective as a numbered list; research aim can be written in one sentence or short paragraph.

How to Write the Aim and Objectives of Research?

It is important to note that there is no definitive way to write clear objectives and aim for research. Researchers typically formulate their goals and objectives in so many different ways, and your supervisor may often influence the formulation based on their preferences.

Nevertheless, there are a few basic principles you should observe to ensure good practice; these principles are listed below.

Research Aim

The aim should include three parts, which address the following questions:

Why is this research necessary?
What is the purpose of this study?
How will you accomplish it?

It is easier to accomplish writing your research aim by addressing each question using its own sentence, although you can combine sentences for each or write multiple sentences for each question, the important thing is to address each one individually.

The first question, why, provides context to your research project, the second question, what describes the aim of your research, and the last question, how, acts as an introduction to your objectives which will immediately follow.

Research Objectives

Each of your research objectives should have the following:

Specific: Is the action you intend to take unclear, or is it focused and well-defined?
Assessable: What method will you use to measure your progress and determine when you have accomplished your goal?
Obtainable: Do you have the necessary support, resources, and facilities to execute the project?
Relevant: Does the action you propose support the achievement of your research aim?
Timebound: Are you realistically able to complete the action within the given timeframe?

Properly formulating the aims and objectives of your thesis, dissertation, or research paper is an integral part of its success. Your goals and objectives will determine what your research ultimately looks like in terms of scope, depth, and direction. You will gain clarity in your research and in the minds of your readers if you establish clear aims and objectives, with your aim stating what you wish to achieve, and your objectives indicating how you will do that. Moreover, you will have a clearer direction for your research if you take the time to establish your research objective and aim. This will lead to fewer future issues, but also to a more thorough and cohesive research project.

Feel free to reach out to us here if you need assistance in writing your objectives or aim for your thesis or research. You can also click here to learn more about the services provided.

شارك هذا الموضوع:

The Importance of Formatting for Academic Research

Editing & Proofreading your Thesis

Research Methodology for Academic Papers

This post has one comment.

I’ve been browsing online greater than three hours these days, but I never discovered any interesting article like yours. It抯 lovely value sufficient for me. In my view, if all website owners and bloggers made excellent content as you probably did, the web can be a lot more useful than ever before.

Research Objectives – Types, Examples and Writing Guide

Table of Contents

Research Objectives

Research objectives refer to the specific goals or aims of a research study. They provide a clear and concise description of what the researcher hopes to achieve by conducting the research . The objectives are typically based on the research questions and hypotheses formulated at the beginning of the study and are used to guide the research process.

Types of Research Objectives

Here are the different types of research objectives in research:

Exploratory Objectives: These objectives are used to explore a topic, issue, or phenomenon that has not been studied in-depth before. The aim of exploratory research is to gain a better understanding of the subject matter and generate new ideas and hypotheses .
Descriptive Objectives: These objectives aim to describe the characteristics, features, or attributes of a particular population, group, or phenomenon. Descriptive research answers the “what” questions and provides a snapshot of the subject matter.
Explanatory Objectives : These objectives aim to explain the relationships between variables or factors. Explanatory research seeks to identify the cause-and-effect relationships between different phenomena.
Predictive Objectives: These objectives aim to predict future events or outcomes based on existing data or trends. Predictive research uses statistical models to forecast future trends or outcomes.
Evaluative Objectives : These objectives aim to evaluate the effectiveness or impact of a program, intervention, or policy. Evaluative research seeks to assess the outcomes or results of a particular intervention or program.
Prescriptive Objectives: These objectives aim to provide recommendations or solutions to a particular problem or issue. Prescriptive research identifies the best course of action based on the results of the study.
Diagnostic Objectives : These objectives aim to identify the causes or factors contributing to a particular problem or issue. Diagnostic research seeks to uncover the underlying reasons for a particular phenomenon.
Comparative Objectives: These objectives aim to compare two or more groups, populations, or phenomena to identify similarities and differences. Comparative research is used to determine which group or approach is more effective or has better outcomes.
Historical Objectives: These objectives aim to examine past events, trends, or phenomena to gain a better understanding of their significance and impact. Historical research uses archival data, documents, and records to study past events.
Ethnographic Objectives : These objectives aim to understand the culture, beliefs, and practices of a particular group or community. Ethnographic research involves immersive fieldwork and observation to gain an insider’s perspective of the group being studied.
Action-oriented Objectives: These objectives aim to bring about social or organizational change. Action-oriented research seeks to identify practical solutions to social problems and to promote positive change in society.
Conceptual Objectives: These objectives aim to develop new theories, models, or frameworks to explain a particular phenomenon or set of phenomena. Conceptual research seeks to provide a deeper understanding of the subject matter by developing new theoretical perspectives.
Methodological Objectives: These objectives aim to develop and improve research methods and techniques. Methodological research seeks to advance the field of research by improving the validity, reliability, and accuracy of research methods and tools.
Theoretical Objectives : These objectives aim to test and refine existing theories or to develop new theoretical perspectives. Theoretical research seeks to advance the field of knowledge by testing and refining existing theories or by developing new theoretical frameworks.
Measurement Objectives : These objectives aim to develop and validate measurement instruments, such as surveys, questionnaires, and tests. Measurement research seeks to improve the quality and reliability of data collection and analysis by developing and testing new measurement tools.
Design Objectives : These objectives aim to develop and refine research designs, such as experimental, quasi-experimental, and observational designs. Design research seeks to improve the quality and validity of research by developing and testing new research designs.
Sampling Objectives: These objectives aim to develop and refine sampling techniques, such as probability and non-probability sampling methods. Sampling research seeks to improve the representativeness and generalizability of research findings by developing and testing new sampling techniques.

How to Write Research Objectives

Writing clear and concise research objectives is an important part of any research project, as it helps to guide the study and ensure that it is focused and relevant. Here are some steps to follow when writing research objectives:

Identify the research problem : Before you can write research objectives, you need to identify the research problem you are trying to address. This should be a clear and specific problem that can be addressed through research.
Define the research questions : Based on the research problem, define the research questions you want to answer. These questions should be specific and should guide the research process.
Identify the variables : Identify the key variables that you will be studying in your research. These are the factors that you will be measuring, manipulating, or analyzing to answer your research questions.
Write specific objectives: Write specific, measurable objectives that will help you answer your research questions. These objectives should be clear and concise and should indicate what you hope to achieve through your research.
Use the SMART criteria: To ensure that your research objectives are well-defined and achievable, use the SMART criteria. This means that your objectives should be Specific, Measurable, Achievable, Relevant, and Time-bound.
Revise and refine: Once you have written your research objectives, revise and refine them to ensure that they are clear, concise, and achievable. Make sure that they align with your research questions and variables, and that they will help you answer your research problem.

Example of Research Objectives

Examples of research objectives Could be:

Research Objectives for the topic of “The Impact of Artificial Intelligence on Employment”:

To investigate the effects of the adoption of AI on employment trends across various industries and occupations.
To explore the potential for AI to create new job opportunities and transform existing roles in the workforce.
To examine the social and economic implications of the widespread use of AI for employment, including issues such as income inequality and access to education and training.
To identify the skills and competencies that will be required for individuals to thrive in an AI-driven workplace, and to explore the role of education and training in developing these skills.
To evaluate the ethical and legal considerations surrounding the use of AI for employment, including issues such as bias, privacy, and the responsibility of employers and policymakers to protect workers’ rights.

When to Write Research Objectives

At the beginning of a research project : Research objectives should be identified and written down before starting a research project. This helps to ensure that the project is focused and that data collection and analysis efforts are aligned with the intended purpose of the research.
When refining research questions: Writing research objectives can help to clarify and refine research questions. Objectives provide a more concrete and specific framework for addressing research questions, which can improve the overall quality and direction of a research project.
After conducting a literature review : Conducting a literature review can help to identify gaps in knowledge and areas that require further research. Writing research objectives can help to define and focus the research effort in these areas.
When developing a research proposal: Research objectives are an important component of a research proposal. They help to articulate the purpose and scope of the research, and provide a clear and concise summary of the expected outcomes and contributions of the research.
When seeking funding for research: Funding agencies often require a detailed description of research objectives as part of a funding proposal. Writing clear and specific research objectives can help to demonstrate the significance and potential impact of a research project, and increase the chances of securing funding.
When designing a research study : Research objectives guide the design and implementation of a research study. They help to identify the appropriate research methods, sampling strategies, data collection and analysis techniques, and other relevant aspects of the study design.
When communicating research findings: Research objectives provide a clear and concise summary of the main research questions and outcomes. They are often included in research reports and publications, and can help to ensure that the research findings are communicated effectively and accurately to a wide range of audiences.
When evaluating research outcomes : Research objectives provide a basis for evaluating the success of a research project. They help to measure the degree to which research questions have been answered and the extent to which research outcomes have been achieved.
When conducting research in a team : Writing research objectives can facilitate communication and collaboration within a research team. Objectives provide a shared understanding of the research purpose and goals, and can help to ensure that team members are working towards a common objective.

Purpose of Research Objectives

Some of the main purposes of research objectives include:

To clarify the research question or problem : Research objectives help to define the specific aspects of the research question or problem that the study aims to address. This makes it easier to design a study that is focused and relevant.
To guide the research design: Research objectives help to determine the research design, including the research methods, data collection techniques, and sampling strategy. This ensures that the study is structured and efficient.
To measure progress : Research objectives provide a way to measure progress throughout the research process. They help the researcher to evaluate whether they are on track and meeting their goals.
To communicate the research goals : Research objectives provide a clear and concise description of the research goals. This helps to communicate the purpose of the study to other researchers, stakeholders, and the general public.

Advantages of Research Objectives

Here are some advantages of having well-defined research objectives:

Focus : Research objectives help to focus the research effort on specific areas of inquiry. By identifying clear research questions, the researcher can narrow down the scope of the study and avoid getting sidetracked by irrelevant information.
Clarity : Clearly stated research objectives provide a roadmap for the research study. They provide a clear direction for the research, making it easier for the researcher to stay on track and achieve their goals.
Measurability : Well-defined research objectives provide measurable outcomes that can be used to evaluate the success of the research project. This helps to ensure that the research is effective and that the research goals are achieved.
Feasibility : Research objectives help to ensure that the research project is feasible. By clearly defining the research goals, the researcher can identify the resources required to achieve those goals and determine whether those resources are available.
Relevance : Research objectives help to ensure that the research study is relevant and meaningful. By identifying specific research questions, the researcher can ensure that the study addresses important issues and contributes to the existing body of knowledge.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

How to Cite Research Paper – All Formats and...

Data Collection – Methods Types and Examples

Delimitations in Research – Types, Examples and...

Research Paper Format – Types, Examples and...

Research Process – Steps, Examples and Tips

Research Design – Types, Methods and Examples

How it works

How to Write the Dissertation Aims and Objectives – Guide & Examples

Published by Grace Graffin at January 27th, 2023 , Revised On October 9, 2023

Aims and objectives are among the essential aspects of a dissertation. If you write aims and objectives effectively, they can act as a foundation to give your research clarity and focus.

This article will provide you with all the necessary information regarding aims and objectives, their differences, writing tips , and the common mistakes you should avoid while writing them.

The aim is often a single sentence or a short paragraph that describes your dissertation’s main goal and intent. It tells what you hope to achieve at the end. You should write the aim so that it becomes identifiable when it is achieved with the completion of your dissertation .

The aim is written in a subsection of the introduction to clarify the overall purpose of the dissertation .

Example: It is often observed that employees in culturally diverse workplaces struggle to work effectively in a team. A probable cause of this issue is bullying at the workplace. This research investigates the impact of bullying on employee job satisfaction at culturally diverse workplaces and the resulting loss of employee productivity. This research will use surveys and case study analysis to analyze the impact of bullying on employees.

The objectives in a dissertation describe the ways through which you intend to achieve the research aim. They are specific statements that break down the aim into several smaller key sections of the overall research. Suitable objectives can help you stay focused and conduct research in the direction of your aim.

The number of objectives should be realistic; usually, between three to six, and each one should be possible to achieve. The following example shows the objectives for the previously-mentioned dissertation aim.

1. identification of the behaviors that are considered as bullying 2. exploring the factors that cause bullying at a culturally diverse workplace 3. analyzing the relationship between bullying and job satisfaction of employees 4. providing suitable recommendations on minimizing the bullying at the workplace

The objectives of a dissertation should be SMART.

Specific: should be precise, focused, and well-defined
Measurable: the progress should be measurable, and you should be able to determine when you have achieved an objective.
Achievable: you should be able to carry out the required action within your available resources
Relevant: should be related to the dissertation aim
Time-bound: should be possible within the available time

Differences between aims and objectives

Aims and objectives are often mixed, but there are clear differences between them.

Hire an Expert Writer

Orders completed by our expert writers are

Formally drafted in an academic style
Free Amendments and 100% Plagiarism Free – or your money back!
100% Confidential and Timely Delivery!
Free anti-plagiarism report
Appreciated by thousands of clients. Check client reviews

How to write aims and objectives?

There is no particular way or standard to write the aims and objectives. Different researchers have different writing styles, and often it can be influenced by your research supervisor. However, you should follow certain basic principles while writing aims and objectives in a dissertation.

Writing the aim statement

The aim statement should cover the following essential elements.

Why is the research necessary? (covers the underlying problem on which the study is to be conducted)
What is the research about? (description of the research title)
How are you going to conduct it? (a brief statement of intended research methods)

An appropriate aim clearly defines the research purpose without confusing the reader. If you struggle to explain your research and its importance in simpler terms, you should consider refining your research to clarify it further.

Writing objectives

The objectives describe how you would achieve your research aim. You can do this through the following steps,

The first one to two objectives can be applied to the literature review . (Verbs to be used: investigate, examine, study)
One objective can be applied to the methodology portion. (Verbs to be used: collect, select, demonstrate, estimate)
Two to three objectives can cover the critical evaluation or discussion chapters (Verbs to be used: analyze, compare, evaluate)
The final objective will cover the conclusion or recommendation portion. (Verbs to be used: conclude, recommend)

Instead of writing like a paragraph, the objectives should be written as a numbered list to give them more clarity.

How many aims and objectives should be there?

It depends upon the topic of your research and mainly upon your supervisor’s requirements. Generally, a dissertation has a single broad statement as the research aim. However, it is acceptable to include a main aim along with two to three subsidiary aims.

Similarly, the number of objectives should be realistic and sufficient to measure the progress regarding the achievement of the research aim. Their number can generally vary from three to six depending upon the aim.

Common mistakes to avoid while writing research aims and objectives

Writing a broad research aim

Writing a broad research aim is a common mistake, and it often becomes difficult to achieve. It may create a problem when you are asked to prove how you have achieved your aims during your viva defense . It would be best to narrow your study to a specific area in the early stages of the dissertation.

Formulating overlapping research objectives

The objectives should be written such that they are measurable and distinct from each other. If they overlap, it makes it difficult to structure your dissertation properly in specific chapters.

Setting unrealistic aims

Students often get over-ambitious while describing the research aim and face problems afterward in achieving those aims. You should avoid this mistake and be realistic about what you can achieve in the available time and resources.

Aims and objectives are the sections that require significant time and attention to avoid future hassles while conducting research and writing your dissertation.

Frequently Asked Questions

How to set dissertation aims and objectives.

To set dissertation aims and objectives, define your research goals clearly. Aims state what you want to achieve, while objectives outline specific, measurable steps to reach those goals. Ensure they align with your research question and contribute to your study’s significance.

Dissertations and research projects

Book a session
Planning your research
Qualitative research
Quantitative research

Introductions

Literature review, methodology, conclusions, working with your supervisor.

e-learning and books
SkillsCheck This link opens in a new window
⬅ Back to Skills Centre This link opens in a new window
Review this resource

What is an abstract?

The abstract is a brief summary of your dissertation to help a new reader understand the purpose and content of the document, in much the same way as you would read the abstract of a journal article to help decide whether it was relevant to your work. The function of the abstract is to describe and summarise the contents of the dissertation, rather than making critical or evaluative statements about the project.

When should I write the abstract?

The abstract should be the last section you write before submitting your final dissertation or extended project report, as the content will only be decided once the main document is complete.

What should I include?

One of the best ways to find the right ‘voice’ for the abstract is to look at other examples, either from dissertations in your field or study, or from journal articles. Look out for examples that you feel communicate complex ideas in a simple and accessible way. Your abstract should be clear and understandable to a non-specialist, so avoid specialist vocabulary as far as possible, and use simple sentence structures over longer more complex constructions. You can find a list of phrases for abstract writing here .

Most abstracts are written in the present tense, but this may differ in some disciplines, so find examples to inform your decision on how to write. Avoid the future tense - ‘this dissertation will consider’ - as the research has already been completed by the time someone is reading the abstract! You can explore some key phrases to use in abstract writing here.

Examples of dissertation abstracts Dissertation abstracts, University of Leeds Overview of what to include in your abstract, University of Wisconsin - Madison Abstract structures from different disciplines, The Writing Center For examples from Sheffield Hallam University, use the 'Advanced Search' function in Library Search to access ‘Dissertations/Theses’.

What should the introduction include?

Your introduction should cover the following points:.

Provide context and set the scene for your research project using literature where necessary.
Explain the rationale and value of the project.
Provide definitions and address general limitations in the literature that have influenced the topic or scope of your project.
Present your research aims and objectives, which may also be phrased as the research ‘problem’ or questions.

Although it is important to draft your research aims and objectives early in the research process, the introduction will be one of the last sections you write. When deciding on how much context and which definitions to include in this section, remember to look back at your literature review to avoid any repetition. It may be that you can repurpose some of the early paragraphs in the literature review for the introduction.

What is the ‘research aim’?

The research aim is a mission statement, that states the main ambition of your project. in other words, what does your research project hope to achieve you may also express this as the ‘big questions’ that drives your project, or as the research problem that your dissertation will aim to address or solve..

You only need one research aim, and this is likely to change as your dissertation develops through the literature review. Keep returning to your research aim and your aspirations for the project regularly to help shape this statement.

What are the research objectives? How are they different from research questions?

Research objectives and questions are the same thing – the only difference is how they are written! The objectives are the specific tasks that you will need to complete – the stepping stones – that will enable you to achieve your overall research aim.

You will usually have 3-5 research objectives, and their order will hep the reader to understand how you will progress through your research project from start to finish. If you can achieve each objective, or answer each research question, you should meet your research aim! It is therefore important to be specific in your choice of language: verbs, such as ‘to investigate’, ‘to explore’, ‘to assess’ etc. will help your research appear “do-able” (Farrell, 2011).

Here’s an example of three research objectives, also phrased as research questions (this depends entirely on your preference):

For more ideas on how to write research objectives, take at look at this list of common academic verbs for creating specific, achievable research tasks and questions.

We have an online study guide dedicated to planning and structuring your literature review.

What is the purpose of the methodology section?

The methodology outlines the procedure and process of your data collection. You should therefore provide enough detail so that a reader could replicate or adapt your methodology in their own research.

While the literature review focuses on the views and arguments of other authors, the methodology puts the spotlight on your project. Two of the key questions you should aim to answer in this section are:

Why did you select the methods you used?
How do these methods answer your research question(s)?

The methodology chapter should also justify and explain your choice of methodology and methods. At every point where you faced a decision, ask: Why did choose this approach? Why not something else? Why was this theory/method/tool the most relevant or suitable for my project? How did this decision contribute to answering my research questions?

Although most students write their methodology before carrying out their data collection, the methodology section should be written in the past tense, as if the research has already been completed.

What is the difference between my methodology and my methods?

There are three key aspects of any methodology section that you should aim to address:.

Methodology: Your choice of methodology will be grounded in a discipline-specific theory about how research should proceed, such as quantitative or qualitative. This overarching decision will help to provide rationale for the specific methods you go on to use.
Research Design: An explanation of the approach that you have chosen, and the type of data you will collect. For example, case study or action research? Will the data you collect be quantitative, qualitative or a mix of both?
Methods: The concrete research tools used to collect and analyse data: questionnaires, in-person surveys, observations etc.

You may also need to include information on epistemology and your philosophical approach to research. You can find more information on this in our research planning guide.

What should I include in the methodology section?

Research paradigm: What is the underpinning philosophy of your research? How does this align with your research aim and objectives?

Methodology : Qualitative or quantitative? Mixed? What are the advantages of your chosen methodology, and why were the other options discounted?

Research design : Show how your research design is influenced by other studies in your field and justify your choice of approach.
Methods : What methods did you use? Why? Do these naturally fit together or do you need to justify why you have used different methods in combination?
Participants/Data Sources: What were your sources/who were your participants? Which sampling approach did you use and why? How were they identified as a suitable group to research, and how were they recruited?
Procedure : What did you do to collect your data? Remember, a reader should be able to replicate or adapt your methodology in their own research from the information you provide here.
Limitations : What are the general limitations of your chosen method(s)? Don’t be specific here about your project (ie. what you could have done differently), but instead focus on what the literature outlines as the disadvantages of your methods.

Should I reflect on my position as a researcher?

If you feel your position as a researcher has influenced your choice of methods or procedure in any way, the methodology is a good place to reflect on this. Positionality acknowledges that no researcher is entirely objective: we are all, to some extent, influenced by prior learning, experiences, knowledge, and personal biases. This is particularly true in qualitative research or practice-based research, where the student is acting as a researcher in their own workplace, where they are otherwise considered a practitioner/professional.

The following questions can help you to reflect on your positionality and gauge whether this is an important section to include in your dissertation (for some people, this section isn’t necessary or relevant):

How might my personal history influence how I approach the topic?
How am I positioned in relation to this knowledge? Am I being influenced by prior learning or knowledge from outside of this course?
How does my gender/social class/ ethnicity/ culture influence my positioning in relation to this topic?
Do I share any attributes with my participants? Are we part of a s hared community? How might this have influenced our relationship and my role in interviews/observations?
Am I invested in the outcomes on a personal level? Who is this research for and who will feel the benefits?

Visit our detailed guides on qualitative and quantitative research for more information.

Quantitative projects
Qualitative projects

T he purpose of this section is to report the findings of your study. In quantitative research, the results section usually functions as a statement of your findings without discussion.

Results sections generally begin with descriptive statistics before moving on to further tests such as multiple linear regression, or inferential statistical tests such as ANOVA, and any associated Post-Hoc testing.

Here are some top tips for planning/writing your results section:

Explain any treatments you have applied to your data.
Present your findings in a logical order.
Describe trends in the data/anomalous findings but don’t start to interpret them. Save that for your discussion section.
Figures and tables are usually the clearest way to present information. It is important to remember to title and label any titles/diagrams to communicate their meaning to the reader and so that you can refer to them again later in the report (e.g. Table 1).
Remember to be consistent with the rounding of figures. If you start by rounding to 2 decimal places, ensure that you do this for all data you report.
Avoid repeating any information - if something appears in a table it does not need to appear again in the main body of the text.

Presenting qualitative data

In qualitative studies, your results are often presented alongside the discussion, as it is difficult to include this data in a meaningful way without explanation and interpretation. In the dsicussion section, aim to structure your work thematically, moving through the key concepts or ideas that have emerged from your qualitative data. Use extracts from your data collection - interviews, focus groups, observations - to illustrate where these themes are most prominent, and refer back to the sources from your literature review to help draw conclusions.

Here's an example of how your data could be presented in paragraph format in this section:

Example from 'Reporting and discussing your findings ', Monash University .

What should I include in the discussion section?

The purpose of the discussion section is to interpret your findings and discuss these against the context of the wider literature. This section should also highlight how your research has contributed to the understanding of a phenomenon or problem: this can be achieved by responding to your research questions.

Though the structure of discussion sections can vary, a relatively common structure is offered below:

State your major findings – this can be a brief opening paragraph that restates the research problem, the methods you used to attempt to address this, and the major findings of your research.
Address your research questions - detail your findings in relation to each of your research questions to help demonstrate how you have attempted to address the research problem. Answer each research question in turn by interpreting the relevant results: this may involve highlighting patterns, relationships or statistically significant differences depending on the design of your research and how you analysed your data.
Discuss your findings against the wider literature - this will involve comparing and contrasting your findings against those of others and using key literature to support the interpretation of your results; often, this will involve revisiting key studies from your literature review and discussing where your findings fit in the pre-existing literature. This process can help to highlight the importance of your research through demonstrating what is novel about your findings and how this contributes to the wider understanding of your research area.
Address any unexpected findings in your study - begin with by stating the unexpected finding and then offer your interpretation as to why this might have occurred. You may relate unexpected findings to other research literature and you should also consider how any unexpected findings relate to your overall study – especially if you think this is significant in terms of what your findings contribute to the understanding of your research problem!
Discuss alternative interpretations - it’s important to remember that in research we find evidence to support ideas, theories and understanding; nothing is ever proven. Consequently, you should discuss possible alternative interpretations of your data – not just those that neatly answer your research questions and confirm your hypotheses.
Limitations/weaknesses of your research – acknowledge any factors that might have affected your findings and discuss how this relates to your interpretation of the data. This might include detailing problems with your data collection method, or unanticipated factors that you had not accounted for in your original research plan. Likewise, detail any questions that your findings could not answer and explain why this was the case.
Future directions (this part of your discussion could also be included in your conclusion) – this section should address what questions remain unanswered about your research problem. For example, it may be that your findings have answered some questions but raised new ones; this can often occur as a result of unanticipated findings. Likewise, some of the limitations of your research may necessitate further work to address a methodological confound or weakness in a tool of measurement. Whatever these future directions are, remember you’re not writing a proposal for this further research; a brief suggestion of what the research should do and how this would address one of the new problems/limitations you have identified is enough.

Here are some final top tips for writing your discussion section:

Don’t rewrite your results section – remember your goal is to interpret and explain how your findings address the research problem.
Be clear about what you have found, how this has addressed a gap in the literature and how it changes our understanding of your research problem.
Structure your discussion in a logical way that highlights your most important/interesting findings first.
Be careful about how you interpret your data: be wary over-interpreting to confirm a hypothesis. Remember, we can still learn from non-significant research findings.
Avoid being apologetic or too critical when discussing the limitations of your research. Be concise and analytical.

How do I avoid repetition in the conclusion?

The conclusion is your opportunity to synthesise everything you have done/written as part of your research, in order to demonstrate your understanding.

A well-structured conclusion is likely to include the following:

State your conclusions – in clear language, state the conclusions from your research. Crucially, this not just restating your results/findings: instead, this is a synthesis of the research problem, your research questions, your findings (and interpretation), and the relevant research literature. From your conclusions, it should be clear to your reader how our understanding of the research topic has changed.
Discuss wider significance – this is your opportunity to highlight (potential) wider implications of your conclusions. Depending on your discipline, this might include recommendations for policy, professional practice or a tentative speculation about how an academic theory might change given your findings. It is important not to over-generalise here; remember the limitations of your theoretical and methodological choices and what these mean for the applicability of your findings/conclusions. If your discipline encourages reflection, this can be a suitable place to include your thoughts about the research process, the choices you made and how your findings/conclusions might influence your professional outlook/practice going forwards.
Take home message – this should be a strong and clear final statement that draws the reader’s focus to the primary message of your study. Whilst it’s important to avoid being overly grandiose, this is your closing argument, and you should remind the reader of what your research has achieved.

Ultimately, your conclusion is your final word about the research problem you have investigated; don’t be afraid of emphasising your contribution to the understanding of that problem. Your conclusion should be clear, succinct and provide a summary of everything that has been learned as a result of your research project.

What supervisors expect from their dissertation students:

to determine the focus and direction of the dissertation, particularly in terms of identifying a topic of interest and research question.
to work independently to explore literature and research in the chosen topic area.
to be proactive in arranging supervision meetings, email draft work before meetings for feedback and prepare specific questions and issues to discuss in supervision time.
to be honest and open about any challenges or difficulties that arise during the research or writing process.
to bring a problem-solving approach to the dissertation (you are not expected to know all the answers but should show initiative in exploring possible solutions to any problems that might arise).

What you can expect from your supervisor:

to offer guidance on the best way to structure and carry out a successful research project in the timescale for your dissertation, and to help you to set achievable and appropriate research objectives.
to act as an expert in your discipline and sounding board for your ideas, and to advise you on the literature search and theoretical background for your project.
to serve as a 'lifeline' and point of support when the dissertation feels challenging.
to read your drafts and give feedback in supervision meetings.
to offer practical advice and strategies for managing your time, securing ethics approval, collecting data and common pitfalls to avoid during the research process.

Making the most of your supervision meetings

Meeting your supervisor can feel daunting at first but your supervision meetings offer a great opportunity to discuss your research ideas and get feedback on the direction of your project. Here are our top tips to getting the most out of time with your supervisor:

Y ou are in charge of the agenda. If you arrange a meeting with your supervisor, you call the shots! Here are a few tips on how to get the most out of the time with your supervisor.
Send an email in advance of the meeting , with an overview of the key ideas you want to talk about. This can save time in the meeting and helps to give you some structure to follow. If this isn't possible, run through these points quickly when you first sit down as you introduce the meeting - "I wanted to focus on the literature review today, as I'm having some trouble deciding on the order my key themes and points should be introduced in."
What do you want to get out of the meeting? Note down any questions you would like the answers to or identify what it is you will need from the meeting in order to make progress on the next stage of your dissertation. Supervision meetings offer the change to talk about your ideas for the project, but they can also be an opportunity to find out practical details and troubleshoot. Don't leave the meeting until you have addressed these and got answers/advice in each key area.
Trust your supervisor. Your supervisor may not be an expert in your chosen subject, but they will have experience of writing up research projects and coaching other dissertation students. You are responsible for reading up on your subject and exploring the literature - your supervisor can't tell you what to read, but they can give you advice on how to read your sources and integrate them into your argument and writing.
Choose a short section to discuss in the meeting for feedback - for example, if you're not sure on structure, pick a page or two that demonstrate this, or if you want advice on being critical, find an example from a previous essay where you think you did this well and ask your supervisor how to translate this into dissertation writing.
Agree an action plan . Work with your supervisor to set a goal for your next meeting, or an objective that you will meet in the week following your supervision. Feeling accountable to someone can be a great motivator and also helps you to recognise where you are starting to fall behind the targets that you've set for yourself.
Be open and honest . It can feel daunting meeting your supervisor, but supervision meetings aren't an interview where you have to prove everything is going well. Ask for help and advice where you need it, and be honest if you're finding things difficult. A supervisor is there to support you and help you to develop the skills and knowledge you need along the journey to submitting your dissertation.
<< Previous: Quantitative research
Next: e-learning and books >>
Last Updated: Apr 17, 2024 1:52 PM
URL: https://libguides.shu.ac.uk/researchprojects

Frequently asked questions

What’s the difference between research aims and objectives.

A research aim is a broad statement indicating the general purpose of your research project. It should appear in your introduction at the end of your problem statement , before your research objectives.

Research objectives are more specific than your research aim. They indicate the specific ways you’ll address the overarching aim.

Ask our team

Want to contact us directly? No problem. We are always here for you.

Chat with us
Email [email protected]
Call +44 (0)20 3917 4242
WhatsApp +31 20 261 6040

Our support team is here to help you daily via chat, WhatsApp, email, or phone between 9:00 a.m. to 11:00 p.m. CET.

Our APA experts default to APA 7 for editing and formatting. For the Citation Editing Service you are able to choose between APA 6 and 7.

Yes, if your document is longer than 20,000 words, you will get a sample of approximately 2,000 words. This sample edit gives you a first impression of the editor’s editing style and a chance to ask questions and give feedback.

How does the sample edit work?

You will receive the sample edit within 24 hours after placing your order. You then have 24 hours to let us know if you’re happy with the sample or if there’s something you would like the editor to do differently.

Read more about how the sample edit works

Yes, you can upload your document in sections.

We try our best to ensure that the same editor checks all the different sections of your document. When you upload a new file, our system recognizes you as a returning customer, and we immediately contact the editor who helped you before.

However, we cannot guarantee that the same editor will be available. Your chances are higher if

You send us your text as soon as possible and
You can be flexible about the deadline.

Please note that the shorter your deadline is, the lower the chance that your previous editor is not available.

If your previous editor isn’t available, then we will inform you immediately and look for another qualified editor. Fear not! Every Scribbr editor follows the Scribbr Improvement Model and will deliver high-quality work.

Yes, our editors also work during the weekends and holidays.

Because we have many editors available, we can check your document 24 hours per day and 7 days per week, all year round.

If you choose a 72 hour deadline and upload your document on a Thursday evening, you’ll have your thesis back by Sunday evening!

Yes! Our editors are all native speakers, and they have lots of experience editing texts written by ESL students. They will make sure your grammar is perfect and point out any sentences that are difficult to understand. They’ll also notice your most common mistakes, and give you personal feedback to improve your writing in English.

Every Scribbr order comes with our award-winning Proofreading & Editing service , which combines two important stages of the revision process.

For a more comprehensive edit, you can add a Structure Check or Clarity Check to your order. With these building blocks, you can customize the kind of feedback you receive.

You might be familiar with a different set of editing terms. To help you understand what you can expect at Scribbr, we created this table:

View an example

When you place an order, you can specify your field of study and we’ll match you with an editor who has familiarity with this area.

However, our editors are language specialists, not academic experts in your field. Your editor’s job is not to comment on the content of your dissertation, but to improve your language and help you express your ideas as clearly and fluently as possible.

This means that your editor will understand your text well enough to give feedback on its clarity, logic and structure, but not on the accuracy or originality of its content.

Good academic writing should be understandable to a non-expert reader, and we believe that academic editing is a discipline in itself. The research, ideas and arguments are all yours – we’re here to make sure they shine!

After your document has been edited, you will receive an email with a link to download the document.

The editor has made changes to your document using ‘Track Changes’ in Word. This means that you only have to accept or ignore the changes that are made in the text one by one.

It is also possible to accept all changes at once. However, we strongly advise you not to do so for the following reasons:

You can learn a lot by looking at the mistakes you made.
The editors don’t only change the text – they also place comments when sentences or sometimes even entire paragraphs are unclear. You should read through these comments and take into account your editor’s tips and suggestions.
With a final read-through, you can make sure you’re 100% happy with your text before you submit!

You choose the turnaround time when ordering. We can return your dissertation within 24 hours , 3 days or 1 week . These timescales include weekends and holidays. As soon as you’ve paid, the deadline is set, and we guarantee to meet it! We’ll notify you by text and email when your editor has completed the job.

Very large orders might not be possible to complete in 24 hours. On average, our editors can complete around 13,000 words in a day while maintaining our high quality standards. If your order is longer than this and urgent, contact us to discuss possibilities.

Always leave yourself enough time to check through the document and accept the changes before your submission deadline.

Scribbr is specialised in editing study related documents. We check:

Graduation projects
Dissertations
Admissions essays
College essays
Application essays
Personal statements
Process reports
Reflections
Internship reports
Academic papers
Research proposals
Prospectuses

Calculate the costs

The fastest turnaround time is 24 hours.

You can upload your document at any time and choose between three deadlines:

At Scribbr, we promise to make every customer 100% happy with the service we offer. Our philosophy: Your complaint is always justified – no denial, no doubts.

Our customer support team is here to find the solution that helps you the most, whether that’s a free new edit or a refund for the service.

Yes, in the order process you can indicate your preference for American, British, or Australian English .

If you don’t choose one, your editor will follow the style of English you currently use. If your editor has any questions about this, we will contact you.

404 Not found

PRDV009: Writing Grant Proposals

Aims vs. objectives.

Read this article for its distinction between aims and objectives. It also provides useful advice on "what not to do" with aims and objectives.

You are ready, you are aimed, and now you have to fire off the objectives. But you are a bit confused. What is the difference between the two?

An aims-objectives confusion might arise when you are writing a thesis proposal and the introductory thesis chapter. It is always an issue in research bids. The what is-the-difference question can have you going around in ever smaller unproductive circles if you cannot figure out a way to differentiate between the two things. And the difference is something I have recently been asked about, so I have decided to post something of an answer.

Dictionaries are only vaguely helpful when thinking about aims and objectives. My desk dictionary says that an aim is to do with giving direction. An aim is "something intended or desired to be obtained by your efforts". On the other hand an objective is to do with achieving an object, it is about actions, "pertaining to that whose delineation is known". Now, who actually speaks like this? The fact that these definitions are offered in this very formal language does not help clarify matters. But, once past the antiquated expression, you might discern that the difference between the two is somehow related to a hope or ambition (aim) versus a material action (objective). Or we might say – and it is what is commonly said about aims and objectives – the aim is the what of the research, and the objective is the how .

So taking this what-how as a kind of loose and sloppy differentiation between the two, the rough rule of thumb with aims and objectives is generally that:

(1) The aim is about what you hope to do, your overall intention in the project. It signals what and/or where you aspire to be by the end. It is what you want to know. It is the point of doing the research. An aim is therefore generally broad. It is ambitious, but not beyond possibility.

The convention is that an aim is usually written using an infinitive verb – that is, it is a to + action . So aims often start something like... My aim in this project is … to map, to develop, to design, to track, to generate, to theorize, to build …

Sometimes in the humanities and social sciences, we have aims that attempt to acknowledge the inevitable partiality of what we do, so we aim "to investigate, to understand, and to explore…"

But lots of project reviewers and supervisors prefer to see something less tentative than this – they want something much less ambivalent, something more like to synthesize, to catalogue, to challenge, to critically interrogate ….

(2) The objectives , and there are usually more than one, are the specific steps you will take to achieve your aim. This is where you make the project tangible by saying how you are going to go about it.

Objectives are often expressed through active sentences. So, objectives often start something like In order to achieve this aim, I will … collect, construct, produce, test, trial, measure, document, pilot, deconstruct, analyze …

Objectives are often presented as a (1) (2) (3) formatted list – this makes visible the sequence of big steps in the project. The list of objectives spells out what you actually and really will do to get to the point of it all.

You have to make the objectives relatively precise . Having a bunch of vague statements is not very helpful – so "I will investigate" or "I will explore" for example are not particularly useful ways to think about the research objectives. How will you know when an investigation has ended? How will you draw boundaries around an exploration? In thinking about the answer to these questions, you are likely to come up with the actual objectives.

Objectives have to be practical, do-able, and achievable . Research reviewers generally look to see if the time and money available for the research will genuinely allow the researcher to achieve their objectives. They also look to see if the objectives are possible, actually research-able.

Because the objectives also act as project milestones , it is helpful to express them as things that are able to be completed – so for example scoping an archive of materials will have an endpoint which may then lead on to a next stage/objective. Even if objectives are to occur simultaneously, rather than one after the other, it is important to be clear about what the endpoint of each step/objective will be, and how it will help achieve the aim.

What Not To Do

It is really helpful to think about what can go wrong with aims and objectives. There are some predictable problems that you want to avoid when writing them. These are some common aims-objectives issues:

There are too many aims. One or two is usually enough. (I might stretch to three for other people's projects if pushed, but I usually have only one for my own projects.)
Aims and objectives waffle around, they do not get to the point and the reader does not have a clue what is actually intended and will be done – aims and objectives need to be concise and economically expressed.
Aims and objectives do not connect – the steps that are to be taken do not match up with the overall intention.
The aims and the objectives are not differentiated, they are basically the same things but said in different words.
The objectives are a detailed laundry list rather than a set of stages in the research. The objectives do not stack up with the research methods – in other words, they are either not do-able, or what is to be done will not achieve the desired results.

The final thing to say is that aims and objectives cannot be rushed. Because they generate the research questions and underpin the research design, sorting the aims and objectives are a crucial early stage in planning a research project. Aims and objectives are a foundation on which the entire project is constructed, so they need to be sturdy and durable.

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Publications
Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

Advanced Search
Journal List
v.53(4); 2010 Aug

Research questions, hypotheses and objectives

Patricia farrugia.

* Michael G. DeGroote School of Medicine, the

Bradley A. Petrisor

† Division of Orthopaedic Surgery and the

Forough Farrokhyar

‡ Departments of Surgery and

§ Clinical Epidemiology and Biostatistics, McMaster University, Hamilton, Ont

Mohit Bhandari

There is an increasing familiarity with the principles of evidence-based medicine in the surgical community. As surgeons become more aware of the hierarchy of evidence, grades of recommendations and the principles of critical appraisal, they develop an increasing familiarity with research design. Surgeons and clinicians are looking more and more to the literature and clinical trials to guide their practice; as such, it is becoming a responsibility of the clinical research community to attempt to answer questions that are not only well thought out but also clinically relevant. The development of the research question, including a supportive hypothesis and objectives, is a necessary key step in producing clinically relevant results to be used in evidence-based practice. A well-defined and specific research question is more likely to help guide us in making decisions about study design and population and subsequently what data will be collected and analyzed. 1

Objectives of this article

In this article, we discuss important considerations in the development of a research question and hypothesis and in defining objectives for research. By the end of this article, the reader will be able to appreciate the significance of constructing a good research question and developing hypotheses and research objectives for the successful design of a research study. The following article is divided into 3 sections: research question, research hypothesis and research objectives.

Research question

Interest in a particular topic usually begins the research process, but it is the familiarity with the subject that helps define an appropriate research question for a study. 1 Questions then arise out of a perceived knowledge deficit within a subject area or field of study. 2 Indeed, Haynes suggests that it is important to know “where the boundary between current knowledge and ignorance lies.” 1 The challenge in developing an appropriate research question is in determining which clinical uncertainties could or should be studied and also rationalizing the need for their investigation.

Increasing one’s knowledge about the subject of interest can be accomplished in many ways. Appropriate methods include systematically searching the literature, in-depth interviews and focus groups with patients (and proxies) and interviews with experts in the field. In addition, awareness of current trends and technological advances can assist with the development of research questions. 2 It is imperative to understand what has been studied about a topic to date in order to further the knowledge that has been previously gathered on a topic. Indeed, some granting institutions (e.g., Canadian Institute for Health Research) encourage applicants to conduct a systematic review of the available evidence if a recent review does not already exist and preferably a pilot or feasibility study before applying for a grant for a full trial.

In-depth knowledge about a subject may generate a number of questions. It then becomes necessary to ask whether these questions can be answered through one study or if more than one study needed. 1 Additional research questions can be developed, but several basic principles should be taken into consideration. 1 All questions, primary and secondary, should be developed at the beginning and planning stages of a study. Any additional questions should never compromise the primary question because it is the primary research question that forms the basis of the hypothesis and study objectives. It must be kept in mind that within the scope of one study, the presence of a number of research questions will affect and potentially increase the complexity of both the study design and subsequent statistical analyses, not to mention the actual feasibility of answering every question. 1 A sensible strategy is to establish a single primary research question around which to focus the study plan. 3 In a study, the primary research question should be clearly stated at the end of the introduction of the grant proposal, and it usually specifies the population to be studied, the intervention to be implemented and other circumstantial factors. 4

Hulley and colleagues 2 have suggested the use of the FINER criteria in the development of a good research question ( Box 1 ). The FINER criteria highlight useful points that may increase the chances of developing a successful research project. A good research question should specify the population of interest, be of interest to the scientific community and potentially to the public, have clinical relevance and further current knowledge in the field (and of course be compliant with the standards of ethical boards and national research standards).

FINER criteria for a good research question

Adapted with permission from Wolters Kluwer Health. 2

Whereas the FINER criteria outline the important aspects of the question in general, a useful format to use in the development of a specific research question is the PICO format — consider the population (P) of interest, the intervention (I) being studied, the comparison (C) group (or to what is the intervention being compared) and the outcome of interest (O). 3 , 5 , 6 Often timing (T) is added to PICO ( Box 2 ) — that is, “Over what time frame will the study take place?” 1 The PICOT approach helps generate a question that aids in constructing the framework of the study and subsequently in protocol development by alluding to the inclusion and exclusion criteria and identifying the groups of patients to be included. Knowing the specific population of interest, intervention (and comparator) and outcome of interest may also help the researcher identify an appropriate outcome measurement tool. 7 The more defined the population of interest, and thus the more stringent the inclusion and exclusion criteria, the greater the effect on the interpretation and subsequent applicability and generalizability of the research findings. 1 , 2 A restricted study population (and exclusion criteria) may limit bias and increase the internal validity of the study; however, this approach will limit external validity of the study and, thus, the generalizability of the findings to the practical clinical setting. Conversely, a broadly defined study population and inclusion criteria may be representative of practical clinical practice but may increase bias and reduce the internal validity of the study.

PICOT criteria 1

A poorly devised research question may affect the choice of study design, potentially lead to futile situations and, thus, hamper the chance of determining anything of clinical significance, which will then affect the potential for publication. Without devoting appropriate resources to developing the research question, the quality of the study and subsequent results may be compromised. During the initial stages of any research study, it is therefore imperative to formulate a research question that is both clinically relevant and answerable.

Research hypothesis

The primary research question should be driven by the hypothesis rather than the data. 1 , 2 That is, the research question and hypothesis should be developed before the start of the study. This sounds intuitive; however, if we take, for example, a database of information, it is potentially possible to perform multiple statistical comparisons of groups within the database to find a statistically significant association. This could then lead one to work backward from the data and develop the “question.” This is counterintuitive to the process because the question is asked specifically to then find the answer, thus collecting data along the way (i.e., in a prospective manner). Multiple statistical testing of associations from data previously collected could potentially lead to spuriously positive findings of association through chance alone. 2 Therefore, a good hypothesis must be based on a good research question at the start of a trial and, indeed, drive data collection for the study.

The research or clinical hypothesis is developed from the research question and then the main elements of the study — sampling strategy, intervention (if applicable), comparison and outcome variables — are summarized in a form that establishes the basis for testing, statistical and ultimately clinical significance. 3 For example, in a research study comparing computer-assisted acetabular component insertion versus freehand acetabular component placement in patients in need of total hip arthroplasty, the experimental group would be computer-assisted insertion and the control/conventional group would be free-hand placement. The investigative team would first state a research hypothesis. This could be expressed as a single outcome (e.g., computer-assisted acetabular component placement leads to improved functional outcome) or potentially as a complex/composite outcome; that is, more than one outcome (e.g., computer-assisted acetabular component placement leads to both improved radiographic cup placement and improved functional outcome).

However, when formally testing statistical significance, the hypothesis should be stated as a “null” hypothesis. 2 The purpose of hypothesis testing is to make an inference about the population of interest on the basis of a random sample taken from that population. The null hypothesis for the preceding research hypothesis then would be that there is no difference in mean functional outcome between the computer-assisted insertion and free-hand placement techniques. After forming the null hypothesis, the researchers would form an alternate hypothesis stating the nature of the difference, if it should appear. The alternate hypothesis would be that there is a difference in mean functional outcome between these techniques. At the end of the study, the null hypothesis is then tested statistically. If the findings of the study are not statistically significant (i.e., there is no difference in functional outcome between the groups in a statistical sense), we cannot reject the null hypothesis, whereas if the findings were significant, we can reject the null hypothesis and accept the alternate hypothesis (i.e., there is a difference in mean functional outcome between the study groups), errors in testing notwithstanding. In other words, hypothesis testing confirms or refutes the statement that the observed findings did not occur by chance alone but rather occurred because there was a true difference in outcomes between these surgical procedures. The concept of statistical hypothesis testing is complex, and the details are beyond the scope of this article.

Another important concept inherent in hypothesis testing is whether the hypotheses will be 1-sided or 2-sided. A 2-sided hypothesis states that there is a difference between the experimental group and the control group, but it does not specify in advance the expected direction of the difference. For example, we asked whether there is there an improvement in outcomes with computer-assisted surgery or whether the outcomes worse with computer-assisted surgery. We presented a 2-sided test in the above example because we did not specify the direction of the difference. A 1-sided hypothesis states a specific direction (e.g., there is an improvement in outcomes with computer-assisted surgery). A 2-sided hypothesis should be used unless there is a good justification for using a 1-sided hypothesis. As Bland and Atlman 8 stated, “One-sided hypothesis testing should never be used as a device to make a conventionally nonsignificant difference significant.”

The research hypothesis should be stated at the beginning of the study to guide the objectives for research. Whereas the investigators may state the hypothesis as being 1-sided (there is an improvement with treatment), the study and investigators must adhere to the concept of clinical equipoise. According to this principle, a clinical (or surgical) trial is ethical only if the expert community is uncertain about the relative therapeutic merits of the experimental and control groups being evaluated. 9 It means there must exist an honest and professional disagreement among expert clinicians about the preferred treatment. 9

Designing a research hypothesis is supported by a good research question and will influence the type of research design for the study. Acting on the principles of appropriate hypothesis development, the study can then confidently proceed to the development of the research objective.

Research objective

The primary objective should be coupled with the hypothesis of the study. Study objectives define the specific aims of the study and should be clearly stated in the introduction of the research protocol. 7 From our previous example and using the investigative hypothesis that there is a difference in functional outcomes between computer-assisted acetabular component placement and free-hand placement, the primary objective can be stated as follows: this study will compare the functional outcomes of computer-assisted acetabular component insertion versus free-hand placement in patients undergoing total hip arthroplasty. Note that the study objective is an active statement about how the study is going to answer the specific research question. Objectives can (and often do) state exactly which outcome measures are going to be used within their statements. They are important because they not only help guide the development of the protocol and design of study but also play a role in sample size calculations and determining the power of the study. 7 These concepts will be discussed in other articles in this series.

From the surgeon’s point of view, it is important for the study objectives to be focused on outcomes that are important to patients and clinically relevant. For example, the most methodologically sound randomized controlled trial comparing 2 techniques of distal radial fixation would have little or no clinical impact if the primary objective was to determine the effect of treatment A as compared to treatment B on intraoperative fluoroscopy time. However, if the objective was to determine the effect of treatment A as compared to treatment B on patient functional outcome at 1 year, this would have a much more significant impact on clinical decision-making. Second, more meaningful surgeon–patient discussions could ensue, incorporating patient values and preferences with the results from this study. 6 , 7 It is the precise objective and what the investigator is trying to measure that is of clinical relevance in the practical setting.

The following is an example from the literature about the relation between the research question, hypothesis and study objectives:

Study: Warden SJ, Metcalf BR, Kiss ZS, et al. Low-intensity pulsed ultrasound for chronic patellar tendinopathy: a randomized, double-blind, placebo-controlled trial. Rheumatology 2008;47:467–71.

Research question: How does low-intensity pulsed ultrasound (LIPUS) compare with a placebo device in managing the symptoms of skeletally mature patients with patellar tendinopathy?

Research hypothesis: Pain levels are reduced in patients who receive daily active-LIPUS (treatment) for 12 weeks compared with individuals who receive inactive-LIPUS (placebo).

Objective: To investigate the clinical efficacy of LIPUS in the management of patellar tendinopathy symptoms.

The development of the research question is the most important aspect of a research project. A research project can fail if the objectives and hypothesis are poorly focused and underdeveloped. Useful tips for surgical researchers are provided in Box 3 . Designing and developing an appropriate and relevant research question, hypothesis and objectives can be a difficult task. The critical appraisal of the research question used in a study is vital to the application of the findings to clinical practice. Focusing resources, time and dedication to these 3 very important tasks will help to guide a successful research project, influence interpretation of the results and affect future publication efforts.

Tips for developing research questions, hypotheses and objectives for research studies

Perform a systematic literature review (if one has not been done) to increase knowledge and familiarity with the topic and to assist with research development.
Learn about current trends and technological advances on the topic.
Seek careful input from experts, mentors, colleagues and collaborators to refine your research question as this will aid in developing the research question and guide the research study.
Use the FINER criteria in the development of the research question.
Ensure that the research question follows PICOT format.
Develop a research hypothesis from the research question.
Develop clear and well-defined primary and secondary (if needed) objectives.
Ensure that the research question and objectives are answerable, feasible and clinically relevant.

FINER = feasible, interesting, novel, ethical, relevant; PICOT = population (patients), intervention (for intervention studies only), comparison group, outcome of interest, time.

Competing interests: No funding was received in preparation of this paper. Dr. Bhandari was funded, in part, by a Canada Research Chair, McMaster University.

IMAGES

21 Research Objectives Examples (Copy and Paste)
Formulating Research Aims and Objectives
Study Blog: CRP
Research Aim and Objectives
Aims and Objectives of Research
PPT

VIDEO

Research Aim, Objectives and Questions Mar 13, 2024
The objectives of the project work in economics
How to Write Objectives in Research Proposal
Aims and objectives of education topic#teaching#hppsc
Research Objectives
Nothing_is_impossible #motivation #boards #study motivation

COMMENTS

Aims and Objectives
The research aim focus on what the research project is intended to achieve; research objectives focus on how the aim will be achieved. Research aims are relatively broad; research objectives are specific. Research aims focus on a project's long-term outcomes; research objectives focus on its immediate, short-term outcomes.
Research Questions, Objectives & Aims (+ Examples)
The research aims, objectives and research questions (the golden thread) define the focus and scope (the delimitations) of your research project. In other words, they help ringfence your dissertation or thesis to a relatively narrow domain, so that you can "go deep" and really dig into a specific problem or opportunity.
Research Objectives
A research aim typically refers to a broad statement indicating the general purpose of your research project. It should appear at the end of your problem statement, before your research objectives. Your research objectives are more specific than your research aim and indicate the particular focus and approach of your project.
What Are Research Objectives and How to Write Them (with Examples)
Among the many sections that constitute a research paper, the introduction plays a key role in providing a background and setting the context. 1 Research objectives, which define the aims of the study, are usually stated in the introduction. Every study has a research question that the authors are trying to answer, and the objective is an ...
Research Aims and Objectives: The dynamic duo for successful ...
The research aim should be broad and concise. Develop research objectives: Based on your research questions and research aim, develop specific research objectives that outline what you intend to achieve through your research. These objectives should be specific, measurable, achievable, relevant, and time-bound (SMART).
Formulating Research Aims and Objectives
Formulating research aim and objectives in an appropriate manner is one of the most important aspects of your thesis. This is because research aim and objectives determine the scope, depth and the overall direction of the research. Research question is the central question of the study that has to be answered on the basis of research findings.
What's the difference between research aims and objectives?
A research aim is a broad statement indicating the general purpose of your research project. It should appear in your introduction at the end of your problem statement, before your research objectives. Research objectives are more specific than your research aim. They indicate the specific ways you'll address the overarching aim.
How to Write a Research Proposal
A research aim is a broad statement indicating the general purpose of your research project. It should appear in your introduction at the end of your problem statement, before your research objectives. Research objectives are more specific than your research aim. They indicate the specific ways you'll address the overarching aim.
A Guide to Writing Research Objectives and Aims
Aim focus on what a project proposes to achieve; objectives focus on how the project will achieve its goal. The research objectives are more specific than the research aims. Objectives focus on the short-term and immediate outcomes of a project while aim focus on its long-term outcomes. It would be best to write an objective as a numbered list ...
How to write a research proposal?
Aims and objectives. The research purpose (or goal or aim) gives a broad indication of what the researcher wishes to achieve in the research. The hypothesis to be tested can be the aim of the study. The objectives related to parameters or tools used to achieve the aim are generally categorised as primary and secondary objectives.
Develop the research objectives (Chapter 1)
Summary. The importance of research aims and objectives cannot be over-stressed. It is vital to have a very clear understanding of what the research is about and what you are actually trying to achieve. You need to know this. And you need to be able to communicate it to others. Carrying out a research project is rather like going on a journey.
Research Objectives
Measurability: Well-defined research objectives provide measurable outcomes that can be used to evaluate the success of the research project. This helps to ensure that the research is effective and that the research goals are achieved. Feasibility: Research objectives help to ensure that the research project is feasible. By clearly defining the ...
Essential Ingredients of a Good Research Proposal for Undergraduate and
The research aim and objectives or hypotheses that are based on the research problem or question(s) ... Doing your research project: A guide for first-time researchers in education, health and social science. Maidenhead, UK: McGraw-Hill. Google Scholar. Blaikie N. (1993).
SAGE Research Methods: Find resources to answer your research methods
Click to continue
Q: How do I write the aims and objectives of a research?
The aim of the research is the overall purpose of conducting the research. It could be to add to the knowledge in the area, to address an existing gap in the knowledge, to devise and test a solution to an existing problem, and so on. Objectives are the specific outcomes you expect to achieve through your research and that will enable you to ...
How to Write the Aims and Objectives
Writing objectives. The objectives describe how you would achieve your research aim. You can do this through the following steps, The first one to two objectives can be applied to the literature review. (Verbs to be used: investigate, examine, study) One objective can be applied to the methodology portion.
Dissertations and research projects
Online study guides for every stage of your research project, from planning to writing up. Also includes advice on writing a remote dissertation while social distancing measures are in place. ... Although it is important to draft your research aims and objectives early in the research process, the introduction will be one of the last sections ...
What's the difference between research aims and objectives?
A research aim is a broad statement indicating the general purpose of your research project. It should appear in your introduction at the end of your problem statement, before your research objectives. Research objectives are more specific than your research aim. They indicate the specific ways you'll address the overarching aim.
Research Questions, Objectives & Aims (+ Examples)
The search aims, objectives and research questions ... Simply put, the research aim(s) is a order so reflects the broad transversal goal(s) of the research project. Research aims are fairly high-level (low resolution) as they rough aforementioned general direction of the research and what it's tough to achieve.
PRDV009: Aims vs. Objectives
An aims-objectives confusion might arise when you are writing a thesis proposal and the introductory thesis chapter. It is always an issue in research bids. ... sorting the aims and objectives are a crucial early stage in planning a research project. Aims and objectives are a foundation on which the entire project is constructed, so they need ...
Research Aims and Objectives: The dynamic duo for successful ...
2. Guides research design: The research aim and objectives help guide the research design and methodology, ensuring that your study is designed in a way that will answer the research questions and achieve the research objectives. 3. Helps with resource allocation: Clear research aims and objectives helps you to
How To Write Aims And Objectives For Your Research Project ...
Aims and objectives are an important part of a research project and will usually first be identified during the development of a research proposal or a resea...
Research questions, hypotheses and objectives
The development of the research question is the most important aspect of a research project. A research project can fail if the objectives and hypothesis are poorly focused and underdeveloped. Useful tips for surgical researchers are provided in Box 3. Designing and developing an appropriate and relevant research question, hypothesis and ...
What is Project Planning? Definition and Examples
Project Goals and Objectives: Organize a successful corporate conference that meets the company's objectives and exceeds attendees' expectations. Secure keynote speakers, sponsors, and vendors to enhance the event experience. Ensure the event stays within budget and achieves a high level of attendee satisfaction.

Introduction

What Are Aims and Objectives?

Example of a Research Aim

Research Objectives

Example of a Research Objective

Restructuring Research Objectives as Research Questions

Difference Between Aims and Objectives

How to Write Aims and Objectives

Research Objectives

Table of Research Verbs to Use in Aims and Objectives

Checking Research Objective Example Against Recommended Approach

Mistakes in Writing Research Aims and Objectives

2. Making Your Research Objectives Too Ambitious

3. Formulating Repetitive Research Objectives

Browse PhDs Now

Research Aims, Objectives & Questions

Overview: The Golden Thread

What is the “golden thread”?

Research Aims: What are they?

Research Aims: Examples

Need a helping hand?

Research Objectives: What are they?

Research Objectives: Examples

Research Questions: What are they?

Research Questions: Examples

The importance of strong alignment

Recap: The golden thread

Psst... there’s more!

You Might Also Like:

38 Comments

Submit a Comment Cancel reply

Formulating Research Aims and Objectives

A Guide to Writing Research Objectives and Aims

Introduction

What is Research Aim?

What are Research Objectives?

Understanding the difference between research objectives and aim

How to Write the Aim and Objectives of Research?

شارك هذا الموضوع:

The Importance of Formatting for Academic Research

Editing & Proofreading your Thesis

Research Methodology for Academic Papers

Leave a Reply Cancel reply

Research Objectives – Types, Examples and Writing Guide

Research Objectives

Types of Research Objectives

How to Write Research Objectives

Example of Research Objectives

When to Write Research Objectives

Purpose of Research Objectives

Advantages of Research Objectives

About the author

Muhammad Hassan

You may also like

How to Cite Research Paper – All Formats and...

Data Collection – Methods Types and Examples

Delimitations in Research – Types, Examples and...

Research Paper Format – Types, Examples and...

Research Process – Steps, Examples and Tips

Research Design – Types, Methods and Examples

How to Write the Dissertation Aims and Objectives – Guide & Examples

Differences between aims and objectives

Hire an Expert Writer

How to write aims and objectives?

Writing the aim statement

Writing objectives

How many aims and objectives should be there?

Common mistakes to avoid while writing research aims and objectives

Frequently Asked Questions

You May Also Like

Dissertations and research projects

Introductions

What should the introduction include?

What is the ‘research aim’?

What is the difference between my methodology and my methods?

Frequently asked questions

Ask our team

How does the sample edit work?

404 Not found

PRDV009: Writing Grant Proposals