how to loop a powerpoint presentation

How-To Geek

How to loop a powerpoint presentation.

If you're showing off a lot of photos at a special event, set your presentation to progress at a continuous, automatic loop. Here's how.

Quick Links

Set up your slideshow to be looped, apply automatic slide transitions.

Slideshows are sometimes used to display images at events, such as weddings or trade shows. Whatever the occasion might be, you’ll want to loop your PowerPoint presentation so your guests aren’t staring at a blank screen. Here’s how it’s done.

First, open your PowerPoint presentation in which you would like to loop. Once open, navigate to the “Set Up” group of the “Slide Show” tab and then select the “Set Up Slide Show” button.

The “Set Up Show” window will appear. In the “Show options” group, check the box next to “Loop Continuously until Esc.” Once selected, click “OK” in the bottom-right corner of the window.

Now, when you play your slideshow, it will end only when you press the “Esc” key instead of when you've finished the last slide.

Related: How to Make YouTube Videos Loop Continuously

One caveat: With the way we currently have it set up, the slideshow will proceed only when someone clicks the mouse button. That’s fine if there will be a speaker present at all times. Otherwise, you’ll need to set up automatic slide transitions.

Head back to the “Set Up Show” window by selecting “Set Up Slide Show” in the “Set Up” group of the “Slide Show” tab.

There are a couple of options you need to select, but one important note is that you must first select “Using Timings, If Present” under the “Advance Slides” group.

The next option we select will lock a few things in place (which is why you need to select “Using Timings, If Present” first).

Under the “Show Type” group, select “Browsed at a Kiosk (Full Screen)." The “Loop Continuously until Esc” option will be enabled automatically if you haven’t already turned it on, and the option you’ve selected under “Advance Slides” will remain unchanged.

Select “OK” when ready to proceed.

Without the “Browsed at a Kiosk” option enabled, the automatic slide progressions would be disabled if someone were to press the Back key. With it enabled, the Forward and Back keys are locked, allowing the slideshow to automatically progress unattended without fear of someone breaking it.

Now it’s time to set the timings of the slides. Head over to the “Transitions” tab. In the “Timing” group, check the box next to “After” and set the timing at which you’d like each slide to progress. Note that it doesn’t matter if the box next to “On Mouse Click” is checked or not---it won’t work.

After that, select the “Apply to All” option in the same group.

Now, when you play your slideshow, it will continuously loop without interruption. To exit the slideshow, press the “Esc” button.

How to Loop a PowerPoint Slide Show to Repeat Automatically

Set up a PowerPoint Presentation That Loops or Repeats Continuously

by Avantix Learning Team | Updated November 12, 2021

Applies to: Microsoft ®  PowerPoint ®  2013, 2016, 2019 and 365 (Windows)

You can set up a PowerPoint slide show to loop or repeat automatically. A looping presentation can be used at events, trade shows or even in a reception area in an office. The easiest way to set up a slide show to loop or replay continuously is to apply automatic transitions and then configure Slide Show settings.

Recommended article: 5 PowerPoint Keyboard Shortcuts to Run a Slide Show

Do you want to learn more about PowerPoint? Check out our virtual classroom or in-person PowerPoint courses >

Screenshots in this article are from PowerPoint 365 but are similar in older versions of PowerPoint.

Step 1: Apply transitions to automatically advance slides during a slide show

Transitions occur between slides when you run a slide show.

To apply transitions to automatically advance slides during a slide show:

• In Normal View or Slide Sorter View, display or select a slide.
• Click the Transitions tab in the Ribbon.
• Select a transition in the Transitions gallery (such as Fade).
• Click Effect Options and choose the desired option. Effect Options change depending on the transition you selected.
• In the Timing group, click the arrows beside Duration to set the timing you want (in seconds) for the transition. You may also type a duration.
• In the Timing group, under Advance Slides, deselect or uncheck On mouse click and beside After, select or click the up and down arrows to set the timing to transition to the next slide. You may also type a duration.
• In the Timing group, click Apply to All.

In the Transitions tab in PowerPoint, you can select the type of transition (such as Fade) as well as timing options:

Step 2: Set up a presentation to loop during a slide show

To set up a PowerPoint presentation to loop during a slide show:

• Click the Slide Show tab in the Ribbon and then click Set Up Slide Show. A dialog box appears.
• Under Show type, if you select Presented by a speaker (full screen), the speaker or those watching the slide show will have control over when they advance slides. This is the default setting for slide shows. If you select Browsed by an individual (window), those watching the slide show do NOT have control over when slides advance. If you select Browsed at kiosk (full screen), those watching the slide show do NOT have control over when slides advance and the presentation automatically loops until those watching press Escape (Esc).
• Under Show options, select Loop continuously until 'Esc'. You will be able to select this option if you selected one of the first two options under Show type.

Below is the Set Up Show dialog box with Presented by speaker selected and looping enabled:

If you want to set specific timings for slides to advance or to add narration, check out the article How to Run a PowerPoint Slide Show Automatically (Set Up a Self-Running Presentation) . If you have audio or video in the presentation, you'll need to set the media to play automatically (on the Playback tab in the Ribbon) and animations will also need to be set to run automatically.

Subscribe to get more articles like this one

Did you find this article helpful? If you would like to receive new articles, JOIN our email list.

More resources

How to Embed a YouTube Video in PowerPoint

How to Hide and Unhide Slides in PowerPoint (with Shortcuts)

How to Insert Video in PowerPoint (from a File on Your PC or a Shared Drive)

PowerPoint Keyboard Shortcuts to Play and Control Video During a Slide Show

How to Add Animation in PowerPoint (Animate Images, Text and Other Objects)

Related courses

Microsoft PowerPoint: Intermediate / Advanced

Microsoft PowerPoint: Design for Non-Designers

Microsoft PowerPoint: Animations Bootcamp

Microsoft Excel: Intermediate / Advanced

VIEW MORE COURSES >

Our instructor-led courses are delivered in virtual classroom format or at our downtown Toronto location at 18 King Street East, Suite 1400, Toronto, Ontario, Canada (some in-person classroom courses may also be delivered at an alternate downtown Toronto location). Contact us at [email protected] if you'd like to arrange custom instructor-led virtual classroom or onsite training on a date that's convenient for you.

Copyright 2024 Avantix ® Learning

You may also like

How to Insert or Type E with an Accent Mark in PowerPoint (È, É, Ê, Ë, è, é, ê, or ë)

You can insert or type e with an accent mark in PowerPoint using built-in tools or keyboard shortcuts (including Alt code shortcuts). The letter e can be inserted with an accent in both upper or lower case in text boxes or placeholders on slides, the slide master or layouts. The following are common accents in upper or lower case – È, É, Ê, Ë, è, é, ê, or ë.

How to Fade a Picture or Part of a Picture in PowerPoint (Using a Gradient)

You can fade a picture in PowerPoint by drawing a rectangle shape on top of the picture and then filling the rectangle with a gradient from opaque to transparent. This technique is often used to fade an image into the background of a slide. Since the rectangle is placed on top of the image and then text may be placed on top of the rectangle, you may need to reorder the objects.

How to Lock an Image, Shape or Other Object in PowerPoint

You can now lock an image, shape or other object in PowerPoint. Objects can be locked in Normal View or Slide Master View. Only PowerPoint 365 users can lock objects to prevent moving and resizing. This is helpful if you want to select and move other objects on the slide or prevent others from moving or resizing an object. You can lock items using the context menu or the Selection Pane.

Microsoft, the Microsoft logo, Microsoft Office and related Microsoft applications and logos are registered trademarks of Microsoft Corporation in Canada, US and other countries. All other trademarks are the property of the registered owners.

Avantix Learning |18 King Street East, Suite 1400, Toronto, Ontario, Canada M5C 1C4 | Contact us at [email protected]

Our Courses

Avantix Learning courses are offered online in virtual classroom format or as in-person classroom training. Our hands-on, instructor-led courses are available both as public scheduled courses or on demand as a custom training solution.

All Avantix Learning courses include a comprehensive course manual including tips, tricks and shortcuts as well as sample and exercise files.

VIEW COURSES  >

Contact us at  [email protected]  for more information about any of our courses or to arrange custom training.

Privacy Overview

Pin it on pinterest.

• Print Friendly

How to loop a PowerPoint slideshow so that it automatically starts over as soon as it ends

• To loop a PowerPoint slideshow, you'll need to enable looping in the "Set Up Slide Show" menu.
• Once you set your PowerPoint to loop, it'll start over from the beginning automatically after playing the last slide.
• Visit Business Insider's Tech Reference library for more stories .

If you've designed a Microsoft PowerPoint presentation that's meant to be viewed repeatedly, such as on a kiosk or in a museum installation, you can adjust the settings in PowerPoint so that your slideshow "loops" instead of ending after one viewing.

Getting a PowerPoint to loop is easy. Read on to find out how, using PowerPoint for both Mac and PC.

Check out the products mentioned in this article:

Microsoft office (from $149.99 at best buy), apple macbook pro (from $1,299.00 at apple), acer chromebook 15 (from $179.99 at walmart), how to loop a powerpoint presentation.

1. Open the Microsoft PowerPoint presentation that you want to loop.

2. With your PowerPoint presentation open, click on the "Slide Show" tab, then click on "Set Up Slide Show." 

3. In the pop-up window that appears, click on the box next to "Loop continuously until 'Esc'" so that a small checkmark appears inside the box. Feel free to adjust any other settings in this menu as well. Click "OK" when you're finished.

4. To test whether your PowerPoint can loop successfully, click on the "From Beginning" or "Play From Start" button in the Slide Show tab. Click through the slideshow until you reach the end. When your PowerPoint reaches its final slide, it should start over from the beginning automatically. When you're confident that looping is enabled, and you're ready to close the slide show, press the Esc key.

Related coverage from  Tech Reference :

How to add a border to slides in powerpoint, and give your slideshow a sleek design, how to embed a youtube video into your microsoft powerpoint presentations using a mac or pc, how to convert google slides to a powerpoint presentation in 4 easy steps, how to create a custom powerpoint template to use or share with others, how to copy or duplicate a powerpoint slide and put it anywhere in your slideshow.

Insider Inc. receives a commission when you buy through our links.

Watch: We compared the $1,200 MacBook Air with the $500 Surface Go, and the results were a mess

• Main content

• PowerPoint Themes
• Latest PowerPoint Templates
• Best PowerPoint Templates
• Free PowerPoint Templates
• Simple PowerPoint Templates
• PowerPoint Backgrounds
• Project Charter
• Project Timeline
• Project Team
• Project Status
• Market Analysis
• Marketing Funnel
• Market Segmentation
• Target Customer
• Marketing Mix
• Digital Marketing Strategy
• Resource Planning
• Recruitment
• Employee Onboarding
• Company Profile
• Mission Vision
• Meet The Team
• Problem & Solution
• Business Model
• Business Case
• Business Strategy
• Business Review
• Leadership Team
• Balance Sheet
• Income Statement
• Cash Flow Statement
• Executive Summary
• 30 60 90 Day Plan
• SWOT Analysis
• Flow Charts
• Gantt Charts
• Text Tables
• Infographics
• Google Slides Templates
• Presentation Services
• Ask Us To Make Slides
• Data Visualization Services
• Business Presentation Tips
• PowerPoint Tutorials
• Google Slides Tutorials
• Presentation Resources

How To Loop A PowerPoint Slideshow? Detailed Guide

This Blog explains the methods to loop your presentation slideshows in detail. It covers all the techniques to create slideshow loops for PowerPoint as well as Google Slides presentations. We have also included tips to enhance your presentation slideshows.

Microsoft PowerPoint is a popular application for creating and delivering presentations. PowerPoint has numerous options for adding flair and taking your presentations a notch higher, such as the ability to incorporate YouTube videos, GIFs, etc. If you loop your PowerPoint, every slide will display for a predetermined duration. After the presentation, it will automatically resume from the beginning.

But the question is, can you use the looping function effectively? When used correctly, this feature eliminates the need for presenters to click a mouse or computer key to transition between slides. This feature is easy to set up and customize.

Today’s guide will teach us how to loop a PowerPoint slideshow and various tips and tricks for effective looping.

Why You Need to Loop Your Slideshow in PowerPoint?

Before learning how to loop a PowerPoint slideshow, let’s see under what scenarios one needs to loop their slideshow:

One helpful tool in PowerPoint that helps to guarantee a smooth and continuous presentation experience is the ability to loop your slideshow. The constant playback draws and maintains audience attention whether you present information in automated presentations, build interactive kiosks, or show information in exhibitions. Looping makes it possible to communicate information effectively and reinforce essential points for audience members who might join the presentation at different times. 

How to Make a PowerPoint Loop?

You can learn how to make a PowerPoint loop through the instructions below. You can use the loop for various events, such as trade exhibitions, information displays, or kiosks.

• Open the PowerPoint presentation that you wish to loop first.
• Go to the Slide Show Tab: The PowerPoint window has several tabs at the top. To access choices relating to presenting your slides, select the “Slide Show” tab.
• Access Setup Show: Several commands and choices are under the “Slide Show” tab. Search for the “Set Up Slide Show” button or menu item in the group labeled “Start Slide Show.” Click on it.
• Display Type: Select “Presented by a speaker (full screen).”
• Preview slides: If you want the slides to play automatically, select “Manually” or enter the desired duration for each slide’s PowerPoint presentation loop timing.
• Enable your presentation to loop indefinitely unless you manually end it by hitting the Escape (‘Esc’) key by enabling this option.
• Click OK: After adjusting these settings to store your options, click the “OK” button.
• Begin Your Loop: Your slides will be set to loop unless you manually stop it by pressing the ‘Esc’ key. To stop it, click “From Beginning” or “From Current Slide” under the “Slide Show” tab to begin your presentation.

How to Loop a PowerPoint SlideShow from Selected Slides

You can choose which slides you want to loop around in PowerPoint. Eliminating manual intervention and maintaining audience interaction can be achieved by carefully choosing which slides to show throughout the presentation. Follow these steps to learn how to loop a PowerPoint slideshow from selected slides: 

• Select the “Slide Show” option to start a loop for a particular set of slides. To initiate the loop, click the first slide in the thumbnail pane on the left.
• Click the final slide you wish to add to the loop while holding your keyboard’s “Shift” key. Next, select “Setup Show” and turn on the looping feature.
• Choose the “Custom Show” option and give it a name in the “Set Up Show” dialogue box. Navigate to the “Slide Show” menu and select “Custom Slide Show” to begin your looping presentation from the selected slides.

How to Set Up Auto-Loop for Continuous Playback

Now you know how to loop a slideshow in PowerPoint from selected slides, let us see how you can set up auto-loop for continuous playback: 

• Select the Slide Show tab.
• Press the Set Up Slide Show button. You’ll see an options window appear.
• Keep clicking Loop till you reach “Esc.”

Note: Under Show Type, select Presented by a speaker or Browsed by an individual if you want the speaker or individual to continue controlling the presentation and clicking between slides. Clicking “Browsed” at a kiosk checks the Loop until the “Esc” box appears continuously. Moreover, auto-looping may annoy your viewers if your presentation is very repetitive. Use it with discretion and only when it makes sense for your writing subject.

How to Loop A PowerPoint SlideShow Using 2007 Version (older versions).

Use these detailed instructions to loop your slides if you’re using an older version of Microsoft PowerPoint:

• Open your PowerPoint presentation on your 2007 Microsoft PowerPoint .
• Select the tab labeled Slide Show. Select the “Set Up Slide Show” option from the “Set Up” menu.
• Go to the “Show options” section and select “Loop continuously until ‘Esc'” from the dialogue box that appears. Click Ok.
• Select your initial slide from the “Slides” preview side panel. To select your final slide, press and hold Shift. 
• Select the tab labeled “Animations.” Turn off “On Mouse Click” and check the “Automatically After” box.
• The “After” box in the “Timing” panel has up and down arrows that you can use to change the time each slide appears. It will automatically loop back to the first slide when your slideshow reaches the last one.

How to Stop or Pause your Slideshow loop at any point.

Learning how to make a PowerPoint loop is of no use if you don’t know how to stop or pause your slideshow loop at any point: 

You can use simple keyboard commands to pause or stop your slideshow loop at any time during a PowerPoint presentation. You can manually stop the looping slideshow by hitting the “Esc” key (also known as the Escape key) on your keyboard. It gives presenters a simple and quick option to stop the continuous playback so they can answer queries, have conversations, or go to particular slides that are not playing continuously.

Advanced Techniques for Creating a Seamless Loop in PowerPoint

One of the techniques used for creating a seamless loop in PowerPoint is incorporating videos and GIFs. PowerPoint’s animations, transitions, and triggers can create seamless looping. Here is how:

• Select the video you imported and added to a slide.
• Open the “Animations” tab from the main menu.
• Choose “Play” from the animation gallery’s “Media” section after clicking the “ Add Animation ” button.
• On the right side of the screen, click the “Animation Pane” to open it.
• Right-click the “Play” button and choose “Timing” in the “Animation Pane.”
• Choose “Until End of Slide” or “Until Next Click” as the “Repeat” option in the “Timing” tab.
• Use Triggers to adjust the start and stop times of the video.

Tips and Tricks for Effective Slideshow Looping in PowerPoint

As you can see, creating a PowerPoint loop video couldn’t be easier. It only takes three easy steps to complete. Nonetheless, there are always specific tips you may apply to improve the appeal and attention-grabbingness of your videos.

1. Selecting the Right Video

The length and content of the video are the primary considerations when discussing the “right” video. Therefore, consider the duration of your video when creating a continuous loop.

Yes, longer videos can be more captivating, but they may add to the presentation’s file size and degrade performance. Shorter video clips, however, are less likely to affect performance and can loop more naturally. Regarding the video’s substance, make sure it supports the main idea of your presentation and is pertinent to the subject of your talk. The video aims to increase viewer comprehension and engagement without becoming overbearing or intrusive.

2. Compressing Video Files

Large videos can detract from the overall image of your presentation by making it excessively slow and challenging to share. Therefore, consider using a specialized video compression tool or the built-in PowerPoint compression feature to optimize your presentation by compressing the files. It doesn’t always imply that your presentation will look grainy. Still, it can cause a noticeable quality loss, so keep that in mind when creating the presentation in the first place.

3. Examining the Presentation

Make sure the video loops accurately and smoothly by testing it before you deliver your presentation. Go over the entire presentation, looking for any inconsistent or problematic playback. If you complete your testing on time, you can safely make all the required changes and retest it until the loop video functions as planned.

4. Looping Videos to Create Ambience and Background

You can also use videos that loop to set the mood for your presentation. For instance, a natural setting or a soft animation can produce an aesthetically pleasing and captivating ambiance. Nevertheless, the presentation’s general subject and the background clip are complementary rather than distracting.

To sum up, looping your PowerPoint slideshow is simple. PowerPoint’s “Set Up Slide Show options” allow you to program it to loop indefinitely for a predetermined number of times.

Use transitions carefully, arrange your slides in the correct order, and adhere to best practices while making your looping PowerPoint to give it a polished, professional appearance. Your looping slideshow can operate flawlessly at events without supervision with the correct settings.

How to Loop Slideshow In Powerpoint?

To loop a slideshow in PowerPoint, go to the “Slide Show” tab, select “Set Up Slide Show,” check “Loop continuously until ‘Esc’,” and click “OK.”

Can I loop specific slides within my PowerPoint presentation?

Yes, PowerPoint allows you to loop specific slides.

How do I stop or pause a looped slideshow in PowerPoint?

To interrupt a looped slideshow at any point, simply press the “Esc” key on your keyboard.

Can I customize the duration of each slide in a looped PowerPoint presentation?

Yes, you can control the timing of each slide by adjusting the slide transition settings, allowing for a tailored and dynamic looping experience.

Can SlideUpLift templates be used in looped presentations?

Yes, SlideUpLift provides PowerPoint templates that are compatible with looped presentations. These professionally designed templates can enhance the visual appeal of your slides, making your looped presentation more engaging and impactful.

Table Of Content

Related presentations.

Business Review PowerPoint Template

Business Case PowerPoint Deck Template

Project Status Review Deck Template

Related blogs.

10 Bad PowerPoint Slides Examples to Avoid

10 Best Animated PowerPoint Templates

10 Best Business PowerPoint Templates for Presentations

10 Best Free PowerPoint Templates

Tags and categories, privacy overview.

Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information

Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.

• Tech Deals at Target Right Now!
• The Electric Grill You Need This Year

Loop a PowerPoint Slide Show

• Brock University

What to Know

• In PowerPoint, go to Slide Show > Set Up Slide Show > Browsed at a Kiosk (Full Screen ) > OK .
• Set the time each slide appears on the screen by selecting Slide Show > Rehearse Timings on the first slide.
• Use Next to move to the next slide and Pause to pause recording, or type a length of time in the Slide Time box.

This article explains how to loop a PowerPoint slideshow in PowerPoint 2019, PowerPoint 2016, PowerPoint 2013, PowerPoint 2010, PowerPoint for Microsoft 365, PowerPoint 2019 for Mac, PowerPoint 2016 for Mac, and PowerPoint for Mac 2011.

How to Create a Self-Running PowerPoint Slideshow

PowerPoint slideshows are not always used by a live presenter. Slideshows set to loop continuously can run unattended in a booth or kiosk. You can even save a slideshow as a video to share.

To create a continuously looping presentation, you need to set it up and record slide timings.

To run the slideshow unattended, set timings for slide transitions and animations to run automatically.

How to Set Up the Presentation

Open the PowerPoint presentation you want to loop continuously.

Go to Slide Show .

Select Set Up Slide Show . The Set Up Show dialog box opens.

Select Browsed at a Kiosk (Full Screen) . This enables the presentation to loop continuously until the viewer presses Esc .

Select OK .

How to Rehearse and Record Timings

To ensure that your automated presentation is the right length, record timings to set the amount of time each slide appears on the screen.

PowerPoint for Mac does not have the rehearsal option. Instead, go to Transitions , choose the transition you want to use, set the duration you want, and select Apply to All .

Go to the first slide of the presentation.

Select Rehearse Timings . The slideshow starts and records the time spent on the slide. The time appears in the Slide Time box on the Recording toolbar.

Select Next on the Recording toolbar when you want to move to the next slide.

Select Pause any time you want to pause or resume recording.

Type a length of time in the Slide Time box if you want to display a slide for a specific amount of time.

Select Repeat if you want to restart the recording time for the current slide only.

Select Close when you're done recording.

You'll be asked if you want to save the new slide timings. Select Yes to save the slide timings at the end of the presentation.

If you have a microphone (built-in or external), record a voiceover on your PowerPoint presentation that plays as the slideshow loops continuously.

Get the Latest Tech News Delivered Every Day

• How to Make a Slideshow on PowerPoint
• Add Hyperlinks to PowerPoint Presentations
• Tips for Memorial PowerPoint Presentations
• Create a Wedding PowerPoint Presentation
• How to Do a Voiceover on PowerPoint
• How to Add Music to PowerPoint
• Adding Sounds, Music or Narration to PowerPoint Slide Shows
• How to Use Speaker Notes in PowerPoint
• How to Add Audio to PowerPoint
• Different Ways to View Slides in PowerPoint
• Resuming Your PowerPoint Show After a Pause
• Use Keyboard Shortcuts to Speed up PowerPoint Presentations
• How to Change a Black-and-White Picture to Color in PowerPoint
• Add, Delete or Change the Order of PowerPoint Slides
• Make the Most of PowerPoint's Slide Transition Options
• How to Print PowerPoint Slides