what is variable assignment statement

1.4 — Variable assignment and initialization

In the previous lesson ( 1.3 -- Introduction to objects and variables ), we covered how to define a variable that we can use to store values. In this lesson, we’ll explore how to actually put values into variables and use those values.

As a reminder, here’s a short snippet that first allocates a single integer variable named x , then allocates two more integer variables named y and z :

Variable assignment

After a variable has been defined, you can give it a value (in a separate statement) using the = operator . This process is called assignment , and the = operator is called the assignment operator .

By default, assignment copies the value on the right-hand side of the = operator to the variable on the left-hand side of the operator. This is called copy assignment .

Here’s an example where we use assignment twice:

This prints:

When we assign value 7 to variable width , the value 5 that was there previously is overwritten. Normal variables can only hold one value at a time.

One of the most common mistakes that new programmers make is to confuse the assignment operator ( = ) with the equality operator ( == ). Assignment ( = ) is used to assign a value to a variable. Equality ( == ) is used to test whether two operands are equal in value.

Initialization

One downside of assignment is that it requires at least two statements: one to define the variable, and another to assign the value.

These two steps can be combined. When an object is defined, you can optionally give it an initial value. The process of specifying an initial value for an object is called initialization , and the syntax used to initialize an object is called an initializer .

In the above initialization of variable width , { 5 } is the initializer, and 5 is the initial value.

Different forms of initialization

Initialization in C++ is surprisingly complex, so we’ll present a simplified view here.

There are 6 basic ways to initialize variables in C++:

You may see the above forms written with different spacing (e.g. int d{7}; ). Whether you use extra spaces for readability or not is a matter of personal preference.

Default initialization

When no initializer is provided (such as for variable a above), this is called default initialization . In most cases, default initialization performs no initialization, and leaves a variable with an indeterminate value.

We’ll discuss this case further in lesson ( 1.6 -- Uninitialized variables and undefined behavior ).

Copy initialization

When an initial value is provided after an equals sign, this is called copy initialization . This form of initialization was inherited from C.

Much like copy assignment, this copies the value on the right-hand side of the equals into the variable being created on the left-hand side. In the above snippet, variable width will be initialized with value 5 .

Copy initialization had fallen out of favor in modern C++ due to being less efficient than other forms of initialization for some complex types. However, C++17 remedied the bulk of these issues, and copy initialization is now finding new advocates. You will also find it used in older code (especially code ported from C), or by developers who simply think it looks more natural and is easier to read.

For advanced readers

Copy initialization is also used whenever values are implicitly copied or converted, such as when passing arguments to a function by value, returning from a function by value, or catching exceptions by value.

Direct initialization

When an initial value is provided inside parenthesis, this is called direct initialization .

Direct initialization was initially introduced to allow for more efficient initialization of complex objects (those with class types, which we’ll cover in a future chapter). Just like copy initialization, direct initialization had fallen out of favor in modern C++, largely due to being superseded by list initialization. However, we now know that list initialization has a few quirks of its own, and so direct initialization is once again finding use in certain cases.

Direct initialization is also used when values are explicitly cast to another type.

One of the reasons direct initialization had fallen out of favor is because it makes it hard to differentiate variables from functions. For example:

List initialization

The modern way to initialize objects in C++ is to use a form of initialization that makes use of curly braces. This is called list initialization (or uniform initialization or brace initialization ).

List initialization comes in three forms:

As an aside…

Prior to the introduction of list initialization, some types of initialization required using copy initialization, and other types of initialization required using direct initialization. List initialization was introduced to provide a more consistent initialization syntax (which is why it is sometimes called “uniform initialization”) that works in most cases.

Additionally, list initialization provides a way to initialize objects with a list of values (which is why it is called “list initialization”). We show an example of this in lesson 16.2 -- Introduction to std::vector and list constructors .

List initialization has an added benefit: “narrowing conversions” in list initialization are ill-formed. This means that if you try to brace initialize a variable using a value that the variable can not safely hold, the compiler is required to produce a diagnostic (usually an error). For example:

In the above snippet, we’re trying to assign a number (4.5) that has a fractional part (the .5 part) to an integer variable (which can only hold numbers without fractional parts).

Copy and direct initialization would simply drop the fractional part, resulting in the initialization of value 4 into variable width . Your compiler may optionally warn you about this, since losing data is rarely desired. However, with list initialization, your compiler is required to generate a diagnostic in such cases.

Conversions that can be done without potential data loss are allowed.

To summarize, list initialization is generally preferred over the other initialization forms because it works in most cases (and is therefore most consistent), it disallows narrowing conversions, and it supports initialization with lists of values (something we’ll cover in a future lesson). While you are learning, we recommend sticking with list initialization (or value initialization).

Best practice

Prefer direct list initialization (or value initialization) for initializing your variables.

Author’s note

Bjarne Stroustrup (creator of C++) and Herb Sutter (C++ expert) also recommend using list initialization to initialize your variables.

In modern C++, there are some cases where list initialization does not work as expected. We cover one such case in lesson 16.2 -- Introduction to std::vector and list constructors .

Because of such quirks, some experienced developers now advocate for using a mix of copy, direct, and list initialization, depending on the circumstance. Once you are familiar enough with the language to understand the nuances of each initialization type and the reasoning behind such recommendations, you can evaluate on your own whether you find these arguments persuasive.

Value initialization and zero initialization

When a variable is initialized using empty braces, value initialization takes place. In most cases, value initialization will initialize the variable to zero (or empty, if that’s more appropriate for a given type). In such cases where zeroing occurs, this is called zero initialization .

Q: When should I initialize with { 0 } vs {}?

Use an explicit initialization value if you’re actually using that value.

Use value initialization if the value is temporary and will be replaced.

Initialize your variables

Initialize your variables upon creation. You may eventually find cases where you want to ignore this advice for a specific reason (e.g. a performance critical section of code that uses a lot of variables), and that’s okay, as long as the choice is made deliberately.

AP®︎/College Computer Science Principles

Course: ap®︎/college computer science principles > unit 3, storing data in variables, assigning variables, displaying variables, re-assigning variables, pseudocode for variables.

(Choice A) x ← 200 A x ← 200
(Choice B) var x = 200 B var x = 200
(Choice C) x = 200 C x = 200
(Choice D) var x ← 200 D var x ← 200

Want to join the conversation?

Upvote Button navigates to signup page
Downvote Button navigates to signup page
Flag Button navigates to signup page

Python Numerical Methods

This notebook contains an excerpt from the Python Programming and Numerical Methods - A Guide for Engineers and Scientists , the content is also available at Berkeley Python Numerical Methods .

The copyright of the book belongs to Elsevier. We also have this interactive book online for a better learning experience. The code is released under the MIT license . If you find this content useful, please consider supporting the work on Elsevier or Amazon !

< 2.0 Variables and Basic Data Structures | Contents | 2.2 Data Structure - Strings >

Variables and Assignment ¶

When programming, it is useful to be able to store information in variables. A variable is a string of characters and numbers associated with a piece of information. The assignment operator , denoted by the “=” symbol, is the operator that is used to assign values to variables in Python. The line x=1 takes the known value, 1, and assigns that value to the variable with name “x”. After executing this line, this number will be stored into this variable. Until the value is changed or the variable deleted, the character x behaves like the value 1.

TRY IT! Assign the value 2 to the variable y. Multiply y by 3 to show that it behaves like the value 2.

A variable is more like a container to store the data in the computer’s memory, the name of the variable tells the computer where to find this value in the memory. For now, it is sufficient to know that the notebook has its own memory space to store all the variables in the notebook. As a result of the previous example, you will see the variable “x” and “y” in the memory. You can view a list of all the variables in the notebook using the magic command %whos .

TRY IT! List all the variables in this notebook

Note that the equal sign in programming is not the same as a truth statement in mathematics. In math, the statement x = 2 declares the universal truth within the given framework, x is 2 . In programming, the statement x=2 means a known value is being associated with a variable name, store 2 in x. Although it is perfectly valid to say 1 = x in mathematics, assignments in Python always go left : meaning the value to the right of the equal sign is assigned to the variable on the left of the equal sign. Therefore, 1=x will generate an error in Python. The assignment operator is always last in the order of operations relative to mathematical, logical, and comparison operators.

TRY IT! The mathematical statement x=x+1 has no solution for any value of x . In programming, if we initialize the value of x to be 1, then the statement makes perfect sense. It means, “Add x and 1, which is 2, then assign that value to the variable x”. Note that this operation overwrites the previous value stored in x .

There are some restrictions on the names variables can take. Variables can only contain alphanumeric characters (letters and numbers) as well as underscores. However, the first character of a variable name must be a letter or underscores. Spaces within a variable name are not permitted, and the variable names are case-sensitive (e.g., x and X will be considered different variables).

TIP! Unlike in pure mathematics, variables in programming almost always represent something tangible. It may be the distance between two points in space or the number of rabbits in a population. Therefore, as your code becomes increasingly complicated, it is very important that your variables carry a name that can easily be associated with what they represent. For example, the distance between two points in space is better represented by the variable dist than x , and the number of rabbits in a population is better represented by nRabbits than y .

Note that when a variable is assigned, it has no memory of how it was assigned. That is, if the value of a variable, y , is constructed from other variables, like x , reassigning the value of x will not change the value of y .

EXAMPLE: What value will y have after the following lines of code are executed?

WARNING! You can overwrite variables or functions that have been stored in Python. For example, the command help = 2 will store the value 2 in the variable with name help . After this assignment help will behave like the value 2 instead of the function help . Therefore, you should always be careful not to give your variables the same name as built-in functions or values.

TIP! Now that you know how to assign variables, it is important that you learn to never leave unassigned commands. An unassigned command is an operation that has a result, but that result is not assigned to a variable. For example, you should never use 2+2 . You should instead assign it to some variable x=2+2 . This allows you to “hold on” to the results of previous commands and will make your interaction with Python must less confusing.

You can clear a variable from the notebook using the del function. Typing del x will clear the variable x from the workspace. If you want to remove all the variables in the notebook, you can use the magic command %reset .

In mathematics, variables are usually associated with unknown numbers; in programming, variables are associated with a value of a certain type. There are many data types that can be assigned to variables. A data type is a classification of the type of information that is being stored in a variable. The basic data types that you will utilize throughout this book are boolean, int, float, string, list, tuple, dictionary, set. A formal description of these data types is given in the following sections.

Learning Python by doing

suggest edit

Variables, Expressions, and Assignments

Variables, expressions, and assignments 1 #, introduction #.

In this chapter, we introduce some of the main building blocks needed to create programs–that is, variables, expressions, and assignments. Programming related variables can be intepret in the same way that we interpret mathematical variables, as elements that store values that can later be changed. Usually, variables and values are used within the so-called expressions. Once again, just as in mathematics, an expression is a construct of values and variables connected with operators that result in a new value. Lastly, an assignment is a language construct know as an statement that assign a value (either as a constant or expression) to a variable. The rest of this notebook will dive into the main concepts that we need to fully understand these three language constructs.

Values and Types #

A value is the basic unit used in a program. It may be, for instance, a number respresenting temperature. It may be a string representing a word. Some values are 42, 42.0, and ‘Hello, Data Scientists!’.

Each value has its own type : 42 is an integer ( int in Python), 42.0 is a floating-point number ( float in Python), and ‘Hello, Data Scientists!’ is a string ( str in Python).

The Python interpreter can tell you the type of a value: the function type takes a value as argument and returns its corresponding type.

Observe the difference between type(42) and type('42') !

Expressions and Statements #

On the one hand, an expression is a combination of values, variables, and operators.

A value all by itself is considered an expression, and so is a variable.

When you type an expression at the prompt, the interpreter evaluates it, which means that it calculates the value of the expression and displays it.

In boxes above, m has the value 27 and m + 25 has the value 52 . m + 25 is said to be an expression.

On the other hand, a statement is an instruction that has an effect, like creating a variable or displaying a value.

The first statement initializes the variable n with the value 17 , this is a so-called assignment statement .

The second statement is a print statement that prints the value of the variable n .

The effect is not always visible. Assigning a value to a variable is not visible, but printing the value of a variable is.

Assignment Statements #

We have already seen that Python allows you to evaluate expressions, for instance 40 + 2 . It is very convenient if we are able to store the calculated value in some variable for future use. The latter can be done via an assignment statement. An assignment statement creates a new variable with a given name and assigns it a value.

The example in the previous code contains three assignments. The first one assigns the value of the expression 40 + 2 to a new variable called magicnumber ; the second one assigns the value of π to the variable pi , and; the last assignment assigns the string value 'Data is eatig the world' to the variable message .

Programmers generally choose names for their variables that are meaningful. In this way, they document what the variable is used for.

Do It Yourself!

Let’s compute the volume of a cube with side $s = 5$ . Remember that the volume of a cube is defined as $v = s^3$ . Assign the value to a variable called volume .

Well done! Now, why don’t you print the result in a message? It can say something like “The volume of the cube with side 5 is $volume$ ”.

Beware that there is no checking of types ( type checking ) in Python, so a variable to which you have assigned an integer may be re-used as a float, even if we provide type-hints .

Names and Keywords #

Names of variable and other language constructs such as functions (we will cover this topic later), should be meaningful and reflect the purpose of the construct.

In general, Python names should adhere to the following rules:

It should start with a letter or underscore.

It cannot start with a number.

It must only contain alpha-numeric (i.e., letters a-z A-Z and digits 0-9) characters and underscores.

They cannot share the name of a Python keyword.

If you use illegal variable names you will get a syntax error.

By choosing the right variables names you make the code self-documenting, what is better the variable v or velocity ?

The following are examples of invalid variable names.

These basic development principles are sometimes called architectural rules . By defining and agreeing upon architectural rules you make it easier for you and your fellow developers to understand and modify your code.

If you want to read more on this, please have a look at Code complete a book by Steven McConnell [ McC04 ] .

Every programming language has a collection of reserved keywords . They are used in predefined language constructs, such as loops and conditionals . These language concepts and their usage will be explained later.

The interpreter uses keywords to recognize these language constructs in a program. Python 3 has the following keywords:

False class finally is return

None continue for lambda try

True def from nonlocal while

and del global not with

as elif if or yield

assert else import pass break

except in raise

Reassignments #

It is allowed to assign a new value to an existing variable. This process is called reassignment . As soon as you assign a value to a variable, the old value is lost.

The assignment of a variable to another variable, for instance b = a does not imply that if a is reassigned then b changes as well.

You have a variable salary that shows the weekly salary of an employee. However, you want to compute the monthly salary. Can you reassign the value to the salary variable according to the instruction?

Updating Variables #

A frequently used reassignment is for updating puposes: the value of a variable depends on the previous value of the variable.

This statement expresses “get the current value of x , add one, and then update x with the new value.”

Beware, that the variable should be initialized first, usually with a simple assignment.

Do you remember the salary excercise of the previous section (cf. 13. Reassignments)? Well, if you have not done it yet, update the salary variable by using its previous value.

Updating a variable by adding 1 is called an increment ; subtracting 1 is called a decrement . A shorthand way of doing is using += and -= , which stands for x = x + ... and x = x - ... respectively.

Order of Operations #

Expressions may contain multiple operators. The order of evaluation depends on the priorities of the operators also known as rules of precedence .

For mathematical operators, Python follows mathematical convention. The acronym PEMDAS is a useful way to remember the rules:

Parentheses have the highest precedence and can be used to force an expression to evaluate in the order you want. Since expressions in parentheses are evaluated first, 2 * (3 - 1) is 4 , and (1 + 1)**(5 - 2) is 8 . You can also use parentheses to make an expression easier to read, even if it does not change the result.

Exponentiation has the next highest precedence, so 1 + 2**3 is 9 , not 27 , and 2 * 3**2 is 18 , not 36 .

Multiplication and division have higher precedence than addition and subtraction . So 2 * 3 - 1 is 5 , not 4 , and 6 + 4 / 2 is 8 , not 5 .

Operators with the same precedence are evaluated from left to right (except exponentiation). So in the expression degrees / 2 * pi , the division happens first and the result is multiplied by pi . To divide by 2π, you can use parentheses or write: degrees / 2 / pi .

In case of doubt, use parentheses!

Let’s see what happens when we evaluate the following expressions. Just run the cell to check the resulting value.

Floor Division and Modulus Operators #

The floor division operator // divides two numbers and rounds down to an integer.

For example, suppose that driving to the south of France takes 555 minutes. You might want to know how long that is in hours.

Conventional division returns a floating-point number.

Hours are normally not represented with decimal points. Floor division returns the integer number of hours, dropping the fraction part.

You spend around 225 minutes every week on programming activities. You want to know around how many hours you invest to this activity during a month. Use the $//$ operator to give the answer.

The modulus operator % works on integer values. It computes the remainder when dividing the first integer by the second one.

The modulus operator is more useful than it seems.

For example, you can check whether one number is divisible by another—if x % y is zero, then x is divisible by y .

String Operations #

In general, you cannot perform mathematical operations on strings, even if the strings look like numbers, so the following operations are illegal: '2'-'1' 'eggs'/'easy' 'third'*'a charm'

But there are two exceptions, + and * .

The + operator performs string concatenation, which means it joins the strings by linking them end-to-end.

The * operator also works on strings; it performs repetition.

Speedy Gonzales is a cartoon known to be the fastest mouse in all Mexico . He is also famous for saying “Arriba Arriba Andale Arriba Arriba Yepa”. Can you use the following variables, namely arriba , andale and yepa to print the mentioned expression? Don’t forget to use the string operators.

Asking the User for Input #

The programs we have written so far accept no input from the user.

To get data from the user through the Python prompt, we can use the built-in function input .

When input is called your whole program stops and waits for the user to enter the required data. Once the user types the value and presses Return or Enter , the function returns the input value as a string and the program continues with its execution.

Try it out!

You can also print a message to clarify the purpose of the required input as follows.

The resulting string can later be translated to a different type, like an integer or a float. To do so, you use the functions int and float , respectively. But be careful, the user might introduce a value that cannot be converted to the type you required.

We want to know the name of a user so we can display a welcome message in our program. The message should say something like “Hello $name$ , welcome to our hello world program!”.

Script Mode #

So far we have run Python in interactive mode in these Jupyter notebooks, which means that you interact directly with the interpreter in the code cells . The interactive mode is a good way to get started, but if you are working with more than a few lines of code, it can be clumsy. The alternative is to save code in a file called a script and then run the interpreter in script mode to execute the script. By convention, Python scripts have names that end with .py .

Use the PyCharm icon in Anaconda Navigator to create and execute stand-alone Python scripts. Later in the course, you will have to work with Python projects for the assignments, in order to get acquainted with another way of interacing with Python code.

This Jupyter Notebook is based on Chapter 2 of the books Python for Everybody [ Sev16 ] and Think Python (Sections 5.1, 7.1, 7.2, and 5.12) [ Dow15 ] .

Hands-on Python Tutorial »
1. Beginning With Python »

1.6. Variables and Assignment ¶

Each set-off line in this section should be tried in the Shell.

Nothing is displayed by the interpreter after this entry, so it is not clear anything happened. Something has happened. This is an assignment statement , with a variable , width , on the left. A variable is a name for a value. An assignment statement associates a variable name on the left of the equal sign with the value of an expression calculated from the right of the equal sign. Enter

Once a variable is assigned a value, the variable can be used in place of that value. The response to the expression width is the same as if its value had been entered.

The interpreter does not print a value after an assignment statement because the value of the expression on the right is not lost. It can be recovered if you like, by entering the variable name and we did above.

Try each of the following lines:

The equal sign is an unfortunate choice of symbol for assignment, since Python’s usage is not the mathematical usage of the equal sign. If the symbol ↤ had appeared on keyboards in the early 1990’s, it would probably have been used for assignment instead of =, emphasizing the asymmetry of assignment. In mathematics an equation is an assertion that both sides of the equal sign are already, in fact, equal . A Python assignment statement forces the variable on the left hand side to become associated with the value of the expression on the right side. The difference from the mathematical usage can be illustrated. Try:

so this is not equivalent in Python to width = 10 . The left hand side must be a variable, to which the assignment is made. Reversed, we get a syntax error . Try

This is, of course, nonsensical as mathematics, but it makes perfectly good sense as an assignment, with the right-hand side calculated first. Can you figure out the value that is now associated with width? Check by entering

In the assignment statement, the expression on the right is evaluated first . At that point width was associated with its original value 10, so width + 5 had the value of 10 + 5 which is 15. That value was then assigned to the variable on the left ( width again) to give it a new value. We will modify the value of variables in a similar way routinely.

Assignment and variables work equally well with strings. Try:

Try entering:

Note the different form of the error message. The earlier errors in these tutorials were syntax errors: errors in translation of the instruction. In this last case the syntax was legal, so the interpreter went on to execute the instruction. Only then did it find the error described. There are no quotes around fred , so the interpreter assumed fred was an identifier, but the name fred was not defined at the time the line was executed.

It is both easy to forget quotes where you need them for a literal string and to mistakenly put them around a variable name that should not have them!

Try in the Shell :

There fred , without the quotes, makes sense.

There are more subtleties to assignment and the idea of a variable being a “name for” a value, but we will worry about them later, in Issues with Mutable Objects . They do not come up if our variables are just numbers and strings.

Autocompletion: A handy short cut. Idle remembers all the variables you have defined at any moment. This is handy when editing. Without pressing Enter, type into the Shell just

Assuming you are following on the earlier variable entries to the Shell, you should see f autocompleted to be

This is particularly useful if you have long identifiers! You can press Alt-/ several times if more than one identifier starts with the initial sequence of characters you typed. If you press Alt-/ again you should see fred . Backspace and edit so you have fi , and then and press Alt-/ again. You should not see fred this time, since it does not start with fi .

1.6.1. Literals and Identifiers ¶

Expressions like 27 or 'hello' are called literals , coming from the fact that they literally mean exactly what they say. They are distinguished from variables, whose value is not directly determined by their name.

The sequence of characters used to form a variable name (and names for other Python entities later) is called an identifier . It identifies a Python variable or other entity.

There are some restrictions on the character sequence that make up an identifier:

The characters must all be letters, digits, or underscores _ , and must start with a letter. In particular, punctuation and blanks are not allowed.

There are some words that are reserved for special use in Python. You may not use these words as your own identifiers. They are easy to recognize in Idle, because they are automatically colored orange. For the curious, you may read the full list:

There are also identifiers that are automatically defined in Python, and that you could redefine, but you probably should not unless you really know what you are doing! When you start the editor, we will see how Idle uses color to help you know what identifies are predefined.

Python is case sensitive: The identifiers last , LAST , and LaSt are all different. Be sure to be consistent. Using the Alt-/ auto-completion shortcut in Idle helps ensure you are consistent.

What is legal is distinct from what is conventional or good practice or recommended. Meaningful names for variables are important for the humans who are looking at programs, understanding them, and revising them. That sometimes means you would like to use a name that is more than one word long, like price at opening , but blanks are illegal! One poor option is just leaving out the blanks, like priceatopening . Then it may be hard to figure out where words split. Two practical options are

underscore separated: putting underscores (which are legal) in place of the blanks, like price_at_opening .
using camel-case : omitting spaces and using all lowercase, except capitalizing all words after the first, like priceAtOpening

Use the choice that fits your taste (or the taste or convention of the people you are working with).

1.6.1. Literals and Identifiers

Previous topic

1.5. Strings, Part I

1.7. Print Function, Part I

Show Source

Quick search

Enter search terms or a module, class or function name.

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

Kenneth Leroy Busbee

An assignment statement sets and/or re-sets the value stored in the storage location(s) denoted by a variable name; in other words, it copies a value into the variable. [1]

The assignment operator allows us to change the value of a modifiable data object (for beginning programmers this typically means a variable). It is associated with the concept of moving a value into the storage location (again usually a variable). Within most programming languages the symbol used for assignment is the equal symbol. But bite your tongue, when you see the = symbol you need to start thinking: assignment. The assignment operator has two operands. The one to the left of the operator is usually an identifier name for a variable. The one to the right of the operator is a value.

Simple Assignment

The value 21 is moved to the memory location for the variable named: age. Another way to say it: age is assigned the value 21.

Assignment with an Expression

The item to the right of the assignment operator is an expression. The expression will be evaluated and the answer is 14. The value 14 would be assigned to the variable named: total_cousins.

Assignment with Identifier Names in the Expression

The expression to the right of the assignment operator contains some identifier names. The program would fetch the values stored in those variables; add them together and get a value of 44; then assign the 44 to the total_students variable.

cnx.org: Programming Fundamentals – A Modular Structured Approach using C++
Wikipedia: Assignment (computer science) ↵

Share This Book

Module 2: The Essentials of Python »
Variables & Assignment
View page source

Variables & Assignment 

There are reading-comprehension exercises included throughout the text. These are meant to help you put your reading to practice. Solutions for the exercises are included at the bottom of this page.

Variables permit us to write code that is flexible and amendable to repurpose. Suppose we want to write code that logs a student’s grade on an exam. The logic behind this process should not depend on whether we are logging Brian’s score of 92% versus Ashley’s score of 94%. As such, we can utilize variables, say name and grade , to serve as placeholders for this information. In this subsection, we will demonstrate how to define variables in Python.

In Python, the = symbol represents the “assignment” operator. The variable goes to the left of = , and the object that is being assigned to the variable goes to the right:

Attempting to reverse the assignment order (e.g. 92 = name ) will result in a syntax error. When a variable is assigned an object (like a number or a string), it is common to say that the variable is a reference to that object. For example, the variable name references the string "Brian" . This means that, once a variable is assigned an object, it can be used elsewhere in your code as a reference to (or placeholder for) that object:

Valid Names for Variables 

A variable name may consist of alphanumeric characters ( a-z , A-Z , 0-9 ) and the underscore symbol ( _ ); a valid name cannot begin with a numerical value.

var : valid

_var2 : valid

ApplePie_Yum_Yum : valid

2cool : invalid (begins with a numerical character)

I.am.the.best : invalid (contains . )

They also cannot conflict with character sequences that are reserved by the Python language. As such, the following cannot be used as variable names:

for , while , break , pass , continue

in , is , not

if , else , elif

def , class , return , yield , raises

import , from , as , with

try , except , finally

There are other unicode characters that are permitted as valid characters in a Python variable name, but it is not worthwhile to delve into those details here.

Mutable and Immutable Objects 

The mutability of an object refers to its ability to have its state changed. A mutable object can have its state changed, whereas an immutable object cannot. For instance, a list is an example of a mutable object. Once formed, we are able to update the contents of a list - replacing, adding to, and removing its elements.

To spell out what is transpiring here, we:

Create (initialize) a list with the state [1, 2, 3] .

Assign this list to the variable x ; x is now a reference to that list.

Using our referencing variable, x , update element-0 of the list to store the integer -4 .

This does not create a new list object, rather it mutates our original list. This is why printing x in the console displays [-4, 2, 3] and not [1, 2, 3] .

A tuple is an example of an immutable object. Once formed, there is no mechanism by which one can change of the state of a tuple; and any code that appears to be updating a tuple is in fact creating an entirely new tuple.

Mutable & Immutable Types of Objects 

The following are some common immutable and mutable objects in Python. These will be important to have in mind as we start to work with dictionaries and sets.

Some immutable objects

numbers (integers, floating-point numbers, complex numbers)

“frozen”-sets

Some mutable objects

dictionaries

NumPy arrays

Referencing a Mutable Object with Multiple Variables 

It is possible to assign variables to other, existing variables. Doing so will cause the variables to reference the same object:

What this entails is that these common variables will reference the same instance of the list. Meaning that if the list changes, all of the variables referencing that list will reflect this change:

We can see that list2 is still assigned to reference the same, updated list as list1 :

In general, assigning a variable b to a variable a will cause the variables to reference the same object in the system’s memory, and assigning c to a or b will simply have a third variable reference this same object. Then any change (a.k.a mutation ) of the object will be reflected in all of the variables that reference it ( a , b , and c ).

Of course, assigning two variables to identical but distinct lists means that a change to one list will not affect the other:

Reading Comprehension: Does slicing a list produce a reference to that list?

Suppose x is assigned a list, and that y is assigned a “slice” of x . Do x and y reference the same list? That is, if you update part of the subsequence common to x and y , does that change show up in both of them? Write some simple code to investigate this.

Reading Comprehension: Understanding References

Based on our discussion of mutable and immutable objects, predict what the value of y will be in the following circumstance:

Reading Comprehension Exercise Solutions: 

Does slicing a list produce a reference to that list?: Solution

Based on the following behavior, we can conclude that slicing a list does not produce a reference to the original list. Rather, slicing a list produces a copy of the appropriate subsequence of the list:

Understanding References: Solutions

Integers are immutable, thus x must reference an entirely new object ( 9 ), and y still references 3 .

CS101: Introduction to Computer Science I

Variables and Assignment Statements

Read this chapter, which covers variables and arithmetic operations and order precedence in Java.

9. Assignment Statements

No. The incorrect splittings are highlighted in red:

Assignment Statement

So far, the example programs have been using the value initially put into a variable. Programs can change the value in a variable. An assignment statement changes the value that is held in a variable. The program uses an assignment statement.

The assignment statement puts the value 123 into the variable. In other words, while the program is executing there will be a 64 bit section of memory that holds the value 123.

Remember that the word "execute" is often used to mean "run". You speak of "executing a program" or "executing" a line of the program.

Question 10:

Assignment Statement

An Assignment statement is a statement that is used to set a value to the variable name in a program .

Assignment statement allows a variable to hold different types of values during its program lifespan. Another way of understanding an assignment statement is, it stores a value in the memory location which is denoted by a variable name.

The symbol used in an assignment statement is called as an operator . The symbol is ‘=’ .

Note: The Assignment Operator should never be used for Equality purpose which is double equal sign ‘==’.

The Basic Syntax of Assignment Statement in a programming language is :

variable = expression ;

variable = variable name

expression = it could be either a direct value or a math expression/formula or a function call

Few programming languages such as Java, C, C++ require data type to be specified for the variable, so that it is easy to allocate memory space and store those values during program execution.

data_type variable_name = value ;

In the above-given examples, Variable ‘a’ is assigned a value in the same statement as per its defined data type. A data type is only declared for Variable ‘b’. In the 3 rd line of code, Variable ‘a’ is reassigned the value 25. The 4 th line of code assigns the value for Variable ‘b’.

Assignment Statement Forms

This is one of the most common forms of Assignment Statements. Here the Variable name is defined, initialized, and assigned a value in the same statement. This form is generally used when we want to use the Variable quite a few times and we do not want to change its value very frequently.

Tuple Assignment

Generally, we use this form when we want to define and assign values for more than 1 variable at the same time. This saves time and is an easy method. Note that here every individual variable has a different value assigned to it.

(Code In Python)

Sequence Assignment

(Code in Python)

Multiple-target Assignment or Chain Assignment

In this format, a single value is assigned to two or more variables.

Augmented Assignment

In this format, we use the combination of mathematical expressions and values for the Variable. Other augmented Assignment forms are: &=, -=, **=, etc.

Browse more Topics Under Data Types, Variables and Constants

Concept of Data types
Built-in Data Types
Constants in Programing Language
Access Modifier
Variables of Built-in-Datatypes
Declaration/Initialization of Variables
Type Modifier

Few Rules for Assignment Statement

Few Rules to be followed while writing the Assignment Statements are:

Variable names must begin with a letter, underscore, non-number character. Each language has its own conventions.
The Data type defined and the variable value must match.
A variable name once defined can only be used once in the program. You cannot define it again to store other types of value.
If you assign a new value to an existing variable, it will overwrite the previous value and assign the new value.

FAQs on Assignment Statement

Q1. Which of the following shows the syntax of an assignment statement ?

variablename = expression ;
expression = variable ;
datatype = variablename ;
expression = datatype variable ;

Answer – Option A.

Q2. What is an expression ?

Same as statement
List of statements that make up a program
Combination of literals, operators, variables, math formulas used to calculate a value
Numbers expressed in digits

Answer – Option C.

Q3. What are the two steps that take place when an assignment statement is executed?

Evaluate the expression, store the value in the variable
Reserve memory, fill it with value
Evaluate variable, store the result
Store the value in the variable, evaluate the expression.

Customize your course in 30 seconds

Which class are you in.

Data Types, Variables and Constants

Variables in Programming Language
Concept of Data Types
Declaration of Variables
Type Modifiers
Access Modifiers
Constants in Programming Language

Download the App

Assignment Statements

The last thing we discussed in the previous unit were variables. We use variables to store values of an evaluated expression. To store this value, we use an assignment statement . A simple assignment statement consists of a variable name, an equal sign ( assignment operator ) and the value to be stored.

a in the above expression is assigned the value 7.

Here we see that the variable a has 2 added to it's previous value. The resulting number is 9, the addition of 7 and 2.

To break it down into easy steps:

a = 7 -> Variable is initialized when we store a value in it
a = a + 2 -> Variable is assigned a new value and forgets the old value

This is called overwriting the variable. a 's value was overwritten in the process. The expression on the right of the = operator is evaluated down to a single value before it is assigned to the variable on the left. During the evaluation stage, a still carries the number 7 , this is added by 2 which results in 9 . 9 is then assigned to the variable a and overwrites the previous value.

Another example:

Hence, when a new value is assigned to a variable, the old one is forgotten.

Variable Names

There are three rules for variable names:

It can be only one word, no spaces are allowed.
It can use only letters, numbers, and the underscore (_) character.
It can’t begin with a number.

Note: Variable names are case-sensitive. This means that hello, Hello, hellO are three different variables. The python convention is to start a variable name with lowercase characters. Tip: A good variable name describes the data it contains. Imagine you have a cat namely Kitty. You could say cat = 'Kitty' .

What would this output: 'name' + 'namename' ? a. 'name' b. 'namenamename' c. 'namename' d. namenamename

What would this output: 'name' * 3 a. 'name' b. 'namenamename' c. 'namename' d. namenamename

results matching " "

No results matching " ".

Table of Contents
Course Home
Assignments
Peer Instruction (Instructor)
Peer Instruction (Student)
Change Course
Instructor's Page
Progress Page
Edit Profile
Change Password
Scratch ActiveCode
Scratch Activecode
Instructors Guide
About Runestone
Report A Problem
1.1 Getting Started
1.1.1 Preface
1.1.2 About the AP CSA Exam
1.1.3 Transitioning from AP CSP to AP CSA
1.1.4 Java Development Environments
1.1.5 Growth Mindset and Pair Programming
1.1.6 Pretest for the AP CSA Exam
1.1.7 Survey
1.2 Why Programming? Why Java?
1.3 Variables and Data Types
1.4 Expressions and Assignment Statements
1.5 Compound Assignment Operators
1.6 Casting and Ranges of Values
1.7 Unit 1 Summary
1.8 Mixed Up Code Practice
1.9 Toggle Mixed Up or Write Code Practice
1.10 Coding Practice
1.11 Multiple Choice Exercises
1.3. Variables and Data Types" data-toggle="tooltip">
1.5. Compound Assignment Operators' data-toggle="tooltip" >

Before you keep reading...

Runestone Academy can only continue if we get support from individuals like you. As a student you are well aware of the high cost of textbooks. Our mission is to provide great books to you for free, but we ask that you consider a $10 donation, more if you can or less if $10 is a burden.

Making great stuff takes time and $$. If you appreciate the book you are reading now and want to keep quality materials free for other students please consider a donation to Runestone Academy. We ask that you consider a $10 donation, but if you can give more thats great, if $10 is too much for your budget we would be happy with whatever you can afford as a show of support.

Time estimate: 90 min.

1.4. Expressions and Assignment Statements ¶

In this lesson, you will learn about assignment statements and expressions that contain math operators and variables.

1.4.1. Assignment Statements ¶

Assignment statements initialize or change the value stored in a variable using the assignment operator = . An assignment statement always has a single variable on the left hand side. The value of the expression (which can contain math operators and other variables) on the right of the = sign is stored in the variable on the left.

Figure 1: Assignment Statement (variable = expression;) ¶

Instead of saying equals for the = in an assignment statement, say “gets” or “is assigned” to remember that the variable gets or is assigned the value on the right. In the figure above score is assigned the value of the expression 10 times points (which is another variable) plus 5.

The following video by Dr. Colleen Lewis shows how variables can change values in memory using assignment statements.

As we saw in the video, we can set one variable’s value to a copy of the value of another variable like y = x; . This won’t change the value of the variable that you are copying from.

Let’s step through the following code in the Java visualizer to see the values in memory. Click on the Next button at the bottom of the code to see how the values of the variables change. You can run the visualizer on any Active Code in this e-book by just clicking on the Code Lens button at the top of each Active Code.

Activity: CodeLens 1.4.1.2 (asgn_viz1)

1-4-3: What are the values of x, y, and z after the following code executes? You can step through this code by clicking on this Java visualizer link.

x = 0, y = 1, z = 2
These are the initial values in the variable, but the values are changed.
x = 1, y = 2, z = 3
x changes to y's initial value, y's value is doubled, and z is set to 3
x = 2, y = 2, z = 3
Remember that the equal sign doesn't mean that the two sides are equal. It sets the value for the variable on the left to the value from evaluating the right side.
x = 0, y = 0, z = 3

The following has the correct code to ‘swap’ the values in x and y (so that x ends up with y’s initial value and y ends up with x’s initial value), but the code is mixed up and contains one extra block which is not needed in a correct solution. Drag the needed blocks from the left into the correct order on the right. Check your solution by clicking on the Check button. You will be told if any of the blocks are in the wrong order or if you need to remove one or more blocks. After three incorrect attempts you will be able to use the Help Me button to make the problem easier.

1.4.2. Adding 1 to a Variable ¶

If you use a variable to keep score, you would probably increment it (add one to the current value) whenever score should go up. You can do this by setting the variable to the current value of the variable plus one ( score = score + 1 ) as shown below. The formula would look strange in math class, but it makes sense in coding because it is assigning a new value to the variable on the left that comes from evaluating the arithmetic expression on the right. So, the score variable is set to the previous value of score plus 1.

Try the code below to see how score is incremented by 1. Try substituting 2 instead of 1 to see what happens.

1.4.3. Input with Variables ¶

Variables are a powerful abstraction in programming because the same algorithm can be used with different input values saved in variables. The code below ( Java Scanner Input Repl using the Scanner class or Java Console Input Repl using the Console class) will say hello to anyone who types in their name for different name values. Click on run and then type in your name. Then, try run again and type in a friend’s name. The code works for any name: behold, the power of variables!

Although you will not be tested in the AP CSA exam on using the Java input or the Scanner or Console classes, learning how to do input in Java is very useful and fun. For more information on using the Scanner class, go to https://www.w3schools.com/java/java_user_input.asp , and for the newer Console class, https://howtodoinjava.com/java-examples/console-input-output/ .

1.4.4. Operators ¶

Java uses the standard mathematical operators for addition ( + ), subtraction ( - ), and division ( / ). The multiplication operator is written as * , as it is in most programming languages, since the character sets used until relatively recently didn’t have a character for a real multiplication sign, × , and keyboards still don’t have a key for it. Likewise no ÷ .

You may be used to using ^ for exponentiation, either from a graphing calculator or tools like Desmos. Confusingly ^ is an operator in Java, but it has a completely different meaning than exponentiation and isn’t even exactly an arithmetic operator. You will learn how to use the Math.pow method to do exponents in Unit 2.

Arithmetic expressions can be of type int or double . An arithmetic expression consisting only of int values will evaluate to an int value. An arithmetic expression that uses at least one double value will evaluate to a double value. (You may have noticed that + was also used to combine String and other values into new String s. More on this when we talk about String s more fully in Unit 2.)

Java uses the operator == to test if the value on the left is equal to the value on the right and != to test if two items are not equal. Don’t get one equal sign = confused with two equal signs == . They mean very different things in Java. One equal sign is used to assign a value to a variable. Two equal signs are used to test a variable to see if it is a certain value and that returns true or false as you’ll see below. Also note that using == and != with double values can produce surprising results. Because double values are only an approximation of the real numbers even things that should be mathematically equivalent might not be represented by the exactly same double value and thus will not be == . To see this for yourself, write a line of code below to print the value of the expression 0.3 == 0.1 + 0.2 ; it will be false !

Run the code below to see all the operators in action. Do all of those operators do what you expected? What about 2 / 3? Isn’t it surprising that it prints 0? See the note below.

When Java sees you doing integer division (or any operation with integers) it assumes you want an integer result so it throws away anything after the decimal point in the answer. This is called truncating division . If you need a double answer, you should make at least one of the values in the expression a double like 2.0.

With division, another thing to watch out for is dividing by 0. An attempt to divide an integer by zero will result in an ArithmeticException error message. Try it in one of the active code windows above.

Operators can be used to create compound expressions with more than one operator. You can either use a literal value which is a fixed value like 2, or variables in them. When compound expressions are evaluated, operator precedence rules are used, just like when we do math (remember PEMDAS?), so that * , / , and % are done before + and - . However, anything in parentheses is done first. It doesn’t hurt to put in extra parentheses if you are unsure as to what will be done first or just to make it more clear.

In the example below, try to guess what it will print out and then run it to see if you are right. Remember to consider operator precedence . How do the parentheses change the precedence?

1.4.5. The Remainder Operator ¶

The operator % in Java is the remainder operator. Like the other arithmetic operators is takes two operands. Mathematically it returns the remainder after dividing the first number by the second, using truncating integer division. For instance, 5 % 2 evaluates to 1 since 2 goes into 5 two times with a remainder of 1.

While you may not have heard of remainder as an operator, think back to elementary school math. Remember when you first learned long division, before they taught you about decimals, how when you did a long division that didn’t divide evenly, you gave the answer as the number of even divisions and the remainder. That remainder is what is returned by this operator. In the figures below, the remainders are the same values that would be returned by 2 % 3 and 5 % 2 .

Figure 1: Long division showing the integer result and the remainder ¶

Sometimes people—including Professor Lewis in the next video—will call % the modulo , or mod , operator. That is not actually correct though the difference between remainder and modulo, which uses Euclidean division instead of truncating integer division, only matters when negative operands are involved and the signs of the operands differ. With positive operands, remainder and mod give the same results. Java does have a method Math.floorMod in the Math class if you need to use modulo instead of remainder, but % is all you need in the AP exam.

Here’s the video .

In the example below, try to guess what it will print out and then run it to see if you are right.

The result of x % y when x is smaller than y is always x. The value y can’t go into x at all (goes in 0 times), since x is smaller than y, so the result is just x. So if you see 2 % 3 the result is 2.

1-4-10: What is the result of 158 % 10?

This would be the result of 158 divided by 10. % gives you the remainder.
% gives you the remainder after the division.
When you divide 158 by 10 you get a remainder of 8.

1-4-11: What is the result of 3 % 8?

8 goes into 3 no times so the remainder is 3. The remainder of a smaller number divided by a larger number is always the smaller number!
This would be the remainder if the question was 8 % 3 but here we are asking for the reminder after we divide 3 by 8.
What is the remainder after you divide 3 by 8?

1.4.6. Programming Challenge : Dog Years ¶

In this programming challenge, you will calculate your age, and your pet’s age from your birthdates, and your pet’s age in dog years. In the code below, type in the current year, the year you were born, the year your dog or cat was born (if you don’t have one, make one up!) in the variables below. Then write formulas in assignment statements to calculate how old you are, how old your dog or cat is, and how old they are in dog years which is 7 times a human year. Finally, print it all out. If you are pair programming, switch drivers (who has control of the keyboard in pair programming) after every line of code.

Calculate your age and your pet’s age from the birthdates, and then your pet’s age in dog years.

Your teacher may suggest that you use a Java IDE like repl.it for this challenge so that you can use input to get these values using the Scanner class . Here is a repl template that you can use to get started if you want to try the challenge with input.

1.4.7. Summary ¶

Arithmetic expressions include expressions of type int and double .

The arithmetic operators consist of + , - , * , / , and % also known as addition, subtraction, multiplication, division, and remainder.

An arithmetic operation that uses two int values will evaluate to an int value. With integer division, any decimal part in the result will be thrown away.

An arithmetic operation that uses at least one double value will evaluate to a double value.

Operators can be used to construct compound expressions.

During evaluation, operands are associated with operators according to operator precedence to determine how they are grouped. ( * , / , % have precedence over + and - , unless parentheses are used to group those.)

An attempt to divide an integer by zero will result in an ArithmeticException .

The assignment operator ( = ) allows a program to initialize or change the value stored in a variable. The value of the expression on the right is stored in the variable on the left.

During execution, expressions are evaluated to produce a single value.

The value of an expression has a type based on the types of the values and operators used in the expression.

1.4.8. AP Practice ¶

The following is a 2019 AP CSA sample question.

1-4-13: Consider the following code segment.

What is printed when the code segment is executed?

0.666666666666667
Don't forget that division and multiplication will be done first due to operator precedence.
Yes, this is equivalent to (5 + ((a/b)*c) - 1).
Don't forget that division and multiplication will be done first due to operator precedence, and that an int/int gives an int truncated result where everything to the right of the decimal point is dropped.

clear sunny desert yellow sand with celestial snow bridge

1.7 Java | Assignment Statements & Expressions

An assignment statement designates a value for a variable. An assignment statement can be used as an expression in Java.

After a variable is declared, you can assign a value to it by using an assignment statement . In Java, the equal sign = is used as the assignment operator . The syntax for assignment statements is as follows:

An expression represents a computation involving values, variables, and operators that, when taking them together, evaluates to a value. For example, consider the following code:

You can use a variable in an expression. A variable can also be used on both sides of the = operator. For example:

In the above assignment statement, the result of x + 1 is assigned to the variable x . Let’s say that x is 1 before the statement is executed, and so becomes 2 after the statement execution.

To assign a value to a variable, you must place the variable name to the left of the assignment operator. Thus the following statement is wrong:

Note that the math equation x = 2 * x + 1 ≠ the Java expression x = 2 * x + 1

Java Assignment Statement vs Assignment Expression

Which is equivalent to:

And this statement

is equivalent to:

Note: The data type of a variable on the left must be compatible with the data type of a value on the right. For example, int x = 1.0 would be illegal, because the data type of x is int (integer) and does not accept the double value 1.0 without Type Casting .

◄◄◄BACK | NEXT►►►

What's Your Opinion? Cancel reply

Enhance your Brain

Subscribe to Receive Free Bio Hacking, Nootropic, and Health Information

HTML for Simple Website Customization My Personal Web Customization Personal Insights

DISCLAIMER | Sitemap | ◘

HTML for Simple Website Customization My Personal Web Customization Personal Insights SEO Checklist Publishing Checklist My Tools