what do you need for a case study

How to Write a Case Study: A Breakdown of Requirements

It can take months to develop a case study. First, a topic must be chosen. Then the researcher must state his hypothesis, and make certain it lines up with the chosen topic. Then all the research must be completed. The case study can require both quantitative and qualitative research, as well as interviews with subjects. Once that is all done, it is time to write the case study.

Not all case studies are written the same. Depending on the size and topic of the study, it could be hundreds of pages long. Regardless of the size, the case study should have four main sections. These sections are:

1. Introduction

2. Background

3. Presentation of Findings

4. Conclusion

The Introduction

The introduction should set the stage for the case study, and state the thesis for the report. The intro must clearly articulate what the study's intention is, as well as how you plan on explaining and answering the thesis.

Again, remember that a case study is not a formal scientific research report that will only be read by scientists. The case study must be able to be read and understood by the layperson, and should read almost as a story, with a clear narrative.

As the reader reads the introduction, they should fully understand what the study is about, and why it is important. They should have a strong foundation for the background they will learn about in the next section.

The introduction should not be long. You must be able to introduce your topic in one or two paragraphs. Ideally, the introduction is one paragraph of about 3-5 sentences.

The Background

The background should detail what information brought the researcher to pose his hypothesis. It should clearly explain the subject or subjects, as well as their background information. And lastly, the background must give the reader a full understanding of the issue at hand, and what process will be taken with the study. Photos and videos are always helpful when applicable.

When writing the background, the researcher must explain the research methods used, and why. The type of research used will be dependent on the type of case study. The reader should have a clear idea why a particular type of research is good for the field and type of case study.

For example, a case study that is trying to determine what causes PTSD in veterans will heavily use interviews as a research method. Directly interviewing subjects garners invaluable research for the researcher. If possible, reference studies that prove this.

Again, as with the introduction, you do not want to write an extremely long background. It is important you provide the right amount of information, as you do not want to bore your readers with too much information, and you don't want them under-informed.

How much background information should a case study provide? What would happen if the case study had too much background info?

What would happen if the case study had too little background info?

The Presentation of Findings

While a case study might use scientific facts and information, a case study should not read as a scientific research journal or report. It should be easy to read and understand, and should follow the narrative determined in the first step.

The presentation of findings should clearly explain how the topic was researched, and summarize what the results are. Data should be summarized as simply as possible so that it is understandable by people without a scientific background. The researcher should describe what was learned from the interviews, and how the results answered the questions asked in the introduction.

When writing up the report, it is important to set the scene. The writer must clearly lay out all relevant facts and detail the most important points. While this section may be lengthy, you do not want to overwhelm the reader with too much information.

The Conclusion

The final section of the study is the conclusion. The purpose of the study isn't necessarily to solve the problem, only to offer possible solutions. The final summary should be an end to the story.

Remember, the case study is about asking and answering questions. The conclusion should answer the question posed by the researcher, but also leave the reader with questions of his own. The researcher wants the reader to think about the questions posed in the study, and be free to come to their own conclusions as well.

When reading the conclusion, the reader should be able to have the following takeaways:

Was there a solution provided? If so, why was it chosen?

Was the solution supported with solid evidence?

Did the personal experiences and interviews support the solution?

The conclusion should also make any recommendations that are necessary. What needs to be done, and you exactly should do it? In the case of the vets with PTSD, once a cause is determined, who is responsible for making sure the needs of the veterans are met?

English Writing Standards For Case Studies

When writing the case study, it is important to follow standard academic and scientific rules when it comes to spelling and grammar.

Spelling and Grammar

It should go without saying that a thorough spell check should be done. Remember, many case studies will require words or terms that are not in standard online dictionaries, so it is imperative the correct spelling is used. If possible, the first draft of the case study should be reviewed and edited by someone other than yourself.

Case studies are normally written in the past tense, as the report is detailing an event or topic that has since passed. The report should be written using a very logical and clear tone. All case studies are scientific in nature and should be written as such.

The First Draft

You do not sit down and write the case study in one day. It is a long and detailed process, and it must be done carefully and with precision. When you sit down to first start writing, you will want to write in plain English, and detail the what, when and how.

When writing the first draft, note any relevant assumptions. Don't immediately jump to any conclusions; just take notes of any initial thoughts. You are not looking for solutions yet. In the first draft use direct quotes when needed, and be sure to identify and qualify all information used.

If there are any issues you do not understand, the first draft is where it should be identified. Make a note so you return to review later. Using a spreadsheet program like Excel or Google Sheets is very valuable during this stage of the writing process, and can help keep you and your information and data organized.

The Second Draft

To prepare the second draft, you will want to assemble everything you have written thus far. You want to reduce the amount of writing so that the writing is tightly written and cogent. Remember, you want your case study to be interesting to read.

When possible, you should consider adding images, tables, maps, or diagrams to the text to make it more interesting for the reader. If you use any of these, make sure you have permission to use them. You cannot take an image from the Internet and use it without permission.

Once you have completed the second draft, you are not finished! It is imperative you have someone review your work. This could be a coworker, friend, or trusted colleague. You want someone who will give you an honest review of your work, and is willing to give you feedback, whether positive or negative.

Remember, you cannot proofread enough! You do not want to risk all of your hard work and research, and end up with a final case study that has spelling or grammatical errors. One typo could greatly hurt your project and damage your reputation in your field.

All case studies should follow LIT – Logical – Inclusive – Thorough.

The case study obviously must be logical. There can be no guessing or estimating. This means that the report must state what was observed, but cannot include any opinion or assumptions that might come from such an observation.

For example, if a veteran subject arrives at an interview holding an empty liquor bottle and is slurring his words, that observation must be made. However, the researcher cannot make the inference that the subject was intoxicated. The report can only include the facts.

With the Genie case, researchers witnessed Genie hitting herself and practicing self-harm. It could be assumed that she did this when she was angry. However, this wasn't always the case. She would also hit herself when she was afraid, bored or apprehensive. It is essential that researchers not guess or infer.

In order for a report to be inclusive, it must contain ALL data and findings. The researcher cannot pick and choose which data or findings to use in the report.

Using the example above, if a veteran subject arrives for an interview holding an empty liquor bottle and is slurring his words; any and all additional information that can be garnered should be recorded. For instance, what the subject was wearing, what was his demeanor, was he able to speak and communicate, etc.

When observing a man who might be drunk, it can be easy to make assumptions. However, the researcher cannot allow personal biases or beliefs to sway the findings. Any and all relevant facts must be included, regardless of size or perceived importance. Remember, small details might not seem relevant at the time of the interview. But once it is time to catalog the findings, small details might become important.

The last tip is to be thorough. It is important to delve into every observation. The researcher shouldn't just write down what they see and move on. It is essential to detail as much as possible.

For example, when interviewing veteran subjects, there interview responses are not the only information that should be garnered from the interview. The interviewer should use all senses when detailing their subject.

How does the subject appear? Is he clean? How is he dressed?

How does his voice sound? Is he speaking clearly and making cohesive thoughts? Does his voice sound raspy? Does he speak with a whisper, or does he speak too loudly?

Does the subject smell? Is he wearing cologne, or can you smell that he hasn't bathed or washed his clothes? What do his clothes look like? Is he well dressed, or does he wear casual clothes?

What is the background of the subject? What are his current living arrangements? Does he have supportive family and friends? Is he a loner who doesn't have a solid support system? Is the subject working? If so, is he happy with the job? If he is not employed, why is that? What makes the subject unemployable?

Case Studies in Marketing

We have already determined that case studies are very valuable in the business world. This is particularly true in the marketing field, which includes advertising and public relations. While case studies are almost all the same, marketing case studies are usually more dependent on interviews and observations.

Well-Known Marketing Case Studies

DeBeers is a diamond company headquartered in Luxembourg, and based in South Africa. It is well known for its logo, "A diamond is forever", which has been voted the best advertising slogan of the 20 th century.

Many studies have been done about DeBeers, but none are as well known as their marketing case study, and how they positioned themselves to be the most successful and well-known diamond company in the world.

DeBeers developed the idea for a diamond engagement ring. They also invented the "eternity band", which is a ring that has diamonds going all around it, signifying that long is forever.

They also invented the three-stone ring, signifying the past, present and future. De Beers was the first company to attribute their products, diamonds to the idea of love and romance. They originated the idea that an engagement ring should cost two-months salary.

The two-month salary standard is particularly unique, in that it is totally subjective. A ring should mean the same whether the man makes $25,000 a year or $250,000. And yet, the standard sticks due to DeBeers incredible marketing skills.

The De Beers case study is one of the most famous studies when it comes to both advertising and marketing, and is used worldwide as the ultimate example of a successful ongoing marketing campaign.

Planning the Market Research

The most important parts of the marketing case study are:

1. The case study's questions

2. The study's propositions

3. How information and data will be analyzed

4. The logic behind what is being proposed

5. How the findings will be interpreted

The study's questions should be either "how" or "why" questions, and their definitions are the researchers first job. These questions will help determine the study's goals.

Not every case study has a proposition. If you are doing an exploratory study, you will not have propositions. Instead, you will have a stated purpose, which will determine whether your study is successful, or not.

How the information will be analyzed will depend on what the topic is. This would vary depending on whether it was a person, group, or organization. Event and place studies are done differently.

When setting up your research, you will want to follow case study protocol. The protocol should have the following sections:

1. An overview of the case study, including the objectives, topic and issues.

2. Procedures for gathering information and conducting interviews.

3. Questions that will be asked during interviews and data collection.

4. A guide for the final case study report.

When deciding upon which research methods to use, these are the most important:

1. Documents and archival records

2 . Interviews

3. Direct observations (and indirect when possible)

4. Indirect observations, or observations of subjects

5. Physical artifacts and tools

Documents could include almost anything, including letters, memos, newspaper articles, Internet articles, other case studies, or any other document germane to the study.

Developing the Case Study

Developing a marketing case study follows the same steps and procedures as most case studies. It begins with asking a question, "what is missing?"

1. What is the background of the case study? Who requested the study to be done and why? What industry is the study in, and where will the study take place? What marketing needs are you trying to address?

2. What is the problem that needs a solution? What is the situation, and what are the risks? What are you trying to prove?

3. What questions are required to analyze the problem? What questions might the reader of the study have?

4. What tools are required to analyze the problem? Is data analysis necessary? Can the study use just interviews and observations, or will it require additional information?

5. What is your current knowledge about the problem or situation? How much background information do you need to procure? How will you obtain this background info?

6. What other information do you need to know to successfully complete the study?

7. How do you plan to present the report? Will it be a simple written report, or will you add PowerPoint presentations or images or videos? When is the report due? Are you giving yourself enough time to complete the project?

Formulating the Marketing Case Study

1. What is the marketing problem? Most case studies begin with a problem that management or the marketing department is facing. You must fully understand the problem and what caused it. That is when you can start searching for a solution.

However, marketing case studies can be difficult to research. You must turn a marketing problem into a research problem. For example, if the problem is that sales are not growing, you must translate that to a research problem.

What could potential research problems be?

Research problems could be poor performance or poor expectations. You want a research problem because then you can find an answer. Management problems focus on actions, such as whether to advertise more, or change advertising strategies. Research problems focus on finding out how to solve the management problem.

Method of Inquiry

As with the research for most case studies, the scientific method is standard. It allows you to use existing knowledge as a starting point. The scientific method has the following steps:

1. Ask a question – formulate a problem

2. Do background research

3. Formulate a problem

4. Develop/construct a hypothesis

5. Make predictions based on the hypothesis

6. Do experiments to test the hypothesis

7 . Conduct the test/experiment

8 . Analyze and communicate the results

The above terminology is very similar to the research process. The main difference is that the scientific method is objective and the research process is subjective. Quantitative research is based on impartial analysis, and qualitative research is based on personal judgment.

Research Method

After selecting the method of inquiry, it is time to decide on a research method. There are two main research methodologies, experimental research and non-experimental research.

Experimental research allows you to control the variables and to manipulate any of the variables that influence the study.

Non-experimental research allows you to observe, but not intervene. You just observe and then report your findings.

Research Design

The design is the plan for how you will conduct the study, and how you will collect the data. The design is the scientific method you will use to obtain the information you are seeking.

Data Collection

There are many different ways to collect data, with the two most important being interviews and observation.

Interviews are when you ask people questions and get a response. These interviews can be done face-to-face, by telephone, the mail, email, or even the Internet. This category of research techniques is survey research. Interviews can be done in both experimental and non-experimental research.

Observation is watching a person or company's behavior. For example, by observing a persons buying behavior, you could predict how that person will make purchases in the future.

When using interviews or observation, it is required that you record your results. How you record the data will depend on which method you use. As with all case studies, using a research notebook is key, and will be the heart of the study.

Sample Design

When developing your case study, you won't usually examine an entire population; those are done by larger research projects. Your study will use a sample, which is a small representation of the population. When designing your sample, be prepared to answer the following questions:

1. From which type of population should the sample be chosen?

2. What is the process for the selection of the sample?

3. What will be the size of the sample?

There are two ways to select a sample from the general population; probability and non-probability sampling. Probability sampling uses random sampling of everyone in the population. Non-probability sampling uses the judgment of the researcher.

The last step of designing your sample is to determine the sample size. This can depend on cost and accuracy. Larger samples are better and more accurate, but they can also be costly.

Analysis of the Data

In order to use the data, it first must be analyzed. How you analyze the data should be decided upon as early in the process as possible, and will vary depending on the type of info you are collecting, and the form of measurement being used. As stated repeatedly, make sure you keep track of everything in the research notebook.

The Marketing Case Study Report

The final stage of the process is the marketing case study. The final study will include all of the information, as well as detail the process. It will also describe the results, conclusions, and any recommendations. It must have all the information needed so that the reader can understand the case study.

As with all case studies, it must be easy to read. You don't want to use info that is too technical; otherwise you could potentially overwhelm your reader. So make sure it is written in plain English, with scientific and technical terms kept to a minimum.

Using Your Case Study

Once you have your finished case study, you have many opportunities to get that case study in front of potential customers. Here is a list of the ways you can use your case study to help your company's marketing efforts.

1. Have a page on your website that is dedicated to case studies. The page should have a catchy name and list all of the company's case studies, beginning with the most recent. Next to each case study list its goals and results.

2. Put the case study on your home page. This will put your study front and center, and will be immediately visible when customers visit your web page. Make sure the link isn't hidden in an area rarely visited by guests. You can highlight the case study for a few weeks or months, or until you feel your study has received enough looks.

3. Write a blog post about your case study. Obviously you must have a blog for this to be successful. This is a great way to give your case study exposure, and it allows you to write the post directly addressing your audience's needs.

4 . Make a video from your case study. Videos are more popular than ever, and turning a lengthy case study into a brief video is a great way to get your case study in front of people who might not normally read a case study.

5. Use your case study on a landing page. You can pull quotes from the case study and use those on product pages. Again, this format works best when you use market segmentation.

6. Post about your case studies on social media. You can share links on Twitter, Facebook and LinkedIn. Write a little interesting tidbit, enough to capture your client's interest, and then place the link.

7 . Use your case study in your email marketing. This is most effective if your email list is segmented, and you can direct your case study to those most likely to be receptive to it.

8. Use your case studies in your newsletters. This can be especially effective if you use segmentation with your newsletters, so you can gear the case study to those most likely to read and value it.

• Course Catalog
• Group Discounts
• Gift Certificates
• For Libraries
• CEU Verification
• Medical Terminology
• Accounting Course
• Writing Basics
• QuickBooks Training
• Proofreading Class
• Sensitivity Training
• Excel Certificate
• Teach Online
• Terms of Service
• Privacy Policy

How to Write a Case Study: Step-by-Step Guide with Examples

• October 7, 2022

Content Manager at SocialBee

Why is learning how to write a case study so important?

Well, because it provides your customers with social proof and supporting evidence of how effective your products and services are. Moreover, it eliminates the doubt that usually makes clients give up on their next purchase.

That is why today we are going to talk about the step-by-step process of writing a case study . We prepared five business case study examples guaranteed to inspire you throughout the process.

Let’s get started!

What Is a Case Study?

A case study is a piece of content that focuses on a case from your business history. It describes the problems your client faced and the solutions you used to help them succeed.

The goal of a writing case study is to promote your business , so your aim should be to put together a compelling story with evidence that backs up all your claims.

Case studies use real-life examples to show your clients the quality and effectiveness of your products and services. It’s a marketing tool that provides credibility and it helps your potential clients gain confidence in your brand.

Case studies can be structured in different formats:

• A written document
• An infographic
• A blog post
• A landing page

Case Study Benefits

A great case study makes your potential customers want to benefit from the products and services that helped your client overcome their challenges. 

Here are the benefits of writing a case study:

• It is an affordable marketing practice
• It decreases the perceived risk of your potential clients
• It provides transparency
• It builds trust and credibility among prospective customers
• It makes your potential clients relate to the problem
• It provides your potential clients with a solution for their problems

How to Write a Case Study

Now that you know what a case study is, let’s get into the real reason why you are here — learning how to write an in-depth study.

Here is the step-by-step process of writing a case study:

• Identify the topic of your case study
• Start collaborating with a client
• Prepare questions for the interview
• Conduct the case study interview
• Structure your case study 
• Make it visual

Step 1: Identify the Topic of Your Case Study

A case study starts with a strategy. Choosing what you want to write about should be closely related to your business needs. More specifically, what service or product do you want to promote through your case study?

Because case studies focus on client challenges, business solutions, and results, you have to carefully pick the case that your potential clients will relate to the most. 

To communicate the benefits of your business, you should focus on a customer story that appeals to a specific segment of your audience . Consequently, you will target clients that relate to your customer example while providing a solution for their needs and pain points — your products and services.

Start by focusing all your research methods on identifying your customers’ main pain points. Then find examples of how your products or services have helped them overcome their challenges and achieve their goals .

Furthermore, to make sure you choose the best case study topic for your buyer persona , you should have a meeting with your sales/customer service team. Because they are in close contact with your customers, they will be able to tell you:

• The main challenges your clients face 
• The services/products that bring them the best results 

These are the main two pieces of information you want your case study to focus on.

Step 2: Start Collaborating with a Client

With a clear topic in mind, you have to find the best fit for your case study. 

However, that is not all. First, you must obtain the client’s permission. After all, your business story is theirs too.

So, craft an email to provide your client with an overview of the case study. This will help them make a decision. 

Your message should include:

• The case study format (video, written, etc.) and where it will be published (blog, landing page , etc.)
• The topic of the document
• The timeline of the process
• The information that will be included
• The benefits they get as a result of this collaboration (brand exposure, backlinks)

Additionally, you can offer to schedule a call or a meeting to answer all their questions and curiosities and provide a means for clear and open communication.

Once you receive a positive response from your client, you can continue with the next step of the process: the actual interview.

PRO TIP: A great way to ensure a smooth and safe collaboration between you and your client is to sign a legal release form before writing the case study. This will allow you to use their information and protect you from issues that may occur in the future. Moreover, if the client is not comfortable with revealing their identity, you can always offer them anonymity.

Step 3: Prepare Questions for the Interview

Now that you have the subject for your case study, it’s time to write and organize your interview in several sets of questions.

Don’t forget that the whole structure of your case study is based on the information you get from your customer interview.

So pay attention to the way you phrase the questions. After all, your goal is to gather all the data you need to avoid creating a back-and-forth process that will consume your client’s time and energy.

To help you create the best questionnaire, we created a set of case study questions and organized them into different categories. 

Here are the five main sections your case study interview should contain:

• The client’s background information
• The problem
• The start of the collaboration
• The solution
• The results

A. The Client’s Background Information

This part of the case study interview must give a comprehensive look into your customer’s business and allow your readers to get to know them better.

Here are some question ideas:

B. The Problem

Now it’s time to get into the reason your client came to you for assistance, the initial challenge that triggered your collaboration.

In this part of the interview process, you want to find out what made them ask for help and what was their situation before working with you.

You can ask your client the following case study questions:

C. The Start of the Collaboration

This part of the case study interview will focus on the process that made your collaboration possible. More specifically, how did your client research possible collaboration opportunities, and why they chose your business? 

This information will not only be informative for your future customers but will also give you a behind-the-scenes look into their decision-making process.

D. The Solution

It’s time to get into one of the most significant parts of the case study interview — the solution. Here you should discuss how your services have helped their business recover from the problems mentioned before.

Make sure you ask the right questions so you can really paint the picture of a satisfied customer.

Have a look at these question examples:

E. The Results

The best proof you can give to your customers is through your results. And this is the perfect opportunity to let your actions speak for themselves.

Unlike the other marketing strategies you use to promote your business, the content is provided by your customer, not by your team. As a result, you end up with a project that is on another level of reliability.

Here is how you can ask your client about their results:

Step 4: Conduct the Case Study Interview

Now that you have a great set of case study questions, it’s time to put them to good use.

Decide on the type of interview you want to conduct: face-to-face, video call , or phone call. Then, consult with your client and set up a date and a time when you are both available. 

It should be noted that during the interview it’s best to use a recording device for accuracy. Maybe you don’t have time to write down all the information, and you forget important details. Or maybe you want to be focused more on the conversational aspect of the interview, and you don’t want to write anything down while it’s happening.

Step 5: Structure Your Case Study 

The hard part is over. Now it’s time to organize all the information you gathered in an appealing format. Let’s have a look at what your case study should contain.

Here are the components of a case study:

• Engaging title
• Executive summary
• Client description 
• Introduction to the problem
• The problem-solving process
• Progress and results

A. Engaging Title

Putting that much work into a project, it would be a shame not to do your best to attract more readers. So, take into consideration that you only have a few seconds to catch your audience’s attention. 

You can also use a headline analyzer to evaluate the performance of your title.

The best case study titles contain:

• Relevant keywords
• Customer pain points
• Clear result

Case study example :

B. Executive Summary

Your executive summary should include a thesis statement that sums up the main points of your case study. Therefore, it must be clear and concise. Moreover, to make your audience curious, you can add a statistic or a relevant piece of data that they might be interested in.

Here is what you should include in your executive summary:

• The business you are writing about (only if the clients wants to make themselves known)
• Relevant statistics

C. Client Description 

Here is where you start to include the information you gained from your interview. Provide your readers with a clear picture of your client and create a context for your case study.

Take your client’s answers from the “Client Background” section of the interview and present them in a more appealing format.

D. Introduction to the Problem

In this section, use your client’s interview answers to write about the problem they were experiencing before working with you.

Remember to be specific because you want your audience to fully understand the situation and relate to it. At the end of the day, the goal of the case study is to show your potential customers why they should buy your services/products.

E. The Problem-Solving Process

Next, explain how your service/product helped your client overcome their problems. Moreover, let your readers know how and why your service/product worked in their case.

In this part of the case study, you should summarize: 

• The strategy used to solve the problem of your customer 
• The process of implementing the solution 

F. Progress and Results

Tell your readers about what you and your client have achieved during your collaboration. Here you can include:

• Graphics about your progress
• Business objectives they have achieved
• Relevant metrics 

Step 6: Make It Visual

To elevate the information you have written for your audience, you must make sure it’s appealing and easy to read. And a great way to achieve that is to use visuals that add value to your case study.

Here are some design elements that will make emphasize your text:

• Graphic symbols that guide the eye (arrows, bullet points, checkmarks, etc.)
• Charts, graphics, tables 
• Relevant screenshots from business reports
• The colors and fonts of your brand
• Your client’s logo

Platforms like Canva can really come in handy while designing your case study. It’s easy to use and it has multiple free slide templates and graphics that save you time and money.

PRO TIP: Share Your Case Study Across All Marketing Channels

A case study is a perfect example of evergreen content that can be reshared endlessly on your social media channels .

Aside from helping you maintain a consistent posting schedule with ease, case study-related posts will increase your credibility and push leads toward the bottom of your marketing funnel . Other examples of social proof evergreen content are reviews, testimonials, and positive social media mentions.

To keep track of all your evergreen posts and have them scheduled on a continuous loop, use a social media tool like SocialBee.

Create evergreen content categories where all your posts get reposted regularly on your social media channels. 

Start your 14-day trial today and start using SocialBee for free!

Aside from promoting your case study on social media, you can also feature it in your newsletter that you can create using email newsletter software , include it as a pop-up on your website, and even create a separate landing page dedicated to your customer study.

Share Your Case Study on Social Media with SocialBee!

Get to writing your own case study.

What do you think? Is writing a case study easier than you thought? We sure hope so.

Learning how to write a case study is a simple process once you understand the logical steps that go into it. So make sure you go over the guide a couple of times before you start documenting your customer success stories.

And remember that the goal of your case study is to attract more leads . Therefore you need to include tangible results and valuable details that will compel your audience to invest in your products and services.

Article written by

Content writer at SocialBee

Related articles

Step-by-Step Social Media Management Proposal Guide + Free Template

Are you struggling to craft a winning social media management proposal that grabs attention and seals the deal? You’re not

Social Media Design for Brands: Tips and Examples

How effective is your brand’s social media design? If you think about it, nearly half of all consumers use social

Level up your social media game with exclusive resources delivered straight to your inbox

Proudly supporting

Out of post ideas? Get our social media calendar

Access 500+ content ideas, post examples, and Canva templates.

Use SocialBee’s Free AI Post Generator to create content for your social media profiles.

• Customizable tone of voice
• Several content variations to choose from
• 1000+ pre-made AI prompts

All You Wanted to Know About How to Write a Case Study

What do you study in your college? If you are a psychology, sociology, or anthropology student, we bet you might be familiar with what a case study is. This research method is used to study a certain person, group, or situation. In this guide from our dissertation writing service , you will learn how to write a case study professionally, from researching to citing sources properly. Also, we will explore different types of case studies and show you examples — so that you won’t have any other questions left.

What Is a Case Study?

A case study is a subcategory of research design which investigates problems and offers solutions. Case studies can range from academic research studies to corporate promotional tools trying to sell an idea—their scope is quite vast.

What Is the Difference Between a Research Paper and a Case Study?

While research papers turn the reader’s attention to a certain problem, case studies go even further. Case study guidelines require students to pay attention to details, examining issues closely and in-depth using different research methods. For example, case studies may be used to examine court cases if you study Law, or a patient's health history if you study Medicine. Case studies are also used in Marketing, which are thorough, empirically supported analysis of a good or service's performance. Well-designed case studies can be valuable for prospective customers as they can identify and solve the potential customers pain point.

Case studies involve a lot of storytelling – they usually examine particular cases for a person or a group of people. This method of research is very helpful, as it is very practical and can give a lot of hands-on information. Most commonly, the length of the case study is about 500-900 words, which is much less than the length of an average research paper.

The structure of a case study is very similar to storytelling. It has a protagonist or main character, which in your case is actually a problem you are trying to solve. You can use the system of 3 Acts to make it a compelling story. It should have an introduction, rising action, a climax where transformation occurs, falling action, and a solution.

Here is a rough formula for you to use in your case study:

Problem (Act I): > Solution (Act II) > Result (Act III) > Conclusion.

Types of Case Studies

The purpose of a case study is to provide detailed reports on an event, an institution, a place, future customers, or pretty much anything. There are a few common types of case study, but the type depends on the topic. The following are the most common domains where case studies are needed:

• Historical case studies are great to learn from. Historical events have a multitude of source info offering different perspectives. There are always modern parallels where these perspectives can be applied, compared, and thoroughly analyzed.
• Problem-oriented case studies are usually used for solving problems. These are often assigned as theoretical situations where you need to immerse yourself in the situation to examine it. Imagine you’re working for a startup and you’ve just noticed a significant flaw in your product’s design. Before taking it to the senior manager, you want to do a comprehensive study on the issue and provide solutions. On a greater scale, problem-oriented case studies are a vital part of relevant socio-economic discussions.
• Cumulative case studies collect information and offer comparisons. In business, case studies are often used to tell people about the value of a product.
• Critical case studies explore the causes and effects of a certain case.
• Illustrative case studies describe certain events, investigating outcomes and lessons learned.

Need a compelling case study? EssayPro has got you covered. Our experts are ready to provide you with detailed, insightful case studies that capture the essence of real-world scenarios. Elevate your academic work with our professional assistance.

Case Study Format

The case study format is typically made up of eight parts:

• Executive Summary. Explain what you will examine in the case study. Write an overview of the field you’re researching. Make a thesis statement and sum up the results of your observation in a maximum of 2 sentences.
• Background. Provide background information and the most relevant facts. Isolate the issues.
• Case Evaluation. Isolate the sections of the study you want to focus on. In it, explain why something is working or is not working.
• Proposed Solutions. Offer realistic ways to solve what isn’t working or how to improve its current condition. Explain why these solutions work by offering testable evidence.
• Conclusion. Summarize the main points from the case evaluations and proposed solutions. 6. Recommendations. Talk about the strategy that you should choose. Explain why this choice is the most appropriate.
• Implementation. Explain how to put the specific strategies into action.
• References. Provide all the citations.

How to Write a Case Study

Let's discover how to write a case study.

Setting Up the Research

When writing a case study, remember that research should always come first. Reading many different sources and analyzing other points of view will help you come up with more creative solutions. You can also conduct an actual interview to thoroughly investigate the customer story that you'll need for your case study. Including all of the necessary research, writing a case study may take some time. The research process involves doing the following:

• Define your objective. Explain the reason why you’re presenting your subject. Figure out where you will feature your case study; whether it is written, on video, shown as an infographic, streamed as a podcast, etc.
• Determine who will be the right candidate for your case study. Get permission, quotes, and other features that will make your case study effective. Get in touch with your candidate to see if they approve of being part of your work. Study that candidate’s situation and note down what caused it.
• Identify which various consequences could result from the situation. Follow these guidelines on how to start a case study: surf the net to find some general information you might find useful.
• Make a list of credible sources and examine them. Seek out important facts and highlight problems. Always write down your ideas and make sure to brainstorm.
• Focus on several key issues – why they exist, and how they impact your research subject. Think of several unique solutions. Draw from class discussions, readings, and personal experience. When writing a case study, focus on the best solution and explore it in depth. After having all your research in place, writing a case study will be easy. You may first want to check the rubric and criteria of your assignment for the correct case study structure.

Read Also: ' WHAT IS A CREDIBLE SOURCES ?'

Although your instructor might be looking at slightly different criteria, every case study rubric essentially has the same standards. Your professor will want you to exhibit 8 different outcomes:

• Correctly identify the concepts, theories, and practices in the discipline.
• Identify the relevant theories and principles associated with the particular study.
• Evaluate legal and ethical principles and apply them to your decision-making.
• Recognize the global importance and contribution of your case.
• Construct a coherent summary and explanation of the study.
• Demonstrate analytical and critical-thinking skills.
• Explain the interrelationships between the environment and nature.
• Integrate theory and practice of the discipline within the analysis.

Need Case Study DONE FAST?

Pick a topic, tell us your requirements and get your paper on time.

Case Study Outline

Let's look at the structure of an outline based on the issue of the alcoholic addiction of 30 people.

Introduction

• Statement of the issue: Alcoholism is a disease rather than a weakness of character.
• Presentation of the problem: Alcoholism is affecting more than 14 million people in the USA, which makes it the third most common mental illness there.
• Explanation of the terms: In the past, alcoholism was commonly referred to as alcohol dependence or alcohol addiction. Alcoholism is now the more severe stage of this addiction in the disorder spectrum.
• Hypotheses: Drinking in excess can lead to the use of other drugs.
• Importance of your story: How the information you present can help people with their addictions.
• Background of the story: Include an explanation of why you chose this topic.
• Presentation of analysis and data: Describe the criteria for choosing 30 candidates, the structure of the interview, and the outcomes.
• Strong argument 1: ex. X% of candidates dealing with anxiety and depression...
• Strong argument 2: ex. X amount of people started drinking by their mid-teens.
• Strong argument 3: ex. X% of respondents’ parents had issues with alcohol.
• Concluding statement: I have researched if alcoholism is a disease and found out that…
• Recommendations: Ways and actions for preventing alcohol use.

Writing a Case Study Draft

After you’ve done your case study research and written the outline, it’s time to focus on the draft. In a draft, you have to develop and write your case study by using: the data which you collected throughout the research, interviews, and the analysis processes that were undertaken. Follow these rules for the draft:

• Your draft should contain at least 4 sections: an introduction; a body where you should include background information, an explanation of why you decided to do this case study, and a presentation of your main findings; a conclusion where you present data; and references.
• In the introduction, you should set the pace very clearly. You can even raise a question or quote someone you interviewed in the research phase. It must provide adequate background information on the topic. The background may include analyses of previous studies on your topic. Include the aim of your case here as well. Think of it as a thesis statement. The aim must describe the purpose of your work—presenting the issues that you want to tackle. Include background information, such as photos or videos you used when doing the research.
• Describe your unique research process, whether it was through interviews, observations, academic journals, etc. The next point includes providing the results of your research. Tell the audience what you found out. Why is this important, and what could be learned from it? Discuss the real implications of the problem and its significance in the world.
• Include quotes and data (such as findings, percentages, and awards). This will add a personal touch and better credibility to the case you present. Explain what results you find during your interviews in regards to the problem and how it developed. Also, write about solutions which have already been proposed by other people who have already written about this case.
• At the end of your case study, you should offer possible solutions, but don’t worry about solving them yourself.

Use Data to Illustrate Key Points in Your Case Study

Even though your case study is a story, it should be based on evidence. Use as much data as possible to illustrate your point. Without the right data, your case study may appear weak and the readers may not be able to relate to your issue as much as they should. Let's see the examples from essay writing service :

‍ With data: Alcoholism is affecting more than 14 million people in the USA, which makes it the third most common mental illness there. Without data: A lot of people suffer from alcoholism in the United States.

Try to include as many credible sources as possible. You may have terms or sources that could be hard for other cultures to understand. If this is the case, you should include them in the appendix or Notes for the Instructor or Professor.

Finalizing the Draft: Checklist

After you finish drafting your case study, polish it up by answering these ‘ask yourself’ questions and think about how to end your case study:

• Check that you follow the correct case study format, also in regards to text formatting.
• Check that your work is consistent with its referencing and citation style.
• Micro-editing — check for grammar and spelling issues.
• Macro-editing — does ‘the big picture’ come across to the reader? Is there enough raw data, such as real-life examples or personal experiences? Have you made your data collection process completely transparent? Does your analysis provide a clear conclusion, allowing for further research and practice?

Problems to avoid:

• Overgeneralization – Do not go into further research that deviates from the main problem.
• Failure to Document Limitations – Just as you have to clearly state the limitations of a general research study, you must describe the specific limitations inherent in the subject of analysis.
• Failure to Extrapolate All Possible Implications – Just as you don't want to over-generalize from your case study findings, you also have to be thorough in the consideration of all possible outcomes or recommendations derived from your findings.

How to Create a Title Page and Cite a Case Study

Let's see how to create an awesome title page.

Your title page depends on the prescribed citation format. The title page should include:

• A title that attracts some attention and describes your study
• The title should have the words “case study” in it
• The title should range between 5-9 words in length
• Your name and contact information
• Your finished paper should be only 500 to 1,500 words in length.With this type of assignment, write effectively and avoid fluff

Here is a template for the APA and MLA format title page:

There are some cases when you need to cite someone else's study in your own one – therefore, you need to master how to cite a case study. A case study is like a research paper when it comes to citations. You can cite it like you cite a book, depending on what style you need.

Citation Example in MLA ‍ Hill, Linda, Tarun Khanna, and Emily A. Stecker. HCL Technologies. Boston: Harvard Business Publishing, 2008. Print.

Citation Example in APA ‍ Hill, L., Khanna, T., & Stecker, E. A. (2008). HCL Technologies. Boston: Harvard Business Publishing.

Citation Example in Chicago Hill, Linda, Tarun Khanna, and Emily A. Stecker. HCL Technologies.

Case Study Examples

To give you an idea of a professional case study example, we gathered and linked some below.

Eastman Kodak Case Study

Case Study Example: Audi Trains Mexican Autoworkers in Germany

To conclude, a case study is one of the best methods of getting an overview of what happened to a person, a group, or a situation in practice. It allows you to have an in-depth glance at the real-life problems that businesses, healthcare industry, criminal justice, etc. may face. This insight helps us look at such situations in a different light. This is because we see scenarios that we otherwise would not, without necessarily being there. If you need custom essays , try our research paper writing services .

Get Help Form Qualified Writers

Crafting a case study is not easy. You might want to write one of high quality, but you don’t have the time or expertise. If you’re having trouble with your case study, help with essay request - we'll help. EssayPro writers have read and written countless case studies and are experts in endless disciplines. Request essay writing, editing, or proofreading assistance from our custom case study writing service , and all of your worries will be gone.

Don't Know Where to Start?

Crafting a case study is not easy. You might want to write one of high quality, but you don’t have the time or expertise. Request ' write my case study ' assistance from our service.

What Is A Case Study?

How to cite a case study in apa, how to write a case study, related articles.

• How it works

A Quick Guide to Case Study with Examples

Published by Alvin Nicolas at August 14th, 2021 , Revised On August 29, 2023

A case study is a documented history and detailed analysis of a situation concerning organisations, industries, and markets.

A case study:

• Focuses on discovering new facts of the situation under observation.
• Includes data collection from multiple sources over time.
• Widely used in social sciences to study the underlying information, organisation, community, or event.
• It does not provide any solution to the problem .

When to Use Case Study? 

You can use a case study in your research when:

• The focus of your study is to find answers to how and why questions .
• You don’t have enough time to conduct extensive research; case studies are convenient for completing your project successfully.
• You want to analyse real-world problems in-depth, then you can use the method of the case study.

You can consider a single case to gain in-depth knowledge about the subject, or you can choose multiple cases to know about various aspects of your  research problem .

What are the Aims of the Case Study?

• The case study aims at identifying weak areas that can be improved.
• This method is often used for idiographic research (focuses on individual cases or events).
• Another aim of the case study is nomothetic research (aims to discover new theories through data analysis of multiple cases).

Types of Case Studies

There are different types of case studies that can be categorised based on the purpose of the investigation.

Looking for dissertation help?

Researchprospect to the rescue then.

We have expert writers on our team who are skilled at helping students with dissertations across a variety of STEM disciplines. Guaranteeing 100% satisfaction!

How to Conduct a Case Study?

• Select the Case to Investigate
• Formulate the Research Question
• Review of Literature
• Choose the Precise Case to Use in your Study
• Select Data Collection and Analysis Techniques
• Collect the Data
• Analyse the Data
• Prepare the Report

Step1: Select the Case to Investigate

The first step is to select a case to conduct your investigation. You should remember the following points.

• Make sure that you perform the study in the available timeframe.
• There should not be too much information available about the organisation.
• You should be able to get access to the organisation.
• There should be enough information available about the subject to conduct further research.

Step2: Formulate the Research Question

It’s necessary to  formulate a research question  to proceed with your case study. Most of the research questions begin with  how, why, what, or what can . 

You can also use a research statement instead of a research question to conduct your research which can be conditional or non-conditional. 

Step 3: Review of Literature

Once you formulate your research statement or question, you need to extensively  review the documentation about the existing discoveries related to your research question or statement.

Step 4: Choose the Precise Case to Use in your Study

You need to select a specific case or multiple cases related to your research. It would help if you treated each case individually while using multiple cases. The outcomes of each case can be used as contributors to the outcomes of the entire study.  You can select the following cases. 

• Representing various geographic regions
• Cases with various size parameters
• Explaining the existing theories or assumptions
• Leading to discoveries
• Providing a base for future research.

Step 5: Select Data Collection and Analysis Techniques

You can choose both  qualitative or quantitative approaches  for  collecting the data . You can use  interviews ,  surveys , artifacts, documentation, newspapers, and photographs, etc. To avoid biased observation, you can triangulate  your research to provide different views of your case. Even if you are focusing on a single case, you need to observe various case angles. It would help if you constructed validity, internal and external validity, as well as reliability.

Example: Identifying the impacts of contaminated water on people’s health and the factors responsible for it. You need to gather the data using qualitative and quantitative approaches to understand the case in such cases.

Construct validity:  You should select the most suitable measurement tool for your research. 

Internal validity:   You should use various methodological tools to  triangulate  the data. Try different methods to study the same hypothesis.

External validity:  You need to effectively apply the data beyond the case’s circumstances to more general issues.

Reliability:   You need to be confident enough to formulate the new direction for future studies based on your findings.

Also Read:  Reliability and Validity

Step 6: Collect the Data

Beware of the following when collecting data:

• Information should be gathered systematically, and the collected evidence from various sources should contribute to your research objectives.
• Don’t collect your data randomly.
• Recheck your research questions to avoid mistakes.
• You should save the collected data in any popular format for clear understanding.
• While making any changes to collecting information, make sure to record the changes in a document.
• You should maintain a case diary and note your opinions and thoughts evolved throughout the study.

Step 7: Analyse the Data

The research data identifies the relationship between the objects of study and the research questions or statements. You need to reconfirm the collected information and tabulate it correctly for better understanding. 

Step 8: Prepare the Report

It’s essential to prepare a report for your case study. You can write your case study in the form of a scientific paper or thesis discussing its detail with supporting evidence. 

A case study can be represented by incorporating  quotations,  stories, anecdotes,  interview transcripts , etc., with empirical data in the result section. 

You can also write it in narrative styles using  textual analysis  or   discourse analysis . Your report should also include evidence from published literature, and you can put it in the discussion section.

Advantages and Disadvantages of Case Study

Frequently asked questions, what is the case study.

A case study is a research method where a specific instance, event, or situation is deeply examined to gain insights into real-world complexities. It involves detailed analysis of context, data, and variables to understand patterns, causes, and effects, often used in various disciplines for in-depth exploration.

You May Also Like

Discourse analysis is an essential aspect of studying a language. It is used in various disciplines of social science and humanities such as linguistic, sociolinguistics, and psycholinguistic.

A variable is a characteristic that can change and have more than one value, such as age, height, and weight. But what are the different types of variables?

Sampling methods are used to to draw valid conclusions about a large community, organization or group of people, but they are based on evidence and reasoning.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• EDIT Edit this Article
• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• Browse Articles
• Learn Something New
• Quizzes Hot
• This Or That Game New
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Education and Communications

How to Write a Case Study

Last Updated: April 1, 2024 Approved

This article was co-authored by Annaliese Dunne . Annaliese Dunne is a Middle School English Teacher. With over 10 years of teaching experience, her areas of expertise include writing and grammar instruction, as well as teaching reading comprehension. She is also an experienced freelance writer. She received her Bachelor's degree in English. wikiHow marks an article as reader-approved once it receives enough positive feedback. In this case, 82% of readers who voted found the article helpful, earning it our reader-approved status. This article has been viewed 580,628 times.

There are many different kinds of case studies. There are also various uses for writing case studies, from academic research purposes to provision of corporate proof points. There are approximately four types of case studies: illustrative (descriptive of events), exploratory (investigative), cumulative (collective information comparisons) and critical (examine particular subject with cause and effect outcomes). After becoming familiar with the different types and styles of case study instructions and how each applies to your purposes, there are some steps that make writing flow smoothly and ensure the development and delivery of a uniform case study that can be used to prove a point or illustrate accomplishments.

Getting Started

• Whatever case study method you're employing, your purpose is to thoroughly analyze a situation (or "case") which could reveal factors or information otherwise ignored or unknown. These can be written about companies, whole countries, or even individuals. What's more, these can be written on more abstract things, like programs or practices. Really, if you can dream it, you can write a case study about it. [1] X Research source

• Start your research at the library and/or on the Internet to begin delving into a specific problem. Once you've narrowed down your search to a specific problem, find as much about it as you can from a variety of different sources. Look up information in books, journals, DVDs, websites, magazines, newspapers, etc. As you go through each one, take adequate notes so you can find the info later on! [1] X Research source

• Find out what has been written before, and read the important articles about your case's situation . When you do this, you may find there is an existing problem that needs solution, or you may find that you have to come up with an interesting idea that might or might not work in your case situation.
• Review sample case studies that are similar in style and scope to get an idea of composition and format, too.

Preparing the Interview

• Find knowledgeable people to interview. They don't necessarily have to be on your site, but they must be, actively or in the past, directly involved.
• Determine whether you will interview an individual or group of individuals to serve as examples in your case study. It may be beneficial for participants to gather as a group and provide insight collectively. If the study focuses on personal subject matter or medical issues, it may be better to conduct personal interviews.
• Gather as much information as possible about your subjects to ensure that you develop interviews and activities that will result in obtaining the most advantageous information to your study.

• When you are interviewing people, ask them questions that will help you understand their opinions. I.e., How do you feel about the situation? What can you tell me about how the site (or the situation) developed? What do you think should be different, if anything? You also need to ask questions that will give you facts that might not be available from an article--make your work different and purposeful.

• Make sure all your informants are aware of what you're doing. They need to be fully informed (and signing waivers in certain cases) and your questions need to be appropriate and not controversial.

Obtaining Data

• When you ask a question that doesn't let someone answer with a "yes" or a "no" you usually get more information. What you are trying to do is get the person to tell you whatever it is that he or she knows and thinks --even though you don't always know just what that is going to be before you ask the question. Keep your questions open-ended.
• Request data and materials from subjects as applicable to add credibility to your findings and future presentations of your case study. Clients can provide statistics about usage of a new tool or product and participants can provide photos and quotes that show evidence of findings that may support the case.

• You can't include it all. So, you need to think about how to sort through it, take out the excess, and arrange it so that the situation at the case site will be understandable to your readers. Before you can do this, you have to put all the information together where you can see it and analyze what is going on.

• This will allow you to concentrate on what material is the most important. You're bound to receive information from participants that should be included, but solely on the periphery. Organize your material to mirror this.

Writing Your Piece

• The introduction should very clearly set the stage. In a detective story, the crime happens right at the beginning and the detective has to put together the information to solve it for the rest of the story. In a case, you can start by raising a question. You could quote someone you interviewed.
• Make sure to include background information on your study site, why your interviewees are a good sample, and what makes your problem pressing to give your audience a panoramic view of the issue. [2] X Research source After you've clearly stated the problem at hand, of course. [1] X Research source Include photos or a video if it would benefit your work to be persuasive and personalized.
• After the reader has all the knowledge needed to understand the problem, present your data. Include customer quotes and data (percentages, awards and findings) if possible to add a personal touch and more credibility to the case presented. Describe for the reader what you learned in your interviews about the problem at this site, how it developed, what solutions have already been proposed and/or tried, and feelings and thoughts of those working or visiting there. You may have to do calculations or extra research yourself to back up any claims.
• At the end of your analysis, you should offer possible solutions, but don't worry about solving the case itself. You may find referring to some interviewees' statements will do the alluding for you. Let the reader leave with a full grasp of the problem, but trying to come up with their own desire to change it. [1] X Research source Feel free to leave the reader with a question, forcing them to think for themselves. If you have written a good case, they will have enough information to understand the situation and have a lively class discussion.

• You may have terms that would be hard for other cultures to understand. If this is the case, include it in the appendix or in a Note for the Instructor .

• Go over your study section by section, but also as a whole. Each data point needs to fit into both it's place and the entirety of the work. If you can't find an appropriate place for something, stick it in the appendix.

• Have someone else proofread, too. Your mind may have become oblivious to the errors it has seen 100 times. Another set of eyes may also notice content that has been left open-ended or is otherwise confusing.

Expert Q&A

• If you are developing many case studies for the same purpose using the same general subjects, use a uniform template and/or design. Thanks Helpful 0 Not Helpful 0
• Be sure to ask open-ended questions while conducting interviews to foster a discussion. Thanks Helpful 0 Not Helpful 0
• Ask for permission to contact case study participants as you develop the written case study. You may discover that you need additional information as you analyze all data. Thanks Helpful 0 Not Helpful 0

You Might Also Like

Expert Interview

Thanks for reading our article! If you’d like to learn more about writing, check out our in-depth interview with Annaliese Dunne .

• ↑ 1.0 1.1 1.2 1.3 http://www.essayforum.com/grammar-usage-13/to-write-case-study-366/
• ↑ https://www.universalclass.com/articles/business/the-process-of-writing-a-case-study.htm
• http://writing.colostate.edu/guides/research/casestudy/pop2a.cfm Colorado State University Case Study writing guides
• http://www.hoffmanmarcom.com/casestudy/howtowrite.php Hoffman Marketing and Communications case study overview

About This Article

To write a case study, start with an introduction that defines key terms, outlines the problem your case study addresses, and gives necessary background information. You can also include photos or a video if they will help your work to be more persuasive. Then, present your findings from the case study and explain your methodology, including how you used your data to come to your conclusions. In your conclusion, offer possible solutions or next steps for research, based on your results. To learn how to select participants for your case study, keep reading. Did this summary help you? Yes No

• Send fan mail to authors

Reader Success Stories

Aaron Farrell

Jul 11, 2019

Did this article help you?

Sep 11, 2016

Sep 21, 2017

Dec 18, 2017

Mar 6, 2017

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

wikiHow Tech Help Pro:

Develop the tech skills you need for work and life

• Bipolar Disorder
• Therapy Center
• When To See a Therapist
• Types of Therapy
• Best Online Therapy
• Best Couples Therapy
• Best Family Therapy
• Managing Stress
• Sleep and Dreaming
• Understanding Emotions
• Self-Improvement
• Healthy Relationships
• Student Resources
• Personality Types
• Guided Meditations
• Verywell Mind Insights
• 2023 Verywell Mind 25
• Mental Health in the Classroom
• Editorial Process
• Meet Our Review Board
• Crisis Support

What Is a Case Study?

Weighing the pros and cons of this method of research

Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

Cara Lustik is a fact-checker and copywriter.

Verywell / Colleen Tighe

• Pros and Cons

What Types of Case Studies Are Out There?

Where do you find data for a case study, how do i write a psychology case study.

A case study is an in-depth study of one person, group, or event. In a case study, nearly every aspect of the subject's life and history is analyzed to seek patterns and causes of behavior. Case studies can be used in many different fields, including psychology, medicine, education, anthropology, political science, and social work.

The point of a case study is to learn as much as possible about an individual or group so that the information can be generalized to many others. Unfortunately, case studies tend to be highly subjective, and it is sometimes difficult to generalize results to a larger population.

While case studies focus on a single individual or group, they follow a format similar to other types of psychology writing. If you are writing a case study, we got you—here are some rules of APA format to reference.  

At a Glance

A case study, or an in-depth study of a person, group, or event, can be a useful research tool when used wisely. In many cases, case studies are best used in situations where it would be difficult or impossible for you to conduct an experiment. They are helpful for looking at unique situations and allow researchers to gather a lot of˜ information about a specific individual or group of people. However, it's important to be cautious of any bias we draw from them as they are highly subjective.

What Are the Benefits and Limitations of Case Studies?

A case study can have its strengths and weaknesses. Researchers must consider these pros and cons before deciding if this type of study is appropriate for their needs.

One of the greatest advantages of a case study is that it allows researchers to investigate things that are often difficult or impossible to replicate in a lab. Some other benefits of a case study:

• Allows researchers to capture information on the 'how,' 'what,' and 'why,' of something that's implemented
• Gives researchers the chance to collect information on why one strategy might be chosen over another
• Permits researchers to develop hypotheses that can be explored in experimental research

On the other hand, a case study can have some drawbacks:

• It cannot necessarily be generalized to the larger population
• Cannot demonstrate cause and effect
• It may not be scientifically rigorous
• It can lead to bias

Researchers may choose to perform a case study if they want to explore a unique or recently discovered phenomenon. Through their insights, researchers develop additional ideas and study questions that might be explored in future studies.

It's important to remember that the insights from case studies cannot be used to determine cause-and-effect relationships between variables. However, case studies may be used to develop hypotheses that can then be addressed in experimental research.

Case Study Examples

There have been a number of notable case studies in the history of psychology. Much of  Freud's work and theories were developed through individual case studies. Some great examples of case studies in psychology include:

• Anna O : Anna O. was a pseudonym of a woman named Bertha Pappenheim, a patient of a physician named Josef Breuer. While she was never a patient of Freud's, Freud and Breuer discussed her case extensively. The woman was experiencing symptoms of a condition that was then known as hysteria and found that talking about her problems helped relieve her symptoms. Her case played an important part in the development of talk therapy as an approach to mental health treatment.
• Phineas Gage : Phineas Gage was a railroad employee who experienced a terrible accident in which an explosion sent a metal rod through his skull, damaging important portions of his brain. Gage recovered from his accident but was left with serious changes in both personality and behavior.
• Genie : Genie was a young girl subjected to horrific abuse and isolation. The case study of Genie allowed researchers to study whether language learning was possible, even after missing critical periods for language development. Her case also served as an example of how scientific research may interfere with treatment and lead to further abuse of vulnerable individuals.

Such cases demonstrate how case research can be used to study things that researchers could not replicate in experimental settings. In Genie's case, her horrific abuse denied her the opportunity to learn a language at critical points in her development.

This is clearly not something researchers could ethically replicate, but conducting a case study on Genie allowed researchers to study phenomena that are otherwise impossible to reproduce.

There are a few different types of case studies that psychologists and other researchers might use:

• Collective case studies : These involve studying a group of individuals. Researchers might study a group of people in a certain setting or look at an entire community. For example, psychologists might explore how access to resources in a community has affected the collective mental well-being of those who live there.
• Descriptive case studies : These involve starting with a descriptive theory. The subjects are then observed, and the information gathered is compared to the pre-existing theory.
• Explanatory case studies : These   are often used to do causal investigations. In other words, researchers are interested in looking at factors that may have caused certain things to occur.
• Exploratory case studies : These are sometimes used as a prelude to further, more in-depth research. This allows researchers to gather more information before developing their research questions and hypotheses .
• Instrumental case studies : These occur when the individual or group allows researchers to understand more than what is initially obvious to observers.
• Intrinsic case studies : This type of case study is when the researcher has a personal interest in the case. Jean Piaget's observations of his own children are good examples of how an intrinsic case study can contribute to the development of a psychological theory.

The three main case study types often used are intrinsic, instrumental, and collective. Intrinsic case studies are useful for learning about unique cases. Instrumental case studies help look at an individual to learn more about a broader issue. A collective case study can be useful for looking at several cases simultaneously.

The type of case study that psychology researchers use depends on the unique characteristics of the situation and the case itself.

There are a number of different sources and methods that researchers can use to gather information about an individual or group. Six major sources that have been identified by researchers are:

• Archival records : Census records, survey records, and name lists are examples of archival records.
• Direct observation : This strategy involves observing the subject, often in a natural setting . While an individual observer is sometimes used, it is more common to utilize a group of observers.
• Documents : Letters, newspaper articles, administrative records, etc., are the types of documents often used as sources.
• Interviews : Interviews are one of the most important methods for gathering information in case studies. An interview can involve structured survey questions or more open-ended questions.
• Participant observation : When the researcher serves as a participant in events and observes the actions and outcomes, it is called participant observation.
• Physical artifacts : Tools, objects, instruments, and other artifacts are often observed during a direct observation of the subject.

If you have been directed to write a case study for a psychology course, be sure to check with your instructor for any specific guidelines you need to follow. If you are writing your case study for a professional publication, check with the publisher for their specific guidelines for submitting a case study.

Here is a general outline of what should be included in a case study.

Section 1: A Case History

This section will have the following structure and content:

Background information : The first section of your paper will present your client's background. Include factors such as age, gender, work, health status, family mental health history, family and social relationships, drug and alcohol history, life difficulties, goals, and coping skills and weaknesses.

Description of the presenting problem : In the next section of your case study, you will describe the problem or symptoms that the client presented with.

Describe any physical, emotional, or sensory symptoms reported by the client. Thoughts, feelings, and perceptions related to the symptoms should also be noted. Any screening or diagnostic assessments that are used should also be described in detail and all scores reported.

Your diagnosis : Provide your diagnosis and give the appropriate Diagnostic and Statistical Manual code. Explain how you reached your diagnosis, how the client's symptoms fit the diagnostic criteria for the disorder(s), or any possible difficulties in reaching a diagnosis.

Section 2: Treatment Plan

This portion of the paper will address the chosen treatment for the condition. This might also include the theoretical basis for the chosen treatment or any other evidence that might exist to support why this approach was chosen.

• Cognitive behavioral approach : Explain how a cognitive behavioral therapist would approach treatment. Offer background information on cognitive behavioral therapy and describe the treatment sessions, client response, and outcome of this type of treatment. Make note of any difficulties or successes encountered by your client during treatment.
• Humanistic approach : Describe a humanistic approach that could be used to treat your client, such as client-centered therapy . Provide information on the type of treatment you chose, the client's reaction to the treatment, and the end result of this approach. Explain why the treatment was successful or unsuccessful.
• Psychoanalytic approach : Describe how a psychoanalytic therapist would view the client's problem. Provide some background on the psychoanalytic approach and cite relevant references. Explain how psychoanalytic therapy would be used to treat the client, how the client would respond to therapy, and the effectiveness of this treatment approach.
• Pharmacological approach : If treatment primarily involves the use of medications, explain which medications were used and why. Provide background on the effectiveness of these medications and how monotherapy may compare with an approach that combines medications with therapy or other treatments.

This section of a case study should also include information about the treatment goals, process, and outcomes.

When you are writing a case study, you should also include a section where you discuss the case study itself, including the strengths and limitiations of the study. You should note how the findings of your case study might support previous research. 

In your discussion section, you should also describe some of the implications of your case study. What ideas or findings might require further exploration? How might researchers go about exploring some of these questions in additional studies?

Need More Tips?

Here are a few additional pointers to keep in mind when formatting your case study:

• Never refer to the subject of your case study as "the client." Instead, use their name or a pseudonym.
• Read examples of case studies to gain an idea about the style and format.
• Remember to use APA format when citing references .

Crowe S, Cresswell K, Robertson A, Huby G, Avery A, Sheikh A. The case study approach .  BMC Med Res Methodol . 2011;11:100.

Crowe S, Cresswell K, Robertson A, Huby G, Avery A, Sheikh A. The case study approach . BMC Med Res Methodol . 2011 Jun 27;11:100. doi:10.1186/1471-2288-11-100

Gagnon, Yves-Chantal.  The Case Study as Research Method: A Practical Handbook . Canada, Chicago Review Press Incorporated DBA Independent Pub Group, 2010.

Yin, Robert K. Case Study Research and Applications: Design and Methods . United States, SAGE Publications, 2017.

By Kendra Cherry, MSEd Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

Home Blog Business How to Present a Case Study: Examples and Best Practices

How to Present a Case Study: Examples and Best Practices

Marketers, consultants, salespeople, and all other types of business managers often use case study analysis to highlight a success story, showing how an exciting problem can be or was addressed. But how do you create a compelling case study and then turn it into a memorable presentation? Get a lowdown from this post! 

Table of Content s

• Why Case Studies are a Popular Marketing Technique 

Popular Case Study Format Types

How to write a case study: a 4-step framework, how to do a case study presentation: 3 proven tips, how long should a case study be, final tip: use compelling presentation visuals, business case study examples, what is a case study .

Let’s start with this great case study definition by the University of South Caroline:

In the social sciences, the term case study refers to both a method of analysis and a specific research design for examining a problem, both of which can generalize findings across populations.

In simpler terms — a case study is investigative research into a problem aimed at presenting or highlighting solution(s) to the analyzed issues.

A standard business case study provides insights into:

• General business/market conditions 
• The main problem faced 
• Methods applied 
• The outcomes gained using a specific tool or approach

Case studies (also called case reports) are also used in clinical settings to analyze patient outcomes outside of the business realm. 

But this is a topic for another time. In this post, we’ll focus on teaching you how to write and present a business case, plus share several case study PowerPoint templates and design tips! 

Why Case Studies are a Popular Marketing Technique 

Besides presenting a solution to an internal issue, case studies are often used as a content marketing technique . According to a 2020 Content Marketing Institute report, 69% of B2B marketers use case studies as part of their marketing mix.

A case study informs the reader about a possible solution and soft-sells the results, which can be achieved with your help (e.g., by using your software or by partnering with your specialist). 

For the above purpose, case studies work like a charm. Per the same report: 

• For 9% of marketers, case studies are also the best method for nurturing leads. 
• 23% admit that case studies are beneficial for improving conversions. 

Moreover, case studies also help improve your brand’s credibility, especially in the current fake news landscape and dubious claims made without proper credit. 

Ultimately, case studies naturally help build up more compelling, relatable stories and showcase your product benefits through the prism of extra social proof, courtesy of the case study subject. 

Most case studies come either as a slide deck or as a downloadable PDF document. 

Typically, you have several options to distribute your case study for maximum reach:

• Case study presentations — in-person, virtual, or pre-recorded, there are many times when a case study presentation comes in handy. For example, during client workshops, sales pitches, networking events, conferences, trade shows, etc. 
• Dedicated website page — highlighting case study examples on your website is a great way to convert middle-on-the-funnel prospects. Google’s Think With Google case study section is a great example of a web case study design done right.

• Blog case studies — data-driven storytelling is a staunch way to stand apart from your competition by providing unique insights, no other brand can tell. 
• Video case studies — video is a great medium for showcasing more complex business cases and celebrating customer success stories.

Once you decide on your case study format, the next step is collecting data and then translating it into a storyline. There are different case study methods and research approaches you can use to procure data. 

But let’s say you already have all your facts straight and need to organize them in a clean copy for your presentation deck. Here’s how you should do it. 

1. Identify the Problem 

Every compelling case study research starts with a problem statement definition. While in business settings, there’s no need to explain your methodology in-depth; you should still open your presentation with a quick problem recap slide.

Be sure to mention: 

• What’s the purpose of the case study? What will the audience learn? 
• Set the scene. Explain the before, aka the problems someone was facing. 
• Advertise the main issues and findings without highlighting specific details.

The above information should nicely fit in several paragraphs or 2-3 case study template slides

2. Explain the Solution 

The bulk of your case study copy and presentation slides should focus on the provided solution(s). This is the time to speak at length about how the subject went from before to the glorious after. 

Here are some writing prompts to help you articulate this better:

• State the subject’s main objective and goals. What outcomes were they after?
• Explain the main solution(s) provided. What was done? Why this, but not that? 
• Mention if they tried any alternatives. Why did those work? Why were you better?

This part may take the longest to write. Don’t rush it and reiterate several times. Sprinkle in some powerful words and catchphrases to make your copy more compelling.

3. Collect Testimonials 

Persuasive case studies feature the voice of customer (VoC) data — first-party testimonials and assessments of how well the solution works. These provide extra social proof and credibility to all the claims you are making. 

So plan and schedule interviews with your subjects to collect their input and testimonials. Also, design your case study interview questions in a way that lets you obtain quantifiable results.

4. Package The Information in a Slide Deck

Once you have a rough first draft, try different business case templates and designs to see how these help structure all the available information. 

As a rule of thumb, try to keep one big idea per slide. If you are talking about a solution, first present the general bullet points. Then give each solution a separate slide where you’ll provide more context and perhaps share some quantifiable results.

For example, if you look at case study presentation examples from AWS like this one about Stripe , you’ll notice that the slide deck has few texts and really focuses on the big picture, while the speaker provides extra context.

Need some extra case study presentation design help? Download our Business Case Study PowerPoint template with 100% editable slides. 

Your spoken presentation (and public speaking skills ) are equally if not more important than the case study copy and slide deck. To make a strong business case, follow these quick techniques. 

Focus on Telling a Great Story

A case study is a story of overcoming a challenge, and achieving something grand. Your delivery should reflect that. Step away from the standard “features => benefits” sales formula. Instead, make your customer the hero of the study. Describe the road they went through and how you’ve helped them succeed. 

The premises of your story can be as simple as:

• Help with overcoming a hurdle
• Gaining major impact
• Reaching a new milestone
• Solving a persisting issue no one else code 

Based on the above, create a clear story arc. Show where your hero started. Then explain what type of journey they went through. Inject some emotions into the mix to make your narrative more relatable and memorable. 

Experiment with Copywriting Formulas 

Copywriting is the art and science of organizing words into compelling and persuasive combinations that help readers retain the right ideas. 

To ensure that the audience retains the right takeaways from your case study presentation, you can try using some of the classic copywriting formulas to structure your delivery. These include:

• AIDCA — short for A ttention, I nterest, D esire, C onviction, and A ction. First, grab the audience’s attention by addressing the major problem. Next, pique their interest with some teaser facts. Spark their desire by showing that you know the right way out. Then, show a conviction that you know how to solve the issue—finally, prompt follow-up action such as contacting you to learn more. 
• PADS — is short for Problem, Agitation, Discredit, or Solution. This is more of a sales approach to case study narration. Again, you start with a problem, agitate about its importance, discredit why other solutions won’t cut it, and then present your option. 
• 4Ps — short for P roblem, P romise, P roof, P roposal. This is a middle-ground option that prioritizes storytelling over hard pitches. Set the scene first with a problem. Then make a promise of how you can solve it. Show proof in the form of numbers, testimonials, and different scenarios. Round it up with a proposal for getting the same outcomes. 

Take an Emotion-Inducing Perspective

The key to building a strong rapport with an audience is showing that you are one of them and fully understand what they are going through. 

One of the ways to build this connection is by speaking from an emotion-inducing perspective. This is best illustrated with an example: 

• A business owner went to the bank
• A business owner came into a bank branch 

In the second case, the wording prompts listeners to paint a mental picture from the perspective of the bank employees — a role you’d like them to relate to. By placing your audience in the right visual perspective, you can make them more receptive to your pitches. 

One common question that arises when creating a case study is determining its length. The length of a case study can vary depending on the complexity of the problem and the level of detail you want to provide. Here are some general guidelines to help you decide how long your case study should be:

• Concise and Informative: A good case study should be concise and to the point. Avoid unnecessary fluff and filler content. Focus on providing valuable information and insights.
• Tailor to Your Audience: Consider your target audience when deciding the length. If you’re presenting to a technical audience, you might include more in-depth technical details. For a non-technical audience, keep it more high-level and accessible.
• Cover Key Points: Ensure that your case study covers the key points effectively. These include the problem statement, the solution, and the outcomes. Provide enough information for the reader to understand the context and the significance of your case.
• Visuals: Visual elements such as charts, graphs, images, and diagrams can help convey information more effectively. Use visuals to supplement your written content and make complex information easier to understand.
• Engagement: Keep your audience engaged. A case study that is too long may lose the reader’s interest. Make sure the content is engaging and holds the reader’s attention throughout.
• Consider the Format: Depending on the format you choose (e.g., written document, presentation, video), the ideal length may vary. For written case studies, aim for a length that can be easily read in one sitting.

In general, a written case study for business purposes often falls in the range of 1,000 to 2,000 words. However, this is not a strict rule, and the length can be shorter or longer based on the factors mentioned above.

Our brain is wired to process images much faster than text. So when you are presenting a case study, always look for an opportunity to tie in some illustrations such as: 

• A product demo/preview
• Processes chart 
• Call-out quotes or numbers
• Custom illustrations or graphics 
• Customer or team headshots 

Use icons to minimize the volume of text. Also, opt for readable fonts that can look good in a smaller size too.

To better understand how to create an effective business case study, let’s explore some examples of successful case studies:

Apple Inc.: Apple’s case study on the launch of the iPhone is a classic example. It covers the problem of a changing mobile phone market, the innovative solution (the iPhone), and the outstanding outcomes, such as market dominance and increased revenue.

Tesla, Inc.: Tesla’s case study on electric vehicles and sustainable transportation is another compelling example. It addresses the problem of environmental concerns and the need for sustainable transportation solutions. The case study highlights Tesla’s electric cars as the solution and showcases the positive impact on reducing carbon emissions.

Amazon.com: Amazon’s case study on customer-centricity is a great illustration of how the company transformed the e-commerce industry. It discusses the problem of customer dissatisfaction with traditional retail, Amazon’s customer-focused approach as the solution, and the remarkable outcomes in terms of customer loyalty and market growth.

Coca-Cola: Coca-Cola’s case study on brand evolution is a valuable example. It outlines the challenge of adapting to changing consumer preferences and demographics. The case study demonstrates how Coca-Cola continually reinvented its brand to stay relevant and succeed in the global market.

Airbnb: Airbnb’s case study on the sharing economy is an intriguing example. It addresses the problem of travelers seeking unique and affordable accommodations. The case study presents Airbnb’s platform as the solution and highlights its impact on the hospitality industry and the sharing economy.

These examples showcase the diversity of case studies in the business world and how they effectively communicate problems, solutions, and outcomes. When creating your own business case study, use these examples as inspiration and tailor your approach to your specific industry and target audience.

Finally, practice your case study presentation several times — solo and together with your team — to collect feedback and make last-minute refinements! 

1. Business Case Study PowerPoint Template

To efficiently create a Business Case Study it’s important to ask all the right questions and document everything necessary, therefore this PowerPoint Template will provide all the sections you need.

Use This Template

2. Medical Case Study PowerPoint Template

3. Medical Infographics PowerPoint Templates

4. Success Story PowerPoint Template

5. Detective Research PowerPoint Template

6. Animated Clinical Study PowerPoint Templates

Like this article? Please share

Business Intelligence, Business Planning, Business PowerPoint Templates, Content Marketing, Feasibility Study, Marketing, Marketing Strategy Filed under Business

Related Articles

Filed under Business • February 2nd, 2024

Business Plan Presentations: A Guide

Learn all that’s required to produce a high-quality business plan presentation in this guide. Suggested templates and examples are included.

Filed under Business • January 16th, 2024

The OODA Loop Decision-Making Model and How to Use it for Presentations

OODA Loop is a model that supports people and companies when defining important decisions in teams or individuals. See here how to apply it in presentation slide design.

Filed under Design • December 1st, 2023

Best 23 PowerPoint Templates to Start 202

2023 is around the corner, and for that very reason we want to list a selection of PowerPoint templates to start your projects in style.

Leave a Reply

We use essential cookies to make Venngage work. By clicking “Accept All Cookies”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Manage Cookies

Cookies and similar technologies collect certain information about how you’re using our website. Some of them are essential, and without them you wouldn’t be able to use Venngage. But others are optional, and you get to choose whether we use them or not.

Strictly Necessary Cookies

These cookies are always on, as they’re essential for making Venngage work, and making it safe. Without these cookies, services you’ve asked for can’t be provided.

Show cookie providers

• Google Login

Functionality Cookies

These cookies help us provide enhanced functionality and personalisation, and remember your settings. They may be set by us or by third party providers.

Performance Cookies

These cookies help us analyze how many people are using Venngage, where they come from and how they're using it. If you opt out of these cookies, we can’t get feedback to make Venngage better for you and all our users.

• Google Analytics

Targeting Cookies

These cookies are set by our advertising partners to track your activity and show you relevant Venngage ads on other sites as you browse the internet.

• Google Tag Manager
• Infographics
• Daily Infographics
• Template Lists
• Graphic Design
• Graphs and Charts
• Data Visualization
• Human Resources
• Beginner Guides

Blog Business

How to Present a Case Study like a Pro (With Examples)

By Danesh Ramuthi , Sep 07, 2023

Okay, let’s get real: case studies can be kinda snooze-worthy. But guess what? They don’t have to be!

In this article, I will cover every element that transforms a mere report into a compelling case study, from selecting the right metrics to using persuasive narrative techniques.

And if you’re feeling a little lost, don’t worry! There are cool tools like Venngage’s Case Study Creator to help you whip up something awesome, even if you’re short on time. Plus, the pre-designed case study templates are like instant polish because let’s be honest, everyone loves a shortcut.

Click to jump ahead: 

What is a case study presentation?

What is the purpose of presenting a case study, how to structure a case study presentation, how long should a case study presentation be, 5 case study presentation examples with templates, 6 tips for delivering an effective case study presentation, 5 common mistakes to avoid in a case study presentation, how to present a case study faqs.

A case study presentation involves a comprehensive examination of a specific subject, which could range from an individual, group, location, event, organization or phenomenon.

They’re like puzzles you get to solve with the audience, all while making you think outside the box.

Unlike a basic report or whitepaper, the purpose of a case study presentation is to stimulate critical thinking among the viewers. 

The primary objective of a case study is to provide an extensive and profound comprehension of the chosen topic. You don’t just throw numbers at your audience. You use examples and real-life cases to make you think and see things from different angles.

The primary purpose of presenting a case study is to offer a comprehensive, evidence-based argument that informs, persuades and engages your audience.

Here’s the juicy part: presenting that case study can be your secret weapon. Whether you’re pitching a groundbreaking idea to a room full of suits or trying to impress your professor with your A-game, a well-crafted case study can be the magic dust that sprinkles brilliance over your words.

Think of it like digging into a puzzle you can’t quite crack . A case study lets you explore every piece, turn it over and see how it fits together. This close-up look helps you understand the whole picture, not just a blurry snapshot.

It’s also your chance to showcase how you analyze things, step by step, until you reach a conclusion. It’s all about being open and honest about how you got there.

Besides, presenting a case study gives you an opportunity to connect data and real-world scenarios in a compelling narrative. It helps to make your argument more relatable and accessible, increasing its impact on your audience.

One of the contexts where case studies can be very helpful is during the job interview. In some job interviews, you as candidates may be asked to present a case study as part of the selection process.

Having a case study presentation prepared allows the candidate to demonstrate their ability to understand complex issues, formulate strategies and communicate their ideas effectively.

The way you present a case study can make all the difference in how it’s received. A well-structured presentation not only holds the attention of your audience but also ensures that your key points are communicated clearly and effectively.

In this section, let’s go through the key steps that’ll help you structure your case study presentation for maximum impact.

Let’s get into it. 

Open with an introductory overview 

Start by introducing the subject of your case study and its relevance. Explain why this case study is important and who would benefit from the insights gained. This is your opportunity to grab your audience’s attention.

Explain the problem in question

Dive into the problem or challenge that the case study focuses on. Provide enough background information for the audience to understand the issue. If possible, quantify the problem using data or metrics to show the magnitude or severity.

Detail the solutions to solve the problem

After outlining the problem, describe the steps taken to find a solution. This could include the methodology, any experiments or tests performed and the options that were considered. Make sure to elaborate on why the final solution was chosen over the others.

Key stakeholders Involved

Talk about the individuals, groups or organizations that were directly impacted by or involved in the problem and its solution. 

Stakeholders may experience a range of outcomes—some may benefit, while others could face setbacks.

For example, in a business transformation case study, employees could face job relocations or changes in work culture, while shareholders might be looking at potential gains or losses.

Discuss the key results & outcomes

Discuss the results of implementing the solution. Use data and metrics to back up your statements. Did the solution meet its objectives? What impact did it have on the stakeholders? Be honest about any setbacks or areas for improvement as well.

Include visuals to support your analysis

Visual aids can be incredibly effective in helping your audience grasp complex issues. Utilize charts, graphs, images or video clips to supplement your points. Make sure to explain each visual and how it contributes to your overall argument.

Pie charts illustrate the proportion of different components within a whole, useful for visualizing market share, budget allocation or user demographics.

This is particularly useful especially if you’re displaying survey results in your case study presentation.

Stacked charts on the other hand are perfect for visualizing composition and trends. This is great for analyzing things like customer demographics, product breakdowns or budget allocation in your case study.

Consider this example of a stacked bar chart template. It provides a straightforward summary of the top-selling cake flavors across various locations, offering a quick and comprehensive view of the data.

Not the chart you’re looking for? Browse Venngage’s gallery of chart templates to find the perfect one that’ll captivate your audience and level up your data storytelling.

Recommendations and next steps

Wrap up by providing recommendations based on the case study findings. Outline the next steps that stakeholders should take to either expand on the success of the project or address any remaining challenges.

Acknowledgments and references

Thank the people who contributed to the case study and helped in the problem-solving process. Cite any external resources, reports or data sets that contributed to your analysis.

Feedback & Q&A session

Open the floor for questions and feedback from your audience. This allows for further discussion and can provide additional insights that may not have been considered previously.

Closing remarks

Conclude the presentation by summarizing the key points and emphasizing the takeaways. Thank your audience for their time and participation and express your willingness to engage in further discussions or collaborations on the subject.

Well, the length of a case study presentation can vary depending on the complexity of the topic and the needs of your audience. However, a typical business or academic presentation often lasts between 15 to 30 minutes. 

This time frame usually allows for a thorough explanation of the case while maintaining audience engagement. However, always consider leaving a few minutes at the end for a Q&A session to address any questions or clarify points made during the presentation.

When it comes to presenting a compelling case study, having a well-structured template can be a game-changer. 

It helps you organize your thoughts, data and findings in a coherent and visually pleasing manner. 

Not all case studies are created equal and different scenarios require distinct approaches for maximum impact. 

To save you time and effort, I have curated a list of 5 versatile case study presentation templates, each designed for specific needs and audiences. 

Here are some best case study presentation examples that showcase effective strategies for engaging your audience and conveying complex information clearly.

1 . Lab report case study template

Ever feel like your research gets lost in a world of endless numbers and jargon? Lab case studies are your way out!

Think of it as building a bridge between your cool experiment and everyone else. It’s more than just reporting results – it’s explaining the “why” and “how” in a way that grabs attention and makes sense.

This lap report template acts as a blueprint for your report, guiding you through each essential section (introduction, methods, results, etc.) in a logical order.

Want to present your research like a pro? Browse our research presentation template gallery for creative inspiration!

2. Product case study template

It’s time you ditch those boring slideshows and bullet points because I’ve got a better way to win over clients: product case study templates.

Instead of just listing features and benefits, you get to create a clear and concise story that shows potential clients exactly what your product can do for them. It’s like painting a picture they can easily visualize, helping them understand the value your product brings to the table.

Grab the template below, fill in the details, and watch as your product’s impact comes to life!

3. Content marketing case study template

In digital marketing, showcasing your accomplishments is as vital as achieving them. 

A well-crafted case study not only acts as a testament to your successes but can also serve as an instructional tool for others. 

With this coral content marketing case study template—a perfect blend of vibrant design and structured documentation, you can narrate your marketing triumphs effectively.

4. Case study psychology template

Understanding how people tick is one of psychology’s biggest quests and case studies are like magnifying glasses for the mind. They offer in-depth looks at real-life behaviors, emotions and thought processes, revealing fascinating insights into what makes us human.

Writing a top-notch case study, though, can be a challenge. It requires careful organization, clear presentation and meticulous attention to detail. That’s where a good case study psychology template comes in handy.

Think of it as a helpful guide, taking care of formatting and structure while you focus on the juicy content. No more wrestling with layouts or margins – just pour your research magic into crafting a compelling narrative.

5. Lead generation case study template

Lead generation can be a real head-scratcher. But here’s a little help: a lead generation case study.

Think of it like a friendly handshake and a confident resume all rolled into one. It’s your chance to showcase your expertise, share real-world successes and offer valuable insights. Potential clients get to see your track record, understand your approach and decide if you’re the right fit.

No need to start from scratch, though. This lead generation case study template guides you step-by-step through crafting a clear, compelling narrative that highlights your wins and offers actionable tips for others. Fill in the gaps with your specific data and strategies, and voilà! You’ve got a powerful tool to attract new customers.

Related: 15+ Professional Case Study Examples [Design Tips + Templates]

So, you’ve spent hours crafting the perfect case study and are now tasked with presenting it. Crafting the case study is only half the battle; delivering it effectively is equally important. 

Whether you’re facing a room of executives, academics or potential clients, how you present your findings can make a significant difference in how your work is received. 

Forget boring reports and snooze-inducing presentations! Let’s make your case study sing. Here are some key pointers to turn information into an engaging and persuasive performance:

• Know your audience : Tailor your presentation to the knowledge level and interests of your audience. Remember to use language and examples that resonate with them.
• Rehearse : Rehearsing your case study presentation is the key to a smooth delivery and for ensuring that you stay within the allotted time. Practice helps you fine-tune your pacing, hone your speaking skills with good word pronunciations and become comfortable with the material, leading to a more confident, conversational and effective presentation.
• Start strong : Open with a compelling introduction that grabs your audience’s attention. You might want to use an interesting statistic, a provocative question or a brief story that sets the stage for your case study.
• Be clear and concise : Avoid jargon and overly complex sentences. Get to the point quickly and stay focused on your objectives.
• Use visual aids : Incorporate slides with graphics, charts or videos to supplement your verbal presentation. Make sure they are easy to read and understand.
• Tell a story : Use storytelling techniques to make the case study more engaging. A well-told narrative can help you make complex data more relatable and easier to digest.

Ditching the dry reports and slide decks? Venngage’s case study templates let you wow customers with your solutions and gain insights to improve your business plan. Pre-built templates, visual magic and customer captivation – all just a click away. Go tell your story and watch them say “wow!”

Nailed your case study, but want to make your presentation even stronger? Avoid these common mistakes to ensure your audience gets the most out of it:

Overloading with information

A case study is not an encyclopedia. Overloading your presentation with excessive data, text or jargon can make it cumbersome and difficult for the audience to digest the key points. Stick to what’s essential and impactful. Need help making your data clear and impactful? Our data presentation templates can help! Find clear and engaging visuals to showcase your findings.

Lack of structure

Jumping haphazardly between points or topics can confuse your audience. A well-structured presentation, with a logical flow from introduction to conclusion, is crucial for effective communication.

Ignoring the audience

Different audiences have different needs and levels of understanding. Failing to adapt your presentation to your audience can result in a disconnect and a less impactful presentation.

Poor visual elements

While content is king, poor design or lack of visual elements can make your case study dull or hard to follow. Make sure you use high-quality images, graphs and other visual aids to support your narrative.

Not focusing on results

A case study aims to showcase a problem and its solution, but what most people care about are the results. Failing to highlight or adequately explain the outcomes can make your presentation fall flat.

How to start a case study presentation?

Starting a case study presentation effectively involves a few key steps:

• Grab attention : Open with a hook—an intriguing statistic, a provocative question or a compelling visual—to engage your audience from the get-go.
• Set the stage : Briefly introduce the subject, context and relevance of the case study to give your audience an idea of what to expect.
• Outline objectives : Clearly state what the case study aims to achieve. Are you solving a problem, proving a point or showcasing a success?
• Agenda : Give a quick outline of the key sections or topics you’ll cover to help the audience follow along.
• Set expectations : Let your audience know what you want them to take away from the presentation, whether it’s knowledge, inspiration or a call to action.

How to present a case study on PowerPoint and on Google Slides?

Presenting a case study on PowerPoint and Google Slides involves a structured approach for clarity and impact using presentation slides :

• Title slide : Start with a title slide that includes the name of the case study, your name and any relevant institutional affiliations.
• Introduction : Follow with a slide that outlines the problem or situation your case study addresses. Include a hook to engage the audience.
• Objectives : Clearly state the goals of the case study in a dedicated slide.
• Findings : Use charts, graphs and bullet points to present your findings succinctly.
• Analysis : Discuss what the findings mean, drawing on supporting data or secondary research as necessary.
• Conclusion : Summarize key takeaways and results.
• Q&A : End with a slide inviting questions from the audience.

What’s the role of analysis in a case study presentation?

The role of analysis in a case study presentation is to interpret the data and findings, providing context and meaning to them. 

It helps your audience understand the implications of the case study, connects the dots between the problem and the solution and may offer recommendations for future action.

Is it important to include real data and results in the presentation?

Yes, including real data and results in a case study presentation is crucial to show experience,  credibility and impact. Authentic data lends weight to your findings and conclusions, enabling the audience to trust your analysis and take your recommendations more seriously

How do I conclude a case study presentation effectively?

To conclude a case study presentation effectively, summarize the key findings, insights and recommendations in a clear and concise manner. 

End with a strong call-to-action or a thought-provoking question to leave a lasting impression on your audience.

What’s the best way to showcase data in a case study presentation ?

The best way to showcase data in a case study presentation is through visual aids like charts, graphs and infographics which make complex information easily digestible, engaging and creative. 

Don’t just report results, visualize them! This template for example lets you transform your social media case study into a captivating infographic that sparks conversation.

Choose the type of visual that best represents the data you’re showing; for example, use bar charts for comparisons or pie charts for parts of a whole. 

Ensure that the visuals are high-quality and clearly labeled, so the audience can quickly grasp the key points. 

Keep the design consistent and simple, avoiding clutter or overly complex visuals that could distract from the message.

Choose a template that perfectly suits your case study where you can utilize different visual aids for maximum impact. 

Need more inspiration on how to turn numbers into impact with the help of infographics? Our ready-to-use infographic templates take the guesswork out of creating visual impact for your case studies with just a few clicks.

Related: 10+ Case Study Infographic Templates That Convert

Congrats on mastering the art of compelling case study presentations! This guide has equipped you with all the essentials, from structure and nuances to avoiding common pitfalls. You’re ready to impress any audience, whether in the boardroom, the classroom or beyond.

And remember, you’re not alone in this journey. Venngage’s Case Study Creator is your trusty companion, ready to elevate your presentations from ordinary to extraordinary. So, let your confidence shine, leverage your newly acquired skills and prepare to deliver presentations that truly resonate.

Go forth and make a lasting impact!

What to Include in a Case Study: Layout, Content & Visuals

Learn what info to include in a business case study and how to structure it for maximum conversion, and see real-life examples and templates.

Dominika Krukowska

9 minute read

Short answer

What to include in a case study?

A successful case study should include the following elements:

• Introduction (what was the problem and how it was solved in 1-2 sentences)
• Client overview
• The problem or challenge
• How they solved their problem (with your solution)
• Customer quotes and testimonials

For a case study to work all critical components must be in place.

Case studies can be gold mines for conversions, but extracting that gold isn't as straightforward as it seems.

What goes into a case study that tells a compelling story and draws your prospects down the conversion funnel?

There are some critical elements that you must include in your case study if you hope to generate conversions.

Yes, you read that right— making a partial case study could very well mean leaving money on the table.

In this post, I’ll share with you the secrets to creating a case study that’ll turn it from ‘blah’ to ‘bingo’.

You’ll learn what you must include in your case study to convert readers into buyers.

Let’s go!

What to include in your case study structure?

Crafting your case study is like writing a gripping novel, filled with characters, conflicts, and resolutions. Each component of your case study serves a unique purpose in narrating the story of how your product or service helps your clients conquer their challenges.

Here are the main chapters of your case study structure:

1. Introduction

Think of the introduction as your story's opening scene. It's your first impression, your initial hook, the gateway to the world you're about to unfold. Here, you aim to spark curiosity and give your reader a taste of the journey ahead.

How to create an introduction slide:

Include a video —this will get 32% more people to interact with your case study .

Create an opening line that instantly hooks your reader —think surprising statistics, bold statements, or intriguing questions.

Introduce the central theme of your case study —what's the big challenge or opportunity at play?

Connect with the reader's pain points to foster engagement right from the start.

Here’s an example of an introduction slide that hooks attention:

2. Company overview

Here, you introduce your main hero—your client. You want to provide a clear and relatable backdrop that helps your audience understand who your client is, what they do, and what stakes are at play for them.

How to create a company overview slide:

Offer key details about the client's business —what's their industry? What's their market position?

Highlight the client's aspirations and values —this helps to humanize the company and build emotional connection.

Make sure to relate the company's context back to your reader. How does this company's situation reflect the challenges or opportunities your reader might face?

Here’s an example of a company overview slide:

3. The problem or challenge

This is the conflict that propels your story. It's the mountain your client needs to climb, the dragon they must slay. Without a significant problem or challenge, there's no tension, and without tension, there's no story and no engagement.

How to create a problem slide:

Clearly articulate the problem or challenge. Make it tangible and relatable.

Explore the implications of this problem. What's at stake for the client if it goes unresolved?

Aim to evoke emotion here. The more your reader feels the weight of the problem, the more invested they'll be in the solution.

Here’s an example of a problem slide:

4. Your solution

Enter the trusted guide and confidant—your product or service. This is the pivotal moment where your client's fortunes begin to turn. Show how your offering comes into play, lighting the way toward resolution.

How to create a solution slide:

Detail how your solution addresses the client's problem. Show how the features of your product or service connect to the challenges at hand.

Walk your reader through the implementation process. Offer insights into the collaborative efforts and innovative approaches that made the difference.

Don’t shy away from any obstacles or setbacks that occurred during the solution phase. Showing how you overcame these can actually make your story more credible and relatable.

Here’s an example of a solution slide:

This is the climax of your story, where all the tension that's been built up finally gets released. You need to demonstrate the transformation that occurred as a result of your solution.

How to create a results slide:

Show, don't tell. Use numbers, stats, and graphs to make your results concrete and impactful.

Discuss not just quantitative, but also qualitative results. How did your solution affect the client's morale, their customer satisfaction, their market reputation? Give detailed examples set in short anecdotes as experienced by a person (not an organization).

A side-by-side comparison of the 'before' and 'after' can be a powerful visual aid to highlight your impact.

Here’s an example of a results slide:

6. Customer quotes/testimonials

Nothing reinforces a story better than having the hero vouch for its authenticity. Direct quotes from your client add depth, credibility, and emotional resonance to your case study.

How to create a testimonials slide:

Select quotes that reinforce the narrative of your case study.

The more genuine and heartfelt, the better. Authenticity speaks volumes.

Consider sprinkling testimonials throughout the case study rather than bunching them together to keep the reader engaged.

Here’s an example of a testimonials slide:

7. Next steps

Your story doesn’t end when the problem is solved. This is where you guide your reader toward the future, inspiring them to take action based on the journey they've just been through.

How to create a next steps slide:

Provide clear and compelling calls-to-action. What do you want the reader to do next? Download a whitepaper? Request a demo? Sign up and try your solution? Make it a small concession, not a big ask. The next reasonable action they can take to establish the relationship a tiny bit further.

Make it simple for readers to take the next step. Include links, contact information, or even embed your calendar into the case study.

Here’s an example of a next steps slide:

What storytelling elements to include in a case study?

Compelling storytelling is an art, and when applied to business case studies, it can turn a rather dry piece of data into a riveting tale of success.

It's a chance to illustrate your value proposition in the real world, giving prospective clients a peek at what they could experience when they choose to work with you.

Here are some storytelling elements to include in your case study:

1. A clear storyline

Start with the basics: Who is your customer? What was their challenge? How did your product or service solve their problem? And, what was the outcome?

This forms the narrative arc of your case study, providing a backbone for your story. Ensure it’s a seamless narrative, taking the reader along a journey of transformation.

Here’s our recommended presentation storyline:

2. Concrete outcomes

Data provides the meat of your case study. Numbers, percentages, and concrete results serve as proof that your solution works.

It's one thing to claim that your product or service is effective, but showcasing the results achieved by a real customer through hard data adds credence to your assertions.

3. Visuals that support and expand on the text

Just as a picture is worth a thousand words, well-placed visuals in your case study can make the message clearer and more compelling.

Graphs, charts, and infographics can help break down complex data, making it easier for the audience to digest. Furthermore, they break up long blocks of text, making your case study more engaging.

4. Interactive elements

In a world where scrolling has become second nature, your case study needs to be more than a static document.

Incorporating interactive elements like tabs to click through benefits, live data calculators, or sliders with case studies and customer testimonials invites your audience to engage with your content actively.

Our research showed that decks with interactive elements got scrolled to the bottom 41% more often and had a 21% longer average reading time than non-interactive ones.

Making interactive case studies sounds complicated but it’s actually very easy if you do it with our AI case study creator . You can send it to prospects directly from Storydoc or embed it as part of your website.

By making your reader an active participant in the story, you boost their engagement and increase the chances of them reading your content through to the end.

Benefits of including interactive elements in your case study presentation

More decks read in full

Longer average reading time

5. Testimonials and quotes directly from customers

Customer testimonials and direct quotes inject a sense of authenticity and credibility into your case study.

They bring a human touch to your narrative and foster trust in potential clients.

It's no longer just your voice touting the effectiveness of your solution; it's the voice of a satisfied customer who has personally experienced the benefits of your product or service.

6. Clear call to action

Finally, after painting a vivid picture of your product or service in action, you need to tell your audience what to do next.

A clear CTA—whether it’s to learn more, book a demo, or sign up—makes the next step evident for your audience.

Our data reveals that decks with a clear next step had a conversion rate 27% higher than those that ended with a generic "thank you."

Make the next step simple, straightforward, and compelling, so your reader knows precisely what to do to start their own success story with you.

What not to include in your case study?

While we've covered the essentials to include in your case study, it's equally important to identify elements that could distract from your message, decrease trust, or even confuse your audience.

Here's what you should avoid including in your case study:

1. Unverified claims / data

Every claim you make and every piece of data you share in your case study must be true and easy to check.

Trust is crucial in a case study, and even one bit of wrong information can damage trust and hurt your image.

So, make sure all your facts, figures, and results are correct, and always get the right permissions to share them.

2. Confidential or sensitive information

When writing a case study, it's crucial to remember that privacy matters. Even though it's exciting to share all the details, you need to protect your client's private information.

Always get clear permission before using any client data and remember to hide any information that could identify specific individuals.

This careful approach shows your respect for privacy and builds trust with your audience, making your case study not just engaging, but also responsible and professional.

3. Technical jargon

A case study should be easy for everyone to understand, so avoid using industry-specific language. Even if you know the jargon, your audience might not.

Keeping your language simple and clear will help more people understand your case study. Too much technical language can confuse readers and distract from the story you're trying to tell.

4. Salesy language

While a case study is designed to show prospective clients how valuable your offer is, it's important not to sound too pushy.

A case study should tell a story, not sound like a sales pitch. Keep your language helpful and interesting. The success story should be enough to sell itself.

Create your best case study yet from ready-made templates

Now that you're equipped with all the essentials of crafting a compelling case study, it's time to bring your narrative to life.

Don’t work hard if you can work easy and get better results.

Interactive case study templates are your shortcut to creating engaging and informative case studies. They provide a clear path for your narrative, intuitive ways to present your data, and an engaging space for sharing customer testimonials.

Grab a template, and let your story do the talking!

Hi, I'm Dominika, Content Specialist at Storydoc. As a creative professional with experience in fashion, I'm here to show you how to amplify your brand message through the power of storytelling and eye-catching visuals.

Found this post useful?

Subscribe to our monthly newsletter.

Get notified as more awesome content goes live.

(No spam, no ads, opt-out whenever)

You've just joined an elite group of people that make the top performing 1% of sales and marketing collateral.

Create your best case study to date

Try Storydoc interactive case study creator for 14 days free (keep any presentation you make forever!)

Writing A Case Study

A Complete Case Study Writing Guide With Examples

People also read

Simple Case Study Format for Students to Follow

Understand the Types of Case Study Here

Brilliant Case Study Examples and Templates For Your Help

Many writers find themselves grappling with the challenge of crafting persuasive and engaging case studies. 

The process can be overwhelming, leaving them unsure where to begin or how to structure their study effectively. And, without a clear plan, it's tough to show the value and impact in a convincing way.

But don’t worry!

In this blog, we'll guide you through a systematic process, offering step-by-step instructions on crafting a compelling case study. 

Along the way, we'll share valuable tips and illustrative examples to enhance your understanding. So, let’s get started.

• 1. What is a Case Study? 
• 2. Types of Case Studies
• 3. How To Write a Case Study - 9 Steps
• 4. Case Study Methods
• 5. Case Study Format
• 6. Case Study Examples
• 7. Benefits and Limitations of Case Studies

What is a Case Study? 

A case study is a detailed analysis and examination of a particular subject, situation, or phenomenon. It involves comprehensive research to gain a deep understanding of the context and variables involved. 

Typically used in academic, business, and marketing settings, case studies aim to explore real-life scenarios, providing insights into challenges, solutions, and outcomes. They serve as valuable tools for learning, decision-making, and showcasing success stories.

Tough Essay Due? Hire Tough Writers!

Types of Case Studies

Case studies come in various forms, each tailored to address specific objectives and areas of interest. Here are some of the main types of case studies :

• Illustrative Case Studies: These focus on describing a particular situation or event, providing a detailed account to enhance understanding.
• Exploratory Case Studies: Aimed at investigating an issue and generating initial insights, these studies are particularly useful when exploring new or complex topics.
• Explanatory Case Studies: These delve into the cause-and-effect relationships within a given scenario, aiming to explain why certain outcomes occurred.
• Intrinsic Case Studies: Concentrating on a specific case that holds intrinsic value, these studies explore the unique qualities of the subject itself.
• Instrumental Case Studies: These are conducted to understand a broader issue and use the specific case as a means to gain insights into the larger context.
• Collective Case Studies: Involving the study of multiple cases, this type allows for comparisons and contrasts, offering a more comprehensive view of a phenomenon or problem.

How To Write a Case Study - 9 Steps

Crafting an effective case study involves a structured approach to ensure clarity, engagement, and relevance. 

Here's a step-by-step guide on how to write a compelling case study:

Step 1: Define Your Objective

Before diving into the writing process, clearly define the purpose of your case study. Identify the key questions you want to answer and the specific goals you aim to achieve. 

Whether it's to showcase a successful project, analyze a problem, or demonstrate the effectiveness of a solution, a well-defined objective sets the foundation for a focused and impactful case study.

Step 2: Conduct Thorough Research

Gather all relevant information and data related to your chosen case. This may include interviews, surveys, documentation, and statistical data. 

Ensure that your research is comprehensive, covering all aspects of the case to provide a well-rounded and accurate portrayal. 

The more thorough your research, the stronger your case study's foundation will be.

Step 3: Introduction: Set the Stage

Begin your case study with a compelling introduction that grabs the reader's attention. Clearly state the subject and the primary issue or challenge faced. 

Engage your audience by setting the stage for the narrative, creating intrigue, and highlighting the significance of the case.

Step 4: Present the Background Information

Provide context by presenting the background information of the case. Explore relevant history, industry trends, and any other factors that contribute to a deeper understanding of the situation. 

This section sets the stage for readers, allowing them to comprehend the broader context before delving into the specifics of the case.

Step 5: Outline the Challenges Faced

Identify and articulate the challenges or problems encountered in the case. Clearly define the obstacles that needed to be overcome, emphasizing their significance. 

This section sets the stakes for your audience and prepares them for the subsequent exploration of solutions.

Step 6: Detail the Solutions Implemented

Describe the strategies, actions, or solutions applied to address the challenges outlined. Be specific about the decision-making process, the rationale behind the chosen solutions, and any alternatives considered. 

This part of the case study demonstrates problem-solving skills and showcases the effectiveness of the implemented measures.

Paper Due? Why Suffer? That's our Job!

Step 7: Showcase Measurable Results

Present tangible outcomes and results achieved as a direct consequence of the implemented solutions. Use data, metrics, and success stories to quantify the impact. 

Whether it's increased revenue, improved efficiency, or positive customer feedback, measurable results add credibility and validation to your case study.

Step 8: Include Engaging Visuals

Enhance the readability and visual appeal of your case study by incorporating relevant visuals such as charts, graphs, images, and infographics. 

Visual elements not only break up the text but also provide a clearer representation of data and key points, making your case study more engaging and accessible.

Step 9: Provide a Compelling Conclusion

Wrap up your case study with a strong and conclusive summary. Revisit the initial objectives, recap key findings, and emphasize the overall success or significance of the case. 

This section should leave a lasting impression on your readers, reinforcing the value of the presented information.

Case Study Methods

The methods employed in case study writing are diverse and flexible, catering to the unique characteristics of each case. Here are common methods used in case study writing:

Conducting one-on-one or group interviews with individuals involved in the case to gather firsthand information, perspectives, and insights.

• Observation

Directly observing the subject or situation to collect data on behaviors, interactions, and contextual details.

• Document Analysis

Examining existing documents, records, reports, and other written materials relevant to the case to gather information and insights.

• Surveys and Questionnaires

Distributing structured surveys or questionnaires to relevant stakeholders to collect quantitative data on specific aspects of the case.

• Participant Observation

Combining direct observation with active participation in the activities or events related to the case to gain an insider's perspective.

• Triangulation

Using multiple methods (e.g., interviews, observation, and document analysis) to cross-verify and validate the findings, enhancing the study's reliability.

• Ethnography

Immersing the researcher in the subject's environment over an extended period, focusing on understanding the cultural context and social dynamics.

Case Study Format

Effectively presenting your case study is as crucial as the content itself. Follow these formatting guidelines to ensure clarity and engagement:

• Opt for fonts that are easy to read, such as Arial, Calibri, or Times New Roman.
• Maintain a consistent font size, typically 12 points for the body text.
• Aim for double-line spacing to maintain clarity and prevent overwhelming the reader with too much text.
• Utilize bullet points to present information in a concise and easily scannable format.
• Use numbered lists when presenting a sequence of steps or a chronological order of events.
• Bold or italicize key phrases or important terms to draw attention to critical points.
• Use underline sparingly, as it can sometimes be distracting in digital formats.
• Choose the left alignment style.
• Use hierarchy to distinguish between different levels of headings, making it easy for readers to navigate.

If you're still having trouble organizing your case study, check out this blog on case study format for helpful insights.

Case Study Examples

If you want to understand how to write a case study, examples are a fantastic way to learn. That's why we've gathered a collection of intriguing case study examples for you to review before you begin writing.

Case Study Research Example

Case Study Template

Case Study Introduction Example

Amazon Case Study Example

Business Case Study Example

APA Format Case Study Example

Psychology Case Study Example

Medical Case Study Example

UX Case Study Example

Looking for more examples? Check out our blog on case study examples for your inspiration!

Benefits and Limitations of Case Studies

Case studies are a versatile and in-depth research method, providing a nuanced understanding of complex phenomena. 

However, like any research approach, case studies come with their set of benefits and limitations. Some of them are given below:

Tips for Writing an Effective Case Study

Here are some important tips for writing a good case study:

• Clearly articulate specific, measurable research questions aligned with your objectives.
• Identify whether your case study is exploratory, explanatory, intrinsic, or instrumental.
• Choose a case that aligns with your research questions, whether it involves an individual case or a group of people through multiple case studies.
• Explore the option of conducting multiple case studies to enhance the breadth and depth of your findings.
• Present a structured format with clear sections, ensuring readability and alignment with the type of research.
• Clearly define the significance of the problem or challenge addressed in your case study, tying it back to your research questions.
• Collect and include quantitative and qualitative data to support your analysis and address the identified research questions.
• Provide sufficient detail without overwhelming your audience, ensuring a comprehensive yet concise presentation.
• Emphasize how your findings can be practically applied to real-world situations, linking back to your research objectives.
• Acknowledge and transparently address any limitations in your study, ensuring a comprehensive and unbiased approach.

To sum it up, creating a good case study involves careful thinking to share valuable insights and keep your audience interested. 

Stick to basics like having clear questions and understanding your research type. Choose the right case and keep things organized and balanced.

Remember, your case study should tackle a problem, use relevant data, and show how it can be applied in real life. Be honest about any limitations, and finish with a clear call-to-action to encourage further exploration.

However, if you are having issues understanding how to write a case study, it is best to hire MyPerfectWords.com 's Professional service.  Hiring our custom essay service will ensure that you will get the best grades on your essay without any stress of a deadline. 

So be sure to check out case study writing service online and stay up to the mark with your grades. 

Frequently Asked Questions

What is the purpose of a case study.

The objective of a case study is to do intensive research on a specific matter, such as individuals or communities. It's often used for academic purposes where you want the reader to know all factors involved in your subject while also understanding the processes at play.

What are the sources of a case study?

Some common sources of a case study include:

• Archival records
• Direct observations and encounters
• Participant observation
• Facts and statistics
• Physical artifacts

What is the sample size of a case study?

A normally acceptable size of a case study is 30-50. However, the final number depends on the scope of your study and the on-ground demographic realities.

Write Essay Within 60 Seconds!

Dr. Barbara is a highly experienced writer and author who holds a Ph.D. degree in public health from an Ivy League school. She has worked in the medical field for many years, conducting extensive research on various health topics. Her writing has been featured in several top-tier publications.

Paper Due? Why Suffer? That’s our Job!

Keep reading

• SUGGESTED TOPICS
• The Magazine
• Newsletters
• Managing Yourself
• Managing Teams
• Work-life Balance
• The Big Idea
• Data & Visuals
• Reading Lists
• Case Selections
• HBR Learning
• Topic Feeds
• Account Settings
• Email Preferences

What the Case Study Method Really Teaches

• Nitin Nohria

Seven meta-skills that stick even if the cases fade from memory.

It’s been 100 years since Harvard Business School began using the case study method. Beyond teaching specific subject matter, the case study method excels in instilling meta-skills in students. This article explains the importance of seven such skills: preparation, discernment, bias recognition, judgement, collaboration, curiosity, and self-confidence.

During my decade as dean of Harvard Business School, I spent hundreds of hours talking with our alumni. To enliven these conversations, I relied on a favorite question: “What was the most important thing you learned from your time in our MBA program?”

• Nitin Nohria is the George F. Baker Jr. Professor at Harvard Business School and the former dean of HBS.

Partner Center

• Privacy Policy

Home » Case Study – Methods, Examples and Guide

Case Study – Methods, Examples and Guide

Table of Contents

A case study is a research method that involves an in-depth examination and analysis of a particular phenomenon or case, such as an individual, organization, community, event, or situation.

It is a qualitative research approach that aims to provide a detailed and comprehensive understanding of the case being studied. Case studies typically involve multiple sources of data, including interviews, observations, documents, and artifacts, which are analyzed using various techniques, such as content analysis, thematic analysis, and grounded theory. The findings of a case study are often used to develop theories, inform policy or practice, or generate new research questions.

Types of Case Study

Types and Methods of Case Study are as follows:

Single-Case Study

A single-case study is an in-depth analysis of a single case. This type of case study is useful when the researcher wants to understand a specific phenomenon in detail.

For Example , A researcher might conduct a single-case study on a particular individual to understand their experiences with a particular health condition or a specific organization to explore their management practices. The researcher collects data from multiple sources, such as interviews, observations, and documents, and uses various techniques to analyze the data, such as content analysis or thematic analysis. The findings of a single-case study are often used to generate new research questions, develop theories, or inform policy or practice.

Multiple-Case Study

A multiple-case study involves the analysis of several cases that are similar in nature. This type of case study is useful when the researcher wants to identify similarities and differences between the cases.

For Example, a researcher might conduct a multiple-case study on several companies to explore the factors that contribute to their success or failure. The researcher collects data from each case, compares and contrasts the findings, and uses various techniques to analyze the data, such as comparative analysis or pattern-matching. The findings of a multiple-case study can be used to develop theories, inform policy or practice, or generate new research questions.

Exploratory Case Study

An exploratory case study is used to explore a new or understudied phenomenon. This type of case study is useful when the researcher wants to generate hypotheses or theories about the phenomenon.

For Example, a researcher might conduct an exploratory case study on a new technology to understand its potential impact on society. The researcher collects data from multiple sources, such as interviews, observations, and documents, and uses various techniques to analyze the data, such as grounded theory or content analysis. The findings of an exploratory case study can be used to generate new research questions, develop theories, or inform policy or practice.

Descriptive Case Study

A descriptive case study is used to describe a particular phenomenon in detail. This type of case study is useful when the researcher wants to provide a comprehensive account of the phenomenon.

For Example, a researcher might conduct a descriptive case study on a particular community to understand its social and economic characteristics. The researcher collects data from multiple sources, such as interviews, observations, and documents, and uses various techniques to analyze the data, such as content analysis or thematic analysis. The findings of a descriptive case study can be used to inform policy or practice or generate new research questions.

Instrumental Case Study

An instrumental case study is used to understand a particular phenomenon that is instrumental in achieving a particular goal. This type of case study is useful when the researcher wants to understand the role of the phenomenon in achieving the goal.

For Example, a researcher might conduct an instrumental case study on a particular policy to understand its impact on achieving a particular goal, such as reducing poverty. The researcher collects data from multiple sources, such as interviews, observations, and documents, and uses various techniques to analyze the data, such as content analysis or thematic analysis. The findings of an instrumental case study can be used to inform policy or practice or generate new research questions.

Case Study Data Collection Methods

Here are some common data collection methods for case studies:

Interviews involve asking questions to individuals who have knowledge or experience relevant to the case study. Interviews can be structured (where the same questions are asked to all participants) or unstructured (where the interviewer follows up on the responses with further questions). Interviews can be conducted in person, over the phone, or through video conferencing.

Observations

Observations involve watching and recording the behavior and activities of individuals or groups relevant to the case study. Observations can be participant (where the researcher actively participates in the activities) or non-participant (where the researcher observes from a distance). Observations can be recorded using notes, audio or video recordings, or photographs.

Documents can be used as a source of information for case studies. Documents can include reports, memos, emails, letters, and other written materials related to the case study. Documents can be collected from the case study participants or from public sources.

Surveys involve asking a set of questions to a sample of individuals relevant to the case study. Surveys can be administered in person, over the phone, through mail or email, or online. Surveys can be used to gather information on attitudes, opinions, or behaviors related to the case study.

Artifacts are physical objects relevant to the case study. Artifacts can include tools, equipment, products, or other objects that provide insights into the case study phenomenon.

How to conduct Case Study Research

Conducting a case study research involves several steps that need to be followed to ensure the quality and rigor of the study. Here are the steps to conduct case study research:

• Define the research questions: The first step in conducting a case study research is to define the research questions. The research questions should be specific, measurable, and relevant to the case study phenomenon under investigation.
• Select the case: The next step is to select the case or cases to be studied. The case should be relevant to the research questions and should provide rich and diverse data that can be used to answer the research questions.
• Collect data: Data can be collected using various methods, such as interviews, observations, documents, surveys, and artifacts. The data collection method should be selected based on the research questions and the nature of the case study phenomenon.
• Analyze the data: The data collected from the case study should be analyzed using various techniques, such as content analysis, thematic analysis, or grounded theory. The analysis should be guided by the research questions and should aim to provide insights and conclusions relevant to the research questions.
• Draw conclusions: The conclusions drawn from the case study should be based on the data analysis and should be relevant to the research questions. The conclusions should be supported by evidence and should be clearly stated.
• Validate the findings: The findings of the case study should be validated by reviewing the data and the analysis with participants or other experts in the field. This helps to ensure the validity and reliability of the findings.
• Write the report: The final step is to write the report of the case study research. The report should provide a clear description of the case study phenomenon, the research questions, the data collection methods, the data analysis, the findings, and the conclusions. The report should be written in a clear and concise manner and should follow the guidelines for academic writing.

Examples of Case Study

Here are some examples of case study research:

• The Hawthorne Studies : Conducted between 1924 and 1932, the Hawthorne Studies were a series of case studies conducted by Elton Mayo and his colleagues to examine the impact of work environment on employee productivity. The studies were conducted at the Hawthorne Works plant of the Western Electric Company in Chicago and included interviews, observations, and experiments.
• The Stanford Prison Experiment: Conducted in 1971, the Stanford Prison Experiment was a case study conducted by Philip Zimbardo to examine the psychological effects of power and authority. The study involved simulating a prison environment and assigning participants to the role of guards or prisoners. The study was controversial due to the ethical issues it raised.
• The Challenger Disaster: The Challenger Disaster was a case study conducted to examine the causes of the Space Shuttle Challenger explosion in 1986. The study included interviews, observations, and analysis of data to identify the technical, organizational, and cultural factors that contributed to the disaster.
• The Enron Scandal: The Enron Scandal was a case study conducted to examine the causes of the Enron Corporation’s bankruptcy in 2001. The study included interviews, analysis of financial data, and review of documents to identify the accounting practices, corporate culture, and ethical issues that led to the company’s downfall.
• The Fukushima Nuclear Disaster : The Fukushima Nuclear Disaster was a case study conducted to examine the causes of the nuclear accident that occurred at the Fukushima Daiichi Nuclear Power Plant in Japan in 2011. The study included interviews, analysis of data, and review of documents to identify the technical, organizational, and cultural factors that contributed to the disaster.

Application of Case Study

Case studies have a wide range of applications across various fields and industries. Here are some examples:

Business and Management

Case studies are widely used in business and management to examine real-life situations and develop problem-solving skills. Case studies can help students and professionals to develop a deep understanding of business concepts, theories, and best practices.

Case studies are used in healthcare to examine patient care, treatment options, and outcomes. Case studies can help healthcare professionals to develop critical thinking skills, diagnose complex medical conditions, and develop effective treatment plans.

Case studies are used in education to examine teaching and learning practices. Case studies can help educators to develop effective teaching strategies, evaluate student progress, and identify areas for improvement.

Social Sciences

Case studies are widely used in social sciences to examine human behavior, social phenomena, and cultural practices. Case studies can help researchers to develop theories, test hypotheses, and gain insights into complex social issues.

Law and Ethics

Case studies are used in law and ethics to examine legal and ethical dilemmas. Case studies can help lawyers, policymakers, and ethical professionals to develop critical thinking skills, analyze complex cases, and make informed decisions.

Purpose of Case Study

The purpose of a case study is to provide a detailed analysis of a specific phenomenon, issue, or problem in its real-life context. A case study is a qualitative research method that involves the in-depth exploration and analysis of a particular case, which can be an individual, group, organization, event, or community.

The primary purpose of a case study is to generate a comprehensive and nuanced understanding of the case, including its history, context, and dynamics. Case studies can help researchers to identify and examine the underlying factors, processes, and mechanisms that contribute to the case and its outcomes. This can help to develop a more accurate and detailed understanding of the case, which can inform future research, practice, or policy.

Case studies can also serve other purposes, including:

• Illustrating a theory or concept: Case studies can be used to illustrate and explain theoretical concepts and frameworks, providing concrete examples of how they can be applied in real-life situations.
• Developing hypotheses: Case studies can help to generate hypotheses about the causal relationships between different factors and outcomes, which can be tested through further research.
• Providing insight into complex issues: Case studies can provide insights into complex and multifaceted issues, which may be difficult to understand through other research methods.
• Informing practice or policy: Case studies can be used to inform practice or policy by identifying best practices, lessons learned, or areas for improvement.

Advantages of Case Study Research

There are several advantages of case study research, including:

• In-depth exploration: Case study research allows for a detailed exploration and analysis of a specific phenomenon, issue, or problem in its real-life context. This can provide a comprehensive understanding of the case and its dynamics, which may not be possible through other research methods.
• Rich data: Case study research can generate rich and detailed data, including qualitative data such as interviews, observations, and documents. This can provide a nuanced understanding of the case and its complexity.
• Holistic perspective: Case study research allows for a holistic perspective of the case, taking into account the various factors, processes, and mechanisms that contribute to the case and its outcomes. This can help to develop a more accurate and comprehensive understanding of the case.
• Theory development: Case study research can help to develop and refine theories and concepts by providing empirical evidence and concrete examples of how they can be applied in real-life situations.
• Practical application: Case study research can inform practice or policy by identifying best practices, lessons learned, or areas for improvement.
• Contextualization: Case study research takes into account the specific context in which the case is situated, which can help to understand how the case is influenced by the social, cultural, and historical factors of its environment.

Limitations of Case Study Research

There are several limitations of case study research, including:

• Limited generalizability : Case studies are typically focused on a single case or a small number of cases, which limits the generalizability of the findings. The unique characteristics of the case may not be applicable to other contexts or populations, which may limit the external validity of the research.
• Biased sampling: Case studies may rely on purposive or convenience sampling, which can introduce bias into the sample selection process. This may limit the representativeness of the sample and the generalizability of the findings.
• Subjectivity: Case studies rely on the interpretation of the researcher, which can introduce subjectivity into the analysis. The researcher’s own biases, assumptions, and perspectives may influence the findings, which may limit the objectivity of the research.
• Limited control: Case studies are typically conducted in naturalistic settings, which limits the control that the researcher has over the environment and the variables being studied. This may limit the ability to establish causal relationships between variables.
• Time-consuming: Case studies can be time-consuming to conduct, as they typically involve a detailed exploration and analysis of a specific case. This may limit the feasibility of conducting multiple case studies or conducting case studies in a timely manner.
• Resource-intensive: Case studies may require significant resources, including time, funding, and expertise. This may limit the ability of researchers to conduct case studies in resource-constrained settings.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Questionnaire – Definition, Types, and Examples

Observational Research – Methods and Guide

Quantitative Research – Methods, Types and...

Qualitative Research Methods

Explanatory Research – Types, Methods, Guide

Survey Research – Types, Methods, Examples

Home / Guides / Citation Guides / How to Cite Sources / How to Cite a Case Study in APA, MLA, or Chicago

How to Cite a Case Study in APA, MLA, or Chicago

When citing a case study, the format in MLA and APA is similar to that of a report, and in Chicago style, it is similar to that of a book. For all three citation styles, you will need the name of the author(s), the title of the case study, the year it was published, the publishing organization/publisher, and URL (if applicable). The templates and examples below will demonstrate how to cite a case study in MLA, APA, and Chicago styles.

Author Last Name, Author First Name.  Title of Case Study . Edition (if applicable), volume number (if applicable), Publisher, year of publication, URL without http:// or https:// (if applicable).

Hill, Linda A., et al. HCL Technologies (A). Rev. edition, Harvard Business School, 2008, www.hbs.edu/faculty/Pages/item.aspx?num=34784.

In-text Citation:

(Author Last Name(s) page #)

(Hill et al. 8)

Author Last Name, Author Initial. (Publication Year). Title of Case Study (Case # if applicable). Publishing Organization. URL

Hill, L., Khanna, T., & Stecker, E. (2008). HCL Technologies (A) (Case 408-004). Harvard Business School. https://www.hbs.edu/faculty/Pages/item.aspx?num=34784

(Author Last Name, Publication Year)

(Hill et al., 2008)

Notes-bibliography style

Author Last Name, First Name.  Title of the Case Study . Publishing City: Publishing Organization, Publication Year. URL.

Hill, Linda A., Tarun Khanna, and Emily Stecker. HCL Technologies (A).  Boston: Harvard Business School, 2008. https://www.hbs.edu/faculty/Pages/item.aspx?num=34784.

1. Author First Name Last Name, Title of the Case Study (Publishing City: Publishing Organization, Publication Year), URL.

1. Linda A. Hill, Tarun Khanna, and Emily Stecker, HCL Technologies (A) ( Boston: Harvard Business School, 2008), https://www.hbs.edu/faculty/Pages/item.aspx?num=34784.

Author-date style

Author Last Name, First Name. Publication Year. Title of the Case Study . Publishing City: Publishing Organization. URL.

Hill, Linda A., Tarun Khanna, and Emily Stecker. 2008. HCL Technologies (A).  Boston: Harvard Business School. https://www.hbs.edu/faculty/Pages/item.aspx?num=34784.

In-text citation: 

(Author Last Name Publication Date)

(Holl, Khanna, and Stecker 2008)

Citation Guides

• Annotated Bibliography
• Block Quotes
• Citation Examples
• et al Usage
• In-text Citations
• Page Numbers
• Reference Page
• Sample Paper
• APA 7 Updates
• View APA Guide
• Bibliography
• Works Cited
• MLA 8 Updates
• View MLA Guide

How useful was this post?

Click on a star to rate it!

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

Citation Basics

Harvard Referencing

Plagiarism Basics

Plagiarism Checker

Upload a paper to check for plagiarism against billions of sources and get advanced writing suggestions for clarity and style.

Get Started