abstract research paper scientific

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on February 28, 2019 by Shona McCombes . Revised on July 18, 2023 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a thesis ,  dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, other interesting articles, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the US during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

Prevent plagiarism. Run a free check.

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book or research proposal
• Applying for research grants

It’s easiest to write your abstract last, right before the proofreading stage, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your dissertation topic , but don’t go into detailed background information. If your abstract uses specialized terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyze,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Receive feedback on language, structure, and formatting

Professional editors proofread and edit your paper by focusing on:

• Academic style
• Vague sentences
• Style consistency

See an example

Next, summarize the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalizability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarize the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services or use the paraphrasing tool .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Anchoring bias
• Halo effect
• The Baader–Meinhof phenomenon
• The placebo effect
• Nonresponse bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarizes the contents of your paper.

An abstract for a thesis or dissertation is usually around 200–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis , dissertation or research paper .

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page in the thesis or dissertation , after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

McCombes, S. (2023, July 18). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved April 15, 2024, from https://www.scribbr.com/dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, shorten your abstract or summary, how to write a literature review | guide, examples, & templates, unlimited academic ai-proofreading.

✔ Document error-free in 5minutes ✔ Unlimited document corrections ✔ Specialized in correcting academic texts

Writing an Abstract for Your Research Paper

Definition and Purpose of Abstracts

An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:

• an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
• an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper;
• and, later, an abstract helps readers remember key points from your paper.

It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.

If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.

The Contents of an Abstract

Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.

Here are the typical kinds of information found in most abstracts:

• the context or background information for your research; the general topic under study; the specific topic of your research
• the central questions or statement of the problem your research addresses
• what’s already known about this question, what previous research has done or shown
• the main reason(s) , the exigency, the rationale , the goals for your research—Why is it important to address these questions? Are you, for example, examining a new topic? Why is that topic worth examining? Are you filling a gap in previous research? Applying new methods to take a fresh look at existing ideas or data? Resolving a dispute within the literature in your field? . . .
• your research and/or analytical methods
• your main findings , results , or arguments
• the significance or implications of your findings or arguments.

Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.

When to Write Your Abstract

Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.

What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.

Choosing Verb Tenses within Your Abstract

The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.

The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.

The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).

Sample Abstract 1

From the social sciences.

Reporting new findings about the reasons for increasing economic homogamy among spouses

Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.

Sample Abstract 2

From the humanities.

Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications

Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.

Sample Abstract/Summary 3

From the sciences.

Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells

Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.

Sample Abstract 4, a Structured Abstract

Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study

Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.

Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.

“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.

METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.

RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.

CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)

Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:

Academic and Professional Writing

This is an accordion element with a series of buttons that open and close related content panels.

Analysis Papers

Reading Poetry

A Short Guide to Close Reading for Literary Analysis

Using Literary Quotations

Play Reviews

Writing a Rhetorical Précis to Analyze Nonfiction Texts

Incorporating Interview Data

Grant Proposals

Planning and Writing a Grant Proposal: The Basics

Additional Resources for Grants and Proposal Writing

Job Materials and Application Essays

Writing Personal Statements for Ph.D. Programs

• Before you begin: useful tips for writing your essay
• Guided brainstorming exercises
• Get more help with your essay
• Frequently Asked Questions

Resume Writing Tips

CV Writing Tips

Cover Letters

Business Letters

Proposals and Dissertations

Resources for Proposal Writers

Resources for Dissertators

Research Papers

Planning and Writing Research Papers

Quoting and Paraphrasing

Writing Annotated Bibliographies

Creating Poster Presentations

Thank-You Notes

Advice for Students Writing Thank-You Notes to Donors

Reading for a Review

Critical Reviews

Writing a Review of Literature

Scientific Reports

Scientific Report Format

Sample Lab Assignment

Writing for the Web

Writing an Effective Blog Post

Writing for Social Media: A Guide for Academics

When you choose to publish with PLOS, your research makes an impact. Make your work accessible to all, without restrictions, and accelerate scientific discovery with options like preprints and published peer review that make your work more Open.

• PLOS Biology
• PLOS Climate
• PLOS Complex Systems
• PLOS Computational Biology
• PLOS Digital Health
• PLOS Genetics
• PLOS Global Public Health
• PLOS Medicine
• PLOS Mental Health
• PLOS Neglected Tropical Diseases
• PLOS Pathogens
• PLOS Sustainability and Transformation
• PLOS Collections
• How to Write an Abstract

Expedite peer review, increase search-ability, and set the tone for your study

The abstract is your chance to let your readers know what they can expect from your article. Learn how to write a clear, and concise abstract that will keep your audience reading.

How your abstract impacts editorial evaluation and future readership

After the title , the abstract is the second-most-read part of your article. A good abstract can help to expedite peer review and, if your article is accepted for publication, it’s an important tool for readers to find and evaluate your work. Editors use your abstract when they first assess your article. Prospective reviewers see it when they decide whether to accept an invitation to review. Once published, the abstract gets indexed in PubMed and Google Scholar , as well as library systems and other popular databases. Like the title, your abstract influences keyword search results. Readers will use it to decide whether to read the rest of your article. Other researchers will use it to evaluate your work for inclusion in systematic reviews and meta-analysis. It should be a concise standalone piece that accurately represents your research. 

What to include in an abstract

The main challenge you’ll face when writing your abstract is keeping it concise AND fitting in all the information you need. Depending on your subject area the journal may require a structured abstract following specific headings. A structured abstract helps your readers understand your study more easily. If your journal doesn’t require a structured abstract it’s still a good idea to follow a similar format, just present the abstract as one paragraph without headings. 

Background or Introduction – What is currently known? Start with a brief, 2 or 3 sentence, introduction to the research area. 

Objectives or Aims – What is the study and why did you do it? Clearly state the research question you’re trying to answer.

Methods – What did you do? Explain what you did and how you did it. Include important information about your methods, but avoid the low-level specifics. Some disciplines have specific requirements for abstract methods. 

• CONSORT for randomized trials.
• STROBE for observational studies
• PRISMA for systematic reviews and meta-analyses

Results – What did you find? Briefly give the key findings of your study. Include key numeric data (including confidence intervals or p values), where possible.

Conclusions – What did you conclude? Tell the reader why your findings matter, and what this could mean for the ‘bigger picture’ of this area of research. 

Writing tips

The main challenge you may find when writing your abstract is keeping it concise AND convering all the information you need to.

• Keep it concise and to the point. Most journals have a maximum word count, so check guidelines before you write the abstract to save time editing it later.
• Write for your audience. Are they specialists in your specific field? Are they cross-disciplinary? Are they non-specialists? If you’re writing for a general audience, or your research could be of interest to the public keep your language as straightforward as possible. If you’re writing in English, do remember that not all of your readers will necessarily be native English speakers.
• Focus on key results, conclusions and take home messages.
• Write your paper first, then create the abstract as a summary.
• Check the journal requirements before you write your abstract, eg. required subheadings.
• Include keywords or phrases to help readers search for your work in indexing databases like PubMed or Google Scholar.
• Double and triple check your abstract for spelling and grammar errors. These kind of errors can give potential reviewers the impression that your research isn’t sound, and can make it easier to find reviewers who accept the invitation to review your manuscript. Your abstract should be a taste of what is to come in the rest of your article.

Don’t

• Sensationalize your research.
• Speculate about where this research might lead in the future.
• Use abbreviations or acronyms (unless absolutely necessary or unless they’re widely known, eg. DNA).
• Repeat yourself unnecessarily, eg. “Methods: We used X technique. Results: Using X technique, we found…”
• Contradict anything in the rest of your manuscript.
• Include content that isn’t also covered in the main manuscript.
• Include citations or references.

Tip: How to edit your work

Editing is challenging, especially if you are acting as both a writer and an editor. Read our guidelines for advice on how to refine your work, including useful tips for setting your intentions, re-review, and consultation with colleagues.

• How to Write a Great Title
• How to Write Your Methods
• How to Report Statistics
• How to Write Discussions and Conclusions
• How to Edit Your Work

The contents of the Peer Review Center are also available as a live, interactive training session, complete with slides, talking points, and activities. …

The contents of the Writing Center are also available as a live, interactive training session, complete with slides, talking points, and activities. …

There’s a lot to consider when deciding where to submit your work. Learn how to choose a journal that will help your study reach its audience, while reflecting your values as a researcher…

• Resources Home 🏠
• Try SciSpace Copilot
• Search research papers
• Add Copilot Extension
• Try AI Detector
• Try Paraphraser
• Try Citation Generator
• April Papers
• June Papers
• July Papers

Abstract Writing: A Step-by-Step Guide With Tips & Examples

Table of Contents

Introduction

Abstracts of research papers have always played an essential role in describing your research concisely and clearly to researchers and editors of journals, enticing them to continue reading. However, with the widespread availability of scientific databases, the need to write a convincing abstract is more crucial now than during the time of paper-bound manuscripts.

Abstracts serve to "sell" your research and can be compared with your "executive outline" of a resume or, rather, a formal summary of the critical aspects of your work. Also, it can be the "gist" of your study. Since most educational research is done online, it's a sign that you have a shorter time for impressing your readers, and have more competition from other abstracts that are available to be read.

The APCI (Academic Publishing and Conferences International) articulates 12 issues or points considered during the final approval process for conferences & journals and emphasises the importance of writing an abstract that checks all these boxes (12 points). Since it's the only opportunity you have to captivate your readers, you must invest time and effort in creating an abstract that accurately reflects the critical points of your research.

With that in mind, let’s head over to understand and discover the core concept and guidelines to create a substantial abstract. Also, learn how to organise the ideas or plots into an effective abstract that will be awe-inspiring to the readers you want to reach.

What is Abstract? Definition and Overview

The word "Abstract' is derived from Latin abstractus meaning "drawn off." This etymological meaning also applies to art movements as well as music, like abstract expressionism. In this context, it refers to the revealing of the artist's intention.

Based on this, you can determine the meaning of an abstract: A condensed research summary. It must be self-contained and independent of the body of the research. However, it should outline the subject, the strategies used to study the problem, and the methods implemented to attain the outcomes. The specific elements of the study differ based on the area of study; however, together, it must be a succinct summary of the entire research paper.

Abstracts are typically written at the end of the paper, even though it serves as a prologue. In general, the abstract must be in a position to:

• Describe the paper.
• Identify the problem or the issue at hand.
• Explain to the reader the research process, the results you came up with, and what conclusion you've reached using these results.
• Include keywords to guide your strategy and the content.

Furthermore, the abstract you submit should not reflect upon any of  the following elements:

• Examine, analyse or defend the paper or your opinion.
• What you want to study, achieve or discover.
• Be redundant or irrelevant.

After reading an abstract, your audience should understand the reason - what the research was about in the first place, what the study has revealed and how it can be utilised or can be used to benefit others. You can understand the importance of abstract by knowing the fact that the abstract is the most frequently read portion of any research paper. In simpler terms, it should contain all the main points of the research paper.

What is the Purpose of an Abstract?

Abstracts are typically an essential requirement for research papers; however, it's not an obligation to preserve traditional reasons without any purpose. Abstracts allow readers to scan the text to determine whether it is relevant to their research or studies. The abstract allows other researchers to decide if your research paper can provide them with some additional information. A good abstract paves the interest of the audience to pore through your entire paper to find the content or context they're searching for.

Abstract writing is essential for indexing, as well. The Digital Repository of academic papers makes use of abstracts to index the entire content of academic research papers. Like meta descriptions in the regular Google outcomes, abstracts must include keywords that help researchers locate what they seek.

Types of Abstract

Informative and Descriptive are two kinds of abstracts often used in scientific writing.

A descriptive abstract gives readers an outline of the author's main points in their study. The reader can determine if they want to stick to the research work, based on their interest in the topic. An abstract that is descriptive is similar to the contents table of books, however, the format of an abstract depicts complete sentences encapsulated in one paragraph. It is unfortunate that the abstract can't be used as a substitute for reading a piece of writing because it's just an overview, which omits readers from getting an entire view. Also, it cannot be a way to fill in the gaps the reader may have after reading this kind of abstract since it does not contain crucial information needed to evaluate the article.

To conclude, a descriptive abstract is:

• A simple summary of the task, just summarises the work, but some researchers think it is much more of an outline
• Typically, the length is approximately 100 words. It is too short when compared to an informative abstract.
• A brief explanation but doesn't provide the reader with the complete information they need;
• An overview that omits conclusions and results

An informative abstract is a comprehensive outline of the research. There are times when people rely on the abstract as an information source. And the reason is why it is crucial to provide entire data of particular research. A well-written, informative abstract could be a good substitute for the remainder of the paper on its own.

A well-written abstract typically follows a particular style. The author begins by providing the identifying information, backed by citations and other identifiers of the papers. Then, the major elements are summarised to make the reader aware of the study. It is followed by the methodology and all-important findings from the study. The conclusion then presents study results and ends the abstract with a comprehensive summary.

In a nutshell, an informative abstract:

• Has a length that can vary, based on the subject, but is not longer than 300 words.
• Contains all the content-like methods and intentions
• Offers evidence and possible recommendations.

Informative Abstracts are more frequent than descriptive abstracts because of their extensive content and linkage to the topic specifically. You should select different types of abstracts to papers based on their length: informative abstracts for extended and more complex abstracts and descriptive ones for simpler and shorter research papers.

What are the Characteristics of a Good Abstract?

• A good abstract clearly defines the goals and purposes of the study.
• It should clearly describe the research methodology with a primary focus on data gathering, processing, and subsequent analysis.
• A good abstract should provide specific research findings.
• It presents the principal conclusions of the systematic study.
• It should be concise, clear, and relevant to the field of study.
• A well-designed abstract should be unifying and coherent.
• It is easy to grasp and free of technical jargon.
• It is written impartially and objectively.

What are the various sections of an ideal Abstract?

By now, you must have gained some concrete idea of the essential elements that your abstract needs to convey . Accordingly, the information is broken down into six key sections of the abstract, which include:

An Introduction or Background

Research methodology, objectives and goals, limitations.

Let's go over them in detail.

The introduction, also known as background, is the most concise part of your abstract. Ideally, it comprises a couple of sentences. Some researchers only write one sentence to introduce their abstract. The idea behind this is to guide readers through the key factors that led to your study.

It's understandable that this information might seem difficult to explain in a couple of sentences. For example, think about the following two questions like the background of your study:

• What is currently available about the subject with respect to the paper being discussed?
• What isn't understood about this issue? (This is the subject of your research)

While writing the abstract’s introduction, make sure that it is not lengthy. Because if it crosses the word limit, it may eat up the words meant to be used for providing other key information.

Research methodology is where you describe the theories and techniques you used in your research. It is recommended that you describe what you have done and the method you used to get your thorough investigation results. Certainly, it is the second-longest paragraph in the abstract.

In the research methodology section, it is essential to mention the kind of research you conducted; for instance, qualitative research or quantitative research (this will guide your research methodology too) . If you've conducted quantitative research, your abstract should contain information like the sample size, data collection method, sampling techniques, and duration of the study. Likewise, your abstract should reflect observational data, opinions, questionnaires (especially the non-numerical data) if you work on qualitative research.

The research objectives and goals speak about what you intend to accomplish with your research. The majority of research projects focus on the long-term effects of a project, and the goals focus on the immediate, short-term outcomes of the research. It is possible to summarise both in just multiple sentences.

In stating your objectives and goals, you give readers a picture of the scope of the study, its depth and the direction your research ultimately follows. Your readers can evaluate the results of your research against the goals and stated objectives to determine if you have achieved the goal of your research.

In the end, your readers are more attracted by the results you've obtained through your study. Therefore, you must take the time to explain each relevant result and explain how they impact your research. The results section exists as the longest in your abstract, and nothing should diminish its reach or quality.

One of the most important things you should adhere to is to spell out details and figures on the results of your research.

Instead of making a vague assertion such as, "We noticed that response rates varied greatly between respondents with high incomes and those with low incomes", Try these: "The response rate was higher for high-income respondents than those with lower incomes (59 30 percent vs. 30 percent in both cases; P<0.01)."

You're likely to encounter certain obstacles during your research. It could have been during data collection or even during conducting the sample . Whatever the issue, it's essential to inform your readers about them and their effects on the research.

Research limitations offer an opportunity to suggest further and deep research. If, for instance, you were forced to change for convenient sampling and snowball samples because of difficulties in reaching well-suited research participants, then you should mention this reason when you write your research abstract. In addition, a lack of prior studies on the subject could hinder your research.

Your conclusion should include the same number of sentences to wrap the abstract as the introduction. The majority of researchers offer an idea of the consequences of their research in this case.

Your conclusion should include three essential components:

• A significant take-home message.
• Corresponding important findings.
• The Interpretation.

Even though the conclusion of your abstract needs to be brief, it can have an enormous influence on the way that readers view your research. Therefore, make use of this section to reinforce the central message from your research. Be sure that your statements reflect the actual results and the methods you used to conduct your research.

Good Abstract Examples

Abstract example #1.

Children’s consumption behavior in response to food product placements in movies.

The abstract:

"Almost all research into the effects of brand placements on children has focused on the brand's attitudes or behavior intentions. Based on the significant differences between attitudes and behavioral intentions on one hand and actual behavior on the other hand, this study examines the impact of placements by brands on children's eating habits. Children aged 6-14 years old were shown an excerpt from the popular film Alvin and the Chipmunks and were shown places for the item Cheese Balls. Three different versions were developed with no placements, one with moderately frequent placements and the third with the highest frequency of placement. The results revealed that exposure to high-frequency places had a profound effect on snack consumption, however, there was no impact on consumer attitudes towards brands or products. The effects were not dependent on the age of the children. These findings are of major importance to researchers studying consumer behavior as well as nutrition experts as well as policy regulators."

Abstract Example #2

Social comparisons on social media: The impact of Facebook on young women’s body image concerns and mood. The abstract:

"The research conducted in this study investigated the effects of Facebook use on women's moods and body image if the effects are different from an internet-based fashion journal and if the appearance comparison tendencies moderate one or more of these effects. Participants who were female ( N = 112) were randomly allocated to spend 10 minutes exploring their Facebook account or a magazine's website or an appearance neutral control website prior to completing state assessments of body dissatisfaction, mood, and differences in appearance (weight-related and facial hair, face, and skin). Participants also completed a test of the tendency to compare appearances. The participants who used Facebook were reported to be more depressed than those who stayed on the control site. In addition, women who have the tendency to compare appearances reported more facial, hair and skin-related issues following Facebook exposure than when they were exposed to the control site. Due to its popularity it is imperative to conduct more research to understand the effect that Facebook affects the way people view themselves."

Abstract Example #3

The Relationship Between Cell Phone Use and Academic Performance in a Sample of U.S. College Students

"The cellphone is always present on campuses of colleges and is often utilised in situations in which learning takes place. The study examined the connection between the use of cell phones and the actual grades point average (GPA) after adjusting for predictors that are known to be a factor. In the end 536 students in the undergraduate program from 82 self-reported majors of an enormous, public institution were studied. Hierarchical analysis ( R 2 = .449) showed that use of mobile phones is significantly ( p < .001) and negative (b equal to -.164) connected to the actual college GPA, after taking into account factors such as demographics, self-efficacy in self-regulated learning, self-efficacy to improve academic performance, and the actual high school GPA that were all important predictors ( p < .05). Therefore, after adjusting for other known predictors increasing cell phone usage was associated with lower academic performance. While more research is required to determine the mechanisms behind these results, they suggest the need to educate teachers and students to the possible academic risks that are associated with high-frequency mobile phone usage."

Quick tips on writing a good abstract

There exists a common dilemma among early age researchers whether to write the abstract at first or last? However, it's recommended to compose your abstract when you've completed the research since you'll have all the information to give to your readers. You can, however, write a draft at the beginning of your research and add in any gaps later.

If you find abstract writing a herculean task, here are the few tips to help you with it:

1. Always develop a framework to support your abstract

Before writing, ensure you create a clear outline for your abstract. Divide it into sections and draw the primary and supporting elements in each one. You can include keywords and a few sentences that convey the essence of your message.

2. Review Other Abstracts

Abstracts are among the most frequently used research documents, and thousands of them were written in the past. Therefore, prior to writing yours, take a look at some examples from other abstracts. There are plenty of examples of abstracts for dissertations in the dissertation and thesis databases.

3. Avoid Jargon To the Maximum

When you write your abstract, focus on simplicity over formality. You should  write in simple language, and avoid excessive filler words or ambiguous sentences. Keep in mind that your abstract must be readable to those who aren't acquainted with your subject.

4. Focus on Your Research

It's a given fact that the abstract you write should be about your research and the findings you've made. It is not the right time to mention secondary and primary data sources unless it's absolutely required.

Conclusion: How to Structure an Interesting Abstract?

Abstracts are a short outline of your essay. However, it's among the most important, if not the most important. The process of writing an abstract is not straightforward. A few early-age researchers tend to begin by writing it, thinking they are doing it to "tease" the next step (the document itself). However, it is better to treat it as a spoiler.

The simple, concise style of the abstract lends itself to a well-written and well-investigated study. If your research paper doesn't provide definitive results, or the goal of your research is questioned, so will the abstract. Thus, only write your abstract after witnessing your findings and put your findings in the context of a larger scenario.

The process of writing an abstract can be daunting, but with these guidelines, you will succeed. The most efficient method of writing an excellent abstract is to centre the primary points of your abstract, including the research question and goals methods, as well as key results.

Interested in learning more about dedicated research solutions? Go to the SciSpace product page to find out how our suite of products can help you simplify your research workflows so you can focus on advancing science.

The best-in-class solution is equipped with features such as literature search and discovery, profile management, research writing and formatting, and so much more.

But before you go,

You might also like.

Consensus GPT vs. SciSpace GPT: Choose the Best GPT for Research

Literature Review and Theoretical Framework: Understanding the Differences

Types of Essays in Academic Writing - Quick Guide (2024)

• USC Libraries
• Research Guides

Organizing Your Social Sciences Research Paper

• 3. The Abstract
• Purpose of Guide
• Design Flaws to Avoid
• Independent and Dependent Variables
• Glossary of Research Terms
• Reading Research Effectively
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Applying Critical Thinking
• Choosing a Title
• Making an Outline
• Paragraph Development
• Research Process Video Series
• Executive Summary
• The C.A.R.S. Model
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Primary Sources
• Secondary Sources
• Tiertiary Sources
• Scholarly vs. Popular Publications
• Qualitative Methods
• Quantitative Methods
• Insiderness
• Using Non-Textual Elements
• Limitations of the Study
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Generative AI and Writing
• USC Libraries Tutorials and Other Guides
• Bibliography

An abstract summarizes, usually in one paragraph of 300 words or less, the major aspects of the entire paper in a prescribed sequence that includes: 1) the overall purpose of the study and the research problem(s) you investigated; 2) the basic design of the study; 3) major findings or trends found as a result of your analysis; and, 4) a brief summary of your interpretations and conclusions.

Writing an Abstract. The Writing Center. Clarion University, 2009; Writing an Abstract for Your Research Paper. The Writing Center, University of Wisconsin, Madison; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-first Century . Oxford, UK: Chandos Publishing, 2010;

Importance of a Good Abstract

Sometimes your professor will ask you to include an abstract, or general summary of your work, with your research paper. The abstract allows you to elaborate upon each major aspect of the paper and helps readers decide whether they want to read the rest of the paper. Therefore, enough key information [e.g., summary results, observations, trends, etc.] must be included to make the abstract useful to someone who may want to examine your work.

How do you know when you have enough information in your abstract? A simple rule-of-thumb is to imagine that you are another researcher doing a similar study. Then ask yourself: if your abstract was the only part of the paper you could access, would you be happy with the amount of information presented there? Does it tell the whole story about your study? If the answer is "no" then the abstract likely needs to be revised.

Farkas, David K. “A Scheme for Understanding and Writing Summaries.” Technical Communication 67 (August 2020): 45-60;  How to Write a Research Abstract. Office of Undergraduate Research. University of Kentucky; Staiger, David L. “What Today’s Students Need to Know about Writing Abstracts.” International Journal of Business Communication January 3 (1966): 29-33; Swales, John M. and Christine B. Feak. Abstracts and the Writing of Abstracts . Ann Arbor, MI: University of Michigan Press, 2009.

Structure and Writing Style

I.  Types of Abstracts

To begin, you need to determine which type of abstract you should include with your paper. There are four general types.

Critical Abstract A critical abstract provides, in addition to describing main findings and information, a judgment or comment about the study’s validity, reliability, or completeness. The researcher evaluates the paper and often compares it with other works on the same subject. Critical abstracts are generally 400-500 words in length due to the additional interpretive commentary. These types of abstracts are used infrequently.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarized. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less. Informative Abstract The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Highlight Abstract A highlight abstract is specifically written to attract the reader’s attention to the study. No pretense is made of there being either a balanced or complete picture of the paper and, in fact, incomplete and leading remarks may be used to spark the reader’s interest. In that a highlight abstract cannot stand independent of its associated article, it is not a true abstract and, therefore, rarely used in academic writing.

II.  Writing Style

Use the active voice when possible , but note that much of your abstract may require passive sentence constructions. Regardless, write your abstract using concise, but complete, sentences. Get to the point quickly and always use the past tense because you are reporting on a study that has been completed.

Abstracts should be formatted as a single paragraph in a block format and with no paragraph indentations. In most cases, the abstract page immediately follows the title page. Do not number the page. Rules set forth in writing manual vary but, in general, you should center the word "Abstract" at the top of the page with double spacing between the heading and the abstract. The final sentences of an abstract concisely summarize your study’s conclusions, implications, or applications to practice and, if appropriate, can be followed by a statement about the need for additional research revealed from the findings.

Composing Your Abstract

Although it is the first section of your paper, the abstract should be written last since it will summarize the contents of your entire paper. A good strategy to begin composing your abstract is to take whole sentences or key phrases from each section of the paper and put them in a sequence that summarizes the contents. Then revise or add connecting phrases or words to make the narrative flow clearly and smoothly. Note that statistical findings should be reported parenthetically [i.e., written in parentheses].

Before handing in your final paper, check to make sure that the information in the abstract completely agrees with what you have written in the paper. Think of the abstract as a sequential set of complete sentences describing the most crucial information using the fewest necessary words. The abstract SHOULD NOT contain:

• A catchy introductory phrase, provocative quote, or other device to grab the reader's attention,
• Lengthy background or contextual information,
• Redundant phrases, unnecessary adverbs and adjectives, and repetitive information;
• Acronyms or abbreviations,
• References to other literature [say something like, "current research shows that..." or "studies have indicated..."],
• Using ellipticals [i.e., ending with "..."] or incomplete sentences,
• Jargon or terms that may be confusing to the reader,
• Citations to other works, and
• Any sort of image, illustration, figure, or table, or references to them.

Abstract. Writing Center. University of Kansas; Abstract. The Structure, Format, Content, and Style of a Journal-Style Scientific Paper. Department of Biology. Bates College; Abstracts. The Writing Center. University of North Carolina; Borko, Harold and Seymour Chatman. "Criteria for Acceptable Abstracts: A Survey of Abstracters' Instructions." American Documentation 14 (April 1963): 149-160; Abstracts. The Writer’s Handbook. Writing Center. University of Wisconsin, Madison; Hartley, James and Lucy Betts. "Common Weaknesses in Traditional Abstracts in the Social Sciences." Journal of the American Society for Information Science and Technology 60 (October 2009): 2010-2018; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-first Century. Oxford, UK: Chandos Publishing, 2010; Procter, Margaret. The Abstract. University College Writing Centre. University of Toronto; Riordan, Laura. “Mastering the Art of Abstracts.” The Journal of the American Osteopathic Association 115 (January 2015 ): 41-47; Writing Report Abstracts. The Writing Lab and The OWL. Purdue University; Writing Abstracts. Writing Tutorial Services, Center for Innovative Teaching and Learning. Indiana University; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-First Century . Oxford, UK: 2010; Writing an Abstract for Your Research Paper. The Writing Center, University of Wisconsin, Madison.

Writing Tip

Never Cite Just the Abstract!

Citing to just a journal article's abstract does not confirm for the reader that you have conducted a thorough or reliable review of the literature. If the full-text is not available, go to the USC Libraries main page and enter the title of the article [NOT the title of the journal]. If the Libraries have a subscription to the journal, the article should appear with a link to the full-text or to the journal publisher page where you can get the article. If the article does not appear, try searching Google Scholar using the link on the USC Libraries main page. If you still can't find the article after doing this, contact a librarian or you can request it from our free i nterlibrary loan and document delivery service .

• << Previous: Research Process Video Series
• Next: Executive Summary >>
• Last Updated: Apr 16, 2024 10:20 AM
• URL: https://libguides.usc.edu/writingguide

What this handout is about

This handout provides definitions and examples of the two main types of abstracts: descriptive and informative. It also provides guidelines for constructing an abstract and general tips for you to keep in mind when drafting. Finally, it includes a few examples of abstracts broken down into their component parts.

What is an abstract?

An abstract is a self-contained, short, and powerful statement that describes a larger work. Components vary according to discipline. An abstract of a social science or scientific work may contain the scope, purpose, results, and contents of the work. An abstract of a humanities work may contain the thesis, background, and conclusion of the larger work. An abstract is not a review, nor does it evaluate the work being abstracted. While it contains key words found in the larger work, the abstract is an original document rather than an excerpted passage.

Why write an abstract?

You may write an abstract for various reasons. The two most important are selection and indexing. Abstracts allow readers who may be interested in a longer work to quickly decide whether it is worth their time to read it. Also, many online databases use abstracts to index larger works. Therefore, abstracts should contain keywords and phrases that allow for easy searching.

Say you are beginning a research project on how Brazilian newspapers helped Brazil’s ultra-liberal president Luiz Ignácio da Silva wrest power from the traditional, conservative power base. A good first place to start your research is to search Dissertation Abstracts International for all dissertations that deal with the interaction between newspapers and politics. “Newspapers and politics” returned 569 hits. A more selective search of “newspapers and Brazil” returned 22 hits. That is still a fair number of dissertations. Titles can sometimes help winnow the field, but many titles are not very descriptive. For example, one dissertation is titled “Rhetoric and Riot in Rio de Janeiro.” It is unclear from the title what this dissertation has to do with newspapers in Brazil. One option would be to download or order the entire dissertation on the chance that it might speak specifically to the topic. A better option is to read the abstract. In this case, the abstract reveals the main focus of the dissertation:

This dissertation examines the role of newspaper editors in the political turmoil and strife that characterized late First Empire Rio de Janeiro (1827-1831). Newspaper editors and their journals helped change the political culture of late First Empire Rio de Janeiro by involving the people in the discussion of state. This change in political culture is apparent in Emperor Pedro I’s gradual loss of control over the mechanisms of power. As the newspapers became more numerous and powerful, the Emperor lost his legitimacy in the eyes of the people. To explore the role of the newspapers in the political events of the late First Empire, this dissertation analyzes all available newspapers published in Rio de Janeiro from 1827 to 1831. Newspapers and their editors were leading forces in the effort to remove power from the hands of the ruling elite and place it under the control of the people. In the process, newspapers helped change how politics operated in the constitutional monarchy of Brazil.

From this abstract you now know that although the dissertation has nothing to do with modern Brazilian politics, it does cover the role of newspapers in changing traditional mechanisms of power. After reading the abstract, you can make an informed judgment about whether the dissertation would be worthwhile to read.

Besides selection, the other main purpose of the abstract is for indexing. Most article databases in the online catalog of the library enable you to search abstracts. This allows for quick retrieval by users and limits the extraneous items recalled by a “full-text” search. However, for an abstract to be useful in an online retrieval system, it must incorporate the key terms that a potential researcher would use to search. For example, if you search Dissertation Abstracts International using the keywords “France” “revolution” and “politics,” the search engine would search through all the abstracts in the database that included those three words. Without an abstract, the search engine would be forced to search titles, which, as we have seen, may not be fruitful, or else search the full text. It’s likely that a lot more than 60 dissertations have been written with those three words somewhere in the body of the entire work. By incorporating keywords into the abstract, the author emphasizes the central topics of the work and gives prospective readers enough information to make an informed judgment about the applicability of the work.

When do people write abstracts?

• when submitting articles to journals, especially online journals
• when applying for research grants
• when writing a book proposal
• when completing the Ph.D. dissertation or M.A. thesis
• when writing a proposal for a conference paper
• when writing a proposal for a book chapter

Most often, the author of the entire work (or prospective work) writes the abstract. However, there are professional abstracting services that hire writers to draft abstracts of other people’s work. In a work with multiple authors, the first author usually writes the abstract. Undergraduates are sometimes asked to draft abstracts of books/articles for classmates who have not read the larger work.

Types of abstracts

There are two types of abstracts: descriptive and informative. They have different aims, so as a consequence they have different components and styles. There is also a third type called critical, but it is rarely used. If you want to find out more about writing a critique or a review of a work, see the UNC Writing Center handout on writing a literature review . If you are unsure which type of abstract you should write, ask your instructor (if the abstract is for a class) or read other abstracts in your field or in the journal where you are submitting your article.

Descriptive abstracts

A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract describes the work being abstracted. Some people consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short—100 words or less.

Informative abstracts

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the writer presents and explains all the main arguments and the important results and evidence in the complete article/paper/book. An informative abstract includes the information that can be found in a descriptive abstract (purpose, methods, scope) but also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is rarely more than 10% of the length of the entire work. In the case of a longer work, it may be much less.

Here are examples of a descriptive and an informative abstract of this handout on abstracts . Descriptive abstract:

The two most common abstract types—descriptive and informative—are described and examples of each are provided.

Informative abstract:

Abstracts present the essential elements of a longer work in a short and powerful statement. The purpose of an abstract is to provide prospective readers the opportunity to judge the relevance of the longer work to their projects. Abstracts also include the key terms found in the longer work and the purpose and methods of the research. Authors abstract various longer works, including book proposals, dissertations, and online journal articles. There are two main types of abstracts: descriptive and informative. A descriptive abstract briefly describes the longer work, while an informative abstract presents all the main arguments and important results. This handout provides examples of various types of abstracts and instructions on how to construct one.

Which type should I use?

Your best bet in this case is to ask your instructor or refer to the instructions provided by the publisher. You can also make a guess based on the length allowed; i.e., 100-120 words = descriptive; 250+ words = informative.

How do I write an abstract?

The format of your abstract will depend on the work being abstracted. An abstract of a scientific research paper will contain elements not found in an abstract of a literature article, and vice versa. However, all abstracts share several mandatory components, and there are also some optional parts that you can decide to include or not. When preparing to draft your abstract, keep the following key process elements in mind:

• Reason for writing: What is the importance of the research? Why would a reader be interested in the larger work?
• Problem: What problem does this work attempt to solve? What is the scope of the project? What is the main argument/thesis/claim?
• Methodology: An abstract of a scientific work may include specific models or approaches used in the larger study. Other abstracts may describe the types of evidence used in the research.
• Results: Again, an abstract of a scientific work may include specific data that indicates the results of the project. Other abstracts may discuss the findings in a more general way.
• Implications: What changes should be implemented as a result of the findings of the work? How does this work add to the body of knowledge on the topic?

(This list of elements is adapted with permission from Philip Koopman, “How to Write an Abstract.” )

All abstracts include:

• A full citation of the source, preceding the abstract.
• The most important information first.
• The same type and style of language found in the original, including technical language.
• Key words and phrases that quickly identify the content and focus of the work.
• Clear, concise, and powerful language.

Abstracts may include:

• The thesis of the work, usually in the first sentence.
• Background information that places the work in the larger body of literature.
• The same chronological structure as the original work.

How not to write an abstract:

• Do not refer extensively to other works.
• Do not add information not contained in the original work.
• Do not define terms.

If you are abstracting your own writing

When abstracting your own work, it may be difficult to condense a piece of writing that you have agonized over for weeks (or months, or even years) into a 250-word statement. There are some tricks that you could use to make it easier, however.

Reverse outlining:

This technique is commonly used when you are having trouble organizing your own writing. The process involves writing down the main idea of each paragraph on a separate piece of paper– see our short video . For the purposes of writing an abstract, try grouping the main ideas of each section of the paper into a single sentence. Practice grouping ideas using webbing or color coding .

For a scientific paper, you may have sections titled Purpose, Methods, Results, and Discussion. Each one of these sections will be longer than one paragraph, but each is grouped around a central idea. Use reverse outlining to discover the central idea in each section and then distill these ideas into one statement.

Cut and paste:

To create a first draft of an abstract of your own work, you can read through the entire paper and cut and paste sentences that capture key passages. This technique is useful for social science research with findings that cannot be encapsulated by neat numbers or concrete results. A well-written humanities draft will have a clear and direct thesis statement and informative topic sentences for paragraphs or sections. Isolate these sentences in a separate document and work on revising them into a unified paragraph.

If you are abstracting someone else’s writing

When abstracting something you have not written, you cannot summarize key ideas just by cutting and pasting. Instead, you must determine what a prospective reader would want to know about the work. There are a few techniques that will help you in this process:

Identify key terms:

Search through the entire document for key terms that identify the purpose, scope, and methods of the work. Pay close attention to the Introduction (or Purpose) and the Conclusion (or Discussion). These sections should contain all the main ideas and key terms in the paper. When writing the abstract, be sure to incorporate the key terms.

Highlight key phrases and sentences:

Instead of cutting and pasting the actual words, try highlighting sentences or phrases that appear to be central to the work. Then, in a separate document, rewrite the sentences and phrases in your own words.

Don’t look back:

After reading the entire work, put it aside and write a paragraph about the work without referring to it. In the first draft, you may not remember all the key terms or the results, but you will remember what the main point of the work was. Remember not to include any information you did not get from the work being abstracted.

Revise, revise, revise

No matter what type of abstract you are writing, or whether you are abstracting your own work or someone else’s, the most important step in writing an abstract is to revise early and often. When revising, delete all extraneous words and incorporate meaningful and powerful words. The idea is to be as clear and complete as possible in the shortest possible amount of space. The Word Count feature of Microsoft Word can help you keep track of how long your abstract is and help you hit your target length.

Example 1: Humanities abstract

Kenneth Tait Andrews, “‘Freedom is a constant struggle’: The dynamics and consequences of the Mississippi Civil Rights Movement, 1960-1984” Ph.D. State University of New York at Stony Brook, 1997 DAI-A 59/02, p. 620, Aug 1998

This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so. The time period studied includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies. Data have been collected from archives, interviews, newspapers, and published reports. This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Now let’s break down this abstract into its component parts to see how the author has distilled his entire dissertation into a ~200 word abstract.

What the dissertation does This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so.

How the dissertation does it The time period studied in this dissertation includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies.

What materials are used Data have been collected from archives, interviews, newspapers, and published reports.

Conclusion This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to movement demands and the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Keywords social movements Civil Rights Movement Mississippi voting rights desegregation

Example 2: Science Abstract

Luis Lehner, “Gravitational radiation from black hole spacetimes” Ph.D. University of Pittsburgh, 1998 DAI-B 59/06, p. 2797, Dec 1998

The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search for and analysis of detected signals. The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm. This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

This science abstract covers much of the same ground as the humanities one, but it asks slightly different questions.

Why do this study The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search and analysis of the detected signals.

What the study does The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm.

Results This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

Keywords gravitational radiation (GR) spacetimes black holes

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Belcher, Wendy Laura. 2009. Writing Your Journal Article in Twelve Weeks: A Guide to Academic Publishing Success. Thousand Oaks, CA: Sage Press.

Koopman, Philip. 1997. “How to Write an Abstract.” Carnegie Mellon University. October 1997. http://users.ece.cmu.edu/~koopman/essays/abstract.html .

Lancaster, F.W. 2003. Indexing And Abstracting in Theory and Practice , 3rd ed. London: Facet Publishing.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

How to Write an Abstract for a Scientific Paper

• Chemical Laws
• Periodic Table
• Projects & Experiments
• Scientific Method
• Biochemistry
• Physical Chemistry
• Medical Chemistry
• Chemistry In Everyday Life
• Famous Chemists
• Activities for Kids
• Abbreviations & Acronyms
• Weather & Climate
• Ph.D., Biomedical Sciences, University of Tennessee at Knoxville
• B.A., Physics and Mathematics, Hastings College

If you're preparing a research paper or grant proposal, you'll need to know how to write an abstract. Here's a look at what an abstract is and how to write one.

An abstract is a concise summary of an experiment or research project. It should be brief -- typically under 200 words. The purpose of the abstract is to summarize the research paper by stating the purpose of the research, the experimental method, the findings, and the conclusions.

• How to Write an Abstract

The format you'll use for the abstract depends on its purpose. If you're writing for a specific publication or a class assignment, you'll probably need to follow specific guidelines. If there isn't a required format, you'll need to choose from one of two possible types of abstracts.

Informational Abstracts

An informational abstract is a type of abstract used to communicate an experiment or lab report .

• An informational abstract is like a mini-paper. Its length ranges from a paragraph to 1 to 2 pages, depending on the scope of the report. Aim for less than 10% the length of the full report.
• Summarize all aspects of the report, including purpose, method, results, conclusions, and recommendations. There are no graphs, charts, tables, or images in an abstract. Similarly, an abstract does not include a bibliography or references.
• Highlight important discoveries or anomalies. It's okay if the experiment did not go as planned and necessary to state the outcome in the abstract.

Here is a good format to follow, in order, when writing an informational abstract. Each section is a sentence or two long:

• Motivation or Purpose: State why the subject is important or why anyone should care about the experiment and its results.
• Problem: State the hypothesis of the experiment or describe the problem you are trying to solve.
• Method: How did you test the hypothesis or try to solve the problem?
• Results: What was the outcome of the study? Did you support or reject a hypothesis? Did you solve a problem? How close were the results to what you expected? State-specific numbers.
• Conclusions: What is the significance of your findings? Do the results lead to an increase in knowledge, a solution that may be applied to other problems, etc.?

Need examples? The abstracts at PubMed.gov (National Institutes of Health database) are informational abstracts. A random example is this abstract on the effect of coffee consumption on Acute Coronary Syndrome .

Descriptive Abstracts

A descriptive abstract is an extremely brief description of the contents of a report. Its purpose is to tell the reader what to expect from the full paper.

• A descriptive abstract is very short, typically less than 100 words.
• Tells the reader what the report contains, but doesn't go into detail.
• It briefly summarizes the purpose and experimental method, but not the results or conclusions. Basically, say why and how the study was made, but don't go into findings. 

Tips for Writing a Good Abstract

• Write the paper before writing the abstract. You might be tempted to start with the abstract since it comes between the title page and the paper, but it's much easier to summarize a paper or report after it has been completed.
• Write in the third person. Replace phrases like "I found" or "we examined" with phrases like "it was determined" or "this paper provides" or "the investigators found".
• Write the abstract and then pare it down to meet the word limit. In some cases, a long abstract will result in automatic rejection for publication or a grade!
• Think of keywords and phrases a person looking for your work might use or enter into a search engine. Include those words in your abstract. Even if the paper won't be published, this is a good habit to develop.
• All information in the abstract must be covered in the body of the paper. Don't put a fact in the abstract that isn't described in the report.
• Proof-read the abstract for typos, spelling mistakes, and punctuation errors.
• Abstract Writing for Sociology
• How to Write a Science Fair Project Report
• How to Format a Biology Lab Report
• How to Write a Lab Report
• Six Steps of the Scientific Method
• Science Lab Report Template - Fill in the Blanks
• An Introduction to Academic Writing
• Null Hypothesis Definition and Examples
• Scientific Method Flow Chart
• How To Design a Science Fair Experiment
• How to Write a Research Paper That Earns an A
• How to Write a Great Book Report
• What Is a Testable Hypothesis?
• 6 Steps to Writing the Perfect Personal Essay

• Langson Library
• Science Library
• Grunigen Medical Library
• Law Library
• Connect From Off-Campus
• Accessibility
• Gateway Study Center

Email this link

Writing a scientific paper.

• Writing a lab report

What is an abstract?

What is a "good" abstract, techniques to write an abstract, "abstract checklist" from: how to write a good scientific paper. chris a. mack. spie. 2018..

• INTRODUCTION
• LITERATURE CITED
• Bibliography of guides to scientific writing and presenting
• Peer Review
• Presentations
• Lab Report Writing Guides on the Web

There are as many kinds as abstracts as there are types of research papers.  The classic abstract is usually a "Informative" abstract. This kind of abstract communicates compressed information and include the purpose, methods, and scope of the article. They are usually short (250 words or less) and allow the reader to decide whether they want to read the article.

The goal is to communicate:

• What was done?
• Why was it done?
• How was it done?
• What was found?
• What is the significance of the findings?
• Self contained. Uses 1 or more well developed paragraphs
• Uses introduction/body/conclusion structure
• Presents purpose, results, conclusions and recommendations in that order
• Adds no new information
• Is understandable to a wide audience
• Write the abstract last
• Reread the article looking specifically for the main parts: Purpose, methods, scope, results, conclusions, and recommendations
• Write a first rough draft without looking at the original article
• Edit your draft by correcting organization, improving transitions, dropping unnecessary information and words, and adding important information you left out

The abstract should be a concise (200 words or less), standalone summary of the paper, with 1–2 sentences on each of these topics:

• Background: What issues led to this work? What is the environment that makes this work interesting or important?
• Aim: What were the goals of this work? What gap is being filled?
• Approach: What went into trying to achieve the aims (e.g., experimental method, simulation approach, theoretical approach, combinations of these, etc.)? What was actually done?
• Results: What were the main results of the study (including numbers, if appropriate)?
• Conclusions: What were the main conclusions? Why are the results important? Where will they lead?

The abstract should be written for the audience of this journal: do not assume too much or too little background with the topic.

Ensure that all of the information found in the abstract also can be found in the body of the paper.

Ensure that the important information of the paper is found in the abstract.

Avoid: using the first paragraph of the introduction as an abstract; citations in the abstract; acronyms (but if used, spell them out); referring to figures or tables from the body of the paper; use of the first person; use of words like “new” or “novel,” or phrases like “in this paper,” “we report,” or “will be discussed.” 

• << Previous: TITLE
• Next: INTRODUCTION >>
• Last Updated: Aug 4, 2023 9:33 AM
• URL: https://guides.lib.uci.edu/scientificwriting

Off-campus? Please use the Software VPN and choose the group UCIFull to access licensed content. For more information, please Click here

Software VPN is not available for guests, so they may not have access to some content when connecting from off-campus.

• Affiliate Program

• UNITED STATES
• 台灣 (TAIWAN)
• TÜRKIYE (TURKEY)
• Academic Editing Services
• - Research Paper
• - Journal Manuscript
• - Dissertation
• - College & University Assignments
• Admissions Editing Services
• - Application Essay
• - Personal Statement
• - Recommendation Letter
• - Cover Letter
• - CV/Resume
• Business Editing Services
• - Business Documents
• - Report & Brochure
• - Website & Blog
• Writer Editing Services
• - Script & Screenplay
• Our Editors
• Client Reviews
• Editing & Proofreading Prices
• Wordvice Points
• Partner Discount
• Plagiarism Checker
• APA Citation Generator
• MLA Citation Generator
• Chicago Citation Generator
• Vancouver Citation Generator
• - APA Style
• - MLA Style
• - Chicago Style
• - Vancouver Style
• Writing & Editing Guide
• Academic Resources
• Admissions Resources

How to Write an Abstract for a Research Paper | Examples

What is a research paper abstract?

Research paper abstracts summarize your study quickly and succinctly to journal editors and researchers and prompt them to read further. But with the ubiquity of online publication databases, writing a compelling abstract is even more important today than it was in the days of bound paper manuscripts.

Abstracts exist to “sell”  your work, and they could thus be compared to the “executive summary” of a business resume: an official briefing on what is most important about your research. Or the “gist” of your research. With the majority of academic transactions being conducted online, this means that you have even less time to impress readers–and increased competition in terms of other abstracts out there to read.

The APCI (Academic Publishing and Conferences International) notes that there are  12 questions or “points” considered in the selection process  for journals and conferences and stresses the importance of having an abstract that ticks all of these boxes. Because it is often the ONLY chance you have to convince readers to keep reading, it is important that you spend time and energy crafting an abstract that faithfully represents the central parts of your study and captivates your audience.

With that in mind, follow these suggestions when structuring and writing your abstract, and learn how exactly to put these ideas into a solid abstract that will captivate your target readers.

Before Writing Your Abstract

How long should an abstract be.

All abstracts are written with the same essential objective: to give a summary of your study. But there are two basic styles of abstract: descriptive and informative . Here is a brief delineation of the two:

Of the two types of abstracts, informative abstracts are much more common, and they are widely used for submission to journals and conferences. Informative abstracts apply to lengthier and more technical research and are common in the sciences, engineering, and psychology, while descriptive abstracts are more likely used in humanities and social science papers. The best method of determining which abstract type you need to use is to follow the instructions for journal submissions and to read as many other published articles in those journals as possible.

Research Abstract Guidelines and Requirements

As any article about research writing will tell you, authors must always closely follow the specific guidelines and requirements indicated in the Guide for Authors section of their target journal’s website. The same kind of adherence to conventions should be applied to journal publications, for consideration at a conference, and even when completing a class assignment.

Each publisher has particular demands when it comes to formatting and structure. Here are some common questions addressed in the journal guidelines:

• Is there a maximum or minimum word/character length?
• What are the style and formatting requirements?
• What is the appropriate abstract type?
• Are there any specific content or organization rules that apply?

There are of course other rules to consider when composing a research paper abstract. But if you follow the stated rules the first time you submit your manuscript, you can avoid your work being thrown in the “circular file” right off the bat.

Identify Your Target Readership

The main purpose of your abstract is to lead researchers to the full text of your research paper. In scientific journals, abstracts let readers decide whether the research discussed is relevant to their own interests or study. Abstracts also help readers understand your main argument quickly. Consider these questions as you write your abstract:

• Are other academics in your field the main target of your study?
• Will your study perhaps be useful to members of the general public?
• Do your study results include the wider implications presented in the abstract?

Outlining and Writing Your Abstract

What to include in an abstract.

Just as your  research paper title  should cover as much ground as possible in a few short words, your abstract must cover  all  parts of your study in order to fully explain your paper and research. Because it must accomplish this task in the space of only a few hundred words, it is important not to include ambiguous references or phrases that will confuse the reader or mislead them about the content and objectives of your research. Follow these  dos  and  don’ts  when it comes to what kind of writing to include:

• Avoid acronyms or abbreviations since these will need to be explained in order to make sense to the reader, which takes up valuable abstract space. Instead, explain these terms in the Introduction section of the main text.
• Only use references to people or other works if they are well-known. Otherwise, avoid referencing anything outside of your study in the abstract.
• Never include tables, figures, sources, or long quotations in your abstract; you will have plenty of time to present and refer to these in the body of your paper.

Use keywords in your abstract to focus your topic

A vital search tool is the research paper keywords section, which lists the most relevant terms directly underneath the abstract. Think of these keywords as the “tubes” that readers will seek and enter—via queries on databases and search engines—to ultimately land at their destination, which is your paper. Your abstract keywords should thus be words that are commonly used in searches but should also be highly relevant to your work and found in the text of your abstract. Include 5 to 10 important words or short phrases central to your research in both the abstract and the keywords section.

For example, if you are writing a paper on the prevalence of obesity among lower classes that crosses international boundaries, you should include terms like “obesity,” “prevalence,” “international,” “lower classes,” and “cross-cultural.” These are terms that should net a wide array of people interested in your topic of study. Look at our nine rules for choosing keywords for your research paper if you need more input on this.

Research Paper Abstract Structure

As mentioned above, the abstract (especially the informative abstract) acts as a surrogate or synopsis of your research paper, doing almost as much work as the thousands of words that follow it in the body of the main text. In the hard sciences and most social sciences, the abstract includes the following sections and organizational schema.

Each section is quite compact—only a single sentence or two, although there is room for expansion if one element or statement is particularly interesting or compelling. As the abstract is almost always one long paragraph, the individual sections should naturally merge into one another to create a holistic effect. Use the following as a checklist to ensure that you have included all of the necessary content in your abstract.

1) Identify your purpose and motivation

So your research is about rabies in Brazilian squirrels. Why is this important? You should start your abstract by explaining why people should care about this study—why is it significant to your field and perhaps to the wider world? And what is the exact purpose of your study; what are you trying to achieve? Start by answering the following questions:

• What made you decide to do this study or project?
• Why is this study important to your field or to the lay reader?
• Why should someone read your entire article?

In summary, the first section of your abstract should include the importance of the research and its impact on related research fields or on the wider scientific domain.

2) Explain the research problem you are addressing

Stating the research problem that your study addresses is the corollary to why your specific study is important and necessary. For instance, even if the issue of “rabies in Brazilian squirrels” is important, what is the problem—the “missing piece of the puzzle”—that your study helps resolve?

You can combine the problem with the motivation section, but from a perspective of organization and clarity, it is best to separate the two. Here are some precise questions to address:

• What is your research trying to better understand or what problem is it trying to solve?
• What is the scope of your study—does it try to explain something general or specific?
• What is your central claim or argument?

3) Discuss your research approach

Your specific study approach is detailed in the Methods and Materials section .  You have already established the importance of the research, your motivation for studying this issue, and the specific problem your paper addresses. Now you need to discuss  how  you solved or made progress on this problem—how you conducted your research. If your study includes your own work or that of your team, describe that here. If in your paper you reviewed the work of others, explain this here. Did you use analytic models? A simulation? A double-blind study? A case study? You are basically showing the reader the internal engine of your research machine and how it functioned in the study. Be sure to:

• Detail your research—include methods/type of the study, your variables, and the extent of the work
• Briefly present evidence to support your claim
• Highlight your most important sources

4) Briefly summarize your results

Here you will give an overview of the outcome of your study. Avoid using too many vague qualitative terms (e.g, “very,” “small,” or “tremendous”) and try to use at least some quantitative terms (i.e., percentages, figures, numbers). Save your qualitative language for the conclusion statement. Answer questions like these:

• What did your study yield in concrete terms (e.g., trends, figures, correlation between phenomena)?
• How did your results compare to your hypothesis? Was the study successful?
• Where there any highly unexpected outcomes or were they all largely predicted?

5) State your conclusion

In the last section of your abstract, you will give a statement about the implications and  limitations of the study . Be sure to connect this statement closely to your results and not the area of study in general. Are the results of this study going to shake up the scientific world? Will they impact how people see “Brazilian squirrels”? Or are the implications minor? Try not to boast about your study or present its impact as  too  far-reaching, as researchers and journals will tend to be skeptical of bold claims in scientific papers. Answer one of these questions:

• What are the exact effects of these results on my field? On the wider world?
• What other kind of study would yield further solutions to problems?
• What other information is needed to expand knowledge in this area?

After Completing the First Draft of Your Abstract

Revise your abstract.

The abstract, like any piece of academic writing, should be revised before being considered complete. Check it for  grammatical and spelling errors  and make sure it is formatted properly.

Get feedback from a peer

Getting a fresh set of eyes to review your abstract is a great way to find out whether you’ve summarized your research well. Find a reader who understands research papers but is not an expert in this field or is not affiliated with your study. Ask your reader to summarize what your study is about (including all key points of each section). This should tell you if you have communicated your key points clearly.

In addition to research peers, consider consulting with a professor or even a specialist or generalist writing center consultant about your abstract. Use any resource that helps you see your work from another perspective.

Consider getting professional editing and proofreading

While peer feedback is quite important to ensure the effectiveness of your abstract content, it may be a good idea to find an academic editor  to fix mistakes in grammar, spelling, mechanics, style, or formatting. The presence of basic errors in the abstract may not affect your content, but it might dissuade someone from reading your entire study. Wordvice provides English editing services that both correct objective errors and enhance the readability and impact of your work.

Additional Abstract Rules and Guidelines

Write your abstract after completing your paper.

Although the abstract goes at the beginning of your manuscript, it does not merely introduce your research topic (that is the job of the title), but rather summarizes your entire paper. Writing the abstract last will ensure that it is complete and consistent with the findings and statements in your paper.

Keep your content in the correct order

Both questions and answers should be organized in a standard and familiar way to make the content easier for readers to absorb. Ideally, it should mimic the overall format of your essay and the classic “introduction,” “body,” and “conclusion” form, even if the parts are not neatly divided as such.

Write the abstract from scratch

Because the abstract is a self-contained piece of writing viewed separately from the body of the paper, you should write it separately as well. Never copy and paste direct quotes from the paper and avoid paraphrasing sentences in the paper. Using new vocabulary and phrases will keep your abstract interesting and free of redundancies while conserving space.

Don’t include too many details in the abstract

Again, the density of your abstract makes it incompatible with including specific points other than possibly names or locations. You can make references to terms, but do not explain or define them in the abstract. Try to strike a balance between being specific to your study and presenting a relatively broad overview of your work.

Wordvice Resources

If you think your abstract is fine now but you need input on abstract writing or require English editing services (including paper editing ), then head over to the Wordvice academic resources page, where you will find many more articles, for example on writing the Results , Methods , and Discussion sections of your manuscript, on choosing a title for your paper , or on how to finalize your journal submission with a strong cover letter .    

How to Write an Abstract?

• Open Access
• First Online: 24 October 2021

Cite this chapter

You have full access to this open access chapter

• Samiran Nundy 4 ,
• Atul Kakar 5 &
• Zulfiqar A. Bhutta 6  

56k Accesses

5 Altmetric

An abstract is a crisp, short, powerful, and self-contained summary of a research manuscript used to help the reader swiftly determine the paper’s purpose. Although the abstract is the first paragraph of the manuscript it should be written last when all the other sections have been addressed.

Research is formalized curiosity. It is poking and prying with a purpose. — Zora Neale Hurston, American Author, Anthropologist and Filmmaker (1891–1960)

You have full access to this open access chapter,  Download chapter PDF

Similar content being viewed by others

Writing the Abstract

Abstract and Keywords

Additional Commentaries

1 what is an abstract.

An abstract is usually a standalone document that informs the reader about the details of the manuscript to follow. It is like a trailer to a movie, if the trailer is good, it stimulates the audience to watch the movie. The abstract should be written from scratch and not ‘cut –and-pasted’ [ 1 ].

2 What is the History of the Abstract?

An abstract, in the form of a single paragraph, was first published in the Canadian Medical Association Journal in 1960 with the idea that the readers may not have enough time to go through the whole paper, and the first abstract with a defined structure was published in 1991 [ 2 ]. The idea sold and now most original articles and reviews are required to have a structured abstract. The abstract attracts the reader to read the full manuscript [ 3 ].

3 What are the Qualities of a Good Abstract?

The quality of information in an abstract can be summarized by four ‘C’s. It should be:

C: Condensed

C: Critical

4 What are the Types of Abstract?

Before writing the abstract, you need to check with the journal website about which type of abstract it requires, with its length and style in the ‘Instructions to Authors’ section.

The abstract types can be divided into:

Descriptive: Usually written for psychology, social science, and humanities papers. It is about 50–100 words long. No conclusions can be drawn from this abstract as it describes the major points in the paper.

Informative: The majority of abstracts for science-related manuscripts are informative and are surrogates for the research done. They are single paragraphs that provide the reader an overview of the research paper and are about 100–150 words in length. Conclusions can be drawn from the abstracts and in the recommendations written in the last line.

Critical: This type of abstract is lengthy and about 400–500 words. In this, the authors’ own research is discussed for reliability, judgement, and validation. A comparison is also made with similar studies done earlier.

Highlighting: This is rarely used in scientific writing. The style of the abstract is to attract more readers. It is not a balanced or complete overview of the article with which it is published.

Structured: A structured abstract contains information under subheadings like background, aims, material and methods, results, conclusion, and recommendations (Fig. 15.1 ). Most leading journals now carry these.

Example of a structured abstract (with permission editor CMRP)

5 What is the Purpose of an Abstract?

An abstract is written to educate the reader about the study that follows and provide an overview of the science behind it. If written well it also attracts more readers to the article. It also helps the article getting indexed. The fate of a paper both before and after publication often depends upon its abstract. Most readers decide if a paper is worth reading on the basis of the abstract. Additionally, the selection of papers in systematic reviews is often dependent upon the abstract.

6 What are the Steps of Writing an Abstract?

An abstract should be written last after all the other sections of an article have been addressed. A poor abstract may turn off the reader and they may cause indexing errors as well. The abstract should state the purpose of the study, the methodology used, and summarize the results and important conclusions. It is usually written in the IMRAD format and is called a structured abstract [ 4 , 5 ].

I: The introduction in the opening line should state the problem you are addressing.

M: Methodology—what method was chosen to finish the experiment?

R: Results—state the important findings of your study.

D: Discussion—discuss why your study is important.

Mention the following information:

Important results with the statistical information ( p values, confidence intervals, standard/mean deviation).

Arrange all information in a chronological order.

Do not repeat any information.

The last line should state the recommendations from your study.

The abstract should be written in the past tense.

7 What are the Things to Be Avoided While Writing an Abstract?

Cut and paste information from the main text

Hold back important information

Use abbreviations

Tables or Figures

Generalized statements

Arguments about the study

8 What are Key Words?

These are important words that are repeated throughout the manuscript and which help in the indexing of a paper. Depending upon the journal 3–10 key words may be required which are indexed with the help of MESH (Medical Subject Heading).

9 How is an Abstract Written for a Conference Different from a Journal Paper?

The basic concept for writing abstracts is the same. However, in a conference abstract occasionally a table or figure is allowed. A word limit is important in both of them. Many of the abstracts which are presented in conferences are never published in fact one study found that only 27% of the abstracts presented in conferences were published in the next five years [ 6 ].

Table 15.1 gives a template for writing an abstract.

10 What are the Important Recommendations of the International Committees of Medical Journal of Editors?

The recommendations are [ 7 ]:

An abstract is required for original articles, metanalysis, and systematic reviews.

A structured abstract is preferred.

The abstract should mention the purpose of the scientific study, how the procedure was carried out, the analysis used, and principal conclusion.

Clinical trials should be reported according to the CONSORT guidelines.

The trials should also mention the funding and the trial number.

The abstract should be accurate as many readers have access only to the abstract.

11 Conclusions

An Abstract should be written last after all the other sections of the manuscript have been completed and with due care and attention to the details.

It should be structured and written in the IMRAD format.

For many readers, the abstract attracts them to go through the complete content of the article.

The abstract is usually followed by key words that help to index the paper.

Andrade C. How to write a good abstract for a scientific paper or conference presentation? Indian J Psychiatry. 2011;53:172–5.

Article   Google Scholar  

Squires BP. Structured abstracts of original research and review articles. CMAJ. 1990;143:619–22.

CAS   PubMed   PubMed Central   Google Scholar  

Pierson DJ. How to write an abstract that will be accepted for presentation at a national meeting. Respir Care. 2004 Oct;49:1206–12.

PubMed   Google Scholar  

Tenenbein M. The abstract and the academic clinician. Pediatr Emerg Care. 1995;11:40–2.

Article   CAS   Google Scholar  

Bahadoran Z, Mirmiran P, Kashfi K, Ghasemi A. The principles of biomedical scientific writing: abstract and keywords. Int J Endocrinol Metab. 2020;18:e100159.

PubMed   PubMed Central   Google Scholar  

Grover S, Dalton N. Abstract to publication rate: do all the papers presented in conferences see the light of being a full publication? Indian J Psychiatry. 2020;62:73–9.

Preparing a manuscript for submission to a medical journal. Available on http://www.icmje.org/recommendations/browse/manuscript-preparation/preparing-for-submission.html . Accessed 10 May 2020.

Download references

Author information

Authors and affiliations.

Department of Surgical Gastroenterology and Liver Transplantation, Sir Ganga Ram Hospital, New Delhi, India

Samiran Nundy

Department of Internal Medicine, Sir Ganga Ram Hospital, New Delhi, India

Institute for Global Health and Development, The Aga Khan University, South Central Asia, East Africa and United Kingdom, Karachi, Pakistan

Zulfiqar A. Bhutta

You can also search for this author in PubMed   Google Scholar

Rights and permissions

Open Access This chapter is licensed under the terms of the Creative Commons Attribution 4.0 International License ( http://creativecommons.org/licenses/by/4.0/ ), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

Reprints and permissions

Copyright information

© 2022 The Author(s)

About this chapter

Nundy, S., Kakar, A., Bhutta, Z.A. (2022). How to Write an Abstract?. In: How to Practice Academic Medicine and Publish from Developing Countries?. Springer, Singapore. https://doi.org/10.1007/978-981-16-5248-6_15

Download citation

DOI : https://doi.org/10.1007/978-981-16-5248-6_15

Published : 24 October 2021

Publisher Name : Springer, Singapore

Print ISBN : 978-981-16-5247-9

Online ISBN : 978-981-16-5248-6

eBook Packages : Medicine Medicine (R0)

Share this chapter

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Publish with us

Policies and ethics

• Find a journal
• Track your research

• Privacy Policy

Buy Me a Coffee

Home » Research Paper Abstract – Writing Guide and Examples

Research Paper Abstract – Writing Guide and Examples

Table of Contents

Research Paper Abstract

Research Paper Abstract is a brief summary of a research pape r that describes the study’s purpose, methods, findings, and conclusions . It is often the first section of the paper that readers encounter, and its purpose is to provide a concise and accurate overview of the paper’s content. The typical length of an abstract is usually around 150-250 words, and it should be written in a concise and clear manner.

Research Paper Abstract Structure

The structure of a research paper abstract usually includes the following elements:

• Background or Introduction: Briefly describe the problem or research question that the study addresses.
• Methods : Explain the methodology used to conduct the study, including the participants, materials, and procedures.
• Results : Summarize the main findings of the study, including statistical analyses and key outcomes.
• Conclusions : Discuss the implications of the study’s findings and their significance for the field, as well as any limitations or future directions for research.
• Keywords : List a few keywords that describe the main topics or themes of the research.

How to Write Research Paper Abstract

Here are the steps to follow when writing a research paper abstract:

• Start by reading your paper: Before you write an abstract, you should have a complete understanding of your paper. Read through the paper carefully, making sure you understand the purpose, methods, results, and conclusions.
• Identify the key components : Identify the key components of your paper, such as the research question, methods used, results obtained, and conclusion reached.
• Write a draft: Write a draft of your abstract, using concise and clear language. Make sure to include all the important information, but keep it short and to the point. A good rule of thumb is to keep your abstract between 150-250 words.
• Use clear and concise language : Use clear and concise language to explain the purpose of your study, the methods used, the results obtained, and the conclusions drawn.
• Emphasize your findings: Emphasize your findings in the abstract, highlighting the key results and the significance of your study.
• Revise and edit: Once you have a draft, revise and edit it to ensure that it is clear, concise, and free from errors.
• Check the formatting: Finally, check the formatting of your abstract to make sure it meets the requirements of the journal or conference where you plan to submit it.

Research Paper Abstract Examples

Research Paper Abstract Examples could be following:

Title : “The Effectiveness of Cognitive-Behavioral Therapy for Treating Anxiety Disorders: A Meta-Analysis”

Abstract : This meta-analysis examines the effectiveness of cognitive-behavioral therapy (CBT) in treating anxiety disorders. Through the analysis of 20 randomized controlled trials, we found that CBT is a highly effective treatment for anxiety disorders, with large effect sizes across a range of anxiety disorders, including generalized anxiety disorder, panic disorder, and social anxiety disorder. Our findings support the use of CBT as a first-line treatment for anxiety disorders and highlight the importance of further research to identify the mechanisms underlying its effectiveness.

Title : “Exploring the Role of Parental Involvement in Children’s Education: A Qualitative Study”

Abstract : This qualitative study explores the role of parental involvement in children’s education. Through in-depth interviews with 20 parents of children in elementary school, we found that parental involvement takes many forms, including volunteering in the classroom, helping with homework, and communicating with teachers. We also found that parental involvement is influenced by a range of factors, including parent and child characteristics, school culture, and socio-economic status. Our findings suggest that schools and educators should prioritize building strong partnerships with parents to support children’s academic success.

Title : “The Impact of Exercise on Cognitive Function in Older Adults: A Systematic Review and Meta-Analysis”

Abstract : This paper presents a systematic review and meta-analysis of the existing literature on the impact of exercise on cognitive function in older adults. Through the analysis of 25 randomized controlled trials, we found that exercise is associated with significant improvements in cognitive function, particularly in the domains of executive function and attention. Our findings highlight the potential of exercise as a non-pharmacological intervention to support cognitive health in older adults.

When to Write Research Paper Abstract

The abstract of a research paper should typically be written after you have completed the main body of the paper. This is because the abstract is intended to provide a brief summary of the key points and findings of the research, and you can’t do that until you have completed the research and written about it in detail.

Once you have completed your research paper, you can begin writing your abstract. It is important to remember that the abstract should be a concise summary of your research paper, and should be written in a way that is easy to understand for readers who may not have expertise in your specific area of research.

Purpose of Research Paper Abstract

The purpose of a research paper abstract is to provide a concise summary of the key points and findings of a research paper. It is typically a brief paragraph or two that appears at the beginning of the paper, before the introduction, and is intended to give readers a quick overview of the paper’s content.

The abstract should include a brief statement of the research problem, the methods used to investigate the problem, the key results and findings, and the main conclusions and implications of the research. It should be written in a clear and concise manner, avoiding jargon and technical language, and should be understandable to a broad audience.

The abstract serves as a way to quickly and easily communicate the main points of a research paper to potential readers, such as academics, researchers, and students, who may be looking for information on a particular topic. It can also help researchers determine whether a paper is relevant to their own research interests and whether they should read the full paper.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

How to Cite Research Paper – All Formats and...

Delimitations in Research – Types, Examples and...

Research Paper Format – Types, Examples and...

Research Design – Types, Methods and Examples

Research Paper Title – Writing Guide and Example

Research Paper Introduction – Writing Guide and...

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• Int J Endocrinol Metab
• v.18(1); 2020 Jan

The Principles of Biomedical Scientific Writing: Abstract and Keywords

Zahra bahadoran.

1 Nutrition and Endocrine Research Center, Research Institute for Endocrine Sciences, Shahid Beheshti University of Medical Sciences, Tehran, Iran

Parvin Mirmiran

2 Department of Clinical Nutrition and Human Dietetics, Faculty of Nutrition Sciences and Food Technology, National Nutrition and Food Technology Research Institute, Shahid Beheshti University of Medical Sciences, Tehran, Iran

Khosrow Kashfi

3 Department of Molecular, Cellular and Biomedical Sciences, Sophie Davis School of Biomedical Education, City University of New York School of Medicine, New York, United States

Asghar Ghasemi

4 Endocrine Physiology Research Center, Research Institute for Endocrine Sciences, Shahid Beheshti University of Medical Sciences, Tehran, Iran

An abstract is a self-contained, short, powerful statement that describes a larger body of work. It may be incorporated as part of a published paper, book, grant proposal, thesis, research report, or a conference paper. An abstract of a scientific paper will be published online independently, so it should make sense when it is read alone. An abstract of a hypothesis-testing paper consists of at least four key elements, as follows: (1) study question/hypothesis/aim, (2) experiments/material and methods, (3) results, and (4) response to the question/conclusion(s). The abstract usually begins with a background and may end in applications, recommendations, implications, or speculations. The abstract is one of the many features of a manuscript that competes for the readers’ attention; therefore, it should be informative, accurate, attractive, and concise. Since a huge amount of work must be compressed into a few sentences, writing an abstract may be a difficult task that needs professional skills. Here, we provide a practical guide to writing an abstract and selecting keywords for a hypothesis-testing medical paper.

According to the Merriam Webster dictionary, the word “abstract” is a combination of the Latin root ab-, a prefix meaning “from” or “away,” with the verb trahere, meaning “to pull” or “to draw” and thus, it means “to make a summary”. An abstract is a self-contained, short, powerful statement that describes a larger body of work ( 1 , 2 ). In scientific communications, an abstract is a tool used in a variety of contexts; it is an integral part of a published paper, book, funding proposal, thesis, research report, or a conference paper ( 3 ). In a scientific paper, the abstract is an accurate summary of the main aspects of the entire manuscript, usually in one paragraph of 150 - 300 words, using a simple, clear way of writing ( 4 ). An abstract is a truncated version of the paper that summarizes every aspect of the study ( 5 ).

The traditional form of an abstract first appeared in medical journals in the late 1950s as a descriptive paragraph at the beginning of the paper and then it became more popular ( 3 , 6 , 7 ). The Canadian Medical Association Journal (CMAJ) was one of the early pioneers of this practice in the early 1960s. The journal editors believed that readers did not have enough time and interest to read every paper; thus, the abstract would allow them to assess the study without actually reading the whole paper ( 8 ).

The ability to write an informative, accurate, attractive, and concise abstract is a valuable skill for researchers and writing a good abstract requires a considerable amount of time, effort, practice, mentoring, and patience ( 2 , 3 ). The abstract plays a critical role in “selling” a paper to the prospective readers. A clear abstract can improve the paper search engine rankings and influence whether the user finds it and then decides to navigate to the main article ( 9 ). A well-written abstract represents a more clearly focused study, as well as the experience of the researchers ( 2 ). Despite its critical importance, the power and the role of abstracts on the pre- and post-publication success of papers are generally overlooked and they are usually written prematurely at submission time ( 10 , 11 ). A badly-written and poor-quality abstract will confuse or turn off the potential readers and may also lead database indexers to make indexing errors or omissions ( 11 ).

Following our previous reports on how to write the Introduction ( 12 ), Material and Methods ( 13 ), Results ( 14 ), Discussion ( 15 ), and Title ( 16 ) of a hypothesis-testing paper, here, we provide a practical guide into writing an abstract. An overview is presented on the function, content, and organization of the abstract in a hypothesis-testing paper.

2. The Function of the Abstract

An abstract has three main functions: (1) provides a summary of the paper, (2) “sells” the paper to the editors, reviewers, and potential readers, and (3) helps with the indexing of the paper, making it retrieval by various search engines. As its name suggests, an abstract selects or pulls out the highlights from each section of the paper ( 17 ). The abstract provides a clear summary of the main story for the readers ( 17 ) and helps them to understand the main arguments of the paper quite quickly ( 18 ). An abstract generally answers at least three critical questions including “Why this study was carried out?”, “What did the authors do and how?”, and “What was the main result and what was new compared to previous works?” ( 19 ).

An abstract may critically affect both pre- and post-publication processes of the paper ( 11 ). Journal editors always read the abstract before going through the paper to get an initial impression of the work; moreover, reviewers’ decision on whether they should review a paper or not is almost entirely based on the abstract ( 10 , 11 ). Although a bad abstract may not by own lead to the rejection of a paper, it does, nevertheless, pave the way for a negative response of the editor ( 11 ). The abstract motivates the readers to go through the main text as it is the main mechanism by which readers decide on whether they should obtain and read the full paper ( 4 ).

The abstract is also used for indexing purposes, as most databases enable readers to search abstracts and to have a quick retrieval that limits the extraneous items recalled by a “full-text” search ( 18 ). A poorly-written abstract may lead to indexing errors or make the paper inaccessible in a literature search ( 11 ).

3. Content of the Abstract

The abstract of a hypothesis-testing paper consists of four basic parts: (1) the study question/hypothesis/objective, (2) the experiments/methods conducted to answer the question, (3) the results of the study, and (4) the answer to the question ( 7 , 17 ). Furthermore, the abstract may start with some background information, which will put the current study into perspective ( 20 ). The abstract may, then, end in applications, implications, recommendations, or speculations based on the answer to the question ( 17 ). The basic elements of the abstract of a hypothesis-testing paper are listed in Table 1 .

3.1. Background (Introduction)

The background information should be brief and in harmony with that given in the introduction section of the paper ( 17 ). Similar to the introduction, the background starts with a general topic (what is known in the field) and knowledge gap or problem, and narrows down to a specific topic (study question/hypothesis) of the study ( 4 ) (for more details see ( 12 ). The beginning can be more interesting by creating stress, e.g., by making a statement followed by “however” or “but” and then “stating a problem”, “contradiction”, or “gap in knowledge” ( 7 ). Addressing the author’s previous work in the background section of the abstract makes it annoying ( 4 ).

3.2. Hypothesis/Question

Study question/hypothesis or objective is a clear statement of the main aim of the study and major hypothesis tested or research question posted ( 21 ). Without addressing the study question/hypothesis, the abstract is meaningless and lacks an anchor for understanding the methods or the results ( 22 ). For questions including both an independent variable (X) and a dependent variable (Y), the question should be stated clearly using a verb to relate the independent and dependent variables, e.g., to determine whether X causes Y ( 17 ). For questions with only a dependent variable, the specific aspect of the dependent variable studied must be stated ( 17 ).

3.3. Experiments/Materials and Methods

To address the materials and methods used, essential and more important details are enough to indicate “how the hypothesis was tested” ( 4 , 17 ), including design, setting, subjects/participants, interventions (if any), the main outcome (s) ( 7 , 21 ), and a brief description of statistical methods ( 4 ). The experimental approach or the study design, including both independent and dependent variables, is also needed ( 17 ). When authors address the study setting, they need to give general rather than specific information (e.g., instead of naming the center, they can give the geographical location if it is important) ( 21 ). Describing standard techniques such as ELISA, PCR, etc. should be avoided ( 4 ). If the methodology is unique or of interest, addressing the methodological aspects of the study may be appropriate ( 2 ).

3.4. Results

Not all results, but only the most pertinent (those answering the question) are presented in the abstract ( 4 , 17 ). The main findings should be presented, not as general and broad statements but as specific results/data and their statistical significance (absolute numbers, percentages, means, coefficients, ratios, P values, confidence intervals) ( 2 , 23 ). A common flaw in abstracts is the inclusion of P values without providing the data; P values alone are not useful ( 17 ). Giving a P value should be accompanied by the mean, standard deviation, and sample size ( 17 ). Provide percent change rather than actual values (e.g. mean and standard deviation) when a quantitative idea of the data is approached ( 4 , 17 ). To make the abstract more efficient, details of the experiment (e.g., duration of the study, dependent variables) may be included in the statements of the results ( 17 ). Referring to data that are presented later in the manuscript should be avoided ( 4 ).

The results presented in the abstract should be arranged in a logical order, including chronological order and importance order (most-to-least or least-to-most important) ( 17 ). In the most-to-least important order, the experimental results come first and the control results are presented last. Similarly, variables that have changed come before variables that did not change ( 17 ). Another logical order is that the details of the results be presented in the same order as the details in the study question ( 17 ); for example, if the question is “whether lesions of the nucleus tractus solitarius alter pulmonary artery pressure and pulmonary lymph flow without altering the systemic circulation”, so the results can be organized in the same order, first pulmonary artery pressure, next pulmonary lymph flow, and last systemic circulatory variables ( 17 ).

The study groups should be named clearly, e.g. intervention or controls. If baseline/pretreatment characteristics of the study participants are similar between the groups, there is no need to show all of them for each group; overall key median or mean values would suffice with a statement NS, i.e. non-significant ( 24 ).

3.5. Answer and Its Importance/Conclusion(s)

The answer to the question should be supported by data and must not go beyond the data presented ( 4 ). In this section, the authors need to state whether the hypothesis is accepted or rejected based on the data presented ( 4 ). The conclusions should be straightforward, brief, and specific to the study findings/observations ( 24 ). If word limit permits, the conclusion may begin with an opening statement such as “Our study showed …” or “Our results indicated…”. New and important aspects of the study or observations need to be emphasized ( 23 ). The answer should not be just a restatement of the results and no data should be presented here ( 4 ). To answer the question, use the same key-terms, point of view, and verb as in the question ( 17 ).

In the final sentence, state the importance of the work, e.g., if the conclusion (s) leads to change (s) in concept or the understanding of the field ( 4 ). This can be presented by stating the applications, recommendations, implications, or speculations that are based on the findings ( 17 ). Expressing the importance of the work should not be replaced with the answer to the question ( 17 ). Try to avoid any broad/general statements about the need for more research ( 2 ); instead, give explicit recommendations for further studies if warranted ( 15 ). Authors are advised to be specific and focused on their findings, do not overestimate the importance of them, and avoid broad claims and strong statements since even pioneering breakthrough studies require independent confirmation ( 24 ).

3.6. Others

The International Committee of Medical Journal Editors (ICMJE, www.icmje.org) recommends that, if applicable, journals should include the clinical trial registration number at the end of the abstract ( 25 ). Furthermore, funding sources are also proposed to be listed separately after the abstract to facilitate proper display and indexing for search retrieval by MEDLINE ( 26 ).

It is suggested that abstracts do not include figures, tables, or citations to previous works ( 17 ). If authors are convinced that the abstract must include a reference to significant previous work, they should give the full reference because the abstract will stand alone in abstracting publications ( 27 ).

4. Organization of the Abstract

Similar to the text of the paper, an informative abstract is organized in the following order: background (if any), question, experiments, results, answer to the question, and importance of the work (by stating applications, recommendations, implications, or speculations) ( 17 ). Journals may favor an unstructured abstract, which is just a conventional abstract with running text; or they may prefer a more structured format that has distinct labeled sections ( 28 ). Historically, because almost all published papers did not provide any essential details in their abstracts, Ertl and Gazette in 1969 proposed that for all medical, clinical, and experimental papers, the important contents should be presented in a tabular format ( 29 ). After several revisions ( 30 , 31 ), “a more informative” abstract for articles of medical/clinical journals was defined with subheadings for background, objective, design, setting, participants, interventions (if any), outcomes, results, and conclusions ( 28 ). In 1993, ICMJE recommended the use of structured abstracts ( 23 ). The percentage of published papers in medical journals containing structured abstracts increased from 2.5% in 1992 to 20.3% in 2005 ( 32 ) and this number rose to more than 30% in 2010 ( 33 ).

Compared to the traditional format, structured abstracts provide more details, with clear headings for the main components of the abstract ( 30 , 31 , 34 ). This format also enables the readers to quickly judge about applicability and validity of the findings for clinical practice ( 30 ). Structured abstracts are also easier to search and more simple to read, and are generally welcomed by readers and authors ( 35 ). The structured abstract, however, has been criticized for its greater length and its imposed style and rigid uniformity that may inhibit author creativity and may bore the reader ( 27 ).

To organize a structured abstract, a factual standard reflecting the process of scientific discovery i.e. “Introduction-Methods-Results-Conclusions” is commonly recommended by medical journals (e.g. New England Journal of Medicine, The Lancet, Archives of Internal Medicine, American Journal of Medicine) ( 36 , 37 ). Other patterns of subheadings are also recommended, e.g., the 8-heading format proposed by Haynes et al. ( 30 ); a more frequent non-IMRAD (Introduction, Methods, Results, and Discussion) format ( 37 ) is also used by some journals (e.g., BMJ, Journal of American Medical Association, Annual Review of Medicine). The ICMJE does acknowledge that the format of structured abstracts may differ amongst journals ( 25 ). Many reporting guidelines now recommend specific abstract formats depending on the study design, such as systematic reviews and randomized trials ( 28 , 38 , 39 ).

5. Features of a Well-Written Abstract

The ICMJE recommends that the abstract should emphasize new and important aspects of the study or observations, and not overinterpret the findings ( 25 ). A good abstract is simple, specific, clear, unbiased, honest, concise, precise, complete, and (preferably) structured ( 40 ). Since readers may never read further than the abstract, it should provide a general understanding of what was studied, how the study was done, what was found, and what conclusions were drawn. A well-written and informative abstract stands on its own, apart from the rest of the manuscript ( 4 , 17 ). It, however, should be consistent with the main text and exhibit the key message (s) of the paper ( 40 ). An important feature of a well-written abstract is the following of a consistent story or keeping continuity, defined as moving smoothly from the background information to the conclusion ( 17 ). Of course, a good abstract must be based on data already collected and analyzed. Reading abstracts from recent issues of the target journal may also provide some helpful hints ( 2 ). Some general tips to write an effective abstract are provided in Table 2 .

6. The Procedure for Writing an Effective Abstract

The abstract is written after completing all experiments and interpreting the data ( 4 ). Writing an abstract requires careful, logical, and clear thinking. To draft an abstract, a stepwise process needs to be followed ( 28 ). Planning, drafting, reviewing, peer-reviewing, editing, and packaging are proposed as essential steps of developing an abstract ( 2 , 41 ). Overall, the initial step is to consider the manuscript entirely and select key contents, weight the importance of each word, and iteratively polish the story ( 28 ). In drafting an abstract, a practical and efficient suggestion is to copy and paste from the main text. Thus, 2 - 3 key sentences can be selected each from the introduction, material and methods, and discussion (mainly the first or the concluding paragraph), and several sentences from the results (including statistical analysis) ( 28 ). Next, the obtained unfocused and disorganized text needs to be extensively edited by removing unnecessary details and extra words to provide coherence and a natural flow ( 28 ).

The first draft is proposed to be set aside for 1 - 2 days (a short resting period) and then, the authors need to edit it again; they can send it for peer review by an unbiased outsider (e.g., a colleague, advisor, other mentors) to give thoughtful, concise, and honest criticism of the work ( 2 ). After careful consideration of the comments, the authors can promote their work and prepare the final draft ( 2 ). The final step that needs to be considered is packaging, which is done by following the journal style and a final check for possible misspelled words, incorrect grammar, exceeding the word count, and failure to comply with size and font specifications ( 2 ).

7. Most Common Flaws and Mistakes in Writing an Abstract

Taking a look at the common mistakes and flaws of the published abstracts (extensively discussed elsewhere ( 11 , 17 )) is helpful to make an effective abstract. In brief, these weaknesses include omitting or vaguely stating the question, stating an application/implication instead of an answer, and substituting a descriptive abstract for a hypothesis-testing study ( 17 ). Missing important information, exceeding the word limits, providing extraneous information (e.g., literature findings around the topic), lacking appropriate organization, and overstating the data are other common mistakes that are generally seen in poorly written abstracts ( 11 ). Apart from content mistakes, there are also two other common mistakes that are generally made in writing an abstract for a scientific paper. These are formal aspects (e.g., the layout of the abstract, its structure and length) and linguistic-stylistic aspects (grammar and spelling, stylistics and punctuation) ( 42 ). The typical characteristics of a poorly-written abstract include not being self-sufficient, being like an introduction rather than a summary, containing irrelevant details, and not giving any background information ( 19 ). Other common flaws include misleading reporting, misleading interpretation and inadequate extrapolation of the results, using causal language, linguistic spin, inadequate statement of implications for clinical practice, and absence of negative results ( 43 ). Some common flaws and mistakes in writing an abstract are provided in Box 1 .

8. Abstract for a Scientific Meeting

The selection of presentations in scientific meetings is based on abstracts ( 4 ) and the main function of a meeting abstract is, therefore, to showcase the author’s valuable contribution and to highlight the work for attracting audiences ( 10 , 17 ). Writing a meeting abstract needs to follow the same guidelines as abstracts for papers, except that it is likely to include more details of the methods and to display data in a table or a graph ( 17 ). More details regarding writing an effective and informative abstract for a meeting are presented elsewhere ( 17 , 45 , 46 ).

9. Keywords

At the end of the abstract, 3 to 10 keywords or short phrases are usually provided that are used for cross-indexing so that various search engines can retrieve the paper. Keywords are proposed to be obtained through the Medical Subject Headings (MeSH) list of Index Medicus ( 23 ). It is suggested that keywords be different from the words that are within the main title; however, they can be variants of the terms/phrases that are used in the title, the abstract, and the main text ( 40 ). Effective keywords are those that are familiar within the field and are specific to the paper (i.e., terms used more than twice in the text) ( 10 ). Listing very general terms as keywords is not recommended (e.g., protein or DNA) because they are not helpful ( 10 ). A practical guide to choosing effective keywords is to list the main related keywords and then, doing a search using the same words to verify whether they are effective in retrieving appropriate papers within the field of interest ( 10 ). Authors can also use the “MeSH on-demand” browser for selecting keywords (https://meshb.nlm.nih.gov/MeSHonDemand).

10. Conclusion

Overall, a well-written abstract should accurately summarize the main aspects of the full paper. It should be simple, clear, unbiased, honest, concise, precise, stand-alone, complete, and preferably structured. The first impressions that an abstract makes may go a long way towards the decisions made by the editors and the reviewers of the paper. Also, the post-publication success of the paper, such as citation performance, is also affected by the abstract. The ability to make an informative and accurate abstract, including a concise and clear statement of the problem/gap of knowledge, the motivation behind the research, the study question/hypothesis, enough description of the experiments, novel results, and a captivating conclusion, is a critical skill with broad implications. Authors, therefore, need to follow available guidelines and journal’s guide for authors to arrange a strong and convincing abstract.

Authors' Contribution: Study concept and design: Zahra Bahadoran and Asghar Ghasemi; drafting of the manuscript: Zahra Bahadoran, Parvin Mirmiran, and Asghar Ghasemi; critical revision of the manuscript for important intellectual content: Khosrow Kashfi and Parvin Mirmiran.

Conflict of Interests: The authors have no conflict of interest.

Funding Support: This study was supported by the Research Institute for Endocrine Sciences, Shahid Beheshti University of Medical Sciences.

• EXPLORE Random Article

How to Write a Scientific Abstract

Last Updated: March 29, 2019 Approved

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 10 people, some anonymous, worked to edit and improve it over time. wikiHow marks an article as reader-approved once it receives enough positive feedback. This article received 13 testimonials and 90% of readers who voted found it helpful, earning it our reader-approved status. This article has been viewed 161,345 times.

A scientific abstract summarizes your research paper or article in a concise, clearly written way that informs readers about the article's content. Researchers use abstracts to determine whether a paper is relevant to their work and/or decide which papers to acquire and read. For academic conferences, participants only receive copies of the abstracts in proceedings. When readers search through electronic databases for articles, the abstract is usually the sole part of the paper that they see without cost. Typically 200-250 words, a scientific abstract consists of five key parts: title and author information, background, methods, results, and conclusions. [1] X Trustworthy Source PubMed Central Journal archive from the U.S. National Institutes of Health Go to source

Preparing to Write an Abstract

Structuring an Abstract

• Think of the research paper as having investigated a particular scientific question. Other researchers will value knowing your research question.
• Your background section should answer questions like: What did I study? Why is my research question important? What did my field of study know about my research question before I did this study? How will this study advance knowledge in our field? [6] X Trustworthy Source PubMed Central Journal archive from the U.S. National Institutes of Health Go to source
• Try to use an active voice and reduce passive language throughout your abstract. For example, write: "I interviewed Cassandra" instead of "Cassandra was interviewed by me."
• Minimize use of pronouns like "I" or "we." Write about "the study," "this paper examines," or "this research" instead of "my study" or "I write about..."
• Keep your abstract in the past or present tense but not in the future. For instance, do not write: "this paper will examine" but "this paper examines" or "the results showed."

• What was the research design?
• How long did the study last?
• What was the sample size?
• How did you recruit participants?
• What was the research setting? [7] X Trustworthy Source PubMed Central Journal archive from the U.S. National Institutes of Health Go to source

• Some organizations, journals, or conferences require a special format for the title, which could be all uppercase letters, bolded, or italics. [12] X Research source www.med.upenn.edu/focus/.../WritingaResearchAbstract_CompI-B.doc

Checking Style and Flow

• Read the abstract as if you were another researcher deciding whether to read your paper. Do you find the abstract has the right information to help you decide whether to read it? If not, ask yourself what is missing.

• Be sure to place commas and periods within quotation marks, e.g. "Milton said." instead of "Milton said".
• Do not end sentences with prepositions (of, for, about).
• Vary your verbs and nouns from sentence to sentence and use a print or online thesaurus for synonyms in order to not sound repetitive.
• Avoid vague adjectives like "very" and "many." Try to quantify your findings with specific numbers or conditions that offer comparisons. For example, "135 interlocutors participated" or "Subject A's performance was thirty percent better than Subject B's performance."
• Written years should not have apostrophes. Thus, write "1990s" rather than "1990's."
• Eliminate unnecessary content and add any missing important pieces of information. [13] X Research source

Community Q&A

• Do not include references to other papers, non-standard abbreviations, or any kinds of illustrations. For abbreviations you do include, always spell them out the first time you use them unless they are in common use. [14] X Research source www.acponline.org/residents_fellows/competitions/abstract/prepare/res_abs.htm Thanks Helpful 2 Not Helpful 0
• Review the abstract guidelines for the specific journal or scholarly discipline for which you are writing. Most disciplines (e.g. biology or sociology) have their own stylistic conventions for abstracts. Use other abstracts from your field as examples for style. Thanks Helpful 2 Not Helpful 0
• If you write an abstract for a research paper that you did not write, remember that it is not your job to review the paper, criticize its methods, or offer your opinion on the importance or relevance of the research. Thanks Helpful 1 Not Helpful 2

You Might Also Like

• ↑ http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3136027/
• ↑ https://owl.english.purdue.edu/owl/resource/706/1/
• ↑ www.med.upenn.edu/focus/.../WritingaResearchAbstract_CompI-B.doc
• ↑ http://abacus.bates.edu/~ganderso/biology/resources/writing/HTWsections.html#abstract
• ↑ www.acponline.org/residents_fellows/competitions/abstract/prepare/res_abs.htm

About this article

When you write an academic abstract, start with 1 to 3 introductory sentences that explain the study’s topic, purpose, and research questions. Then, follow up with 2 to 3 sentences on how you conducted your study, including its duration and sample size. Next, write 1 to 2 sentences on the results of the study. Finally, conclude with 1 to 2 sentences on the main point and impact of the research. To learn how to choose a title and edit your work, scroll down . . . Did this summary help you? Yes No

Reader Success Stories

Andoni Henderer

Dec 11, 2016

Did this article help you?

Eric Murillo

May 30, 2018

Ncanyane D. Leburu

Aug 13, 2017

Jane Bongiorno

Oct 13, 2016

May 31, 2016

• About wikiHow
• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

A case study on the relationship between risk assessment of scientific research projects and related factors under the Naive Bayesian algorithm

Affiliations.

• 1 Institute of Policy Studies, Lingnan University, Tuen Mun, 999077, Hong Kong, China.
• 2 Institute of Policy Studies, Lingnan University, Tuen Mun, 999077, Hong Kong, China. [email protected].
• PMID: 38589465
• PMCID: PMC11002027
• DOI: 10.1038/s41598-024-58341-y

This paper delves into the nuanced dynamics influencing the outcomes of risk assessment (RA) in scientific research projects (SRPs), employing the Naive Bayes algorithm. The methodology involves the selection of diverse SRPs cases, gathering data encompassing project scale, budget investment, team experience, and other pertinent factors. The paper advances the application of the Naive Bayes algorithm by introducing enhancements, specifically integrating the Tree-augmented Naive Bayes (TANB) model. This augmentation serves to estimate risk probabilities for different research projects, shedding light on the intricate interplay and contributions of various factors to the RA process. The findings underscore the efficacy of the TANB algorithm, demonstrating commendable accuracy (average accuracy 89.2%) in RA for SRPs. Notably, budget investment (regression coefficient: 0.68, P < 0.05) and team experience (regression coefficient: 0.51, P < 0.05) emerge as significant determinants obviously influencing RA outcomes. Conversely, the impact of project size (regression coefficient: 0.31, P < 0.05) is relatively modest. This paper furnishes a concrete reference framework for project managers, facilitating informed decision-making in SRPs. By comprehensively analyzing the influence of various factors on RA, the paper not only contributes empirical insights to project decision-making but also elucidates the intricate relationships between different factors. The research advocates for heightened attention to budget investment and team experience when formulating risk management strategies. This strategic focus is posited to enhance the precision of RAs and the scientific foundation of decision-making processes.

Keywords: Data-driven decision-making; Decision support; Factor analysis; Naive Bayesian algorithm; Probability estimation; Risk assessment; Scientific research projects.

© 2024. The Author(s).

Help | Advanced Search

Computer Science > Computation and Language

Title: leave no context behind: efficient infinite context transformers with infini-attention.

Abstract: This work introduces an efficient method to scale Transformer-based Large Language Models (LLMs) to infinitely long inputs with bounded memory and computation. A key component in our proposed approach is a new attention technique dubbed Infini-attention. The Infini-attention incorporates a compressive memory into the vanilla attention mechanism and builds in both masked local attention and long-term linear attention mechanisms in a single Transformer block. We demonstrate the effectiveness of our approach on long-context language modeling benchmarks, 1M sequence length passkey context block retrieval and 500K length book summarization tasks with 1B and 8B LLMs. Our approach introduces minimal bounded memory parameters and enables fast streaming inference for LLMs.

Submission history

Access paper:.

• HTML (experimental)
• Other Formats

References & Citations

• Google Scholar
• Semantic Scholar

BibTeX formatted citation

Bibliographic and Citation Tools

Code, data and media associated with this article, recommenders and search tools.

• Institution

arXivLabs: experimental projects with community collaborators

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs .

• News & Media
• Chemical Biology
• Computational Biology
• Ecosystem Science
• Cancer Biology
• Exposure Science & Pathogen Biology
• Metabolic Inflammatory Diseases
• Advanced Metabolomics
• Mass Spectrometry-Based Measurement Technologies
• Spatial and Single-Cell Proteomics
• Structural Biology
• Biofuels & Bioproducts
• Human Microbiome
• Soil Microbiome
• Synthetic Biology
• Computational Chemistry
• Chemical Separations
• Chemical Physics
• Atmospheric Aerosols
• Human-Earth System Interactions
• Modeling Earth Systems
• Coastal Science
• Plant Science
• Subsurface Science
• Terrestrial Aquatics
• Materials in Extreme Environments
• Precision Materials by Design
• Science of Interfaces
• Friction Stir Welding & Processing
• Dark Matter
• Flavor Physics
• Fusion Energy Science
• Neutrino Physics
• Quantum Information Sciences
• Emergency Response
• AGM Program
• Tools and Capabilities
• Grid Architecture
• Grid Cybersecurity
• Grid Energy Storage
• Earth System Modeling
• Energy System Modeling
• Transmission
• Distribution
• Appliance and Equipment Standards
• Building Energy Codes
• Advanced Building Controls
• Advanced Lighting
• Building-Grid Integration
• Building and Grid Modeling
• Commercial Buildings
• Federal Performance Optimization
• Resilience and Security
• Grid Resilience and Decarbonization
• Building America Solution Center
• Energy Efficient Technology Integration
• Home Energy Score
• Electrochemical Energy Storage
• Flexible Loads and Generation
• Grid Integration, Controls, and Architecture
• Regulation, Policy, and Valuation
• Science Supporting Energy Storage
• Chemical Energy Storage
• Waste Processing
• Radiation Measurement
• Environmental Remediation
• Subsurface Energy Systems
• Carbon Capture
• Carbon Storage
• Carbon Utilization
• Advanced Hydrocarbon Conversion
• Fuel Cycle Research
• Advanced Reactors
• Reactor Operations
• Reactor Licensing
• Solar Energy
• Wind Resource Characterization
• Wildlife and Wind
• Community Values and Ocean Co-Use
• Wind Systems Integration
• Wind Data Management
• Distributed Wind
• Energy Equity & Health
• Environmental Monitoring for Marine Energy
• Marine Biofouling and Corrosion
• Marine Energy Resource Characterization
• Testing for Marine Energy
• The Blue Economy
• Environmental Performance of Hydropower
• Hydropower Cybersecurity and Digitalization
• Hydropower and the Electric Grid
• Materials Science for Hydropower
• Pumped Storage Hydropower
• Water + Hydropower Planning
• Grid Integration of Renewable Energy
• Geothermal Energy
• Algal Biofuels
• Aviation Biofuels
• Waste-to-Energy and Products
• Hydrogen & Fuel Cells
• Emission Control
• Energy-Efficient Mobility Systems
• Lightweight Materials
• Vehicle Electrification
• Vehicle Grid Integration
• Contraband Detection
• Pathogen Science & Detection
• Explosives Detection
• Threat-Agnostic Biodefense
• Discovery and Insight
• Proactive Defense
• Trusted Systems
• Nuclear Material Science
• Radiological & Nuclear Detection
• Nuclear Forensics
• Ultra-Sensitive Nuclear Measurements
• Nuclear Explosion Monitoring
• Global Nuclear & Radiological Security
• Disaster Recovery
• Global Collaborations
• Legislative and Regulatory Analysis
• Technical Training
• Additive Manufacturing
• Deployed Technologies
• Rapid Prototyping
• Systems Engineering
• 5G Security
• RF Signal Detection & Exploitation
• Climate Security
• Internet of Things
• Maritime Security
• Artificial Intelligence
• Graph and Data Analytics
• Software Engineering
• Computational Mathematics & Statistics
• High-Performance Computing
• Visual Analytics
• Lab Objectives
• Publications & Reports
• Featured Research
• Diversity, Equity, Inclusion & Accessibility
• Lab Leadership
• Lab Fellows
• Staff Accomplishments
• Undergraduate Students
• Graduate Students
• Post-graduate Students
• University Faculty
• University Partnerships
• K-12 Educators and Students
• STEM Workforce Development
• STEM Outreach
• Meet the Team
• Internships
• Regional Impact
• Philanthropy
• Volunteering
• Available Technologies
• Industry Partnerships
• Licensing & Technology Transfer
• Entrepreneurial Leave
• Atmospheric Radiation Measurement User Facility
• Electricity Infrastructure Operations Center
• Energy Sciences Center
• Environmental Molecular Sciences Laboratory
• Grid Storage Launchpad
• Institute for Integrated Catalysis
• Interdiction Technology and Integration Laboratory
• PNNL Portland Research Center
• PNNL Seattle Research Center
• PNNL-Sequim (Marine and Coastal Research)
• Radiochemical Processing Laboratory
• Shallow Underground Laboratory

Partnership for Radiation Studies (PaRS): A Consortium for Advancing Radiation Science among Underrepresented STEM Students

Published: April 17, 2024

Research topics

Maintenance work is planned for Wednesday 1st May 2024 from 9:00am to 11:00am (BST).

During this time, the performance of our website may be affected - searches may run slowly and some pages may be temporarily unavailable. If this happens, please try refreshing your web browser or try waiting two to three minutes before trying again.

We apologise for any inconvenience this might cause and thank you for your patience.

Environmental Science: Water Research & Technology

2023 outstanding papers published in the environmental science journals of the royal society of chemistry.

a Hong Kong Baptist University, Hong Kong, China

b Carnegie Mellon University Department of Chemistry, Pittsburgh, PA, USA

c Department of Civil and Resource Engineering, Dalhousie University, Halifax, Nova Scotia, Canada

d Lancaster Environment Centre, Lancaster University, UK

e Universidade Católica Portuguesa, Portugal

f Harvard John A. Paulson School of Engineering and Applied Science, Harvard University, Cambridge, USA

g Department of Civil and Environmental Engineering, Virginia Tech, Blacksburg, Virginia, USA

A graphical abstract is available for this content

• This article is part of the themed collection: Outstanding Papers 2023 – Environmental Science: Water Research & Technology

Article information

Download citation, permissions.

Z. Cai, N. Donahue, G. Gagnon, K. C. Jones, C. Manaia, E. Sunderland and P. J. Vikesland, Environ. Sci.: Water Res. Technol. , 2024, Advance Article , DOI: 10.1039/D4EW90011A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page .

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page .

Read more about how to correctly acknowledge RSC content .

Social activity

Search articles by author.

This article has not yet been cited.

Advertisements

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

• View all journals
• Explore content
• About the journal
• Publish with us
• Sign up for alerts

JSH2024 Fukuoka Call for Abstracts and HR Fast track!

Do not miss the chance to present your research at jsh2024 and get the “rapid peer review process” for hypertension research, here is call for abstracts , quick links.

• Explore articles by subject
• Guide to authors
• Editorial policies

An official website of the United States government

Here’s how you know

Official websites use .gov A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS A lock ( Lock A locked padlock ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

JavaScript appears to be disabled on this computer. Please click here to see any active alerts .

EPA Scientists Contribute to Paper in Nature that Shows Common Household Chemicals May Disrupt Brain Development

Published April 16, 2024

There are many existing chemicals that have incomplete data about their potential toxicity and effects on human health. Children are a particularly susceptible population and chemical exposure can disrupt critical periods in their development, especially brain development.

EPA scientists contributed to the development of data on over 1,800 compounds using a high-throughput developmental screen. Their research determined that quaternary compounds, a class of chemicals that are common in personal care products and disinfectants, may disrupt brain development in children. The findings were published in Nature .

High-throughput screening is a process that allows scientists to quickly test chemicals to see how they interact with a specific biological target or cell type. After screening over 1,800 compounds, researchers identified quaternary compounds as a class that may affect oligodendrocytes by impacting cell health. Oligodendrocytes are a type of cell in the central nervous system. Oligodendrocytes play an important role in neuron function and longevity and their disruption can lead to cognitive and motor disability. Additionally, some organophosphate flame retardants disrupted oligodendrocyte growth in a cell-based, in vitro model. Organophosphate flame retardants are commonly found in household items such as furniture and electronics.

While oligodendrocytes are crucial for brain development, their susceptibility to various chemicals has been studied less than other brain cells, such as neurons. This high-throughput screen is a first step in identifying chemicals that may affect oligodendrocyte development and shows how these methods can be used to identify potentially toxic chemicals quickly and efficiently.

The study suggests quaternary compounds and organophosphate flame retardants impact oligodendrocyte health in in vitro models, but further research is needed to confirm effects and determine the full impact of exposure. High-throughput screening is a powerful tool but it is only one part of EPA’s tiered toxicity testing strategy that prioritizes chemicals based on bioactivity so they can be tested with more traditional methods.

EPA scientists are leading and contributing to chemical safety research as part of their mission to protect human health and the environment.

Learn more about the science:

• Evaluating the Effects of Chemicals on Nervous System Development
• High-Throughput Toxicology
• Understanding Exposures in Children’s Environments
• Assessing and Managing Chemicals under TSCA
• Science Matters Home
• Researchers at Work Profiles
• All Stories