smart objectives dissertation examples

• How it works

How to Write the Dissertation Aims and Objectives – Guide & Examples

Published by Grace Graffin at January 27th, 2023 , Revised On October 9, 2023

Aims and objectives are among the essential aspects of a dissertation. If you write aims and objectives effectively, they can act as a foundation to give your research clarity and focus.

This article will provide you with all the necessary information regarding aims and objectives, their differences, writing tips , and the common mistakes you should avoid while writing them.

The aim is often a single sentence or a short paragraph that describes your dissertation’s main goal and intent. It tells what you hope to achieve at the end. You should write the aim so that it becomes identifiable when it is achieved with the completion of your dissertation .

The aim is written in a subsection of the introduction to clarify the overall purpose of the dissertation .

Example: It is often observed that employees in culturally diverse workplaces struggle to work effectively in a team. A probable cause of this issue is bullying at the workplace. This research investigates the impact of bullying on employee job satisfaction at culturally diverse workplaces and the resulting loss of employee productivity. This research will use surveys and case study analysis to analyze the impact of bullying on employees.

The objectives in a dissertation describe the ways through which you intend to achieve the research aim. They are specific statements that break down the aim into several smaller key sections of the overall research. Suitable objectives can help you stay focused and conduct research in the direction of your aim.

The number of objectives should be realistic; usually, between three to six, and each one should be possible to achieve. The following example shows the objectives for the previously-mentioned dissertation aim.

1. identification of the behaviors that are considered as bullying 2. exploring the factors that cause bullying at a culturally diverse workplace 3. analyzing the relationship between bullying and job satisfaction of employees 4. providing suitable recommendations on minimizing the bullying at the workplace

The objectives of a dissertation should be SMART.

• Specific: should be precise, focused, and well-defined
• Measurable: the progress should be measurable, and you should be able to determine when you have achieved an objective.
• Achievable: you should be able to carry out the required action within your available resources
• Relevant: should be related to the dissertation aim
• Time-bound: should be possible within the available time

Differences between aims and objectives

Aims and objectives are often mixed, but there are clear differences between them.

Hire an Expert Writer

Orders completed by our expert writers are

• Formally drafted in an academic style
• Free Amendments and 100% Plagiarism Free – or your money back!
• 100% Confidential and Timely Delivery!
• Free anti-plagiarism report
• Appreciated by thousands of clients. Check client reviews

How to write aims and objectives?

There is no particular way or standard to write the aims and objectives. Different researchers have different writing styles, and often it can be influenced by your research supervisor. However, you should follow certain basic principles while writing aims and objectives in a dissertation.

Writing the aim statement

The aim statement should cover the following essential elements.

• Why is the research necessary? (covers the underlying problem on which the study is to be conducted)
• What is the research about? (description of the research title)
• How are you going to conduct it? (a brief statement of intended research methods)

An appropriate aim clearly defines the research purpose without confusing the reader. If you struggle to explain your research and its importance in simpler terms, you should consider refining your research to clarify it further.

Writing objectives

The objectives describe how you would achieve your research aim. You can do this through the following steps,

• The first one to two objectives can be applied to the literature review . (Verbs to be used: investigate, examine, study)
• One objective can be applied to the methodology portion. (Verbs to be used: collect, select, demonstrate, estimate)
• Two to three objectives can cover the critical evaluation or discussion chapters (Verbs to be used: analyze, compare, evaluate)
• The final objective will cover the conclusion or recommendation portion. (Verbs to be used: conclude, recommend)

Instead of writing like a paragraph, the objectives should be written as a numbered list to give them more clarity.

How many aims and objectives should be there?

It depends upon the topic of your research and mainly upon your supervisor’s requirements. Generally, a dissertation has a single broad statement as the research aim. However, it is acceptable to include a main aim along with two to three subsidiary aims.

Similarly, the number of objectives should be realistic and sufficient to measure the progress regarding the achievement of the research aim. Their number can generally vary from three to six depending upon the aim.

Common mistakes to avoid while writing research aims and objectives

• Writing a broad research aim

Writing a broad research aim is a common mistake, and it often becomes difficult to achieve. It may create a problem when you are asked to prove how you have achieved your aims during your  viva defense . It would be best to narrow your study to a specific area in the early stages of the dissertation.

• Formulating overlapping research objectives

The objectives should be written such that they are measurable and distinct from each other. If they overlap, it makes it difficult to structure your dissertation properly in specific chapters.

• Setting unrealistic aims

Students often get over-ambitious while describing the research aim and face problems afterward in achieving those aims. You should avoid this mistake and be realistic about what you can achieve in the available time and resources.

Aims and objectives are the sections that require significant time and attention to avoid future hassles while conducting research and writing your dissertation.

Frequently Asked Questions

How to set dissertation aims and objectives.

To set dissertation aims and objectives, define your research goals clearly. Aims state what you want to achieve, while objectives outline specific, measurable steps to reach those goals. Ensure they align with your research question and contribute to your study’s significance.

You May Also Like

Learn about What a dissertation generator is and how reliable they are compared to a professional writing service.

Are you about to shift to a university housing accommodation? Consider these three things before shifting to have a comfortable time.

What is the Best Essay Writing Website? Here is all you need to know to choose the best website for essay writing for your essay assignment.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Starting the research process
• Research Objectives | Definition & Examples

Research Objectives | Definition & Examples

Published on July 12, 2022 by Eoghan Ryan . Revised on November 20, 2023.

Research objectives describe what your research is trying to achieve and explain why you are pursuing it. They summarize the approach and purpose of your project and help to focus your research.

Your objectives should appear in the introduction of your research paper , at the end of your problem statement . They should:

• Establish the scope and depth of your project
• Contribute to your research design
• Indicate how your project will contribute to existing knowledge

Table of contents

What is a research objective, why are research objectives important, how to write research aims and objectives, smart research objectives, other interesting articles, frequently asked questions about research objectives.

Research objectives describe what your research project intends to accomplish. They should guide every step of the research process , including how you collect data , build your argument , and develop your conclusions .

Your research objectives may evolve slightly as your research progresses, but they should always line up with the research carried out and the actual content of your paper.

Research aims

A distinction is often made between research objectives and research aims.

A research aim typically refers to a broad statement indicating the general purpose of your research project. It should appear at the end of your problem statement, before your research objectives.

Your research objectives are more specific than your research aim and indicate the particular focus and approach of your project. Though you will only have one research aim, you will likely have several research objectives.

Receive feedback on language, structure, and formatting

Professional editors proofread and edit your paper by focusing on:

• Academic style
• Vague sentences
• Style consistency

See an example

Research objectives are important because they:

• Establish the scope and depth of your project: This helps you avoid unnecessary research. It also means that your research methods and conclusions can easily be evaluated .
• Contribute to your research design: When you know what your objectives are, you have a clearer idea of what methods are most appropriate for your research.
• Indicate how your project will contribute to extant research: They allow you to display your knowledge of up-to-date research, employ or build on current research methods, and attempt to contribute to recent debates.

Once you’ve established a research problem you want to address, you need to decide how you will address it. This is where your research aim and objectives come in.

Step 1: Decide on a general aim

Your research aim should reflect your research problem and should be relatively broad.

Step 2: Decide on specific objectives

Break down your aim into a limited number of steps that will help you resolve your research problem. What specific aspects of the problem do you want to examine or understand?

Step 3: Formulate your aims and objectives

Once you’ve established your research aim and objectives, you need to explain them clearly and concisely to the reader.

You’ll lay out your aims and objectives at the end of your problem statement, which appears in your introduction. Frame them as clear declarative statements, and use appropriate verbs to accurately characterize the work that you will carry out.

The acronym “SMART” is commonly used in relation to research objectives. It states that your objectives should be:

• Specific: Make sure your objectives aren’t overly vague. Your research needs to be clearly defined in order to get useful results.
• Measurable: Know how you’ll measure whether your objectives have been achieved.
• Achievable: Your objectives may be challenging, but they should be feasible. Make sure that relevant groundwork has been done on your topic or that relevant primary or secondary sources exist. Also ensure that you have access to relevant research facilities (labs, library resources , research databases , etc.).
• Relevant: Make sure that they directly address the research problem you want to work on and that they contribute to the current state of research in your field.
• Time-based: Set clear deadlines for objectives to ensure that the project stays on track.

Prevent plagiarism. Run a free check.

If you want to know more about the research process , methodology , research bias , or statistics , make sure to check out some of our other articles with explanations and examples.

Methodology

• Sampling methods
• Simple random sampling
• Stratified sampling
• Cluster sampling
• Likert scales
• Reproducibility

 Statistics

• Null hypothesis
• Statistical power
• Probability distribution
• Effect size
• Poisson distribution

Research bias

• Optimism bias
• Cognitive bias
• Implicit bias
• Hawthorne effect
• Anchoring bias
• Explicit bias

Research objectives describe what you intend your research project to accomplish.

They summarize the approach and purpose of the project and help to focus your research.

Your objectives should appear in the introduction of your research paper , at the end of your problem statement .

Your research objectives indicate how you’ll try to address your research problem and should be specific:

Once you’ve decided on your research objectives , you need to explain them in your paper, at the end of your problem statement .

Keep your research objectives clear and concise, and use appropriate verbs to accurately convey the work that you will carry out for each one.

I will compare …

A research aim is a broad statement indicating the general purpose of your research project. It should appear in your introduction at the end of your problem statement , before your research objectives.

Research objectives are more specific than your research aim. They indicate the specific ways you’ll address the overarching aim.

Scope of research is determined at the beginning of your research process , prior to the data collection stage. Sometimes called “scope of study,” your scope delineates what will and will not be covered in your project. It helps you focus your work and your time, ensuring that you’ll be able to achieve your goals and outcomes.

Defining a scope can be very useful in any research project, from a research proposal to a thesis or dissertation . A scope is needed for all types of research: quantitative , qualitative , and mixed methods .

To define your scope of research, consider the following:

• Budget constraints or any specifics of grant funding
• Your proposed timeline and duration
• Specifics about your population of study, your proposed sample size , and the research methodology you’ll pursue
• Any inclusion and exclusion criteria
• Any anticipated control , extraneous , or confounding variables that could bias your research if not accounted for properly.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Ryan, E. (2023, November 20). Research Objectives | Definition & Examples. Scribbr. Retrieved April 5, 2024, from https://www.scribbr.com/research-process/research-objectives/

Is this article helpful?

Eoghan Ryan

Other students also liked, writing strong research questions | criteria & examples, how to write a problem statement | guide & examples, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

• Aims and Objectives – A Guide for Academic Writing
• Doing a PhD

One of the most important aspects of a thesis, dissertation or research paper is the correct formulation of the aims and objectives. This is because your aims and objectives will establish the scope, depth and direction that your research will ultimately take. An effective set of aims and objectives will give your research focus and your reader clarity, with your aims indicating what is to be achieved, and your objectives indicating how it will be achieved.

Introduction

There is no getting away from the importance of the aims and objectives in determining the success of your research project. Unfortunately, however, it is an aspect that many students struggle with, and ultimately end up doing poorly. Given their importance, if you suspect that there is even the smallest possibility that you belong to this group of students, we strongly recommend you read this page in full.

This page describes what research aims and objectives are, how they differ from each other, how to write them correctly, and the common mistakes students make and how to avoid them. An example of a good aim and objectives from a past thesis has also been deconstructed to help your understanding.

What Are Aims and Objectives?

Research aims.

A research aim describes the main goal or the overarching purpose of your research project.

In doing so, it acts as a focal point for your research and provides your readers with clarity as to what your study is all about. Because of this, research aims are almost always located within its own subsection under the introduction section of a research document, regardless of whether it’s a thesis , a dissertation, or a research paper .

A research aim is usually formulated as a broad statement of the main goal of the research and can range in length from a single sentence to a short paragraph. Although the exact format may vary according to preference, they should all describe why your research is needed (i.e. the context), what it sets out to accomplish (the actual aim) and, briefly, how it intends to accomplish it (overview of your objectives).

To give an example, we have extracted the following research aim from a real PhD thesis:

Example of a Research Aim

The role of diametrical cup deformation as a factor to unsatisfactory implant performance has not been widely reported. The aim of this thesis was to gain an understanding of the diametrical deformation behaviour of acetabular cups and shells following impaction into the reamed acetabulum. The influence of a range of factors on deformation was investigated to ascertain if cup and shell deformation may be high enough to potentially contribute to early failure and high wear rates in metal-on-metal implants.

Note: Extracted with permission from thesis titled “T he Impact And Deformation Of Press-Fit Metal Acetabular Components ” produced by Dr H Hothi of previously Queen Mary University of London.

Research Objectives

Where a research aim specifies what your study will answer, research objectives specify how your study will answer it.

They divide your research aim into several smaller parts, each of which represents a key section of your research project. As a result, almost all research objectives take the form of a numbered list, with each item usually receiving its own chapter in a dissertation or thesis.

Following the example of the research aim shared above, here are it’s real research objectives as an example:

Example of a Research Objective

• Develop finite element models using explicit dynamics to mimic mallet blows during cup/shell insertion, initially using simplified experimentally validated foam models to represent the acetabulum.
• Investigate the number, velocity and position of impacts needed to insert a cup.
• Determine the relationship between the size of interference between the cup and cavity and deformation for different cup types.
• Investigate the influence of non-uniform cup support and varying the orientation of the component in the cavity on deformation.
• Examine the influence of errors during reaming of the acetabulum which introduce ovality to the cavity.
• Determine the relationship between changes in the geometry of the component and deformation for different cup designs.
• Develop three dimensional pelvis models with non-uniform bone material properties from a range of patients with varying bone quality.
• Use the key parameters that influence deformation, as identified in the foam models to determine the range of deformations that may occur clinically using the anatomic models and if these deformations are clinically significant.

It’s worth noting that researchers sometimes use research questions instead of research objectives, or in other cases both. From a high-level perspective, research questions and research objectives make the same statements, but just in different formats.

Taking the first three research objectives as an example, they can be restructured into research questions as follows:

Restructuring Research Objectives as Research Questions

• Can finite element models using simplified experimentally validated foam models to represent the acetabulum together with explicit dynamics be used to mimic mallet blows during cup/shell insertion?
• What is the number, velocity and position of impacts needed to insert a cup?
• What is the relationship between the size of interference between the cup and cavity and deformation for different cup types?

Difference Between Aims and Objectives

Hopefully the above explanations make clear the differences between aims and objectives, but to clarify:

• The research aim focus on what the research project is intended to achieve; research objectives focus on how the aim will be achieved.
• Research aims are relatively broad; research objectives are specific.
• Research aims focus on a project’s long-term outcomes; research objectives focus on its immediate, short-term outcomes.
• A research aim can be written in a single sentence or short paragraph; research objectives should be written as a numbered list.

How to Write Aims and Objectives

Before we discuss how to write a clear set of research aims and objectives, we should make it clear that there is no single way they must be written. Each researcher will approach their aims and objectives slightly differently, and often your supervisor will influence the formulation of yours on the basis of their own preferences.

Regardless, there are some basic principles that you should observe for good practice; these principles are described below.

Your aim should be made up of three parts that answer the below questions:

• Why is this research required?
• What is this research about?
• How are you going to do it?

The easiest way to achieve this would be to address each question in its own sentence, although it does not matter whether you combine them or write multiple sentences for each, the key is to address each one.

The first question, why , provides context to your research project, the second question, what , describes the aim of your research, and the last question, how , acts as an introduction to your objectives which will immediately follow.

Scroll through the image set below to see the ‘why, what and how’ associated with our research aim example.

Note: Your research aims need not be limited to one. Some individuals per to define one broad ‘overarching aim’ of a project and then adopt two or three specific research aims for their thesis or dissertation. Remember, however, that in order for your assessors to consider your research project complete, you will need to prove you have fulfilled all of the aims you set out to achieve. Therefore, while having more than one research aim is not necessarily disadvantageous, consider whether a single overarching one will do.

Research Objectives

Each of your research objectives should be SMART :

• Specific – is there any ambiguity in the action you are going to undertake, or is it focused and well-defined?
• Measurable – how will you measure progress and determine when you have achieved the action?
• Achievable – do you have the support, resources and facilities required to carry out the action?
• Relevant – is the action essential to the achievement of your research aim?
• Timebound – can you realistically complete the action in the available time alongside your other research tasks?

In addition to being SMART, your research objectives should start with a verb that helps communicate your intent. Common research verbs include:

Table of Research Verbs to Use in Aims and Objectives

Last, format your objectives into a numbered list. This is because when you write your thesis or dissertation, you will at times need to make reference to a specific research objective; structuring your research objectives in a numbered list will provide a clear way of doing this.

To bring all this together, let’s compare the first research objective in the previous example with the above guidance:

Checking Research Objective Example Against Recommended Approach

Research Objective:

1. Develop finite element models using explicit dynamics to mimic mallet blows during cup/shell insertion, initially using simplified experimentally validated foam models to represent the acetabulum.

Checking Against Recommended Approach:

Q: Is it specific? A: Yes, it is clear what the student intends to do (produce a finite element model), why they intend to do it (mimic cup/shell blows) and their parameters have been well-defined ( using simplified experimentally validated foam models to represent the acetabulum ).

Q: Is it measurable? A: Yes, it is clear that the research objective will be achieved once the finite element model is complete.

Q: Is it achievable? A: Yes, provided the student has access to a computer lab, modelling software and laboratory data.

Q: Is it relevant? A: Yes, mimicking impacts to a cup/shell is fundamental to the overall aim of understanding how they deform when impacted upon.

Q: Is it timebound? A: Yes, it is possible to create a limited-scope finite element model in a relatively short time, especially if you already have experience in modelling.

Q: Does it start with a verb? A: Yes, it starts with ‘develop’, which makes the intent of the objective immediately clear.

Q: Is it a numbered list? A: Yes, it is the first research objective in a list of eight.

Mistakes in Writing Research Aims and Objectives

1. making your research aim too broad.

Having a research aim too broad becomes very difficult to achieve. Normally, this occurs when a student develops their research aim before they have a good understanding of what they want to research. Remember that at the end of your project and during your viva defence , you will have to prove that you have achieved your research aims; if they are too broad, this will be an almost impossible task. In the early stages of your research project, your priority should be to narrow your study to a specific area. A good way to do this is to take the time to study existing literature, question their current approaches, findings and limitations, and consider whether there are any recurring gaps that could be investigated .

Note: Achieving a set of aims does not necessarily mean proving or disproving a theory or hypothesis, even if your research aim was to, but having done enough work to provide a useful and original insight into the principles that underlie your research aim.

2. Making Your Research Objectives Too Ambitious

Be realistic about what you can achieve in the time you have available. It is natural to want to set ambitious research objectives that require sophisticated data collection and analysis, but only completing this with six months before the end of your PhD registration period is not a worthwhile trade-off.

3. Formulating Repetitive Research Objectives

Each research objective should have its own purpose and distinct measurable outcome. To this effect, a common mistake is to form research objectives which have large amounts of overlap. This makes it difficult to determine when an objective is truly complete, and also presents challenges in estimating the duration of objectives when creating your project timeline. It also makes it difficult to structure your thesis into unique chapters, making it more challenging for you to write and for your audience to read.

Fortunately, this oversight can be easily avoided by using SMART objectives.

Hopefully, you now have a good idea of how to create an effective set of aims and objectives for your research project, whether it be a thesis, dissertation or research paper. While it may be tempting to dive directly into your research, spending time on getting your aims and objectives right will give your research clear direction. This won’t only reduce the likelihood of problems arising later down the line, but will also lead to a more thorough and coherent research project.

Finding a PhD has never been this easy – search for a PhD by keyword, location or academic area of interest.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

Research Aims, Objectives & Questions

The “Golden Thread” Explained Simply (+ Examples)

By: David Phair (PhD) and Alexandra Shaeffer (PhD) | June 2022

The research aims , objectives and research questions (collectively called the “golden thread”) are arguably the most important thing you need to get right when you’re crafting a research proposal , dissertation or thesis . We receive questions almost every day about this “holy trinity” of research and there’s certainly a lot of confusion out there, so we’ve crafted this post to help you navigate your way through the fog.

Overview: The Golden Thread

• What is the golden thread
• What are research aims ( examples )
• What are research objectives ( examples )
• What are research questions ( examples )
• The importance of alignment in the golden thread

What is the “golden thread”?  

The golden thread simply refers to the collective research aims , research objectives , and research questions for any given project (i.e., a dissertation, thesis, or research paper ). These three elements are bundled together because it’s extremely important that they align with each other, and that the entire research project aligns with them.

Importantly, the golden thread needs to weave its way through the entirety of any research project , from start to end. In other words, it needs to be very clearly defined right at the beginning of the project (the topic ideation and proposal stage) and it needs to inform almost every decision throughout the rest of the project. For example, your research design and methodology will be heavily influenced by the golden thread (we’ll explain this in more detail later), as well as your literature review.

The research aims, objectives and research questions (the golden thread) define the focus and scope ( the delimitations ) of your research project. In other words, they help ringfence your dissertation or thesis to a relatively narrow domain, so that you can “go deep” and really dig into a specific problem or opportunity. They also help keep you on track , as they act as a litmus test for relevance. In other words, if you’re ever unsure whether to include something in your document, simply ask yourself the question, “does this contribute toward my research aims, objectives or questions?”. If it doesn’t, chances are you can drop it.

Alright, enough of the fluffy, conceptual stuff. Let’s get down to business and look at what exactly the research aims, objectives and questions are and outline a few examples to bring these concepts to life.

Research Aims: What are they?

Simply put, the research aim(s) is a statement that reflects the broad overarching goal (s) of the research project. Research aims are fairly high-level (low resolution) as they outline the general direction of the research and what it’s trying to achieve .

Research Aims: Examples  

True to the name, research aims usually start with the wording “this research aims to…”, “this research seeks to…”, and so on. For example:

“This research aims to explore employee experiences of digital transformation in retail HR.”   “This study sets out to assess the interaction between student support and self-care on well-being in engineering graduate students”  

As you can see, these research aims provide a high-level description of what the study is about and what it seeks to achieve. They’re not hyper-specific or action-oriented, but they’re clear about what the study’s focus is and what is being investigated.

Need a helping hand?

Research Objectives: What are they?

The research objectives take the research aims and make them more practical and actionable . In other words, the research objectives showcase the steps that the researcher will take to achieve the research aims.

The research objectives need to be far more specific (higher resolution) and actionable than the research aims. In fact, it’s always a good idea to craft your research objectives using the “SMART” criteria. In other words, they should be specific, measurable, achievable, relevant and time-bound”.

Research Objectives: Examples  

Let’s look at two examples of research objectives. We’ll stick with the topic and research aims we mentioned previously.  

For the digital transformation topic:

To observe the retail HR employees throughout the digital transformation. To assess employee perceptions of digital transformation in retail HR. To identify the barriers and facilitators of digital transformation in retail HR.

And for the student wellness topic:

To determine whether student self-care predicts the well-being score of engineering graduate students. To determine whether student support predicts the well-being score of engineering students. To assess the interaction between student self-care and student support when predicting well-being in engineering graduate students.

  As you can see, these research objectives clearly align with the previously mentioned research aims and effectively translate the low-resolution aims into (comparatively) higher-resolution objectives and action points . They give the research project a clear focus and present something that resembles a research-based “to-do” list.

Research Questions: What are they?

Finally, we arrive at the all-important research questions. The research questions are, as the name suggests, the key questions that your study will seek to answer . Simply put, they are the core purpose of your dissertation, thesis, or research project. You’ll present them at the beginning of your document (either in the introduction chapter or literature review chapter) and you’ll answer them at the end of your document (typically in the discussion and conclusion chapters).  

The research questions will be the driving force throughout the research process. For example, in the literature review chapter, you’ll assess the relevance of any given resource based on whether it helps you move towards answering your research questions. Similarly, your methodology and research design will be heavily influenced by the nature of your research questions. For instance, research questions that are exploratory in nature will usually make use of a qualitative approach, whereas questions that relate to measurement or relationship testing will make use of a quantitative approach.  

Let’s look at some examples of research questions to make this more tangible.

Research Questions: Examples  

Again, we’ll stick with the research aims and research objectives we mentioned previously.  

For the digital transformation topic (which would be qualitative in nature):

How do employees perceive digital transformation in retail HR? What are the barriers and facilitators of digital transformation in retail HR?  

And for the student wellness topic (which would be quantitative in nature):

Does student self-care predict the well-being scores of engineering graduate students? Does student support predict the well-being scores of engineering students? Do student self-care and student support interact when predicting well-being in engineering graduate students?  

You’ll probably notice that there’s quite a formulaic approach to this. In other words, the research questions are basically the research objectives “converted” into question format. While that is true most of the time, it’s not always the case. For example, the first research objective for the digital transformation topic was more or less a step on the path toward the other objectives, and as such, it didn’t warrant its own research question.  

So, don’t rush your research questions and sloppily reword your objectives as questions. Carefully think about what exactly you’re trying to achieve (i.e. your research aim) and the objectives you’ve set out, then craft a set of well-aligned research questions . Also, keep in mind that this can be a somewhat iterative process , where you go back and tweak research objectives and aims to ensure tight alignment throughout the golden thread.

The importance of strong alignment 

Alignment is the keyword here and we have to stress its importance . Simply put, you need to make sure that there is a very tight alignment between all three pieces of the golden thread. If your research aims and research questions don’t align, for example, your project will be pulling in different directions and will lack focus . This is a common problem students face and can cause many headaches (and tears), so be warned.

Take the time to carefully craft your research aims, objectives and research questions before you run off down the research path. Ideally, get your research supervisor/advisor to review and comment on your golden thread before you invest significant time into your project, and certainly before you start collecting data .  

Recap: The golden thread

In this post, we unpacked the golden thread of research, consisting of the research aims , research objectives and research questions . You can jump back to any section using the links below.

As always, feel free to leave a comment below – we always love to hear from you. Also, if you’re interested in 1-on-1 support, take a look at our private coaching service here.

Psst… there’s more (for free)

This post is part of our dissertation mini-course, which covers everything you need to get started with your dissertation, thesis or research project. 

You Might Also Like:

38 Comments

Thank you very much for your great effort put. As an Undergraduate taking Demographic Research & Methodology, I’ve been trying so hard to understand clearly what is a Research Question, Research Aim and the Objectives in a research and the relationship between them etc. But as for now I’m thankful that you’ve solved my problem.

Well appreciated. This has helped me greatly in doing my dissertation.

An so delighted with this wonderful information thank you a lot.

so impressive i have benefited a lot looking forward to learn more on research.

I am very happy to have carefully gone through this well researched article.

Infact,I used to be phobia about anything research, because of my poor understanding of the concepts.

Now,I get to know that my research question is the same as my research objective(s) rephrased in question format.

I please I would need a follow up on the subject,as I intends to join the team of researchers. Thanks once again.

Thanks so much. This was really helpful.

I know you pepole have tried to break things into more understandable and easy format. And God bless you. Keep it up

i found this document so useful towards my study in research methods. thanks so much.

This is my 2nd read topic in your course and I should commend the simplified explanations of each part. I’m beginning to understand and absorb the use of each part of a dissertation/thesis. I’ll keep on reading your free course and might be able to avail the training course! Kudos!

Thank you! Better put that my lecture and helped to easily understand the basics which I feel often get brushed over when beginning dissertation work.

This is quite helpful. I like how the Golden thread has been explained and the needed alignment.

This is quite helpful. I really appreciate!

The article made it simple for researcher students to differentiate between three concepts.

Very innovative and educational in approach to conducting research.

I am very impressed with all these terminology, as I am a fresh student for post graduate, I am highly guided and I promised to continue making consultation when the need arise. Thanks a lot.

A very helpful piece. thanks, I really appreciate it .

Very well explained, and it might be helpful to many people like me.

Wish i had found this (and other) resource(s) at the beginning of my PhD journey… not in my writing up year… 😩 Anyways… just a quick question as i’m having some issues ordering my “golden thread”…. does it matter in what order you mention them? i.e., is it always first aims, then objectives, and finally the questions? or can you first mention the research questions and then the aims and objectives?

Thank you for a very simple explanation that builds upon the concepts in a very logical manner. Just prior to this, I read the research hypothesis article, which was equally very good. This met my primary objective.

My secondary objective was to understand the difference between research questions and research hypothesis, and in which context to use which one. However, I am still not clear on this. Can you kindly please guide?

In research, a research question is a clear and specific inquiry that the researcher wants to answer, while a research hypothesis is a tentative statement or prediction about the relationship between variables or the expected outcome of the study. Research questions are broader and guide the overall study, while hypotheses are specific and testable statements used in quantitative research. Research questions identify the problem, while hypotheses provide a focus for testing in the study.

Exactly what I need in this research journey, I look forward to more of your coaching videos.

This helped a lot. Thanks so much for the effort put into explaining it.

What data source in writing dissertation/Thesis requires?

What is data source covers when writing dessertation/thesis

This is quite useful thanks

I’m excited and thankful. I got so much value which will help me progress in my thesis.

where are the locations of the reserch statement, research objective and research question in a reserach paper? Can you write an ouline that defines their places in the researh paper?

Very helpful and important tips on Aims, Objectives and Questions.

Thank you so much for making research aim, research objectives and research question so clear. This will be helpful to me as i continue with my thesis.

Thanks much for this content. I learned a lot. And I am inspired to learn more. I am still struggling with my preparation for dissertation outline/proposal. But I consistently follow contents and tutorials and the new FB of GRAD Coach. Hope to really become confident in writing my dissertation and successfully defend it.

As a researcher and lecturer, I find splitting research goals into research aims, objectives, and questions is unnecessarily bureaucratic and confusing for students. For most biomedical research projects, including ‘real research’, 1-3 research questions will suffice (numbers may differ by discipline).

Awesome! Very important resources and presented in an informative way to easily understand the golden thread. Indeed, thank you so much.

Well explained

The blog article on research aims, objectives, and questions by Grad Coach is a clear and insightful guide that aligns with my experiences in academic research. The article effectively breaks down the often complex concepts of research aims and objectives, providing a straightforward and accessible explanation. Drawing from my own research endeavors, I appreciate the practical tips offered, such as the need for specificity and clarity when formulating research questions. The article serves as a valuable resource for students and researchers, offering a concise roadmap for crafting well-defined research goals and objectives. Whether you’re a novice or an experienced researcher, this article provides practical insights that contribute to the foundational aspects of a successful research endeavor.

A great thanks for you. it is really amazing explanation. I grasp a lot and one step up to research knowledge.

I really found these tips helpful. Thank you very much Grad Coach.

I found this article helpful. Thanks for sharing this.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

• Link to facebook
• Link to linkedin
• Link to twitter
• Link to youtube
• Writing Tips

How to Write Research Objectives

3-minute read

• 22nd November 2021

Writing a research paper, thesis, or dissertation ? If so, you’ll want to state your research objectives in the introduction of your paper to make it clear to your readers what you’re trying to accomplish. But how do you write effective research objectives? In this post, we’ll look at two key topics to help you do this:

• How to use your research aims as a basis for developing objectives.
• How to use SMART criteria to refine your research objectives.

For more advice on how to write strong research objectives, see below.

Research Aims and Objectives

There is an important difference between research aims and research objectives:

• A research aim defines the main purpose of your research. As such, you can think of your research aim as answering the question “What are you doing?”
• Research objectives (as most studies will have more than one) are the steps you will take to fulfil your aims. As such, your objectives should answer the question “How are you conducting your research?”

For instance, an example research aim could be:

This study will investigate the link between dehydration and the incidence of urinary tract infections (UTIs) in intensive care patients in Australia.

To develop a set of research objectives, you would then break down the various steps involved in meeting said aim. For example:

This study will investigate the link between dehydration and the incidence of urinary tract infections (UTIs) in intensive care patients in Australia. To achieve this, the study objectives w ill include:

• Replicat ing a small Singaporean study into the role of dehydration in UTIs in hospital patients (Sepe, 2018) in a larger Australian cohort.
• Trialing the use of intravenous fluids for intensive care patients to prevent dehydration.
• Assessing the relationship between the age of patients and quantities of intravenous fluids needed to counter dehydration.

Find this useful?

Subscribe to our newsletter and get writing tips from our editors straight to your inbox.

Note that the objectives don’t go into any great detail here. The key is to briefly summarize each component of your study. You can save details for how you will conduct the research for the methodology section of your paper.

Make Your Research Objectives SMART

A great way to refine your research objectives is to use SMART criteria . Borrowed from the world of project management, there are many versions of this system. However, we’re going to focus on developing specific, measurable, achievable, relevant, and timebound objectives.

In other words, a good research objective should be all of the following:

• S pecific – Is the objective clear and well-defined?
• M easurable – How will you know when the objective has been achieved? Is there a way to measure the thing you’re seeking to do?
• A chievable – Do you have the support and resources necessary to undertake this action? Are you being overly ambitious with this objective?
• R elevant – Is this objective vital for fulfilling your research aim?
• T imebound – Can this action be realistically undertaken in the time you have?

If you follow this system, your research objectives will be much stronger.

Expert Research Proofreading

Whatever your research aims and objectives, make sure to have your academic writing proofread by the experts!

Our academic editors can help you with research papers and proposals , as well as any other scholarly document you need checking. And this will help to ensure that your academic writing is always clear, concise, and precise.

Submit a free sample document today to trial our services and find out more.

Share this article:

Post A New Comment

Got content that needs a quick turnaround? Let us polish your work. Explore our editorial business services.

What is a content editor.

Are you interested in learning more about the role of a content editor and the...

4-minute read

The Benefits of Using an Online Proofreading Service

Proofreading is important to ensure your writing is clear and concise for your readers. Whether...

2-minute read

6 Online AI Presentation Maker Tools

Creating presentations can be time-consuming and frustrating. Trying to construct a visually appealing and informative...

What Is Market Research?

No matter your industry, conducting market research helps you keep up to date with shifting...

8 Press Release Distribution Services for Your Business

In a world where you need to stand out, press releases are key to being...

How to Get a Patent

In the United States, the US Patent and Trademarks Office issues patents. In the United...

Make sure your writing is the best it can be with our expert English proofreading and editing.

404 Not found

Steffi Loreti Blog

Complete your thesis with SMART goals

by Steffi Loreti · Published January 12, 2015 · Updated January 15, 2015

I have often seen candidates missing their deadlines, simply because the goals they had set were not appropriate. They had failed to plan, and in effect, planned to fail. If you overload your schedule and expect too much too soon, then there is a high probability that you will not be able to execute your plans. Hence, I always advice scholars to set objectives that are SMART.

Assess the research goal before you start to explore it. Is it too vague or has a wide scope? For example, if your objective says “studying health problems in developing countries”, then I have genuine doubt that you will attain any concrete result. Clearly defined, very specific goals will make your research worthwhile.

Apart from being focused, the research goals must also be measurable. In any case, a research project will involve data analysis to seek a certain result. You must be able to measure how your study influences the issue being discussed.

There are many limiting factors which must be considered while setting a goal. How much time have you got to complete the research? What are the resources at your disposal? Will you be able to gather the required data? The objectives of research must be set keeping in mind all these aspects. Once you are sure that you have the time and resources needed, you can expect to achieve the goal.

It is fine to be innovative while choosing a dissertation topic, but don’t be too creative. It should not be something out of your dreams. Do a study of the feasibility of the research objectives.

This also applies to the goal that you set for the task of writing the dissertation. If you plan to finish your report in a few days by writing scores of pages every day, God save you! Start early, plan to finish about five pages every day and stick to the plan to meet the deadline.

Here again, the time allowed by your committee for completing the project must be considered. Do not hope to get an extension for submission of the report. A fool-proof plan is one that allows for some delay. So, you should not get jitters in case you are not able to arrange the equipment, or conduct the interviews as planned.

Subscribe now!

Subscribe today and get future blog posts your email.

Tags: PhD Thesis

Steffi Loreti

Dr. Steffi Loreti has earned her PhD in Social Psychology. She has taught history and sociology for over fifteen years and has published forty seven research papers in impact factor journals. She has seven years of hands-on experience in reviewing and editing dissertations, proposals and technical manuscripts. She has chaired over 100 dissertations in the past. She has been supporting scholars through her company named 24x7 Editing, which offers detailed proofreading, editing and formatting services.

You may also like...

Faster Thesis Writing in 10 Steps

October 30, 2014

 by Steffi Loreti · Published October 30, 2014 · Last modified January 15, 2015

Avoid last minute mistakes in your dissertation paper by opting for dissertation editing service

September 1, 2017

 by Steffi Loreti · Published September 1, 2017 · Last modified March 31, 2018

Deciding to hire an editor: Must read this

November 25, 2014

 by Steffi Loreti · Published November 25, 2014 · Last modified January 15, 2015

• Next story  How to Select the Right Research Method for Your Study
• Previous story  List for last minute check of your journal paper

Submit Post

• Development Editing
• Manuscript editing
• Proofreading
• Research Design
• Thesis Writing

Recent Posts

• 6 Tips on Writing the Perfect Executive Summary for Your Thesis
• 5 Key Tips to Write a Thesis
• Learn Surefire Ways to get your Dissertation Completed
• Do you Know the Setbacks of Fixing on Qualitative Research Method?
• How To Write a Paper That Will Definitely Get Published

Recent Comments

Being smart about writing SMART objectives

Affiliations.

• 1 University of North Dakota, School of Medicine & Health Sciences, Center for Rural Health Evaluation, 250 Centennial Dr. Stop 8138, Grand Forks, ND 58202-8138, United States. Electronic address: [email protected].
• 2 University of North Dakota, School of Medicine & Health Sciences, Center for Rural Health Evaluation, 250 Centennial Dr. Stop 8138, Grand Forks, ND 58202-8138, United States. Electronic address: [email protected].
• PMID: 28056403
• DOI: 10.1016/j.evalprogplan.2016.12.009

This article challenges the conventional wisdom in mainstream evaluation regarding the process for developing specific, measurable, attainable, relevant, and time-bound (SMART) objectives. The article notes several advantages of mainstreaming the SMART method including program capacity building and being able to independently monitor progress toward process and outcome objectives. It is argued the one size fits all approach for writing SMART objectives is misleading. The context in which the evaluation is conducted is a key deciding factor in how and when the SMART criteria should be applied. Without an appreciation of the evaluation context, mainstream users may be developing objectives that are far from smart. A case example is presented demonstrating a situation where a stepwise, rather than simultaneous application of the SMART criteria was necessary. Learning from this case, recommendations are forwarded for adjusting how SMART criteria should be presented in mainstream evaluation manuals/guides.

Keywords: Evaluation guidance; Mainstreaming; Objective development; SMART objectives.

Copyright © 2016 Elsevier Ltd. All rights reserved.

Publication types

• Research Support, Non-U.S. Gov't
• Health Knowledge, Attitudes, Practice
• Health Promotion / organization & administration
• Organizational Case Studies
• Out-of-Hospital Cardiac Arrest / diagnosis
• Out-of-Hospital Cardiac Arrest / therapy
• Program Development / methods*
• Program Development / standards*
• Program Evaluation / methods*
• Program Evaluation / standards*

• 44-207-097-1871

Dissertation Writing Tools

• 1. Complete Dissertation Writing Guide - eBook
• 2. Dissertation Templates Pack
• 3. Research Methodology Handbook
• 4. Academic Writing Checklist
• 5. Citation Style Guide
• 6. Time Management for Dissertation Writing
• 7. Literature Review Toolkit
• 8. Grammar and Style Guide
• 9. Dissertation Proposal Template
• 10.Five Pre-written Full Dissertation Papers

Dissertation Objectives

How to Develop Effective Dissertation Aims and Objectives that’ll Impress Your Supervisors Are you trying to compose your dissertation aims and objectives and don’t know where to start? You have selected the theme of your research but don’t know what to do next? Don’t worry because we will guide you. Not only will we tell […]

Table of Contents

How to Develop Effective Dissertation Aims and Objectives that’ll Impress Your Supervisors

Are you trying to compose your dissertation aims and objectives and don’t know where to start, you have selected the theme of your research but don’t know what to do next.

Don’t worry because we will guide you.

Not only will we tell you how to compose the aims and objectives of the dissertation, but we will also give you easy-to-understand Dissertation aims and objectives examples that will help you in composing your own research aims and objectives.

The purpose of the aim and objectives of the research report is to support a logical supposition with valid arguments on which your investigation and data analysis will be based.

After the selection of your research theme, the most important step is to develop the aims and objectives of your research study. This will give a clear direction for your entire investigative process; the hypothesis, data collection method, statistical tool, analysis, and conclusion of your report.

What is the difference between the aims and objectives in a dissertation?

Both the statements in a research report try to determine the purpose of the study with assumed outcomes. The only difference between the two is that the aims are generally broad statements that are based on the research theme while the dissertation objectives examples are more specific statements that give way to further tasks in the investigative process. There is one general aim of the research while there can be several objectives.

How to formulate the aims and objectives?

Keep in mind that your research aims and objectives should answer the following questions. While composing this part of your research report, just make sure that you answer the following questions which will make the composition process easier.

While composing the dissertation objectives, just keep these factors in mind

• Your objectives should be interlinked with the theme of the research and should be leading up to it
• The scope of your objectives should not be so broad that your research becomes too generic or insignificant.
• Make sure that the objectives that you have listed are realistic and doable.

Dissertation aims and objectives examples

Substance abuse patterns in college students.

To determine the factors that result in substance abuse patterns in college students

• To determine the effect of peer pressure on substance abuse patterns among college students.
• To determine the effect of educational pressure on substance abuse patterns among college students.

There you have all the information you need to know to develop effective aims and objectives for your dissertation that will impress your supervisors.

Paid Topic Mini Proposal (500 Words)

You will get the topics first and then the mini proposal which includes:

• An explanation why we choose this topic.
• 2-3 research questions.
• Key literature resources identification.
• Suitable methodology including raw sample size and data collection method
• View a Sample of Service

Note: After submiting your order please must check your email [inbox/spam] folders for order confirmation and login details.If email goes in spam please mark not as spam to avoid any communication gap between us.

Get An Expert Dissertation Writing Help To Achieve Good Grades

By placing an order with us, you can get;

• Writer consultation before payment to ensure your work is in safe hands.
• Free topic if you don't have one
• Draft submissions to check the quality of the work as per supervisor's feedback
• Free revisions
• Complete privacy
• Plagiarism Free work
• Guaranteed 2:1 (With help of your supervisor's feedback)
• 2 Instalments plan
• Special discounts

Other Related Posts

• 57 Best Ecommerce Research Topics Ideas and Examples November 30, 2021 -->
• 53 Best Dissertation topics on domestic violence & Examples November 30, 2021 -->
• 87 Dementia dissertation topics in nursing November 18, 2021 -->
• 56 Best Critical Care Nursing Research Topics ideas with examples November 18, 2021 -->
• 6000 word dissertation structure March 8, 2021 -->
• 5000 word dissertation structure March 8, 2021 -->
• 20000 word dissertation structure March 8, 2021 -->
• 12000 word dissertation structure March 8, 2021 -->
• 7000 Word Dissertation Structure March 4, 2021 -->
• Masters dissertation word count and its breakdown March 4, 2021 -->
• How Long Does It Take to Write a 15000 Word Dissertation? Tips and Strategies to Finish on Time March 1, 2021 -->
• How to get dissertation help for cork university January 21, 2021 -->
• Research Proposal Topics in Finance April 18, 2020 -->
• Best French Dissertation Topics and Ideas 2023 April 1, 2020 -->
• Environmental Management Dissertation Topics, Ideas in 2023 March 21, 2020 -->

WhatsApp and Get 35% off promo code now!

Research Voyage

Research Tips and Infromation

How to Write Aims and Objectives for your Dissertation or Thesis?

Introduction

Understanding aims and objectives, crafting aims, break it down into objectives, developing specific objectives, align with research questions, consider feasibility, review and refine, seek feedback, documenting aims and objectives.

In a PhD or Post Graduate dissertation, the aims and objectives play a crucial role in shaping the research process and ensuring focus. They provide a clear roadmap for your study and serve as the guiding principles that steer your research in the right direction.

Aims represent the broader purpose or the overarching goal of your research. They define what you want to achieve with your dissertation. For example, let’s say you’re conducting a study on renewable energy sources. Your aim could be to analyze the economic viability and environmental impact of solar energy adoption in residential areas.

Objectives, on the other hand, break down the aim into specific, measurable, and achievable targets that help you accomplish your research goal. They outline the specific steps or tasks you need to undertake to fulfill the aim. Continuing with the previous example, some objectives could be:

• Evaluate the current state of solar energy technologies and their efficiency.
• Assess the economic costs and benefits associated with the installation of solar panels in residential areas.
• Analyze the environmental impact of solar energy adoption in terms of carbon emissions reduction.
• Investigate the potential barriers to the widespread adoption of solar energy in residential communities.
• Develop recommendations for policymakers and stakeholders to promote the use of solar energy in residential areas.

These objectives, when combined, address different aspects related to the aim of analyzing the economic viability and environmental impact of solar energy adoption. Each objective guides a specific aspect of the research and contributes to answering the research questions.

By having clear aims and objectives, you establish a solid framework for your study. They help you stay focused on the main purpose of your research and prevent you from getting sidetracked or overwhelmed by tangential topics. Moreover, they provide clarity to both you and your readers, ensuring that your research remains coherent and well-structured.

In summary, clear aims and objectives are instrumental in guiding the research process of a PhD dissertation. They provide a roadmap, define the research goal, and break it down into specific targets. Through the example provided, it is evident how aims and objectives bring focus to a study on renewable energy sources and solar energy adoption in residential areas.

If you are in paucity of time, not confident of your writing skills and in a hurry to complete the writing task then you can think of hiring a research consultant that solves all your problems. Please visit my article on Hiring a Research consultant for your PhD tasks for further details.

Aims and objectives play a crucial role in guiding research projects. It’s important to define these terms and differentiate between them to ensure a clear focus in your work.

Aims represent the broader purpose or goal of your study. They define what you aim to achieve through your research project. Aims provide the overarching context and direction for your work, guiding the selection of topics, methodologies, and outcomes.

Example: Suppose you’re working on a PhD dissertation in computer science with a focus on natural language processing. Your aim could be: “To develop an efficient and accurate algorithm for sentiment analysis in social media data.”

In this example, the aim highlights the objective of creating an algorithm specifically for sentiment analysis in social media data, indicating the main objective of your research.

Objectives break down the aim into specific, measurable, and achievable targets that contribute to achieving the overall goal. They are more focused and concrete than aims, outlining the steps or tasks necessary to fulfill the aim. Objectives serve as the building blocks of your research, guiding the implementation and evaluation of your work.

Example: Continuing with the previous aim, let’s define some specific objectives:

• Collect and preprocess a large dataset of social media posts for sentiment analysis.
• Explore and compare existing sentiment analysis techniques to identify their limitations and strengths.
• Design and develop a novel algorithm that addresses the limitations of current approaches.
• Implement the algorithm and evaluate its performance on the collected dataset.
• Analyze the results and compare them with existing state-of-the-art sentiment analysis methods.

These objectives, when combined, address different aspects necessary to fulfill the aim of developing an efficient and accurate sentiment analysis algorithm for social media data. Each objective represents a specific task or milestone that contributes to the overall research goal.

The relationship between aims and objectives is critical in driving research. Objectives are derived from the aim and provide the means to accomplish it. They act as stepping stones, guiding the researcher towards achieving the broader aim.

In summary, aims provide the broader context and goal, while objectives break down the aim into specific tasks and milestones. Together, they ensure focus and direction in your research, guiding the selection of topics, methodologies, and outcomes. The objectives serve as the means to achieve the overall aim, highlighting the relationship between aims and objectives in driving research in the computer science domain.

Formulating the overarching aim of your research is a crucial step in defining the direction and purpose of your dissertation. The aim represents the primary goal or intention of your study, and crafting it effectively is essential for setting the foundation of your research.

Research Topic: Enhancing cybersecurity in cloud computing environments.

In this example, the aim focuses on improving cybersecurity in the context of cloud computing. The aim should be formulated in a concise and focused manner that aligns with the research topic. Here’s an example of how the aim could be crafted effectively:

Aim: Develop an efficient and robust security framework for ensuring data confidentiality, integrity, and availability in cloud computing environments.

The above aim encapsulates the overall goal of the research, which is to develop a security framework for enhancing cybersecurity in cloud computing. It clearly states the intention to address key aspects such as data confidentiality, integrity, and availability. The aim is concise, specific, and directly aligned with the research topic.

The significance of a well-defined aim cannot be overstated. It serves as a guiding beacon throughout your research journey, providing a clear direction and purpose. A well-crafted aim helps you stay focused and ensures that your efforts are aligned with the research’s core objectives. It also helps you communicate the purpose of your study to others, including your advisor, peers, and potential readers of your dissertation.

Additionally, an effective aim sets the stage for the subsequent development of specific objectives and research questions. It serves as a foundation upon which you can break down the aim into smaller, manageable objectives that contribute to achieving the overall research goal. Each objective should align with the aim and work together harmoniously to address the research questions and gaps in the field.

Moreover, a concise and aligned aim allows readers to quickly grasp the essence of your research. It provides them with a clear understanding of the research’s scope and purpose. By stating the aim concisely and aligning it with the research topic, you demonstrate your ability to articulate the core objective of your study in a succinct manner.

In summary, crafting effective aims involves formulating the overarching goal or intention of your research in a concise and focused manner. A well-defined aim sets the direction for your dissertation, guiding your efforts and ensuring alignment with the research topic. It serves as a foundation for the development of specific objectives and research questions. By presenting a clear and aligned aim, you convey the purpose of your study to others and demonstrate your ability to articulate the core objective of your research.

After defining the aim of your research, it’s important to break it down into smaller, manageable objectives. These objectives should address key research questions or subtopics that are necessary to achieve the overall aim. Additionally, objectives should be specific, measurable, and utilize action verbs to describe the intended actions or achievements.

Example: Suppose the aim of your research is to develop a recommendation system for an e-commerce platform. Here are some examples of specific objectives:

• Action Verbs: Analyze, Identify
• Description: Gather and analyze user preferences and historical data from the e-commerce platform to identify patterns in user behavior and item preferences.
• Action Verbs: Design, Implement
• Description: Develop and implement collaborative filtering algorithms, such as user-based or item-based methods, to generate personalized recommendations based on user similarities or item similarities.
• Action Verbs: Incorporate
• Description: Integrate machine learning techniques, such as matrix factorization or deep learning models, into the recommendation system to improve the accuracy and personalization of the recommendations.
• Action Verbs: Evaluate
• Description: Conduct experiments and evaluate the performance of the recommendation system using appropriate evaluation metrics, such as precision, recall, or mean average precision, to assess the effectiveness and efficiency of the system.
• Action Verbs: Optimize
• Description: Identify and implement optimization techniques, such as parallel computing or distributed systems, to enhance the scalability and efficiency of the recommendation algorithm, allowing it to handle large-scale datasets and real-time recommendations.

By breaking down the aim into these specific objectives, you address key components of developing a recommendation system, such as data analysis, algorithm design, evaluation, and optimization. Each objective represents a distinct step that contributes to achieving the overall aim.

Importantly, these objectives are specific and measurable, allowing you to determine whether you have successfully achieved them. For instance, you can measure the accuracy of the recommendation system, evaluate its performance against baseline models, or assess its scalability in terms of handling large datasets.

In summary, when conducting research, breaking down the aim into specific objectives helps in managing the workload and providing a clear roadmap for your research. These objectives should address key research questions or subtopics, be specific and measurable, and use action verbs to describe the intended actions or achievements. By following this approach, you can ensure a systematic and focused research process.

To develop specific objectives for your research, you need to break down the overarching aim into smaller, measurable objectives. These objectives should be clear, specific, and actionable, providing a roadmap for your research and guiding the entire research process.

Aim: Develop a machine learning-based system for automated sentiment analysis in social media data.

Objective 1: Conduct a comprehensive literature review on existing sentiment analysis techniques and methodologies.

• Breakdown: This objective focuses on reviewing the literature in the field of sentiment analysis, specifically examining the various techniques and methodologies that have been developed and applied. It involves gathering and analyzing research papers, books, and other relevant sources to gain a comprehensive understanding of the existing knowledge in sentiment analysis.

Objective 2: Collect a large dataset of social media posts for training and evaluation.

• Breakdown: This objective entails the collection of a substantial amount of social media data that will be used as input for training and evaluating the machine learning model. It involves designing data collection mechanisms, such as web scraping or utilizing available APIs, to gather a diverse set of social media posts from platforms like Twitter or Facebook.

Objective 3: Design and implement a machine learning algorithm capable of accurately detecting sentiment polarity in social media text.

• Breakdown: This objective focuses on the development of a machine learning algorithm tailored for sentiment analysis in social media text. It involves designing and implementing the necessary algorithms, selecting appropriate feature representations, and training a model to accurately classify sentiment polarity (positive, negative, or neutral) of social media posts.

Objective 4: Evaluate the performance of the developed sentiment analysis system against benchmark datasets and compare it with existing state-of-the-art approaches.

• Breakdown: This objective involves assessing the performance of the developed sentiment analysis system by evaluating it against established benchmark datasets. It requires selecting appropriate evaluation metrics and comparing the system’s performance with existing state-of-the-art approaches in sentiment analysis, such as accuracy, precision, recall, or F1 score.

The importance of clear, specific objectives cannot be overstated. These objectives provide a clear roadmap and direction for your research, guiding your efforts and ensuring that you stay on track. They help you structure your research activities, allocate resources effectively, and measure progress along the way.

Using action verbs to articulate objectives effectively is another crucial aspect. Action verbs convey specific actions or achievements that need to be accomplished. They provide clarity and precision, leaving no room for ambiguity. For example:

By using action verbs, you explicitly state what needs to be done or achieved in each objective, making it easier to track progress and assess the completion of objectives.

In summary, developing specific objectives involves breaking down the overarching aim into smaller, measurable objectives. Clear and specific objectives provide a roadmap for your research and guide the entire research process. By using action verbs, you articulate objectives effectively, leaving no room for ambiguity. These objectives help structure your research activities, allocate resources effectively, and measure progress, ultimately leading to the successful completion of your research.

When formulating objectives for your research, it is essential to ensure that they align with the research questions you have formulated. Each objective should contribute to addressing or answering a specific research question, creating a cohesive and focused research framework.

Example: Suppose your research in computer science focuses on developing an automated system for detecting and preventing cybersecurity threats. Here are examples of objectives aligned with research questions:

Research Question: How can machine learning algorithms be utilized to detect and mitigate cybersecurity threats effectively?

Objective 1: Evaluate and compare different machine learning algorithms for cybersecurity threat detection.

• Description: Explore and assess various machine learning algorithms, such as decision trees, random forests, or neural networks, to identify the most suitable approach for detecting cybersecurity threats accurately and efficiently.

Objective 2: Develop a dataset representative of diverse cybersecurity threats.

• Description: Create a comprehensive dataset containing various types of cybersecurity threats, including malware, phishing attacks, and network intrusions, to train and evaluate the machine learning models effectively.

Research Question: What are the key challenges and vulnerabilities in existing cybersecurity systems that need to be addressed?

Objective 3: Conduct a systematic analysis of existing cybersecurity systems and identify vulnerabilities.

• Description: Analyze and evaluate existing cybersecurity systems, such as intrusion detection systems or antivirus software, to identify vulnerabilities, weaknesses, and potential areas of improvement that can inform the development of a more robust automated system.

Objective 4: Propose novel techniques to enhance the resilience of the cybersecurity system.

• Description: Develop innovative approaches, such as anomaly detection algorithms or behavior-based analysis techniques, to enhance the resilience of the automated cybersecurity system and address the identified vulnerabilities.

By aligning the objectives with the research questions, you ensure that each objective contributes to addressing a specific aspect of your research. For example, Objective 1 directly addresses the research question regarding the utilization of machine learning algorithms for cybersecurity threat detection. Objective 3 focuses on analyzing existing systems to identify vulnerabilities, which is in line with the question about challenges and vulnerabilities in existing cybersecurity systems.

The alignment between research questions and objectives helps maintain a clear focus on the research objectives and ensures that your efforts are directed towards addressing the research questions. It also enhances the coherence of your research, as each objective becomes a stepping stone towards answering the research questions and achieving the overall aim of your study.

In summary, aligning objectives with research questions is crucial in research. It ensures that each objective contributes to answering or addressing a specific research question, creating a logical and cohesive framework for your study. By establishing this alignment, you can maintain a clear focus on the research objectives and make meaningful contributions to the field.

When setting objectives for your research, it is important to consider their feasibility. Feasibility refers to the realistic achievability of your objectives within the scope of your PhD research, taking into account available resources, time constraints, and other practical limitations.

Example: Suppose your research focuses on developing a new algorithm for real-time video processing and analysis. Here are examples of objectives that consider feasibility:

Objective 1: Implement the real-time video processing algorithm on a high-performance computing cluster.

• Feasibility Considerations: Before setting this objective, assess whether you have access to a high-performance computing cluster and the necessary resources (e.g., hardware, software, computational power) to support the implementation and testing of the algorithm. If such resources are available within your research environment or institution, this objective is feasible.

Objective 2: Collect and annotate a large-scale video dataset for algorithm training and evaluation.

• Feasibility Considerations: Consider the practical aspects of collecting and annotating a large-scale video dataset. Evaluate the time, manpower, and equipment required for this task. Assess whether you have access to the necessary resources (e.g., cameras, storage, annotation tools) and the capability to manage and process such a dataset. If these resources and capabilities are available within your research context, this objective is feasible.

Objective 3: Collaborate with industry partners to obtain real-world video data for testing and validation.

• Feasibility Considerations: Evaluate the feasibility of establishing collaborations with industry partners to obtain real-world video data. Consider factors such as data sharing agreements, legal and privacy considerations, and the willingness of industry partners to provide access to their data. Assess the potential challenges and limitations that may arise during this collaboration process. If such collaborations are feasible and can be established within the constraints of your research, this objective is feasible.

By considering feasibility, you ensure that your objectives are realistically achievable within the resources, time, and other constraints of your PhD research. It helps you avoid setting objectives that are too ambitious or beyond the scope of what you can reasonably accomplish.

Feasibility assessment is crucial in ensuring the successful completion of your research project. It allows you to allocate resources effectively, manage your time, and avoid potential pitfalls or setbacks that could hinder your progress. By setting feasible objectives, you can maintain a practical and manageable research plan that is more likely to lead to meaningful outcomes within the given constraints.

In summary, considering feasibility when setting objectives in computer science research is essential. Assess the available resources, time constraints, and practical limitations to ensure that your objectives are realistically achievable within the scope of your PhD research. By doing so, you can plan and execute your research effectively, making the most of the resources at your disposal and increasing the likelihood of successful outcomes.

Once you have defined your aims and objectives for your research, it’s important to review and refine them to ensure clarity, coherence, and logical flow. This step allows you to make any necessary revisions to ensure that your aims and objectives accurately reflect the scope and purpose of your research.

Example: Suppose your research in computer science focuses on developing a mobile application for enhancing cybersecurity awareness among smartphone users. Here’s an example of reviewing and refining aims and objectives:

Aim: Develop a mobile application for enhancing cybersecurity awareness among smartphone users.

Objective 1: Conduct a comprehensive literature review on cybersecurity awareness strategies and mobile application design principles.

• Review and Refinement: Upon review, you find that the objective is clear and aligned with the aim. However, you decide to refine it to include specific aspects you intend to cover in the literature review, such as user education techniques, persuasive design elements, and existing cybersecurity awareness mobile applications.

Objective 2: Design and develop a user-friendly mobile application prototype that delivers educational content and interactive features.

• Review and Refinement: During the review, you realize that the objective lacks specificity regarding the educational content and interactive features. You refine it to explicitly mention the inclusion of topics like phishing prevention, password management, and interactive quizzes to reinforce learning.

Objective 3: Conduct usability testing and collect feedback from potential users to evaluate the effectiveness of the mobile application.

• Review and Refinement: While reviewing, you realize that the objective could benefit from additional information. You refine it to include details such as the target user group (e.g., smartphone users aged 18-35), the number of participants you plan to involve in the usability testing, and the specific metrics you will use to evaluate the effectiveness of the application.

By reviewing and refining your aims and objectives, you ensure that they accurately capture the scope and purpose of your research. It helps you identify any gaps, ambiguities, or areas that need further clarification. Through this process, you can enhance the clarity, coherence, and logical flow of your aims and objectives, making them more robust and aligned with your research goals.

Additionally, reviewing and refining your aims and objectives allows you to align them with the current state of knowledge in the field. As you conduct literature reviews and gain more insights into existing research, you may discover the need to make adjustments to your aims and objectives to reflect the most relevant and up-to-date information.

In summary, reviewing and refining aims and objectives in research is essential to ensure clarity, coherence, and logical flow. By carefully reviewing each aim and objective, you can identify areas for improvement, refine them to include specific details, and align them with the current state of knowledge in the field. This process enhances the accuracy and effectiveness of your aims and objectives, providing a strong foundation for your research.

Once you have developed your aims and objectives for your research, it is important to seek feedback from your supervisor or peers. Sharing your aims and objectives with others allows you to gather valuable insights, suggestions, and perspectives that can help refine and improve your objectives, ensuring they are appropriate and aligned with your research.

Imagine you have formulated the following objectives for your computer science research on developing an intelligent tutoring system:

Objective 1: Conduct a literature review on existing intelligent tutoring systems and their effectiveness in enhancing student learning outcomes.

Objective 2: Design and develop an adaptive learning algorithm to personalize the tutoring experience based on individual student needs.

Objective 3: Implement a user-friendly interface for the intelligent tutoring system that provides an intuitive and engaging learning environment.

Objective 4: Evaluate the effectiveness of the developed intelligent tutoring system through a series of user studies and compare it with traditional tutoring methods.

At this stage, it would be beneficial to share your aims and objectives with your supervisor or peers to receive feedback. They can provide valuable insights and suggestions to help you refine and improve your objectives. For example:

• Your supervisor may suggest including a specific research question to further clarify the focus of Objective 1, such as “What are the key features and techniques used in successful intelligent tutoring systems?”
• Peers may provide feedback on the clarity and specificity of Objective 2, suggesting adding details on the specific adaptability mechanisms to be incorporated.
• Your supervisor might suggest considering the inclusion of usability testing as part of Objective 3 to ensure the interface meets the needs and preferences of the target users.
• Peers may offer suggestions on additional evaluation metrics or experimental setups to strengthen Objective 4 and provide more robust comparisons.

By seeking feedback, you open yourself up to constructive criticism and valuable perspectives that can help enhance the quality and effectiveness of your aims and objectives. Feedback from experienced researchers or knowledgeable peers can help you identify any potential gaps or weaknesses in your objectives and provide suggestions for improvement.

Remember that feedback is an iterative process, and it is important to carefully consider the suggestions provided while also critically evaluating them in the context of your research. Incorporating constructive feedback will help you refine your aims and objectives, ensuring they are robust, relevant, and aligned with your research goals.

In summary, seeking feedback on your aims and objectives is a valuable step in the process of developing your research. Sharing your objectives with your supervisor or peers allows you to gather insights, suggestions, and perspectives that can help refine and improve your objectives. Feedback helps ensure that your objectives are appropriate, clear, and aligned with your research goals, ultimately strengthening the overall quality of your research.

When writing your dissertation, it is crucial to properly document and present your aims and objectives. The placement and presentation of aims and objectives play a significant role in providing readers with a clear understanding of the research’s purpose and direction.

Placement: The aims and objectives of your research should be presented early on in your dissertation, typically within the introduction chapter. This allows readers to grasp the overall scope and intent of your research from the beginning. Placing them in the introduction helps set the context and provides a roadmap for the rest of the dissertation.

Presentation: When presenting aims and objectives, it is important to clearly distinguish between the two and articulate their role in driving the research. Here’s an example of how you can document aims and objectives:

Aims: Start by presenting the overarching aim of your research, which represents the primary goal or intention of your study. It should be a concise statement that captures the essence of your research focus.

For example:

Aim: The aim of this research is to develop a machine learning-based system for automated sentiment analysis in social media data.

Objectives: Following the aim, present a list of specific objectives that outline the key steps or milestones required to achieve the aim. Each objective should be clear, specific, and measurable. Here’s an example:

Objectives:

• Analyze existing sentiment analysis techniques and methodologies in the literature to identify their limitations and challenges.
• Collect and preprocess a large dataset of social media posts to serve as the training and evaluation data for the sentiment analysis system.
• Design and implement a machine learning algorithm capable of accurately detecting sentiment polarity in social media text.
• Evaluate the performance of the developed sentiment analysis system against existing state-of-the-art approaches, using appropriate evaluation metrics.
• Optimize the system for scalability and efficiency, allowing it to handle large volumes of real-time social media data.

By clearly documenting the aims and objectives in your dissertation, you provide readers with a clear understanding of the purpose and direction of your research. This enables them to follow your thought process and evaluate the relevance and significance of your study. Aims and objectives serve as guideposts that help readers navigate through your dissertation and understand the specific research questions you seek to address.

Moreover, the well-documented aims and objectives help you maintain focus throughout your research journey and provide a framework for organizing your dissertation. They establish the foundation upon which your methodology, analysis, and conclusions are built.

In summary, when documenting aims and objectives in a dissertation, it is important to place them in the introduction chapter and clearly present their role in guiding the research. Aims and objectives should be distinct, with the aim of capturing the overarching goal and the objectives outlining the specific steps or milestones to achieve it. By effectively documenting aims and objectives, you provide readers with a clear understanding of the research’s purpose and direction, facilitating their engagement with your work.

Crafting clear and well-defined aims and objectives is a critical aspect of writing a PhD or Post Graduate dissertation. These aims and objectives provide a solid foundation for your research, guiding your efforts and ensuring a focused and coherent study. Through this discussion, we have explored the importance of aims and objectives in a PhD dissertation and how they contribute to the research process.

Upcoming Events

• Visit the Upcoming International Conferences at Exotic Travel Destinations with Travel Plan
• Visit for  Research Internships Worldwide

Recent Posts

• How to Put Research Grants on Your CV ?
• How to Request for Journal Publishing Charge (APC) Discount or Waiver?
• Do Review Papers Count for the Award of a PhD Degree?
• Vinay Kabadi, University of Melbourne, Interview on Award-Winning Research
• Do You Need Publications for a PhD Application? The Essential Guide for Applicants
• All Blog Posts
• Research Career
• Research Conference
• Research Internship
• Research Journal
• Research Tools
• Uncategorized
• Research Conferences
• Research Journals
• Research Grants
• Internships
• Research Internships
• Email Templates
• Conferences
• Blog Partners
• Privacy Policy

Copyright © 2024 Research Voyage

Design by ThemesDNA.com

404 Not found

• Productivity

What are SMART goals and how to use them in your research?

• July 21, 2020
• No Comments

Success is a journey, not a destination. How to set SMART goals for your research project to successfully deliver your PhD and enjoy the process.

• Share on Facebook
• Share on Twitter
• Share on Pinterest
• Share on Linkedin

Have you ever missed a deadline or struggled to hand in your work on time? 

Did you promise yourself that you were going to make it this time, yet it happened again? After all, you planned to complete the chapter of your thesis or send the paper for review to the journal. 

Yet, regardless of your willingness to do so, you didn’t do it. Another week has passed, and you feel like you’re in the exact same place as a week ago?  Uncertainty of research doesn’t make it easier, does it?

I feel for you! It happened to me, too – it was so frustrating when I had to pull an all-nighter to submit my work on time! 

That’s why in this article, I’m going to teach you how to use SMART goals in your research project and adjust them to your needs. 

I’m confident that this will help you manage your work better and meet your deadlines, especially those you set yourself!

Why do you even need goals in your research project (and life)?

We all need something to look up to in our lives. Having a purpose in your life can help you focus on what’s really important. We all have dreams that we wish came true, plans for the future, and hopes for better tomorrow.

But we sometimes get too focused on what is the final line, and we lose sight of happening in between. Remember:

success is a journey, not a destination.

Enjoy everything that’s between you now and you in the future when you’ll achieve your goals. If you want to finish your PhD – I encourage you to enjoy the process and experience as much as you can throughout your programme! 

After you finish your doctorate, there’s more life to live!

For example: 

If you want to lose weight, what do you do? You usually set the plan for what you’re going to eat and for your workout. You also set the timeline and regularly measure your progress (i.e. counting calories and completed workouts). There’s a lot of methods, even apps which might help you to achieve and track your goal. 

If you want to travel in some nice, what do you do? You usually check your bank account and try to figure out how much money you need to save. Then you set the plan for how to get the money, when to buy the tickets, how to travel on the place you’re dreaming of visiting. 

In short, to achieve something, you set yourself a goal that will make you happy. If you really want to travel, you’ll be motivated to put the effort to explore the travel routes and plan the perfect trip – regardless of the budget. If you really want it, you’ll always find a way to achieve your goal!  

And you know what? This process works in your PhD too! There’s no difference if you want to finish your PhD, chapter, assignment or paper! All you need is the clearly defined goal that will help you answer the following questions: what, why, how, and when?   

How to use SMART goals in your research project? 

SMART goals it’s a kind of a mystery concept created by marketers.

When I heard about it for the first time, I was really curious how this concept works (and whether it works at all!).

Let me show you how does it work.

SMART is an acronym that can be expanded as:

Right, this all read great and it’s just another fancy concept you can use in your PhD. 

But, what does it really mean to you? 

SPECIFIC – analyse your project and identify the specific action that you want to complete. To “write a PhD” is a massive project you won’t finish in a week time. You may also be easily overwhelmed by how much work you’d need to put in to achieve such a goal. However, if you use “write a chapter” or “write 3 pages” as your goal, these are much more specific and much easier to swallow. Try to answer – what do you want to accomplish? – why it is important to you?

MEASURABLE – think about how you can measure your progress towards achieving your goal? It’s important to find the way to do so – even it is just simple “tick the box” list, number of pages/words per day and so on. Having a way of measuring your progress will keep you motivated to achieve your goal!

ACHIEVABLE/ASSIGNABLE – This is a crucial part of your success! It’s easy to set a very ambitious plan and then try to work as hard as you can only to let it go because the goal seems to be too big to achieve in the set timeframe. Instead, be realistic about what you can achieve. Don’t set the bar too low just to achieve something either. It’s always good to push yourself a little bit to grow, but not too hard. It’s easier to set your goals as steep, yet achievable steps and then just take one at a time to reach the peak of your research project!

RELEVANT – try to find the most realistic scenario for your case. It’s a good time to check if the goal really matters to you, whether it’s important for your research or would help you to push your work forward. Sometimes it’s worth to change the direction at the very beginning of the project, rather than lose time!

TIME-BOUND – it’s important to choose the specific time by when you need to achieve your goal. It’s not measurable and time-bound if you’ll say you’ll complete it “some time next year” or “in the future”. Instead, be very specific about when you want to complete your work, for example “by 20th this month”, “in six months from now”. Try to forecast possible delays and the time for corrections, and factor these in your deadline! We all have days that things just don’t work for us! And it’s okay as long as you factored such delays in your schedule, giving you sufficient time to finish your project.

Examples of SMART goals for your research project

Although you know the concept of SMART goals now, I include some examples of such goals that you can use in your research project. 

• To write 10 pages on carbon capture technologies for the literature review chapter by 20 August 2020
• To prepare 10 slides on the project for the day before the review meeting on 31 August 2020
• To answer all the questions raised by the reviewers on the manuscript entitled “hydrogen production from renewables” and write a response to reviewers document by 5 September 2020.

Here are some more job-related SMART goals by Indeed .

I trust you get the gist of it now. Remember, the more you practice, the better you’ll become at setting the SMART goals and the more you’ll enjoy your research project.

Additional tricks for using SMART goals in your research project

Here are some additional tricks and tips I developed throughout my career: 

1. Try to plan in from big to small – if you want to write a PhD, try to divide it in small pieces, write it down step by step, as small steps as you need. 

Remember, no step is too small! You can use all the time you have if you even will spend 20 minutes a day to read something. You’ll be 20 minutes further in your work! For each week you’ll get extra 2h of your work done!

2. WRITE YOUR GOAL DOWN AND PUT IN VISIBLE PLACE! Our memory has short spans, so it’s a good idea to write down everything that’s important for you now. Having your goals in a visible place will help you to keep track of and prioritising them. 

3. The concept of 3 MONTHS YEAR – it’s quite a big thing, but to sum it up quickly – it’s the concept of planning your work just a 3 month ahead. It’s easier to measure the progress and easier to set the goals if you just consider such time frame. You’ll also get a feeling you’re in charge of your research project and the time you spend on your PhD. 

A final word…

If you want to achieve success in your research career, you need to clearly define what you want to achieve. Without goals, you’ll not know when you’ll get to where you want to get in the first place. 

Success is a journey, not a destination after all. 

Using SMART goals, which stand for Specific, Measurable, Achievable, Relevant and Time-bound, can help you focus and prioritise work in your research project and PhD. 

Make sure you write down your SMART goals and place them in a visible location so that you could keep track of them. 

I’d love to hear about the SMART goals you set for your project. Share them in the comments! 

Join Motivated Academic's newsletter

Get a weekly newsletter with newest information, promotions and extra tricks! Get ebook 25 ways to share your research for free!*

*By subscribing to our newsletter you agree with the privacy policy of the Motivated Academic. You can unsubscribe anytime.

What does academic success mean and how to achieve it?

How to motivate yourself when writing a research article?

Are hidden feelings of fraudulence stealing your confidence in academia how to finally overcome imposter syndrome, like this article.

Leave a comment

Struggling with writing?

Paper Writing Masterclass is the only solution to your problem.

Learn a proven step-by-step path and start publishing your work in the best journals in your area!

Submission received, thank you!

Privacy overview.

Work Life is Atlassian’s flagship publication dedicated to unleashing the potential of every team through real-life advice, inspiring stories, and thoughtful perspectives from leaders around the world.

Contributing Writer

Work Futurist

Senior Quantitative Researcher, People Insights

Principal Writer

How to write SMART goals

It’s easier to succeed when you have clearly defined objectives that are based in reality.

Get stories about tech and teams in your inbox

5-second summary

• Teams often fall short of meeting their goals due to a lack of consensus on the definition of success.
• SMART goals use a specific set of criteria to help ensure that objectives are clearly defined and attainable within a certain timeframe.
• Working through each step of creating a SMART goal can reveal instances where priorities and resources are out of alignment.

Meet Jane. She’s a product manager at a mid-sized tech company – let’s call it Techfirm, Inc. Jane has been tasked with increasing usage of Techfirm’s mobile app.

She knows she’ll need all hands on deck to make this happen, but when Jane has set team-wide goals in the past, they’ve quickly fallen off track. Nobody seemed to have a clear understanding of what success should look like; progress wasn’t monitored closely enough, and inevitably, that important objective slipped to the back burner (before toppling off the stove entirely).

That’s why, this time around, Jane plans to leverage SMART goals for setting an action plan and staying the course.

Want to get started right now?

Use our template to define the different components of your SMART goal.

What are SMART goals?

The SMART in SMART goals stands for Specific, Measurable, Achievable, Relevant, and Time-Bound.

Defining these parameters as they pertain to your goal helps ensure that your objectives are attainable within a certain time frame. This approach eliminates generalities and guesswork, sets a clear timeline, and makes it easier to track progress and identify missed milestones.

An example of a SMART-goal statement might look like this: Our goal is to [quantifiable objective] by [timeframe or deadline]. [Key players or teams] will accomplish this goal by [what steps you’ll take to achieve the goal]. Accomplishing this goal will [result or benefit].

Let’s use Jane’s objective to work through each component.

S: Specific

In order for a goal to be effective, it needs to be specific. A specific goal answers questions like:

• What needs to be accomplished?
• Who’s responsible for it?
• What steps need to be taken to achieve it?

Thinking through these questions helps get to the heart of what you’re aiming for. Here’s an example of a specific goal Jane might come up with:

Grow the number of monthly users of Techfirm’s mobile app by optimizing our app-store listing and creating targeted social media campaigns.

M: Measurable

Don’t underestimate the outsized impact of short-term goals

Specificity is a solid start, but quantifying your goals (that is, making sure they’re measurable) makes it easier to track progress and know when you’ve reached the finish line.

Jane and her product team want to grow the number of their mobile app users – but by how much? If they get even one new signup, that’s technically positive growth – so does that mean they’re done? Same goes for their strategy – how many platforms will they advertise on? 

To make this SMART objective more impactful, Jane should incorporate measurable, trackable benchmarks.

Increase the number of monthly users of Techfirm’s mobile app by 1,000 by optimizing our app-store listing and creating targeted social media campaigns for four social media platforms: Facebook, Twitter, Instagram, and LinkedIn.

A: Achievable

This is the point in the process when you give yourself a serious reality check. Goals should be realistic –  not  pedestals from which you inevitably tumble. Ask yourself: is your objective something your team can reasonably accomplish?

Jane might look at her goal and realize that, given her small team and their heavy workload, creating ad campaigns for four social platforms might be biting off more than they can chew. She decides to scale back to the three social networks where she’s most likely to find new clients.

Increase the number of monthly users of Techfirm’s mobile app by 1,000 by optimizing our app-store listing and creating targeted social media campaigns for three social media platforms: Facebook, Twitter, and Instagram.

Safeguarding the achievability of your goal is much easier when you’re the one setting it. However, that’s not always the case. When goals are handed down from elsewhere, make sure to communicate any restraints you may be working under. Even if you can’t shift the end goal, at least you can make your position (and any potential roadblocks) known up-front.

R: Relevant

Here’s where you need to think about the big picture. Why are you setting the goal that you’re setting? Jane knows that the app is a huge driver of customer loyalty, and that an uptick in their app usage could mean big things for the company’s bottom-line revenue goals. Now she revises her statement to reflect that context.

Grow the number of monthly users of Techfirm’s mobile app by 1,000 by optimizing our app-store listing and creating targeted social media campaigns for three social media platforms: Facebook, Twitter, and Instagram. Because mobile users tend to use our product longer, growing our app usage will ultimately increase profitability.

T: Time-bound

To properly measure success, you and your team need to be on the same page about when a goal has been reached. What’s your time horizon? When will the team start creating and implementing the tasks they’ve identified? When will they finish?

SMART goals should have time-related parameters built in, so everybody knows how to stay on track within a designated time frame.

When Jane incorporates those dates, her SMART goal is complete.

Grow the number of monthly users of Techfirm’s mobile app by 1,000 within Q1 of 2022. This will be accomplished by optimizing our app-store listing and creating targeted social media campaigns, which will begin running in February 2022, on three social media platforms: Facebook, Twitter, and Instagram. Since mobile is our primary point of conversion for paid-customer signups, growing our app usage will ultimately increase sales.

Knowing how to set goals using the SMART framework can help you succeed in setting and attaining goals, no matter how large or small.

Get stories like this in your inbox

Advice, stories, and expertise about work life today.