![technical presentation tips virtualspeech-logo](https://virtualspeech-com.b-cdn.net/wp-content/uploads/virtualspeech-logo-1.png#136)
Improve your practice.
Enhance your soft skills with a range of award-winning courses.
![](http://help4study.online/777/templates/cheerup1/res/banner1.gif)
7 Steps to Delivering a Technical Presentation
June 21, 2021 - Dom Barnard
So you want to share the fruits of your technical labor with a presentation? Perhaps, you’re an engineer, a maker, a coder, or a designer, and you’re looking to discuss a research study, explain a process, or demonstrate a product.
Regardless of the agenda, speaking to a group can be intimidating. However, there are steps you can take to deliver an effective technical presentation that gets your point across and appeals to the audience.
Whether you’re presenting in person or via web conferencing software , the following tips and best practices will help you be prepared, feel more confident, and set up the tools you need to conduct your presentation without any issues.
Know your subject matter
A great presentation isn’t about reading a bunch of slides – your attendees are capable of reading much faster on their own.
If you are going to pack your slides with dozens of details and bullet points, you might as well ditch the slides and write an article instead. It’s difficult for the audience to listen to a presenter and read a lot of information at the same time.
Your job as a presenter is to be the expert that your attendees expect you to be. Keep your slides simple and minimal. In fact, 91% of people say that well-designed slides help boost their confidence when giving a presentation.
Remember that your slides are not the star of the show, you are. Help your audience understand and make sense of what they are reading in your slides. To do this, make sure you are using a suitable structure for your presentation.
You can do these things only when you’re well-versed in what you’re presenting. The slides are supposed to be your outline, or simply a table of contents to remind you what to cover during the presentation.
Know your audience
Knowing your audience is crucial for any presentation, but it’s even more important for a technical one. If your audience is as experienced and comfortable with the topic of your presentation as you are, then you don’t want to dumb it down to the extent that it bores them.
On the other hand, you don’t want to give a complex presentation to an audience with no clue of what you’re talking about.
There may also be times when your attendees are people with different levels of technical skill, experience, and interests. Then your job is to make sure that the content of your presentation is relevant and doesn’t alienate any of those segments.
![technical presentation tips Presentation relevance](https://vs-static.virtualspeech.com/img/blog/presentation-relevance.jpg)
Image Source: Digital Clarity Group
To understand how technical you need to be, consider what your audience might already know and how much is required for them to understand to meet your goal.
If your objective is to acquire funding, for instance, your audience will be more interested in financial benefits than the technical details of your product. The idea is to meet the needs of your audience, not to fuel your passion for engineering.
Configure your IDE
Since you’re delivering a technical presentation, there may be instances where you’ll want to walk your audience through your development environment, code scripts, software demos, or other technical components.
However, you may have adjusted how things look on the screen according to what’s the most convenient for your usual workflow. And what’s good for working in your day-to-day routine may not render well as you go full screen in presentation mode.
![technical presentation tips Visual studio IDE](https://vs-static.virtualspeech.com/img/blog/visual-studio-ide.jpg)
If the attendees can’t decipher what’s on the screen, they’ll get confused and will find it hard to focus on your talk. So it’s important that you customize whatever you’re going to show in your presentation such that it’s easily readable and viewable.
There are several steps you can take to make this happen. First of all, don’t use dark backgrounds. Light-colored backgrounds are easy on the eyes. Second, adjust your font styles and sizes to make sure they’re big enough.
And finally, learn to zoom in on specific areas as required, depending on whether you’re using a Windows PC or a Mac system .
Practice Presentation Skills
Improve your public speaking and presentation skills by practicing them in realistic environments, with automated feedback on performance. Learn More
Minimize distractions
Nothing is more annoying than to keep getting disruptive notifications or popups from in the middle of your presentation. These can be from your operating system (Windows or Mac), or apps such as Slack, Email, Twitter, and more.
At times, these notifications can be personal, embarrassing, or contain confidential information that you don’t want your audience to see.
Therefore, it’s best to make sure in advance that there are no unpleasant surprises. Before you get up to give your presentation, turning off your notifications can go a long way.
This will also reduce the number of processes running on your machine and free up available resources. As a result, the resource-intensive programs that are part of your presentation will run a lot smoother. Here’s how to turn off notifications for Windows , Google Chrome , and Mac .
Get the right equipment
If you want to be a master presenter, you should have the proper tools for the job. The basics include a desktop or laptop machine with good configuration, a big display screen, presentation software (usually MS Powerpoint or Keynote), and a clicker/pointer device.
A clicking device, like the Logitech Wireless Presenter , can help you switch slides from wherever you are in the room, point to a specific part of a slide, and add an overall professional touch to your presentation.
In addition, you should have any cables (HDMI, VGA, USD, etc) and adapters required to connect the devices you are going to use for the presentation.
![technical presentation tips Conrad delock adapter](https://vs-static.virtualspeech.com/img/blog/conrad-delock-adapter.jpg)
Conrad Delock USB 3.0 Network adapter
If you have no idea about what will be available at your presentation venue, then carry one piece of each of the commonly used cables and adapters. You’ll thank us later.
Rehearse in advance
Practice your slides and your demo multiple times before the presentation, even if you have presented the exact same thing in the past. Do not make any assumptions about your actual presentation environment based on your practice environment.
Technologies and situations change, and you may find things that catch you off guard. Run through everything at least once the night before just to be sure.
![technical presentation tips Practice presentations in VR](https://vs-static.virtualspeech.com/img/blog/meeting_speech_with_presentation_slides_vr.jpg)
Practice your presentations with interactive exercises .
Even better if you can record yourself during these rehearsal presentations and watch the recordings later to find areas of improvement.
Also, if you’re relying on downloading or doing something in front of the audience that may require a high-speed internet connection, don’t assume you’ll have access to such a network during your presentation. Download and install whatever you need ahead of time.
Finally, enjoy the experience
You’re giving a technical presentation, but that doesn’t mean it has to be boring, or that you have to be serious all the time as you talk.
It’s okay to have fun, crack some jokes, tell a story , ask a rhetorical question or invite participation from the audience when presenting. In fact, a study showed that presentations that don’t let the audience participate see a drop of 14% in engagement.
Don’t worry too much about things going wrong. See every presentation as a dialogue with your attendees and an opportunity to learn and be a better presenter. If you are enjoying yourself, so will your audience.
![technical presentation tips REGISTER NOW](https://no-cache.hubspot.com/cta/default/258322/6c40daea-7389-45a1-9def-71570b47265e.png)
- PowerSpeaking ® Get an Expert Foundation
- HighTechSpeaking ® Make Technical Data Come Alive
- Speaking Up: Presenting to Decision Makers ® Win Over Senior Executives
- SalesSpeaking ® Make the Sale
- ConferenceSpeaking™ Prepare for a Speaking Event
- Be Clear, Be Confident, Be Courageous Confident Speaking for Women
- Storytelling Course Tell Stories that Captivate
- Facilitation
- Facilitators
- Management & Staff
- Board Members
- Learning Hub
- PowerSpeaking Live!
Presentations
Communication, facilitation, targeted learning, powerspeaking blog: tips and strategies for crafting presentations, deliver more powerful technical presentations: 8 techniques.
by Ralf Wolter Aug 4, 2022 1:36:00 PM
![technical presentation tips Blog Feature Image](https://blog.powerspeaking.com/hs-fs/hubfs/Blog%20Feature%20Image.jpg?width=1365&name=Blog%20Feature%20Image.jpg)
Before moving into training and coaching, I was an IT Consulting Engineer for 25-plus years. To this day, I have a left-brain bent. But I remember the experience that changed my perspective on what makes a powerful technical communicator (hint: it involves both hemispheres).
I was watching a very senior engineer at Cisco give a technical presentation. This engineer was so senior and well-regarded, he held a prestigious Fellow position at the high-tech company.
What struck me was that he was so good at illustrating his points and keeping the audience rapt. I approached him after his talk and asked him, ‘What’s your secret sauce?’ He said, ‘Whenever I give a technical talk, I start by explaining in a way that my mum would understand it.’
I really liked the way he dove into deep technical detail only after he introduced the concepts with brief, compelling stories and vivid analogies. To me, that was a perfect way to make sure everyone understands what you’re talking about, without dumbing down the content.
What I’ve learned since then is that this kind of approach to technical presenting doesn’t take away from the content expert’s credibility; as a matter of fact, it adds to it, especially if they’re addressing a mixed audience.
Delivering clear, complex data in a meaningful way to the people and businesses impacted is more important than ever—at work and in our communities.
To do it well, you might need to rethink some of the hallmark left-brain preconceptions about how to craft and deliver your talk. But trust me, it’s well worth the journey.
Here are our top pointers . . .
1. Start With Your Audience in Mind
Who are you presenting to, and how is your main message or proposal relevant to them? How much detail do they really want or need? Your technical peers might be happy to dive into lots of detailed data. But how about a mixed audience of engineers, salespeople, and potential customers? Or maybe senior executives , who just want the bottom line?
For example, let’s say you’re presenting to a mixed audience. The best strategy would be to organize your presentation so you begin with a big-picture overview and main message/proposal for the non-technical people; then a strategic level of detail for technical managers and technical specialists outside your area; and last, a deep dive for content experts who are familiar with your work.
![technical presentation tips powerful-presentations-1](https://blog.powerspeaking.com/hs-fs/hubfs/powerful-presentations-1.png?width=624&height=474&name=powerful-presentations-1.png)
Senior-level executives prefer content focused on the overall impact of your data or proposal: the cost, ROI, and benefits. They want the high-level view, with executive summaries, solutions, and future business implications. (Check out our downloadable PDF, “ How to Present to Executives: 23 Proven Tips ”)
Non-technical audiences and technical people in different disciplines also appreciate higher-level content. In addition, they typically want to know how what you’re presenting will affect them directly. Will it impact their workload or priorities? Will it delay other projects they’re working on? Will it shift roles or responsibilities?
Technical audiences want content rich in detailed data analysis, design specifications, theory, and statistics. They expect you to know the jargon and to use technical terms. They want to know about the research behind your data, and they appreciate information such as algorithms, process-flow diagrams, feature lists, and coding examples.
One presenter we worked with noted that with mixed audiences, he starts by announcing, "Today, I'll be doing a split-level presentation. The first 10 minutes will be a big-picture, market-focused summary. In the next 10 minutes, I will provide an overview of the technology involved. In the last 10 minutes I will go into the detail and present the results of our code review. Feel free to leave before the next level of detail if that is not what you want."
So remember, consider your audience before you get too far in crafting your presentation. By doing so, you will be more . . .
Engaging By directing your presentation to the audience’s needs, you’ll increase attention and retention.
Efficient By creating an audience-centric presentation from the start, you’ll find it easier to plan and deliver a relevant and memorable talk.
Effective By communicating an action the audience can take as a result of the presentation, you’ll have a greater impact (we go into this in “Identify an Action Step,” below).
Here’s a helpful Audience Analysis checklist we developed for workshop participants.
Next, what do you want the audience to do with the data you’re presenting?
2. Identify an Action Step
Once you’ve analyzed your audience, the next best step is to ask yourself, "What do I want the audience to do, think, or feel as a result of hearing this presentation?"
One common mistake many presenters make is to assume the audience understands what they’re being asked to do. Unless your request is clear and concrete, you risk creating confusion and losing their support.
Here are some quick examples of effective vs. ineffective action steps . . .
![technical presentation tips powerful-presentations-2](https://blog.powerspeaking.com/hs-fs/hubfs/powerful-presentations-2.png?width=624&height=484&name=powerful-presentations-2.png)
Now it’s time to dive into the core content of your presentation . . .
3. Develop a Clear Main Message
Even if you have complex ideas or data to discuss, your presentation should have a clearly stated central purpose or key message. Why are you presenting the data? What do you want your audience to remember?
A short, clear, and compelling main message accomplishes several important things . . .
![technical presentation tips powerful-presentations-3](https://blog.powerspeaking.com/hs-fs/hubfs/powerful-presentations-3.png?width=624&height=468&name=powerful-presentations-3.png)
Here are some best practices for developing your main message so it’s clear and memorable . . .
As PowerSpeaking, Inc. Master Facilitator Rita Williams emphasized in the video, repetition of your main message—word for word—is key. Research has shown that people are much more likely to retain your clear, concise main message if you repeat it at least three times throughout your presentation, at the beginning, middle, and end.
Once you’ve analyzed your audience, identified an action step, and crafted your main message, it’s time to turn to the substance of your presentation . . .
4. Make Your Content Relatable and Memorable
Maybe you want to get a group of teams fired up about the next phase of product development. Perhaps you need to enlist support from other departments to make a system change. Or maybe your team needs budget approval from senior management to launch a new project.
No matter your purpose, you’re far more likely to succeed if you help your audience relate to your content and remember (and maybe act on) it after the presentation is over.
We’ve found that the best way to do that is to craft a technical presentation that balances analytical and anecdotal evidence— and connects with people on a human level.
Analytical Evidence: Facts and Figures
Analytical evidence is typically evidence drawn from statistical information—especially data collected by systematic methods. for example, the number of component failures reported in a quarter, the percentage of people who had adverse reactions to a new drug, or the roi on a new service offering over a specified period of time would all be considered analytical data. , anecdotal evidence: stories, analogies, case studies, examples.
Anecdotal evidence tells a story rather than drawing solely on numbers or percentages. Examples: A story about how a seriously ill patient responded to a new drug, reading a letter from a satisfied customer, or talking about an experience you had when calling your own company for customer service.
Some technical people in our workshops bristle at the idea of storytelling or, as they’ll say, “trying to be entertaining.” But being an entertainer isn’t the point here. The point is that we’re all human, and images, metaphors, and stories spark our interest and lodge in our memories more easily than facts and figures alone.
“In fact, the thickness of the Earth's atmosphere, compared with the size of the Earth, is in about the same ratio as the thickness of a coat of shellac on a schoolroom globe is to the diameter of the globe. That's the air that nurtures us and almost all other life on Earth, that protects us from deadly ultraviolet light from the sun, that through the greenhouse effect brings the surface temperature above the freezing point.”
In his book “Actual Minds, Possible Worlds,” psychologist Jerome Bruner estimated that facts are about 22 times more memorable when they are delivered via a story.
When the brain sees or hears a story, it mimics the pattern of the writer’s or speaker's brain. This is known as neural coupling, where in effect, the storyteller literally shares their sensory experience with another person. (A much more memorable experience than looking at a spreadsheet in a slide presentation.)
![technical presentation tips powerful-presentations-4](https://blog.powerspeaking.com/hs-fs/hubfs/powerful-presentations-4.png?width=616&height=462&name=powerful-presentations-4.png)
“ You cannot reach a person's head without first touching their heart, and the path to the heart runs through the brain, starting with the amygdala . . . We now know which brain chemicals make us pay attention to a speaker (cortisol) and which make us feel empathy toward another person (oxytocin)." — Carmine Gallo, "Storyteller's Secret.”
“ You can’t play tennis with a bowling ball.”
So, remember that research proves you will increase the impact of your data and your message by reaching people through their hearts and minds .
Next, use the power of imagery to help people understand and remember key points . . .
5. Be Creative With Visual Aids
Whether you’re presenting in person or virtually, there are several ways you can hold people’s interest and drive home your message by getting creative with visuals.
Add Imagery to Explain Data
You already know not to clobber your audience with endless data-dense slides, right? Good. The more you can convey data/key messages via imagery, the more engaging and memorable your content will be.
![technical presentation tips powerful-presentations-5](https://blog.powerspeaking.com/hs-fs/hubfs/powerful-presentations-5.png?width=624&height=470&name=powerful-presentations-5.png)
Here are a few more examples of combining simple, powerful images with (few) words to deliver a message . . .
![technical presentation tips powerful-presentations-6](https://blog.powerspeaking.com/hs-fs/hubfs/powerful-presentations-6.png?width=624&height=494&name=powerful-presentations-6.png)
Don’t Limit Yourself to Slides
Think about introducing a variety of visual aids to make your presentation more interesting . . .
Whiteboards : A virtual whiteboard or an in-person flip-chart are still great ways to emphasize key points, capture audience feedback or questions, or explain a concept.
Props: Use props to illustrate a key metaphor or idea from your presentation. A world globe could help illustrate the global marketplace, or an apple could evoke preventive health care (“An apple a day keeps the doctor away.”)
Handouts: A handout allows the audience to take something back to work that can be used as a reference or summary of your content.
Video Clips: These are a great way to break the monotony of still slides, and often introduce a more human factor to the topic.
6. Use Pattern Disruption to Hold Attention
There’s nothing like breaking a pattern to snap people back to attention. Think of a presenter who suddenly turns off the screen or introduces music. Or how about a presenter who’s been talking for five minutes then suddenly . . . stops. Silence, for like 30 seconds. You’d look up, right?
Consider places in your presentation where people might need something fresh to keep them engaged. Some examples . . .
- Stories and analogies
- Video clips or sound recordings
- Style changes (vocal, movement, gestures, pausing)
- Blanking the screen
- Visuals (graphics, illustrations, images)
- Audience participation (small group discussion, brainstorming)
Next, let’s look at one aspect of successful presenting that causes many techies to roll their eyes: an engaging delivery style.
Stay with me. It’s relatively painless . . .
7. Don't Underestimate the Power of Style
A speaker who stands statue-still, stares at their slides or notes, and speaks in a monotone is enough to put anyone to sleep—no matter how interesting the content.
Remember, even scientists, engineers, and system programmers are human. And research has shown that we humans are moved by nonverbal communication. We “read” a lot into its presence or absence, which means it can either obscure or make clear what we’re saying out loud.
“What you do speaks so loudly that I cannot hear what you say." — Ralph Waldo Emerson
If you’re preparing to make a presentation or give a talk, it’s likely you do what most people do: focus solely on your content. While what you have to say is definitely key, how you say it—through nonverbal “language”—is a lot more important than you might think.
Research has shown repeatedly that your posture, gestures, facial expressions, and the tone and cadence of your voice play a huge role not only in getting your message across to an audience, but also, in engaging them, building trust, and increasing your credibility.
Your tone of voice, for example, has a big impact on how your content is received.
Not being able to hear a speaker, either because of poor audio or a too-soft voice, isn’t just an annoyance. In a USC study that looked at the effects of poor audio in scientific presentations, they found that, “When the video was difficult to hear, viewers thought the talk was worse, the speaker less intelligent and less likable, and the research less important.”
Speaking in a dreary monotone is another way to lose your audience. Watch how to avoid it and instead, create energy and interest . . .
source: Great Speech Writing, "How to Avoid Speaking in a Monotone," via YouTube
If you’d like more tips on making nonverbal communication work for you, check out our blog, “ Use the Power of Nonverbal Communication to Connect with Your Audience: 7 Tips .”
8. Bring Your Authentic Self to the Table
Speaking of the human factor when it comes to presentations, know that authenticity, openness, and passion go a long way in engaging your audience, building trust—and yes, even establishing your credibility.
NASA mathematician Katherine Johnson once revealed her childhood passion for numbers in a very simple, relatable way . . .
“I counted everything. I counted the steps to the road, the steps up to church, the number of dishes and silverware I washed ... anything that could be counted, I did.”
Now, if you had been in the audience when she led with that, she’d have your attention, right?
No matter how complex the data or the message, an audience-centric, authentic, human approach is a good place to start.
Join Us in Conversation . . .
![technical presentation tips ps-live-logo](https://blog.powerspeaking.com/hs-fs/hubfs/ps-live-logo.png?width=448&name=ps-live-logo.png)
Elevate Your Talk With Powerful Visuals
Thursday, september 19, 2024, 9-10:00 a.m. pt/12-1:00 p.m. et/5-6:00 p.m. bst.
![technical presentation tips Register Now](https://no-cache.hubspot.com/cta/default/258322/c0190962-34af-4c16-97b8-11a9deb65b24.png)
Rebecca Morgan
Csp, cmc, cvp, vmp.
![technical presentation tips Hala Hachem](https://blog.powerspeaking.com/hubfs/PowerSpeaking%20-%20Circle%20Speaker%20Headshot%20(15).png)
Hala Hachem
Product designer.
![technical presentation tips Dan Malloy](https://www.powerspeaking.com/hubfs/PowerSpeaking%20-%20Circle%20Speaker%20Headshot%20(8).png)
Communications Manager, Concussion Legacy Foundation
![technical presentation tips Payal Gandhi Hoon](https://www.powerspeaking.com/hubfs/sp-circle-Payal.png)
Payal Gandhi Hoon
Master facilitator and coach, powerspeaking, inc..
![technical presentation tips Karen McDonagh Reynolds](https://258322.fs1.hubspotusercontent-na1.net/hubfs/258322/karen-mcdonagh-reynolds-circle.png)
Karen McDonagh Reynolds
Transformation director & board member, london market joint ventures.
![technical presentation tips technical presentation tips](https://blog.powerspeaking.com/hs-fs/hubfs/Screen%20Shot%202022-08-04%20at%204.27.19%20PM.png?width=150&name=Screen%20Shot%202022-08-04%20at%204.27.19%20PM.png)
Ralf Wolter
Topics: Effective Technical Presentations
Don’t Miss Out on Insights!
Subscribe to PowerSpeaking Insights to get our blog, best-practice tips, special offers, and more sent directly to your inbox.
![technical presentation tips SUBSCRIBE](https://no-cache.hubspot.com/cta/default/258322/7b04bc77-7ca3-4a76-9e1c-e7389d1521ee.png)
Subscribe to PowerSpeaking Insights
![technical presentation tips ps-live-sept-24](https://blog.powerspeaking.com/hs-fs/hubfs/ps-live-sept-24.png?width=270&height=360&name=ps-live-sept-24.png)
Recent Posts
Popular posts.
![technical presentation tips CONTACT US](https://no-cache.hubspot.com/cta/default/258322/260c3bab-6be5-4469-9f21-0366a47b8bf8.png)
Address: 1233 Harrison Avenue Redwood City, CA 94062
Fax: 650-631-8660-->
SUBSCRIBE TO POWERSPEAKING INSIGHTS
Get our blog, best-practice tips, special offers, and more sent directly to your inbox.
Copyright 2024 © PowerSpeaking, Inc. All rights reserved.
![technical presentation tips Blog post cover](https://snappify.com/_next/image?url=%2Fimages%2Fblog%2Fcovers%2Ftechnical-presentation-tips.jpg&w=1920&q=50)
Craft Effective Technical Presentations: 5 Success Strategies
![technical presentation tips Avatar of Dominik Sumer](https://snappify.com/_next/image?url=%2F_next%2Fstatic%2Fmedia%2Fdominik-avatar.bfa4ad46.png&w=128&q=75)
Dominik Sumer
Aug 30, 2023 · 8 min read
Technical presentations can be tricky to execute. You know your subject inside out, but is that enough?
How do you ensure your audience stays engaged throughout the presentation, and how do you answer their questions effectively?
This blog post provides modern strategies for crafting effective technical presentations, covering all aspects, from understanding your audience to handling questions and feedback.
You will also learn about the practical parts of technical presentations, including proper tools and examples.
These tips will help you deliver a successful presentation that makes a lasting impact on your audience.
Anyone can use this guide as a checklist , but the following can get huge benefits:
- Software Engineers or Developers
- Tech YouTubers
- Candidates who are presenting in tech interviews
- Social Media Influences like tech on LinkedIn
- Students, Tech Teachers, and much more.
Identify your Audience:
![technical presentation tips Identify your audience](https://snappify.com/_next/image?url=%2Fimages%2Fblog%2Ftechnical-presentation-tips%2Fidentify-your-audience.webp&w=3840&q=75)
In our previous guide about technical writing , we shared 19 expert tips you should know.
Let me quickly highlight the five most important tips:
- Understand Audience
- Define Purpose
- Always do your research
- Organize thoughts
- Avoid Jargon and Acronyms
Understanding your audience is not a first step but why?
Because first, you need to identify WHO is your target audience.
Question it by yourself, and write down the three closest audiences like:
- JavaScript Developers: Those who want to learn about JavaScript technologies. You can help them learn the tech faster by sharing beautiful code snippets .
- SaaS Owners: Those tech founders who want to learn about the ongoing development progress of their software. Give them tips on how to tackle obstacles in software development by using technical presentation slides .
- Tech Talks: Those interested in code screencasts within the video content like YouTube or TED Talks. You can use rich animated content, like videos created with snappify.
So, identify your audience first and use the smart tools to simplify things for you and the audience.
Use Smart Tools:
![technical presentation tips Use smart tools for technical presentations](https://snappify.com/_next/image?url=%2Fimages%2Fblog%2Ftechnical-presentation-tips%2Fuse-smart-tools-for-technical-presentations.webp&w=3840&q=75)
So, what are smart tools in the digital world?
Smart Tools are intelligent software applications that help users perform complex tasks more efficiently and effectively.
They simplify processes, improve productivity, and help achieve goals quickly and easily online.
You can learn about our curated list of technical writing tools , which comes with Artificial Intelligence.
Before using your tool for technical presentations, make sure to check these features first:
- Can you create a fully animated slide?
- Is there any feature for Video Export?
- The tool must be user-friendly to avoid presentation disruptions.
- Clear and visually appealing infographics are important for tools with graphs, diagrams, or slides.
Now that you know enough about the features, here is another list of modern tools to help you become a good presenter.
- Snappify: It can help you present code beautifully and has all the features I have mentioned above. It also has pre-made templates to help you create and share snippets faster.
- PowerPoint: A user-friendly software for creating dynamic presentations with text, images, charts, and multimedia elements.
- Google Slides: A web based presentation tool that lets users create basic presentations and save them online.
Let's take a closer look at the Slides and Video Export features of snappify and how it can become your new companion for your technical presentations.
It comes with a Present button at the top of the bar, which can help you show your code snippets in the presentation mode.
In slides, there are several options for animations:
Besides showing your presentation, you can download all slides or export videos to share on social media.
You can follow this tutorial on creating code presentations with snappify .
Video Export : TypeWriter Example
Video showcasing the TypeWriter transition
Structure Your Presentation
![technical presentation tips Structure your presentation](https://snappify.com/_next/image?url=%2Fimages%2Fblog%2Ftechnical-presentation-tips%2Fstructure-your-presentation.webp&w=3840&q=75)
To craft an effective technical presentation, it is crucial to structure your content in a clear and logical flow .
Begin with an attention-grabbing introduction that captivates your audience and sets the tone for the presentation.
Organize your content into sections or chapters, making it easier for your audience to comprehend and follow along.
- Divide your presentation into key sections or points.
- Each section should have a clear focus and contribute to your main message.
- Use bullet points and concise text to support each point.
- Transition smoothly between sections to maintain a logical flow.
- Include visuals such as images, charts, graphs, animations , and videos to enhance understanding and engagement.
- Share real-life examples or case studies that illustrate your points.
- Use relevant data and statistics to back up your points and add credibility.
Finally, remember to summarize key points and provide a memorable conclusion to leave a lasting impact.
Create your next presentation
snappify will help you to create stunning presentations and videos.
This video was created using snappify 🤩
Choose a good Font and Color for the Slides
![technical presentation tips Font and colors choices in slides](https://snappify.com/_next/image?url=%2Fimages%2Fblog%2Ftechnical-presentation-tips%2Ffont-and-colors-choices-in-slides.webp&w=3840&q=75)
Font and color choices in slides play a key role in shaping the impact and effectiveness of your presentation.
These choices go beyond aesthetics; they influence how your content is perceived, understood, and remembered.
Here are quick tips to make effective font and color choices:
- Readability: Use simple, easy-to-read fonts that can be seen from far away. Avoid fancy or complex fonts that can make reading difficult.
- Consistency: For a professional look, limit your presentation to two font styles: headings and body text.
- Contrast: Use contrasting fonts for headings and body text for better readability. Headings should be in bold or larger font, while body text should be in regular font.
- Hierarchy: Establish hierarchy with color by using bold or contrasting hues for headings and more subdued tones for body text.
- Limit Bright Colors: While bright colors can add visual interest, avoid using too many as they can be distracting and make your presentation look unprofessional.
Remember that your font and color choices should support your technical content and help convey your message effectively.
Test your chosen fonts and colors on different screens to ensure they appear as intended.
Consistency in font and color usage contributes to a polished and visually appealing presentation.
Also take a look at our handcrafted templates to get started with your technical presentations.
Engage with Stories
![technical presentation tips Engage audience with stories](https://snappify.com/_next/image?url=%2Fimages%2Fblog%2Ftechnical-presentation-tips%2Fengage-audience-with-stories.webp&w=3840&q=75)
People remember stories better than facts alone.
Include relatable case studies to illustrate your points and make your presentation more relatable.
Storytelling is a powerful technique that can elevate your technical presentation from informative to captivating.
Humans have been using stories to communicate and connect for centuries, and integrating this approach into your presentation can help you create a deeper and more lasting impact on your audience.
Here's how you can effectively use storytelling to engage your audience during your technical presentation:
Quick Story Example:
![technical presentation tips Example of stories in technical presentations](https://snappify.com/_next/image?url=%2Fimages%2Fblog%2Ftechnical-presentation-tips%2Fexample-of-stories-in-technical-presentations.webp&w=3840&q=75)
Meet Maya, a talented developer on a mission to make her technical presentations truly captivating.
One day, she discovered snappify, a tool rumored to bring code snippets to life .
Maya decided to give it a shot.
With snappify, Maya's code snippets transformed into dynamic visuals that got animated smoothly across the screen.
During her presentation, she used it to break down complex algorithms step by step.
The audience was captivated, effortlessly following along as the code was visually displayed.
Impressed by Maya's presentation, fellow developers asked about snappify.
Maya shared how the tool had elevated her delivery, making code accessible to all.
Afterward, snappify was known for its captivating technical demonstrations.
Developers worldwide used it to transform complex code into interesting visuals, captivating audiences and enhancing code comprehension.
Now, turn your boring code into fancy and beautiful snippets before sharing it on social media or inside your technical presentation.
In conclusion, delivering a successful technical presentation requires technical skills, engaging visuals, and audience interaction.
A compelling story and utilizing effective visuals are crucial for delivering a memorable and impactful presentation.
Following the tips in this comprehensive guide, you can always deliver successful technical presentations for interviews, YouTube videos, tech talks, social media posts, and much more.
How can I adjust my technical presentation to different levels of expertise among the audience?
Adjust technical depth and terminology based on audience familiarity. Provide real-world examples for beginners and deeper insights for experts.
What is the difference between presentation and technical presentation?
Presentations can be either general or technical. General presentations inform or persuade, while technical presentations explain complex concepts to an audience with relevant expertise like engineering, coding, or more.
How do I overcome nervousness before a technical presentation?
Practice is key. Familiarity with your content and great rehearsal can help reduce anxiety during the presentation.
What is most important in technical presentation?
Effectively convey complex concepts with clear explanations, visuals, and relevance to the audience's needs and expertise - that's clarity.
What are the four essential components of a technical presentation?
A technical presentation has four parts: intro, content, conclusion, and Q&A. Introduce, present, summarize, and impress.
How do you engage your audience during a technical presentation?
To keep your audience engaged during a technical presentation, use relatable examples, break down complex information, and include interactive elements like polls or Q&A sessions. Personal stories can also make it more interesting.
Share Article
![technical presentation tips beautiful.ai logo](https://cdn.prod.website-files.com/59deb588800ae30001ec19c9/668f0182cf53c0bb99d207ed_BAI%20logo%3Dfull%20color%20black.webp)
The Art of the Technical Presentation: How to Present Technical Topics to Non-Technical People
![technical presentation tips](https://cdn.prod.website-files.com/59deb588800ae30001ec19c9/5f17916fcabbe55a6c78928d_Tweet%20Quote.webp)
So, you need to make a technical presentation to people outside of your field. It should be easy, right? All you have to do is let the bounty of your knowledge flow forth. But what if your message gets lost in the gap between your expertise and your audience’s point of view? Find out how to conquer the divide with an artfully designed presentation.
Although great presentations are a mix of education, communication, and collaboration, in the end, they all boil down to persuasion. Luckily, you don’t need a degree in psychology to get through to your listeners. These five tips will help you build a simple presentation that gets your message across, imparts key technical details, and leaves you and your audience feeling like you got what you needed.
Focus on your purpose
What’s the nitty gritty reason why you’re doing this presentation? Whether you’re seeking funding, partnership, a job, or a sale, you’re essentially trying to persuade your audience to take action.
What do you want them to do when they’ve heard your spiel? Remember this as you plan each step of your presentation, and make sure that every element you add contributes to your purpose. If you notice your content going off on a tangent, cut that part out. Keep it tight, and you’ll keep their attention.
Find the Gap
Once you’ve got a clear purpose in mind, think about why you need to do this presentation. There must be something that your audience doesn’t know or fully appreciate yet, because otherwise they’d already be with you.
But be careful here. A lot of us fall into the trap of thinking they need to hear everything we know. If you take the time now to tease out the information that’s critical to your message, you’ll save yourself from overwhelming your listeners and losing their support.
What’s the simplest way you can explain the difference between what they’re doing now, and what will happen if they adopt your idea? An infographic can be a powerful and succinct way to make your message hit home, and Beautiful.ai’s templates can make it easy.
One trick that will help you explain technical things in simpler terms is to empathize with your audience. What do they want to get from working with you? Let’s say you’re speaking to investors. They want a return on their investment, right? So you’ll need to highlight facts, figures, and examples that show why your proposal is going to profit them in the end. Think about who you’re speaking to, and how cooperating with you will make their lives better.
Some other common needs that your project might meet are helping your audience to save time, have less stress, or enjoy better relationships. Make sure you frame your request in terms of how it will benefit your viewers.
Images can be a powerful way to help listeners picture the results that you’re promising in vivid detail. With Beautiful.ai’s image gallery, you’ll have thousands of photos, icons, and visual elements at your fingertips that you can add to your presentation for free. You can also upload your own custom images with an effortless drag and drop.
Keep it short
Another way to make a technical topic easy to digest is to keep your presentation brief. One trick is to create an outline to distill your message into 3-5 key points. Another is to use Guy Kowasaki’s 10/20/20 rule (10 slides, 20 minutes, and a minimum of 30 font) to force yourself to be concise.
Some technical presenters check their urge to splurge by only addressing “ what ” their idea will accomplish, rather than the “how”.
And of course, you can save words and pack a stronger punch by incorporating visual elements into your presentation. Beautiful.ai has templates to help you easily build a pictograph or specialized slide with a Venn diagram, flowchart, bar graph, and more to make your point in fewer words with a greater lasting impression.
Did you know that people remember things they learned with an accompanying visual over 6x longer than information they only heard verbally?
Use good design
Although you can insert good information into any presentation maker, even the most brilliant thoughts will be lost on your audience if the styling doesn’t flow. Awkward spacing, inconsistent colors and fonts, and illegible sizing are hugely distracting to your audience and can steal your thunder in a heartbeat.
Beautiful.ai uses smart slides technology to automatically adjust these elements on every slide. Whether you work with our templates for slides and presentations or customize a look that’s all your own, no matter what images or elements you add, the rules of good design will be applied. Your slides will come out balanced and beautiful and your message will be crystal clear. It’s like having a pro designer fixing each slide as you work.
No more all-night formatting battles or embarrassing, cluttered messes. Just powerful presentations that persuade your audience and make you proud.
When all is said and done, your technical presentation can get through to non-technical people if you stay focused on your purpose, bridge the gap between what they already know and what they need to learn to get on-board with your plan, empathize with their needs, and boil your message down into its most persuasive elements.
You can make an outstanding impact with even the most technical presentations if you start with an intelligent plan and use specialized design tools like Beautiful.ai. Try it today.
![technical presentation tips Beautiful.AI Team](https://cdn.prod.website-files.com/59e16042ec229e00016d3a66/5d545b066894dd0e22909f25_B%20icon_black%20circle.webp)
Beautiful.AI Team
Beautiful is an AI-powered presentation tool that makes it fast and easy for anyone to build clean, modern and professionally designed slides that they can be proud of.
Recommended Articles
Communicate beautifully with melody wilding, sales pitch training: how to build pitch templates that will power up your junior sales team, 8 surefire ways to nail your job interview project presentation, how presentations can help in the face of economic uncertainty.
27 Super Hidden PowerPoint Tips and Tricks Only The Pros Know!
Ausbert Generoso
![technical presentation tips 27 Super Hidden PowerPoint Tips and Tricks Only The Pros Know!](https://cdn.classpoint.io/wp-content/uploads/New-Blog-Featured-Images-16.png)
Ever felt like your PowerPoint presentations could use a little magic? You’re not alone. Whether you’re a seasoned presenter or just getting started, there’s a world of PowerPoint tips and tricks waiting for you. In this guide, we’re diving into the nitty-gritty of Microsoft PowerPoint to uncover 30 hidden gems that’ll transform the way you create and deliver slides.
From making your designs pop to streamlining your workflow, these PowerPoint hacks are designed for real-world impact. No jargon, just practical insights that’ll have you presenting like a pro in no time.
Let’s cut through the noise and get straight to the good stuff – your next presentation is about to level up. Ready? Let’s get started.
27 PowerPoint Tips and Tricks That Put The Power in PowerPoint
![technical presentation tips PowerPoint tips and tricks](https://cdn.classpoint.io/wp-content/uploads/New-Blog-Featured-Images-7-1.png)
1. Morph Transition for Seamless Animation
![technical presentation tips PowerPoint Morph Transition](https://cdn.classpoint.io/wp-content/uploads/image-304.png)
What’s it for: Elevate your presentation by seamlessly animating objects and creating smooth transitions between slides. Morph transition is your key to a dynamic and visually engaging storytelling experience, allowing you to captivate your audience effortlessly.
How to do it:
- Position the same object in different parts on multiple slides
- Select all slides, and go to the Transitions tab.
- Choose “Morph” as the transition effect.
2. SVG Image Integration
![technical presentation tips SVG Image Integration PowerPoint](https://cdn.classpoint.io/wp-content/uploads/image-305.png)
What’s it for: Did you think SVG’s only work for websites and professional photo editing tools? They do, too, in PowerPoint! Import high-quality Scalable Vector Graphics (SVG). Maintain image clarity, resize without loss, and enhance your presentations with crisp logos and icons.
- Save your chosen SVG on your device.
- Click on the Insert tab.
- Choose “Pictures” and select your SVG file.
- Adjust the size without compromising image quality.
3. Designer Feature for Quick Layouts
![technical presentation tips PowerPoint Designer](https://cdn.classpoint.io/wp-content/uploads/image-306.png)
What’s it for: Effortlessly create professional-looking slides with the Designer feature. Receive instant layout suggestions based on your content, saving time and ensuring your presentation looks polished.
- Select a slide.
- Go to the Design tab and click Designer on the far right along the ribbon.
- Select through ready-made slide designs for instant layouts.
4. Insert 3D Models
![technical presentation tips PowerPoint 3D Models](https://cdn.classpoint.io/wp-content/uploads/image-307.png)
What’s it for: Amp up your presentations with manipulable 3D models, adding a dynamic dimension. Whether it’s showcasing products or visualizing data, 3D models bring your slides to life.
- Click on the “3D Models” dropdown and proceed to Stock 3D Models.
- Search for a 3D model of your choice and insert.
- Manipulate and customize as needed.
5. SmartArt Graphics for Visual Hierarchy
![technical presentation tips PowerPoint SmartArt Graphics](https://cdn.classpoint.io/wp-content/uploads/image-308.png)
What’s it for: Convey complex ideas with visual hierarchy using SmartArt graphics. These graphics offer a structured and visually appealing way to organize information, making your content more digestible.
- Go to the Insert tab.
- Select “SmartArt” and navigate through the available categories.
- Select a graphic template that fits your presentation needs.
- Enter your content and customize as needed.
6. Eyedropper Tool for Color Matching
![technical presentation tips PowerPoint eyedropper](https://cdn.classpoint.io/wp-content/uploads/image-309.png)
What’s it for: Maintain a cohesive design by using the Eyedropper tool to pick colors from images or elements within your presentation. Ensure consistency and professional aesthetics in every slide.
- Select the editable, native PowerPoint object you wish to customize.
- Go to the Shape Format tab and click on the Shape Fill dropdown.
- Select “More Fill Colors…” and click the eyedropper icon to begin color appropriating.
7. Record and Insert Audio
![technical presentation tips PowerPoint record audio](https://cdn.classpoint.io/wp-content/uploads/image-310.png)
What’s it for: Infuse personality into your presentation by recording audio directly within PowerPoint. Ideal for adding voiceovers, explanations, or personal touches that enhance audience engagement.
- Click on “Audio” and choose “Record Audio.”
- Record your audio and insert it into the slide.
8. Presenter Coach for Rehearsing
![technical presentation tips Presenter Coach PowerPoint](https://cdn.classpoint.io/wp-content/uploads/image-311.png)
What’s it for: Elevate your presentation skills with Presenter Coach. Receive valuable feedback on pacing, filler words, and more, refining your delivery for a confident and impactful performance.
- Click on the Slide Show tab.
- Choose “Rehearse with Coach” to start practicing.
9. Hyperlink Navigation for Seamless Transitions
![technical presentation tips PowerPoint hyperlink](https://cdn.classpoint.io/wp-content/uploads/image-312.png)
What’s it for: Streamline your presentation flow by implementing Hyperlink Navigation. This trick allows you to create clickable links within your slides, enabling effortless transitions between related content or external resources, enhancing the overall navigational experience.
- Select the text or object you want to hyperlink.
- Right-click and choose “Hyperlink” or use the Ctrl+K shortcut.
- Specify the destination, whether it’s another slide, a website, or a file, to create a seamless navigational experience.
10. Alt Text for Accessibility
![technical presentation tips PowerPoint Alt Text](https://cdn.classpoint.io/wp-content/uploads/image-313.png)
What’s it for: Improve accessibility by adding descriptive alternative text to images and objects. Ensure inclusivity for visually impaired individuals, making your presentation accessible to a wider audience.
- Right-click on the image or object.
- Choose “Edit Alt Text” and enter a descriptive text.
11. Slide Zoom for Dynamic Navigation
![technical presentation tips PowerPoint Slide Zoom](https://cdn.classpoint.io/wp-content/uploads/image-314.png)
What’s it for: Elevate your presentation’s navigation with Slide Zoom, offering the flexibility to jump to specific slides during a presentation without adhering to a linear sequence. This dynamic feature ensures a more engaging and tailored audience experience.
- Set a master slide where you’d like to put your “mini slides” altogether.
- Navigate to the Insert tab > Zoom dropdown > Slide Zoom.
- Select the slides you want to link onto your master slide and insert.
12. Live Captions and Subtitles
![technical presentation tips PowerPoint Live Captions and Subtitles](https://cdn.classpoint.io/wp-content/uploads/image-315.png)
What’s it for: Foster inclusivity by enabling live captions and subtitles in multiple languages. This feature enhances accessibility, making your presentation more engaging and comprehensible for a diverse global audience.
- Go to the Slide Show tab.
- Select “Always Use Subtitles” and choose your language.
13. Password Protection for Security
![technical presentation tips PowerPoint Password](https://cdn.classpoint.io/wp-content/uploads/Screenshot-2024-01-19-at-4.45.40-PM.png)
What’s it for: Safeguard your presentation’s sensitive content by adding a password. This security measure ensures that only authorized individuals can access and view the information, adding an extra layer of protection.
- Navigate to the File tab.
- Select “Info” and click on “Protect Presentation.”
- Choose “Encrypt with Password” and set your password.
14. Animation Painter for Consistent Animations
![technical presentation tips PowerPoint animation painter](https://cdn.classpoint.io/wp-content/uploads/image-316.png)
What’s it for: Maintain a polished and consistent look throughout your presentation by using the Animation Painter. Copy and apply animations across different objects with ease, ensuring a cohesive visual experience.
- Select the object with the same, desired animation as the others.
- Go to the Animation tab.
- Click on “Animation Painter” and apply to other objects.
15. Linked Excel Charts for Real-Time Updates
![technical presentation tips Link Excel charts with PowerPoint](https://cdn.classpoint.io/wp-content/uploads/image-317.png)
What’s it for: Integrate linked Excel charts for real-time updates in your PowerPoint presentation. Any modifications made to the linked Excel file automatically reflect in your slides, ensuring data accuracy.
- Copy your Excel chart.
- In PowerPoint, use “Paste Special” and choose “Microsoft Excel Worksheet Object.”
16. Custom Slide Sizes
![technical presentation tips PowerPoint custom slide sizes](https://cdn.classpoint.io/wp-content/uploads/image-318.png)
What’s it for: Tailor your presentation to various screen dimensions by customizing slide sizes. This feature, accessible through the Design tab, ensures your content fits seamlessly across different display settings.
- Navigate to the Design tab.
- Click on the “Slide Size” dropdown and choose “Page Setup”.
- Change “Slide sized for” to Custom.
17. Grid and Guidelines for Precision
![technical presentation tips PowerPoint grids and guidelines](https://cdn.classpoint.io/wp-content/uploads/image-319.png)
What’s it for: Achieve precise object alignment with gridlines and guides. This feature, essential for creating visually polished and organized presentations, ensures your content is visually appealing and professionally structured.
- Go to the View tab.
- Check the “Grids” and “Guidelines” toggles for display options and customization.
18. Slide Master for Consistent Design
![technical presentation tips PowerPoint Slide Master](https://cdn.classpoint.io/wp-content/uploads/image-320.png)
What’s it for: Establish a cohesive presentation design by utilizing the Slide Master. This time-saving feature enables you to set consistent layouts, fonts, and colors throughout your presentation.
- Click on “Slide Master” to access and customize master slides.
19. Quick Access Toolbar Customization
![technical presentation tips PowerPoint quick access to toolbar](https://cdn.classpoint.io/wp-content/uploads/image-321.png)
What’s it for: Streamline your workflow by personalizing the Quick Access Toolbar with your most-used commands. This customization ensures quick access to essential tools, enhancing efficiency during presentation creation.
- Click on the dropdown arrow on the Quick Access Toolbar.
- Select “More Commands” to customize your toolbar.
20. Ink Annotations for Handwriting
![technical presentation tips PowerPoint ink annotations](https://cdn.classpoint.io/wp-content/uploads/image-322.png)
What’s it for: Personalize your presentations with a touch-enabled device using ink annotations. This feature allows you to draw or write directly on slides, adding a unique and handwritten touch to your content.
- Go to the Draw tab and click on Draw to begin drawing.
- Choose “Ink to Text” or “Ink to Shape” for handwriting annotations.
21. Crop to Shape for Image Customization
![technical presentation tips PowerPoint Customise Crop Shapes](https://cdn.classpoint.io/wp-content/uploads/image-323.png)
What’s it for: Unleash your creativity by utilizing the Crop to Shape feature, allowing you to create custom image shapes. This adds a distinctive flair to your presentation, providing a visually dynamic and engaging experience.
- Select the image.
- Navigate to the Picture Format tab.
- Click on “Crop” and choose “Crop to Shape.”
- Select the shape you want your image to have as frame.
22. Slide Show Recording with Narration
![technical presentation tips PowerPoint slide show recording with narration](https://cdn.classpoint.io/wp-content/uploads/image-324.png)
What’s it for: Capture your entire presentation, including narration and animations, by recording a self-running slideshow. This feature is invaluable for sharing presentations with a wider audience, ensuring a consistent and engaging delivery.
- Click on “Record Slide Show” and choose recording options.
23. Dynamic Color Scheme Switch for Vibrant Slides
![technical presentation tips PowerPoint color scheme](https://cdn.classpoint.io/wp-content/uploads/image-325.png)
What’s it for: Infuse energy into your presentation by dynamically switching color schemes. This handy trick allows you to quickly experiment with various color palettes, giving your slides a vibrant and fresh appearance in just a few clicks.
- Explore different color options by selecting “Colors” and experimenting with the available palettes. Instantly transform the look of your presentation to match your desired mood and style.
24. Smart Alignment and Distribution for Pixel-Perfect Precision
![technical presentation tips PowerPoint smart alignment of shapes](https://cdn.classpoint.io/wp-content/uploads/image-326.png)
What’s it for: Attain pixel-perfect precision in your presentation design with the Smart Alignment and Distribution trick. This technique allows you to not only align objects with accuracy but also evenly distribute them horizontally, ensuring a polished and visually appealing layout.
- Select the objects you want to align.
- Navigate to the Format tab.
- Click on “Align” to access options like Align Left, Center, or Right for precise alignment.
- Further refine your layout by choosing “Distribute Horizontally,” ensuring equal spacing between objects and achieving a professional design.
25. Insert Online Videos
![technical presentation tips PowerPoint insert online videos](https://cdn.classpoint.io/wp-content/uploads/image-327.png)
What’s it for: Seamlessly integrate online videos directly into your presentation. This feature eliminates the need for external players, offering a smooth and immersive viewing experience for your audience.
- Click on the “Video” dropdown and select Online Movie.
- Paste the video link and your video should be embedded onto your PowerPoint slide.
26. Embed Fonts for Portability
![technical presentation tips PowerPoint embed fonts](https://cdn.classpoint.io/wp-content/uploads/image-328.png)
What’s it for: Ensure consistent visual appeal on any device by embedding fonts in your presentation. This is particularly useful when sharing your work with others who may not have the same fonts installed, enhancing portability.
- Go to the File tab.
- Select “Options” and go to the Save tab from the window popup.
- Check “Embed fonts in the file” as well as “Embed all characters”.
27. Text Transformation
![technical presentation tips PowerPoint text transformation](https://cdn.classpoint.io/wp-content/uploads/image-329.png)
What’s it for: Uncover the elegance of text transformation with the Shape Format trick. This hack allows you to access a myriad of text transformation designs, offering a swift and sophisticated way to elevate the visual appeal of your presentation.
- Select the text you want to transform.
- Navigate to the Shape Format tab.
- Click on “Text Effects” and explore the “Transform” options for a variety of stylish text designs. Instantly apply a transformation that suits the tone and style of your presentation.
5 Critical Best Practices to Implement These Pro PowerPoint Tips and Tricks for a Technically Proficient Presentation
Enhance the technical brilliance of your presentation by focusing on these crucial best practices:
1. Streamlined Font Selection
- Practice: Limit your font styles to a maximum of three per slide.
- Why: Simplifying fonts enhances readability, maintains visual consistency, and prevents distraction, ensuring your message is clear and impactful.
2. High-Resolution Images
- Practice: Source HD images from reputable free resource websites like Freepik or Unsplash .
- Why: High-resolution images prevent pixelation, ensuring clarity and professionalism. Crisp visuals contribute to a visually appealing presentation.
3. Cohesive Color Palette
- Practice: Stick to a consistent color palette throughout your slides; use the eyedropper tool for precise color matching.
- Why: A unified color scheme enhances visual harmony, reinforces brand identity, and elevates the overall aesthetics of your presentation.
4. Efficient Data Visualization
- Practice: Use charts and graphs for data-driven slides, choosing appropriate chart types for different data sets.
- Why: Visualizing data through charts improves comprehension, making complex information more accessible and engaging for your audience.
5. Transitions with Purpose
- Practice: Apply slide transitions judiciously. Choose transitions that complement the content and avoid excessive animations.
- Why: Subtle transitions maintain audience focus, while excessive animations may distract from the core message.
Final Thoughts
In presentation-making, technical practices harmonized with thoughtful design is the key to delivering an impactful message. Whether it may be as simple as considering font choices, to incorporating high-resolution visuals, you do not only get to enhance the aesthetics but also ensure your audience’s undivided attention.
Remember, a technically proficient presentation is not just a showcase of information, but also one that leaves a rather immersive experience for those who will see. But at the end of the day, it comes down to your delivery. So, no sweat! You’re doing amazing, rockstar!
Find them useful? Save them, or share these PowerPoint tips and tricks with others to make their day!
About Ausbert Generoso
Try classpoint for free.
All-in-one teaching and student engagement in PowerPoint.
Supercharge your PowerPoint. Start today.
800,000+ people like you use ClassPoint to boost student engagement in PowerPoint presentations.
![technical presentation tips Cart](https://hbr.org/resources/css/images/cart-icon.png)
- SUGGESTED TOPICS
- The Magazine
- Newsletters
- Managing Yourself
- Managing Teams
- Work-life Balance
- The Big Idea
- Data & Visuals
- Reading Lists
- Case Selections
- HBR Learning
- Topic Feeds
- Account Settings
- Email Preferences
How to Give a Killer Presentation
- Chris Anderson
![technical presentation tips technical presentation tips](https://hbr.org/resources/images/article_assets/2013/06/Feb22_15_758282249.jpg)
For more than 30 years, the TED conference series has presented enlightening talks that people enjoy watching. In this article, Anderson, TED’s curator, shares five keys to great presentations:
- Frame your story (figure out where to start and where to end).
- Plan your delivery (decide whether to memorize your speech word for word or develop bullet points and then rehearse it—over and over).
- Work on stage presence (but remember that your story matters more than how you stand or whether you’re visibly nervous).
- Plan the multimedia (whatever you do, don’t read from PowerPoint slides).
- Put it together (play to your strengths and be authentic).
According to Anderson, presentations rise or fall on the quality of the idea, the narrative, and the passion of the speaker. It’s about substance—not style. In fact, it’s fairly easy to “coach out” the problems in a talk, but there’s no way to “coach in” the basic story—the presenter has to have the raw material. So if your thinking is not there yet, he advises, decline that invitation to speak. Instead, keep working until you have an idea that’s worth sharing.
Lessons from TED
A little more than a year ago, on a trip to Nairobi, Kenya, some colleagues and I met a 12-year-old Masai boy named Richard Turere, who told us a fascinating story. His family raises livestock on the edge of a vast national park, and one of the biggest challenges is protecting the animals from lions—especially at night. Richard had noticed that placing lamps in a field didn’t deter lion attacks, but when he walked the field with a torch, the lions stayed away. From a young age, he’d been interested in electronics, teaching himself by, for example, taking apart his parents’ radio. He used that experience to devise a system of lights that would turn on and off in sequence—using solar panels, a car battery, and a motorcycle indicator box—and thereby create a sense of movement that he hoped would scare off the lions. He installed the lights, and the lions stopped attacking. Soon villages elsewhere in Kenya began installing Richard’s “lion lights.”
- CA Chris Anderson is the curator of TED.
![technical presentation tips technical presentation tips](https://hbr.org/resources/css/images/hmm/HBR-learning-icon.png)
Partner Center
![technical presentation tips James Montemagno](https://montemagno.com/assets/img/logo_circle_alt.png?v=0a7a42779d)
Live, Love, Bike, and Code.
- Newsletter & Feed
![technical presentation tips James Montemagno](https://montemagno.com/content/images/size/w160/2023/02/IMG_5910.jpg)
James Montemagno
Live, Love, Bike, and Code
Copyright © James Montemagno 2024 • All rights reserved. Privacy Policy
Proudly published with Ghost . Branding and design by Cinder Design Co.
- October 28th, 2015
How To Deliver a Great Technical Presentation
Two years ago marked a major shift in my career as a software developer; I transitioned from a full time mobile C#/.NET developer to a full time developer evangelist at Xamarin. Sure, I had attended a few developer conferences in my days, but I had actually never delivered a technical presentation, which may come to a surprise to some. In the past two years I have learned a lot delivering nearly 200 technical presentations, webinars, and workshops. There are a few things for sure is that I have learned a TON on how to deliver a technical presentation and have had a blast having the opportunity to talk to so many amazing developers across the world. I wanted to take a step back for a minute from the mass amount of code that I am often sharing on my blog and write up a few tips and tricks that helped me and hopefully can help you before getting on stage and presenting in front of ten, fifty, one hundred, or thousands of developers.
![technical presentation tips](https://montemagno.com/content/images/2017/07/mepresenting.jpg)
![](http://help4study.online/777/templates/cheerup1/res/banner1.gif)
Prepare that IDE
I can not stress enough how important it is to properly configure your IDE of choice for “Presentation Mode”. On a day to day basis as a developer we have our IDE environment completely customized to our liking and have code spread out between multiple monitors and know every magical keystroke. The problem here is if your audience can’t read or see what you are doing they aren’t going to take anything away from your talk. Here are a few things to get the IDE setup properly.
Stop Using Dark Themes!
I know, I know! You are probably thinking that James has no idea what he is talking about and he has lost his mind saying to use the Light/Blue/Default theme for Visual Studio or Xamarin Studio. Think about it for a second, it is the DEFAULT theme, which means most developers are going to be used to this option of development. Better yet, go stand at the back of the room and attempt to read what you are typing without getting a headache. The Dark Theme of IDEs have a huge contrast between colors and it actually is a strain on your eyes from across the room. Please, please, please stop using the Dark Theme and switch to the default light theme and together we can stop eye strain at conferences.
![technical presentation tips](https://montemagno.com/content/images/2017/07/normaltheme.png)
Use BIG Fonts
This may seem obvious, but text does not always appear bigger when on a projector. Most IDEs default to a 10 or 12pt font, which is nowhere big enough for any attendee to actually read your code. Combine that with the fact that hardly anyone will sit in the front row and the majority of your attendees attempt to sit as far away from you as possible means that you need to crank that font size up. I know it may seem weird at first, but go into your IDE and set your the font to Lucida Console with a minimum of 16pt font . Each projector is a bit different and as of recent I have been presenting with at 24pt font! Best practice here is to take those 10 minutes before your session and open the IDE with some code and walk all the way to the back of the room and see if you can read it. I recommend adjusting the entire IDEs font because scaling each tab in Visual Studio is very painful and you can easily forget during a presentation, so don’t risk it.
![technical presentation tips](https://montemagno.com/content/images/2017/07/bigfonts.png)
Master Zooming
Even though you have adjusted to nice big beautiful fonts it may not be enough some times when you need to highlight and show off your solutions projects or need to highlight something small on the screen. This is where zooming comes in! Learn to master the zoom tools on both Mac and PC and you will surely impress all of your attendees. On Mac OSX, it couldn’t be easier to setup, just go into Accessibility, Zoom, and turn on zooming with a Command + 2 finger swipe in and out. Practice this though so it is a small, slow, and steady zoom so it isn’t jarring for your attendees.
![technical presentation tips](https://montemagno.com/content/images/2017/07/maczoom.png)
On Windows there are some Magnifier tools built in, but I personally like the ZoomIt tool from SysInternals . With a Control+1 you can zoom in to a specified area and even draw on the screen! So cool!
![technical presentation tips](https://montemagno.com/content/images/2017/07/zoomit.png)
Turn off those plugins
I am sorry to say, but all of those fancy IDE plugins such as CodeRush and Resharper that you use on a daily basis should really be turned off. Attempt to get your IDE back to as close to a clean install as possible as you don’t want these tools to be distracting and often they can actually hide what you are trying to show by being too clever. Additionally, I never like to show off additional software that needs to be purchased to make my demo look fancy. If it is in the box then show it off else turn it off.
Get your Machine Ready
As you can see I have put some serious consideration into the optimal IDE settings for presenting and now I don’t even adjust my IDE back to how I used to code. I like to make the joke that I code at 20 pt font, and it is true plus I think it is a bit easier on my eyes. How about the actual machine and operating system itself though? There are plenty of small tweaks that can really ensure that nothing unexpected happens during your presentation and that your demo has the full machines resources needed.
Turn off Notifications
There is nothing worse than an email or twitter notification popping up during a presentation! We have all seen it happen as it is easy to forget to hit that little switch in Mac or Windows to disable all notifications. Usually when screen mirroring this is done for you, but why risk it? Simply turn everything off. On Mac OSX simply hit that odd little trip line on the very very top right of your screen. This will bring out your notification center with a hidden setting you can get to by scrolling/pulling down to put your machine in Do Not Disturb mode (similar to the iPhone).
![technical presentation tips](https://montemagno.com/content/images/2017/07/turnoffnotifications.png)
On Windows 10 simply tap on the notification icon and disable all notifications.
Disable and close apps
This also sounds silly, but there is nothing worse that having Slack keep bouncing up and down because someone mentioned you in a random channel. Don’t risk any unexpected popups and just close EVERYTHING you don’t need. In addition to less clutter on your machine it also will free up resources on your machine. If it isn’t part of your demo then close it out. This is very important for resource intensive programs such as Google Drive, Dropbox, and others.
Auto Hide The Dock on OSX
Get rid of it! It is using up precious screen space!
![technical presentation tips](https://montemagno.com/content/images/2017/07/autohidedock.png)
Acquire the Right Equipment
You have to have the right tools for the job and presenting is no different. The most essential tool for presenting is a presentation pointer/clicker. If I ever forget mine at home I am completely lost without that button to progress to the next slide. My favorite is the well built, light weight, long battery, and very lovely Logitech Wireless Presenter R400 . Buy it and thank me later.
Of course you should also make sure you have all of the cables and devices necessary for giving a technical presentation. You can’t always rely on emulators for everything and may need to do some screen mirroring, so be sure to read my guide on how to properly screen mirror iOS, Android, and Windows . There are of course lots of other things that you may want to think about bringing with you such as a small wireless router, HDMI cable, usb hub, usb cables(Amazon Basics are perfect for this), power adapters , and of course a pad and paper to jot down notes of your presentation.
Oh! Don’t forget a bottle of water before you present. This is one of your most powerful tools that you have in your toolbox. It allows you to stop for 10 seconds, relax, take a sip of water, and carry on because you are crushing it!
Adapters, adapters, adapters!
Buy and carry every single HDMI, VGA, DVI, and Ethernet adapter you possibly can think of. You have no idea what kind of situation you are getting yourself into at a conference and you can’t rely on the organizers to have every little adapter. If you are on a Mac buy official adapters on Amazon , for Surface tablets buy the Microsoft stuff , and of course just get anything else that you can think of . Including a Displayport to HDMI… even if your Mac or PC has a HDMI. It sounds crazy, but trust me you may in fact might only complete the HDCP handshake this way!
![technical presentation tips](https://montemagno.com/content/images/2017/07/adapters.png)
Practice, practice, and practice some more!
I can’t stress it enough that it is really really important to practice your slides and of course your demo even if you have presented it in the past. I have a private GitHub repo that is “demo ready” that allows me to revert changes to for any presentation, but things can still go wrong. New updates, new operating systems, small changes in a NuGet package, who knows! Always run, compile, and download every bit that you need and run through your demo at least the night before just to be sure.
Know your slides
Do you know that little box on the bottom of each slide that says “Presenter Notes”? Do you know what they are for??? Presenter Notes! Don’t try to be all fancy and step out in front of your screen and try to Steve Jobs a presentation unless you have your slides memorized to perfection (I have only done this a few times, and it is not easy). Feel free to move, but put your laptop showing a few small notes and the next slide in between you and your attendees and you will be happy you did.
![technical presentation tips](https://montemagno.com/content/images/2017/07/slides.png)
To live code or not to live code?
This is a question that I ask myself going into every presentation I submit. How much actual live coding do I want to do on stage… aka how much risk do I want to put myself into that something could go wrong. To be honest every presentation will be drastically different and it is OKAY to not write a single line of code. Most people will not take away what you tried to type up. My recommendation is use either small snippets or uncomment code for anything too complex and explain it line by line. I honestly do not see any real difference if you actually typed it out for something overly complex. If it is a very very important concept such as XAML or designing a page and showing off a cool feature then my thought here is absolutely go for live coding and people will appreciate it. My one recommendation is to absolutely NOT do a full presentation of just live coding, it is too much to handle. If you want to show code in slides do it side by side what the feature does with a screenshot. Your attendees will appreciate the effort you put into the sample you built and love that they can download it after.
Prepare for the Unexpected
Sometimes you can’t prepare for anything. Just a few weeks ago I was at a Xamarin Dev Days event in Boston where I was showing off a small weather application using openweathermap.org’s awesome API. Little did I know that a day or two earlier they changed their “open” API to require an API key! All of my demos failed completely and it caught me off guard. I stopped thought and adjusted the demo to just hardcode fake return data to show off what “would” have happened.
Get ready for bad Networks
I can not lie that I am spoiled at home with Cascade Link offering me up a 1GB data connection up and down in Seattle. I can literally download Xamarin faster then it can install on my machines. This is not the case at conventions, hotels, airports, and of course airplanes! Be sure to download and install every bit you need ahead of time. The day of your presentation be sure to connect all your devices and test that connection. If things are going absolutely horrible and there is no internet make sure you have some sort of hotspot or hotspot enabled plan to tether that sweet sweet data. For really complicated demos be sure to also have an offline demo ready.
Here are the two issues I talked about above in the very famous iPhone 4 demo fails by Steve Jobs:
Notice Steve had a hard time and at some point you have to just carry on with the demo, and that is okay. If you can fix it for future demos then go ahead and do that and joke a bit about it. Just don’t ever say that it was the “demo gods” that weren’t with you, just say “well I’m not sure why this isn’t working” and continue on to the next demo. At most give a demo 60 seconds.
Be cognizant of time
Seems silly I know, but time yourself and know how long your presentation will go. Will you have time for questions during or after your sessions? If not tell the audience and don’t stop to answer questions, simply say you will be available after. I have recently started to put turn on a count up timer on my phone so I can glance down to check my time. I highly highly recommend this.
![technical presentation tips](https://montemagno.com/content/images/2017/07/time.png)
Be the expert
People packed the room to hear YOU speak. Be the expert that made you submit the talk in the first place. There will always be someone in the audience that knows something you don’t, but for the vast majority you are the expert so be confident in yourself. I know I am asking a lot here, but just do what you know and if you don’t know something when you are asked a tricky question don’t try to fake an answer, simply say “I am not sure, but let’s have a talk after and I will find out or find someone that does”. Honesty goes a long long way.
One last thing here when it comes to being an expert. Do not in any case ever ask or point out to someone in the audience for an answer. Just because you see an expert doesn’t mean they will know the answer or are following along super close. They are there to learn and all of the attention should be focused on you, not a random person in the audience.
You are your own worst critic
Whoa! You just gave a presentation! Stop and first congratulate yourself as you did something that most people will never do in their life. You got up in front of a room of random people or maybe even your peers and talked for 40 to 60 minutes on a topic. That is pretty amazing so be HAPPY! Stick around and answer questions, be nice, and hand out business cards. Don’t worry about mistakes, an odd wording, or that you think you did “bad”, trust me you didn’t. You will always nit pick your presentation and think you did worse than you actually did. Most likely no one noticed that 10 seconds of silence or small typo in your slide that freaked you out, trust me you most likely crushed it.
You have to have fun when presenting, crack some jokes, engage the audience and have a blast even if something does go wrong. Every presentation will not be perfect but each is a learning opportunity for the next one.
There you have it. This is a lot of text to read, but I am sure glad you did. I am in no way perfect and I am always looking to improve my presentation skills, so if you have your own tips and tricks please share them in the comments below.
Copyright © James Montemagno 2015 • All rights reserved. Privacy Policy
![technical presentation tips technical presentation tips](https://montemagno.com/content/images/2021/05/doge.png)
We use essential cookies to make Venngage work. By clicking “Accept All Cookies”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Manage Cookies
Cookies and similar technologies collect certain information about how you’re using our website. Some of them are essential, and without them you wouldn’t be able to use Venngage. But others are optional, and you get to choose whether we use them or not.
Strictly Necessary Cookies
These cookies are always on, as they’re essential for making Venngage work, and making it safe. Without these cookies, services you’ve asked for can’t be provided.
Show cookie providers
- Google Login
Functionality Cookies
These cookies help us provide enhanced functionality and personalisation, and remember your settings. They may be set by us or by third party providers.
Performance Cookies
These cookies help us analyze how many people are using Venngage, where they come from and how they're using it. If you opt out of these cookies, we can’t get feedback to make Venngage better for you and all our users.
- Google Analytics
Targeting Cookies
These cookies are set by our advertising partners to track your activity and show you relevant Venngage ads on other sites as you browse the internet.
- Google Tag Manager
- Infographics
- Daily Infographics
- Popular Templates
- Accessibility
- Graphic Design
- Graphs and Charts
- Data Visualization
- Human Resources
- Beginner Guides
Blog Beginner Guides How To Make a Good Presentation [A Complete Guide]
How To Make a Good Presentation [A Complete Guide]
Written by: Krystle Wong Jul 20, 2023
![technical presentation tips How to make a good presentation](https://venngage-wordpress.s3.amazonaws.com/uploads/2023/07/How_To_Make_a_Good_Presentation_Blog_Header.png)
A top-notch presentation possesses the power to drive action. From winning stakeholders over and conveying a powerful message to securing funding — your secret weapon lies within the realm of creating an effective presentation .
Being an excellent presenter isn’t confined to the boardroom. Whether you’re delivering a presentation at work, pursuing an academic career, involved in a non-profit organization or even a student, nailing the presentation game is a game-changer.
In this article, I’ll cover the top qualities of compelling presentations and walk you through a step-by-step guide on how to give a good presentation. Here’s a little tip to kick things off: for a headstart, check out Venngage’s collection of free presentation templates . They are fully customizable, and the best part is you don’t need professional design skills to make them shine!
These valuable presentation tips cater to individuals from diverse professional backgrounds, encompassing business professionals, sales and marketing teams, educators, trainers, students, researchers, non-profit organizations, public speakers and presenters.
No matter your field or role, these tips for presenting will equip you with the skills to deliver effective presentations that leave a lasting impression on any audience.
Click to jump ahead:
What are the 10 qualities of a good presentation?
Step-by-step guide on how to prepare an effective presentation, 9 effective techniques to deliver a memorable presentation, faqs on making a good presentation, how to create a presentation with venngage in 5 steps.
When it comes to giving an engaging presentation that leaves a lasting impression, it’s not just about the content — it’s also about how you deliver it. Wondering what makes a good presentation? Well, the best presentations I’ve seen consistently exhibit these 10 qualities:
1. Clear structure
No one likes to get lost in a maze of information. Organize your thoughts into a logical flow, complete with an introduction, main points and a solid conclusion. A structured presentation helps your audience follow along effortlessly, leaving them with a sense of satisfaction at the end.
Regardless of your presentation style , a quality presentation starts with a clear roadmap. Browse through Venngage’s template library and select a presentation template that aligns with your content and presentation goals. Here’s a good presentation example template with a logical layout that includes sections for the introduction, main points, supporting information and a conclusion:
![technical presentation tips technical presentation tips](https://venngage-wordpress.s3.amazonaws.com/uploads/2023/07/image-62-767x1024.png)
2. Engaging opening
Hook your audience right from the start with an attention-grabbing statement, a fascinating question or maybe even a captivating anecdote. Set the stage for a killer presentation!
The opening moments of your presentation hold immense power – check out these 15 ways to start a presentation to set the stage and captivate your audience.
3. Relevant content
Make sure your content aligns with their interests and needs. Your audience is there for a reason, and that’s to get valuable insights. Avoid fluff and get straight to the point, your audience will be genuinely excited.
4. Effective visual aids
Picture this: a slide with walls of text and tiny charts, yawn! Visual aids should be just that—aiding your presentation. Opt for clear and visually appealing slides, engaging images and informative charts that add value and help reinforce your message.
With Venngage, visualizing data takes no effort at all. You can import data from CSV or Google Sheets seamlessly and create stunning charts, graphs and icon stories effortlessly to showcase your data in a captivating and impactful way.
![technical presentation tips technical presentation tips](https://venngage-wordpress.s3.amazonaws.com/uploads/2023/07/image-63-814x1024.png)
5. Clear and concise communication
Keep your language simple, and avoid jargon or complicated terms. Communicate your ideas clearly, so your audience can easily grasp and retain the information being conveyed. This can prevent confusion and enhance the overall effectiveness of the message.
6. Engaging delivery
Spice up your presentation with a sprinkle of enthusiasm! Maintain eye contact, use expressive gestures and vary your tone of voice to keep your audience glued to the edge of their seats. A touch of charisma goes a long way!
7. Interaction and audience engagement
Turn your presentation into an interactive experience — encourage questions, foster discussions and maybe even throw in a fun activity. Engaged audiences are more likely to remember and embrace your message.
Transform your slides into an interactive presentation with Venngage’s dynamic features like pop-ups, clickable icons and animated elements. Engage your audience with interactive content that lets them explore and interact with your presentation for a truly immersive experience.
![technical presentation tips technical presentation tips](https://venngage-wordpress.s3.amazonaws.com/uploads/2023/07/image-64-648x1024.png)
8. Effective storytelling
Who doesn’t love a good story? Weaving relevant anecdotes, case studies or even a personal story into your presentation can captivate your audience and create a lasting impact. Stories build connections and make your message memorable.
A great presentation background is also essential as it sets the tone, creates visual interest and reinforces your message. Enhance the overall aesthetics of your presentation with these 15 presentation background examples and captivate your audience’s attention.
9. Well-timed pacing
Pace your presentation thoughtfully with well-designed presentation slides, neither rushing through nor dragging it out. Respect your audience’s time and ensure you cover all the essential points without losing their interest.
10. Strong conclusion
Last impressions linger! Summarize your main points and leave your audience with a clear takeaway. End your presentation with a bang , a call to action or an inspiring thought that resonates long after the conclusion.
In-person presentations aside, acing a virtual presentation is of paramount importance in today’s digital world. Check out this guide to learn how you can adapt your in-person presentations into virtual presentations .
![technical presentation tips Peloton Pitch Deck - Conclusion](https://venngage-wordpress.s3.amazonaws.com/uploads/2023/07/69ea63d9-bbd7-4977-986f-93ddc3f128fc-1024x576.png)
Preparing an effective presentation starts with laying a strong foundation that goes beyond just creating slides and notes. One of the quickest and best ways to make a presentation would be with the help of a good presentation software .
Otherwise, let me walk you to how to prepare for a presentation step by step and unlock the secrets of crafting a professional presentation that sets you apart.
1. Understand the audience and their needs
Before you dive into preparing your masterpiece, take a moment to get to know your target audience. Tailor your presentation to meet their needs and expectations , and you’ll have them hooked from the start!
2. Conduct thorough research on the topic
Time to hit the books (or the internet)! Don’t skimp on the research with your presentation materials — dive deep into the subject matter and gather valuable insights . The more you know, the more confident you’ll feel in delivering your presentation.
3. Organize the content with a clear structure
No one wants to stumble through a chaotic mess of information. Outline your presentation with a clear and logical flow. Start with a captivating introduction, follow up with main points that build on each other and wrap it up with a powerful conclusion that leaves a lasting impression.
Delivering an effective business presentation hinges on captivating your audience, and Venngage’s professionally designed business presentation templates are tailor-made for this purpose. With thoughtfully structured layouts, these templates enhance your message’s clarity and coherence, ensuring a memorable and engaging experience for your audience members.
Don’t want to build your presentation layout from scratch? pick from these 5 foolproof presentation layout ideas that won’t go wrong.
![technical presentation tips technical presentation tips](https://venngage-wordpress.s3.amazonaws.com/uploads/2023/07/image-65-646x1024.png)
4. Develop visually appealing and supportive visual aids
Spice up your presentation with eye-catching visuals! Create slides that complement your message, not overshadow it. Remember, a picture is worth a thousand words, but that doesn’t mean you need to overload your slides with text.
Well-chosen designs create a cohesive and professional look, capturing your audience’s attention and enhancing the overall effectiveness of your message. Here’s a list of carefully curated PowerPoint presentation templates and great background graphics that will significantly influence the visual appeal and engagement of your presentation.
5. Practice, practice and practice
Practice makes perfect — rehearse your presentation and arrive early to your presentation to help overcome stage fright. Familiarity with your material will boost your presentation skills and help you handle curveballs with ease.
6. Seek feedback and make necessary adjustments
Don’t be afraid to ask for help and seek feedback from friends and colleagues. Constructive criticism can help you identify blind spots and fine-tune your presentation to perfection.
With Venngage’s real-time collaboration feature , receiving feedback and editing your presentation is a seamless process. Group members can access and work on the presentation simultaneously and edit content side by side in real-time. Changes will be reflected immediately to the entire team, promoting seamless teamwork.
![technical presentation tips Venngage Real Time Collaboration](https://venngage-wordpress.s3.amazonaws.com/uploads/2023/07/image-66.png)
7. Prepare for potential technical or logistical issues
Prepare for the unexpected by checking your equipment, internet connection and any other potential hiccups. If you’re worried that you’ll miss out on any important points, you could always have note cards prepared. Remember to remain focused and rehearse potential answers to anticipated questions.
8. Fine-tune and polish your presentation
As the big day approaches, give your presentation one last shine. Review your talking points, practice how to present a presentation and make any final tweaks. Deep breaths — you’re on the brink of delivering a successful presentation!
In competitive environments, persuasive presentations set individuals and organizations apart. To brush up on your presentation skills, read these guides on how to make a persuasive presentation and tips to presenting effectively .
![technical presentation tips technical presentation tips](https://venngage-wordpress.s3.amazonaws.com/uploads/2023/07/image-69-814x1024.png)
Whether you’re an experienced presenter or a novice, the right techniques will let your presentation skills soar to new heights!
From public speaking hacks to interactive elements and storytelling prowess, these 9 effective presentation techniques will empower you to leave a lasting impression on your audience and make your presentations unforgettable.
1. Confidence and positive body language
Positive body language instantly captivates your audience, making them believe in your message as much as you do. Strengthen your stage presence and own that stage like it’s your second home! Stand tall, shoulders back and exude confidence.
2. Eye contact with the audience
Break down that invisible barrier and connect with your audience through their eyes. Maintaining eye contact when giving a presentation builds trust and shows that you’re present and engaged with them.
3. Effective use of hand gestures and movement
A little movement goes a long way! Emphasize key points with purposeful gestures and don’t be afraid to walk around the stage. Your energy will be contagious!
4. Utilize storytelling techniques
Weave the magic of storytelling into your presentation. Share relatable anecdotes, inspiring success stories or even personal experiences that tug at the heartstrings of your audience. Adjust your pitch, pace and volume to match the emotions and intensity of the story. Varying your speaking voice adds depth and enhances your stage presence.
![technical presentation tips technical presentation tips](https://venngage-wordpress.s3.amazonaws.com/uploads/2023/07/image-67-814x1024.png)
5. Incorporate multimedia elements
Spice up your presentation with a dash of visual pizzazz! Use slides, images and video clips to add depth and clarity to your message. Just remember, less is more—don’t overwhelm them with information overload.
Turn your presentations into an interactive party! Involve your audience with questions, polls or group activities. When they actively participate, they become invested in your presentation’s success. Bring your design to life with animated elements. Venngage allows you to apply animations to icons, images and text to create dynamic and engaging visual content.
6. Utilize humor strategically
Laughter is the best medicine—and a fantastic presentation enhancer! A well-placed joke or lighthearted moment can break the ice and create a warm atmosphere , making your audience more receptive to your message.
7. Practice active listening and respond to feedback
Be attentive to your audience’s reactions and feedback. If they have questions or concerns, address them with genuine interest and respect. Your responsiveness builds rapport and shows that you genuinely care about their experience.
![technical presentation tips technical presentation tips](https://venngage-wordpress.s3.amazonaws.com/uploads/2023/07/image-72-814x1024.png)
8. Apply the 10-20-30 rule
Apply the 10-20-30 presentation rule and keep it short, sweet and impactful! Stick to ten slides, deliver your presentation within 20 minutes and use a 30-point font to ensure clarity and focus. Less is more, and your audience will thank you for it!
9. Implement the 5-5-5 rule
Simplicity is key. Limit each slide to five bullet points, with only five words per bullet point and allow each slide to remain visible for about five seconds. This rule keeps your presentation concise and prevents information overload.
Simple presentations are more engaging because they are easier to follow. Summarize your presentations and keep them simple with Venngage’s gallery of simple presentation templates and ensure that your message is delivered effectively across your audience.
![technical presentation tips technical presentation tips](https://venngage-wordpress.s3.amazonaws.com/uploads/2023/07/image-68-814x1024.png)
1. How to start a presentation?
To kick off your presentation effectively, begin with an attention-grabbing statement or a powerful quote. Introduce yourself, establish credibility and clearly state the purpose and relevance of your presentation.
2. How to end a presentation?
For a strong conclusion, summarize your talking points and key takeaways. End with a compelling call to action or a thought-provoking question and remember to thank your audience and invite any final questions or interactions.
3. How to make a presentation interactive?
To make your presentation interactive, encourage questions and discussion throughout your talk. Utilize multimedia elements like videos or images and consider including polls, quizzes or group activities to actively involve your audience.
In need of inspiration for your next presentation? I’ve got your back! Pick from these 120+ presentation ideas, topics and examples to get started.
Creating a stunning presentation with Venngage is a breeze with our user-friendly drag-and-drop editor and professionally designed templates for all your communication needs.
Here’s how to make a presentation in just 5 simple steps with the help of Venngage:
Step 1: Sign up for Venngage for free using your email, Gmail or Facebook account or simply log in to access your account.
Step 2: Pick a design from our selection of free presentation templates (they’re all created by our expert in-house designers).
Step 3: Make the template your own by customizing it to fit your content and branding. With Venngage’s intuitive drag-and-drop editor, you can easily modify text, change colors and adjust the layout to create a unique and eye-catching design.
Step 4: Elevate your presentation by incorporating captivating visuals. You can upload your images or choose from Venngage’s vast library of high-quality photos, icons and illustrations.
Step 5: Upgrade to a premium or business account to export your presentation in PDF and print it for in-person presentations or share it digitally for free!
By following these five simple steps, you’ll have a professionally designed and visually engaging presentation ready in no time. With Venngage’s user-friendly platform, your presentation is sure to make a lasting impression. So, let your creativity flow and get ready to shine in your next presentation!
Discover popular designs
![technical presentation tips](https://cdn.venngage.com/landing/img/infographic-maker.webp)
Infographic maker
![technical presentation tips](https://cdn.venngage.com/landing/img/brochure-maker_v2.webp)
Brochure maker
![technical presentation tips](https://cdn.venngage.com/landing/img/white-paper-maker.webp)
White paper online
![technical presentation tips](https://cdn.venngage.com/landing/img/newsletter-maker.webp)
Newsletter creator
![technical presentation tips](https://cdn.venngage.com/landing/img/flyer-maker.webp)
Flyer maker
![technical presentation tips](https://cdn.venngage.com/landing/img/timeline-maker.webp)
Timeline maker
![technical presentation tips](https://cdn.venngage.com/landing/img/letterhead_maker_v2.webp)
Letterhead maker
![technical presentation tips](https://cdn.venngage.com/landing/img/mindmap-maker.webp)
Mind map maker
![technical presentation tips](https://cdn.venngage.com/landing/img/ebook-maker.webp)
Ebook maker
Scott Hanselman
Tips for preparing for a technical presentation.
I felt pretty good about my presentation at PDC last week. They are WAY more uptight about presentations at PDC than at TechEd. You have to go through dry-runs and slide reviews and all sorts of things that I was dodging at every turn.
The talk is available, as are all PDC talks, up at http://sessions.microsoftpdc.com . You can get them in these formats WMV-HQ , WMV , Zune , MP4 which is cool. I like the WMV-HQ version, over the WMV version, because it includes picture-in-picture video. My talk is no fun if you can't see me being silly. You can also watch it streaming in the browser via Silverlight and download my PPTX . If you saw it live, don't forget to evaluate the session as I have to Crush Anders in the scores. (Note to self, register CrushAnders.com and .net)
Anyway, someone was asking how I prepare for a talk, so I figured this would be as good enough time as any for a post on the topic.
![technical presentation tips image](https://hanselmanblogcontent.azureedge.net/WindowsLiveWriter/TipsforPreparingforaTechnicalPresentatio_12E38/image_3.png)
I thought I did a good job, with 72 slides and 8 demos in 75 minutes and only one person said it felt rushed in the comments. ;) Of course, I had about 9 hours of content, but I did prepare in specific ways in order to pull it off.
Know Where Things Are - Beforehand
You can easily waste 2 to 5 minutes over an hour long talk looking for crap. Seriously, I don't need to see how slow you are with Explorer. If you want to have your audience rush the stage, be slow in finding stuff. ;)
Make a folder of links that is specific to your talk. I made one and numbered each link in the order I was going to use them. That includes links to folders, files, browsers, batch files, reset scripts, whatever.
My talk also included a lot of websites that I knew I'd be visiting. I made a Links toolbar in IE and setup links to everything I'd visit, in order.
![technical presentation tips image](https://hanselmanblogcontent.azureedge.net/WindowsLiveWriter/TipsforPreparingforaTechnicalPresentatio_12E38/image_thumb_2.png)
My tiny head is on those links not because of my huge ego, but because those links are inside my domain and IE used my favicon.ico. ;)
"Sync to Paper" and Know Your Timing
I'm a gadget guy, sure, and I've got the same todo.txt file on my desktop that the rest of you do, but there's really something about "syncing to paper." before every talk I write a few things down. I do it on a Moleskine notebook that I wrote about in my Personal Systems of Organization post .
Over the years I've come up with a few techniques on paper that have helped me greatly. Scanned below is the notes I used in my PDC talk.
On the left-hand side you'll see 5 sections, numbered from top to bottom. I make one section per 15 minute segment . This was a 75 minute talk, so there's 5 sections. Sometimes I'll take the FIRST and LAST section and split them into 5/10 and 10/5 respectively. Regardless of how you do it, the point here is to know these things:
- I use the segments to let me know where I'm supposed to be at 15 min, 30 min, etc. Looking at the notes, if I'm on the PLINQ demo and it's only 20 minutes in, I'm going WAY too fast for example.
- It's nice to be free of knowing what's next. The mind can free associate better if it isn't saddled with where it's headed. That's the paper's job. I glance down just to see that I'm on track.
- On the left side I've numbered the demos 1 or 2. The #2's I can drop if I need to save time. The #1's can't be dropped or it'll ruin everything. Have enough demos to fill the time, but also know ahead of time which demos to drop if need be.
![technical presentation tips BabySmash Presentatio nNotes](https://hanselmanblogcontent.azureedge.net/WindowsLiveWriter/TipsforPreparingforaTechnicalPresentatio_12E38/BabySmashPresentationNotes_thumb.jpg)
Know Your Narrative and Where to "Pivot"
If you've ever been unfortunate enough to come upon me freaking out before a talk at a conference, I've likely accosted you and run through the narrative or the "story arc." I keep doing this until it really resonates with me and the half-dozen folks I abuse regularly, like Phil Haack and Rob Conery .
It's all the same basic middle-school speech stuff we've all learned before, but I'm constantly reminding myself of these questions:
- Why is the audience there?
- Who is the audience?
- How can I avoid wasting their time?
- What's the one thing they should get out of the talk?
I also try to focus on a story arc that looks like:
- What is this?
- This is it.
- What was that?
![technical presentation tips The .NET Framework Universe](https://hanselmanblogcontent.azureedge.net/WindowsLiveWriter/TipsforPreparingforaTechnicalPresentatio_12E38/image_6.png)
I call it that because in basketball once you've planted your feet you have to pivot on one foot. You can move all over as long as you keep that one foot planted. If the basketball analogy doesn't work for you, then think of holding your finger on a chess piece while you think of your next move.
For the PDC talk, we had these nice posters to pass out. They look nice as placemats or on the wall, but they look busy on a slide, so I covered them with bright colored shapes. The Core shape was my pivot point. I'd start there, go to Client, then come back to Core. I'd go to Data, then back to Core. Just like that, Rinse, Repeat.
If you've got a meandering talk, like I did, finding a place to keep coming back to can really help. It helps me.
Have a Pre-Talk Checklist and Demo Reset
Make a complete list of everything that you need to do before your talk. If that means find a Diet Coke and use the bathroom, fine, put it on the list. Here's mine for this talk, unedited .
reset the database resize and prep the browser cache the font list remove my son's face from the xaml * Pick up the Samsung SilverLight Phone Test the Phone remote viewing software prep the mac, test the mac's video output (1280) *dvi-vga adapter for the mac check all font sizes in all apps run zoomin shutdown services, and the mesh Warn orcsweb that traffic is coming
I had a bunch of stuff that could have gone wrong if I hadn't checked ahead of time. The Mac I used for the Surface demo only output at 1280x1024. I checked that with the tech guy at 8am. I didn't have a DVI-VGA adapter, so I got one at Radio Shack. I went into every app I was going to run and made sure the fonts were at a visible size (I like Consolas 15pt). I also shutdown all non-essential services. ALL of them. I go from 107 programs running to less than 50. I shutdown piles of stuff in Services.msc like "Infrared Service" and all that crap. I called my ISP, Orcsweb , and warned them I was doing a demo so they'd babysit the box and not think there was an attack.
Preparations like this, and batch files that reset your demos, drop and recreate your database, clear caches, prime caches or whatever administrivia you need, just take a few minutes to do, but they make a presentation look much more professional.
Related Posts
- Personal Systems of Organization
- 11 Top Tips for a Successful Technical Presentation
About Scott
Scott Hanselman is a former professor, former Chief Architect in finance, now speaker, consultant, father, diabetic, and Microsoft employee. He is a failed stand-up comic, a cornrower, and a book author.
![technical presentation tips facebook](https://images.hanselman.com/main/icon-fb.png)
Comments are closed.
Disclaimer: The opinions expressed herein are my own personal opinions and do not represent my employer's view in any way.
How to give a technical presentation (how to give a scientific talk)
By michael ernst, january, 2005 last updated: march 21, 2022, introduction, the content, answering questions, in-class presentations, practice talks, other resources.
(Also see my advice on giving a job talk and on making a technical poster .)
A successful career depends on the ability to give effective technical presentations, whether at a conference, to your research group, or as an invited speaker. This page notes some problems that I very frequently see in talks.
Get feedback by giving multiple practice talks ! One of the most effective ways to improve your work is to see the reactions of others and get their ideas and advice.
Think about the presentations you attend (or have attended in the past), especially if they are similar in some way to yours. What was boring about the other presentations? What was interesting about them? What did you take away from the presentation? What could you have told someone about the topic, 30 minutes after the end of the presentation?
Before you start preparing a talk, you need to know your goal and know your audience. You will have to customize your presentation to its purpose. Even if you have previously created a talk for another venue, you often need to make a new one, particularly if the audience differs or you have done more work in the meanwhile.
The goal of a talk you give to your research group is to get feedback to help you improve your research and your understanding of it, so you should plan for a very interactive style, with lots of questions throughout. In a conference talk , questions during the talk are unlikely, and you have much less time; your chief goal is to get people to read the paper or ask questions afterward. In a seminar or invited talk , you want to encourage questions, you have more time, and you should plan to give more of the big picture.
The goal of a talk is similar to the goal of a technical paper : to change the audience's behavior. Therefore, you should also read and follow my advice about writing a technical paper . Decide what the change is, and focus your talk around that. Typically, you have done some research, and to effect the change you need to convince the audience of 3 things: the problem is worthwhile (it is a real problem, and a solution would be useful), the problem is hard (not already solved, and there are not other ways to achieve equally good results), and that you have solved it. If any of these three pieces is missing, your talk is much less likely to be a success. So be sure to provide motivation for your work, provide background about the problem, and supply sufficient technical details and experimental results.
When you give a talk, ask yourself, “What are the key points that my audience should take away from the talk?” Then, elide everything that does not support those points. If you try to say too much (a tempting mistake), then your main points won't strike home and you will have wasted everyone's time. In particular, do not try to include all the details from a technical paper that describes your work; different levels of detail and a different presentation style are appropriate for each. Never paste PDF of a table from a paper to slides. Reformat the table to be more readable and to remove information that is not essential. The talk audience does not have as much time to comprehend the details as a paper reader does.
Before you create slides, a good way to determine what your talk should say is to explain your ideas verbally to someone who does not already understand them. (You may use a blank whiteboard, but that often is not necessary.) You may need to do this a few times before you find the most effective way to present your material. Notice what points you made and in what order, and organize the talk around that. Slides should not be an obstacle that constrains your talk, but they should support the talk you want to give.
Do not try to fit too much material in a talk. About one slide per minute is a good pace (if lots of your slides are animations that take only moments to present, you may have more slides). Remember what your key points are, and focus on those. The key point should be written on the slide, for example as its title or as a callout. Don't present more information than your audience can grasp; for example, often intuitions and an explanation of the approach are more valuable than the gory details of a proof. If you try to fit the entire technical content of a paper into a talk, you will rush and the audience may come away understanding nothing. It's better to think of the talk as an advertisement for the paper that gives the key ideas, intuitions, and results, and that makes the audience eager to read your paper or to talk with you to learn more. That does not mean holding back important details — merely omitting less important ones. You may also find yourself omitting entire portions of the research that do not directly contribute to the main point you are trying to make in your talk.
Just as there should be no extra slides, there should be no missing slides. As a rule, you shouldn't speak for more than a minute or so without having new information appear. If you have an important point to make, then have a slide to support it. (Very few people can mesmerize an audience on a technical topic, and leave the audience with a deep understanding of the key points, without any visual props. Unfortunately, you are probably not one of them.) As a particularly egregious example, do not discuss a user interface without presenting a picture of it — perhaps multiple ones. As another example, you should not dwell on the title slide for very long, but should present a graphic relevant to the problem you are solving, to make the motivation for your work concrete.
Slide titles. Use descriptive slide titles. Do not use the same title on multiple slides (except perhaps when the slides constitute an animation or build). Choose a descriptive title that helps the audience to appreciate what the specific contribution of this slide is. If you can't figure that out, then you do not yet understand your own material.
Introduction. Start your talk with motivation and examples — and have lots of motivation and examples throughout. For the very beginning of your talk, you need to convince the audience that this talk is worth paying attention to: it is solving an important and comprehensible problem. Your first slide after the title slide should be motivation, such as an example of the problem you are solving.
Outline slides. Never start your talk with an outline slide. (That's boring, and it's too early for the audience to understand the talk structure yet.) Outline slides can be useful, especially in a talk that runs longer than 30 minutes, because they help the audience to regain its bearings and to keep in mind your argument structure. Present an outline slide (with the current section indicated via color, font, and/or an arrow) at the beginning of each major section of the talk, except for the introductory, motivational section.
Conclusion. The last slide should be a contributions or conclusions slide, reminding the audience of the take-home message of the talk. Do not end the talk with future work, or with a slide that says “questions” or “thank you” or “the end” or merely gives your email address. And, leave your contributions slide up after you finish the talk (while you are answering questions). One way to think about this rule is: What do you want to be the last thing that the audience sees (or that it sees while you field questions)?
Builds/animations. When a subsequent slide adds material to a previous one (or in some other way just slightly changes the previous slide), all common elements must remain in exactly the same position, pixel-for-pixel. A good way to check this is to quickly transition back and forth between the two slides several times. If you see any jitter, then correct the slide layout to remove it. You may need to leave extra space on an early slide to accommodate text or figures to be inserted later; even though that space may look a little unnatural, it is better than the alternative. If there is any jitter, the audience will know that something is different, but will be uneasy about exactly what has changed (the human eye is good at detecting the change but only good at localizing changes when those changes are small and the changes are smooth). You want the audience to have confidence that most parts of the slide have not changed, and the only effective way to do that is not to change those parts whatsoever. You should also consider emphasizing (say, with color or highlighting) what has been added on each slide.
Keep slides uncluttered. Don't put too much text (or other material) on a slide. When a new slide goes up, the audience will turn its attention to comprehending that slide. If the audience has to read a lot of text, they will tune you out, probably missing something important. This is one reason the diagrams must be simple and clear, and the text must be telegraphic. As a rule of thumb, 3 lines of text for a bullet point is always too much, and 2 full lines is usually too much. Shorten the text, or break it into pieces (say, subbullet points) so that the audience can skim it without having to ignore you for too long.
Do not read your slides word-for-word. Reading your slides verbatim is very boring and will cause the audience to tune out. You are also guaranteed to go too fast for some audience members and too slow for others, compared to their natural reading speed, thus irritating many people. If you find yourself reading your slides, then there is probably too much text on your slides. The slides should be an outline, not a transcript. That is, your slides should give just the main points, and you can supply more detail verbally. It's fine to use the slides as a crutch to help you remember all the main points and the order in which you want to present them. However, if you need prompting to remember the extra details, then you do not have sufficient command of your material and you need to practice more before giving your talk.
Just as you should not read text verbatim, you should not read diagrams verbatim. When discussing the architecture of a system, don't just read the names of the components or give low-level details about the interfaces between them. Rather, explain whatever is important, interesting, or novel about your decomposition; or discuss how the parts work together to achieve some goal that clients of the system care about; or use other techniques to give high-level understanding of the system rather than merely presenting a mass of low-level details.
(It's possible to overdo the practice of limiting what information appears on each slide, and you do want to have enough material to support you if there are questions or to show that the simplified model you presented verbally is an accurate generalization. But the mistake of including too much information is far more common.)
Text. Keep fonts large and easy to read from the back of the room. If something isn't important enough for your audience to be able to read, then it probably does not belong on your slides.
Use a sans-serif font for your slides. (Serifed fonts are best for reading on paper, but sans-serif fonts are easier to read on a screen.) PowerPoint's “Courier New” font is very light (its strokes are very thin). If you use it, always make it bold, then use color or underlining for emphasis where necessary.
Figures. Make effective use of figures. Avoid a presentation that is just text. Such a presentation misses important opportunities to convey information. It is also is wearying to the audience.
Images and visualizations are extremely helpful to your audience. Include diagrams to show how your system works or is put together. Never include generic images, such as clip art, that don't relate directly to your talk. For example, if you have a slide about security, don't use the image of a padlock. As another example, when describing the problem your work solves, don't use an image of a person sitting at a computer looking frustrated. Just as good pictures and text are better than text alone, text alone is better than text plus bad pictures.
When you include a diagram on a slide, ensure that its background is the same color as that of the slide. For example, if your slides have a black background, then do not paste in a diagram with a white background, which is visually distracting, hard to read, and unattractive. You should invert the diagram so it matches the slide (which may require redrawing the diagram), or invert the slide background (e.g., use a white slide background) to match the diagrams. A light-colored background with dark text is usually the best choice (preferably white background with black text; see the next paragraph about eye candy).
Do not use eye candy such as transition effects, design elements that appear on every slide, or multi-color backgrounds. At best, you will distract the audience from the technical material that you are presenting. At worst, you will alienate the audience by giving them the impression that you are more interested in graphical glitz than in content. Your slides can be attractive and compelling without being fancy. Make sure that each element on the slides contributes to your message; if it does not, then remove it.
Emphasis. Slides that are monocolor black on a white background can be boring. This tires the audience, and it may prevent them from appreciating the big picture. Use color, callouts (e.g., arrows or speech bubbles), or other mechanisms to draw attention to the most important parts of your slides or graphs. For example, suppose you have a list of 3-5 bullet points, each one line of text long. You might want to emphasize the 1-3 most important words in each bullet point.
Color. About 5% of American males are color-blind, so augment color with other emphasis where possible. For example, on an outline slide, in addition to color I use boldface and also a right arrow (⇒) in the left margin to indicate the current section of the talk.
The presentation
Make eye contact with the audience. This draws them in. It also helps you determine when they are confused or have lost interest, and whether your pacing is too fast or too slow.
Stand and face the audience.
- Don't give a talk while seated. Standing gives you more energy, the talk is more dynamic, and it is easier to maintain eye contact.
- Do not face the screen, which puts your back to the audience. This is offputting, prevents you from getting feedback from the audience's body language, and can cause difficulty in hearing/understanding you. Do not look down at your computer, either, which shares many of the same problems.
- Don't stand in front of the screen. This prevents the audience from viewing your slides.
- Being animated is good, but do not pace. Pacing is very distracting, and it gives the impression that you are unprofessional or nervous.
When giving a presentation, never point at your laptop screen, which the audience cannot see. Amazingly, I have seen many people do this! Using a laser pointer is fine, but the laser pointer tends to shake, especially if you are nervous, and can be distracting. I prefer to use my hand, because the talk is more dynamic if I stride to the screen and use my whole arm; the pointing is also harder for the audience to miss. You must touch the screen physically, or come within an inch of it. If you do not touch the screen, most people will just look at the shadow of your finger, which will not be the part of the slide that you are trying to indicate.
If you find yourself suffering a nervous tic, such as saying “um” in the middle of every sentence, then practice more, including in front of audiences whom you do not know well.
If you get flustered, don't panic. One approach is to stop and regroup; taking a drink of water is a good way to cover this, so you should have water on hand even if you don't suffer from dry throat. Another approach is to just skip over that material; the audience is unlikely to know that you skipped something.
Think about your goal in giving the talk. When presenting to your own research group, be sure to leave lots of time for discussion and feedback at the end, and to present the material in a way that invites interaction after and perhaps during the talk. (When presenting to your own group, you can perhaps give a bit less introductory material, though it's hard to go wrong with intro material. It should go quickly for that audience; you ensure that everyone is using terms the same way; and it's always good to practice presenting the motivation, context, background, and big ideas.)
For computer science conferences, the typical dress code is “business casual”. (For men, this is a dress shirt with slacks or jeans.) Some people dress more formally, some more casually. The most important thing is that you are comfortable with your clothing; if you are not, your discomfort will lead to a worse presentation.
Answering questions from the audience is very hard! Even after you become very proficient at giving a talk, it will probably take you quite a bit longer to become good at answering questions. So, don't feel bad if that part does not go perfectly, but do work on improving it.
Just as you practice your talk, practice answering questions — both the ones that you can predict, and also unpredictable ones. Give practice talks to people who are willing to ask such questions.
When an audience member asks a question, it is a good idea to repeat the question, asking the questioner whether you have understood it, before answering the question. This has three benefits.
- You ensure that you have understood the question. When thinking under pressure, it can be far too easy to jump to conclusions, and it is bad to answer a question different than the one that was asked. A related benefit is that you get to frame the question in your own words or from your own viewpoint.
- You give yourself a few moments to think about your answer.
- If the audience member does not have a microphone, the rest of the audience may not have been able to hear the question clearly.
Be willing to answer a question with “no” or “I don't know”. You will get into more trouble if you blather on or you make up an answer on the fly.
For an in-class presentation by a student, you will be judged on how well other people understand the material at the end of the class, not on how well you understand the material at the beginning of the class. (You do need to understand the material, but that is not the main point.)
When you present someone else's paper in class, you should cover not only the technical details (people generally do a good job of this), but also what is novel and why others didn't do it before. That is just as important but very often overlooked. Focus on what is important about the paper, not just on what is easy to explain or to give an example for.
Know what your main point is, and don't get bogged down in easier-to-understand but less interesting details. Try not to bring up a topic until you are ready to discuss it in detail — don't bring it up multiple times.
Encourage questions — it's the best way to deepen understanding — and be able to answer them. If other students wrote questions in a reading summary, be responsive to them. When you ask a question, don't assume the answer in the form of your question. For example, don't ask, “Was there anything novel in the paper, or not?” but “What was novel in the paper?” It can be very effective to ask a question that reveals understanding of a subtle or easy-to-misunderstand point (but an important one!) in the paper, because this will lead the audience members to reflect both on the paper and on the way they read and understood it. Don't be too abstruse, and don't get bogged down in unimportant details just to show your mastery of them.
Examples are often very helpful. Augment your talking with visuals on the board or slides. Either is fine. The board may encourage more interaction (and it slows you down in a beneficial way), but does require pre-planning; don't just go up and start drawing. Most people find comfort in having pre-prepared slides, and slides can be a good choice because they can be more legible and detailed, can include animations, etc. Don't waste a huge amount of time on elaborate slide decks, though; that is not the point.
Always give at least one practice talk before you present in front of an audience. Even if you have read over your slides and think you know how the talk will go, when you speak out loud your ideas are likely to come out in a different way. (This is true about writing , too: even if you know what you want to say, it takes several revisions to figure out the best way to say it.) In fact, you should practice the talk to yourself — speaking out loud in front of a mirror, for example — before you give your first practice talk. In your individual practice session, you must say every word you intend to in the actual talk, not skipping over any parts.
It can be a good idea to keep your practice talk audience relatively small — certainly fewer than 10 people. In a large group, many people won't bother to speak up. If the pool of potential attendees is larger than 10, you can give multiple practice talks, since the best feedback is given by someone who has not seen the talk (or even the material) before. Giving multiple practice talks is essential for high-profile talks such as conference talks and interview talks. Avoid a small audience of people you don't trust, who might be unanimous in a wrong opinion; getting a balance of opinions will help you avoid making too many mistakes in any one direction.
Videotape yourself to see how you come across to others. This information can be a bit traumatic, but it is invaluable in helping you to improve.
When giving a practice talk, number your slides (say, in the corner), even if you don't intend to include slide numbers in your final presentation.
When giving a practice talk, it is very helpful to distribute hardcopy slides (remember to include slide numbers) so that others can easily annotate them and return them to you at the end of the talk. (Also, the audience will spend less time trying to describe what slide their comment applies to, and more time writing the comment and paying attention to you.) For non-practice talks, don't give out hardcopy slides, as they would tempt the audience to pay attention to the piece of paper instead of to you.
Go to other people's practice talks. This is good citizenship, and cultivating these obligations is a good way to ensure that you have an audience at your practice talk. Furthermore, attending others' talks can teach you a lot about good and bad talks — both from observing the speaker and thinking about how the talk can be better (or is already excellent), and from comparing the feedback of audience members to your own opinions and observations. This does not just apply to practice talks: you should continually perform such introspective self-assessment.
(Also see Tessa Lau 's advice on giving a practice talk — which focuses on a practice talk for a PhD qualifying exam, but is relevant to talks in general.)
Here are some other good resources for speakers who wish to give a good talk.
See Ian Parberry's speaker's guide .
The LaTeX Beamer documentation has some good advice.
Back to Advice compiled by Michael Ernst .
How to Deliver a Memorable Technical Presentation
Master the art of technical presentations, whether it's in your project meeting or an industry conference. Unleash your potential with these invaluable tips to ensure your presentation success.
October 26, 2023
![technical presentation tips](https://cdn.prod.website-files.com/622217140a9cad5092ea9b25/65113841e71d376bb00553ee_How_to_Deliver_a_Memorable_Techincal_Presentation%20(1).webp)
What's Inside?
Tips to Ace Your Technical Presentation
![technical presentation tips technical presentation tips](https://cdn.prod.website-files.com/622217140a9cad5092ea9b25/651bdce5e10241fdeb01f7f7_7p.webp)
Let’s say your company launched a SaaS application a few days ago. As head of the team, the onus is on you to spearhead the sales process. And the first step started with drafting a technical presentation explaining the product. Yes, you are a pro who knows all about the technical aspect, and you might be confident too.
But there are several questions you should ponder over
- Who will you be presenting to?
- How well is everyone aware of SaaS products?
- What should be your approach to drive sales and convince people of the product?
The answers to these questions will change the course of your presentation each time because the content will have to be modified accordingly.
Technical presentations are lengthy, specific, and involve complex information/ideas (often dreary and detailed), making them difficult to deliver over non-technical ones. And that’s why they require a different approach, which we have covered in this article.
How to Deliver a Winning Technical Presentation?
Here are some pro tips for creating impeccable slides and leaving your mark.
1. What is the core message and purpose of your presentation?
Structure your presentation around the key goal, which could be anything from sharing information and eliciting feedback to getting funding or a job offer, etc.
Organizing your presentation around a core theme will help your audience identify and follow the central points that support your content.
For instance, if your goal is to present a scientific result, include more information about what the result means and how it can be used rather than focusing on your methodology.
Or if your goal is to elicit response/feedback on some experiment, focus more on the methods, i.e., advantages, disadvantages of different models, your assumptions, how your model is more useful, etc.
Tell your audience what you want them to do. Why should they do it, and how?
2. Who is your audience?
Knowing your people (audience analysis) will help you stick to the right chord.
It will also help you know how much technical jargon you can rely on and whether images and analogies would suit the audience better.
Your audience might be diverse (investors, clients, customers, etc.) with different interests, knowledge bases, goals, and concerns. And, mind you, they are as central to your presentation as you are. So, know as much as you can about them and structure your presentation accordingly. Highlight how your message overlaps with what these people care about, and remember to include the diverse backgrounds and experiences in the introductory part. And you will have everyone’s attention right from the start.
3. Define a clear outline
You can divide the content into three sections for clear structure and easy comprehension. The first section gives an outline/summary of the main topic and illustrates why it was important enough to become the subject.
The second part can elaborate on the main subject with its minute technical details and everything that the audience needs to know.
The third section can highlight the resolution, solution, CTA, and course of action to the problem presented.
An effective presentation is not one where you detail every possible information about the topic or include as many issues as possible. It is when you can get people to build understanding and support for your central message.
4. Take help of everything that can explain the concept
For any presentation, words/text are not enough. And it becomes all the more imperative in a technical presentation slide.
According to a survey, people prefer 1/4th of the slide composed of text at most.
Since you will have to use jargon here and there, you can’t rely just on your speech. Use pre-designed PowerPoint templates comprising graphs, diagrams, animations, videos, infographics, etc., to help people understand technical concepts and information clearly. You can also use other experiential methods like prototypes, handmade models, or real-time experiments.
For a better understanding, go through this video showcasing paper prototyping of a mobile application :
5. Remember to be consistent
When your presentation slides differ in size, display, structure, etc., it can distract or confuse people and make them lose attention. Creating a consistent theme is important to help people focus and keep your presentation aligned.
Take the help of these tips to incorporate consistency in your work-
- Go for colors that complement each other, following the preferred color scheme.
- Choose fonts that are easy to read in a presentation or digital content like Serif or Sans-serif.
- Go for the same layout for a similar kind of content. Use one kind of layout for cover slides, one kind for section introduction, and one for content slides. It will help your audience categorize the content and know where to look for what information.
And, of course, don’t forget how immensely it will help you as a presenter.
And yes, keep your presentation short – not more than 10 slides. You can go for the 10/20/30 rule, i.e., 10 slides, 20 minutes, and 30 font size.
6. Leave space for questions and queries
Since your presentation is technical and the audience might be diverse, be prepared to answer questions. The major cause of anxiety before a presentation is a lack of preparation. Being thorough with the subject matter will also aid you in answering any questions being asked, apart from avoiding presentation jitters.
Allocate a well-designated time to interact with the audience. You can also do that during the course of the presentation if it doesn’t interfere with your speech. It will keep people engaged and alert as they get small windows to pose queries throughout.
7. Practice sessions
You might be confident about your content, but when you speak/deliver, your words and ideas might come out in a different way and not as you intend.
It could so happen that you are not too good with voice modulation or at specifying relevant points. That’s why it is imperative that you have multiple practice talks before delivering the presentation.
Keep your practice audience small and diverse so that you get relevant opinions and everyone has something to share.
You can share hard copies and remember to number your slides as well. It will help people annotate them and return them at the end. You can videotape yourself as well to see how you come across and improve accordingly.
8. A few quick tips
Keep in mind where you want to take your audience through the presentation. What perspective shift do you seek?
Do you want them to invest in the product? Or is it just an internal meeting highlighting the attributes of the product?
WIIFY is an acronym for What’s in It for You. Make sure you present it to your audience. For example, in the case of the SAAS application, your WIIFY to your potential investors would be - Investing in our product will get you an excellent ROI.
Let them know the USP of your proposition and the concept you are presenting. For example, you could highlight your USP as the one place for everything from website development to QA testing.
Use a short statement to capture everyone’s attention. It may be anecdotes, statistics, analogies, aphorisms, a question, etc.
For example, you could start with a statement like - Keep track of how many times I shall say ‘if’ when I explain the success of this product.
Or an analogy like - SAAS is like traveling by train where you have assigned routes and co-ride with other passengers.
Do’s and Dont's
- The presentation should start with the motivation, i.e., why this particular thing needs to be presented.
- Every presentation slide should contain only relevant information and not more than that.
- Titles should be enough on their own (self-explanatory); the rest of the text should be there to support the visuals, comprising relevant graphs, charts, histograms, etc.
- And most importantly, the audience properly understands the message the presenter desires to convey. Also, be mindful of overusing jargon.
In a Nutshell
Be thorough about the topic, learn about your audience, take the help of props and visual aids, and structure your presentation well. Don’t forget to interact with your audience as and when you get the chance. Also, make sure your audience knows what to do with the information you shared, i.e., give them a proper course of action.
Keeping these points in mind will help you create a coherent technical presentation that can serve its purpose.
Latest Articles
![technical presentation tips](https://cdn.prod.website-files.com/622217140a9cad5092ea9b25/66c76b040950d6dfdf8b9b23_Top%20Presentation%20Statistics%20for%202026%20(1).jpg)
August 22, 2024
[UPDATED] Top Presentation Statistics for 2024
Decktopus shared a survey and collected data on presentation related trends and tendencies. The survey results reflect the responses of over 300+ participants, with significant participation from business professionals, academics and student bodies.
![technical presentation tips](https://cdn.prod.website-files.com/622217140a9cad5092ea9b25/66c5b3b2a2f5062800192fe6_What%20Are%20Segments_%20Clarity%20on%20Definition%20%26%20Purpose.jpg)
August 21, 2024
What Are Segments? Clarity on Definition & Purpose
Discover what segments mean in market segmentation: filter & organize contacts effectively!
![technical presentation tips](https://cdn.prod.website-files.com/622217140a9cad5092ea9b25/6680012ddc96494ebc7f27cb_The%20Ultimate%20Guide%20(1).jpg)
The Ultimate Guide to the Best AI Pitch Deck Generators: Free and Paid Options for Creating Stunning Pitch Decks
Discover the best AI pitch deck generators to streamline creating decks for investors. Ideal for entrepreneurs and startups, these AI tools help craft the perfect pitch deck effortlessly.
![technical presentation tips](https://cdn.prod.website-files.com/622217130a9cad1a33ea9b0a/62261fdd465f0dd2b6f3e2cc_lead%20generation%20slide%20pages.png)
Don't waste your time designing your presentations by yourself!
Type your content and let our platform design your presentations automatically. No more wasting time for your presentations. Use hundreds of presentation templates to impress your audience. This is the only tool you need to prepare presentations. Try our Presentation Builder today >>
Don’t waste your time by trying to make a website for all your content
Place your content links and let our platform design your bio link automatically. No more wasting time for your social content distribution. Use hundreds of presentation biolink to impress your audience. This is the only tool you need to prepare good-looking bio links. Try our Bio Link Builder today >>
Do You Want To Create a Presentation?
Sign up for our newsletter to stay up-to-date on the latest news and tips from Decktopus.
Let’s create a form here to get visitors’ email addresses.
Ready to dive in? Start your free trial today.
- Assured PNT
- RF Solutions
- High Vibration
- Space Solutions
- High Performance Oscillators
- Space Oscillators
- Atomic Clocks
- Clocks & Oscillators
- Crystals & Transducers
- Filters & Multiplexers
- Company History
Inside Frequency Control
A quick guide to building effective technical presentations.
![technical presentation tips technical presentation tips](https://blog.bliley.com/hs-fs/hubfs/Logo_Files/Bliley_Favicon.png?width=50&height=50&name=Bliley_Favicon.png)
As an expert in a technical field, you will occasionally be called upon to give a presentation on your work to people who are not very familiar with your field, such as your company's sales and marketing team. You need to be aware of the proper communication techniques to be able to place highly technical facts before your listeners in a manner they can understand.
Here is a quick guide to building an effective technical presentation:
1. know your audience.
There are a few questions you will need to ask yourself before your technical presentation to determine the type of presentation to prepare. How familiar is the audience with the subject? Are they experts or novices in the field? What style of presentation are they used to sitting through? Will they understand technical terms or do you need to use simpler language? Do they respond better to a lecture or a more interactive learning session?
Once the answers to these questions have been determined, you can set about creating a technical presentation that caters specifically to the tastes and preferences of your audience.
2. Limit Your Subject
Determine beforehand how technical your presentation needs to be in order to get the point across. Only go as deeply into the subject as required, and avoid throwing in terms and references which have nothing to do with the subject at hand.
3. Make an Outline
Now it's time to break down the presentation into smaller chunks that focus on one point at a time. With technical presentations, it is useful to have three sections to a presentation. The first section identifies the main subject and provides a summary of its broad definition and why it has become the subject of the presentation.
The second section goes more deeply into the main subject and provides the minute technical details which the audience needs to understand about the topic. The final section offers a solution or resolution to the problem presented through the presentation. You can also add in a course of action that is being taken or should be taken in the near future at the end of the technical presentation.
4. Use Visual Aids
![technical presentation tips powerpoint-presentation-orange.png](https://blog.bliley.com/hs-fs/hubfs/Blog/powerpoint-presentation-orange.png?width=462&name=powerpoint-presentation-orange.png)
When dealing with technical jargon, don't just depend on your speech to get the point across to the listeners. Ensure that they truly grasp the meaning of your words with the help of visual aids. Creating a PowerPoint presentation is the most useful tool in this regard since it will allow you to add graphs, statistics, and animation to your technical presentation. But you can also make use of handmade models, working prototypes and other visual aids in your presentation.
5. Approach the Subject from Different Angles
Don't focus only on your work in relation to the subject. Try to present a comprehensive view of the topic which also includes its sales, marketing, and business side. Remember that the audience likely has a different relationship to the subject matter than you do, so try to include content relating to the subject from their point of view as well.
6. Be Prepared for Questions
Finishing your lecture won't be the end of your technical presentation. There is almost always a question and answer session afterward during which the audience will ask you for greater details about the information presented. Do your homework beforehand to prepare for any questions that might be asked.
Keeping these points in mind will help ensure that your knowledge is presented in an attractive and easily understandable manner which will create a positive impression and provide a useful, comprehensive and enlightening technical presentation to the audience.
At Bliley, we often collaborate on projects and presentations. Learn about our favoriate collaboration tools here . What applications do you use to collaborate or prepare presentations? We'd love to hear from you!
![technical presentation tips Bliley Engineer Recrutng](https://no-cache.hubspot.com/cta/default/2222150/c5aae94a-90d6-4416-aa59-3636fbfcdd3e.png)
Topics: engineering , general
![GPSDO Oscillator Infrastructure Ebook.png GPSDO Oscillator Infrastructure Ebook.png](https://blog.bliley.com/hs-fs/hubfs/Blog/GPSDO%20Oscillator%20Infrastructure%20Ebook.png?width=240&name=GPSDO%20Oscillator%20Infrastructure%20Ebook.png)
Subscribe... get an eBook!
- crystal oscillators (68)
- RF Technology (63)
- Space & Satellites (43)
- engineering (38)
- general (38)
- Defense & PNT (26)
- General Topics (26)
- Press Release (22)
- Clocks & Crystals (20)
- Military & Defense (17)
- aerospace (17)
- Leadership (16)
- Integrated RF (14)
- GPS & GNSS (9)
- Engineering Equiptment (7)
- Filters & Multiplexers (1)
See What's Popular
Most recent.
![technical presentation tips 4 applications that require ultra-stable oscillators](https://blog.bliley.com/hs-fs/hubfs/4-applications-that-require-ultra-stable-oscillators.jpg?width=100&height=50&name=4-applications-that-require-ultra-stable-oscillators.jpg)
Disclosure: This blog contains product affiliate links to help support the blog. We only link trusted, well-rated products.
Epic content.
- Privacy Policy
![Linkedin Linkedin](https://blog.bliley.com/hs-fs/hubfs/BlileyTechnologies_June2017/Images/linkedin.png?width=20&height=20&name=linkedin.png)
© 2024 Bliley | Refund and Return Policy | Privacy Policy | Powered by Piconsulting
More From Forbes
Best practices for virtual presentations: 15 expert tips that work for everyone.
- Share to Facebook
- Share to Twitter
- Share to Linkedin
In today’s COVID-19 world, virtual meetings and presentations have become the norm. While many presentation skills and best practices apply to both in-person and virtual presentations, expert virtual presenters understand the importance of adjusting their approach to match the medium. With in-person presentations, you more or less have a captive audience — you still need be engaging, but your audience is kind of stuck with you for the duration. But with virtual presentations, your audience has a greater opportunity to stray. You now have to compete for their eyes, ears, hearts, and minds against diminished attention spans, increased home and work life distractions, and conflicting priorities.
Here are 15 expert tips to set you up for success in your next virtual presentation:
1. Get the Lighting Right: As a presenter, it is essential that people can see you well. Make sure you have good front light—meaning the light shines brightly on your face. If your back is to a window, close the shades. While natural light is often the best choice, if your home office doesn’t have natural light and you do a lot of virtual presentations, consider purchasing supplemental lighting to enhance your image.
2. Choose the Right Background: Try to use a background that enhances your professional image and is aligned with your message. Avoid a cluttered background or anything that can be distracting. Learn whether your presentation platform enables you to use virtual backgrounds (like Zoom) or whether you can blur your background (like Microsoft Teams). Your background can either add to your professional presence or detract from it.
3. Know the Technology: Nothing kills a presentation faster than a presenter who fumbles with the technology. This is a performance, so make sure you know how to make it work. A dry run is essential so that you’re comfortable with the platform features. It’s best to have a co-host (or producer or moderator) assist you with the technology so that you can focus on your presentation. Make sure you practice with the same technical set up (computer and internet connection) that you will use when you deliver the presentation.
4. Play to the Camera: When you are the one speaking, look directly into your computer’s camera , not on the screen or at the other participants. This takes some practice, but it makes the viewer feel as if you are looking right at them. Some presenters turn off their self-view so that they aren’t distracted by their own image. Put the camera at eye level . Try not to have your camera too far above or below you. If it’s too low, then you run the risk of creating a double chin. A camera too high makes it difficult to maintain eye contact, as you may find your gaze dropping as you speak. If you are part of a panel or a team of presenters, make sure you are aware of when your camera is on. If you are not speaking but your camera is on, make sure you look like you are paying attention! Powerful presenters understand the importance of making eye contact with their audience, so this means you have to simulate the same effect virtually.
Best Travel Insurance Companies
Best covid-19 travel insurance plans.
5. Get Close (But Not Too Close). You want the camera to frame your face, neck, and shoulders. People are drawn to faces, so you don’t want to lose that connection by being too far away, but you also don’t want your face to take over the whole screen like a dismembered head because, well, that looks weird. Practice your positioning and distance.
6. Stand Up: If possible, use a standing desk or position your laptop so you can stand at eye level with your computer. Standing up provides a higher energy level and forces us to put our body in a more presentation-like mode. If you have to sit, lean forward as you would if you were presenting at a real meeting or as if you were a TV news anchor. Avoid slouching away from the camera, as that sends a signal that you are disconnected from the audience.
7. Be Animated: Just like in a live presentation, you want to present with a little energy and animation. Too slow or too monotone in your voice makes it easy for folks to disengage and tune out. Keeping people engaged virtually requires you to actually be engaging.
8. Pace Yourself: Without real-time visual audience feedback cues, getting the pacing right can be difficult. Even though you want to infuse some animation and energy into your presentation don’t pump up the speed too much. If you tend to be a fast talker in real life, practice slowing down just a bit. If you’re a slow talker, you may want to speed up just a bit.
9. Do A Sound Check: If your sound is garbled, people will tune out. While people may forgive less than perfect video, if they can’t clearly hear you, they will leave. Practice with someone on the other end of the presentation platform. Make sure your sound emits clearly. Sometimes headphones or external microphones work better than the computer audio, sometimes not. Every platform is different, so make sure your sound quality is excellent every time. And again, you should practice with the same technical configurations and location that you will use for your presentation.
10. Plug into Your Modem: If possible, plug your computer directly into your modem using an Ethernet cable. This will give you the strongest signal and most stable internet connection. The last thing you want to happen during your presentation is to have a weak or unstable internet signal.
11. Incorporate Redundant Systems. If using slides, make sure someone else (another webinar co-host or producer) also has a copy of the slides just in case your internet goes wonky and you have to present by calling in. If you are using slides, make them visually appealing. Use high-quality graphics and limit the amount of text on each slide. It’s your job as presenter to deliver the content. The slides are meant to enhance your spoken words, not replace them.
12. Engage Your Participants. Just as if you were doing an in-person presentation, craft your presentation to engage the audience. Incorporate chats, polls, raised hand features, etc. Try not to speak for more than ten minutes without some sort of audience engagement. Use the participant list to interact with your participants by name. Have people chat or raise a hand if they want to speak. Keep track of the order of people and then call on them to invite them to turn on their mics or cameras.
13. Let Someone Else Check the Chats. Don’t get sidetracked by the chats during your presentation. You’ll be shocked at how distracting it is to your train of thought if you attempt to read the chats while speaking. Instead, have your co-host or producer monitor the chats. If you ask people to chat you answers or comments to a question you’ve posed, then pause your talking and engage directly with the chats by acknowledging them, reading them out loud, and commenting on them.
14. Evaluate and Enhance: If possible, record the session and take the time to play back and look for areas that worked well and areas that you might want to improve upon. Great presenters, whether virtual or in person, understand the value of continually honing their craft. Be sure to acknowledge your strengths as well as your areas of improvement.
15. Be Yourself and Have Fun: Again, just like in face-to-face presentations, audiences connect to authenticity, so be yourself! Let your personality show through. Have fun. If you look like you’re enjoying the presentation so will others. Research shows that happy people retain information better than bored or disinterested people, so model the energy that you want to create. The audience takes its cue from you.
Remember, whether you are presenting in-person or virtually, all presentations are performances. And all performances are in service to your audience. Their time is valuable, so honor that time by delivering the best presentation you can. No matter what kind of presentation you are giving, you must find ways to create authentic audience connection, engagement, and value.
- Editorial Standards
- Reprints & Permissions
![technical presentation tips Duarte logo](https://www.duarte.com/wp-content/uploads/2024/03/logoMobileHeader-DuarteD-White-2x.png)
VisualStory®
- Duarte DataStory®
- Presentation Principles™
Slide:ology®
Slide Design
- Speaker Coaching
- Presenting Virtually™
- Illuminate™
- Adaptive Listening™
- Team training
- Learning journeys
- Brand and product storytelling
- Keynotes and events
- Sales enablement
- Communication systems
- Accelerator Lab™
- Our culture
- Our leaders
- Case studies
- Media mentions
Guides and tools
- Learner support
6 signs your organization needs a better presentation template
![technical presentation tips 6 signs your organization needs a better presentation template header](https://www.duarte.com/wp-content/uploads/2024/08/6-signs-your-organization-needs-a-better-presentation-template-header-800x450.jpg)
Josh Storie
A good presentation template can work wonders. It can save your people time. It can boost your brand. It can help everyday presentations look clean and professional. It can also make it easy to convey an idea clearly and memorably.
But a bad template? It can do exactly the opposite. It can take up valuable employee time. It can dilute and harm your brand. It can make your presentations look, as the kids say, “cringe.” And it can harm the clarity of your message .
At Duarte, we’ve made thousands of presentations over our 35+ year history for some of the world’s biggest brands. From internal corporate decks, investor pitches , walking decks , sales enablement decks, conference keynote presentations … the list goes on.
Today we’re going to dive into the use cases of a presentation template, and when a company might need or want one.
![technical presentation tips "Never deliver a presentation you wouldn't want to sit through" Duarte's Golden Rule](https://www.duarte.com/wp-content/uploads/2024/08/Never-deliver-a-presentation-you-wouldnt-want-to-sit-through-quote-image-800x360.png)
What is a presentation template?
A presentation template is a set of pre-designed slides already made with a branded, professional look that can be lightly customized for a specific purpose. They typically are made for the purpose of scaling efforts, and in a corporate setting, are used for sales enablement , sales pitches, corporate internal decks, branding and marketing decks, and more.
These templates usually include on-brand design elements like backgrounds, effects, color palettes, layouts, fonts, icon libraries, asset libraries, chart libraries, boilerplate messaging and sample slides for different use cases. They save an organization an immense amount of time as individuals won’t need to design every presentation they make from scratch. They can just select from their pre-determined template the slides and options they want to use for their individual use case.
The best presentation templates are also audience-first . Meaning, they’re designed with the end user in mind so that they are engaging, relatable, and even accessible so all can feel included and welcome during any presentation.
6 signs to know if your organization needs a presentation template
1. people don’t use the template you already have..
If you hear people in your organization say that using your current template is “too hard” or that “it doesn’t have what I need,” you need a better template. Or maybe people use it, but only halfway. If you see people Frankenstein-ing presentations together by inserting their own icons and pictures, using all kinds of different fonts, or pulling slides from a variety of other decks because the current template doesn’t give them the slide layouts or assets they need, it’s time for a better deck.
Why this matters: This is a huge time waster. One example, if your sales team is constantly reinventing the wheel and making a new sales pitch deck for every other sales demo, this is costing you and them valuable time. It’s less time on the phone, and more time working on something that could’ve been handed to them already done, and in a clean, professional, and scalable way, like what we did with Veeam .
2. You need consistency that scales.
Think about if you were running a big conference or event with lots of breakouts, like Dreamforce . It would take an internal design team hundreds of hours to make all those presentations. But the flipside is if your speakers are in charge of making their own slides, it’s tough to ensure consistency across every breakout, as well.
Why this matters: If you had a great slide template that can scale, it would ensure every audience in every room is receiving the same level of quality and user experience with your brand and event.
3. It’s clear your sales team isn’t comfortable with graphic design.
Great salespeople adapt their sales pitch to the needs of the customers. But adapting the pitch oftentimes means adapting the slides. And since your sales team wasn’t hired for their graphic design skills, the new slides can detract from the pitch itself (and probably make their marketing counterparts cringe in disbelief.)
Why this matters: Meeting with potential clients is another touchpoint with your brand. Sales meetings (and the decks within them) should match the professional look of your website, the first-class feeling they’ll receive from your product and service, and the professional experience they’ll receive from your sales team by being a part of your sales funnel. A professional sales deck that doesn’t look like a default PowerPoint template is imperative to not just stand out, but get the point across that your companies cares about details.
![technical presentation tips Sales enablement blog cta](https://no-cache.hubspot.com/cta/default/1619981/aa317f6d-ec36-4a95-b765-a97a37480553.png)
4. New technology is limiting technical abilities.
Let’s say you’re making the switch to or from a new slide software like PowerPoint, Google Slides, Apple Keynote , or Canva. There’s always a learning curve when a new technology is introduced. And if there’s not a template that helps users produce quality presentations regardless of their familiarity with the new software, it won’t take long to realize you’re in need of a better template.
Why this matters: Our world-class presentation designers make slide templates in whatever presentation software tool your company prefers. Trust us; we know a thing or two about converting fonts, colors, aspect ratios, and more when it comes to slide presentations built on different platforms. Let us save you the headache and time.
5. Your unique brand needs to stand out.
Whether you sell chocolate or medical devices , your presentation template systems need to be the perfect combination of consistent, business-specific design and ease of use. This means it needs to be on-brand, in your color palette, catered to your audience, and it should include simple rules to follow and easily adaptable templates. One way we help with this is by including icon and asset libraries.
Asset libraries
Great presentations use a variety of visual elements to support content. Our presentation designers will make, and stock your asset library with beautiful, clever, and effective illustrations and images. This way, everyone who will make presentations with your slide template can easily access approved visual elements.
Icon libraries
Our presentation designers are artists. And they often make custom icons for our clients, including custom icon libraries. We take the time to understand the needs of your presentation deck, your business, and your customers, and we tailor everything we do accordingly.
Why this matters: Never send your employees to hunt for a perfect icon or image again, especially when they don’t exist! Equip them with everything they need for all business use cases in advance.
6. Your employees need template training.
You can arm your company with a wonderful presentation template, but that is half the battle. Now, you need to make sure they are oriented on where to find everything they need and how to use it. This will ensure faster adoption.
We provide presentation guidelines, walkthroughs, and mini-tutorials when we hand over our presentation templates to our clients. Sometimes we’ll even do a quick sales enablement training live .
Why this matters: We ensure that our template systems are fool-proof. They can stand up to the worst of conditions, like bad lighting, meeting accessibility standards , projection system variations, and inexperienced users.
![technical presentation tips Communication system colored button](https://no-cache.hubspot.com/cta/default/1619981/8779a717-069c-4827-92b7-2238c4c94a7a.png)
How to make perfect presentations every time
Your unique industry requires a presentation ecosystem. This usually includes:
- Audience needs
- Calls to action
![technical presentation tips Presentation templates system example](https://www.duarte.com/wp-content/uploads/2024/08/Presentation-templates-system-example-800x392.jpg)
We are the experts in presentation structure and have a highly-rated workshop designed to help you become a persuasive communicator . At the conclusion of the workshop, you’ll know how to check that all your presentations have the ingredients needed to be successful. If you want to train a marketing or graphic design team on our presentation expertise, we recommend a learning journey that includes:
- Slide:ology ®
But what if you don’t have time to train yourself or your team to be presentation masters? Well, we have an Agency team for that. Whether you need a quick audit of your template , or a full presentation system complete with icon libraries, image libraries, chart examples, and built-in user instruction, Duarte can help.
Talk to a Solution Architect today to discover what hundreds of clients have already: Our presentations are world-class, and we’ve tested them across every type of delivery channel you can think of. Try the Duarte white-glove experience for yourself.
![technical presentation tips Duarte logo](https://www.duarte.com/wp-content/uploads/2024/03/logoMobileHeader-DuarteD-Black-80x80.png)
Check out these related courses
Structure and storyboard a talk
Analyze your audience and organize your ideas into a story structure that will move them. Transform content into visual concepts and build a storyboard for your presentation.
Craft a persuasive talk
Learn how the world’s greatest speakers use story to persuade. Develop a story structure that powerfully expresses your ideas, applying the principles of empathy, contrast, and variety.
Presentation Principles™
Learn presentation basics
Follow a step-by-step method to write compelling stories, amplify ideas visually, and present with confidence while learning at your own pace.
Turn ideas into visuals
Use visual thinking and design principles to transform information into effective and memorable graphics for presentations.
Build effective slides
Create attractive slide decks using presentation software, even if you’re not a designer. Our training, tips, and tricks will help you work smarter, faster, and more efficiently.
Create “skimmable” documents
Build helpful pre-reads and impactful leave-behinds with presentation software to support knowledge sharing and decision-making.
Check out these related resources
![technical presentation tips What sets a top presentation design agency apart from the rest header](https://www.duarte.com/wp-content/uploads/2024/06/What-sets-a-top-presentation-design-agency-apart-from-the-rest-header-800x450.jpg)
What sets a top presentation design agency apart from the rest?
The presentation design agencies do more than just “clean up your slides.” Learn the difference between hiring a presentation designer, a basic presentation design company, and a premium presentation design agency.
![technical presentation tips A computer screen shows a slide editor making changes to a presentation.](https://www.duarte.com/wp-content/uploads/2024/04/Slide-Design-course-overview-thumbnail-800x450.jpg)
Slide Design course overview
Create attractive slide decks using presentation software, even if you’re not a designer. Our training, tips, and tricks will help you work smarter, faster, and more efficiently.
![technical presentation tips Three books for the "Slide:ology" workshop.](https://www.duarte.com/wp-content/uploads/2024/04/Slideology-workshop-overview-thumbnail-800x450.jpg)
Slide:ology ® workshop overview
Use visual thinking and design principles to transform information into effective and memorable graphics for presentations.
![technical presentation tips A computer screen shows three types of slide docs, Beginning, Middle, and End.](https://www.duarte.com/wp-content/uploads/2024/04/Presentation-Principles-course-overview-thumbnail-800x450.jpg)
Presentation Principles™ course overview
Follow a step-by-step method tell compelling stories, amplify your ideas visually, and present with confidence while learning at your own pace.
![technical presentation tips 17 rhetorical devices that will make you sound like steve jobs header](https://www.duarte.com/wp-content/uploads/2024/05/16-rhetorical-devices-that-will-make-you-sound-like-Steve-Jobs.jpg)
17 rhetorical devices that will make you sound like Steve Jobs
Want to communicate like Steve Jobs? Join us in an analysis of one of his most famous speeches and how he employed rhetorical devices to make it memorable and moving.
![technical presentation tips Ultimate guide to contrast, what your presentation is missing header](https://www.duarte.com/wp-content/uploads/2024/08/Ultimate-guide-to-contrast-what-your-presentation-is-missing-header-800x450.png)
The ultimate guide to contrast: What your presentation is missing
Need to deliver a great presentation? Master the art of contrast to make sure it’s unforgettable and met with success, every time.
![](http://help4study.online/777/templates/cheerup1/res/banner1.gif)
IMAGES
COMMENTS
However, if you are someone who values continuous improvement - and I am - you need to do the uncomfortable. Here's my five-years-later Updated Tips for a Successful Technical Presentation. 1. Have a Reset Strategy (One-Click) If you're going to give a talk, you'll probably have to give it more than once.
Here are a few tips for business professionals who want to move from being good speakers to great ones: be concise (the fewer words, the better); never use bullet points (photos and images paired ...
However, there are steps you can take to deliver an effective technical presentation that gets your point across and appeals to the audience. Whether you're presenting in person or via web conferencing software , the following tips and best practices will help you be prepared, feel more confident, and set up the tools you need to conduct your ...
By doing so, you will be more . . . Engaging. By directing your presentation to the audience's needs, you'll increase attention and retention. Efficient. By creating an audience-centric presentation from the start, you'll find it easier to plan and deliver a relevant and memorable talk. Effective.
Here are quick tips to make effective font and color choices: Readability: Use simple, easy-to-read fonts that can be seen from far away. Avoid fancy or complex fonts that can make reading difficult. Consistency: For a professional look, limit your presentation to two font styles: headings and body text.
Another way to make a technical topic easy to digest is to keep your presentation brief. One trick is to create an outline to distill your message into 3-5 key points. Another is to use Guy Kowasaki's 10/20/20 rule (10 slides, 20 minutes, and a minimum of 30 font) to force yourself to be concise.
5 Critical Best Practices to Implement These Pro PowerPoint Tips and Tricks for a Technically Proficient Presentation. Enhance the technical brilliance of your presentation by focusing on these crucial best practices: 1. Streamlined Font Selection. Practice: Limit your font styles to a maximum of three per slide.
Essentially, the success of a presentation depends on how much can each recipient take away. Hence, having a clear idea of who the recipient is makes it straightforward in shaping the presentation's content. This includes. gauge the complexity of topics to covers; determine the background context to include; shaping the jargon around technical ...
Frame your story (figure out where to start and where to end). Plan your delivery (decide whether to memorize your speech word for word or develop bullet points and then rehearse it—over and ...
Every presentation will not be perfect but each is a learning opportunity for the next one. There you have it. This is a lot of text to read, but I am sure glad you did. I am in no way perfect and I am always looking to improve my presentation skills, so if you have your own tips and tricks please share them in the comments below.
PowerPoint Tips. Figure 16.1: It can be scary looking at a large audience, even for us who do it a lot. One important, but often overlooked, skill in engineering is presenting. From talking with students, I have noticed that a lot of engineering students are intimidated by public speaking.
Apply the 10-20-30 rule. Apply the 10-20-30 presentation rule and keep it short, sweet and impactful! Stick to ten slides, deliver your presentation within 20 minutes and use a 30-point font to ensure clarity and focus. Less is more, and your audience will thank you for it! 9. Implement the 5-5-5 rule. Simplicity is key.
7. Share With a Friend. If the stakes are high for your presentation, it's never too early to get feedback from those that you trust. Here's an article that helps you collaborate as a team on a PowerPoint presentation. Get PowerPoint design tips from those that you trust when you collaborate.
Presentation skills are the abilities and qualities necessary for creating and delivering a compelling presentation that effectively communicates information and ideas. They encompass what you say, how you structure it, and the materials you include to support what you say, such as slides, videos, or images. You'll make presentations at various ...
These basic tips from a few years back still stand - 11 Top Tips for a Successful Technical Presentation, but this post is about the actual preparation process and some tips and techniques that might help. I thought I did a good job, with 72 slides and 8 demos in 75 minutes and only one person said it felt rushed in the comments.
I describe some strategies for crafting an effective technical presentation by staying focused on your message and your audience's perspective. I also provid...
Use color, callouts (e.g., arrows or speech bubbles), or other mechanisms to draw attention to the most important parts of your slides or graphs. For example, suppose you have a list of 3-5 bullet points, each one line of text long. You might want to emphasize the 1-3 most important words in each bullet point. Color.
And yes, keep your presentation short - not more than 10 slides. You can go for the 10/20/30 rule, i.e., 10 slides, 20 minutes, and 30 font size. 6. Leave space for questions and queries. Since your presentation is technical and the audience might be diverse, be prepared to answer questions. The major cause of anxiety before a presentation is ...
Determine beforehand how technical your presentation needs to be in order to get the point across. Only go as deeply into the subject as required, and avoid throwing in terms and references which have nothing to do with the subject at hand. 3. Make an Outline. Now it's time to break down the presentation into smaller chunks that focus on one ...
Here are 15 expert tips to set you up for success in your next virtual presentation: 1. Get the Lighting Right: As a presenter, it is essential that people can see you well. Make sure you have ...
Visual aids and other technical support can transform an otherwise good presentation into a wow-worthy one. A few popular presentation tools include: ... Tips to help you ace your presentation. Your presentation isn't about you but the material you're presenting. Sometimes, reminding yourself of this ahead of taking centre stage can help ...
Why this matters: Our world-class presentation designers make slide templates in whatever presentation software tool your company prefers. Trust us; we know a thing or two about converting fonts, colors, aspect ratios, and more when it comes to slide presentations built on different platforms. Let us save you the headache and time. 5.