dissertation abstract what is it

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on February 28, 2019 by Shona McCombes . Revised on July 18, 2023 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a thesis ,  dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, other interesting articles, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the US during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

Receive feedback on language, structure, and formatting

Professional editors proofread and edit your paper by focusing on:

• Academic style
• Vague sentences
• Style consistency

See an example

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book or research proposal
• Applying for research grants

It’s easiest to write your abstract last, right before the proofreading stage, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your dissertation topic , but don’t go into detailed background information. If your abstract uses specialized terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyze,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Next, summarize the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalizability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarize the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services or use the paraphrasing tool .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Anchoring bias
• Halo effect
• The Baader–Meinhof phenomenon
• The placebo effect
• Nonresponse bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarizes the contents of your paper.

An abstract for a thesis or dissertation is usually around 200–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis , dissertation or research paper .

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page in the thesis or dissertation , after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

McCombes, S. (2023, July 18). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved July 9, 2024, from https://www.scribbr.com/dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, shorten your abstract or summary, how to write a literature review | guide, examples, & templates, get unlimited documents corrected.

✔ Free APA citation check included ✔ Unlimited document corrections ✔ Specialized in correcting academic texts

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

The Dissertation Abstract: 101

How to write a clear & concise abstract (with examples).

By:   Madeline Fink (MSc) Reviewed By: Derek Jansen (MBA)   | June 2020

So, you’ve (finally) finished your thesis or dissertation or thesis. Now it’s time to write up your abstract (sometimes also called the executive summary). If you’re here, chances are you’re not quite sure what you need to cover in this section, or how to go about writing it. Fear not – we’ll explain it all in plain language , step by step , with clear examples .

Overview: The Dissertation/Thesis Abstract

• What exactly is a dissertation (or thesis) abstract
• What’s the purpose and function of the abstract
• Why is the abstract so important
• How to write a high-quality dissertation abstract
• Example/sample of a quality abstract
• Quick tips to write a high-quality dissertation abstract

What is an abstract?

Simply put, the abstract in a dissertation or thesis is a short (but well structured) summary that outlines the most important points of your research (i.e. the key takeaways). The abstract is usually 1 paragraph or about 300-500 words long (about one page), but but this can vary between universities.

A quick note regarding terminology – strictly speaking, an abstract and an executive summary are two different things when it comes to academic publications. Typically, an abstract only states what the research will be about, but doesn’t explore the findings – whereas an executive summary covers both . However, in the context of a dissertation or thesis, the abstract usually covers both, providing a summary of the full project.

In terms of content, a good dissertation abstract usually covers the following points:

• The purpose of the research (what’s it about and why’s that important)
• The methodology (how you carried out the research)
• The key research findings (what answers you found)
• The implications of these findings (what these answers mean)

We’ll explain each of these in more detail a little later in this post. Buckle up.

What’s the purpose of the abstract?

A dissertation abstract has two main functions:

The first purpose is to  inform potential readers  of the main idea of your research without them having to read your entire piece of work. Specifically, it needs to communicate what your research is about (what were you trying to find out) and what your findings were . When readers are deciding whether to read your dissertation or thesis, the abstract is the first part they’ll consider. 

The second purpose of the abstract is to  inform search engines and dissertation databases  as they index your dissertation or thesis. The keywords and phrases in your abstract (as well as your keyword list) will often be used by these search engines to categorize your work and make it accessible to users. 

Simply put, your abstract is your shopfront display window – it’s what passers-by (both human and digital) will look at before deciding to step inside. 

Why’s it so important?

The short answer – because most people don’t have time to read your full dissertation or thesis! Time is money, after all…

If you think back to when you undertook your literature review , you’ll quickly realise just how important abstracts are! Researchers reviewing the literature on any given topic face a mountain of reading, so they need to optimise their approach. A good dissertation abstract gives the reader a “TLDR” version of your work – it helps them decide whether to continue to read it in its entirety. So, your abstract, as your shopfront display window, needs to “sell” your research to time-poor readers.

You might be thinking, “but I don’t plan to publish my dissertation”. Even so, you still need to provide an impactful abstract for your markers. Your ability to concisely summarise your work is one of the things they’re assessing, so it’s vital to invest time and effort into crafting an enticing shop window.  

A good abstract also has an added purpose for grad students . As a freshly minted graduate, your dissertation or thesis is often your most significant professional accomplishment and highlights where your unique expertise lies. Potential employers who want to know about this expertise are likely to only read the abstract (as opposed to reading your entire document) – so it needs to be good!

Think about it this way – if your thesis or dissertation were a book, then the abstract would be the blurb on the back cover. For better or worse, readers will absolutely judge your book by its cover .

How to write your abstract

As we touched on earlier, your abstract should cover four important aspects of your research: the purpose , methodology , findings , and implications . Therefore, the structure of your dissertation or thesis abstract needs to reflect these four essentials, in the same order.  Let’s take a closer look at each of them, step by step:

Step 1: Describe the purpose and value of your research

Here you need to concisely explain the purpose and value of your research. In other words, you need to explain what your research set out to discover and why that’s important. When stating the purpose of research, you need to clearly discuss the following:

• What were your research aims and research questions ?
• Why were these aims and questions important?

It’s essential to make this section extremely clear, concise and convincing . As the opening section, this is where you’ll “hook” your reader (marker) in and get them interested in your project. If you don’t put in the effort here, you’ll likely lose their interest.

Step 2: Briefly outline your study’s methodology

In this part of your abstract, you need to very briefly explain how you went about answering your research questions . In other words, what research design and methodology you adopted in your research. Some important questions to address here include:

• Did you take a qualitative or quantitative approach ?
• Who/what did your sample consist of?
• How did you collect your data?
• How did you analyse your data?

Simply put, this section needs to address the “ how ” of your research. It doesn’t need to be lengthy (this is just a summary, after all), but it should clearly address the four questions above.

Need a helping hand?

Step 3: Present your key findings

Next, you need to briefly highlight the key findings . Your research likely produced a wealth of data and findings, so there may be a temptation to ramble here. However, this section is just about the key findings – in other words, the answers to the original questions that you set out to address.

Again, brevity and clarity are important here. You need to concisely present the most important findings for your reader.

Step 4: Describe the implications of your research

Have you ever found yourself reading through a large report, struggling to figure out what all the findings mean in terms of the bigger picture? Well, that’s the purpose of the implications section – to highlight the “so what?” of your research. 

In this part of your abstract, you should address the following questions:

• What is the impact of your research findings on the industry /field investigated? In other words, what’s the impact on the “real world”. 
• What is the impact of your findings on the existing body of knowledge ? For example, do they support the existing research?
• What might your findings mean for future research conducted on your topic?

If you include these four essential ingredients in your dissertation abstract, you’ll be on headed in a good direction.

Example: Dissertation/thesis abstract

Here is an example of an abstract from a master’s thesis, with the purpose , methods , findings , and implications colour coded.

The U.S. citizenship application process is a legal and symbolic journey shaped by many cultural processes. This research project aims to bring to light the experiences of immigrants and citizenship applicants living in Dallas, Texas, to promote a better understanding of Dallas’ increasingly diverse population. Additionally, the purpose of this project is to provide insights to a specific client, the office of Dallas Welcoming Communities and Immigrant Affairs, about Dallas’ lawful permanent residents who are eligible for citizenship and their reasons for pursuing citizenship status . The data for this project was collected through observation at various citizenship workshops and community events, as well as through semi-structured interviews with 14 U.S. citizenship applicants . Reasons for applying for U.S. citizenship discussed in this project include a desire for membership in U.S. society, access to better educational and economic opportunities, improved ease of travel and the desire to vote. Barriers to the citizenship process discussed in this project include the amount of time one must dedicate to the application, lack of clear knowledge about the process and the financial cost of the application. Other themes include the effects of capital on applicant’s experience with the citizenship process, symbolic meanings of citizenship, transnationalism and ideas of deserving and undeserving surrounding the issues of residency and U.S. citizenship. These findings indicate the need for educational resources and mentorship for Dallas-area residents applying for U.S. citizenship, as well as a need for local government programs that foster a sense of community among citizenship applicants and their neighbours.

Practical tips for writing your abstract

When crafting the abstract for your dissertation or thesis, the most powerful technique you can use is to try and put yourself in the shoes of a potential reader. Assume the reader is not an expert in the field, but is interested in the research area. In other words, write for the intelligent layman, not for the seasoned topic expert. 

Start by trying to answer the question “why should I read this dissertation?”

Remember the WWHS.

Make sure you include the  what , why ,  how , and  so what  of your research in your abstract:

• What you studied (who and where are included in this part)
• Why the topic was important
• How you designed your study (i.e. your research methodology)
• So what were the big findings and implications of your research

Keep it simple.

Use terminology appropriate to your field of study, but don’t overload your abstract with big words and jargon that cloud the meaning and make your writing difficult to digest. A good abstract should appeal to all levels of potential readers and should be a (relatively) easy read. Remember, you need to write for the intelligent layman.

Be specific.

When writing your abstract, clearly outline your most important findings and insights and don’t worry about “giving away” too much about your research – there’s no need to withhold information. This is the one way your abstract is not like a blurb on the back of a book – the reader should be able to clearly understand the key takeaways of your thesis or dissertation after reading the abstract. Of course, if they then want more detail, they need to step into the restaurant and try out the menu.

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

19 Comments

This was so very useful, thank you Caroline.

Much appreciated.

This information on Abstract for writing a Dissertation was very helpful to me!

This was so useful. Thank you very much.

This was really useful in writing the abstract for my dissertation. Thank you Caroline.

Very clear and helpful information. Thanks so much!

Fabulous information – succinct, simple information which made my life easier after the most stressful and rewarding 21 months of completing this Masters Degree.

Very clear, specific and to the point guidance. Thanks a lot. Keep helping people 🙂

This was very helpful

Thanks for this nice and helping document.

Nicely explained. Very simple to understand. Thank you!

Waw!!, this is a master piece to say the least.

Very helpful and enjoyable

Thank you for sharing the very important and usful information. Best Bahar

Very clear and more understandable way of writing. I am so interested in it. God bless you dearly!!!!

Really, I found the explanation given of great help. The way the information is presented is easy to follow and capture.

Wow! Thank you so much for opening my eyes. This was so helpful to me.

Thanks for this! Very concise and helpful for my ADHD brain.

I am so grateful for the tips. I am very optimistic in coming up with a winning abstract for my dessertation, thanks to you.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 416 other subscribers.

Email Address

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

• Why did you do this study or project?
• What did you do and how?
• What did you find?
• What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

• Size - A succinct and well written abstract should be between approximately 100- 250 words.
• Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
• Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
• Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
• Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
• Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
• The primary take-home message.
• Any additional findings of importance.
• Implications for future studies.

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

Adapted from Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry. 2011 Apr;53(2):172-5. doi: 10.4103/0019-5545.82558. PMID: 21772657; PMCID: PMC3136027 .

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on 1 March 2019 by Shona McCombes . Revised on 10 October 2022 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the UK during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

Prevent plagiarism, run a free check.

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book proposal
• Applying for research grants

It’s easiest to write your abstract last, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information. If your abstract uses specialised terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyse,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

Next, summarise the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalisability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarise the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarises the contents of your paper.

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis or paper.

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved 8 July 2024, from https://www.scribbr.co.uk/thesis-dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, thesis & dissertation acknowledgements | tips & examples, dissertation title page.

• Resources Home 🏠
• Try SciSpace Copilot
• Search research papers
• Add Copilot Extension
• Try AI Detector
• Try Paraphraser
• Try Citation Generator
• April Papers
• June Papers
• July Papers

Abstract Writing: A Step-by-Step Guide With Tips & Examples

Table of Contents

Introduction

Abstracts of research papers have always played an essential role in describing your research concisely and clearly to researchers and editors of journals, enticing them to continue reading. However, with the widespread availability of scientific databases, the need to write a convincing abstract is more crucial now than during the time of paper-bound manuscripts.

Abstracts serve to "sell" your research and can be compared with your "executive outline" of a resume or, rather, a formal summary of the critical aspects of your work. Also, it can be the "gist" of your study. Since most educational research is done online, it's a sign that you have a shorter time for impressing your readers, and have more competition from other abstracts that are available to be read.

The APCI (Academic Publishing and Conferences International) articulates 12 issues or points considered during the final approval process for conferences & journals and emphasises the importance of writing an abstract that checks all these boxes (12 points). Since it's the only opportunity you have to captivate your readers, you must invest time and effort in creating an abstract that accurately reflects the critical points of your research.

With that in mind, let’s head over to understand and discover the core concept and guidelines to create a substantial abstract. Also, learn how to organise the ideas or plots into an effective abstract that will be awe-inspiring to the readers you want to reach.

What is Abstract? Definition and Overview

The word "Abstract' is derived from Latin abstractus meaning "drawn off." This etymological meaning also applies to art movements as well as music, like abstract expressionism. In this context, it refers to the revealing of the artist's intention.

Based on this, you can determine the meaning of an abstract: A condensed research summary. It must be self-contained and independent of the body of the research. However, it should outline the subject, the strategies used to study the problem, and the methods implemented to attain the outcomes. The specific elements of the study differ based on the area of study; however, together, it must be a succinct summary of the entire research paper.

Abstracts are typically written at the end of the paper, even though it serves as a prologue. In general, the abstract must be in a position to:

• Describe the paper.
• Identify the problem or the issue at hand.
• Explain to the reader the research process, the results you came up with, and what conclusion you've reached using these results.
• Include keywords to guide your strategy and the content.

Furthermore, the abstract you submit should not reflect upon any of  the following elements:

• Examine, analyse or defend the paper or your opinion.
• What you want to study, achieve or discover.
• Be redundant or irrelevant.

After reading an abstract, your audience should understand the reason - what the research was about in the first place, what the study has revealed and how it can be utilised or can be used to benefit others. You can understand the importance of abstract by knowing the fact that the abstract is the most frequently read portion of any research paper. In simpler terms, it should contain all the main points of the research paper.

What is the Purpose of an Abstract?

Abstracts are typically an essential requirement for research papers; however, it's not an obligation to preserve traditional reasons without any purpose. Abstracts allow readers to scan the text to determine whether it is relevant to their research or studies. The abstract allows other researchers to decide if your research paper can provide them with some additional information. A good abstract paves the interest of the audience to pore through your entire paper to find the content or context they're searching for.

Abstract writing is essential for indexing, as well. The Digital Repository of academic papers makes use of abstracts to index the entire content of academic research papers. Like meta descriptions in the regular Google outcomes, abstracts must include keywords that help researchers locate what they seek.

Types of Abstract

Informative and Descriptive are two kinds of abstracts often used in scientific writing.

A descriptive abstract gives readers an outline of the author's main points in their study. The reader can determine if they want to stick to the research work, based on their interest in the topic. An abstract that is descriptive is similar to the contents table of books, however, the format of an abstract depicts complete sentences encapsulated in one paragraph. It is unfortunate that the abstract can't be used as a substitute for reading a piece of writing because it's just an overview, which omits readers from getting an entire view. Also, it cannot be a way to fill in the gaps the reader may have after reading this kind of abstract since it does not contain crucial information needed to evaluate the article.

To conclude, a descriptive abstract is:

• A simple summary of the task, just summarises the work, but some researchers think it is much more of an outline
• Typically, the length is approximately 100 words. It is too short when compared to an informative abstract.
• A brief explanation but doesn't provide the reader with the complete information they need;
• An overview that omits conclusions and results

An informative abstract is a comprehensive outline of the research. There are times when people rely on the abstract as an information source. And the reason is why it is crucial to provide entire data of particular research. A well-written, informative abstract could be a good substitute for the remainder of the paper on its own.

A well-written abstract typically follows a particular style. The author begins by providing the identifying information, backed by citations and other identifiers of the papers. Then, the major elements are summarised to make the reader aware of the study. It is followed by the methodology and all-important findings from the study. The conclusion then presents study results and ends the abstract with a comprehensive summary.

In a nutshell, an informative abstract:

• Has a length that can vary, based on the subject, but is not longer than 300 words.
• Contains all the content-like methods and intentions
• Offers evidence and possible recommendations.

Informative Abstracts are more frequent than descriptive abstracts because of their extensive content and linkage to the topic specifically. You should select different types of abstracts to papers based on their length: informative abstracts for extended and more complex abstracts and descriptive ones for simpler and shorter research papers.

What are the Characteristics of a Good Abstract?

• A good abstract clearly defines the goals and purposes of the study.
• It should clearly describe the research methodology with a primary focus on data gathering, processing, and subsequent analysis.
• A good abstract should provide specific research findings.
• It presents the principal conclusions of the systematic study.
• It should be concise, clear, and relevant to the field of study.
• A well-designed abstract should be unifying and coherent.
• It is easy to grasp and free of technical jargon.
• It is written impartially and objectively.

What are the various sections of an ideal Abstract?

By now, you must have gained some concrete idea of the essential elements that your abstract needs to convey . Accordingly, the information is broken down into six key sections of the abstract, which include:

An Introduction or Background

Research methodology, objectives and goals, limitations.

Let's go over them in detail.

The introduction, also known as background, is the most concise part of your abstract. Ideally, it comprises a couple of sentences. Some researchers only write one sentence to introduce their abstract. The idea behind this is to guide readers through the key factors that led to your study.

It's understandable that this information might seem difficult to explain in a couple of sentences. For example, think about the following two questions like the background of your study:

• What is currently available about the subject with respect to the paper being discussed?
• What isn't understood about this issue? (This is the subject of your research)

While writing the abstract’s introduction, make sure that it is not lengthy. Because if it crosses the word limit, it may eat up the words meant to be used for providing other key information.

Research methodology is where you describe the theories and techniques you used in your research. It is recommended that you describe what you have done and the method you used to get your thorough investigation results. Certainly, it is the second-longest paragraph in the abstract.

In the research methodology section, it is essential to mention the kind of research you conducted; for instance, qualitative research or quantitative research (this will guide your research methodology too) . If you've conducted quantitative research, your abstract should contain information like the sample size, data collection method, sampling techniques, and duration of the study. Likewise, your abstract should reflect observational data, opinions, questionnaires (especially the non-numerical data) if you work on qualitative research.

The research objectives and goals speak about what you intend to accomplish with your research. The majority of research projects focus on the long-term effects of a project, and the goals focus on the immediate, short-term outcomes of the research. It is possible to summarise both in just multiple sentences.

In stating your objectives and goals, you give readers a picture of the scope of the study, its depth and the direction your research ultimately follows. Your readers can evaluate the results of your research against the goals and stated objectives to determine if you have achieved the goal of your research.

In the end, your readers are more attracted by the results you've obtained through your study. Therefore, you must take the time to explain each relevant result and explain how they impact your research. The results section exists as the longest in your abstract, and nothing should diminish its reach or quality.

One of the most important things you should adhere to is to spell out details and figures on the results of your research.

Instead of making a vague assertion such as, "We noticed that response rates varied greatly between respondents with high incomes and those with low incomes", Try these: "The response rate was higher for high-income respondents than those with lower incomes (59 30 percent vs. 30 percent in both cases; P<0.01)."

You're likely to encounter certain obstacles during your research. It could have been during data collection or even during conducting the sample . Whatever the issue, it's essential to inform your readers about them and their effects on the research.

Research limitations offer an opportunity to suggest further and deep research. If, for instance, you were forced to change for convenient sampling and snowball samples because of difficulties in reaching well-suited research participants, then you should mention this reason when you write your research abstract. In addition, a lack of prior studies on the subject could hinder your research.

Your conclusion should include the same number of sentences to wrap the abstract as the introduction. The majority of researchers offer an idea of the consequences of their research in this case.

Your conclusion should include three essential components:

• A significant take-home message.
• Corresponding important findings.
• The Interpretation.

Even though the conclusion of your abstract needs to be brief, it can have an enormous influence on the way that readers view your research. Therefore, make use of this section to reinforce the central message from your research. Be sure that your statements reflect the actual results and the methods you used to conduct your research.

Good Abstract Examples

Abstract example #1.

Children’s consumption behavior in response to food product placements in movies.

The abstract:

"Almost all research into the effects of brand placements on children has focused on the brand's attitudes or behavior intentions. Based on the significant differences between attitudes and behavioral intentions on one hand and actual behavior on the other hand, this study examines the impact of placements by brands on children's eating habits. Children aged 6-14 years old were shown an excerpt from the popular film Alvin and the Chipmunks and were shown places for the item Cheese Balls. Three different versions were developed with no placements, one with moderately frequent placements and the third with the highest frequency of placement. The results revealed that exposure to high-frequency places had a profound effect on snack consumption, however, there was no impact on consumer attitudes towards brands or products. The effects were not dependent on the age of the children. These findings are of major importance to researchers studying consumer behavior as well as nutrition experts as well as policy regulators."

Abstract Example #2

Social comparisons on social media: The impact of Facebook on young women’s body image concerns and mood. The abstract:

"The research conducted in this study investigated the effects of Facebook use on women's moods and body image if the effects are different from an internet-based fashion journal and if the appearance comparison tendencies moderate one or more of these effects. Participants who were female ( N = 112) were randomly allocated to spend 10 minutes exploring their Facebook account or a magazine's website or an appearance neutral control website prior to completing state assessments of body dissatisfaction, mood, and differences in appearance (weight-related and facial hair, face, and skin). Participants also completed a test of the tendency to compare appearances. The participants who used Facebook were reported to be more depressed than those who stayed on the control site. In addition, women who have the tendency to compare appearances reported more facial, hair and skin-related issues following Facebook exposure than when they were exposed to the control site. Due to its popularity it is imperative to conduct more research to understand the effect that Facebook affects the way people view themselves."

Abstract Example #3

The Relationship Between Cell Phone Use and Academic Performance in a Sample of U.S. College Students

"The cellphone is always present on campuses of colleges and is often utilised in situations in which learning takes place. The study examined the connection between the use of cell phones and the actual grades point average (GPA) after adjusting for predictors that are known to be a factor. In the end 536 students in the undergraduate program from 82 self-reported majors of an enormous, public institution were studied. Hierarchical analysis ( R 2 = .449) showed that use of mobile phones is significantly ( p < .001) and negative (b equal to -.164) connected to the actual college GPA, after taking into account factors such as demographics, self-efficacy in self-regulated learning, self-efficacy to improve academic performance, and the actual high school GPA that were all important predictors ( p < .05). Therefore, after adjusting for other known predictors increasing cell phone usage was associated with lower academic performance. While more research is required to determine the mechanisms behind these results, they suggest the need to educate teachers and students to the possible academic risks that are associated with high-frequency mobile phone usage."

Quick tips on writing a good abstract

There exists a common dilemma among early age researchers whether to write the abstract at first or last? However, it's recommended to compose your abstract when you've completed the research since you'll have all the information to give to your readers. You can, however, write a draft at the beginning of your research and add in any gaps later.

If you find abstract writing a herculean task, here are the few tips to help you with it:

1. Always develop a framework to support your abstract

Before writing, ensure you create a clear outline for your abstract. Divide it into sections and draw the primary and supporting elements in each one. You can include keywords and a few sentences that convey the essence of your message.

2. Review Other Abstracts

Abstracts are among the most frequently used research documents, and thousands of them were written in the past. Therefore, prior to writing yours, take a look at some examples from other abstracts. There are plenty of examples of abstracts for dissertations in the dissertation and thesis databases.

3. Avoid Jargon To the Maximum

When you write your abstract, focus on simplicity over formality. You should  write in simple language, and avoid excessive filler words or ambiguous sentences. Keep in mind that your abstract must be readable to those who aren't acquainted with your subject.

4. Focus on Your Research

It's a given fact that the abstract you write should be about your research and the findings you've made. It is not the right time to mention secondary and primary data sources unless it's absolutely required.

Conclusion: How to Structure an Interesting Abstract?

Abstracts are a short outline of your essay. However, it's among the most important, if not the most important. The process of writing an abstract is not straightforward. A few early-age researchers tend to begin by writing it, thinking they are doing it to "tease" the next step (the document itself). However, it is better to treat it as a spoiler.

The simple, concise style of the abstract lends itself to a well-written and well-investigated study. If your research paper doesn't provide definitive results, or the goal of your research is questioned, so will the abstract. Thus, only write your abstract after witnessing your findings and put your findings in the context of a larger scenario.

The process of writing an abstract can be daunting, but with these guidelines, you will succeed. The most efficient method of writing an excellent abstract is to centre the primary points of your abstract, including the research question and goals methods, as well as key results.

Interested in learning more about dedicated research solutions? Go to the SciSpace product page to find out how our suite of products can help you simplify your research workflows so you can focus on advancing science.

The best-in-class solution is equipped with features such as literature search and discovery, profile management, research writing and formatting, and so much more.

But before you go,

You might also like.

Consensus GPT vs. SciSpace GPT: Choose the Best GPT for Research

Literature Review and Theoretical Framework: Understanding the Differences

Types of Essays in Academic Writing - Quick Guide (2024)

What this handout is about

This handout provides definitions and examples of the two main types of abstracts: descriptive and informative. It also provides guidelines for constructing an abstract and general tips for you to keep in mind when drafting. Finally, it includes a few examples of abstracts broken down into their component parts.

What is an abstract?

An abstract is a self-contained, short, and powerful statement that describes a larger work. Components vary according to discipline. An abstract of a social science or scientific work may contain the scope, purpose, results, and contents of the work. An abstract of a humanities work may contain the thesis, background, and conclusion of the larger work. An abstract is not a review, nor does it evaluate the work being abstracted. While it contains key words found in the larger work, the abstract is an original document rather than an excerpted passage.

Why write an abstract?

You may write an abstract for various reasons. The two most important are selection and indexing. Abstracts allow readers who may be interested in a longer work to quickly decide whether it is worth their time to read it. Also, many online databases use abstracts to index larger works. Therefore, abstracts should contain keywords and phrases that allow for easy searching.

Say you are beginning a research project on how Brazilian newspapers helped Brazil’s ultra-liberal president Luiz Ignácio da Silva wrest power from the traditional, conservative power base. A good first place to start your research is to search Dissertation Abstracts International for all dissertations that deal with the interaction between newspapers and politics. “Newspapers and politics” returned 569 hits. A more selective search of “newspapers and Brazil” returned 22 hits. That is still a fair number of dissertations. Titles can sometimes help winnow the field, but many titles are not very descriptive. For example, one dissertation is titled “Rhetoric and Riot in Rio de Janeiro.” It is unclear from the title what this dissertation has to do with newspapers in Brazil. One option would be to download or order the entire dissertation on the chance that it might speak specifically to the topic. A better option is to read the abstract. In this case, the abstract reveals the main focus of the dissertation:

This dissertation examines the role of newspaper editors in the political turmoil and strife that characterized late First Empire Rio de Janeiro (1827-1831). Newspaper editors and their journals helped change the political culture of late First Empire Rio de Janeiro by involving the people in the discussion of state. This change in political culture is apparent in Emperor Pedro I’s gradual loss of control over the mechanisms of power. As the newspapers became more numerous and powerful, the Emperor lost his legitimacy in the eyes of the people. To explore the role of the newspapers in the political events of the late First Empire, this dissertation analyzes all available newspapers published in Rio de Janeiro from 1827 to 1831. Newspapers and their editors were leading forces in the effort to remove power from the hands of the ruling elite and place it under the control of the people. In the process, newspapers helped change how politics operated in the constitutional monarchy of Brazil.

From this abstract you now know that although the dissertation has nothing to do with modern Brazilian politics, it does cover the role of newspapers in changing traditional mechanisms of power. After reading the abstract, you can make an informed judgment about whether the dissertation would be worthwhile to read.

Besides selection, the other main purpose of the abstract is for indexing. Most article databases in the online catalog of the library enable you to search abstracts. This allows for quick retrieval by users and limits the extraneous items recalled by a “full-text” search. However, for an abstract to be useful in an online retrieval system, it must incorporate the key terms that a potential researcher would use to search. For example, if you search Dissertation Abstracts International using the keywords “France” “revolution” and “politics,” the search engine would search through all the abstracts in the database that included those three words. Without an abstract, the search engine would be forced to search titles, which, as we have seen, may not be fruitful, or else search the full text. It’s likely that a lot more than 60 dissertations have been written with those three words somewhere in the body of the entire work. By incorporating keywords into the abstract, the author emphasizes the central topics of the work and gives prospective readers enough information to make an informed judgment about the applicability of the work.

When do people write abstracts?

• when submitting articles to journals, especially online journals
• when applying for research grants
• when writing a book proposal
• when completing the Ph.D. dissertation or M.A. thesis
• when writing a proposal for a conference paper
• when writing a proposal for a book chapter

Most often, the author of the entire work (or prospective work) writes the abstract. However, there are professional abstracting services that hire writers to draft abstracts of other people’s work. In a work with multiple authors, the first author usually writes the abstract. Undergraduates are sometimes asked to draft abstracts of books/articles for classmates who have not read the larger work.

Types of abstracts

There are two types of abstracts: descriptive and informative. They have different aims, so as a consequence they have different components and styles. There is also a third type called critical, but it is rarely used. If you want to find out more about writing a critique or a review of a work, see the UNC Writing Center handout on writing a literature review . If you are unsure which type of abstract you should write, ask your instructor (if the abstract is for a class) or read other abstracts in your field or in the journal where you are submitting your article.

Descriptive abstracts

A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract describes the work being abstracted. Some people consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short—100 words or less.

Informative abstracts

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the writer presents and explains all the main arguments and the important results and evidence in the complete article/paper/book. An informative abstract includes the information that can be found in a descriptive abstract (purpose, methods, scope) but also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is rarely more than 10% of the length of the entire work. In the case of a longer work, it may be much less.

Here are examples of a descriptive and an informative abstract of this handout on abstracts . Descriptive abstract:

The two most common abstract types—descriptive and informative—are described and examples of each are provided.

Informative abstract:

Abstracts present the essential elements of a longer work in a short and powerful statement. The purpose of an abstract is to provide prospective readers the opportunity to judge the relevance of the longer work to their projects. Abstracts also include the key terms found in the longer work and the purpose and methods of the research. Authors abstract various longer works, including book proposals, dissertations, and online journal articles. There are two main types of abstracts: descriptive and informative. A descriptive abstract briefly describes the longer work, while an informative abstract presents all the main arguments and important results. This handout provides examples of various types of abstracts and instructions on how to construct one.

Which type should I use?

Your best bet in this case is to ask your instructor or refer to the instructions provided by the publisher. You can also make a guess based on the length allowed; i.e., 100-120 words = descriptive; 250+ words = informative.

How do I write an abstract?

The format of your abstract will depend on the work being abstracted. An abstract of a scientific research paper will contain elements not found in an abstract of a literature article, and vice versa. However, all abstracts share several mandatory components, and there are also some optional parts that you can decide to include or not. When preparing to draft your abstract, keep the following key process elements in mind:

• Reason for writing: What is the importance of the research? Why would a reader be interested in the larger work?
• Problem: What problem does this work attempt to solve? What is the scope of the project? What is the main argument/thesis/claim?
• Methodology: An abstract of a scientific work may include specific models or approaches used in the larger study. Other abstracts may describe the types of evidence used in the research.
• Results: Again, an abstract of a scientific work may include specific data that indicates the results of the project. Other abstracts may discuss the findings in a more general way.
• Implications: What changes should be implemented as a result of the findings of the work? How does this work add to the body of knowledge on the topic?

(This list of elements is adapted with permission from Philip Koopman, “How to Write an Abstract.” )

All abstracts include:

• A full citation of the source, preceding the abstract.
• The most important information first.
• The same type and style of language found in the original, including technical language.
• Key words and phrases that quickly identify the content and focus of the work.
• Clear, concise, and powerful language.

Abstracts may include:

• The thesis of the work, usually in the first sentence.
• Background information that places the work in the larger body of literature.
• The same chronological structure as the original work.

How not to write an abstract:

• Do not refer extensively to other works.
• Do not add information not contained in the original work.
• Do not define terms.

If you are abstracting your own writing

When abstracting your own work, it may be difficult to condense a piece of writing that you have agonized over for weeks (or months, or even years) into a 250-word statement. There are some tricks that you could use to make it easier, however.

Reverse outlining:

This technique is commonly used when you are having trouble organizing your own writing. The process involves writing down the main idea of each paragraph on a separate piece of paper– see our short video . For the purposes of writing an abstract, try grouping the main ideas of each section of the paper into a single sentence. Practice grouping ideas using webbing or color coding .

For a scientific paper, you may have sections titled Purpose, Methods, Results, and Discussion. Each one of these sections will be longer than one paragraph, but each is grouped around a central idea. Use reverse outlining to discover the central idea in each section and then distill these ideas into one statement.

Cut and paste:

To create a first draft of an abstract of your own work, you can read through the entire paper and cut and paste sentences that capture key passages. This technique is useful for social science research with findings that cannot be encapsulated by neat numbers or concrete results. A well-written humanities draft will have a clear and direct thesis statement and informative topic sentences for paragraphs or sections. Isolate these sentences in a separate document and work on revising them into a unified paragraph.

If you are abstracting someone else’s writing

When abstracting something you have not written, you cannot summarize key ideas just by cutting and pasting. Instead, you must determine what a prospective reader would want to know about the work. There are a few techniques that will help you in this process:

Identify key terms:

Search through the entire document for key terms that identify the purpose, scope, and methods of the work. Pay close attention to the Introduction (or Purpose) and the Conclusion (or Discussion). These sections should contain all the main ideas and key terms in the paper. When writing the abstract, be sure to incorporate the key terms.

Highlight key phrases and sentences:

Instead of cutting and pasting the actual words, try highlighting sentences or phrases that appear to be central to the work. Then, in a separate document, rewrite the sentences and phrases in your own words.

Don’t look back:

After reading the entire work, put it aside and write a paragraph about the work without referring to it. In the first draft, you may not remember all the key terms or the results, but you will remember what the main point of the work was. Remember not to include any information you did not get from the work being abstracted.

Revise, revise, revise

No matter what type of abstract you are writing, or whether you are abstracting your own work or someone else’s, the most important step in writing an abstract is to revise early and often. When revising, delete all extraneous words and incorporate meaningful and powerful words. The idea is to be as clear and complete as possible in the shortest possible amount of space. The Word Count feature of Microsoft Word can help you keep track of how long your abstract is and help you hit your target length.

Example 1: Humanities abstract

Kenneth Tait Andrews, “‘Freedom is a constant struggle’: The dynamics and consequences of the Mississippi Civil Rights Movement, 1960-1984” Ph.D. State University of New York at Stony Brook, 1997 DAI-A 59/02, p. 620, Aug 1998

This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so. The time period studied includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies. Data have been collected from archives, interviews, newspapers, and published reports. This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Now let’s break down this abstract into its component parts to see how the author has distilled his entire dissertation into a ~200 word abstract.

What the dissertation does This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so.

How the dissertation does it The time period studied in this dissertation includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies.

What materials are used Data have been collected from archives, interviews, newspapers, and published reports.

Conclusion This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to movement demands and the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Keywords social movements Civil Rights Movement Mississippi voting rights desegregation

Example 2: Science Abstract

Luis Lehner, “Gravitational radiation from black hole spacetimes” Ph.D. University of Pittsburgh, 1998 DAI-B 59/06, p. 2797, Dec 1998

The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search for and analysis of detected signals. The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm. This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

This science abstract covers much of the same ground as the humanities one, but it asks slightly different questions.

Why do this study The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search and analysis of the detected signals.

What the study does The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm.

Results This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

Keywords gravitational radiation (GR) spacetimes black holes

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Belcher, Wendy Laura. 2009. Writing Your Journal Article in Twelve Weeks: A Guide to Academic Publishing Success. Thousand Oaks, CA: Sage Press.

Koopman, Philip. 1997. “How to Write an Abstract.” Carnegie Mellon University. October 1997. http://users.ece.cmu.edu/~koopman/essays/abstract.html .

Lancaster, F.W. 2003. Indexing And Abstracting in Theory and Practice , 3rd ed. London: Facet Publishing.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

• HOW WE WORK
• THESIS WRITING
• DISSERTATION PROCESS

Steps Guide to Create Dissertation Abstract With Examples

Home >> Blog >> Steps Guide to Create Dissertation Abstract With Examples

An abstract summarizes your entire dissertation, typically ranging from 200-350 words. It should provide a clear overview of your project and highlight the main points of your argument. To write an effective abstract, you'll need to be concise and organized while still presenting your ideas clearly and coherently.

If you're a student working on a dissertation, you know that writing the abstract can be one of the most challenging parts. But don't worry, we're here to help!

In this blog post, we'll give you a step-by-step guide to creating your dissertation abstract and some examples to help you get started. So read on and start writing an abstract that will make your professors proud!

What is a Dissertation Abstract?

How to write a good dissertation abstract, dissertation abstract example, tips to write a strong dissertation abstract.

‘What is abstract in dissertation writing?’

The abstract is designed to quickly summarize your dissertation in an engaging way. It aims to show readers what they can expect from reading it more thoroughly later on. It is an important part of dissertation writing and must be written carefully.

The abstract is a short and concise way of getting your research paper's message across. It should summarize the entire work in one paragraph, so it can be easily understood by readers who are not familiar with what it is about!

It should be included before the table of contents and after the title page and acknowledgments.

‘What should dissertation abstract include?’

Ideally, a dissertation or thesis abstract should include the following things;

• The study's and research's goal.
• Your dissertation's research methods.
• The key findings and results.
• The implications of the obtained results.

A good abstract discusses all these points. It is written in the present simple tense.

What is the Main Purpose of an Abstract?

The first purpose of an abstract is to capture the attention of potential readers before they read the rest of your work. It should specifically communicate what you were attempting to discover and how this research was conducted so that anyone interested can decide whether or not they want more information on that topic.

The abstract provides brief background information and introduces your work to the readers. It helps readers in deciding whether or not to continue reading your work. It should be included in all research projects and case studies, just like a literature review.

Dissertation Abstract Structure

Here are the sections that must be included in a dissertation abstract format.

• Introduction
• Aims and objectives
• Results and discussion

Dissertation Abstract Length

It varies depending on which college/university you attend. Some universities require that you summarize your study in one paragraph, while others ask for about 300-500 words.

Dissertation abstract word count varies based on different colleges’ policies, so be sure to check yours before writing it.

(back to top)

Here are the easy steps to write a good dissertation abstract.

• 1. Explain the Research Purpose

Explain everything briefly and describe the significance of your research work. State the purpose and significance of your research and what the reader can learn from reading your paper.

The following are the components of an abstract:

• Your research objectives and questions.
• The significance of these research questions.

You must make this section extremely clear to capture your reader's attention and interest. This is where you'll "hook" them with a compelling introduction that will capture their attention in reading more about the project.

They might lose patience if we don't put in the effort from start to finish.

• 2. Describe Research Methodology

Describe how you responded to the research questions. This means that you will present the methodology and design of your research in this paragraph. It could be qualitative or quantitative in nature. Mention it whatever it is for your reader.

However, keep it brief and avoid providing all of the details here.

• 3. State Research’s Main Findings

This section contains the most important findings from your research. It should be concise and clear to readers about what you discovered, without padding it with unnecessary information or repeating things that have already been covered.

Remember to be concise and clear when summarizing the most important aspects of your study, namely answers to its original questions.

• 4. Discuss the Research Implications

Have you ever found yourself struggling to grasp the big picture while reading a lengthy paper? That is why we have implications. It explains what those numbers and findings mean in our daily lives as citizens and readers.

The following are the topics that should be discussed here.

• The significance of your research.
• The significance and impact of your research findings.
• Future research possibilities

Ensure that these elements are included in your abstract.

Here is a dissertation abstract sample PDF for your better understanding.

Thesis Introduction Chapter Sample

Here are the tips for writing a good and engaging abstract for your dissertation.

• Recognize the purpose of writing an abstract.
• Create an abstract after writing the entire dissertation.
• Explain each chapter in one to two lines before writing the abstract.
• Examine some abstract examples to gain a better understanding of them.
• Write clearly and avoid using overly complicated language.
• Concentrate on your personal research.
• Make an effort to keep everything concise and to the point.
• Keep the details for the main sections and don't include everything here.
• When you have finished writing your thesis abstract, it is time to read it and remove any errors thoroughly.

You can save time and effort by using these simple tips to write your dissertation abstract correctly. If you still require assistance, contact us at GradSchoolGenius for help! We are professionals who want nothing more than the best possible outcomes for students; they’ll be happy to assist with anything to get you a perfect paper.

Frequently Asked Questions

What is the difference between an abstract and an introduction.

An abstract is less than a page long, whereas an introduction is much longer. The introduction chapter is quite detailed, as it introduces the readers to each important and interesting detail. An abstract is unique in that it is used to capture the reader's interest.

How long should an abstract be for a 10000 word dissertation?

If you are writing a 10000-word dissertation, abstracts are typically about 300-350 words long. This is because it contains all the information necessary to understand what your paper is about.

What are the 5 parts of an abstract?

Here are 5 parts of an abstract:

• Research significance
• Methodology

Similar Blogs

• Dissertation Introduction
• Dissertation Topics
• Thesis Introduction
• Thesis Topics
• Thesis Format

GradSchoolGenius is a top-ranked academic writing service. We are home to high-quality academic thesis and dissertations for graduate and post-graduate students worldwide.

• 100% Plagiarism-free Work
• 100% Deadline Driven
• 100% Confidentiality
• 100% Money-back Guarantee
• 15+ Years of Experience
• 500+ Happy Clients
• 500+ Projects Completed
• 24/7 Customer Support

• How to Write an Abstract for a Dissertation

Written by Hannah Slack

Every PhD student will have to write an abstract. Whether it’s for a conference paper , journal article or your thesis , the abstract is an important part for many academic activities. Although only a single short paragraph, writing one effectively takes practice.

This page will take you through what a dissertation abstract is, why it’s so important and how to write one.

What is an academic abstract?

An academic abstract is a short and concise summary of research . It should cover the aim or research question of your work, your methodology, results and the wider implications of your conclusions. All this needs to be covered in around 200-300 words .

One of the common mistakes people make when writing abstracts is not understanding their purpose. An abstract is not for the author, it’s for the reader . To summarise your research, as the person who knows it best, may seem easy. But to be able to communicate the complexities and importance of your work to someone else, likely outside of your field, can be difficult.

When will I need to write an academic abstract?

There are many different places that you’ll find abstracts. Some of the most common ones include:

• Grant and funding applications
• Journal articles
• Conference applications
• Conference proceedings

This guide primarily focuses on the dissertation abstract, which is the most common form of this kind of text.

What’s the difference between an abstract and an introduction?

The main differences between a PhD dissertation abstract and an introduction are the purpose and the length. An abstract is a short, paragraph-sized summary of the whole thesis, covering context, your research and results. Whereas an introduction should be much longer and only cover the context of your work. An introduction is designed to explain the background of your work and so will take up at least an entire page.

Why are abstracts important?

Abstracts are important because they are a quick and easy way to communicate your work. In many ways, academic abstracts are a promotional tool and so should be considered carefully.

For your thesis, it’s the first thing your examiners will read, forming their expectations for the rest of the dissertation.

In journal articles, their purpose is to convince the reader that they should read your article. If you’re applying for a conference, the abstract gives the organiser a taster of your paper so they can decide whether it’s suitable.

Effectively, your abstract is the first impression someone gets of your research and so it’s important to put your best foot forward.

How to write a PhD abstract

How you write a dissertation abstract will largely depend on what it’s for. For a PhD dissertation or journal article, you should have already written up the research which the abstract will summarise. You should focus on making sure your summary is an honest representation of the larger written work. However, for a conference application it’s likely you won’t yet have written the paper. In this instance, the abstract might focus more on the broader themes you intend to comment on and your methodology.

Whatever the intended purpose, all abstracts should broadly follow the same structure. To help you, we’ve put together a template to make sure you include all the important points.

PhD abstract format

Because a lot of information needs to be packed into a short paragraph, an abstract is easier to write when you break it down into the key elements. For a first draft, spend a few minutes on each of the six steps, only writing down one or two sentences.

• Rationale – Ask yourself why you are researching the topic and what is the context for your work. Here you should communicate the purpose of your study within the wider field.
• Research question – Now you should specify what the exact goal of this piece of research is. What question are you providing the answer for?
• Evidence and methods – After discussing the broader purpose of your work you now need to let the reader know what you have actually done. Try to summarise your methods and evidence with a few keywords to keep if brief. Some examples include qualitative, quantitative, archival or experimental.
• Results – Here, you should summarise your outcomes and highlight what is new or significant about your findings.
• Conclusion – The conclusion should relate back to your rationale and research question. Ask yourself, ‘what do the results mean?’
• Implications and applications – Lastly, the reader needs to know why your results are important to the field. You need to specify what is significant about this work and how it can be useful.

Once you have your framework it can be edited for a more natural flow. You may find that some points naturally merge into one sentence and others need some elaboration. But remember, the abstract must be short and concise so don’t be tempted to extend areas unnecessarily. Once you have a draft that you are happy with, consider asking for feedback from other PhD students or your supervisor.

Doing a PhD

For more information on trhe different stages of a doctorate, check out our guide to the PhD journey .

Ready to do a PhD?

Search our project listings to find out what you could be studying.

Want More Updates & Advice?

What happens during a typical PhD, and when? We've summarised the main milestones of a doctoral research journey.

The PhD thesis is the most important part of a doctoral degree. This page will introduce you to what you need to know about the PhD dissertation.

This page will give you an idea of what to expect from your routine as a PhD student, explaining how your daily life will look at you progress through a doctoral degree.

Our guide tells you everything about the application process for studying a PhD in the USA.

Is your supervisor moving universities? Or have you discovered another doctoral programme that better suits your goals? In this guide we take a look at how you can transfer a PhD to another university.

Ever wondered how hard is a PhD? Our guide can help you learn the level of a PhD compared to Masters study, what hurdles make a PhD hard, and why they occur.

FindAPhD. Copyright 2005-2024 All rights reserved.

Unknown    ( change )

Have you got time to answer some quick questions about PhD study?

Select your nearest city

You haven’t completed your profile yet. To get the most out of FindAPhD, finish your profile and receive these benefits:

• Monthly chance to win one of ten £10 Amazon vouchers ; winners will be notified every month.*
• The latest PhD projects delivered straight to your inbox
• Access to our £6,000 scholarship competition
• Weekly newsletter with funding opportunities, research proposal tips and much more
• Early access to our physical and virtual postgraduate study fairs

Or begin browsing FindAPhD.com

or begin browsing FindAPhD.com

*Offer only available for the duration of your active subscription, and subject to change. You MUST claim your prize within 72 hours, if not we will redraw.

Do you want hassle-free information and advice?

Create your FindAPhD account and sign up to our newsletter:

• Find out about funding opportunities and application tips
• Receive weekly advice, student stories and the latest PhD news
• Hear about our upcoming study fairs
• Save your favourite projects, track enquiries and get personalised subject updates

Create your account

Looking to list your PhD opportunities? Log in here .

How to Write an Abstract for a Dissertation

At roughly 200 words, the abstract is the shortest part of the dissertation! Thankfully, it’s also one of the simplest to write – as long as you approach it sensibly…

The cardinal rule for writing an abstract is to leave it ‘til last. After all, the abstract is a summary of the entire dissertation, so it makes sense to leave it until the end.

Having said that, it’s a good idea to prepare yourself. If you learn how to write an abstract well ahead of time, there’ll be no last-minute panics. With that in mind, let’s run through the basics of writing a dissertation abstract.

What is the purpose of an abstract?

As mentioned, the abstract is essentially a summary of your dissertation. Think of it like a film synopsis or a book blurb. In roughly 200 words, it should tell the reader exactly what to expect from reading your dissertation.

A good abstract will also hint at the relevance and usefulness of the project. Indeed, in many ways, the abstract is an opportunity for you to ‘sell’ your project to the reader. The more compelling the abstract is, the more likely they are to read your dissertation.

What should an abstract include?

Later on, we’ll show you exactly how to structure an abstract. But first, it’s important to understand the elements of an abstract. In brief, an abstract should:

• Intrigue – In the first few sentences, you should introduce your topic to the reader, and highlight a key debate or issue that inspired the dissertation. If you can intrigue your reader in the opening sentence, they’re much more likely to continue reading!
• Convince – You’ll then need to convince your reader that your dissertation is necessary and worthwhile. Often, this is achieved by explaining how your dissertation extends or challenges the existing literature.
• Describe – You should describe the research methods very briefly but accurately.
• Inform – The abstract should be informative, particularly in relation to the findings of the study. It is not necessary to state all the findings, but you should highlight the key insights.
• Demonstrate relevance and usefulness – As mentioned, a good abstract finishes by saying who will find this research useful and why. Occasionally, it may also suggest directions for future research.

Remember, since the abstract is a summary of a project you’ve completed, it should be written in the present or past simple tense .

How should you structure an abstract?

The structure of an abstract can vary depending on the subject you are studying at university. Also, some universities have specific guidelines for writing an abstract, so always check with your tutor first. In particular, APA style has quite specific rules for formatting an abstract.

Though, generally speaking, the following structure is a good starting point for students in most subject areas:

1. Provide some background

The first 1-2 sentences should provide a very brief background to your topic of study. Remember, the aim is to intrigue here. These sentences are usually written in the present tense.

2. Refer to existing debates

Next, you should briefly explain the existing theory/research that has informed your chosen topic. If there are any key debates relevant to your topic, briefly mention them here. Try to limit this to 1-2 sentences and stick with the present or past tense.

3. Explain why the dissertation was worthwhile

In the next sentence or two, you’ll need to convince your reader that this study was worthwhile. Try to use the previous few sentences as a springboard, but explain why your study was unique.

4. State your research question

If it was not stated in the last section, the next sentence should clearly state your research question. You may have had more than one research question/research aim, but try to be as succinct as possible here.

5. State the methodology

In this sentence, you should clearly describe the methodology used . There is no need to explain why this method was chosen; just be as precise and succinct as possible.

6. State the key findings

The next sentence should explain the findings of your dissertation. Try not to be too technical here as your reader may be a novice. Also, there probably won’t be space to state all your findings, so present the ones that are most relevant and interesting. In fact, leaving a bit to the imagination is a good thing because it should intrigue the reader…

7. State who will find this research useful and why

In the last sentence, you should explain the usefulness and relevance of your dissertation. Consider: Who will benefit from this research? Does it have any practical applications?

8. List of keywords

Depending on your subject, you may be expected to provide a short list of keywords. This is common in Psychology research, for example. Check with your tutor if keywords are necessary. Remember, these should be listed in alphabetical order underneath the body of the abstract.

What’s the secret to writing a great abstract?

So, we’ve covered the basics of writing an abstract, but how can you write a first-class dissertation abstract? Well, we have two pieces of advice.

Firstly, be precise and succinct. Once you’ve written your abstract, you should set it aside for at least 24 hours, and then return to it with fresh eyes. As you read through it, cut out anything that’s not absolutely essential. Also, consider rewording sentences so that they are clear and readable. You can use our disseration writing services to help you with this.

Secondly, when you reveal your findings, try to find the right balance between revealing too much and revealing too little. It’s important to demonstrate that your study was interesting and relevant, but if you reveal too much, the reader may not want to bother reading your dissertation.

Indeed, writing a good dissertation is all about taking your reader on a journey and building momentum as you go. If you can manage this, you’ll keep your reader’s attention until the very last page! Creating this balance is not easy but it is a skill that can be developed through practice.

Common mistakes to avoid

So, we’ve reviewed the components of a good dissertation abstract. But what constitutes a bad abstract? Let’s finish by exploring some of the common mistakes students make when writing an abstract:

• Too long – Generally speaking, an abstract should be between 150 and 250 words, and it should fit on one page. If you make it too long, it won’t be compelling, and it’ll probably just confuse the reader.
• Lack of relevant keywords in the body of the abstract – Although an abstract should be written in reasonably non-technical language, it should include some relevant keywords. E.g. In the above example “Green marketing” and “Green purchasing behaviour” were pertinent keywords. Using appropriate keywords shows you’ve done wider reading and you understand where your project ‘fits in’ to the literature. Also, if your research were to be published, keywords would help other researchers to find it.
• Written in the wrong tense – A common mistake students make is that they write their abstract in the future tense (I.e. “This dissertation will explore the relationship between…”). The research has already been conducted, so it should be written in the past tense.
• Wrong positioning – The abstract should go after the title page and before the contents page.
• References and quotes – Generally speaking, an abstract should not contain references or quotations from other theorists. The only exception might be if your dissertation was solely focused on one particular theory/debate. In that case, keep quotes and references to an absolute minimum – your introduction and literature review will provide a comprehensive description of the theory!

You may also like

• How it works

How to Write an Abstract for a Dissertation

Published by Owen Ingram at August 11th, 2021 , Revised On September 20, 2023

Dissertation Abstract – Definition

The abstract is regarded as the foremost component of a dissertation. It will be your first chance to set precise expectations for the supervisor, examiner or graduate committee members. An abstract for a dissertation is the first real significant narrative of your work and is placed at the beginning of the dissertation paper.

Presented in a shortened form, an abstract is a very brief overview of your research .

In this article, we will uncover every piece of information you need to know to write an abstract.  

According to the online archives of Simon Fraser University research database, “an abstract is not merely an introduction in the sense of a preface, preamble, or advance organizer that prepares the reader for the thesis. In addition to that function, it must be capable of substituting for the whole thesis when there are insufficient time and space for the full text. ”

Do I Need to Write an Abstract?

You will be required to include an abstract at the beginning of your paper if you are working on your thesis, dissertation, research paper, or publishing a paper in any academic journal.

Even though the abstract appears right at the start of a dissertation paper, it is generally written at last. For it is only after you have compiled all the evidence and data, interpreted every piece of finding, backed your interpretation(s) with enough theoretical evidence and answered your research questions, that you can sum it all up in 150-200 words. The general length of an abstract.

 The table of contents is the section that immediately follows an abstract. Here is a guide on how to create a table of contents for the dissertation .

Your abstract should be an  entirely autonomous and independent text and never be an extract taken from within the paper’s original content. This also implies, indirectly, that it is unethical in research contexts to copy-paste chunks from within your own research in an abstract.

In particular, an abstract aims to provide an overview of research aim and objectives, methods of research employed, results obtained, findings, most salient interpretation(s), the conclusion and implication(s) of your research. Readers should be able to completely understand all aspects of your research work just by reading your abstract.

Also Read : How to Write Dissertation Discussion Chapter , How to Write a Remarkable Dissertation?

Stuck on a difficult dissertation? We can help!

Our Essay Writing Service Features:

• Expert UK Writers
• Plagiarism-free
• Timely Delivery
• Thorough Research
• Rigorous Quality Control

Now you can pay in up to 4 installments

How to Write a Dissertation Abstract

A dissertation abstract serves as a deal maker or breaker when it comes to making a strong impression on your readers. Your dissertation abstract can either motivate your readers to continue reading or discourage them from  moving on to the next chapters .

The abstract of a dissertation needs to be conspicuous, meaningful, interesting and of course, informative. It should contain brief but relevant information from all chapters of your dissertation to provide a brief overview of the research that has been conducted. This would mean its:

• What (topic statement of your research)
• Who (the sample)
• Why (the significance/objectives/aims/questions/hypothesis of your research)
• Where (the background/setting of your research)
• And how (the research design/tools/methods/methodologies etc. of your research)

 Here, we have put together some guidelines for students to understand how to write an abstract for a dissertation to make a great first impression on readers.

Key Components of a Dissertation Abstract

The  key elements of a dissertation abstract are as follows:

• Background statement/problem statement/thesis statement
• Information regarding research sample
• Methods of research employed
• A brief description of the results obtained and their interpretation (only the most important one(s))
• A summary of conclusion, limitations and future recommendations/implications (only the most salient ones)

1. Background/Problem Statement/Aims and Objectives

The first couple of sentences of your dissertation abstract should provide a summary of the purpose of your research. This can be expressed as follows:

• Background statement – Provide a brief perspective on the theoretical and practical significance of your work.
• The problem statement clearly communicates to the readers why there was a need to research the chosen topic.
• Present an overview of the research’s aim and objectives to establish what your research intended to achieve.
• Thesis statement – what is the main idea of your dissertation paper? What are your claims in reference to the established research questions?

Avoid writing this part of the abstract in future tense because it refers to concluded actions.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Also read: How to Get Dissertation Deadline Extension – Some Practical Methods.

This one-to-two lined section will give information about who the sample in your study was; where they are located/residing, etc. The reasons for selecting that group of participants, for instance, is not relevant for mention in an abstract.

3. Research Methods

Briefly specify your  dissertation research methodology immediately after stating the purpose and sample of your dissertation paper. Here, you will be expected to summarise how you straightforwardly conducted your research.

Like the first section, a description of research  methods should also be written in the simple past tense. There is absolutely  no need to highlight the limitations and/or validity  of your research methods here.

The goal is to take the readers through the overall approach and process quickly.

4. Research Findings

Provide a brief overview of the major  findings of your dissertation study . If you think you undiscovered multiple major findings, only mention the ones that directly answer a research question or two that was/were part of your study to begin with. For instance, if you studied the relation between two variables and your findings indicate it’s a positive correlation, you simply state that finding, not the other, minor ones related to this specific one.

This section is the crux of your abstract, so make sure you demonstrate how your research addressed the research objectives.

Furthermore, due to the word limit (150-200) of the abstract and the complexity of your research, you might not be able to include all results here. If that is the case, have only the most significant results.

This portion should be written in the past simple or present tense. Here is an example:

• Analysis of the responses has shown that there is a strong correlation between consumption and productivity.
• Analysis of the responses shows there is a strong correlation between coffee consumption and productivity.
• Analysis of the responses showed there was a strong correlation between coffee consumption and productivity.

5. Conclusion and Recommendation/Implication

Lastly, the  abstract of a dissertation  should  conclude your dissertation research . The conclusion should clearly report how your study addressed the research problem.

Use this part of the abstract to convince people how your research proved the argument or theory your research was built on and started off with.

Provide recommendations for practical implementation to clearly understand your audience how your work will solve the problem at hand.

Finally, do not forget to mention important research limitations briefly. For example, selecting a smaller sample size due to some constraints would be a limitation worth mentioning. This will add more weight and credibility to your research.

Make use of the present simple test when writing the conclusion.

Some institutions, however, dictate that you write one or two lines about the long- or short-term implications your research might have. This component would be the last one in an abstract, preceded by the conclusive statement.

Abstract keywords/phrases 

You might be asked to include important key terms and phrases at the end of the abstract, especially if your paper has been selected for publication in an academic journal.

These keywords help potential readers find your paper in search engines during their  desk-based research .

However, it should be noted that some academic journals have their own specific formatting requirements for keywords. It’s recommended that you read the requirements about keywords in their publication manuals to avoid any misunderstanding.

More on Abstract keywords

According to Hartley and Kostoff (2003), following are some different methods for supplying keywords for an abstract:

Researchers “supply them with no restrictions on the numbers allowed; supply up to a fixed number (e.g. six); supply key words as appropriate from a specified list; editors supplement/amend authors’ key words; editors supply key words; editors supply key words from a specified list; referees supply key words from a specified list; keywords are allocated according to the ‘house-rules’ applied to all journals; distributed by a specific publisher; keywords are determined by computer program at proof stage”.

Format of a Dissertation Abstract

The typical size of an abstract for a masters’ dissertation is 300-400 words whereas abstracts for undergraduate dissertation papers are 150-200 words in size.

Since their findings are generally more in number, abstracts for PhD-level dissertation papers are assigned 300-350 words. The dissertation abstract structure should be such that there are one or two sentences assigned to each chapter of the dissertation.

For example, if your dissertation paper has 5 chapters, there should be a minimum of 8-10 sentences in the abstract to provide a reflective summary of each chapter’s information.

As is the case  with the dissertation introduction chapter , you will be expected to specify the research questions clearly.

You might need to rearrange them and/or reduce the word count without missing out on any important element, considering there is room for only two to three research questions generally placed at the beginning of the abstract.

  Poor dissertation abstracts don’t present the findings of the research. It is important to recognize that the readers of your dissertation paper will be more interested in what findings you came up with as a result of your research and not merely what you did. Use at least 2 to 3 sentences for summarising the results and their interpretation.

Look for the formatting requirements in your dissertation handbook or writing guidelines provided by your school. Make sure to stay within the permissible word limit.  An abstract too long or too short will not serve the purpose.

Tips on How to Write the Abstract for Dissertation

Condensing your entire dissertation into just a few sentences can be a daunting task, especially if it’s your first time writing a dissertation abstract.

It is important to get your dissertation abstract right because this part of the dissertation paper is the first real piece of written description that your audience will read. You can even recall some of your own experiences where, due to shortage of time or many deadlines looming above your head, you had to skim and scam the abstract of a research article or journal paper you stumbled across. It probably gave you a good enough idea whether it was worth it to bookmark that paper to read fully later now, didn’t it?

That’s exactly the kind of effect your own abstract should have on its readers, too. It’s meant to give a holistic view of the entire research.

Here are some tips for you to make sure you write this part to the highest possible academic quality:

Also Read: Different Research Methods for Dissertation?

Tip #1: Avoid Citing Publications

Student researchers often get carried away with the research of professional researchers when writing an abstract. Avoid focusing on others’ work and demonstrate how your own research will substantially contribute to your area of study.

Depending on the allowable word limit for the abstract, you might be able to squeeze in a sentence or two about the scholarly background of the research problem you wish to address. Still, there is no need to cite any publications.

Tip #2: Be Concise and to-the-point

Your dissertation abstract should be attention-grabbing, even though you will have only a few hundred words to work with. So. it is crucial to communicate your research work in the most concise manner.  Never stuff your dissertation abstract with needless words and avoid vague verbiage that might put your readers off-track.

 Need help with writing a killer dissertation abstract? Our writers can write an abstract for a dissertation following your school’s guidelines. Or get help from our expert academics  with any part of your dissertation.

Tip # 3: Read Sample Abstracts

Learn the art of writing great dissertation abstract by reading abstract dissertation samples. It would make sense to look at how other people in your academic subject have written their abstracts.

If you have already conducted your  dissertation literature review , you might have already read many research paper abstracts – which you could use to get useful insights into how to format your dissertation abstract. Here is an abstract dissertation example to help you get started.

Tip #4: Coverage and Presentation

Remember, an abstract is one single paragraph. There are no breaks in it. It continues as a single body. Furthermore, it is written in a separate page. No other chapter or sub-headings etc. come before or after the abstract on the same page. There are also no headings – such as the topic of your research – above the title ‘Abstract’ on the abstract page. Simply give the heading of ‘Abstract’ and start it off from there. And last but not the least, another important thing to keep in mind is that abstract (pretty much like the rest of your thesis) will be double-spaced.

Tip #5: Language

Other researchers will look for key terms specific to your research field to figure out the purpose and nature of your dissertation paper. Make sure to include relevant terminology necessary for understanding your abstract and thereby determining what the research was about.

Tip #6: Shortening a Lengthy Abstract

It’s natural to sometimes get carried away while writing…even in academic writing. As Trochim and other writers state in their book, Research Methods: The Essential Knowledge Base , “In order to shorten your abstract, you should eliminate nonessential information wherever possible—this includes transitions phrases (e.g., ‘the results demonstrate . . .’).”

Can I use an excerpt from the paper as an abstract?

No, you should not. It is important for an abstract to be an entirely autonomous and independent text and never be an extract taken from within the paper’s original content. Write it in your own words, 

What is the purpose of an abstract?

The abstract of your dissertation provides a brief overview of the research conducted and the results obtained.

What should a dissertation abstract contain?

The abstract of your dissertation must give background information, mention the problem statement , research aims , and objectives, sample information, methods of research , the findings , conclusion and recommendations/implications.

Can I cite a reference in the abstract?

No, you must never cite any reference in the abstract.

You May Also Like

Here are the steps to make a theoretical framework for dissertation. You can define, discuss and evaluate theories relevant to the research problem.

Have you failed dissertation, assignment, exam or coursework? Don’t panic because you are not alone. Get help from our professional UK qualified writers!

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

Want to Get your Dissertation Accepted?

Discover how we've helped doctoral students complete their dissertations and advance their academic careers!

Join 200+ Graduated Students

Get Your Dissertation Accepted On Your Next Submission

Get customized coaching for:.

• Crafting your proposal,
• Collecting and analyzing your data, or
• Preparing your defense.

Trapped in dissertation revisions?

How to write a dissertation abstract, published by steve tippins on may 25, 2020 may 25, 2020.

Last Updated on: 3rd June 2022, 04:27 am

The abstract is where you “sell” your dissertation. In over 95% of the cases, the first thing people see will be your dissertation’s abstract. If others (such as potential employers or fellow researchers) are going to be looking at your dissertation, you have to get their interest in the abstract. 

How do you get people’s interest? Think about what you wanted to know when you were searching, and that’s what needs to be in the abstract (in addition to anything that your school requires). 

Normally dissertation abstracts are a page or less. You’ll want to include the problem you were looking at, the questions you wanted to answer, and the methodology you used. Also include what you found and what it means (the implications). For a more in-depth explanation of what to include, see the sample outline below.

Advice for Writing a Dissertation Abstract

Every word is important in a dissertation abstract. Because the space you have is so limited, you want to make sure that every word and phrase helps the reader understand what they’re going to gain when they read the entire document. On the other hand, you don’t want to put everything in the abstract because you want them to read the actual paper.

Avoid the temptation to make it more than a page long. The truth is, people aren’t going to read a multiple-page abstract, which means they won’t read your dissertation. Don’t think of it as condensing 100+ pages of material down into one page. Rather, think of it as giving an introduction to what is contained in the pages of your dissertation.

Some schools have a rubric to follow. If they do have one, follow it to the letter. This will save you time and help you please your committee more easily. There’s also usually a good reason behind the requirements they set out, so it will improve the quality of your abstract overall.

While it takes a certain artfulness to be concise, the abstract should be a relatively easy section to write. Basically, you just have to tell people what you did. You don’t need to report any new information or do anything you haven’t already done while writing your dissertation.

Dissertation Abstract Sample Outline

Traditionally, abstracts are less than a page in length, are not indented, and contain no citations. While different universities may have slightly different requirements, most want to see some variation of the following:

• Introduce the study topic and articulate the research problem.
• State the purpose of the study
• State the research method 
• Concisely describe the overall research design, methods, and data analysis procedures.
• Identify the participants.
• Present key results 
• Outline conclusions and recommendations

What Comes After Writing Your Dissertation Abstract?

Writing your dissertation abstract means you’ve completed your study. Congratulations! As you move through the final phases of getting your degree and into your new career path, you may need support navigating today’s competitive job market. 

Academic jobs are more competitive than ever, and starting your own business is best done with the guidance of someone who’s done it before. Take a look at my academic career coaching services and book a free 30-minute consultation .

If you’re still working on your dissertation, I also offer dissertation coaching and dissertation editing services.

Steve Tippins

Steve Tippins, PhD, has thrived in academia for over thirty years. He continues to love teaching in addition to coaching recent PhD graduates as well as students writing their dissertations. Learn more about his dissertation coaching and career coaching services. Book a Free Consultation with Steve Tippins

Related Posts

Dissertation

Dissertation memes.

Sometimes you can’t dissertate anymore and you just need to meme. Don’t worry, I’ve got you. Here are some of my favorite dissertation memes that I’ve seen lately. My Favorite Dissertation Memes For when you Read more…

Surviving Post Dissertation Stress Disorder

The process of earning a doctorate can be long and stressful – and for some people, it can even be traumatic. This may be hard for those who haven’t been through a doctoral program to Read more…

PhD by Publication

PhD by publication, also known as “PhD by portfolio” or “PhD by published works,” is a relatively new route to completing your dissertation requirements for your doctoral degree. In the traditional dissertation route, you have Read more…

What is a dissertation abstract and how do I write one for my PhD?

Feb 12, 2019

There are a lot of posts that talk about how to write an abstract. Most say that you should write your abstract to impress your examiner.

We say that you need to flip things upside down: sure, your examiner will read it and want to see that you’ve written it well, but you should actually have your next boss in mind when you write it.

When you apply for your first academic job, the abstract may be the only part of your thesis that your new boss will read. They may not have the time or energy to read the whole thesis, so the abstract plays a crucial role. You should write it as if you academic career depends on it.

In this guide we talk about how to write an outstanding abstract that will (hopefully) land you a job.

If you haven’t already, make sure you download our PhD Writing Template , which you can use in conjunction with this guide to supercharge your PhD.

What is an abstract?

  This is fairly straightforward stuff, but let us be clear so we are all on the same page.

An abstract is a short summary at the beginning of the PhD that sums up the research, summarises the separate sections of the thesis and outlines the contribution.

It is typically used by those wishing to get a broad understanding of a piece of research prior to reading the entire thesis.

When you apply for your first academic job, the hiring manager will take a look through applicants’ abstracts (as well as your CV and covering letter) to create a shortlist. If you are lucky enough to do well at an interview, your potential new boss will take another look through it before deciding whether to offer you the job.

Why don’t they read the whole thing? Apart from the fact that they’re way too busy to read 200+ pages, a well written abstract actually contains all they need to know. It is a way of letting them see what your research is about, what contribution it makes, what your understanding of the field is and how or whether you will fit into the department.

So, you need to write it well.

But, don’t underestimate how hard it is to write a PhD thesis abstract. You have to condense hundred of pages and years of work into a few hundred words (exactly how many will depend on your university, so double check with them before you start writing).

How do I write a good PhD abstract?

Some blog posts use keywords to summarise the content (this one does, scroll down to see them). The abstract is similar. It’s an extended set of keywords to summarise a complex piece of research.

Above all, your PhD abstract should answer the question: ‘so what’ ? In other words, what is the contribution of your thesis to the field?

If you’ve been using our PhD writing template you’ll know that, to do this, your abstract should address six questions:

• What is the reason for writing the thesis?
• What are the current approaches and gaps in the literature?
• What are your research question(s) and aims?
• Which methodology have you used?
• What are the main findings?
• What are the main conclusions and implications?

One thing that should be obvious is that you can’t write your abstract until the study itself has been written. It’ll typically be the last thing you write (alongside the acknowledgements).

But how can I write a great one?

  The tricky thing about writing a great PhD abstract is that you haven’t got much space to answer the six questions above. There are a few things to consider though that will help to elevate your writing and make your abstract as efficient as possible:

• Give a good first impression by writing in short clear sentences
• Don’t repeat the title in the abstract
• Don’t cite references
• Use keywords from the document
• Respect the word limit
• Don’t be vague – the abstract should be a self contained summary of the research, so don’t introduce ambiguous words or complex terms
• Focus on just four or five essential points, concepts, or findings. Don’t, for example, try to explain your entire theoretical framework
• Edit it carefully. Make sure every word is relevant (you haven’t got room for wasted words) and that each sentence has maximum impact
• Avoid lengthy background information
• Don’t mention anything that isn’t discussed in the thesis
• Avoid overstatements
• Don’t spin your findings, contribution or significance to make your research sound grander or more influential that it actually is

Examples of a good and bad abstract

We can see that the bad abstract fails to answer the six questions posed above. It reads more like a PhD proposal, rather than a summary of a piece of research.

Specifically:

• It doesn’t discuss the reason why the thesis was written
• It doesn’t outline the gaps in the literature
• It doesn’t outline the research questions or aims
• It doesn’t discuss the methods
• It doesn’t discuss the findings
• It doesn’t discuss the conclusions and implications of the research.

It is also too short, lacks adequate keywords and introduces unnecessary detail. The abbreviations and references only serve to confuse the reader and the claim that the thesis will ‘develop a new theory of climate change’ is both vague and over-ambitious. The reader will see through this.

The good abstract though does a much better job at answering the six questions and summarising the research.

• The reason why the thesis was written is stated: ‘We do so to better enable policy makers and academics to understand the nuances of multi-level climate governance’ and….’it informs our theoretical understanding of climate governance by introducing a focus on local government hitherto lacking, and informs our empirical understanding of housing and recycling policy.’
• The gap is clearly defined: ‘The theory has neglected to account for the role of local governments.’
• The research question are laid out: ‘We ask to what extent and in what ways local governments in the UK’…
• The methods are hinted at: ‘Using a case study…’
• The findings are summarised: ‘We show that local governments are both implementers and interpreters of policy. We also show that they make innovative contributions to and influence the direction of national policy.’
• The conclusions and implications are clear: ‘The significance of this study is that it informs our theoretical understanding of climate governance by introducing a focus on local government hitherto lacking, and informs our empirical understanding of housing and recycling policy.’

This abstract is of a much better length, and it fully summarises what the thesis is about. We can see that if someone (i.e. your hiring manager) were to read just this abstract, they’d understand what your thesis is about and the contribution that it makes.

Your PhD thesis. All on one page. 

Use our free PhD structure template to quickly visualise every element of your thesis. 

I can’t summarise my thesis, what do I do?

  We suggest you fill out our PhD Writing Template . We’ve designed it so that you can visualise your PhD on one page and easily see the main components. It’s really easy to use. It asks you a few questions related to each section of your thesis. As you answer them, you develop a synopsis. You can use that synopsis to inform your abstract. If you haven’t downloaded it, you can find it here.

  Like everything related to writing, it takes practice before you get great at writing abstracts. Follow our tips and you’ll have a head start over others.

Remember, you’re not writing your abstract for anyone other than your hiring manager. Make sure it showcases the best of your research and shows your skills as both a researcher and a writer.

If you’re struggling, send us your abstract by email and we’ll have give you free advice on how to improve it.

Hello, Doctor…

Sounds good, doesn’t it?  Be able to call yourself Doctor sooner with our five-star rated How to Write A PhD email-course. Learn everything your supervisor should have taught you about planning and completing a PhD.

Now half price. Join hundreds of other students and become a better thesis writer, or your money back. 

Share this:

Hello! I am a first year PhD student and I am interested in your Thesis writing course. However, I don’t have Paypal, thus I would like to know if there is an alternative way for you to get paid. I hope so, because I have been “following” you and I think the course can be really useful for me 🙂 Hope to hear from you soon. Best wishes, Belén Merelas

Thanks for the comment – I have sent you an email.

Hello! I am a Master’s student and I have applied for a PhD position. The professors have asked me to write a short abstract-like text, based on a brief sentence they will send me, related to the project study. How am I supposed to write a text like that when I don’t have the whole paper, the methods, results etc? Thank you in advance!

Hi Maria. I’m afraid that without knowing more about your topic or subject I am unable to give you advice on this. Sorry I can’t help in the way you may have hoped.

Thank u so much… your tips have really helped me to broaden my scope on the idea of how to write an abstract for my Ph.D. course. This is so thoughtful of you… The article is very informative and helpful…Thanks again!

I’m so pleased. Thanks for your lovely words. They’re music to my ears.

Very insightful Thanks

Glad you think so. Good luck with the writing.

Thank you so much Doc

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Search The PhD Knowledge Base

Most popular articles from the phd knowlege base.

The PhD Knowledge Base Categories

• Your PhD and Covid
• Mastering your theory and literature review chapters
• How to structure and write every chapter of the PhD
• How to stay motivated and productive
• Techniques to improve your writing and fluency
• Advice on maintaining good mental health
• Resources designed for non-native English speakers
• PhD Writing Template
• Explore our back-catalogue of motivational advice

• How It Works
• PhD thesis writing
• Master thesis writing
• Bachelor thesis writing
• Dissertation writing service
• Dissertation abstract writing
• Thesis proposal writing
• Thesis editing service
• Thesis proofreading service
• Thesis formatting service
• Coursework writing service
• Research paper writing service
• Architecture thesis writing
• Computer science thesis writing
• Engineering thesis writing
• History thesis writing
• MBA thesis writing
• Nursing dissertation writing
• Psychology dissertation writing
• Sociology thesis writing
• Statistics dissertation writing
• Buy dissertation online
• Write my dissertation
• Cheap thesis
• Cheap dissertation
• Custom dissertation
• Dissertation help
• Pay for thesis
• Pay for dissertation
• Senior thesis
• Write my thesis

How to Craft a Killer Dissertation Abstract 2023

Learn how you can write a top-rated dissertation abstract thick and fast, with our professional guide.

Special tip – maintain a hawk-eye to the end.

What is an Abstract in a Dissertation?

A dissertation abstract is a summary of the entire thesis. It gives the significant proponents of your paper in a highly condensed form.

An abstract in a dissertation serves the following functions:

• Acts as an introduction to your dissertation article
• Sets the stage for the thesis
• Can substitute the whole thesis

The elements of an abstract include:

• Research problem and objectives
• Major results
• The conclusion

It is an essential component of the thesis that can either earn you a top grade or be the reason for your academic downfall.

How to Write a Dissertation Abstract

It is essential to determine the type of abstract for your dissertation. In writing a dissertation abstract, take note of the following types:

• Descriptive Abstract

It gives the kind of information found in your paper. A descriptive outline is usually concise and can be about 100 words or less.

• Critical Abstract

It describes the main findings and, additionally, a comment on the validity, completeness, or reliability of the study. Due to its interpretive nature, it generally contains 400-500 words in length.

• Informative Abstract

As the name suggests, this type presents and explains the main arguments, essential results, and evidence in the thesis. Although the length varies, it is not more than 300 words in length.

• Highlight Abstract

It serves to attract the reader’s attention to the paper. It uses leading remarks to spark the interest of the audience.

We are now going to see how to write an abstract for a dissertation in ten significant steps:

Ten Top-Notch Steps to Writing an Abstract for a Dissertation

Step 1: Define the purpose of your research

Start by making plain the purpose of your study. State the research question you are going to handle or the practical problem of your paper.

Do not delve into much detailed information here. For starters, you can have a brief context on the social or academic relevance of your topic.

Write the objectives of your research after stating the problem. When indicating the goals, use verbs such as:

To test To investigate, To evaluate To analyze

Use either the present or simple past tense for this section. Do not use the future tense in any case since the research is complete already.

Dissertation abstract example for this section:

Correct: This study evaluates the relationship between COVID-19 and flu. Incorrect: This study will determine the relationship between COVID-19 and influenza.

Step 2: Identify the methods you are going to use for your research

Now in this stage, clearly make mention of the ways you are going to use to answer your research question.

Write it in one to two sentences without making it too long. Ensure that the points are precise and to the end.

It should be in the simple past tense. Why? Because you have already done your research and completed it using these methods.

Do not go into the strengths and weaknesses of the research methods. The reader should be able to read through it fast and still understand the strategy and methodology of your thesis.

Correct: Direct observation was conducted on 40 COVID-19 patients. Correct: Questionnaires were administered to 20 doctors dealing with COVID-19 patients. Incorrect: Laboratory experiments will be done with ten specimens.

Step 3: Make a summary of the results

After collecting data, it is time to give brief but elaborate results in the abstract for the dissertation.

The results section depends on the length and complexity of the research. However, ensure that it doesn’t make the abstract longer than is recommended.

Do not include irrelevant results which may not add any value to your paper. Strive to point out the essential outcomes of the article which support or answer your research question.

Write the results in either the present or simple past tense.

Correct: Our findings show a substantial similarity in the symptoms of both COVID-19 and flu. Correct: Our analysis showed a significant similarity between the symptoms of both COVID-19 and flu. Incorrect: Our study has shown a considerable similarity in the symptoms of both COVID-19 and flu. Incorrect: Our findings will be showing a substantial similarity in the symptoms of both COVID-19 and flu.

Step 4: Finish off with the conclusions from your research

Your abstract should have an answer to the research question, which is in this part. Your reader should get the main point of your thesis at this point. What has your research found or proved? The conclusion should be able to tell this to the reader.

Improve the credibility of your dissertation by adding any relevant limitations in this section of the abstract. From the thesis abstract examples, we are going to see below; it is evident that the conclusion is as brief as possible.

You can also have recommendations or suggestions for further research in your conclusion. Nevertheless, they should be as brief as possible. Do not write a long list that will interfere with the length of the abstract.

Write the conclusion in the present simple tense. Here are examples for your inspiration:

Correct: We conclude that flu is a primary symptom of COVID-19. Incorrect: We found that influenza is a primary symptom of COVID-19.

Bonus Tips for Writing a Dissertation Abstract

Now that we have looked at the essential steps to follow, here are some expert tips to crank up your abstract:

Follow the recommended formatting requirements for the abstract. The format will include; word limit, length, and spacing, style (APA, MLA, etc.)

The standard formatting requires that you do not write more than one double-spaced page.

• Avoid verbosity

Each word in a sentence counts due to the brevity of an abstract. Therefore, use short but communicating sentences.

Do not add unnecessary words or jargon, as this will obscure your abstract. Remember that the reader should be able to understand your abstract in the shortest time possible.

Ensure that you maintain the proper balance between the different elements of the abstract.

Checklist for Writing an Abstract

• The type of abstract identified
• The conformity of the abstract to the conventions of the type chosen
• Is the problem interesting to write on
• What is your approach? (Prototype models, analytical models, etc.)
• What’s the answer (results)
• What is the implication of your solution? (Conclusion)

Writing a successful abstract requires both hard work and determination, but its fruits are worth the struggle. As you plan to write yours, ensure that all the elements discussed above appear in your paper.

For expert writing help , we have professional dissertation writers to get you started. What are you waiting for now?

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Comment * Error message

Name * Error message

Email * Error message

Save my name, email, and website in this browser for the next time I comment.

As Putin continues killing civilians, bombing kindergartens, and threatening WWIII, Ukraine fights for the world's peaceful future.

Ukraine Live Updates

Get science-backed answers as you write with Paperpal's Research feature

How to Write an Abstract in Research Papers (with Examples)

An abstract in research papers is a keyword-rich summary usually not exceeding 200-350 words. It can be considered the “face” of research papers because it creates an initial impression on the readers. While searching databases (such as PubMed) for research papers, a title is usually the first selection criterion for readers. If the title matches their search criteria, then the readers read the abstract, which sets the tone of the paper. Titles and abstracts are often the only freely available parts of research papers on journal websites. The pdf versions of full articles need to be purchased. Journal reviewers are often provided with only the title and abstract before they agree to review the complete paper. [ 1]  

Abstracts in research papers provide readers with a quick insight into what the paper is about to help them decide whether they want to read it further or not. Abstracts are the main selling points of articles and therefore should be carefully drafted, accurately highlighting the important aspects. [ 2]  

This article will help you identify the important components and provide tips on how to write an abstract in research papers effectively

What is an Abstract?  

An abstract in research papers can be defined as a synopsis of the paper. It should be clear, direct, self-contained, specific, unbiased, and concise. These summaries are published along with the complete research paper and are also submitted to conferences for consideration for presentation.  

Abstracts are of four types and journals can follow any of these formats: [ 2]  

• Structured  
• Unstructured  
• Descriptive  
• Informative  

Structured abstracts are used by most journals because they are more organized and have clear sections, usually including introduction/background; objective; design, settings, and participants (or materials and methods); outcomes and measures; results; and conclusion. These headings may differ based on the journal or the type of paper. Clinical trial abstracts should include the essential items mentioned in the CONSORT (Consolidated Standards Of Reporting Trials) guidelines.  

Figure 1. Structured abstract example [3] 

Unstructured abstracts are common in social science, humanities, and physical science journals. They usually have one paragraph and no specific structure or subheadings. These abstracts are commonly used for research papers that don’t report original work and therefore have a more flexible and narrative style.  

Figure 2. Unstructured abstract example [3] 

Descriptive abstracts are short (75–150 words) and provide an outline with only the most important points of research papers. They are used for shorter articles such as case reports, reviews, and opinions where space is at a premium, and rarely for original investigations. These abstracts don’t present the results but mainly list the topics covered.  

Here’s a sample abstract . [ 4]  

“Design of a Radio-Based System for Distribution Automation”  

A new survey by the Maryland Public Utilities Commission suggests that utilities have not effectively explained to consumers the benefits of smart meters. The two-year study of 86,000 consumers concludes that the long-term benefits of smart meters will not be realized until consumers understand the benefits of shifting some of their power usage to off-peak hours in response to the data they receive from their meters. The study presents recommendations for utilities and municipal governments to improve customer understanding of how to use the smart meters effectively.  

Keywords: smart meters, distribution systems, load, customer attitudes, power consumption, utilities  

Informative abstracts (structured or unstructured) give a complete detailed summary, including the main results, of the research paper and may or may not have subsections.   

Figure 3. Informative abstract example [5] 

Purpose of Abstracts in Research    

Abstracts in research have two main purposes—selection and indexing. [ 6,7]  

• Selection : Abstracts allow interested readers to quickly decide the relevance of a paper to gauge if they should read it completely.   
• Indexing : Most academic journal databases accessed through libraries enable you to search abstracts, allowing for quick retrieval of relevant articles and avoiding unnecessary search results. Therefore, abstracts must necessarily include the keywords that researchers may use to search for articles.  

Thus, a well-written, keyword-rich abstract can p ique readers’ interest and curiosity and help them decide whether they want to read the complete paper. It can also direct readers to articles of potential clinical and research interest during an online search.  

Contents of Abstracts in Research  

Abstracts in research papers summarize the main points of an article and are broadly categorized into four or five sections. Here are some details on how to write an abstract .   

Introduction/Background and/or Objectives  

This section should provide the following information:  

• What is already known about the subject?  
• What is not known about the subject or what does the study aim to investigate?  

The hypothesis or research question and objectives should be mentioned here. The Background sets the context for the rest of the paper and its length should be short so that the word count could be saved for the Results or other information directly pertaining to the study. The objective should be written in present or past simple tense.  

Examples:  

The antidepressant efficacy of desvenlafaxine (DV) has been established in 8-week, randomized controlled trials. The present study examined the continued efficacy of DV across 6 months of maintenance treatment . [ 1]  

Objective: To describe gastric and breast cancer risk estimates for individuals with CDH1 variants.  

Design, Setting, and Participants (or Materials and Methods)  

This section should provide information on the processes used and should be written in past simple tense because the process is already completed.  

A few important questions to be answered include:  

• What was the research design and setting?  
• What was the sample size and how were the participants sampled?  
• What treatments did the participants receive?  
• What were the data collection and data analysis dates?  
• What was the primary outcome measure?  

Hazard ratios (HRs) were estimated for each cancer type and used to calculate cumulative risks and risks per decade of life up to age 80 years.  

This section, written in either present or past simple tense, should be the longest and should describe the main findings of the study. Here’s an example of how descriptive the sentences should be:  

Avoid: Response rates differed significantly between diabetic and nondiabetic patients.  

Better: The response rate was higher in nondiabetic than in diabetic patients (49% vs 30%, respectively; P<0.01).  

This section should include the following information:  

• Total number of patients (included, excluded [exclusion criteria])  
• Primary and secondary outcomes, expressed in words, and supported by numerical data  
• Data on adverse outcomes  

Example: [ 8]  

In total, 10.9% of students were reported to have favorable study skills. The minimum score was found for preparation for examination domain. Also, a significantly positive correlation was observed between students’ study skills and their Grade Point Average (GPA) of previous term (P=0.001, r=0.269) and satisfaction with study skills (P=0.001, r=0.493).  

Conclusions  

Here, authors should mention the importance of their findings and also the practical and theoretical implications, which would benefit readers referring to this paper for their own research. Present simple tense should be used here.  

Examples: [ 1,8]  

The 9.3% prevalence of bipolar spectrum disorders in students at an arts university is substantially higher than general population estimates. These findings strengthen the oft-expressed hypothesis linking creativity with affective psychopathology.  

The findings indicated that students’ study skills need to be improved. Given the significant relationship between study skills and GPA, as an index of academic achievement, and satisfaction, it is necessary to promote the students’ study skills. These skills are suggested to be reinforced, with more emphasis on weaker domains.  

When to Write an Abstract  

In addition to knowing how to write an abstract , you should also know when to write an abstract . It’s best to write abstracts once the paper is completed because this would make it easier for authors to extract relevant parts from every section.  

Abstracts are usually required for: [ 7]    

• submitting articles to journals  
• applying for research grants   
• writing book proposals  
• completing and submitting dissertations  
• submitting proposals for conference papers  

Mostly, the author of the entire work writes the abstract (the first author, in works with multiple authors). However, there are professional abstracting services that hire writers to draft abstracts of other people’s work.   

How to Write an Abstract (Step-by-Step Process)  

Here are some key steps on how to write an abstract in research papers: [ 9]  

• Write the abstract after you’ve finished writing your paper.  
• Select the major objectives/hypotheses and conclusions from your Introduction and Conclusion sections.  
• Select key sentences from your Methods section.  
• Identify the major results from the Results section.  
• Paraphrase or re-write the sentences selected in steps 2, 3, and 4 in your own words into one or two paragraphs in the following sequence: Introduction/Objective, Methods, Results, and Conclusions. The headings may differ among journals, but the content remains the same.  
• Ensure that this draft does not contain: a.   new information that is not present in the paper b.   undefined abbreviations c.   a discussion of previous literature or reference citations d.   unnecessary details about the methods used  
• Remove all extra information and connect your sentences to ensure that the information flows well, preferably in the following order: purpose; basic study design, methodology and techniques used; major findings; summary of your interpretations, conclusions, and implications. Use section headings for structured abstracts.  
• Ensure consistency between the information presented in the abstract and the paper.  
• Check to see if the final abstract meets the guidelines of the target journal (word limit, type of abstract, recommended subheadings, etc.) and if all the required information has been included.  

Choosing Keywords for Abstracts  

Keywords [ 2] are the important and repeatedly used words and phrases in research papers and can help indexers and search engines find papers relevant to your requirements. Easy retrieval would help in reaching a wider audience and eventually gain more citations. In the fields of medicine and health, keywords should preferably be chosen from the Medical Subject Headings (MeSH) list of the US National Library of Medicine because they are used for indexing. These keywords need to be different from the words in the main title (automatically used for indexing) but can be variants of the terms/phrases used in the title, abstract, and the main text. Keywords should represent the content of your manuscript and be specific to your subject area.  

Basic tips for authors [ 10,11]  

• Read through your paper and highlight key terms or phrases that are most relevant and frequently used in your field, to ensure familiarity.  
• Several journals provide instructions about the length (eg, 3 words in a keyword) and maximum number of keywords allowed and other related rules. Create a list of keywords based on these instructions and include specific phrases containing 2 to 4 words. A longer string of words would yield generic results irrelevant to your field.  
• Use abbreviations, acronyms, and initializations if these would be more familiar.  
• Search with your keywords to ensure the results fit with your article and assess how helpful they would be to readers.  
• Narrow down your keywords to about five to ten, to ensure accuracy.  
• Finalize your list based on the maximum number allowed.  

  Few examples: [ 12]  

Important Tips for Writing an Abstract  

Here are a few tips on how to write an abstract to ensure that your abstract is complete, concise, and accurate. [ 1,2]  

• Write the abstract last.  
• Follow journal-specific formatting guidelines or Instructions to Authors strictly to ensure acceptance for publication.  
• Proofread the final draft meticulously to avoid grammatical or typographical errors.  
• Ensure that the terms or data mentioned in the abstract are consistent with the main text.  
• Include appropriate keywords at the end.

Do not include:  

• New information  
• Text citations to references  
• Citations to tables and figures  
• Generic statements  
• Abbreviations unless necessary, like a trial or study name  

Key Takeaways    

Here’s a quick snapshot of all the important aspects of how to write an abstract . [2]

• An abstract in research is a summary of the paper and describes only the main aspects. Typically, abstracts are about 200-350 words long.  
• Abstracts are of four types—structured, unstructured, descriptive, and informative.  
• Abstracts should be simple, clear, concise, independent, and unbiased (present both favorable and adverse outcomes).  
• They should adhere to the prescribed journal format, including word limits, section headings, number of keywords, fonts used, etc.  
• The terminology should be consistent with the main text.   
• Although the section heading names may differ for journals, every abstract should include a background and objective, analysis methods, primary results, and conclusions.  
• Nonstandard abbreviations, references, and URLs shouldn’t be included.  
• Only relevant and specific keywords should be used to ensure focused searches and higher citation frequency.  
• Abstracts should be written last after completing the main paper.  

Frequently Asked Questions   

Q1. Do all journals have different guidelines for abstracts?  

A1. Yes, all journals have their own specific guidelines for writing abstracts; a few examples are given in the following table. [ 6,13,14,15]  

Q2. What are the common mistakes to avoid when writing an abstract?  

A2. Listed below are a few mistakes that authors may make inadvertently while writing abstracts.  

• Copying sentences from the paper verbatim  

An abstract is a summary, which should be created by paraphrasing your own work or writing in your own words. Extracting sentences from every section and combining them into one paragraph cannot be considered summarizing.  

• Not adhering to the formatting guidelines  

Journals have special instructions for writing abstracts, such as word limits and section headings. These should be followed strictly to avoid rejections.  

• Not including the right amount of details in every section  

Both too little and too much information could discourage readers. For instance, if the Background has very little information, the readers may not get sufficient context to appreciate your research. Similarly, incomplete information in the Methods and a text-heavy Results section without supporting numerical data may affect the credibility of your research.  

• Including citations, standard abbreviations, and detailed measurements  

Typically, abstracts shouldn’t include these elements—citations, URLs, and abbreviations. Only nonstandard abbreviations are allowed or those that would be more familiar to readers than the expansions.  

• Including new information  

Abstracts should strictly include only the same information mentioned in the main text. Any new information should first be added to the text and then to the abstract only if necessary or if permitted by the word limit.  

• Not including keywords  

Keywords are essential for indexing and searching and should be included to increase the frequency of retrieval and citation.  

Q3. What is the difference between abstracts in research papers and conference abstracts? [16]  

A3. The table summarizes the main differences between research and conference abstracts.  

  Thus, abstracts are essential “trailers” that can market your research to a wide audience. The better and more complete the abstract the more are the chances of your paper being read and cited. By following our checklist and ensuring that all key elements are included, you can create a well-structured abstract that summarizes your paper accurately.  

References  

• Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry . 2011; 53(2):172-175. Accessed June 14, 2024. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3136027/  
• Tullu MS. Writing the title and abstract for a research paper: Being concise, precise, and meticulous is the key. 2019; 13(Suppl 1): S12-S17. Accessed June 14, 2024. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6398294/  
• Zawia J. Writing an Academic Paper? Get to know Abstracts vs. Structured Abstracts. Medium. Published October 16, 2023. Accessed June 16, 2024. https://medium.com/@jamala.zawia/writing-an-academic-paper-get-to-know-abstracts-vs-structured-abstracts-11ed86888367  
• Markel M and Selber S. Technical Communication, 12 th edition. 2018; pp. 482. Bedford/St Martin’s.  
• Abstracts. Arkansas State University. Accessed June 17, 2024. https://www.astate.edu/a/global-initiatives/online/a-state-online-services/online-writing-center/resources/How%20to%20Write%20an%20Abstract1.pdf  
• AMA Manual of Style. 11 th edition. Oxford University Press.  
• Writing an Abstract. The University of Melbourne. Accessed June 16, 2024. https://services.unimelb.edu.au/__data/assets/pdf_file/0007/471274/Writing_an_Abstract_Update_051112.pdf  
• 10 Good Abstract Examples that will Kickstart Your Brain. Kibin Essay Writing Blog. Published April 5, 2017. Accessed June 17, 2024. https://www.kibin.com/essay-writing-blog/10-good-abstract-examples/  
• A 10-step guide to make your research paper abstract more effective. Editage Insights. Published October 16, 2013. Accessed June 17, 2024. https://www.editage.com/insights/a-10-step-guide-to-make-your-research-paper-abstract-more-effective  
• Using keywords to write your title and abstract. Taylor & Francis Author Services. Accessed June 15, 2024. https://authorservices.taylorandfrancis.com/publishing-your-research/writing-your-paper/using-keywords-to-write-title-and-abstract/  
• How to choose and use keywords in research papers. Paperpal by Editage blog. Published March 10, 2023. Accessed June 17, 2024. https://paperpal.com/blog/researcher-resources/phd-pointers/how-to-choose-and-use-keywords-in-research-papers  
• Title, abstract and keywords. Springer. Accessed June 16, 2024. https://www.springer.com/it/authors-editors/authorandreviewertutorials/writing-a-journal-manuscript/title-abstract-and-keywords/10285522  
• Abstract and keywords guide. APA Style, 7 th edition. Accessed June 18, 2024. https://apastyle.apa.org/instructional-aids/abstract-keywords-guide.pdf  
• Abstract guidelines. American Society for Microbiology. Accessed June 18, 2024. https://asm.org/events/asm-microbe/present/abstract-guidelines  
• Guidelines for conference abstracts. The Lancet. Accessed June 16, 2024. https://www.thelancet.com/pb/assets/raw/Lancet/pdfs/Abstract_Guidelines_2013.pdf  
• Is a conference abstract the same as a paper abstract? Global Conference Alliance, Inc. Accessed June 18, 2024. https://globalconference.ca/is-a-conference-abstract-the-same-as-a-paper-abstract/  

Paperpal is a comprehensive AI writing toolkit that helps students and researchers achieve 2x the writing in half the time. It leverages 21+ years of STM experience and insights from millions of research articles to provide in-depth academic writing, language editing, and submission readiness support to help you write better, faster.  

Get accurate academic translations, rewriting support, grammar checks, vocabulary suggestions, and generative AI assistance that delivers human precision at machine speed. Try for free or upgrade to Paperpal Prime starting at US$19 a month to access premium features, including consistency, plagiarism, and 30+ submission readiness checks to help you succeed.  

Experience the future of academic writing – Sign up to Paperpal and start writing for free!  

Related Reads:

• What are Journal Guidelines on Using Generative AI Tools
• How to Write a High-Quality Conference Paper

How to Write Dissertation Acknowledgements?

• How to Write the First Draft of a Research Paper with Paperpal? 

Top 7 AI Tools for Research 2024

You may also like, maintaining academic integrity with paperpal’s generative ai writing..., research funding basics: what should a grant proposal..., how to structure an essay, leveraging generative ai to enhance student understanding of..., how to write a good hook for essays,..., addressing peer review feedback and mastering manuscript revisions..., how paperpal can boost comprehension and foster interdisciplinary..., what is the importance of a concept paper..., how to write the first draft of a....

GSLC Dissertation Support Guide

• GSLC Dissertation Support Guide Home
• Digital Accessibility [alt text] Requirements from OhioLINK
• Digital Dissertations [PDF] + Supplemental Files / Font Requirements
• Essential Resources: Dissertation Handbook & Style Choices & Authoritative Manuals
• Including Multimedia Inside Your Dissertation Document- Tips From WEX This link opens in a new window
• WEX FAQs and other editing tips / checklists This link opens in a new window
• Our Archives : Where your Dissertation will "live"
• Dissertation Titles and Online Discovery

Abstract Requirements

Selecting keywords & subject headings.

• Multimedia /Data Set Inclusion - Supplemental Files
• Author Introduction - Multimedia Option
• Your Name and Your ORCID Number
• Copyright and Permissions
• Permission Request Checklist
• Final Submission - Link & Important Instructions
• Post - Submission
• Curating your Scholarly Identity This link opens in a new window
• Last Steps Workshop This link opens in a new window

The Dissertation Abstract

The abstract is your dissertation's calling card to the world.  The abstract is usually your first connection with every potential reader.   It also is a key feature in discovery of your dissertation through search engines.

Abstract Requirements and Checklist :

• Number of paragraphs  : Abstract should be ONE PARAGRAPH  [no returns]
• CC License Option: If you have chosen a Creative Commons License , this must specified in the abstract mentioning the type of license and linking back the the CC License page.
• how many supplemental files
• type of file
• whether or not they are also accessible within the PDF.  
• T his includes the author video abstract
• Length:  Abstracts no longer have length requirements in UMI/Proquest, but the print version of the database will cut off at 350 words MAXIMUM.   APA Style calls for 150-250 words, which is most reasonable.    The shorter, the better.
• Final Sentence :  To enhance discovery every abstract must carry this sentence at the end

  This dissertation is available in open access at AURA: Antioch University Repository and Archive, https://aura.antioch.edu/  and OhioLINK ETD Center, https://etd.ohiolink.edu/

Keywords are also essential to your dissertation being discovered online.

Keyword Guidelines:

• Place the keywords a few lines below the Abstract in your dissertation
• Your Keyword field is limited to 350  characters
• The Keywords in the Final Submission Form must match the Keywords in the Dissertation

Selecting Keyword :

Consider:   Which words would someone interested in my dissertation use? 

• ​ Language/ Jargon  used in your academic field? e,g, community of practice, best self
• Synonyms and Related Terms:  e.g. non-profit, not-for-profit, third sector / eating disorders,  anorexia, bulimia
• Alternate Spellings :  e.g. organisation, organization
• Methodology : e.g. grounded theory, qualitative, etc.
• Population:   e.g.  teachers, executives, African Americans, college students, grandparents
• Venue:   e.g.  workplace, corporations, elementary schools

Test your Keywords in Google and Google Scholar to see if they yield the items similar to your dissertation.

Subject Headings

On the Final Submission Form you will also be able to select Subject Headings for the Ohiolink ETD Center Archive;

• These subject headings DO NOT go into your dissertation
• This is a "Controlled Vocabulary" List.    You cannot change or add to the list.  There is no Subject Heading for LEADERSHIP. So add 'leadership' in your keyword list.
• Choose the most appropriate subject headings for your dissertation.  

Attached below is the current list from which you will choose.

• << Previous: Dissertation Titles and Online Discovery
• Next: Multimedia /Data Set Inclusion - Supplemental Files >>
• Last Updated: Jul 3, 2024 6:46 AM
• URL: https://libguides-phd.antioch.edu/AUETDCENTRAL

Dissertations: Abstracts & Summaries

• Choosing a topic
• Research Proposal
• Reviewing the literature
• Introductions & Conclusions
• Writing Chapters
• Wrapping Up
• Abstracts & Summaries
• Managing Expectations

Introduction

An abstract is a concise summary of a research dissertation. It provides an overview of the main points, methodology, results, and conclusions of the study. Abstracts are typically written with the aim of providing readers with a quick understanding of the dissertation.

A dissertation summary provides a brief overview of the research study and its main findings. It may also include key information such as the purpose of the study, the research question and methodology.

Steps to writing abstracts & summaries

• Helpful words & phrases
• Analyse dissertation abstracts to understand the structure, content, and style. Pay attention to how other researchers summarize their research, highlight key findings, and convey the significance of their work in a concise manner.
• Identify key components that a strong abstract should include, such as the research problem or question, objectives, methodology, main findings, and implications. Note the word limit for the abstract
• Review the dissertation and identify the key points to be conveyed in the abstract. Focus on summarising the research problem, objectives, methodology, key findings, and the significance of your work. Be selective and concise in the summary, highlighting the most important aspects.
• The structure of an abstract should include an introduction (research problem and objectives), methods (brief description of the research design and methods used), results (main findings or outcomes), and conclusion (implications and significance of the research). However, the specific structure may vary depending on the requirements of the university.
• Emphasize the significance of the research and its potential implications. Explain how the findings contribute to the existing body of knowledge and address the research gap in the field. Clearly communicate the practical, theoretical, or policy implications of the work.

Here are some additional tips for writing a strong abstract:

• Be clear and concise. An abstract should be easy to read and understand.
• Be specific. Don't just say that you have found something; explain what you have found.
• Be informative. An abstract should give the reader a good understanding of the research.
• Be persuasive. An abstract should convince the reader to read the dissertation.

By following these steps, we can write an abstract that is clear, concise, objective, informative, and persuasive. This will help us to make a good first impression on our readers and encourage them to read our dissertation.

• Brainstorm a list of key points from your dissertation. These key points should be the most important findings or conclusions from your research.
• Write a one-sentence summary of each chapter of the dissertation. This will help you to identify the key points of your research.
• Write a one-paragraph summary of your entire dissertation. This will help you to see the big picture of your research.
• Give a presentation on your dissertation to a group of friends or colleagues. This will help you to practice explaining your research in a clear and concise way.
• Get feedback on your summaries from your supervisor or a friend. This will help you to identify any areas where your summaries could be improved.
• Read other dissertation summaries . This can help you to see how other students have structured their summaries and what they have included.

By following these steps, we can improve our skills at writing summaries for our dissertation. This will help us to communicate our research effectively to our readers.

When writing abstracts and summaries, it is crucial to use concise and clear language to provide an overview of the main points and findings of the work.

Here are some words and phrases that can be helpful in writing abstracts and summaries:

• This study examines/analyses/investigates...
• The purpose of this research is to...
• The objective of this study is to...
• This paper aims to explore/evaluate/assess...
• The findings of this study suggest...
• This research contributes to the understanding of...
• The results indicate that...
• The main focus of this research is on...
• This study provides insights into...
• In summary/In brief/To summarise...
• This work provides a comprehensive overview of...
• The main points discussed in this article are...
• This study highlights the importance/significance of...
• The key findings of this research are...
• The main arguments presented in this paper are...
• This summary outlines the major aspects of...
• The main implications of this study are...
• This research offers a synthesis of...

Activity with examples

Read the following abstracts and say whether these have the following key elements:

• The research question or problem being addressed
• The methods used to conduct the research
• The main findings of the research
• The conclusions drawn from the research

This inquiry explores the underrepresentation of Black students in the Gifted and Advanced Placement (AP) Program from the perspective of the student. This study focused primarily on the barriers students perceived that hindered their participation. In addition, I explored the role teachers and guidance counselors play in Black students’ decisions to enroll or drop out of AP classes, and how the history and institution of gifted educations has aid and excluded Black students. Five Black high school students, four male, and one female, were interviewed .

Theoretically, my study was grounded in two distinct inquiries; Critical Theory (Kincheloe & McLaren, 2008) and Critical Race Theory (Bell, 1980, 2004; Delgado, 1990, 2000; Delgado & Stefancic, 2001; Ladson-Billings, 1999, 2005; Ladson-Billings & Tate, 1995). Critical Race Narrative was the primary means I used to contextualize and analyze the participants’ narratives.

Methodologically, the study draws on the work of Narrative Inquiry (Clandinin & Connelly, 2000) and Personal ~ Passionate ~ Participatory Inquiry (He & Phillion, 2008) both of which allows the researcher and participants to create new insights which can bring about social change. Four findings have emerged from the research. Students hold a variety of misconceptions about Advanced Placement classes. The fear of failing and the fear of stress played a significant factor in the decision to enroll in AP classes. Students expressed they received little to no encouragement from teachers and guidance counselors concerning AP classes. The issue of being a minority within a minority in AP classes was also a major deterrent in the decision of these participants in choosing to enroll in AP courses.

Creativity is valued in music education policy, yet common instrumental music education instructional practice often prioritizes a performance model concerned primarily with accurate performance of existing repertoire from notation (Battisti, 2002; Reimer, 2009; Stringham, 2010). While some in the profession claim that the act of performing existing music is creative, in and of itself (Battisti, 2002; Reimer, 2009), a growing body of literature affirms the crucial role of generative creativity in helping children learn music (Lehmann, Sloboda, & Woody, 2007; Reynolds, Long, & Valerio, 2007). A lack of consensus between policy and practice suggests a need to (a) define creativity more clearly, and (b) examine how creativity is currently implemented in instrumental music instruction.

Contemporary racism is characterized by colorblind ideology that allows white people to rationalize and ignore the consequences of racism through everyday thought and discourse (Bonilla-Silva 2014). Despite pervasive ideologies, some whites are able to move past colorblind frames and assume an anti-racist identity. Little is known about the mechanisms that lead people to recognize their privilege and commit to combatting racism. Past research has identified the need for whites to develop both a structural and personalized understanding of racism to achieve an anti-racist stance. This study examines the role of social ties in fostering this critical understanding among white anti-racist activists. Using purposive and snowball sampling, this study draws upon life course history interviews with 12 white anti-racist organizers engaged in racial justice efforts within the Northwestern United States. Through qualitative thematic analysis relationships with People of Color, other anti-racist whites, and non-allied whites were highlighted as aiding whites’ progression towards an anti-racist identity. Through these relationships, participants were able to redefine their racial identities to be absent of toxic whiteness.

The thesis seeks to develop understandings of dynamics in federal political systems in crisis, the nature of the relationship between crisis and process, and the range of tools available for conflict reduction that extend beyond those available in the constitutional frameworks of each system. The dissertation explores these through a comparative study of a small n of cases that meet the criterion of a period of crisis as the independent variable: the Staten Island secession crisis in New York City, the existential crisis of Quebec’s relationship with the rest of Canada, and the crisis of the UK and European integration at the time of Maastricht. The data collection process for each is framed temporally, within the duration of crisis as defined, and spatially, within the territorial extent of the system. The thesis uses data gathered from primary and secondary written sources based on the relevance to the research questions and conceptual framework. The analysis, located in the comparative section, identifies a number of important findings that contribute to theoretical understandings of federalism. The evidence gives support to , and extends the understanding of, federalism by demonstrating that the crisis potential in each case becomes evident because of challenges to some communities’ values that arise from the process-based nature of federalism, through identifiable demands and counter-demands made by actors. Moreover, it highlights how the constraining nature of constitutional frameworks makes the use of extra-constitutional arrangements essential, in particular with the use of instrumentalities. The thesis also develops an understanding of how federal power sharing evolves post-crisis with flexible understandings of the division of competences, and the potential for a return to crisis in systems in the absence of a deeper understanding and application of federal principles by political elites.

Journal of Suffolk Student Research

The Journal of Suffolk Student Research is an online academic journal, dedicated to the publication of high-quality undergraduate and postgraduate student research undertaken by University of Suffolk students. The journal will showcase the most outstanding student research undertaken at the University of Suffolk. It aims to promote and recognise this outstanding student research by offering valuable early experience of academic publishing and the peer review process. 

Find out more here

• << Previous: Wrapping Up
• Next: Language >>
• Last Updated: Feb 1, 2024 4:22 PM
• URL: https://libguides.uos.ac.uk/dissertations

➔ About the Library

➔ Meet the Team

➔ Customer Service Charter

➔ Library Policies & Regulations

➔ Privacy & Data Protection

Essential Links

➔ A-Z of eResources

➔ Frequently Asked Questions

➔Discover the Library

➔Referencing Help

➔ Print & Copy Services

➔ Service Updates

Library & Learning Services, University of Suffolk, Library Building, Long Street, Ipswich, IP4 1QJ

✉ Email Us: [email protected]

✆ Call Us: +44 (0)1473 3 38700

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Write an Abstract for a Dissertation or Thesis: Guide & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Write an Abstract for a Dissertation or Thesis: Guide & Examples

Table of contents

Use our free Readability checker

A dissertation abstract is a brief summary of a dissertation, typically between 150-300 words. It is a standalone piece of writing that gives the reader an overview of the main ideas and findings of the dissertation.

Generally, this section should include:

• Research problem and questions
• Research methodology
• Key findings and results
• Original contribution
• Practical or theoretical implications.

You need to write an excellent abstract for a dissertation or thesis, since it's the first thing a comitteee will review. Continue reading through to learn how to write a dissertation abstract. In this article, we will discuss its purpose, length, structure and writing steps. Moreover, for reference purposes, this article will include abstract examples for a dissertation and thesis and offer extra guidance on top of that.

In case you are in a hurry, feel free to buy dissertation from our professional writers. Our experts are qualified and have solid experience in writing Ph.D. academic works.

What Is a Dissertation Abstract?

Dissertation abstracts, by definition, are summaries of a thesis's content, usually between 200 and 300 words, used to inform readers about the contents of the study in a quick way. A thesis or dissertation abstract briefly overviews the entire thesis. Dissertation abstracts are found at the beginning of every study, providing the research recap, results, and conclusions. It usually goes right after your title page and before your dissertation table of contents . An abstract for a dissertation (alternatively called “précis” further in the article) should clearly state the main topic of your paper, its overall purpose, and any important research questions or findings. It should also contain any necessary keywords that direct readers to relevant information. In addition, it addresses any implications for further research that may stem from its field. Writing strong précis requires you to think carefully, as they are the critical components that attract readers to peruse your paper.

Purpose of a Dissertation or Thesis Abstract

The primary purpose of an abstract in a dissertation or thesis is to give readers a basic understanding of the completed work. Also, it should create an interest in the topic to motivate readers to read further. Writing an abstract for a dissertation is essential for many reasons: 

• Offers a summary and gives readers an overview of what they should expect from your study.
• Provides an opportunity to showcase the research done, highlighting its importance and impact.
• Identifies any unexplored research gaps to inform future studies and direct the current state of knowledge on the topic.

In general, an abstract of a thesis or a dissertation is a bridge between the research and potential readers.

What Makes a Good Abstract for a Dissertation?

Making a good dissertation abstract requires excellent organization and clarity of thought. Proper specimens must provide convincing arguments supporting your thesis. Writing an effective dissertation abstract requires students to be concise and write engagingly. Below is a list of things that makes it outstanding:

• Maintains clear and concise summary style
• Includes essential keywords for search engine optimization
• Accurately conveys the scope of the thesis
• Strictly adheres to the word count limit specified in your instructions
• Written from a third-person point of view
• Includes objectives, approach, and findings
• Uses simple language without jargon
• Avoids overgeneralized statements or vague claims.

How Long Should a Dissertation Abstract Be?

Abstracts should be long enough to convey the key points of every thesis, yet brief enough to capture readers' attention. A dissertation abstract length should typically be between 200-300 words, i.e., 1 page. But usually, length is indicated in the requirements. Remember that your primary goal here is to provide an engaging and informative thesis summary. Note that following the instructions and templates set forth by your university will ensure your thesis or dissertation abstract meets the writing criteria and adheres to all relevant standards.

Dissertation Abstract Structure

Dissertation abstracts can be organized in different ways and vary slightly depending on your work requirements. However, each abstract of a dissertation should incorporate elements like keywords, methods, results, and conclusions. The structure of a thesis or a dissertation abstract should account for the components included below:

• Title Accurately reflects the topic of your thesis.
• Introduction Provides an overview of your research, its purpose, and any relevant background information.
• Methods/ Approach Gives an outline of the methods used to conduct your research.
• Results Summarizes your findings.
• Conclusions Provides an overview of your research's accomplishments and implications.
• Keywords Includes keywords that accurately describe your thesis.

Below is an example that shows how a dissertation abstract looks, how to structure it and where each part is located. Use this template to organize your own summary. 

Things to Consider Before Writing a Dissertation Abstract

There are several things you should do beforehand in order to write a good abstract for a dissertation or thesis. They include:

• Reviewing set requirements and making sure you clearly understand the expectations
• Reading other research works to get an idea of what to include in yours
• Writing a few drafts before submitting your final version, which will ensure that it's in the best state possible.

Write an Abstract for a Dissertation Last

Remember, it's advisable to write an abstract for a thesis paper or dissertation last. Even though it’s always located in the beginning of the work, nevertheless, it should be written last. This way, your summary will be more accurate because the main argument and conclusions are already known when the work is mostly finished - it is incomparably easier to write a dissertation abstract after completing your thesis. Additionally, you should write it last because the contents and scope of the thesis may have changed during the writing process. So, create your dissertation abstract as a last step to help ensure that it precisely reflects the content of your project.

Carefully Read Requirements

Writing dissertation abstracts requires careful attention to details and adherence to writing requirements. Refer to the rubric or guidelines that you were presented with to identify aspects to keep in mind and important elements, such as correct length and writing style, and then make sure to comprehensively include them. Careful consideration of these requirements ensures that your writing meets every criterion and standard provided by your supervisor to increase the chances that your master's thesis is accepted and approved.   

Choose the Right Type of Dissertation Abstracts

Before starting to write a dissertation or thesis abstract you should choose the appropriate type. Several options are available, and it is essential to pick one that best suits your dissertation's subject. Depending on their purpose, there exist 3 types of dissertation abstracts: 

• Informative
• Descriptive

Informative one offers readers a concise overview of your research, its purpose, and any relevant background information. Additionally, this type includes brief summaries of all results and dissertation conclusions .  A descriptive abstract in a dissertation or thesis provides a quick overview of the research, but it doesn't incorporate any evaluation or analysis because it only offers a snapshot of the study and makes no claims.

Critical abstract gives readers an in-depth overview of the research and include an evaluative component. This means that this type also summarizes and analyzes research data, discusses implications, and makes claims about the achievements of your study. In addition, it examines the research data and recounts its implications. 

Choose the correct type of dissertation abstract to ensure that it meets your paper’s demands.

How to Write an Abstract for a Dissertation or Thesis?

Writing a good abstract for a dissertation or thesis is essential as it provides a brief overview of the completed research. So, how to write a dissertation abstract? First of all, the right approach is dictated by an institution's specific requirements. However, a basic structure should include the title, an introduction to your topic, research methodology, findings, and conclusions. Composing noteworthy precis allows you to flaunt your capabilities and grants readers a concise glimpse of the research. Doing this can make an immense impact on those reviewing your paper.

1. Identify the Purpose of Your Study

An abstract for thesis paper or dissertation is mainly dependent on the purpose of your study. Students need to identify all goals and objectives of their research before writing their précis - the reason being to ensure that the investigation’s progress and all its consequent findings are described simply and intelligibly. Additionally, one should provide some background information about their study. A short general description helps your reader acknowledge and connect with the research question. But don’t dive too deep into details, since more details are provided when writing a dissertation introduction . Scholars should write every dissertation abstract accurately and in a coherent way to demonstrate their knowledge and understanding of the area. This is the first section that potential readers will see, and it should serve as a precise overview of an entire document. Therefore, researchers writing abstracts of a thesis or dissertation should do it with great care and attention to details.

2. Discuss Methodology

A writer needs to elaborate on their methodological approach in an abstract of PhD dissertation since it acts as a brief summary of a whole research and should include an explanation of all methods used there. Dissertation and thesis abstracts discuss the research methodology by providing information sufficient enough to understand the underlying research question, data collection methods, and approach employed. Additionally, they should explain the analysis or interpretation of the data. This will help readers to gain a much better understanding of the research process and allow them to evaluate the data quality. Mention whether your methodology is quantitative or qualitative since this information is essential for readers to grasp your study's context and scope. Additionally, comment on the sources used and any other evidence collected. Furthermore, explain why you chose the method in the first place. All in all, addressing methodology is a crucial part of writing abstracts of a thesis or dissertation, as it will allow people to understand exactly how you arrived at your conclusions.

3. Describe the Key Results

Write your abstract for dissertation in a way that includes an overview of the research problem, your proposed solution, and any limitations or constraints you faced. Students need to briefly and clearly describe all key findings from the research. You must ensure that the results mentioned in an abstract of a thesis or dissertation are supported with evidence from body chapters.  Write about any crucial trends or patterns that emerged from the study. They should be discussed in detail, as this information can often provide valuable insight into your topic. Be sure to include any correlations or relationships found as a result of the study. Correlation, in this context, refers to any association between two or more variables.  Finally, write about any implications or conclusions drawn from your results: this is an essential element when writing an abstract for dissertation since it allows readers to firmly comprehend the study’s significance.

4. Summarize an Abstract for a Dissertation

Knowing how to write an abstract for dissertation is critical in conveying your work to a broad audience. Summarizing can be challenging (since precis is a summary in itself), but it is an essential part of any successful work. So, as a final step, conclude this section with a brief overview of the topic, outline the course of your research and its main results, and answer the paper’s central question.  Summarizing an abstract of your dissertation is done to give readers a succinct impression of the entire paper, making an accurate and concise overview of all its key points and consequent conclusions. In every PhD dissertation abstract , wrap up its summary by addressing any unanswered questions and discussing any potential implications of the research.

How to Format an Abstract in Dissertation

Format depends on the style (APA, MLA, Harvard, Chicago), which varies according to your subject's discipline. Style to use is usually mentioned in the instructions, and students should follow them closely to ensure formatting accuracy. These styles have guidelines that inform you about the formatting of titles, headings and subheadings, margins, page numbers, abstracts, and tell what font size and family or line spacing are required. Using a consistent formatting style ensures proper readability and might even influence paper’s overall structure. Another formatting concern to consider when writing dissertation and thesis abstracts is their layout. Most commonly, your paper should have a one-inch margin on all sides with double spacing. Be sure to familiarize yourself with the right guidelines to get the correct information on how to write dissertation abstract in APA format and ensure that it meets formatting standards.

Keywords in a Dissertation Abstract

When writing thesis abstracts, it is essential to include keywords. Keywords are phrases or words that help readers identify main topics of your paper and make it easier for them to find any information they need. Keywords should usually be placed at the end of a dissertation abstract and written in italics. In addition, include keywords that represent your paper's primary research interests and topics. Lastly, use keywords throughout your thesis to ensure that your précis accurately reflect an entire paper's content.

Thesis and Dissertation Abstract Examples

When writing, checking out thesis and dissertation abstracts examples from experts can provide a valuable reference point for structuring and formatting your own précis. When searching for an excellent sample template, engaging the assistance of a professional writer can be highly beneficial. Their expertise and knowledge offer helpful insight into creating an exemplary document that exceeds all expectations. Examples of dissertation abstracts from different topics are commonly available in scholarly journals and websites. We also encourage you to go and search your university or other local library catalogue -  multiple useful samples can surely be found there. From our part, we will attach 2 free examples for inspiration.

Dissertation abstract example

Thesis abstract example

Need a custom summary or a whole work? Contact StudyCrumb and get proficient assistance with PhD writing or dissertation proposal help .

Extra Tips on Writing a Dissertation Abstract

Writing a dissertation or PhD thesis abstract is not an easy task. You must ensure that it accurately reflects your paper's content. In this context, we will provide top-class tips on how to write an abstract in a dissertation or thesis for you to succeed. Combined with an example of a dissertation abstract above, you can rest assured that you'll do everything correctly. Below are extra tips on how to write a thesis abstract:

• Keep it concise, not lengthy - around 300 words.
• Focus on the “what”, “why”, “how”, and “so what” of your research.
• Be specific and concrete: avoid generalization.
• Use simple language: précis should be easy to understand for readers unfamiliar with your topic.
• Provide enough relevant information so your readers can grasp a main idea without necessarily reading your paper in its entirety.
• Write and edit your abstract several times until every sentence is clear and concise.
• Verify accuracy: make sure that précis reflect your content precisely.

Bottom Line on How to Write a Dissertation or Thesis Abstract

The bottom line when it comes to how to write a dissertation abstract is that you basically need to mirror your study's essence on a much lower scale. Specifically, students should keep their précis concise, use simple language, include relevant information, and write several drafts. Don't forget to review your précis and make sure they are precise enough. In addition, make sure to include all keywords so readers can find your paper quickly. You are encouraged to examine several sample dissertation abstracts to understand how to write your own.

Are you still struggling with your abstract? Contact our dissertation writing service and our qualified writers will gladly help you with this uneasy task. They will make sure it is delivered strictly on time and meets all requirements!  

FAQ About Dissertation Abstract Writing

1. why is a dissertation abstract important.

Dissertation abstracts are important because they give readers a brief overview of your research. They succinctly introduce critical information and study’s key points to help readers decide if reading your thesis is worth their time. During indexing, an abstract allows categorizing and filtering papers through keyword searches. Consequently, this helps readers to easily find your paper when searching for information on a specific topic.

2. When should I write an abstract for a dissertation or thesis?

You are supposed to write a dissertation or thesis abstract after completing research and finishing work on your paper. This way, you can write précis that accurately reflects all necessary information without missing any important details. Writing your thesis précis last also lets you provide the right keywords to help readers find your dissertation.

3. What should a dissertation abstract include?

A dissertation abstract should include a research problem, goals and objectives, methods, results, and study implications. Ensure that you incorporate enough information so readers can get an idea of your thesis's content without reading it through. Use relevant keywords to ensure readers can easily find your paper when searching for information on a specific topic.

4. How to write a strong dissertation abstract?

To write a strong abstract for a dissertation, you should state your research problem, write in an active voice, use simple language, and provide relevant information. Additionally, write and edit your précis several times until it is clear and concise, and verify that it accurately mirrors your paper’s content. Reviewing several samples is also helpful for understanding how to write your own.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like

Does my Dissertation Need an Abstract?

Writing the Abstract

• First Online: 19 October 2023

Cite this chapter

• Sue Reeves   ORCID: orcid.org/0000-0002-3017-0559 3 &
• Bartek Buczkowski   ORCID: orcid.org/0000-0002-4146-3664 4  

429 Accesses

The abstract is written when all the other elements of your dissertation or thesis are completed, and you know the story of your research. The abstract is a concise yet informative summary of your research. In this chapter, we explore the purpose of the abstract, its contents, guidance as to the different elements that are included, and differences between structured and unstructured abstracts. A checklist for writing the abstract is provided.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Subscribe and save.

• Get 10 units per month
• Download Article/Chapter or Ebook
• 1 Unit = 1 Article or 1 Chapter
• Cancel anytime
• Available as EPUB and PDF
• Read on any device
• Instant download
• Own it forever
• Compact, lightweight edition
• Dispatched in 3 to 5 business days
• Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Further Reading

Willis M (2023) Read this before you write your abstract. Times higher education. Available at: https://www.timeshighereducation.com/campus/read-you-write-your-abstract . Accessed on 4 March 2023.

Download references

Author information

Authors and affiliations.

University of Roehampton, London, UK

Manchester Metropolitan University, Manchester, UK

Bartek Buczkowski

You can also search for this author in PubMed   Google Scholar

Rights and permissions

Reprints and permissions

Copyright information

© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG

About this chapter

Reeves, S., Buczkowski, B. (2023). Does my Dissertation Need an Abstract?. In: Mastering Your Dissertation. Springer, Cham. https://doi.org/10.1007/978-3-031-41911-9_12

Download citation

DOI : https://doi.org/10.1007/978-3-031-41911-9_12

Published : 19 October 2023

Publisher Name : Springer, Cham

Print ISBN : 978-3-031-41910-2

Online ISBN : 978-3-031-41911-9

eBook Packages : Biomedical and Life Sciences Biomedical and Life Sciences (R0)

Share this chapter

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Publish with us

Policies and ethics

• Find a journal
• Track your research

• Updated 18 April 2024
• Published 24 December 2022

Dissertation Abstract | Tips and Examples

Table of contents.

The abstract is part of the series on how to write your dissertation . An abstract is a short summary that outlines all important parts of your research. It is situated in between the acknowledgements and table of content . It is slightly different from a summary that only states what the research is about; an abstract also explores the findings.

Why write an abstract?

Abstracts play a crucial role in the selection and indexing of academic articles.

Selection: A well-written abstract not only assists readers in determining whether the content is relevant to their interests but also helps them decide if they should read the entire paper.

Indexing: Moreover, academic journal databases incorporated by library facilities can be explored through abstracts, allowing for swift retrieval of information. It’s essential for abstracts to include the key terms that a researcher might use to perform their search easily. Therefore, a meticulously written abstract strengthens the visibility of the paper in the academic community and the chances of being cited by potential users.

What to include in an abstract

The structure of an abstract is similar to the rest of your dissertation, but it does depend on the discipline in which you are working. However, all abstracts cover the following five sections:

1. Reasons for writing

You’ll have to think of what is important to the research. You can highlight the existing gap in the current knowledge that your research aims to address. Explain how filling this gap will advance knowledge, provide a more comprehensive understanding of the topic or resolve contradictions in the existing literature. You can also discuss the limitations and shortcomings of existing studies and how they create a need for further investigation.

Clearly state the specific research questions or objectives that your study aims to answer or achieve. Highlight how these questions align with the identified research gap and emphasize the novelty or significance of your research in addressing these questions.

These questions might help you: What problem does this work attempt to solve? What is the scope of the project? What is the main argument, thesis or claim?

3. Methodology

An abstract should provide a concise overview of the methods employed to address the research question. While it is not necessary to delve into the intricacies of validity or reliability, it is important to offer a glimpse of the approach taken to give the reader an understanding of the study’s design. Some important questions you can address here are:

• What did your sample consist of?
• How did you collect the data?
• How did you analyze your data?

Try highlight the key results of your research, as the space is limited. Brevity and clarity are key.

5. Implications

How does this work add to the body of knowledge on the topic? Are there any practical or theoretical applications from your findings or implications for future research?

Types of abstracts

Abstracts can be informative, descriptive or critical. It is essential you pick the right type for your dissertation subject.

The majority of written abstracts are Informative . These type of abstracts offer the reader a concise overview of your research, including the principle results and conclusion.

Descriptive abstracts describe the work being abstracted. They are more like an outline of the work and are usually very short – 100 words or less.

A critical abstract offers readers a comprehensive overview of the research while incorporating an evaluative component. It not only summarizes the research data but also analyzes it, discusses the implications, and asserts the accomplishments of the study. This type of abstract goes beyond mere description by critically examining the research data and recounting its significance and broader implications.

Keywords in abstracts

When crafting thesis abstracts, the inclusion of keywords is paramount. Keywords are phrases or words that assist readers in identifying the main topics addressed in your paper, making it more convenient for them to locate specific information. Typically, keywords should be positioned at the conclusion of the dissertation abstract and formatted in italics. Furthermore, incorporate keywords that encapsulate the primary research interests and topics explored in your paper. Lastly, employ these keywords throughout your thesis to ensure that your abstracts accurately reflect the content of the entire paper.

In addition to the aforementioned points, it is important to consider the following aspects when selecting and utilizing keywords in your thesis abstract:

Relevance and Specificity: Choose keywords that accurately represent the core themes, concepts, and objectives of your research. Opt for precise and specific terms that succinctly capture the essence of your work. This aids in ensuring that your abstracts align closely with the content of your paper and attract readers interested in those particular areas.

Variation and Synonyms: Include a range of related keywords to accommodate different reader preferences and search strategies. Consider using synonyms or alternative expressions that convey the same or similar meanings. This expands the visibility of your abstracts and improves the likelihood of your work being discovered by individuals searching for different terminology.

Field-specific Terminology: Incorporate keywords that are commonly used within your specific field or discipline. By including domain-specific terminology, you increase the chances of your paper being recognized and accessed by researchers and practitioners in your area of study.

Research Methodology or Approach: If applicable, include keywords that denote the specific research methodologies or approaches utilized in your study. This can encompass quantitative or qualitative methods, experimental designs, data analysis techniques, or theoretical frameworks employed in your research.

Emerging or Important Concepts: Identify and include keywords that highlight emerging or significant concepts within your research area. This allows your work to be associated with cutting-edge developments and relevant discussions in the field, increasing its visibility and attracting interest from scholars and researchers engaged in those areas.

By incorporating these considerations into your selection and use of keywords, your thesis abstracts become more effective in conveying the main topics of your paper, facilitating discoverability, and attracting readers with specific interests in your research.

Examples of abstracts

(Example 1)

This dissertation presents a theoretical study of the properties of quantum systems in the presence of strong external fields. We developed a new approach to analyze the effects of intense laser fields on the dynamics and spectra of small atomic and molecular systems. Our calculations show that the strong-field ionization and high-order harmonic generation processes can be accurately described by the solutions of the time-dependent Schrödinger equation in the framework of a semi-classical model. We also found that the non-perturbative effects of the laser-dressed states lead to a significant modification of the electron-ion recombination rates and the high-order harmonic spectra. The results of this study have important implications for the development of new techniques for the control and manipulation of quantum systems in strong-field physics and attosecond science.

Keywords : Quantum Systems, Strong External Fields, Intense Laser Fields, Time-dependent Schrödinger Equation, Laser-dressed States

(Example 2)

This dissertation examines the impact of parental involvement on academic achievement among low-income minority students. Using a mixed-methods approach, the study surveyed 300 parents and conducted in-depth interviews with 20 parents and 20 teachers in three urban schools. The findings indicate that parental involvement, specifically in the areas of communication with teachers, volunteering at school, and monitoring of homework, is positively associated with academic achievement. Additionally, teachers reported that parental involvement improved their ability to provide individualized support for students. The study also found that cultural and linguistic barriers, as well as lack of access to resources, can impede parental involvement. The results of this research highlight the importance of parental involvement in the academic success of low-income minority students and provide insights for educators and policymakers to improve family-school partnerships.

Keywords: Parental Involvement, Low-income Minority Students, Mixed-Methods Approach, Family-School partnerships

Writing a dissertation or PhD thesis abstract is a challenging endeavor that requires careful attention to ensure its alignment with the content of your paper. To assist you, I offer some extra tips on writing an abstract for your dissertation or thesis. Coupled with the example of a dissertation abstract provided above, you can proceed with confidence, knowing that you are following the correct approach.

• Keep the abstract concise, with no more then 300 words.
• Be specific and concrete.
• You can add keywords in white font color, that won’t be read by the reader, but the compiler will pick them up.
• Use words such as “Investigate”, “Analyze” or “Evaluate” to describe the research’s actions.
• Write in the present simple tense, unless you are talking about events (e.g. data collecting) that took place in the past; than use past simple tense.
• Why: The reason behind the research being done.
• How: The basic approach and methodology, usually in one sentence.
• What: The main findings (results) in very few sentences.
• So what: The conclusion (briefly) and the broad implications of it.
• It is slightly different from a summary that only states what the research is about; an abstract also explores the findings.

Free All-in-One Office Suite with PDF Editor

Edit Word, Excel, and PPT for FREE.

Read, edit, and convert PDFs with the powerful PDF toolkit.

Microsoft-like interface, easy to use.

Windows • MacOS • Linux • iOS • Android

Select areas that need to improve

• Didn't match my interface
• Too technical or incomprehensible
• Incorrect operation instructions
• Incomplete instructions on this function

Fields marked * are required please

Please leave your suggestions below

• Quick Tutorials
• Practical Skills

How to Write an Abstract - Steps with Examples

Writing reports, papers, and assignments is a significant part of college life, and it often involves complex writing and analysis. One of the most challenging aspects can be crafting an effective abstract. After completing your report, summarizing it concisely can seem daunting. In this guide, I’ll walk you through how to write an abstract for paper that clearly and effectively summarizes your work, making it easier for your readers to grasp the main points.

What to Include & How to Structure Your Abstract?

A.what to include.

An abstract serves as a concise summary of a research paper, providing readers with a quick overview of its essential aspects. It typically begins by setting the context and significance of the research, outlining the broader field and specific topic under study. Central to the abstract is a clear articulation of the research question or problem that the study addresses, emphasizing its relevance and importance within the discipline. Building upon existing literature, the abstract succinctly summarizes previous research while highlighting gaps or limitations that motivate the current study.

Context or Background: Briefly introduce the general and specific topics of your research.

Central Question or Problem: Clearly state the research question or problem addressed.

Previous Research: Summarize what is already known and highlight gaps or limitations.

Methods: Outline the research or analytical methods used.

Findings: Present the main findings or arguments.

Significance: Explain the implications or significance of your findings.

B.How to Structure

Introduction:

Begin with a sentence that sets the context and importance of your research topic.

Briefly mention the specific aspect of the topic that your paper focuses on.

Provide a concise summary of the methods used in your study.

Mention any unique approaches or innovations in your methodology.

Summarize the most significant findings of your research.

Highlight any unexpected results or patterns observed.

Conclusion:

Conclude with the significance of your findings.

Discuss how your research contributes to the field and suggest areas for future study.

C.Things to Avoid

Citing References: Avoid including citations or detailed literature reviews.

Detailed Explanations: Keep descriptions of methods and data concise.

Jargon and Technical Language: Use clear and accessible language to ensure understanding

Types of Abstract

There are two primary types of abstracts: descriptive and informative.

1.Descriptive Abstract:

A descriptive abstract provides a brief overview of the purpose and scope of the research without delving into specific details of findings or conclusions. It aims to give readers a snapshot of what the paper is about.

An example of a descriptive abstract would be where in a study analyzing economic homogamy among spouses, a descriptive abstract might introduce the topic and outline the general findings about increasing economic resemblance between partners without specifying the detailed methods or specific results.

2.Informative Abstract:

An informative abstract offers a comprehensive summary of the entire research paper, including the purpose, methods, results, and conclusions. It provides readers with a clear understanding of the study's objectives and outcomes.

For instance, in a research paper on reprogramming fibroblasts into induced cardiac progenitor cells, an informative abstract would detail the methods used (such as specific gene factors and signaling pathways), summarize the main findings (including the types of cells generated and their potential applications), and discuss the broader implications for cardiac regenerative therapy.

Both types of abstracts serve distinct purposes: descriptive abstracts give a broad overview suitable for quickly understanding the topic, while informative abstracts provide detailed insights into the research, making them ideal for readers seeking in-depth knowledge without reading the full paper.

How to Write an Abstract for paper in 4 Steps [With Examples]

Now that we know an abstract is simply a concise summary of our entire research, the next step is to learn how to write an abstract for a research paper. Remember, the structure of an abstract needs to be followed strictly, and it should be within 300 words to ensure it is impactful and fulfills its purpose. The structure includes:

Problem Statement (1-2 sentences)

Methodology (1-2 sentences)

Results (2-3 sentences)

Significance (1-2 sentences)

With this structure in mind, I will be writing an abstract on the topic 'Ethical Implications of Facial Recognition Technology in Public Surveillance'. To assist me, I will be using WPS Writer as my writing tool because it not only provides me with the necessary editing tools for writing my research paper but also utilizes WPS AI to save time and enhance the meaning of my abstract.

Problem Statement

So first of all, in an abstract, we have the Problem Statement. A problem statement, or research gap, serves as a concise description of the issue or challenge addressed in the research. Students and researchers often end up writing line after line when discussing the research gap, although just 1-2 lines will suffice.

Let's take a look at the draft I have written for the problem statement on WPS Writer.

To shorten this problem statement effectively while ensuring it describes the issue concisely, I'll use WPS AI for assistance. Here's how:

Step 1: Highlight the problem statement using your mouse.

Step 2: After highlighting the text, you will see a floating menu with quick edit tools. Click on the "WPS AI" icon.

Step 3: Upon clicking the WPS AI icon, a list of WPS AI options will appear. Select "Make Shorter".

Step 4: WPS AI will process the text, and once shortened, review it. If satisfactory, click “Replace”; otherwise, opt for “Rewrite” to refine further.

Step 5: With the problem statement shortened, I'll add a human touch by making final adjustments before moving to the next part of our abstract.

Methodology

Next up, we need to discuss the methods used during our research. This includes outlining the specific techniques, procedures, or approaches employed to gather data and analyze findings, ensuring transparency and replicability in scholarly work.

And now, with the help of WPS AI, I'll be shortening my methodology statement to make it more concise and fit my abstract.

Ensure to review any changes made because WPS AI is a writing assistant designed to help you write better, but reviewing is critical to ensure the end result meets your expectations.

After discussing the methodology, we present the results of our research. This section summarizes the key findings and outcomes obtained through the applied methods, providing a clear picture of what was discovered or achieved.

Similar to other sections, I have created a rough draft of my research findings, which I believe are important to include in my abstract.

Now with the assistance of WPS AI, I can further condense my draft. Remember, results can be a bit longer compared to other sections of our abstract, so I'll aim for 2-3 sentences to maintain relevance.

Significance

Finally, we need to discuss the significance of our research and its contributions to the field. This involves explaining how our findings will impact the topic of research and provide a foundation for future studies.

With my significance statement further shortened using WPS AI, I now have my complete abstract statement totaling over 220 words, providing a brief overview of my entire research.

Once you have completed writing your abstract, the next step is to include keywords—a crucial element in learning how to write an abstract for a project or research paper in APA style. When publishing your paper, it's essential to include these keywords at the end of the abstract.

They should highlight important aspects of your research, aiding readers in finding your paper during literature searches. APA Style guidelines specify the formatting rules for these keywords, ensuring consistency and clarity in scholarly publications.

Place keywords directly below the abstract.

Indent the first line of keywords by 0.5 inches.

Use an italicized heading for "Keywords:"

Separate each keyword with a comma and maintain standard font style for keywords.

Remember, the abstract is written once the entire research paper has been completed, so it is the final step before you submit your research paper for publication or to your college professor.

When inputting keywords, think from a reader's perspective about what they are searching for, and include those search terms as your keywords.

While writing your abstract, remember that your research findings are already completed, so the abstract is always in the present or past simple tense.

Avoid delving deeply into the problem when describing your problem statement.

Use verbs like "investigate, test, analyze, evaluate, calculate" to describe the purpose of your research.

In the results section, highlight the most important findings because sometimes research findings are extensive and it might leave you confused about which ones to include.

Mention any limitations encountered during your research.

Bonus Tips: How to Perfect your Abstract with WPS AI

When crafting your essay with WPS AI, you're setting yourself up for success. WPS AI offers a suite of tools designed to elevate your writing to new heights, ensuring your paper is not only well-written but also perfectly formatted and crystal clear. Whether you're brainstorming ideas or fine-tuning your final draft, WPS AI is your comprehensive writing assistant.

Content Generation and Idea Formation:

WPS AI aids in generating and refining ideas, helping you structure your thoughts cohesively. It provides guidance on developing strong arguments and organizing your essay logically, ensuring your content flows smoothly.

Grammar and Style Correction:

WPS AI acts as a meticulous proofreader, detecting and correcting grammatical errors, punctuation mistakes, and stylistic inconsistencies. It ensures your writing adheres to standard grammar rules and enhances readability.

Coherence Enhancement:

Beyond surface-level corrections, WPS AI enhances the coherence of your writing. It identifies areas where transitions between paragraphs or ideas could be smoother, ensuring your paper maintains a clear and logical progression of thought.

Clarity Check:

Clarity is paramount in effective writing. WPS AI evaluates the clarity of your sentences and paragraphs, suggesting improvements to eliminate ambiguity and enhance understanding. It helps refine your tone and ensures your message is conveyed effectively to your audience.

Formatting Assistance:

Formatting can often be a tedious task. WPS AI automates the process, ensuring your paper meets the required formatting guidelines effortlessly. Whether it's APA, MLA, Chicago, or any other style, WPS AI ensures your paper looks polished and professional.

Real-time Feedback and Iterative Improvement:

As you write, WPS AI provides real-time feedback, offering suggestions for improvement as you draft your essay. This iterative process allows you to refine your writing continuously, incorporating feedback on the go.

FAQs about writing an abstract for paper

1. is it necessary for an abstract to adhere to a standard structure.

No, an abstract does not always need to follow a standard structure. While a standard format offers familiarity, focusing on the most compelling aspects of your research is crucial. Here are some key points to keep in mind:

Significant Discoveries: If your research unveils groundbreaking results, prioritizing these can immediately capture attention, even if it diverges slightly from the traditional structure.

Innovative Method: Highlighting a fresh or distinct approach from the outset can captivate readers interested in your research methodology.

2. Does the use of technical jargon in an Abstract enhance the reader's comprehension?

Using too much technical language in an abstract usually doesn't help readers. Here's why it might cause trouble:

Excludes Readers: An excessive use of jargon can create a barrier, potentially alienating readers who could otherwise benefit from your research.

Hides Important Ideas: Sometimes, technical language makes it hard to understand your thoughts clearly. Utilizing clear and everyday language enhances your ability to communicate complex ideas effectively.

When to Incorporate Technical Language:

Clarify Terms: If technical terms are necessary, provide clear explanations upon their initial use.

Maintain Balance: Strive for clarity while demonstrating proficiency in the technical vocabulary of your field.

3. When should I write the Abstract?

Once you've finished your research, write the abstract as the final step. This allows you to concisely summarize your entire thesis, dissertation, or research paper, capturing all its main points and findings.

4. How long should an Abstract be?

Abstract lengths for theses and dissertations typically range between 200 and 300 words. Many universities enforce strict word limits, so it's crucial to check your institution's specific requirements before submitting your abstract.

Ease Your Academic Life With WPS Office

Writing a paper can be a challenging journey, but when you're creating your abstract, you're figuratively and literally wrapping it up. WPS Office is a great companion to have on this journey. From generating ideas to perfecting your final draft, WPS AI equips you with the tools and guidance on how to write an abstract for paper. It ensures that your essay not only meets academic standards but also stands out for its coherence, clarity, and impeccable presentation. Download WPS Office now and make your academic life easier.

• 1. How to Write a Research Paper [Steps & Examples]
• 2. 10 Professional Timeline in PPT Template From Abstract Cartoon Timelines to Business Timelines
• 3. How to Write a Conclusion - Steps with Examples
• 4. Simple Sample Abstract for Paper Presentation
• 5. How to Write a Cover Letter [Tips with Examples]
• 6. Professional Online Abstract of Presentation Example

15 years of office industry experience, tech lover and copywriter. Follow me for product reviews, comparisons, and recommendations for new apps and software.

Raptor Research Center

• Share on Facebook
• Share on Twitter
• Share on LinkedIn
• Share through Email
• Student & Alumni Updates

David Bontrager Thesis Defense

Boise State University MS Raptor Biology student David Bontrager defended his thesis, “Distribution of Great Horned Owls (Bubo virginianus) Near Breeding Grounds of the Reintroduced Northern Aplomado Falcon ( Falco femoralis septentrionalis ) at Laguna Atascosa National Wildlife Refuge in Coastal South Texas” midday on June 19, 2024. David Bontrager’s main advisor is Jen Cruz (Boise State University Raptor Research Center , Biological Sciences ) , and his committee also includes Jennifer McCabe (The Peregrine Fund) and Trevor Caughlin (Boise State University Biological Sciences).

Habitat change is the leading cause of species extinctions and declines worldwide. In addition to species losses, habitat changes can also alter species behavior, diet, and the way they interact with other species. Less than 1 % of coastal grasslands and prairies in Texas remain intact as a result of agriculture, urbanization, and woody plant encroachment. These habitat losses had bottom-up consequences, including the extirpations of multiple species that inhabited these ecosystems, such as the Northern Aplomado Falcon ( Falco femoralis septentrionalis ), Attwater’s Prairie Chicken ( Tympnuchus cupido attwateri ), and Pronghorn ( Antilocapra americana ). Further, areas with woody plant encroachment in the region may be benefiting Great Horned Owls ( Bubo virginianus ), a generalist predator that is known to predate fledgling Northern Aplomado Falcons. After its extirpation in 1952, the Northern Aplomado Falcon was reintroduced to the U.S. beginning in 1977, and a small, isolated breeding population currently persists along the South Texas coast. Here, we aimed to 1) compare separate single-method occupancy models against an integrated approach that combines two survey methods in a single model to make the most informed inference about Great Horned Owl distribution, and 2) determine the distribution of Great Horned Owls in relation to vegetation cover. During the winters of 2022 and 2023, we used callback surveys and autonomous recordings units at 65 survey points to determine the distribution of Great Horned Owls on Laguna Atascosa National Wildlife Refuge, an important breeding area in the U.S. for Northern Aplomado Falcons. The three occupancy models estimated owl distribution by relating owl occupancy to crop, grass, shrub, aquatic vegetation, and tall vegetation (> 3 m) cover, while accounting for imperfect detection. We found that the callback surveys provided more conservative estimates of owl occupancy and reliable relationships with habitat and therefore chose the callback-only model for further inference. Results from this model suggested that Great Horned Owls occupied areas with tall vegetation cover above 5%. Similarly, owls were more likely to occupy areas with shrub cover above 30%. Overall, Great Horned Owl distribution was widespread within the refuge, and nest cameras confirmed that owls come in close contact with nesting Northern Aplomado Falcons, with 4 of 10 cameras capturing owls perched or consuming prey on Northern  Aplomado Falcon artificial nest structures. Thus, results suggest that increases in woody plant encroachment likely benefited Great Horned Owls and that owls pose a major threat not only to adult falcons, but especially naïve, newly fledged young. Our findings can be used to inform where habitat restoration efforts should occur. We recommend prioritizing removal of woody plant encroachment in areas of high owl occupancy and near falcon nests to reduce the risk of predation. Furthermore, future Northern Aplomado Falcon release efforts should consider owl distribution and the level of tall vegetation and shrub cover when selecting release sites in order to maximize their survival. Reintroduction efforts of other species would also benefit from assessing how habitat changes may impact species interactions when returning a species to an altered landscape.

Design of support structures for offshore wind turbines

Contributors

To reference this document use:

Published Date

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

90-76468-11-7

To meet growing energy demands, the Kyoto protocol and the much desired diversification of supply, wind energy has become a mainstream source of energy in the EU. Cost wise it is already competing with gas fired electricity. In the last decade wind moved offshore to accommodate even more wind power. The offshore wind resource is more abundant and of a better quality, resulting in higher electricity output. On the other hand, the cost of installing turbines offshore is higher than onshore. To improve the cost-effectiveness of offshore wind, the risks involved must be known and mitigated and the critical design parameters must be optimised. From an engineering point of view, these requirements can be met through the following steps: - understand the basics of offshore wind turbines - apply lessons learned from previous projects - improve design tools. This thesis focuses on the design of the support structure. First, the basics of offshore engineering and of wind energy technology are summarized, specifically focused on the support structure design. Then, an overview is given of four actual offshore wind farm designs and their details. The design methods were compared mutually and with a design of a typical offshore oil platform. For most of the design steps, the methodology is consistent. Only the fatigue damage assessment is done differently for each individual project. Fatigue assessment in offshore engineering is done in the frequency domain. This method can be applied because the wave loads can be effectively linearized. The advantages of the frequency domain method are the clarity of presentation of intermediate results and the final outcome as well as the speed of calculation. The offshore wind industry standard (both onshore and offshore) is to use time domain simulations, which enables taking all non-linearities of the turbine operation into account. A disadvantage of this for the design of support structures is that offshore contractors lack both the aerodynamic knowledge and knowledge of the turbine details to use the full time domain simulation method to calculate the total fatigue damage. In this thesis a frequency domain method is developed to solve this problem. An interface between turbine manufacturer and offshore contractor is created that avoids the need to transfer commercially sensitive turbine details. The offshore contractor can further optimise the support structures with the software packages he normally uses. The frequency domain method is tested for the Blyth offshore wind turbines, for which a validated computer model and on-site measurements were available. Further, the method is applied to a design for the Dutch offshore wind farm to be erected at Egmond in 2006. In both cases, the frequency domain method works very well and gives results that compare well with time domain results. The computer time required to perform a fatigue calculation has been reduced from several hours in the time domain to less than 2 minutes in the frequency domain. This high speed of calculation opens possibilities for parameter variations to check the sensitivity of design choices and for optimisation of every structure within the wind farm. This has the potential to significantly reduce cost and risk. A key issue in the accuracy of the method is the effect of the aerodynamic damping of the operating turbine on support structure dynamics. Several calculation methods for this damping have been tested and have shown to give reasonable results. More work is needed to more accurately pinpoint the magnitude of this aerodynamic damping. The frequency domain method is currently being implemented in the software of an offshore contractor while other companies have already shown interest.