skills lesson forming a valid hypothesis

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Methodology
• How to Write a Strong Hypothesis | Guide & Examples

How to Write a Strong Hypothesis | Guide & Examples

Published on 6 May 2022 by Shona McCombes .

A hypothesis is a statement that can be tested by scientific research. If you want to test a relationship between two or more variables, you need to write hypotheses before you start your experiment or data collection.

Table of contents

What is a hypothesis, developing a hypothesis (with example), hypothesis examples, frequently asked questions about writing hypotheses.

A hypothesis states your predictions about what your research will find. It is a tentative answer to your research question that has not yet been tested. For some research projects, you might have to write several hypotheses that address different aspects of your research question.

A hypothesis is not just a guess – it should be based on existing theories and knowledge. It also has to be testable, which means you can support or refute it through scientific research methods (such as experiments, observations, and statistical analysis of data).

Variables in hypotheses

Hypotheses propose a relationship between two or more variables . An independent variable is something the researcher changes or controls. A dependent variable is something the researcher observes and measures.

In this example, the independent variable is exposure to the sun – the assumed cause . The dependent variable is the level of happiness – the assumed effect .

Prevent plagiarism, run a free check.

Step 1: ask a question.

Writing a hypothesis begins with a research question that you want to answer. The question should be focused, specific, and researchable within the constraints of your project.

Step 2: Do some preliminary research

Your initial answer to the question should be based on what is already known about the topic. Look for theories and previous studies to help you form educated assumptions about what your research will find.

At this stage, you might construct a conceptual framework to identify which variables you will study and what you think the relationships are between them. Sometimes, you’ll have to operationalise more complex constructs.

Step 3: Formulate your hypothesis

Now you should have some idea of what you expect to find. Write your initial answer to the question in a clear, concise sentence.

Step 4: Refine your hypothesis

You need to make sure your hypothesis is specific and testable. There are various ways of phrasing a hypothesis, but all the terms you use should have clear definitions, and the hypothesis should contain:

• The relevant variables
• The specific group being studied
• The predicted outcome of the experiment or analysis

Step 5: Phrase your hypothesis in three ways

To identify the variables, you can write a simple prediction in if … then form. The first part of the sentence states the independent variable and the second part states the dependent variable.

In academic research, hypotheses are more commonly phrased in terms of correlations or effects, where you directly state the predicted relationship between variables.

If you are comparing two groups, the hypothesis can state what difference you expect to find between them.

Step 6. Write a null hypothesis

If your research involves statistical hypothesis testing , you will also have to write a null hypothesis. The null hypothesis is the default position that there is no association between the variables. The null hypothesis is written as H 0 , while the alternative hypothesis is H 1 or H a .

Hypothesis testing is a formal procedure for investigating our ideas about the world using statistics. It is used by scientists to test specific predictions, called hypotheses , by calculating how likely it is that a pattern or relationship between variables could have arisen by chance.

A hypothesis is not just a guess. It should be based on existing theories and knowledge. It also has to be testable, which means you can support or refute it through scientific research methods (such as experiments, observations, and statistical analysis of data).

A research hypothesis is your proposed answer to your research question. The research hypothesis usually includes an explanation (‘ x affects y because …’).

A statistical hypothesis, on the other hand, is a mathematical statement about a population parameter. Statistical hypotheses always come in pairs: the null and alternative hypotheses. In a well-designed study , the statistical hypotheses correspond logically to the research hypothesis.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, May 06). How to Write a Strong Hypothesis | Guide & Examples. Scribbr. Retrieved 27 May 2024, from https://www.scribbr.co.uk/research-methods/hypothesis-writing/

Is this article helpful?

Shona McCombes

Other students also liked, operationalisation | a guide with examples, pros & cons, what is a conceptual framework | tips & examples, a quick guide to experimental design | 5 steps & examples.

• school Campus Bookshelves
• menu_book Bookshelves
• perm_media Learning Objects
• login Login
• how_to_reg Request Instructor Account
• hub Instructor Commons

Margin Size

• Download Page (PDF)
• Download Full Book (PDF)
• Periodic Table
• Physics Constants
• Scientific Calculator
• Reference & Cite
• Tools expand_more
• Readability

selected template will load here

This action is not available.

4.14: Experiments and Hypotheses

• Last updated
• Save as PDF
• Page ID 43806

\( \newcommand{\vecs}[1]{\overset { \scriptstyle \rightharpoonup} {\mathbf{#1}} } \)

\( \newcommand{\vecd}[1]{\overset{-\!-\!\rightharpoonup}{\vphantom{a}\smash {#1}}} \)

\( \newcommand{\id}{\mathrm{id}}\) \( \newcommand{\Span}{\mathrm{span}}\)

( \newcommand{\kernel}{\mathrm{null}\,}\) \( \newcommand{\range}{\mathrm{range}\,}\)

\( \newcommand{\RealPart}{\mathrm{Re}}\) \( \newcommand{\ImaginaryPart}{\mathrm{Im}}\)

\( \newcommand{\Argument}{\mathrm{Arg}}\) \( \newcommand{\norm}[1]{\| #1 \|}\)

\( \newcommand{\inner}[2]{\langle #1, #2 \rangle}\)

\( \newcommand{\Span}{\mathrm{span}}\)

\( \newcommand{\id}{\mathrm{id}}\)

\( \newcommand{\kernel}{\mathrm{null}\,}\)

\( \newcommand{\range}{\mathrm{range}\,}\)

\( \newcommand{\RealPart}{\mathrm{Re}}\)

\( \newcommand{\ImaginaryPart}{\mathrm{Im}}\)

\( \newcommand{\Argument}{\mathrm{Arg}}\)

\( \newcommand{\norm}[1]{\| #1 \|}\)

\( \newcommand{\Span}{\mathrm{span}}\) \( \newcommand{\AA}{\unicode[.8,0]{x212B}}\)

\( \newcommand{\vectorA}[1]{\vec{#1}}      % arrow\)

\( \newcommand{\vectorAt}[1]{\vec{\text{#1}}}      % arrow\)

\( \newcommand{\vectorB}[1]{\overset { \scriptstyle \rightharpoonup} {\mathbf{#1}} } \)

\( \newcommand{\vectorC}[1]{\textbf{#1}} \)

\( \newcommand{\vectorD}[1]{\overrightarrow{#1}} \)

\( \newcommand{\vectorDt}[1]{\overrightarrow{\text{#1}}} \)

\( \newcommand{\vectE}[1]{\overset{-\!-\!\rightharpoonup}{\vphantom{a}\smash{\mathbf {#1}}}} \)

Now we’ll focus on the methods of scientific inquiry. Science often involves making observations and developing hypotheses. Experiments and further observations are often used to test the hypotheses.

A scientific experiment is a carefully organized procedure in which the scientist intervenes in a system to change something, then observes the result of the change. Scientific inquiry often involves doing experiments, though not always. For example, a scientist studying the mating behaviors of ladybugs might begin with detailed observations of ladybugs mating in their natural habitats. While this research may not be experimental, it is scientific: it involves careful and verifiable observation of the natural world. The same scientist might then treat some of the ladybugs with a hormone hypothesized to trigger mating and observe whether these ladybugs mated sooner or more often than untreated ones. This would qualify as an experiment because the scientist is now making a change in the system and observing the effects.

Forming a Hypothesis

When conducting scientific experiments, researchers develop hypotheses to guide experimental design. A hypothesis is a suggested explanation that is both testable and falsifiable. You must be able to test your hypothesis, and it must be possible to prove your hypothesis true or false.

For example, Michael observes that maple trees lose their leaves in the fall. He might then propose a possible explanation for this observation: “cold weather causes maple trees to lose their leaves in the fall.” This statement is testable. He could grow maple trees in a warm enclosed environment such as a greenhouse and see if their leaves still dropped in the fall. The hypothesis is also falsifiable. If the leaves still dropped in the warm environment, then clearly temperature was not the main factor in causing maple leaves to drop in autumn.

In the Try It below, you can practice recognizing scientific hypotheses. As you consider each statement, try to think as a scientist would: can I test this hypothesis with observations or experiments? Is the statement falsifiable? If the answer to either of these questions is “no,” the statement is not a valid scientific hypothesis.

Practice Questions

Determine whether each following statement is a scientific hypothesis.

• No. This statement is not testable or falsifiable.
• No. This statement is not testable.
• No. This statement is not falsifiable.
• Yes. This statement is testable and falsifiable.

[reveal-answer q=”429550″] Show Answers [/reveal-answer] [hidden-answer a=”429550″]

• d: Yes. This statement is testable and falsifiable. This could be tested with a number of different kinds of observations and experiments, and it is possible to gather evidence that indicates that air pollution is not linked with asthma.
• a: No. This statement is not testable or falsifiable. “Bad thoughts and behaviors” are excessively vague and subjective variables that would be impossible to measure or agree upon in a reliable way. The statement might be “falsifiable” if you came up with a counterexample: a “wicked” place that was not punished by a natural disaster. But some would question whether the people in that place were really wicked, and others would continue to predict that a natural disaster was bound to strike that place at some point. There is no reason to suspect that people’s immoral behavior affects the weather unless you bring up the intervention of a supernatural being, making this idea even harder to test.

[/hidden-answer]

Testing a Vaccine

Let’s examine the scientific process by discussing an actual scientific experiment conducted by researchers at the University of Washington. These researchers investigated whether a vaccine may reduce the incidence of the human papillomavirus (HPV). The experimental process and results were published in an article titled, “ A controlled trial of a human papillomavirus type 16 vaccine .”

Preliminary observations made by the researchers who conducted the HPV experiment are listed below:

• Human papillomavirus (HPV) is the most common sexually transmitted virus in the United States.
• There are about 40 different types of HPV. A significant number of people that have HPV are unaware of it because many of these viruses cause no symptoms.
• Some types of HPV can cause cervical cancer.
• About 4,000 women a year die of cervical cancer in the United States.

Practice Question

Researchers have developed a potential vaccine against HPV and want to test it. What is the first testable hypothesis that the researchers should study?

• HPV causes cervical cancer.
• People should not have unprotected sex with many partners.
• People who get the vaccine will not get HPV.
• The HPV vaccine will protect people against cancer.

[reveal-answer q=”20917″] Show Answer [/reveal-answer] [hidden-answer a=”20917″]Hypothesis A is not the best choice because this information is already known from previous studies. Hypothesis B is not testable because scientific hypotheses are not value statements; they do not include judgments like “should,” “better than,” etc. Scientific evidence certainly might support this value judgment, but a hypothesis would take a different form: “Having unprotected sex with many partners increases a person’s risk for cervical cancer.” Before the researchers can test if the vaccine protects against cancer (hypothesis D), they want to test if it protects against the virus. This statement will make an excellent hypothesis for the next study. The researchers should first test hypothesis C—whether or not the new vaccine can prevent HPV.[/hidden-answer]

Experimental Design

You’ve successfully identified a hypothesis for the University of Washington’s study on HPV: People who get the HPV vaccine will not get HPV.

The next step is to design an experiment that will test this hypothesis. There are several important factors to consider when designing a scientific experiment. First, scientific experiments must have an experimental group. This is the group that receives the experimental treatment necessary to address the hypothesis.

The experimental group receives the vaccine, but how can we know if the vaccine made a difference? Many things may change HPV infection rates in a group of people over time. To clearly show that the vaccine was effective in helping the experimental group, we need to include in our study an otherwise similar control group that does not get the treatment. We can then compare the two groups and determine if the vaccine made a difference. The control group shows us what happens in the absence of the factor under study.

However, the control group cannot get “nothing.” Instead, the control group often receives a placebo. A placebo is a procedure that has no expected therapeutic effect—such as giving a person a sugar pill or a shot containing only plain saline solution with no drug. Scientific studies have shown that the “placebo effect” can alter experimental results because when individuals are told that they are or are not being treated, this knowledge can alter their actions or their emotions, which can then alter the results of the experiment.

Moreover, if the doctor knows which group a patient is in, this can also influence the results of the experiment. Without saying so directly, the doctor may show—through body language or other subtle cues—his or her views about whether the patient is likely to get well. These errors can then alter the patient’s experience and change the results of the experiment. Therefore, many clinical studies are “double blind.” In these studies, neither the doctor nor the patient knows which group the patient is in until all experimental results have been collected.

Both placebo treatments and double-blind procedures are designed to prevent bias. Bias is any systematic error that makes a particular experimental outcome more or less likely. Errors can happen in any experiment: people make mistakes in measurement, instruments fail, computer glitches can alter data. But most such errors are random and don’t favor one outcome over another. Patients’ belief in a treatment can make it more likely to appear to “work.” Placebos and double-blind procedures are used to level the playing field so that both groups of study subjects are treated equally and share similar beliefs about their treatment.

The scientists who are researching the effectiveness of the HPV vaccine will test their hypothesis by separating 2,392 young women into two groups: the control group and the experimental group. Answer the following questions about these two groups.

• This group is given a placebo.
• This group is deliberately infected with HPV.
• This group is given nothing.
• This group is given the HPV vaccine.

[reveal-answer q=”918962″] Show Answers [/reveal-answer] [hidden-answer a=”918962″]

• a: This group is given a placebo. A placebo will be a shot, just like the HPV vaccine, but it will have no active ingredient. It may change peoples’ thinking or behavior to have such a shot given to them, but it will not stimulate the immune systems of the subjects in the same way as predicted for the vaccine itself.
• d: This group is given the HPV vaccine. The experimental group will receive the HPV vaccine and researchers will then be able to see if it works, when compared to the control group.

Experimental Variables

A variable is a characteristic of a subject (in this case, of a person in the study) that can vary over time or among individuals. Sometimes a variable takes the form of a category, such as male or female; often a variable can be measured precisely, such as body height. Ideally, only one variable is different between the control group and the experimental group in a scientific experiment. Otherwise, the researchers will not be able to determine which variable caused any differences seen in the results. For example, imagine that the people in the control group were, on average, much more sexually active than the people in the experimental group. If, at the end of the experiment, the control group had a higher rate of HPV infection, could you confidently determine why? Maybe the experimental subjects were protected by the vaccine, but maybe they were protected by their low level of sexual contact.

To avoid this situation, experimenters make sure that their subject groups are as similar as possible in all variables except for the variable that is being tested in the experiment. This variable, or factor, will be deliberately changed in the experimental group. The one variable that is different between the two groups is called the independent variable. An independent variable is known or hypothesized to cause some outcome. Imagine an educational researcher investigating the effectiveness of a new teaching strategy in a classroom. The experimental group receives the new teaching strategy, while the control group receives the traditional strategy. It is the teaching strategy that is the independent variable in this scenario. In an experiment, the independent variable is the variable that the scientist deliberately changes or imposes on the subjects.

Dependent variables are known or hypothesized consequences; they are the effects that result from changes or differences in an independent variable. In an experiment, the dependent variables are those that the scientist measures before, during, and particularly at the end of the experiment to see if they have changed as expected. The dependent variable must be stated so that it is clear how it will be observed or measured. Rather than comparing “learning” among students (which is a vague and difficult to measure concept), an educational researcher might choose to compare test scores, which are very specific and easy to measure.

In any real-world example, many, many variables MIGHT affect the outcome of an experiment, yet only one or a few independent variables can be tested. Other variables must be kept as similar as possible between the study groups and are called control variables . For our educational research example, if the control group consisted only of people between the ages of 18 and 20 and the experimental group contained people between the ages of 30 and 35, we would not know if it was the teaching strategy or the students’ ages that played a larger role in the results. To avoid this problem, a good study will be set up so that each group contains students with a similar age profile. In a well-designed educational research study, student age will be a controlled variable, along with other possibly important factors like gender, past educational achievement, and pre-existing knowledge of the subject area.

What is the independent variable in this experiment?

• Sex (all of the subjects will be female)
• Presence or absence of the HPV vaccine
• Presence or absence of HPV (the virus)

[reveal-answer q=”68680″]Show Answer[/reveal-answer] [hidden-answer a=”68680″]Answer b. Presence or absence of the HPV vaccine. This is the variable that is different between the control and the experimental groups. All the subjects in this study are female, so this variable is the same in all groups. In a well-designed study, the two groups will be of similar age. The presence or absence of the virus is what the researchers will measure at the end of the experiment. Ideally the two groups will both be HPV-free at the start of the experiment.

List three control variables other than age.

[practice-area rows=”3″][/practice-area] [reveal-answer q=”903121″]Show Answer[/reveal-answer] [hidden-answer a=”903121″]Some possible control variables would be: general health of the women, sexual activity, lifestyle, diet, socioeconomic status, etc.

What is the dependent variable in this experiment?

• Sex (male or female)
• Rates of HPV infection
• Age (years)

[reveal-answer q=”907103″]Show Answer[/reveal-answer] [hidden-answer a=”907103″]Answer b. Rates of HPV infection. The researchers will measure how many individuals got infected with HPV after a given period of time.[/hidden-answer]

Contributors and Attributions

• Revision and adaptation. Authored by : Shelli Carter and Lumen Learning. Provided by : Lumen Learning. License : CC BY-NC-SA: Attribution-NonCommercial-ShareAlike
• Scientific Inquiry. Provided by : Open Learning Initiative. Located at : https://oli.cmu.edu/jcourse/workbook/activity/page?context=434a5c2680020ca6017c03488572e0f8 . Project : Introduction to Biology (Open + Free). License : CC BY-NC-SA: Attribution-NonCommercial-ShareAlike

Your browser is not supported

Sorry but it looks as if your browser is out of date. To get the best experience using our site we recommend that you upgrade or switch browsers.

Find a solution

• Skip to main content
• Skip to navigation

• Back to parent navigation item
• Collections
• Sustainability in chemistry
• Simple rules
• Teacher well-being hub
• Women in chemistry
• Global science
• Escape room activities
• Decolonising chemistry teaching
• Teaching science skills
• Post-lockdown teaching support
• Get the print issue
• RSC Education

• More from navigation items

Testing their assumptions

• No comments

Get your learners to prove they understand and can construct a hypothesis with this fair test – complete with variables

Source: © Tobatron

Narrow down the options to concentrate students’ thinking when they’re learning to write hypotheses

Science is all about discovery. However, this is not always the case in science education. While teaching science through discovery isn’t effective, teaching students skills to work scientifically, such as how to construct their own hypothesis from some simple observations, is important.

Teaching this can sometimes be problematic. Students find it hard to come up their own hypothesis, often because they lack the necessary knowledge of the topic and what a hypothesis is. I find that explicitly teaching how to construct a hypothesis helps my students.

Introducing the idea of a hypothesis

Previously when I taught the idea of constructing a hypothesis, I started with a definition of what a hypothesis is. Now, thanks to  Adam Boxer ’s alternative approach in his  book, Teaching secondary science , I prefer to leave the definition until after demonstrating what a hypothesis is, with a concrete example.

The example does not need to be complex. I prefer to use a simple rate of reaction experiment, such as dropping some magnesium in to a test tube of acid. I start with one concentration and one piece of magnesium. I ask students to turn to each other and talk about things I could do to make it effervesce more. They suggest a range of ideas and I pick one. I always pick concentration. We then discuss how we will know which concentration is better. I keep this qualitative as I want to make it as simple as possible. We discuss what concentration means and I draw two particle diagrams, one of a low concentration and one of a high concentration. I ask students whether they think a low or high concentration will be faster.

Download this

Candle investigation, for age range 11 –14.

Get learners developing a hypothesis and planning an investigation with this classroom activity.

Download the slides from the  Education in Chemistry website: rsc.li/3DcMcvp

Candle investigation, for age range 11–14

Get learners developing a hypothesis and planning an investigation with this classroom activity and worksheet.

Download the slides as PowerPoint and pdf , teacher notes as Word and pdf and student worksheet as Word and pdf .

Defining it

I write the hypothesis on the board while explaining in detail to the class what a hypothesis is. My modelling goes something like this: ‘We have decided to look into how changing the concentration affects the rate of reaction and we think a high concentration will be faster because there are more particles. Let’s write that down. This sentence explains what we think will happen and why. These types of sentences are very important in science. They are the foundation of all experiments. We call this sentence a hypothesis.’

Having established what a hypothesis is, you can use this example to specifically teach all sorts of skills for working scientifically. You can introduce the language of variables and the concept of fair testing.

Developing it

To allow students to develop their own hypotheses, it is worth starting with very narrow options. Help them to curate their initial hypothesis using two-part multiple choice questions . These allow students to decide from a very limited range the cause and effect needed for the hypothesis.

To allow students to develop their own hypotheses, it is worth starting with very narrow options. Help them to curate their initial hypothesis using two-part multiple choice questions, as described in the article, ’Strategies to boost learning in practicals’ (rsc.li/3GChGMF). These allow students to decide from a very limited range the cause and effect needed for the hypothesis.

Over time, you can increase the variety of options before opening it up for students to write their own. Even at this stage, I would not expect students to be completely independent. You can use mini whiteboards to get students to suggest and record variables that could be changed. Then ask them to pick from this list and construct their hypothesis. I would get them to do this on mini whiteboards too, as the stakes are lower. I then find great examples and share them with the class to support those who are struggling to understand.

Recommended reading and resources

• Use research-based tips to help learners form scientific questions. 
• Discover ideas for open investigations where learners can practise developing hypotheses with activities from  In search of solutions . 
• Explore the reactivity series of metals and displacement reactions with these  experiments and videos for 14–16 students , use the pause-and-think questions to discuss what is being tested and why. 
• Find out how senior principal scientist, Misbah uses computers to help make and test predictions about catalysts.
• Use research-based tips to help learners form scientific questions: rsc.li/3CWPLpn
• Discover ideas for open investigations where learners can practise developing hypotheses with activities from In search of solutions: rsc.li/3ZVG44G
• Explore the reactivity series of metals and displacement reactions with these experiments for 14–16 students: rsc.li/3HgA2Et
• Watch these practical videos with your 14–16 learners and use the pause-and-think questions to discuss what is being tested and why: rsc.li/3QNxlgx
• Find out how senior principal scientist, Misbah uses computers to help make and test predictions about catalysts: rsc.li/3wcBj99

When to teach about the hypothesis

Not all topics are well suited to teaching about the hypothesis. I am in favour of introducing it for ages 11–14 in topics to do with reactivity and displacement reactions. It is always preferable to map out the deliberate teaching of working scientifically skills. I like to map this in each year to ensure students get a chance to revisit it regularly.

Having a deliberate focus on what skill you want to develop in each practical is the most effective use of practical time in the lesson. This builds the skills and confidence students need to be successful scientists.

This article is part of our Teaching science skills series, bringing together strategies and classroom activities to help your learners develop essential scientific skills, from literacy to risk assessment and more.

More from Adam Robbins

How to build understanding of Gibbs free energy

Successfully stop disruptive behaviour in its tracks

Help students apply the right concepts in chemistry

• Applying scientific method
• Asking scientific questions
• Making predictions

Related articles

Escape the classroom: and revise chemistry knowledge

2024-05-03T09:21:00Z By Hayley Russell

Challenge your students to break out of the lab and prepare for exams

How to teach extraction of metals at 14–16

2024-04-09T07:20:00Z By Niall Begley

Solidify learners’ understanding of extraction processes with these tips, misconception busters and teaching ideas

Understanding how students untangle intermolecular forces

2024-03-14T05:10:00Z By Fraser Scott

Discover how learners use electronegativity to predict the location of dipole−dipole interactions 

No comments yet

Only registered users can comment on this article., more from ideas.

5 ways to use structure strips effectively

2024-05-08T05:08:00Z By Kristy Turner

Bolster your students’ ability to write independently with these effective strategies 

Fuel curiosity in science careers

2024-04-17T05:02:00Z By Mustafa Mahmoud

Help foster the next generation of scientists by linking teaching topics to real-world events and career pathways

Use AI to successfully assess students’ understanding

2024-03-20T05:00:00Z By David Paterson

Discover how to quickly and effectively generate multiple choice questions on key chemistry topics 

• Contributors
• Print issue
• Email alerts

Site powered by Webvision Cloud

• school Campus Bookshelves
• menu_book Bookshelves
• perm_media Learning Objects
• login Login
• how_to_reg Request Instructor Account
• hub Instructor Commons

Margin Size

• Download Page (PDF)
• Download Full Book (PDF)
• Periodic Table
• Physics Constants
• Scientific Calculator
• Reference & Cite
• Tools expand_more
• Readability

selected template will load here

This action is not available.

2.4: Developing a Hypothesis

• Last updated
• Save as PDF
• Page ID 16104

\( \newcommand{\vecs}[1]{\overset { \scriptstyle \rightharpoonup} {\mathbf{#1}} } \)

\( \newcommand{\vecd}[1]{\overset{-\!-\!\rightharpoonup}{\vphantom{a}\smash {#1}}} \)

\( \newcommand{\id}{\mathrm{id}}\) \( \newcommand{\Span}{\mathrm{span}}\)

( \newcommand{\kernel}{\mathrm{null}\,}\) \( \newcommand{\range}{\mathrm{range}\,}\)

\( \newcommand{\RealPart}{\mathrm{Re}}\) \( \newcommand{\ImaginaryPart}{\mathrm{Im}}\)

\( \newcommand{\Argument}{\mathrm{Arg}}\) \( \newcommand{\norm}[1]{\| #1 \|}\)

\( \newcommand{\inner}[2]{\langle #1, #2 \rangle}\)

\( \newcommand{\Span}{\mathrm{span}}\)

\( \newcommand{\id}{\mathrm{id}}\)

\( \newcommand{\kernel}{\mathrm{null}\,}\)

\( \newcommand{\range}{\mathrm{range}\,}\)

\( \newcommand{\RealPart}{\mathrm{Re}}\)

\( \newcommand{\ImaginaryPart}{\mathrm{Im}}\)

\( \newcommand{\Argument}{\mathrm{Arg}}\)

\( \newcommand{\norm}[1]{\| #1 \|}\)

\( \newcommand{\Span}{\mathrm{span}}\) \( \newcommand{\AA}{\unicode[.8,0]{x212B}}\)

\( \newcommand{\vectorA}[1]{\vec{#1}}      % arrow\)

\( \newcommand{\vectorAt}[1]{\vec{\text{#1}}}      % arrow\)

\( \newcommand{\vectorB}[1]{\overset { \scriptstyle \rightharpoonup} {\mathbf{#1}} } \)

\( \newcommand{\vectorC}[1]{\textbf{#1}} \)

\( \newcommand{\vectorD}[1]{\overrightarrow{#1}} \)

\( \newcommand{\vectorDt}[1]{\overrightarrow{\text{#1}}} \)

\( \newcommand{\vectE}[1]{\overset{-\!-\!\rightharpoonup}{\vphantom{a}\smash{\mathbf {#1}}}} \)

Learning Objectives

• Distinguish between a theory and a hypothesis.
• Discover how theories are used to generate hypotheses and how the results of studies can be used to further inform theories.
• Understand the characteristics of a good hypothesis.

Theories and Hypotheses

Before describing how to develop a hypothesis it is important to distinguish between a theory and a hypothesis. A theory is a coherent explanation or interpretation of one or more phenomena. Although theories can take a variety of forms, one thing they have in common is that they go beyond the phenomena they explain by including variables, structures, processes, functions, or organizing principles that have not been observed directly. Consider, for example, Zajonc’s theory of social facilitation and social inhibition. He proposed that being watched by others while performing a task creates a general state of physiological arousal, which increases the likelihood of the dominant (most likely) response. So for highly practiced tasks, being watched increases the tendency to make correct responses, but for relatively unpracticed tasks, being watched increases the tendency to make incorrect responses. Notice that this theory—which has come to be called drive theory—provides an explanation of both social facilitation and social inhibition that goes beyond the phenomena themselves by including concepts such as “arousal” and “dominant response,” along with processes such as the effect of arousal on the dominant response.

Outside of science, referring to an idea as a theory often implies that it is untested—perhaps no more than a wild guess. In science, however, the term theory has no such implication. A theory is simply an explanation or interpretation of a set of phenomena. It can be untested, but it can also be extensively tested, well supported, and accepted as an accurate description of the world by the scientific community. The theory of evolution by natural selection, for example, is a theory because it is an explanation of the diversity of life on earth—not because it is untested or unsupported by scientific research. On the contrary, the evidence for this theory is overwhelmingly positive and nearly all scientists accept its basic assumptions as accurate. Similarly, the “germ theory” of disease is a theory because it is an explanation of the origin of various diseases, not because there is any doubt that many diseases are caused by microorganisms that infect the body.

A hypothesis , on the other hand, is a specific prediction about a new phenomenon that should be observed if a particular theory is accurate. It is an explanation that relies on just a few key concepts. Hypotheses are often specific predictions about what will happen in a particular study. They are developed by considering existing evidence and using reasoning to infer what will happen in the specific context of interest. Hypotheses are often but not always derived from theories. So a hypothesis is often a prediction based on a theory but some hypotheses are a-theoretical and only after a set of observations have been made, is a theory developed. This is because theories are broad in nature and they explain larger bodies of data. So if our research question is really original then we may need to collect some data and make some observation before we can develop a broader theory.

Theories and hypotheses always have this if-then relationship. “ If drive theory is correct, then cockroaches should run through a straight runway faster, and a branching runway more slowly, when other cockroaches are present.” Although hypotheses are usually expressed as statements, they can always be rephrased as questions. “Do cockroaches run through a straight runway faster when other cockroaches are present?” Thus deriving hypotheses from theories is an excellent way of generating interesting research questions.

But how do researchers derive hypotheses from theories? One way is to generate a research question using the techniques discussed in this chapter and then ask whether any theory implies an answer to that question. For example, you might wonder whether expressive writing about positive experiences improves health as much as expressive writing about traumatic experiences. Although this question is an interesting one on its own, you might then ask whether the habituation theory—the idea that expressive writing causes people to habituate to negative thoughts and feelings—implies an answer. In this case, it seems clear that if the habituation theory is correct, then expressive writing about positive experiences should not be effective because it would not cause people to habituate to negative thoughts and feelings. A second way to derive hypotheses from theories is to focus on some component of the theory that has not yet been directly observed. For example, a researcher could focus on the process of habituation—perhaps hypothesizing that people should show fewer signs of emotional distress with each new writing session.

Among the very best hypotheses are those that distinguish between competing theories. For example, Norbert Schwarz and his colleagues considered two theories of how people make judgments about themselves, such as how assertive they are (Schwarz et al., 1991) [1] . Both theories held that such judgments are based on relevant examples that people bring to mind. However, one theory was that people base their judgments on the number of examples they bring to mind and the other was that people base their judgments on how easily they bring those examples to mind. To test these theories, the researchers asked people to recall either six times when they were assertive (which is easy for most people) or 12 times (which is difficult for most people). Then they asked them to judge their own assertiveness. Note that the number-of-examples theory implies that people who recalled 12 examples should judge themselves to be more assertive because they recalled more examples, but the ease-of-examples theory implies that participants who recalled six examples should judge themselves as more assertive because recalling the examples was easier. Thus the two theories made opposite predictions so that only one of the predictions could be confirmed. The surprising result was that participants who recalled fewer examples judged themselves to be more assertive—providing particularly convincing evidence in favor of the ease-of-retrieval theory over the number-of-examples theory.

Theory Testing

The primary way that scientific researchers use theories is sometimes called the hypothetico-deductive method (although this term is much more likely to be used by philosophers of science than by scientists themselves). A researcher begins with a set of phenomena and either constructs a theory to explain or interpret them or chooses an existing theory to work with. He or she then makes a prediction about some new phenomenon that should be observed if the theory is correct. Again, this prediction is called a hypothesis. The researcher then conducts an empirical study to test the hypothesis. Finally, he or she reevaluates the theory in light of the new results and revises it if necessary. This process is usually conceptualized as a cycle because the researcher can then derive a new hypothesis from the revised theory, conduct a new empirical study to test the hypothesis, and so on. As Figure 2.2 shows, this approach meshes nicely with the model of scientific research in psychology presented earlier in the textbook—creating a more detailed model of “theoretically motivated” or “theory-driven” research.

As an example, let us consider Zajonc’s research on social facilitation and inhibition. He started with a somewhat contradictory pattern of results from the research literature. He then constructed his drive theory, according to which being watched by others while performing a task causes physiological arousal, which increases an organism’s tendency to make the dominant response. This theory predicts social facilitation for well-learned tasks and social inhibition for poorly learned tasks. He now had a theory that organized previous results in a meaningful way—but he still needed to test it. He hypothesized that if his theory was correct, he should observe that the presence of others improves performance in a simple laboratory task but inhibits performance in a difficult version of the very same laboratory task. To test this hypothesis, one of the studies he conducted used cockroaches as subjects (Zajonc, Heingartner, & Herman, 1969) [2] . The cockroaches ran either down a straight runway (an easy task for a cockroach) or through a cross-shaped maze (a difficult task for a cockroach) to escape into a dark chamber when a light was shined on them. They did this either while alone or in the presence of other cockroaches in clear plastic “audience boxes.” Zajonc found that cockroaches in the straight runway reached their goal more quickly in the presence of other cockroaches, but cockroaches in the cross-shaped maze reached their goal more slowly when they were in the presence of other cockroaches. Thus he confirmed his hypothesis and provided support for his drive theory. (Zajonc also showed that drive theory existed in humans (Zajonc & Sales, 1966) [3] in many other studies afterward).

Incorporating Theory into Your Research

When you write your research report or plan your presentation, be aware that there are two basic ways that researchers usually include theory. The first is to raise a research question, answer that question by conducting a new study, and then offer one or more theories (usually more) to explain or interpret the results. This format works well for applied research questions and for research questions that existing theories do not address. The second way is to describe one or more existing theories, derive a hypothesis from one of those theories, test the hypothesis in a new study, and finally reevaluate the theory. This format works well when there is an existing theory that addresses the research question—especially if the resulting hypothesis is surprising or conflicts with a hypothesis derived from a different theory.

To use theories in your research will not only give you guidance in coming up with experiment ideas and possible projects, but it lends legitimacy to your work. Psychologists have been interested in a variety of human behaviors and have developed many theories along the way. Using established theories will help you break new ground as a researcher, not limit you from developing your own ideas.

Characteristics of a Good Hypothesis

There are three general characteristics of a good hypothesis. First, a good hypothesis must be testable and falsifiable . We must be able to test the hypothesis using the methods of science and if you’ll recall Popper’s falsifiability criterion, it must be possible to gather evidence that will disconfirm the hypothesis if it is indeed false. Second, a good hypothesis must be logical. As described above, hypotheses are more than just a random guess. Hypotheses should be informed by previous theories or observations and logical reasoning. Typically, we begin with a broad and general theory and use deductive reasoning to generate a more specific hypothesis to test based on that theory. Occasionally, however, when there is no theory to inform our hypothesis, we use inductive reasoning which involves using specific observations or research findings to form a more general hypothesis. Finally, the hypothesis should be positive. That is, the hypothesis should make a positive statement about the existence of a relationship or effect, rather than a statement that a relationship or effect does not exist. As scientists, we don’t set out to show that relationships do not exist or that effects do not occur so our hypotheses should not be worded in a way to suggest that an effect or relationship does not exist. The nature of science is to assume that something does not exist and then seek to find evidence to prove this wrong, to show that really it does exist. That may seem backward to you but that is the nature of the scientific method. The underlying reason for this is beyond the scope of this chapter but it has to do with statistical theory.

Key Takeaways

• A theory is broad in nature and explains larger bodies of data. A hypothesis is more specific and makes a prediction about the outcome of a particular study.
• Working with theories is not “icing on the cake.” It is a basic ingredient of psychological research.
• Like other scientists, psychologists use the hypothetico-deductive method. They construct theories to explain or interpret phenomena (or work with existing theories), derive hypotheses from their theories, test the hypotheses, and then reevaluate the theories in light of the new results.
• Practice: Find a recent empirical research report in a professional journal. Read the introduction and highlight in different colors descriptions of theories and hypotheses.
• Schwarz, N., Bless, H., Strack, F., Klumpp, G., Rittenauer-Schatka, H., & Simons, A. (1991). Ease of retrieval as information: Another look at the availability heuristic. Journal of Personality and Social Psychology, 61 , 195–202.
• Zajonc, R. B., Heingartner, A., & Herman, E. M. (1969). Social enhancement and impairment of performance in the cockroach. Journal of Personality and Social Psychology, 13 , 83–92.
• Zajonc, R.B. & Sales, S.M. (1966). Social facilitation of dominant and subordinate responses. Journal of Experimental Social Psychology, 2 , 160-168.

Developing a Hypothesis

Two girls exploring plant life in the woods (Christine Glade, iStockphoto)

How does this align with my curriculum?

Share on: facebook x/twitter linkedin pinterest.

Learn what makes a good hypothesis, and how to develop one.

Developing a Scientific Hypothesis

After identifying a  testable question , it is important for students to research and or/review what they already know about the scientific principles involved in their experimental inquiries. After that, and before conducting the inquiry through testing and observation, students need to develop a scientific  hypothesis .

Is a hypothesis the same as a guess?

The short answer is no! Anyone can make a guess about anything. Guesses are not generally based on knowledge, but rather are rough estimates that people give when they don’t know the answer to a question. A scientific hypothesis, on the other hand, is not only based on prior knowledge and experiences but also on known factual information obtained through research.

Misconception Alert Like making an estimate in math, a hypothesis should be written before doing an inquiry, not after!

Is a hypothesis the same as a prediction? 

Again, the answer is no, although the distinction between these two terms is not always clear. A  prediction  is an estimate or forecast about something that might happen or the way that something will be based on prior knowledge and experience and known facts (e.g., I predict it will rain tomorrow, I predict that my plant will have two seed leaves, etc.).

Shown is a colour photograph of a boat near a beach in the rain. The camera lens is sprinkled with rain drops. These are in sharp focus, in the foreground. Most of the rest of the photograph is out of focus in the background.  There is a strip of dark green grass along the bottom of the frame. Above that is a strip of beige sand. The water is shaded from light grey at the bottom to medium grey at the top. A dark green hill rises up behind the water, to the left. The sky is mottled with grey, white and blueish grey clouds. A small, yellow wooden rowboat is in sharp focus. It is moored to the shore with a white rope, next to a round, orange float.

Like a prediction, a hypothesis forecasts what might happen, but a hypothesis goes beyond a prediction. It includes not only what might happen, but why something might happen. In other words, it explains the relationship between variables. The most significant difference between a prediction and an hypothesis is that a hypothesis is intended to lead to a testable investigation, whereas a prediction is not.

To put it in a different way, a prediction is an estimate of an end result (e.g., I predict that the plant will be tall) whereas a hypothesis is a statement that attempts to explain a phenomena by relating cause and effect (e.g., if we give plants more water, then they will grow taller).

Shown is a colour photograph of water falling from a blue watering can onto a pink flowering plant.  The frame is filled with green foliage. In the background, out of focus, is a row of pink, flowering plants in boxes along a wooden railing. In the foreground, a gloved hand tips a large, cornflower blue watering can over the first plant.

Misconception Alert Not every inquiry lends itself to the testing of a hypothesis. Many inquiries involve research questions that ask if relationships exist among variables or involve situations where testing is not possible, such as population inquiries, historical inquiries, etc. For example, you could never test a hypothesis about which type of food a given dinosaur preferred to eat!

Shown is a colour photograph of miniature plastic dinosaurs gathered around a piece of broccoli that resembles a tree.  A piece of broccoli stands upright in the middle of the photograph. It has a long, pale green stem and a full, dark green floret. It looks like a green tree with branches and tiny leaves. Five toy dinosaurs have been placed around the broccoli so they look like they're snacking it. They are a little bit shorter than the broccoli, so their mouths reach the bushiest parts of it.  The dinosaur in the foreground is dark reddish brown with scaly-looking skin and tiny arms. Behind it, a dark green dinosaur with a long neck stretches to the low branches. In the background, a dark brown triceratops looks on. The long neck of a black dinosaur reaches in from the left, to get the higher leaves. On the far left, a bright yellow dinosaur is about to join the meal.

How do you develop a scientific hypothesis?

In order to develop a hypothesis, one should have:

• A good  testable question
• Understanding of the dependent, independent and control  variables  of interest
• Some prior knowledge, such as from observations and research
• Thoughts about how the inquiry could be done (the method)

For example, students may begin with the question:

How does the duration of light exposure affect the surface area of tomato plant leaves?

The variables are:

• Independent = duration of light
• Dependent = surface area of plant leaves
• Controlled = water, soil, seed source, etc.

How then do we formulate a hypothesis from this testable question? A good hypothesis tends to follow the format:

If  we do/change this 

Then  this will happen/be observed, because  we know this., if  these changes are made to a certain independent variable,, then  will we observe a change in a specific dependent variable, because  of our prior knowledge and research..

In the example above, the students have identified that they are interested in exploring how the duration of light affects plants, perhaps exposing plants from the same batch of seeds to light for different numbers of hours (e.g., one hour, two hours, etc.). Knowing that plants need light to grow (from prior knowledge or research), then they may hypothesize that the leaves of a plant may be larger given a longer exposure to light. Knowing all of this, their hypothesis might be:

If  we expose plants to a greater number of hours of light,  then  the surface area of the tomato plant leaves will be larger  because  light affects plant growth.

What makes for a good hypothesis.

A good hypothesis is:

• A statement  The hypothesis is  not  the same as the testable question. The hypothesis is a tentative explanation of what is thought will happen during the inquiry.
• Testable  What is changed (independent variable) and what is affected by the change (dependent variable) should be measurable and observable.
• Falsifiable  A good hypothesis can be either supported or shown to be false by the data collected.
• Clear.  It should be obvious what will be tested, how it will be tested (what will be measured to prove or disprove the hypothesis), and what is expected to happen.

A good question and hypothesis should also help students find answers that are not obvious to them or generally known. For example, most students will know that if you do not water a plant, it will die, so developing a hypothesis such as:

If  we stop watering our plants  then  the plants will die  because  plants need water in order to live.

is overly simplistic and will not help students expand their knowledge. A good experimental inquiry will help students discover things they do not already know.

Misconception Alert The goal of a hypothesis is NOT for a student to be “right.” Having evidence that shows a hypothesis to be false is just as important as having evidence that shows it to be true. A hypothesis is NOT something you prove – it is something you test!

How to develop a Tomatosphere™ hypothesis 

In the Seed Investigation, a testable question is provided to the students:

How does exposure to the space environment or space-like conditions affect the number of tomato seeds that germinate?

In the  variables  section, the dependent and independent variables were identified.

Independent variable :  Seed treatment – Some seeds have been to space or are exposed to space-like conditions in years when seeds do not go to space, while some seeds have not been to space or exposed to space-like conditions.

Dependent variable : Number of seeds that germinate.

What is not provided to the students is a hypothesis to follow from this question. Using the “if…..then…because….” format, have the students develop their hypotheses for the Tomatosphere™ testable question. For example:

If  tomato plant seeds are exposed to the conditions of space,  then  fewer ‘space’ seeds will germinate than non- ‘space’ seeds  because  radiation levels found in space may damage cells in the seeds.

This is not the only possible hypothesis, but it shows some understanding of how plants might be affected by space conditions (e.g., radiation affecting DNA in cells, microgravity affecting growth, etc.) which might be derived from prior knowledge or research.

Is this a good hypothesis? Yes

• It is a statement.
• It is testable.  What is changed (being in space or not) and what is affected by the change (number of seeds germinated) can be measured and observed.
• It is falsifiable.  The student can use the data collected to be able to decide if it supports their hypothesis or if it shows the hypothesis is false (statement is false – more ‘space’ seeds germinate or the germination rate is the same).
• It is clear.  It should be obvious what will be tested (seed germination), how it will be tested (seeds are grown to the point of germination), and what is expected to happen (fewer space seeds will germinate).

To assist with practicing writing a hypothesis, students could be provided with a checklist, such as this one, also available as a [ Google doc ] and [ PDF ].

Writing a Strong Hypothesis Checklist

Hypothesis is a statement that correctly follows the format:

"If _____ then ______ because _________

Hypothesis relates to the Testable Question

Hypothesis makes sense (based on observations and/or research)

Hypothesis can be falsified

Hypothesis includes a cause and effect relationship

Hypothesis could be tested with measurements

Hypothesis is easy to understand

Guided Practice

Have students read the following statements and determine if these are good, okay, or poor hypotheses and why.

Have students use the  Writing a Strong Hypothesis Checklist  for creating a Tomatosphere™ or other hypothesis.

Why is this a good hypothesis? ✓  It is a  statement  that follows the “if….then…because” format. ✓ It is testable.  What is changed (red light vs. green light) and what is affected by the change (size of leaves) is measurable and observable. ✓ It is falsifiable.  It can be supported by evidence (statement is true – leaves will be bigger, statement is untrue – leaves will be smaller or the same size). ✓ It is clear.  It is obvious what will be tested (two colours of light), how it will be tested (at six weeks of age the plant leaves will be measured), and what is expected to happen (plants grown in red light will have bigger leaves). B): 

Why is this a poor hypothesis? ✓  It is a  statement  that follows the “if….then…because” format. ✓ It is not testable.  The variables are very vague. What are the classroom conditions compared to the outdoor conditions? Is the interest in soil? Light? Temperature? What kinds of plants will be grown. ✗ It is not falsifiable.  It would be difficult to support or falsify with evidence because it is vague. ✗ It is not clear.  It is not obvious what will be tested (Soil? Temperature? Light?), how it will be tested and what is expected to happen (what does “better” mean? Taller? Bigger leaves? Flower sooner?). Have students work on changing this vague hypothesis into a more specific one by identifying variables to explore. C): 

Why is this just an “okay” hypothesis? ✓  It is a  statement  that follows the “if….then…because” format. ✗ It is somewhat testable.  What is changed (sugar water vs. regular water) is clear, but what is affected by the change (“better”) is vague. Will the plants be taller? Grow faster? ✗ It is not falsifiable.  It would be difficult to support or falsify with evidence because the “better” is vague. ✗ It is somewhat clear.   It is obvious what will be tested (maple syrup being added to the water) and how it will be tested, but what is expected to happen is not clear (what does “better” mean? Taller? Bigger leaves? Flower sooner?). Have students work on changing this somewhat vague hypothesis into a more specific one by identifying a dependent variable.

A Strong Hypothesis - Science Buddies  (2010) This blog post by Science Buddies explains the parts of a good hypothesis, and the role a hypothesis plays in the scientific process.

Theory vs. Hypothesis vs. Law… Explained!  (2015) This video (7:11 min.) from PBS Studios Be Smart explains how these words mean something totally different in science than in everyday speech, and how they all help us understand how the universe works.

Misconceptions about Science This page by Understanding Science at UC Berkeley gives a thorough definition of the word hypothesis, in a scientific context, as opposed to everyday language.

What is a Scientific Hypothesis?  (2022) This article by Alina Bradford at Live Science discusses what makes a hypothesis testable, the different types of hypotheses, and hypothesis vs. theory.

Writing a Hypothesis  (2013) This video (4:58 min.) by mreppsclassroom explains the purpose of a hypothesis and how to construct one.

Related Topics

The Scientific Method Lesson Plan: Developing Hypotheses

Submitted by: charlie conway.

This is a lesson plan designed to be incorporated into a elementary or middle school general science class. Using BrainPOP and its resources, students will be introduced (or further exposed) to the steps necessary to undertake scientific experimentation leading (perhaps) to a Science Fair project. The Scientific Method is a core structure in learning about scientific inquiry, and although there are many variations of this set of procedures, they all usually have similar components. This lesson should take 45-60 minutes, with opportunities for extending the lesson further.

Students will:

• Students will use BrainPOP features to build their understandings of the Scientific Method.
• Students will learn how to identify and write effective hypotheses.
• Students will use game play to write an appropriate hypothesis for an experiment.
• Students will identify and utilize the tools necessary to design a scientific investigation.
• Laptops/Computers
• Interactive White Board
• Pencil/Paper
• Class set of photocopies of the Scientific Method Flow Chart
• BrainPOP accounts (optional)

Vocabulary:

Preparation:.

These procedures may be modified according to the needs/resources of each teacher & class. For example, you may decide to do the quiz with pencil/paper, or do the quiz as a class.

Lesson Procedure:

• Ask the students how scientists answer questions and solve problems. Take a few minutes to explore students' prior knowledge with a short discussion.
• Tell the class that you're going to watch a BrainPOP movie about answering a scientific question about plant growth.
• Show the BrainPOP movie on the Scientific Method two times. The first time, students should just watch and listen. The second time they should take notes. Pause the movie at critical STOP points.
• Students should log on to their individual student accounts and take the Scientific Method Quiz to give the teacher some immediate feedback. (This can also be done as a pre-assessment, or at the very end of the lesson). NOTE: If you choose to, you can give a pencil/paper quiz also; students who work best with electronic media can be given accommodations). If you don't have access to individual student logins via MyBrainPOP (a school subscription), students can take the Review Quiz or paper quiz instead.
• Discuss the main points from the movie: a. Write the definition of the scientific method: the procedure scientists use to help explain why things happen. b. Make a list on the board of the steps mentioned as part of the scientific method: problem, fact finding, observation, inference, hypothesis, experiment, conclusions. c. Tell students that there are various versions of the scientific method that they may see, but they are all basically the same.
• Hand out the Scientific Method Flow Chart . Introduce the "If...then...because..." format for writing hypotheses. Give the students 10 minutes to complete the sheet with their group. They may use their notes from the movie to help them, and/or work collaboratively with other students.
• Discuss some of the student responses in class. Focus on the hypotheses, and explain that a good hypothesis is a testable explanation of the problem. For example, a good hypothesis to the third problem would be, "If I move farther away from the microwave oven, then the cell phone signal will improve because I am further away from the source of interference." Show how this is a TESTABLE hypothesis that can lead to a scientific experiment.
• Introduce the students to the Pavlov’s Dog game in GameUP. Allow time for the kids to explore the game without telling them why they are playing it.
• After 10-15 minutes, have the students take a break from playing, and have a short discussion about the game. Ask if anyone was able to complete the task successfully, and have them share how they got the "diploma." If time allows, show the students how to complete the task so that they all understand that the dog has been conditioned to respond to a stimulus (noise before food has been introduced).
• Have the students write a hypothesis that Pavlov may have written before he started his experiment. Students can either do this with pencil/paper, or the teacher may create a BrainPOP quiz and have students submit their hypothesis electronically. This may be used as a part of the assessment.
• Choose some sample responses from the students, highlighting the hypotheses that are TESTABLE, and not just guesses or predictions.

If this lesson is an introduction to allowing students to plan and carry out their own experiments, then all that follows is naturally an extension to the lesson.

Other, shorter extensions are easy to develop as well.

Extension Activities:

• BrainPOP Jr. (K-3)
• BrainPOP ELL
• BrainPOP Science
• BrainPOP Español
• BrainPOP Français
• Set Up Accounts
• Single Sign-on
• Manage Subscription
• Quick Tours
• About BrainPOP

• Terms of Use
• Privacy Policy
• Trademarks & Copyrights

If you're seeing this message, it means we're having trouble loading external resources on our website.

If you're behind a web filter, please make sure that the domains *.kastatic.org and *.kasandbox.org are unblocked.

To log in and use all the features of Khan Academy, please enable JavaScript in your browser.

Mechanics (Essentials) - Class 11th

Course: mechanics (essentials) - class 11th   >   unit 2.

• Introduction to physics
• What is physics?

The scientific method

• Models and Approximations in Physics

Introduction

• Make an observation.
• Ask a question.
• Form a hypothesis , or testable explanation.
• Make a prediction based on the hypothesis.
• Test the prediction.
• Iterate: use the results to make new hypotheses or predictions.

Scientific method example: Failure to toast

1. make an observation..

• Observation: the toaster won't toast.

2. Ask a question.

• Question: Why won't my toaster toast?

3. Propose a hypothesis.

• Hypothesis: Maybe the outlet is broken.

4. Make predictions.

• Prediction: If I plug the toaster into a different outlet, then it will toast the bread.

5. Test the predictions.

• Test of prediction: Plug the toaster into a different outlet and try again.
• If the toaster does toast, then the hypothesis is supported—likely correct.
• If the toaster doesn't toast, then the hypothesis is not supported—likely wrong.

Logical possibility

Practical possibility, building a body of evidence, 6. iterate..

• Iteration time!
• If the hypothesis was supported, we might do additional tests to confirm it, or revise it to be more specific. For instance, we might investigate why the outlet is broken.
• If the hypothesis was not supported, we would come up with a new hypothesis. For instance, the next hypothesis might be that there's a broken wire in the toaster.

Want to join the conversation?

Choose Your Test

Sat / act prep online guides and tips, what is a hypothesis and how do i write one.

General Education

Think about something strange and unexplainable in your life. Maybe you get a headache right before it rains, or maybe you think your favorite sports team wins when you wear a certain color. If you wanted to see whether these are just coincidences or scientific fact, you would form a hypothesis, then create an experiment to see whether that hypothesis is true or not.

But what is a hypothesis, anyway? If you’re not sure about what a hypothesis is--or how to test for one!--you’re in the right place. This article will teach you everything you need to know about hypotheses, including: 

• Defining the term “hypothesis” 
• Providing hypothesis examples 
• Giving you tips for how to write your own hypothesis

So let’s get started!

What Is a Hypothesis?

Merriam Webster defines a hypothesis as “an assumption or concession made for the sake of argument.” In other words, a hypothesis is an educated guess . Scientists make a reasonable assumption--or a hypothesis--then design an experiment to test whether it’s true or not. Keep in mind that in science, a hypothesis should be testable. You have to be able to design an experiment that tests your hypothesis in order for it to be valid. 

As you could assume from that statement, it’s easy to make a bad hypothesis. But when you’re holding an experiment, it’s even more important that your guesses be good...after all, you’re spending time (and maybe money!) to figure out more about your observation. That’s why we refer to a hypothesis as an educated guess--good hypotheses are based on existing data and research to make them as sound as possible.

Hypotheses are one part of what’s called the scientific method .  Every (good) experiment or study is based in the scientific method. The scientific method gives order and structure to experiments and ensures that interference from scientists or outside influences does not skew the results. It’s important that you understand the concepts of the scientific method before holding your own experiment. Though it may vary among scientists, the scientific method is generally made up of six steps (in order):

• Observation
• Asking questions
• Forming a hypothesis
• Analyze the data
• Communicate your results

You’ll notice that the hypothesis comes pretty early on when conducting an experiment. That’s because experiments work best when they’re trying to answer one specific question. And you can’t conduct an experiment until you know what you’re trying to prove!

Independent and Dependent Variables 

After doing your research, you’re ready for another important step in forming your hypothesis: identifying variables. Variables are basically any factor that could influence the outcome of your experiment . Variables have to be measurable and related to the topic being studied.

There are two types of variables:  independent variables and dependent variables. I ndependent variables remain constant . For example, age is an independent variable; it will stay the same, and researchers can look at different ages to see if it has an effect on the dependent variable. 

Speaking of dependent variables... dependent variables are subject to the influence of the independent variable , meaning that they are not constant. Let’s say you want to test whether a person’s age affects how much sleep they need. In that case, the independent variable is age (like we mentioned above), and the dependent variable is how much sleep a person gets. 

Variables will be crucial in writing your hypothesis. You need to be able to identify which variable is which, as both the independent and dependent variables will be written into your hypothesis. For instance, in a study about exercise, the independent variable might be the speed at which the respondents walk for thirty minutes, and the dependent variable would be their heart rate. In your study and in your hypothesis, you’re trying to understand the relationship between the two variables.

Elements of a Good Hypothesis

The best hypotheses start by asking the right questions . For instance, if you’ve observed that the grass is greener when it rains twice a week, you could ask what kind of grass it is, what elevation it’s at, and if the grass across the street responds to rain in the same way. Any of these questions could become the backbone of experiments to test why the grass gets greener when it rains fairly frequently.

As you’re asking more questions about your first observation, make sure you’re also making more observations . If it doesn’t rain for two weeks and the grass still looks green, that’s an important observation that could influence your hypothesis. You'll continue observing all throughout your experiment, but until the hypothesis is finalized, every observation should be noted.

Finally, you should consult secondary research before writing your hypothesis . Secondary research is comprised of results found and published by other people. You can usually find this information online or at your library. Additionally, m ake sure the research you find is credible and related to your topic. If you’re studying the correlation between rain and grass growth, it would help you to research rain patterns over the past twenty years for your county, published by a local agricultural association. You should also research the types of grass common in your area, the type of grass in your lawn, and whether anyone else has conducted experiments about your hypothesis. Also be sure you’re checking the quality of your research . Research done by a middle school student about what minerals can be found in rainwater would be less useful than an article published by a local university.

Writing Your Hypothesis

Once you’ve considered all of the factors above, you’re ready to start writing your hypothesis. Hypotheses usually take a certain form when they’re written out in a research report.

When you boil down your hypothesis statement, you are writing down your best guess and not the question at hand . This means that your statement should be written as if it is fact already, even though you are simply testing it.

The reason for this is that, after you have completed your study, you'll either accept or reject your if-then or your null hypothesis. All hypothesis testing examples should be measurable and able to be confirmed or denied. You cannot confirm a question, only a statement! 

In fact, you come up with hypothesis examples all the time! For instance, when you guess on the outcome of a basketball game, you don’t say, “Will the Miami Heat beat the Boston Celtics?” but instead, “I think the Miami Heat will beat the Boston Celtics.” You state it as if it is already true, even if it turns out you’re wrong. You do the same thing when writing your hypothesis.

Additionally, keep in mind that hypotheses can range from very specific to very broad.  These hypotheses can be specific, but if your hypothesis testing examples involve a broad range of causes and effects, your hypothesis can also be broad.  

The Two Types of Hypotheses

Now that you understand what goes into a hypothesis, it’s time to look more closely at the two most common types of hypothesis: the if-then hypothesis and the null hypothesis.

#1: If-Then Hypotheses

First of all, if-then hypotheses typically follow this formula:

If ____ happens, then ____ will happen.

The goal of this type of hypothesis is to test the causal relationship between the independent and dependent variable. It’s fairly simple, and each hypothesis can vary in how detailed it can be. We create if-then hypotheses all the time with our daily predictions. Here are some examples of hypotheses that use an if-then structure from daily life: 

• If I get enough sleep, I’ll be able to get more work done tomorrow.
• If the bus is on time, I can make it to my friend’s birthday party. 
• If I study every night this week, I’ll get a better grade on my exam. 

In each of these situations, you’re making a guess on how an independent variable (sleep, time, or studying) will affect a dependent variable (the amount of work you can do, making it to a party on time, or getting better grades). 

You may still be asking, “What is an example of a hypothesis used in scientific research?” Take one of the hypothesis examples from a real-world study on whether using technology before bed affects children’s sleep patterns. The hypothesis read s:

“We hypothesized that increased hours of tablet- and phone-based screen time at bedtime would be inversely correlated with sleep quality and child attention.”

It might not look like it, but this is an if-then statement. The researchers basically said, “If children have more screen usage at bedtime, then their quality of sleep and attention will be worse.” The sleep quality and attention are the dependent variables and the screen usage is the independent variable. (Usually, the independent variable comes after the “if” and the dependent variable comes after the “then,” as it is the independent variable that affects the dependent variable.) This is an excellent example of how flexible hypothesis statements can be, as long as the general idea of “if-then” and the independent and dependent variables are present.

#2: Null Hypotheses

Your if-then hypothesis is not the only one needed to complete a successful experiment, however. You also need a null hypothesis to test it against. In its most basic form, the null hypothesis is the opposite of your if-then hypothesis . When you write your null hypothesis, you are writing a hypothesis that suggests that your guess is not true, and that the independent and dependent variables have no relationship .

One null hypothesis for the cell phone and sleep study from the last section might say: 

“If children have more screen usage at bedtime, their quality of sleep and attention will not be worse.” 

In this case, this is a null hypothesis because it’s asking the opposite of the original thesis! 

Conversely, if your if-then hypothesis suggests that your two variables have no relationship, then your null hypothesis would suggest that there is one. So, pretend that there is a study that is asking the question, “Does the amount of followers on Instagram influence how long people spend on the app?” The independent variable is the amount of followers, and the dependent variable is the time spent. But if you, as the researcher, don’t think there is a relationship between the number of followers and time spent, you might write an if-then hypothesis that reads:

“If people have many followers on Instagram, they will not spend more time on the app than people who have less.”

In this case, the if-then suggests there isn’t a relationship between the variables. In that case, one of the null hypothesis examples might say:

“If people have many followers on Instagram, they will spend more time on the app than people who have less.”

You then test both the if-then and the null hypothesis to gauge if there is a relationship between the variables, and if so, how much of a relationship. 

4 Tips to Write the Best Hypothesis

If you’re going to take the time to hold an experiment, whether in school or by yourself, you’re also going to want to take the time to make sure your hypothesis is a good one. The best hypotheses have four major elements in common: plausibility, defined concepts, observability, and general explanation.

#1: Plausibility

At first glance, this quality of a hypothesis might seem obvious. When your hypothesis is plausible, that means it’s possible given what we know about science and general common sense. However, improbable hypotheses are more common than you might think. 

Imagine you’re studying weight gain and television watching habits. If you hypothesize that people who watch more than  twenty hours of television a week will gain two hundred pounds or more over the course of a year, this might be improbable (though it’s potentially possible). Consequently, c ommon sense can tell us the results of the study before the study even begins.

Improbable hypotheses generally go against  science, as well. Take this hypothesis example: 

“If a person smokes one cigarette a day, then they will have lungs just as healthy as the average person’s.” 

This hypothesis is obviously untrue, as studies have shown again and again that cigarettes negatively affect lung health. You must be careful that your hypotheses do not reflect your own personal opinion more than they do scientifically-supported findings. This plausibility points to the necessity of research before the hypothesis is written to make sure that your hypothesis has not already been disproven.

#2: Defined Concepts

The more advanced you are in your studies, the more likely that the terms you’re using in your hypothesis are specific to a limited set of knowledge. One of the hypothesis testing examples might include the readability of printed text in newspapers, where you might use words like “kerning” and “x-height.” Unless your readers have a background in graphic design, it’s likely that they won’t know what you mean by these terms. Thus, it’s important to either write what they mean in the hypothesis itself or in the report before the hypothesis.

Here’s what we mean. Which of the following sentences makes more sense to the common person?

If the kerning is greater than average, more words will be read per minute.

If the space between letters is greater than average, more words will be read per minute.

For people reading your report that are not experts in typography, simply adding a few more words will be helpful in clarifying exactly what the experiment is all about. It’s always a good idea to make your research and findings as accessible as possible. 

Good hypotheses ensure that you can observe the results. 

#3: Observability

In order to measure the truth or falsity of your hypothesis, you must be able to see your variables and the way they interact. For instance, if your hypothesis is that the flight patterns of satellites affect the strength of certain television signals, yet you don’t have a telescope to view the satellites or a television to monitor the signal strength, you cannot properly observe your hypothesis and thus cannot continue your study.

Some variables may seem easy to observe, but if you do not have a system of measurement in place, you cannot observe your hypothesis properly. Here’s an example: if you’re experimenting on the effect of healthy food on overall happiness, but you don’t have a way to monitor and measure what “overall happiness” means, your results will not reflect the truth. Monitoring how often someone smiles for a whole day is not reasonably observable, but having the participants state how happy they feel on a scale of one to ten is more observable. 

In writing your hypothesis, always keep in mind how you'll execute the experiment.

#4: Generalizability 

Perhaps you’d like to study what color your best friend wears the most often by observing and documenting the colors she wears each day of the week. This might be fun information for her and you to know, but beyond you two, there aren’t many people who could benefit from this experiment. When you start an experiment, you should note how generalizable your findings may be if they are confirmed. Generalizability is basically how common a particular phenomenon is to other people’s everyday life.

Let’s say you’re asking a question about the health benefits of eating an apple for one day only, you need to realize that the experiment may be too specific to be helpful. It does not help to explain a phenomenon that many people experience. If you find yourself with too specific of a hypothesis, go back to asking the big question: what is it that you want to know, and what do you think will happen between your two variables?

Hypothesis Testing Examples

We know it can be hard to write a good hypothesis unless you’ve seen some good hypothesis examples. We’ve included four hypothesis examples based on some made-up experiments. Use these as templates or launch pads for coming up with your own hypotheses.

Experiment #1: Students Studying Outside (Writing a Hypothesis)

You are a student at PrepScholar University. When you walk around campus, you notice that, when the temperature is above 60 degrees, more students study in the quad. You want to know when your fellow students are more likely to study outside. With this information, how do you make the best hypothesis possible?

You must remember to make additional observations and do secondary research before writing your hypothesis. In doing so, you notice that no one studies outside when it’s 75 degrees and raining, so this should be included in your experiment. Also, studies done on the topic beforehand suggested that students are more likely to study in temperatures less than 85 degrees. With this in mind, you feel confident that you can identify your variables and write your hypotheses:

If-then: “If the temperature in Fahrenheit is less than 60 degrees, significantly fewer students will study outside.”

Null: “If the temperature in Fahrenheit is less than 60 degrees, the same number of students will study outside as when it is more than 60 degrees.”

These hypotheses are plausible, as the temperatures are reasonably within the bounds of what is possible. The number of people in the quad is also easily observable. It is also not a phenomenon specific to only one person or at one time, but instead can explain a phenomenon for a broader group of people.

To complete this experiment, you pick the month of October to observe the quad. Every day (except on the days where it’s raining)from 3 to 4 PM, when most classes have released for the day, you observe how many people are on the quad. You measure how many people come  and how many leave. You also write down the temperature on the hour. 

After writing down all of your observations and putting them on a graph, you find that the most students study on the quad when it is 70 degrees outside, and that the number of students drops a lot once the temperature reaches 60 degrees or below. In this case, your research report would state that you accept or “failed to reject” your first hypothesis with your findings.

Experiment #2: The Cupcake Store (Forming a Simple Experiment)

Let’s say that you work at a bakery. You specialize in cupcakes, and you make only two colors of frosting: yellow and purple. You want to know what kind of customers are more likely to buy what kind of cupcake, so you set up an experiment. Your independent variable is the customer’s gender, and the dependent variable is the color of the frosting. What is an example of a hypothesis that might answer the question of this study?

Here’s what your hypotheses might look like: 

If-then: “If customers’ gender is female, then they will buy more yellow cupcakes than purple cupcakes.”

Null: “If customers’ gender is female, then they will be just as likely to buy purple cupcakes as yellow cupcakes.”

This is a pretty simple experiment! It passes the test of plausibility (there could easily be a difference), defined concepts (there’s nothing complicated about cupcakes!), observability (both color and gender can be easily observed), and general explanation ( this would potentially help you make better business decisions ).

Experiment #3: Backyard Bird Feeders (Integrating Multiple Variables and Rejecting the If-Then Hypothesis)

While watching your backyard bird feeder, you realized that different birds come on the days when you change the types of seeds. You decide that you want to see more cardinals in your backyard, so you decide to see what type of food they like the best and set up an experiment. 

However, one morning, you notice that, while some cardinals are present, blue jays are eating out of your backyard feeder filled with millet. You decide that, of all of the other birds, you would like to see the blue jays the least. This means you'll have more than one variable in your hypothesis. Your new hypotheses might look like this: 

If-then: “If sunflower seeds are placed in the bird feeders, then more cardinals will come than blue jays. If millet is placed in the bird feeders, then more blue jays will come than cardinals.”

Null: “If either sunflower seeds or millet are placed in the bird, equal numbers of cardinals and blue jays will come.”

Through simple observation, you actually find that cardinals come as often as blue jays when sunflower seeds or millet is in the bird feeder. In this case, you would reject your “if-then” hypothesis and “fail to reject” your null hypothesis . You cannot accept your first hypothesis, because it’s clearly not true. Instead you found that there was actually no relation between your different variables. Consequently, you would need to run more experiments with different variables to see if the new variables impact the results.

Experiment #4: In-Class Survey (Including an Alternative Hypothesis)

You’re about to give a speech in one of your classes about the importance of paying attention. You want to take this opportunity to test a hypothesis you’ve had for a while: 

If-then: If students sit in the first two rows of the classroom, then they will listen better than students who do not.

Null: If students sit in the first two rows of the classroom, then they will not listen better or worse than students who do not.

You give your speech and then ask your teacher if you can hand out a short survey to the class. On the survey, you’ve included questions about some of the topics you talked about. When you get back the results, you’re surprised to see that not only do the students in the first two rows not pay better attention, but they also scored worse than students in other parts of the classroom! Here, both your if-then and your null hypotheses are not representative of your findings. What do you do?

This is when you reject both your if-then and null hypotheses and instead create an alternative hypothesis . This type of hypothesis is used in the rare circumstance that neither of your hypotheses is able to capture your findings . Now you can use what you’ve learned to draft new hypotheses and test again! 

Key Takeaways: Hypothesis Writing

The more comfortable you become with writing hypotheses, the better they will become. The structure of hypotheses is flexible and may need to be changed depending on what topic you are studying. The most important thing to remember is the purpose of your hypothesis and the difference between the if-then and the null . From there, in forming your hypothesis, you should constantly be asking questions, making observations, doing secondary research, and considering your variables. After you have written your hypothesis, be sure to edit it so that it is plausible, clearly defined, observable, and helpful in explaining a general phenomenon.

Writing a hypothesis is something that everyone, from elementary school children competing in a science fair to professional scientists in a lab, needs to know how to do. Hypotheses are vital in experiments and in properly executing the scientific method . When done correctly, hypotheses will set up your studies for success and help you to understand the world a little better, one experiment at a time.

What’s Next?

If you’re studying for the science portion of the ACT, there’s definitely a lot you need to know. We’ve got the tools to help, though! Start by checking out our ultimate study guide for the ACT Science subject test. Once you read through that, be sure to download our recommended ACT Science practice tests , since they’re one of the most foolproof ways to improve your score. (And don’t forget to check out our expert guide book , too.)

If you love science and want to major in a scientific field, you should start preparing in high school . Here are the science classes you should take to set yourself up for success.

If you’re trying to think of science experiments you can do for class (or for a science fair!), here’s a list of 37 awesome science experiments you can do at home

Ashley Sufflé Robinson has a Ph.D. in 19th Century English Literature. As a content writer for PrepScholar, Ashley is passionate about giving college-bound students the in-depth information they need to get into the school of their dreams.

Ask a Question Below

Have any questions about this article or other topics? Ask below and we'll reply!

Improve With Our Famous Guides

• For All Students

The 5 Strategies You Must Be Using to Improve 160+ SAT Points

How to Get a Perfect 1600, by a Perfect Scorer

Series: How to Get 800 on Each SAT Section:

Score 800 on SAT Math

Score 800 on SAT Reading

Score 800 on SAT Writing

Series: How to Get to 600 on Each SAT Section:

Score 600 on SAT Math

Score 600 on SAT Reading

Score 600 on SAT Writing

Free Complete Official SAT Practice Tests

What SAT Target Score Should You Be Aiming For?

15 Strategies to Improve Your SAT Essay

The 5 Strategies You Must Be Using to Improve 4+ ACT Points

How to Get a Perfect 36 ACT, by a Perfect Scorer

Series: How to Get 36 on Each ACT Section:

36 on ACT English

36 on ACT Math

36 on ACT Reading

36 on ACT Science

Series: How to Get to 24 on Each ACT Section:

24 on ACT English

24 on ACT Math

24 on ACT Reading

24 on ACT Science

What ACT target score should you be aiming for?

ACT Vocabulary You Must Know

ACT Writing: 15 Tips to Raise Your Essay Score

How to Get Into Harvard and the Ivy League

How to Get a Perfect 4.0 GPA

How to Write an Amazing College Essay

What Exactly Are Colleges Looking For?

Is the ACT easier than the SAT? A Comprehensive Guide

Should you retake your SAT or ACT?

When should you take the SAT or ACT?

Stay Informed

Get the latest articles and test prep tips!

Looking for Graduate School Test Prep?

Check out our top-rated graduate blogs here:

GRE Online Prep Blog

GMAT Online Prep Blog

TOEFL Online Prep Blog

Holly R. "I am absolutely overjoyed and cannot thank you enough for helping me!”

• Researching
• 7. Hypothesis

How to write a hypothesis

Once you have created your three topic sentences , you are ready to create your hypothesis.

What is a 'hypothesis'?

A hypothesis is a single sentence answer to the Key Inquiry Question  that clearly states what your entire essay is going to argue.

It contains both the argument and the main reasons in support of your argument. Each hypothesis should clearly state the ‘answer’ to the question, followed by a ‘why’.

For Example:  

The Indigenous people of Australia were treated as second-class citizens until the 1960’s (answer) by the denial of basic political rights by State and Federal governments (why) .

How do you create a hypothesis?

Back in Step 3 of the research process, you split your Key Inquiry Question into three sub-questions .

Then at Step 6 you used the quotes from your Source Research to create answers to each of the sub-questions. These answers became your three Topic Sentences .

To create your hypothesis, you need to combine the three Topic Sentences into a single sentence answer.

By combining your three answers to the sub-questions , you are ultimately providing a complete answer to the original Key Inquiry Question .

For example:

What's next?

Need a digital Research Journal?

Additional resources

What do you need help with, download ready-to-use digital learning resources.

Copyright © History Skills 2014-2024.

Contact  via email